/* * Copyright 2001-2005 by J. Kean Johnston * * Permission to use, copy, modify, distribute, and sell this software and its * documentation for any purpose is hereby granted without fee, provided that * the above copyright notice appear in all copies and that both that * copyright notice and this permission notice appear in supporting * documentation, and that the name J. Kean Johnston not be used in * advertising or publicity pertaining to distribution of the software without * specific, written prior permission. J. Kean Johnston makes no * representations about the suitability of this software for any purpose. * It is provided "as is" without express or implied warranty. * * J. KEAN JOHNSTON DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO * EVENT SHALL J. KEAN JOHNSTON BE LIABLE FOR ANY SPECIAL, INDIRECT OR * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF * USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR * PERFORMANCE OF THIS SOFTWARE. */ /* $XConsortium$ */ /* Re-written May 2001 to represent the current state of reality */ #ifdef HAVE_XORG_CONFIG_H #include #endif #include #include #include "compiler.h" #include "xf86.h" #include "xf86Priv.h" #include "xf86_OSlib.h" static Bool KeepTty = FALSE; static int VTnum = -1; static char vtdevice[48]; static int sco_console_mode = -1; extern Bool mpxLock; void xf86OpenConsole(void) { int i, ioctl_ret; struct vt_mode VT; struct vid_info vidinf; struct sigaction sigvtsw; char *ttn; if (serverGeneration == 1) { /* check if we're run with euid==0 */ if (geteuid() != 0) { FatalError("xf86OpenConsole: Server must be setuid root\n"); } /* If we are run in the background we will get SIGTTOU. Ignore it. */ OsSignal (SIGTTOU, SIG_IGN); /* * Set up the virtual terminal (multiscreen in SCO parlance). * For the actual console itself, screens are numbered from * 1 to (usually) 16. However, it is possible to have a nested * server, and it is also possible to be on a multi-console * system such as MaxSpeed or SunRiver. Therefore, we should * not make any assumptions about the TTY name we are on, and * instead we rely on ttyname() to give us the real TTY name. * Previously, we tried to determine the TTY name manually. * This is wrong. The only time we need to futz with the TTY name * is if we were given the name of a TTY to run on explicity on * the command line. */ if (VTnum == -1) { /* * No device was specified. We need to query the kernel to see which * console device we are on (and in fact if we are on a console at all). */ ttn = ttyname (1); if (ttn == (char *)0) { FatalError ("xf86OpenConsole: Could not determine TTY name: %s\n", strerror(errno)); } strlcpy (vtdevice, ttn, sizeof(vtdevice)); } else if (VTnum >= 0) { snprintf (vtdevice, sizeof(vtdevice), "/dev/tty%02d", VTnum); } /* * Now we can dispose of stdin/stdout */ fclose (stdin); fclose (stdout); if ((xf86Info.consoleFd = open(vtdevice, O_RDWR | O_NDELAY, 0)) < 0) { FatalError("xf86OpenConsole: Cannot open %s: %s\n", vtdevice, strerror(errno)); } /* * We make 100% sure we use the correct VT number. This can get ugly * where there are multi-consoles in use, so we make sure we query * the kernel for the correct VT number. It knows best, we don't. */ vidinf.size = sizeof(vidinf); if (ioctl (xf86Info.consoleFd, CONS_GETINFO, &vidinf) < 0) { FatalError ("xf86OpenConsole: %s not a console device " "or error querying device: %s\n", vtdevice, strerror (errno)); } xf86Info.vtno = vidinf.m_num; VTnum = vidinf.m_num + 1; /* 0-based */ ErrorF("(using VT%02d device %s)\n\n", VTnum, vtdevice); /* We activate the console just in case its not the one we are on */ if (ioctl(xf86Info.consoleFd, VT_ACTIVATE, xf86Info.vtno) != 0) { ErrorF("xf86OpenConsole: VT_ACTIVATE failed (%s)\n", strerror(errno)); } /* Disassociate from controling TTY */ if (!KeepTty) { setpgrp(); } /* * Now we get the current mode that the console device is in. We will * use this later when we close the console device to restore it to * that same mode. */ if ((sco_console_mode = ioctl(xf86Info.consoleFd, CONS_GET, 0L)) < 0) { FatalError("xf86OpenConsole: CONS_GET failed on console (%s)\n", strerror(errno)); } if (ioctl(xf86Info.consoleFd, VT_GETMODE, &VT) < 0) { FatalError("xf86OpenConsole: VT_GETMODE failed (%s)\n", strerror(errno)); } sigvtsw.sa_handler = xf86VTRequest; sigfillset(&sigvtsw.sa_mask); sigvtsw.sa_flags = 0; /* NOTE: Using sigaction means we dont have to re-arm the signal */ sigaction(SIGUSR1, &sigvtsw, NULL); VT.mode = VT_PROCESS; VT.relsig = SIGUSR1; VT.acqsig = SIGUSR1; VT.frsig = SIGINT; /* Not implemented */ VT.waitv = 0; /* * The SCO X server tries the following call 5 times. Lets do the same * thing. It shouldn't really be required but sometimes things take a * while to settle down when switching screens. *helpless shrug* I know * its sucks but ... */ ioctl_ret = 0; for (i = 0; i < 5; i++) { ioctl_ret = ioctl(xf86Info.consoleFd, VT_SETMODE, &VT); if (ioctl_ret >= 0) break; usleep(999999); /* Dont use nap() - it forces linking with -lx */ } if (ioctl_ret < 0) { FatalError("xf86OpenConsole: VT_SETMODE failed (%s)\n", strerror(errno)); } /* * Convince the console driver we are in graphics mode. */ if (ioctl(xf86Info.consoleFd, KDSETMODE, KD_GRAPHICS) < 0) { ErrorF("Failed to set graphics mode (%s)\n", strerror(errno)); } } else { /* serverGeneration != 1 */ if (ioctl(xf86Info.consoleFd, VT_ACTIVATE, xf86Info.vtno) != 0) { ErrorF("xf86OpenConsole: VT_ACTIVATE failed (%s)\n", strerror(errno)); } } } /* * Restore the console to its previous state. This may cause flicker if * the screen was previous in a graphics mode, because we first set it * to text mode. This has the advantage of getting the console driver * to do a soft reset on the card, which really does help settle the * video card down again after coming out of Xfree86. */ void xf86CloseConsole(void) { struct vt_mode VT; struct sigaction sigvtsw; /* Set text mode (possibly briefly) */ ioctl(xf86Info.consoleFd, KDSETMODE, KD_TEXT0); /* Restore the original mode */ if (sco_console_mode != -1) { ioctl(xf86Info.consoleFd, MODESWITCH | sco_console_mode, 0L); } ioctl(xf86Info.consoleFd, VT_RELDISP, 1); /* Release the display */ sigvtsw.sa_handler = SIG_DFL; sigfillset(&sigvtsw.sa_mask); sigvtsw.sa_flags = 0; sigaction(SIGUSR1, &sigvtsw, NULL); VT.mode = VT_AUTO; VT.waitv = 0; VT.relsig = SIGUSR1; VT.acqsig = SIGUSR1; VT.frsig = SIGINT; ioctl(xf86Info.consoleFd, VT_SETMODE, &VT); /* Revert to auto handling */ close(xf86Info.consoleFd); /* We're done with the device */ } int xf86ProcessArgument(int argc, char *argv[], int i) { /* * Keep server from detaching from controlling tty. This is useful * when debugging (so the server can receive keyboard signals). */ if (!strcmp(argv[i], "-keeptty")) { KeepTty = TRUE; return(1); } /* * By default, the X server wants to bind itself to CPU 0. This makes * sure that the server has full access to the I/O ports at IOPL 3. * Some SMP systems have trouble with I/O on CPU's other than 0. If, * however, you have a system that is well behaved, you can specify * this argument and let the scheduler decide which CPU the server * should run on. */ if (!strcmp(argv[i], "-nompxlock")) { mpxLock = FALSE; return (1); } /* * Specify the VT number to run on (NOT the device). */ if ((argv[i][0] == 'v') && (argv[i][1] == 't')) { if (sscanf(argv[i], "vt%2d", &VTnum) == 0) { UseMsg(); VTnum = -1; return(0); } if (VTnum <= 0) { UseMsg(); VTnum = -1; return(0); } return(1); } /* * Use a device the user specifies. */ if (!strcmp(argv[i], "-crt")) { if (++i > argc) { UseMsg(); VTnum = -1; return(0); } else { VTnum = -2; strlcpy (vtdevice, argv[i], sizeof(vtdevice)); return(2); } } return(0); } void xf86UseMsg(void) { ErrorF("vtXX use the specified VT number\n"); ErrorF("-crt DEVICE use the specified VT device\n"); ErrorF("-nompxlock dont bind X server to CPU 0\n"); ErrorF("-keeptty "); ErrorF("don't detach controlling tty (for debugging only)\n"); }