/* * Copyright © 2006 Keith Packard * * Permission to use, copy, modify, distribute, and sell this software and its * documentation for any purpose is hereby granted without fee, provided that * the above copyright notice appear in all copies and that both that copyright * notice and this permission notice appear in supporting documentation, and * that the name of the copyright holders not be used in advertising or * publicity pertaining to distribution of the software without specific, * written prior permission. The copyright holders make no representations * about the suitability of this software for any purpose. It is provided "as * is" without express or implied warranty. * * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE * OF THIS SOFTWARE. */ #ifndef _XF86CRTC_H_ #define _XF86CRTC_H_ #include #include "randrstr.h" #if XF86_MODES_RENAME #include "xf86Rename.h" #endif #include "xf86Modes.h" #include "xf86Cursor.h" #include "xf86i2c.h" #include "damage.h" #include "picturestr.h" /* Compat definitions for older X Servers. */ #ifndef M_T_PREFERRED #define M_T_PREFERRED 0x08 #endif #ifndef M_T_DRIVER #define M_T_DRIVER 0x40 #endif #ifndef M_T_USERPREF #define M_T_USERPREF 0x80 #endif #ifndef HARDWARE_CURSOR_ARGB #define HARDWARE_CURSOR_ARGB 0x00004000 #endif typedef struct _xf86Crtc xf86CrtcRec, *xf86CrtcPtr; typedef struct _xf86Output xf86OutputRec, *xf86OutputPtr; /* define a standard for connector types */ typedef enum _xf86ConnectorType { XF86ConnectorNone, XF86ConnectorVGA, XF86ConnectorDVI_I, XF86ConnectorDVI_D, XF86ConnectorDVI_A, XF86ConnectorComposite, XF86ConnectorSvideo, XF86ConnectorComponent, XF86ConnectorLFP, XF86ConnectorProprietary, XF86ConnectorHDMI, XF86ConnectorDisplayPort, } xf86ConnectorType; typedef enum _xf86OutputStatus { XF86OutputStatusConnected, XF86OutputStatusDisconnected, XF86OutputStatusUnknown } xf86OutputStatus; typedef struct _xf86CrtcFuncs { /** * Turns the crtc on/off, or sets intermediate power levels if available. * * Unsupported intermediate modes drop to the lower power setting. If the * mode is DPMSModeOff, the crtc must be disabled sufficiently for it to * be safe to call mode_set. */ void (*dpms)(xf86CrtcPtr crtc, int mode); /** * Saves the crtc's state for restoration on VT switch. */ void (*save)(xf86CrtcPtr crtc); /** * Restore's the crtc's state at VT switch. */ void (*restore)(xf86CrtcPtr crtc); /** * Lock CRTC prior to mode setting, mostly for DRI. * Returns whether unlock is needed */ Bool (*lock) (xf86CrtcPtr crtc); /** * Unlock CRTC after mode setting, mostly for DRI */ void (*unlock) (xf86CrtcPtr crtc); /** * Callback to adjust the mode to be set in the CRTC. * * This allows a CRTC to adjust the clock or even the entire set of * timings, which is used for panels with fixed timings or for * buses with clock limitations. */ Bool (*mode_fixup)(xf86CrtcPtr crtc, DisplayModePtr mode, DisplayModePtr adjusted_mode); /** * Prepare CRTC for an upcoming mode set. */ void (*prepare)(xf86CrtcPtr crtc); /** * Callback for setting up a video mode after fixups have been made. */ void (*mode_set)(xf86CrtcPtr crtc, DisplayModePtr mode, DisplayModePtr adjusted_mode, int x, int y); /** * Commit mode changes to a CRTC */ void (*commit)(xf86CrtcPtr crtc); /* Set the color ramps for the CRTC to the given values. */ void (*gamma_set)(xf86CrtcPtr crtc, CARD16 *red, CARD16 *green, CARD16 *blue, int size); /** * Allocate the shadow area, delay the pixmap creation until needed */ void * (*shadow_allocate) (xf86CrtcPtr crtc, int width, int height); /** * Create shadow pixmap for rotation support */ PixmapPtr (*shadow_create) (xf86CrtcPtr crtc, void *data, int width, int height); /** * Destroy shadow pixmap */ void (*shadow_destroy) (xf86CrtcPtr crtc, PixmapPtr pPixmap, void *data); /** * Set cursor colors */ void (*set_cursor_colors) (xf86CrtcPtr crtc, int bg, int fg); /** * Set cursor position */ void (*set_cursor_position) (xf86CrtcPtr crtc, int x, int y); /** * Show cursor */ void (*show_cursor) (xf86CrtcPtr crtc); /** * Hide cursor */ void (*hide_cursor) (xf86CrtcPtr crtc); /** * Load monochrome image */ void (*load_cursor_image) (xf86CrtcPtr crtc, CARD8 *image); /** * Load ARGB image */ void (*load_cursor_argb) (xf86CrtcPtr crtc, CARD32 *image); /** * Clean up driver-specific bits of the crtc */ void (*destroy) (xf86CrtcPtr crtc); /** * Less fine-grained mode setting entry point for kernel modesetting */ Bool (*set_mode_major)(xf86CrtcPtr crtc, DisplayModePtr mode, Rotation rotation, int x, int y); /** * Callback for panning. Doesn't change the mode. */ void (*set_origin)(xf86CrtcPtr crtc, int x, int y); } xf86CrtcFuncsRec, *xf86CrtcFuncsPtr; #define XF86_CRTC_VERSION 2 struct _xf86Crtc { /** * ABI versioning */ int version; /** * Associated ScrnInfo */ ScrnInfoPtr scrn; /** * Active state of this CRTC * * Set when this CRTC is driving one or more outputs */ Bool enabled; /** * Active mode * * This reflects the mode as set in the CRTC currently * It will be cleared when the VT is not active or * during server startup */ DisplayModeRec mode; Rotation rotation; PixmapPtr rotatedPixmap; void *rotatedData; /** * Position on screen * * Locates this CRTC within the frame buffer */ int x, y; /** * Desired mode * * This is set to the requested mode, independent of * whether the VT is active. In particular, it receives * the startup configured mode and saves the active mode * on VT switch. */ DisplayModeRec desiredMode; Rotation desiredRotation; int desiredX, desiredY; /** crtc-specific functions */ const xf86CrtcFuncsRec *funcs; /** * Driver private * * Holds driver-private information */ void *driver_private; #ifdef RANDR_12_INTERFACE /** * RandR crtc * * When RandR 1.2 is available, this * points at the associated crtc object */ RRCrtcPtr randr_crtc; #else void *randr_crtc; #endif /** * Current cursor is ARGB */ Bool cursor_argb; /** * Track whether cursor is within CRTC range */ Bool cursor_in_range; /** * Track state of cursor associated with this CRTC */ Bool cursor_shown; /** * Current transformation matrix */ PictTransform crtc_to_framebuffer; struct pict_f_transform f_crtc_to_framebuffer; struct pict_f_transform f_framebuffer_to_crtc; PictFilterPtr filter; xFixed *params; int nparams; int filter_width; int filter_height; Bool transform_in_use; RRTransformRec transform; Bool transformPresent; RRTransformRec desiredTransform; Bool desiredTransformPresent; /** * Bounding box in screen space */ BoxRec bounds; /** * Panning: * TotalArea: total panning area, larger than CRTC's size * TrackingArea: Area of the pointer for which the CRTC is panned * border: Borders of the displayed CRTC area which induces panning if the pointer reaches them */ BoxRec panningTotalArea; BoxRec panningTrackingArea; INT16 panningBorder[4]; /** * Clear the shadow */ Bool shadowClear; }; typedef struct _xf86OutputFuncs { /** * Called to allow the output a chance to create properties after the * RandR objects have been created. */ void (*create_resources)(xf86OutputPtr output); /** * Turns the output on/off, or sets intermediate power levels if available. * * Unsupported intermediate modes drop to the lower power setting. If the * mode is DPMSModeOff, the output must be disabled, as the DPLL may be * disabled afterwards. */ void (*dpms)(xf86OutputPtr output, int mode); /** * Saves the output's state for restoration on VT switch. */ void (*save)(xf86OutputPtr output); /** * Restore's the output's state at VT switch. */ void (*restore)(xf86OutputPtr output); /** * Callback for testing a video mode for a given output. * * This function should only check for cases where a mode can't be supported * on the output specifically, and not represent generic CRTC limitations. * * \return MODE_OK if the mode is valid, or another MODE_* otherwise. */ int (*mode_valid)(xf86OutputPtr output, DisplayModePtr pMode); /** * Callback to adjust the mode to be set in the CRTC. * * This allows an output to adjust the clock or even the entire set of * timings, which is used for panels with fixed timings or for * buses with clock limitations. */ Bool (*mode_fixup)(xf86OutputPtr output, DisplayModePtr mode, DisplayModePtr adjusted_mode); /** * Callback for preparing mode changes on an output */ void (*prepare)(xf86OutputPtr output); /** * Callback for committing mode changes on an output */ void (*commit)(xf86OutputPtr output); /** * Callback for setting up a video mode after fixups have been made. * * This is only called while the output is disabled. The dpms callback * must be all that's necessary for the output, to turn the output on * after this function is called. */ void (*mode_set)(xf86OutputPtr output, DisplayModePtr mode, DisplayModePtr adjusted_mode); /** * Probe for a connected output, and return detect_status. */ xf86OutputStatus (*detect)(xf86OutputPtr output); /** * Query the device for the modes it provides. * * This function may also update MonInfo, mm_width, and mm_height. * * \return singly-linked list of modes or NULL if no modes found. */ DisplayModePtr (*get_modes)(xf86OutputPtr output); #ifdef RANDR_12_INTERFACE /** * Callback when an output's property has changed. */ Bool (*set_property)(xf86OutputPtr output, Atom property, RRPropertyValuePtr value); #endif #ifdef RANDR_13_INTERFACE /** * Callback to get an updated property value */ Bool (*get_property)(xf86OutputPtr output, Atom property); #endif #ifdef RANDR_GET_CRTC_INTERFACE /** * Callback to get current CRTC for a given output */ xf86CrtcPtr (*get_crtc)(xf86OutputPtr output); #endif /** * Clean up driver-specific bits of the output */ void (*destroy) (xf86OutputPtr output); } xf86OutputFuncsRec, *xf86OutputFuncsPtr; #define XF86_OUTPUT_VERSION 2 struct _xf86Output { /** * ABI versioning */ int version; /** * Associated ScrnInfo */ ScrnInfoPtr scrn; /** * Currently connected crtc (if any) * * If this output is not in use, this field will be NULL. */ xf86CrtcPtr crtc; /** * Possible CRTCs for this output as a mask of crtc indices */ CARD32 possible_crtcs; /** * Possible outputs to share the same CRTC as a mask of output indices */ CARD32 possible_clones; /** * Whether this output can support interlaced modes */ Bool interlaceAllowed; /** * Whether this output can support double scan modes */ Bool doubleScanAllowed; /** * List of available modes on this output. * * This should be the list from get_modes(), plus perhaps additional * compatible modes added later. */ DisplayModePtr probed_modes; /** * Options parsed from the related monitor section */ OptionInfoPtr options; /** * Configured monitor section */ XF86ConfMonitorPtr conf_monitor; /** * Desired initial position */ int initial_x, initial_y; /** * Desired initial rotation */ Rotation initial_rotation; /** * Current connection status * * This indicates whether a monitor is known to be connected * to this output or not, or whether there is no way to tell */ xf86OutputStatus status; /** EDID monitor information */ xf86MonPtr MonInfo; /** subpixel order */ int subpixel_order; /** Physical size of the currently attached output device. */ int mm_width, mm_height; /** Output name */ char *name; /** output-specific functions */ const xf86OutputFuncsRec *funcs; /** driver private information */ void *driver_private; /** Whether to use the old per-screen Monitor config section */ Bool use_screen_monitor; #ifdef RANDR_12_INTERFACE /** * RandR 1.2 output structure. * * When RandR 1.2 is available, this points at the associated * RandR output structure and is created when this output is created */ RROutputPtr randr_output; #else void *randr_output; #endif /** Desired initial panning */ BoxRec initialTotalArea; BoxRec initialTrackingArea; INT16 initialBorder[4]; }; typedef struct _xf86CrtcConfigFuncs { /** * Requests that the driver resize the screen. * * The driver is responsible for updating scrn->virtualX and scrn->virtualY. * If the requested size cannot be set, the driver should leave those values * alone and return FALSE. * * A naive driver that cannot reallocate the screen may simply change * virtual[XY]. A more advanced driver will want to also change the * devPrivate.ptr and devKind of the screen pixmap, update any offscreen * pixmaps it may have moved, and change pScrn->displayWidth. */ Bool (*resize)(ScrnInfoPtr scrn, int width, int height); } xf86CrtcConfigFuncsRec, *xf86CrtcConfigFuncsPtr; typedef void (*xf86_crtc_notify_proc_ptr) (ScreenPtr pScreen); typedef struct _xf86CrtcConfig { int num_output; xf86OutputPtr *output; /** * compat_output is used whenever we deal * with legacy code that only understands a single * output. pScrn->modes will be loaded from this output, * adjust frame will whack this output, etc. */ int compat_output; int num_crtc; xf86CrtcPtr *crtc; int minWidth, minHeight; int maxWidth, maxHeight; /* For crtc-based rotation */ DamagePtr rotation_damage; Bool rotation_damage_registered; /* DGA */ unsigned int dga_flags; unsigned long dga_address; DGAModePtr dga_modes; int dga_nmode; int dga_width, dga_height, dga_stride; DisplayModePtr dga_save_mode; const xf86CrtcConfigFuncsRec *funcs; CreateScreenResourcesProcPtr CreateScreenResources; CloseScreenProcPtr CloseScreen; /* Cursor information */ xf86CursorInfoPtr cursor_info; CursorPtr cursor; CARD8 *cursor_image; Bool cursor_on; CARD32 cursor_fg, cursor_bg; /** * Options parsed from the related device section */ OptionInfoPtr options; Bool debug_modes; /* wrap screen BlockHandler for rotation */ ScreenBlockHandlerProcPtr BlockHandler; /* callback when crtc configuration changes */ xf86_crtc_notify_proc_ptr xf86_crtc_notify; } xf86CrtcConfigRec, *xf86CrtcConfigPtr; extern int xf86CrtcConfigPrivateIndex; #define XF86_CRTC_CONFIG_PTR(p) ((xf86CrtcConfigPtr) ((p)->privates[xf86CrtcConfigPrivateIndex].ptr)) /* * Initialize xf86CrtcConfig structure */ void xf86CrtcConfigInit (ScrnInfoPtr scrn, const xf86CrtcConfigFuncsRec *funcs); void xf86CrtcSetSizeRange (ScrnInfoPtr scrn, int minWidth, int minHeight, int maxWidth, int maxHeight); /* * Crtc functions */ xf86CrtcPtr xf86CrtcCreate (ScrnInfoPtr scrn, const xf86CrtcFuncsRec *funcs); void xf86CrtcDestroy (xf86CrtcPtr crtc); /** * Sets the given video mode on the given crtc */ Bool xf86CrtcSetModeTransform (xf86CrtcPtr crtc, DisplayModePtr mode, Rotation rotation, RRTransformPtr transform, int x, int y); Bool xf86CrtcSetMode (xf86CrtcPtr crtc, DisplayModePtr mode, Rotation rotation, int x, int y); void xf86CrtcSetOrigin (xf86CrtcPtr crtc, int x, int y); /* * Assign crtc rotation during mode set */ Bool xf86CrtcRotate (xf86CrtcPtr crtc); /* * Clean up any rotation data, used when a crtc is turned off * as well as when rotation is disabled. */ void xf86RotateDestroy (xf86CrtcPtr crtc); /* * free shadow memory allocated for all crtcs */ void xf86RotateFreeShadow(ScrnInfoPtr pScrn); /* * Clean up rotation during CloseScreen */ void xf86RotateCloseScreen (ScreenPtr pScreen); /** * Return whether any output is assigned to the crtc */ Bool xf86CrtcInUse (xf86CrtcPtr crtc); /* * Output functions */ xf86OutputPtr xf86OutputCreate (ScrnInfoPtr scrn, const xf86OutputFuncsRec *funcs, const char *name); void xf86OutputUseScreenMonitor (xf86OutputPtr output, Bool use_screen_monitor); Bool xf86OutputRename (xf86OutputPtr output, const char *name); void xf86OutputDestroy (xf86OutputPtr output); void xf86ProbeOutputModes (ScrnInfoPtr pScrn, int maxX, int maxY); void xf86SetScrnInfoModes (ScrnInfoPtr pScrn); #ifdef RANDR_13_INTERFACE int #else Bool #endif xf86CrtcScreenInit (ScreenPtr pScreen); Bool xf86InitialConfiguration (ScrnInfoPtr pScrn, Bool canGrow); void xf86DPMSSet(ScrnInfoPtr pScrn, int PowerManagementMode, int flags); Bool xf86SaveScreen(ScreenPtr pScreen, int mode); void xf86DisableUnusedFunctions(ScrnInfoPtr pScrn); DisplayModePtr xf86OutputFindClosestMode (xf86OutputPtr output, DisplayModePtr desired); Bool xf86SetSingleMode (ScrnInfoPtr pScrn, DisplayModePtr desired, Rotation rotation); /** * Set the EDID information for the specified output */ void xf86OutputSetEDID (xf86OutputPtr output, xf86MonPtr edid_mon); /** * Return the list of modes supported by the EDID information * stored in 'output' */ DisplayModePtr xf86OutputGetEDIDModes (xf86OutputPtr output); xf86MonPtr xf86OutputGetEDID (xf86OutputPtr output, I2CBusPtr pDDCBus); /** * Initialize dga for this screen */ Bool xf86DiDGAInit (ScreenPtr pScreen, unsigned long dga_address); /* this is the real function, used only internally */ _X_INTERNAL Bool _xf86_di_dga_init_internal (ScreenPtr pScreen); /** * Re-initialize dga for this screen (as when the set of modes changes) */ Bool xf86DiDGAReInit (ScreenPtr pScreen); /* This is the real function, used only internally */ _X_INTERNAL Bool _xf86_di_dga_reinit_internal (ScreenPtr pScreen); /* * Set the subpixel order reported for the screen using * the information from the outputs */ void xf86CrtcSetScreenSubpixelOrder (ScreenPtr pScreen); /* * Get a standard string name for a connector type */ char * xf86ConnectorGetName(xf86ConnectorType connector); /* * Using the desired mode information in each crtc, set * modes (used in EnterVT functions, or at server startup) */ Bool xf86SetDesiredModes (ScrnInfoPtr pScrn); /** * Initialize the CRTC-based cursor code. CRTC function vectors must * contain relevant cursor setting functions. * * Driver should call this from ScreenInit function */ Bool xf86_cursors_init (ScreenPtr screen, int max_width, int max_height, int flags); /** * Called when anything on the screen is reconfigured. * * Reloads cursor images as needed, then adjusts cursor positions. * * Driver should call this from crtc commit function. */ void xf86_reload_cursors (ScreenPtr screen); /** * Called from EnterVT to turn the cursors back on */ void xf86_show_cursors (ScrnInfoPtr scrn); /** * Called by the driver to turn cursors off */ void xf86_hide_cursors (ScrnInfoPtr scrn); /** * Clean up CRTC-based cursor code. Driver must call this at CloseScreen time. */ void xf86_cursors_fini (ScreenPtr screen); /* * For overlay video, compute the relevant CRTC and * clip video to that. * wraps xf86XVClipVideoHelper() */ Bool xf86_crtc_clip_video_helper(ScrnInfoPtr pScrn, xf86CrtcPtr *crtc_ret, xf86CrtcPtr desired_crtc, BoxPtr dst, INT32 *xa, INT32 *xb, INT32 *ya, INT32 *yb, RegionPtr reg, INT32 width, INT32 height); xf86_crtc_notify_proc_ptr xf86_wrap_crtc_notify (ScreenPtr pScreen, xf86_crtc_notify_proc_ptr new); void xf86_unwrap_crtc_notify(ScreenPtr pScreen, xf86_crtc_notify_proc_ptr old); void xf86_crtc_notify(ScreenPtr pScreen); /** * Panning */ Bool xf86_crtc_get_panning(ScrnInfoPtr pScrn, BoxPtr totalArea, BoxPtr TrackingArea, INT16 *border); Bool xf86_crtc_set_panning(ScrnInfoPtr pScrn, BoxPtr totalArea, BoxPtr TrackingArea, INT16 *border); #endif /* _XF86CRTC_H_ */