# Makefile.in generated by automake 1.9.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = . am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = ${SHELL} $(install_sh) -c -m 644 install_sh_PROGRAM = ${SHELL} $(install_sh) -c install_sh_SCRIPT = ${SHELL} $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(srcdir)/x11-xcb.pc.in \ $(srcdir)/x11.pc.in $(top_srcdir)/configure \ $(top_srcdir)/include/X11/XlibConf.h.in AUTHORS COPYING \ ChangeLog INSTALL NEWS compile config.guess config.sub depcomp \ install-sh ltmain.sh missing subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ax_define_dir.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno configure.status.lineno mkinstalldirs = $(SHELL) $(install_sh) -d CONFIG_HEADER = $(top_builddir)/src/config.h \ $(top_builddir)/include/X11/XlibConf.h CONFIG_CLEAN_FILES = x11.pc x11-xcb.pc SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-exec-recursive install-info-recursive \ install-recursive installcheck-recursive installdirs-recursive \ pdf-recursive ps-recursive uninstall-info-recursive \ uninstall-recursive am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; am__installdirs = "$(DESTDIR)$(pkgconfigdir)" pkgconfigDATA_INSTALL = $(INSTALL_DATA) DATA = $(pkgconfig_DATA) ETAGS = etags CTAGS = ctags DIST_SUBDIRS = include modules src nls man DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ { test ! -d $(distdir) \ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr $(distdir); }; } DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ ADMIN_MAN_DIR = @ADMIN_MAN_DIR@ ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ APP_MAN_DIR = @APP_MAN_DIR@ APP_MAN_SUFFIX = @APP_MAN_SUFFIX@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BASE_CFLAGS = @BASE_CFLAGS@ BIGFONT_CFLAGS = @BIGFONT_CFLAGS@ BIGFONT_LIBS = @BIGFONT_LIBS@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CC_FOR_BUILD = @CC_FOR_BUILD@ CFLAGS = @CFLAGS@ CFLAGS_FOR_BUILD = @CFLAGS_FOR_BUILD@ CHANGELOG_CMD = @CHANGELOG_CMD@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CPPFLAGS_FOR_BUILD = @CPPFLAGS_FOR_BUILD@ CWARNFLAGS = @CWARNFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ DRIVER_MAN_DIR = @DRIVER_MAN_DIR@ DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENABLE_SPECS_FALSE = @ENABLE_SPECS_FALSE@ ENABLE_SPECS_TRUE = @ENABLE_SPECS_TRUE@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ FILE_MAN_DIR = @FILE_MAN_DIR@ FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ FOP = @FOP@ GREP = @GREP@ HAVE_FOP_FALSE = @HAVE_FOP_FALSE@ HAVE_FOP_TRUE = @HAVE_FOP_TRUE@ HAVE_PERL_FALSE = @HAVE_PERL_FALSE@ HAVE_PERL_TRUE = @HAVE_PERL_TRUE@ HAVE_STYLESHEETS_FALSE = @HAVE_STYLESHEETS_FALSE@ HAVE_STYLESHEETS_TRUE = @HAVE_STYLESHEETS_TRUE@ HAVE_XMLTO_FALSE = @HAVE_XMLTO_FALSE@ HAVE_XMLTO_TEXT_FALSE = @HAVE_XMLTO_TEXT_FALSE@ HAVE_XMLTO_TEXT_TRUE = @HAVE_XMLTO_TEXT_TRUE@ HAVE_XMLTO_TRUE = @HAVE_XMLTO_TRUE@ HAVE_XSLTPROC_FALSE = @HAVE_XSLTPROC_FALSE@ HAVE_XSLTPROC_TRUE = @HAVE_XSLTPROC_TRUE@ I18N_MODULE_LIBS = @I18N_MODULE_LIBS@ INSTALL_CMD = @INSTALL_CMD@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ KEYSYMDEFS = @KEYSYMDEFS@ LAUNCHD = @LAUNCHD@ LD = @LD@ LDFLAGS = @LDFLAGS@ LDFLAGS_FOR_BUILD = @LDFLAGS_FOR_BUILD@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIB_MAN_DIR = @LIB_MAN_DIR@ LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@ LINT = @LINT@ LINTLIB = @LINTLIB@ LINT_FALSE = @LINT_FALSE@ LINT_FLAGS = @LINT_FLAGS@ LINT_TRUE = @LINT_TRUE@ LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ MAKEINFO = @MAKEINFO@ MAKE_LINT_LIB_FALSE = @MAKE_LINT_LIB_FALSE@ MAKE_LINT_LIB_TRUE = @MAKE_LINT_LIB_TRUE@ MALLOC_ZERO_CFLAGS = @MALLOC_ZERO_CFLAGS@ MANIFEST_TOOL = @MANIFEST_TOOL@ MAN_SUBSTS = @MAN_SUBSTS@ MISC_MAN_DIR = @MISC_MAN_DIR@ MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@ NM = @NM@ NMEDIT = @NMEDIT@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ OS2_FALSE = @OS2_FALSE@ OS2_TRUE = @OS2_TRUE@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL = @PERL@ PKG_CONFIG = @PKG_CONFIG@ RANLIB = @RANLIB@ RAWCPP = @RAWCPP@ RAWCPPFLAGS = @RAWCPPFLAGS@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRICT_CFLAGS = @STRICT_CFLAGS@ STRIP = @STRIP@ STYLESHEET_SRCDIR = @STYLESHEET_SRCDIR@ THRSTUBS_FALSE = @THRSTUBS_FALSE@ THRSTUBS_TRUE = @THRSTUBS_TRUE@ UDC_FALSE = @UDC_FALSE@ UDC_TRUE = @UDC_TRUE@ VERSION = @VERSION@ WCHAR32 = @WCHAR32@ X11_CFLAGS = @X11_CFLAGS@ X11_DATADIR = @X11_DATADIR@ X11_EXTRA_DEPS = @X11_EXTRA_DEPS@ X11_LIBDIR = @X11_LIBDIR@ X11_LIBS = @X11_LIBS@ X11_LOCALEDATADIR = @X11_LOCALEDATADIR@ X11_LOCALEDIR = @X11_LOCALEDIR@ X11_LOCALELIBDIR = @X11_LOCALELIBDIR@ XCMS_FALSE = @XCMS_FALSE@ XCMS_TRUE = @XCMS_TRUE@ XERRORDB = @XERRORDB@ XKBPROTO_REQUIRES = @XKBPROTO_REQUIRES@ XKB_FALSE = @XKB_FALSE@ XKB_TRUE = @XKB_TRUE@ XKEYSYMDB = @XKEYSYMDB@ XLIB_LOADABLE_I18N_FALSE = @XLIB_LOADABLE_I18N_FALSE@ XLIB_LOADABLE_I18N_TRUE = @XLIB_LOADABLE_I18N_TRUE@ XLOCALEDATADIR = @XLOCALEDATADIR@ XLOCALEDIR = @XLOCALEDIR@ XLOCALELIBDIR = @XLOCALELIBDIR@ XLOCALE_FALSE = @XLOCALE_FALSE@ XLOCALE_TRUE = @XLOCALE_TRUE@ XMALLOC_ZERO_CFLAGS = @XMALLOC_ZERO_CFLAGS@ XMLTO = @XMLTO@ XORG_MAN_PAGE = @XORG_MAN_PAGE@ XORG_SGML_PATH = @XORG_SGML_PATH@ XSLTPROC = @XSLTPROC@ XSL_STYLESHEET = @XSL_STYLESHEET@ XTHREADLIB = @XTHREADLIB@ XTHREAD_CFLAGS = @XTHREAD_CFLAGS@ XTMALLOC_ZERO_CFLAGS = @XTMALLOC_ZERO_CFLAGS@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ locales = @locales@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ @XLIB_LOADABLE_I18N_FALSE@ORDER = modules src @XLIB_LOADABLE_I18N_TRUE@ORDER = src modules SUBDIRS = include $(ORDER) nls man ACLOCAL_AMFLAGS = -I m4 pkgconfigdir = $(libdir)/pkgconfig pkgconfig_DATA = x11.pc x11-xcb.pc MAINTAINERCLEANFILES = ChangeLog INSTALL # Check source code with tools like lint & sparse @LINT_TRUE@LINT_SUBDIRS = src # modules all: all-recursive .SUFFIXES: am--refresh: @: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \ cd $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) include/X11/XlibConf.h: include/X11/stamp-h2 @if test ! -f $@; then \ rm -f include/X11/stamp-h2; \ $(MAKE) include/X11/stamp-h2; \ else :; fi include/X11/stamp-h2: $(top_srcdir)/include/X11/XlibConf.h.in $(top_builddir)/config.status @rm -f include/X11/stamp-h2 cd $(top_builddir) && $(SHELL) ./config.status include/X11/XlibConf.h $(top_srcdir)/include/X11/XlibConf.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_srcdir) && $(AUTOHEADER) rm -f include/X11/stamp-h2 touch $@ distclean-hdr: -rm -f include/X11/XlibConf.h include/X11/stamp-h2 x11.pc: $(top_builddir)/config.status $(srcdir)/x11.pc.in cd $(top_builddir) && $(SHELL) ./config.status $@ x11-xcb.pc: $(top_builddir)/config.status $(srcdir)/x11-xcb.pc.in cd $(top_builddir) && $(SHELL) ./config.status $@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: install-pkgconfigDATA: $(pkgconfig_DATA) @$(NORMAL_INSTALL) test -z "$(pkgconfigdir)" || $(mkdir_p) "$(DESTDIR)$(pkgconfigdir)" @list='$(pkgconfig_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \ done uninstall-pkgconfigDATA: @$(NORMAL_UNINSTALL) @list='$(pkgconfig_DATA)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \ done # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(am__remove_distdir) mkdir $(distdir) $(mkdir_p) $(distdir)/. $(distdir)/include/X11 $(distdir)/m4 @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(mkdir_p) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ distdir) \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-hook -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__remove_distdir) dist dist-all: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && cd $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' distuninstallcheck: @cd $(distuninstallcheck_dir) \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile $(DATA) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(pkgconfigdir)"; do \ test -z "$$dir" || $(mkdir_p) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr \ distclean-libtool distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: install-data-am: install-pkgconfigDATA install-exec-am: install-info: install-info-recursive install-man: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-info-am uninstall-pkgconfigDATA uninstall-info: uninstall-info-recursive .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ check-am clean clean-generic clean-libtool clean-recursive \ ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ dist-hook dist-shar dist-tarZ dist-zip distcheck distclean \ distclean-generic distclean-hdr distclean-libtool \ distclean-recursive distclean-tags distcleancheck distdir \ distuninstallcheck dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-exec \ install-exec-am install-info install-info-am install-man \ install-pkgconfigDATA install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic maintainer-clean-recursive \ mostlyclean mostlyclean-generic mostlyclean-libtool \ mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am uninstall-info-am \ uninstall-pkgconfigDATA .PHONY: ChangeLog INSTALL INSTALL: $(INSTALL_CMD) ChangeLog: $(CHANGELOG_CMD) dist-hook: ChangeLog INSTALL @LINT_TRUE@lint: @LINT_TRUE@ @for subdir in $(LINT_SUBDIRS) ; do \ @LINT_TRUE@ echo "Making $@ in $$subdir"; \ @LINT_TRUE@ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) lint) ; \ @LINT_TRUE@ done # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: