172 lines
5.4 KiB
Plaintext
172 lines
5.4 KiB
Plaintext
Post-installation instructions for X.Org on OpenBSD/macppc
|
|
----------------------------------------------------------
|
|
|
|
OpenBSD uses the X.Org X server on macppc.
|
|
|
|
The wsfb driver uses whatever graphics mode the console is set to
|
|
(by Mac OS) as a dumb unaccelerated framebuffer in 8 bits per pixel.
|
|
A default /etc/X11/xorg.conf is installed that uses this driver.
|
|
So you can just use 'startx' or xdm to start X without further
|
|
configuration.
|
|
|
|
To use xdm from rc.conf, it is necessary to disable /dev/ttyC0 in
|
|
/etc/ttys, change the 'status' of /dev/ttyC0 to 'off'.
|
|
|
|
Accelerated drivers
|
|
-------------------
|
|
|
|
The 'ati' driver is currently known to work on the machines with ATI
|
|
Rage 128 or Radeon cards. The 'nv' driver works for machines with
|
|
nVidia cards, although some modes may experience problems.
|
|
|
|
Use xorgconfig to build a /etc/X11/xorg.conf file before starting
|
|
the server for the first time. Or you can use the sample configuration
|
|
file appended below as a starting point.
|
|
|
|
You need to set machdep.allowaperture to 2 in /etc/sysctl.conf in
|
|
order to be able to use the X.Org accelerated drivers.
|
|
|
|
-- Cut Here for a sample /etc/X11/xorg.conf to use with the ati driver ---
|
|
Section "ServerLayout"
|
|
Identifier "Sample Config"
|
|
Screen 0 "Screen0" 0 0
|
|
InputDevice "Mouse0" "CorePointer"
|
|
InputDevice "Keyboard0" "CoreKeyboard"
|
|
EndSection
|
|
|
|
Section "Files"
|
|
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
|
|
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
|
|
FontPath "/usr/X11R6/lib/X11/fonts/OTF"
|
|
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
|
|
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
|
|
EndSection
|
|
|
|
Section "InputDevice"
|
|
Identifier "Keyboard0"
|
|
Driver "keyboard"
|
|
Option "Protocol" "standard"
|
|
Option "XkbRules" "xorg"
|
|
Option "XkbModel" "macintosh"
|
|
Option "XkbLayout" "us"
|
|
EndSection
|
|
|
|
Section "InputDevice"
|
|
Identifier "Mouse0"
|
|
Driver "mouse"
|
|
Option "Protocol" "wsmouse"
|
|
Option "Device" "/dev/wsmouse"
|
|
Option "ZAxisMapping" "4 5"
|
|
EndSection
|
|
|
|
Section "Monitor"
|
|
Identifier "Monitor"
|
|
VendorName "Generic"
|
|
ModelName "TwentyOneInches"
|
|
# Adjust those to your monitor or it will be destroyed !!
|
|
HorizSync 31.5-90
|
|
VertRefresh 50-100
|
|
# This mode line can be used on the Ti PBG4
|
|
# Modeline "1152x768" 64.995 1152 1213 1349 1472 768 771 777 806 -HSync -VSync
|
|
# This mode line can be used on the ibook 600
|
|
# ModeLine "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806
|
|
EndSection
|
|
|
|
Section "Device"
|
|
Identifier "Card0"
|
|
Driver "ati"
|
|
VendorName "ATI"
|
|
BoardName "Rage 128 Pro PF"
|
|
BusID "PCI:0:16:0"
|
|
# These options are required for use on the Ti PBG4.
|
|
# Option "PanelWidth" "1152"
|
|
# Option "PanelHeight" "768"
|
|
# This option enable quirks for specified Mac model, details in Radeon(4)
|
|
# Option "MacModel" "ibook"
|
|
|
|
EndSection
|
|
|
|
# Use the following "Device" section instead for wsfb
|
|
#
|
|
# Section "Device"
|
|
# Identifier "Card0"
|
|
# Driver "wsfb"
|
|
# Option "device" "/dev/ttyC0"
|
|
# EndSection
|
|
|
|
Section "Screen"
|
|
Identifier "Screen0"
|
|
Device "Card0"
|
|
Monitor "Monitor"
|
|
# Perhaps change this to DefaultDepth 24 for ati
|
|
DefaultDepth 8
|
|
SubSection "Display"
|
|
Depth 8
|
|
# For PBG4 uncomment
|
|
# Modes "1152x768" "1024x768"
|
|
EndSubSection
|
|
SubSection "Display"
|
|
Depth 16
|
|
# For PBG4 uncomment
|
|
# Modes "1152x768" "1024x768"
|
|
EndSubSection
|
|
SubSection "Display"
|
|
Depth 24
|
|
# For PBG4 uncomment
|
|
# Modes "1152x768" "1024x768"
|
|
EndSubSection
|
|
EndSection
|
|
--- Cut Here ---
|
|
|
|
Mousekeys (Or how to deal with a One Button Mouse)
|
|
--------------------------------------------------
|
|
|
|
Using the mousekeys feature of Xorg, it is possible to emulate
|
|
button2 and button3, since Apple does not seem to build hardware with
|
|
them. Other mouse operations can also be emulated using the keyboard.
|
|
To see the default key mappings, look at /etc/X11/xkb/compat/mousekeys.
|
|
These are not enabled by default. It is necessary to bind a key to
|
|
the Pointer_EnableKeys action. For the PBG4 a good setting for
|
|
this is using the Enter key next to or near the space bar (US keymap).
|
|
This can be bound by using the following xmodmap command.
|
|
--
|
|
xmodmap -e "keysym Mode_switch = Mode_switch Pointer_EnableKeys"
|
|
--
|
|
With xmodmap above run, {:-<shift>-:}<ctrl><enter> (not return) will
|
|
toggle the Pointer_EnableKeys mode allowing the key to be
|
|
used either as a mouse action or as the real key.
|
|
|
|
For other keyboards/setups, both "Mode_switch" strings in the xmodmap
|
|
command can be changed to another key. xev(1) can be used to determine
|
|
the name associated with a key.
|
|
|
|
The following is a diff to the mousekeys file which simplifies
|
|
mousekey usage on the PBG4, It could be used with other keyboards,
|
|
this is not specific to the PBG4. It changes the default mousekey
|
|
behavior of the keypad 0 and keypad Decimal (period) to act as mouse
|
|
button 2 and mouse button 3 respectively.
|
|
|
|
--- mousekeys.orig Sat Oct 13 11:09:31 2001
|
|
+++ /etc/X11/xkb/compat/mousekeys Sat Oct 13 11:12:34 2001
|
|
@@ -104,14 +104,14 @@
|
|
};
|
|
|
|
interpret KP_0 {
|
|
- action = LockPointerButton(button=default,affect=lock);
|
|
+ action= PointerButton(button=2);
|
|
};
|
|
interpret KP_Insert {
|
|
action = LockPointerButton(button=default,affect=lock);
|
|
};
|
|
|
|
interpret KP_Decimal {
|
|
- action = LockPointerButton(button=default,affect=unlock);
|
|
+ action= PointerButton(button=3);
|
|
};
|
|
interpret KP_Delete {
|
|
action = LockPointerButton(button=default,affect=unlock);
|
|
|
|
problem_blurb
|
|
|
|
$OpenBSD: README.macppc,v 1.5 2009/01/03 08:18:10 matthieu Exp $
|