135 lines
4.2 KiB
Groff
135 lines
4.2 KiB
Groff
.\" $XFree86: xc/programs/Xserver/hw/xfree86/drivers/nsc/nsc.man,v 1.1 2002/12/10 15:12:23 alanh Exp $
|
|
.\" shorthand for double quote that works everywhere.
|
|
.ds q \N'34'
|
|
.TH NSC __drivermansuffix__ __vendorversion__
|
|
.SH NAME
|
|
nsc \- Nsc video driver
|
|
.SH SYNOPSIS
|
|
.nf
|
|
.B "Section \*qDevice\*q"
|
|
.BI " Identifier \*q" devname \*q
|
|
.B " Driver \*qnsc\*q"
|
|
\ \ ...
|
|
.B EndSection
|
|
.fi
|
|
.SH DESCRIPTION
|
|
.B nsc
|
|
is an __xservername__ driver for National Semiconductors GEODE processor family.
|
|
It uses the DURANGO kit provided by National Semiconductor.
|
|
The driver is accelerated, and provides support for the following
|
|
framebuffer depths: 8, 16 and 24.
|
|
.SH SUPPORTED HARDWARE
|
|
The
|
|
.B nsc
|
|
driver supports GXLV (5530 companion chip), SC1200, SC1400 and
|
|
GX2 (5535 companion chip).
|
|
.SH CONFIGURATION DETAILS
|
|
Please refer to __xconfigfile__(__filemansuffix__) for general configuration
|
|
details. This section only covers configuration details specific to this
|
|
driver.
|
|
.PP
|
|
The driver will auto-detect the amount of video memory present for all
|
|
chips. If the amount of memory is detected incorrectly, the actual amount
|
|
of video memory should be specified with a
|
|
.B VideoRam
|
|
entry in the config file
|
|
.B \*qDevice\*q
|
|
section.
|
|
.PP
|
|
The following driver
|
|
.B Options
|
|
are supported:
|
|
.TP
|
|
.BI "Option \*qSWCursor\*q \*q" boolean \*q
|
|
Enable or disable the SW cursor.
|
|
Default: off.
|
|
.TP
|
|
.BI "Option \*qHWCursor\*q \*q" boolean \*q
|
|
Enable or disable the HW cursor.
|
|
Default: on.
|
|
.TP
|
|
.BI "Option \*qNoAccel\*q \*q" boolean \*q
|
|
Disable or enable acceleration.
|
|
Default: acceleration is enabled.
|
|
.TP
|
|
.BI "Option \*qNoCompression\*q \*q" boolean \*q
|
|
Disable or enable compression.
|
|
Default: compression is enabled.
|
|
.TP
|
|
.BI "Option \*qShadowFB\*q \*q" boolean \*q
|
|
Enable or disable use of the shadow framebuffer layer.
|
|
Default: off.
|
|
.TP
|
|
.BI "Option \*qRotate\*q \*qCW\*q"
|
|
Rotate the display clockwise. This mode is unaccelerated, and uses
|
|
the Shadow Frame Buffer layer.
|
|
Default: no rotation.
|
|
.TP
|
|
.BI "Option \*qRotate\*q \*qCCW\*q"
|
|
Rotate the display counterclockwise. This mode is unaccelerated, and
|
|
uses the Shadow Frame Buffer layer.
|
|
Default: no rotation.
|
|
.TP
|
|
.BI "Option \*qFlatPanel\*q \*q" boolean \*q
|
|
This enables the FlatPanel display unit. The FlatPanel depends on the
|
|
BIOS to do the Panel h/w initialization.
|
|
In GX2 based platforms with TFT part Flatpanel is enabled, and on CRT
|
|
part is disabled.
|
|
Default: off.
|
|
.TP
|
|
.BI "Option \*qOSMImageBuffers\*q \*q" integer \*q
|
|
This sets the number of scanline buffers to be allocated in offscreen
|
|
memory for acceleration. This can take any value 0 will disable the
|
|
allocation. Disabled if cannot allocate requested scanline memory.
|
|
Default: 20.
|
|
.TP
|
|
.BI "Option \*qColorKey\*q \*q" integer \*q
|
|
This sets the default pixel value for the YUV video overlay key.
|
|
Default: 0.
|
|
.PP
|
|
The following
|
|
.B Options
|
|
are supported only on SC1200 based platforms:
|
|
.TP
|
|
.BI "Option \*qTV\*q \*qPAL-768x576\*q"
|
|
Selects the PAL TV display mode 768x576 and the depth is forced to 16 bpp.
|
|
Default: no TV.
|
|
.TP
|
|
.BI "Option \*qTV\*q \*qPAL-720x576\*q"
|
|
Selects the PAL TV display mode 720x576 and the depth is forced to 16 bpp.
|
|
Default: no TV.
|
|
.TP
|
|
.BI "Option \*qTV\*q \*qNTSC-720x480\*q"
|
|
Selects the NTSC TV display mode 720x480 and the depth is forced to 16 bpp.
|
|
Default: no TV.
|
|
.TP
|
|
.BI "Option \*qTV\*q \*qNTSC-640x480\*q"
|
|
Selects the NTSC TV display mode 640x480 and the depth is forced to 16 bpp.
|
|
Default: no TV.
|
|
.TP
|
|
.BI "Option \*qTV_Output\*q \*qCOMPOSITE\*q"
|
|
The selected TV mode output is coded for Composite signal.
|
|
Default: no TV.
|
|
.TP
|
|
.BI "Option \*qTV_Output\*q \*qSVIDEO\*q"
|
|
The selected TV mode output is coded for SVIDEO signal.
|
|
Default: no TV.
|
|
.TP
|
|
.BI "Option \*qTV_Output\*q \*qYUV\*q"
|
|
The selected TV mode output is coded for YUV signal.
|
|
Default: no TV.
|
|
.TP
|
|
.BI "Option \*qTV_Output\*q \*qSCART\*q"
|
|
The selected TV mode output is coded for SCART signal.
|
|
Default: no TV.
|
|
.TP
|
|
.BI "Option \*qTVOverscan\*q \*xx:yy:ww:hh\*q"
|
|
This option will let only the viewable display area smaller to be able to
|
|
view on TV. The parameters xx: X-offset, yy: Y-offset, ww: Viewable width,
|
|
hh: Viewable height.
|
|
Default: no TV.
|
|
.SH "SEE ALSO"
|
|
__xservername__(__appmansuffix__), __xconfigfile__(__filemansuffix__), xorgconfig(__appmansuffix__), Xserver(__appmansuffix__), X(__miscmansuffix__)
|
|
.SH AUTHOR
|
|
Author: Sarma V. Kolluru
|