/* Copyright 1993, 1994, 1998 The Open Group Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation. The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of The Open Group shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization from The Open Group. * Copyright 1993, 1994 NCR Corporation - Dayton, Ohio, USA * * All Rights Reserved * * Permission to use, copy, modify, and distribute this software and its * documentation for any purpose and without fee is hereby granted, provided * that the above copyright notice appear in all copies and that both that * copyright notice and this permission notice appear in supporting * documentation, and that the name NCR not be used in advertising * or publicity pertaining to distribution of the software without specific, * written prior permission. NCR makes no representations about the * suitability of this software for any purpose. It is provided "as is" * without express or implied warranty. * * NCR DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN * NO EVENT SHALL NCR BE LIABLE FOR ANY SPECIAL, INDIRECT OR * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS * OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, * NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #include #ifdef HAVE_LAUNCHD #include #endif /* * The transport table contains a definition for every transport (protocol) * family. All operations that can be made on the transport go through this * table. * * Each transport is assigned a unique transport id. * * New transports can be added by adding an entry in this table. * For compatiblity, the transport ids should never be renumbered. * Always add to the end of the list. */ #define TRANS_TLI_INET_INDEX 1 #define TRANS_TLI_TCP_INDEX 2 #define TRANS_TLI_TLI_INDEX 3 #define TRANS_SOCKET_UNIX_INDEX 4 #define TRANS_SOCKET_LOCAL_INDEX 5 #define TRANS_SOCKET_INET_INDEX 6 #define TRANS_SOCKET_TCP_INDEX 7 #define TRANS_DNET_INDEX 8 #define TRANS_LOCAL_LOCAL_INDEX 9 #define TRANS_LOCAL_PTS_INDEX 10 #define TRANS_LOCAL_NAMED_INDEX 11 #define TRANS_LOCAL_ISC_INDEX 12 #define TRANS_LOCAL_SCO_INDEX 13 #define TRANS_SOCKET_INET6_INDEX 14 #define TRANS_LOCAL_PIPE_INDEX 15 static Xtransport_table Xtransports[] = { #if defined(STREAMSCONN) { &TRANS(TLITCPFuncs), TRANS_TLI_TCP_INDEX }, { &TRANS(TLIINETFuncs), TRANS_TLI_INET_INDEX }, { &TRANS(TLITLIFuncs), TRANS_TLI_TLI_INDEX }, #endif /* STREAMSCONN */ #if defined(TCPCONN) { &TRANS(SocketTCPFuncs), TRANS_SOCKET_TCP_INDEX }, #if defined(IPv6) && defined(AF_INET6) { &TRANS(SocketINET6Funcs), TRANS_SOCKET_INET6_INDEX }, #endif /* IPv6 */ { &TRANS(SocketINETFuncs), TRANS_SOCKET_INET_INDEX }, #endif /* TCPCONN */ #if defined(DNETCONN) { &TRANS(DNETFuncs), TRANS_DNET_INDEX }, #endif /* DNETCONN */ #if defined(UNIXCONN) #if !defined(LOCALCONN) { &TRANS(SocketLocalFuncs), TRANS_SOCKET_LOCAL_INDEX }, #endif /* !LOCALCONN */ { &TRANS(SocketUNIXFuncs), TRANS_SOCKET_UNIX_INDEX }, #endif /* UNIXCONN */ #if defined(OS2PIPECONN) { &TRANS(OS2LocalFuncs), TRANS_LOCAL_LOCAL_INDEX }, #endif /* OS2PIPECONN */ #if defined(LOCALCONN) { &TRANS(LocalFuncs), TRANS_LOCAL_LOCAL_INDEX }, #ifndef sun { &TRANS(PTSFuncs), TRANS_LOCAL_PTS_INDEX }, #endif /* sun */ #ifdef SVR4 { &TRANS(NAMEDFuncs), TRANS_LOCAL_NAMED_INDEX }, #endif #ifdef sun { &TRANS(PIPEFuncs), TRANS_LOCAL_PIPE_INDEX }, #else /* !sun */ #if !defined(__SCO__) && !defined(__UNIXWARE__) { &TRANS(ISCFuncs), TRANS_LOCAL_ISC_INDEX }, #endif { &TRANS(SCOFuncs), TRANS_LOCAL_SCO_INDEX }, #endif /* sun */ #endif /* LOCALCONN */ }; #define NUMTRANS (sizeof(Xtransports)/sizeof(Xtransport_table)) #ifdef WIN32 #define ioctl ioctlsocket #endif /* * These are a few utility function used by the public interface functions. */ void TRANS(FreeConnInfo) (XtransConnInfo ciptr) { PRMSG (3,"FreeConnInfo(%p)\n", ciptr, 0, 0); if (ciptr->addr) xfree (ciptr->addr); if (ciptr->peeraddr) xfree (ciptr->peeraddr); if (ciptr->port) xfree (ciptr->port); xfree ((char *) ciptr); } #define PROTOBUFSIZE 20 static Xtransport * TRANS(SelectTransport) (char *protocol) { char protobuf[PROTOBUFSIZE]; int i; PRMSG (3,"SelectTransport(%s)\n", protocol, 0, 0); /* * Force Protocol to be lowercase as a way of doing * a case insensitive match. */ strncpy (protobuf, protocol, PROTOBUFSIZE - 1); protobuf[PROTOBUFSIZE-1] = '\0'; for (i = 0; i < PROTOBUFSIZE && protobuf[i] != '\0'; i++) if (isupper (protobuf[i])) protobuf[i] = tolower (protobuf[i]); /* Look at all of the configured protocols */ for (i = 0; i < NUMTRANS; i++) { if (!strcmp (protobuf, Xtransports[i].transport->TransName)) return Xtransports[i].transport; } return NULL; } #ifndef TEST_t static #endif /* TEST_t */ int TRANS(ParseAddress) (char *address, char **protocol, char **host, char **port) { /* * For the font library, the address is a string formatted * as "protocol/host:port[/catalogue]". Note that the catologue * is optional. At this time, the catologue info is ignored, but * we have to parse it anyways. * * Other than fontlib, the address is a string formatted * as "protocol/host:port". * * If the protocol part is missing, then assume TCP. * If the protocol part and host part are missing, then assume local. * If a "::" is found then assume DNET. */ char *mybuf, *tmpptr; char *_protocol, *_host, *_port; char hostnamebuf[256]; int _host_len; size_t len; PRMSG (3,"ParseAddress(%s)\n", address, 0, 0); /* Copy the string so it can be changed */ len = strlen (address) + 1; tmpptr = mybuf = (char *) xalloc (len); strlcpy (mybuf, address, len); /* Parse the string to get each component */ /* Get the protocol part */ _protocol = mybuf; if ( ((mybuf = strchr (mybuf,'/')) == NULL) && ((mybuf = strrchr (tmpptr,':')) == NULL) ) { /* address is in a bad format */ *protocol = NULL; *host = NULL; *port = NULL; xfree (tmpptr); return 0; } if (*mybuf == ':') { /* * If there is a hostname, then assume tcp, otherwise * it must be local. */ if (mybuf == tmpptr) { /* There is neither a protocol or host specified */ _protocol = "local"; } else { /* There is a hostname specified */ _protocol = "tcp"; mybuf = tmpptr; /* reset to the begining of the host ptr */ } } else { /* *mybuf == '/' */ *mybuf ++= '\0'; /* put a null at the end of the protocol */ if (strlen(_protocol) == 0) { /* * If there is a hostname, then assume tcp, otherwise * it must be local. */ if (*mybuf != ':') _protocol = "tcp"; else _protocol = "local"; } } /* Get the host part */ _host = mybuf; if ((mybuf = strrchr (mybuf,':')) == NULL) { *protocol = NULL; *host = NULL; *port = NULL; xfree (tmpptr); return 0; } /* Check for DECnet */ if ((mybuf != _host) && (*(mybuf - 1) == ':') #if defined(IPv6) && defined(AF_INET6) /* An IPv6 address can end in :: so three : in a row is assumed to be an IPv6 host and not a DECnet node with a : in it's name, unless DECnet is specifically requested */ && ( ((mybuf - 1) == _host) || (*(mybuf - 2) != ':') || ((_protocol != NULL) && (strcmp(_protocol, "dnet") == 0)) ) #endif ) { _protocol = "dnet"; *(mybuf - 1) = '\0'; } *mybuf ++= '\0'; _host_len = strlen(_host); if (_host_len == 0) { TRANS(GetHostname) (hostnamebuf, sizeof (hostnamebuf)); _host = hostnamebuf; } #if defined(IPv6) && defined(AF_INET6) /* hostname in IPv6 [numeric_addr]:0 form? */ else if ( (_host_len > 3) && ((strcmp(_protocol, "tcp") == 0) || (strcmp(_protocol, "inet6") == 0)) && (*_host == '[') && (*(_host + _host_len - 1) == ']') ) { struct sockaddr_in6 sin6; *(_host + _host_len - 1) = '\0'; /* Verify address is valid IPv6 numeric form */ if (inet_pton(AF_INET6, _host + 1, &sin6) == 1) { /* It is. Use it as such. */ _host++; _protocol = "inet6"; } else { /* It's not, restore it just in case some other code can use it. */ *(_host + _host_len - 1) = ']'; } } #endif /* Get the port */ _port = mybuf; #if defined(FONT_t) || defined(FS_t) /* * Is there an optional catalogue list? */ if ((mybuf = strchr (mybuf,'/')) != NULL) *mybuf ++= '\0'; /* * The rest, if any, is the (currently unused) catalogue list. * * _catalogue = mybuf; */ #endif #ifdef HAVE_LAUNCHD /* launchd sockets will look like 'local//tmp/launch-XgkNns/:0' */ if(address != NULL && strlen(address)>8 && (!strncmp(address,"local//",7))) { _protocol="local"; _host=""; _port=address+6; } #endif /* * Now that we have all of the components, allocate new * string space for them. */ len = strlen (_protocol) + 1; if ((*protocol = (char *) xalloc(len)) == NULL) { /* Malloc failed */ *port = NULL; *host = NULL; *protocol = NULL; xfree (tmpptr); return 0; } else strlcpy (*protocol, _protocol, len); len = strlen (_host) + 1; if ((*host = (char *) xalloc (len)) == NULL) { /* Malloc failed */ *port = NULL; *host = NULL; xfree (*protocol); *protocol = NULL; xfree (tmpptr); return 0; } else strlcpy (*host, _host, len); len = strlen (_port) + 1; if ((*port = (char *) xalloc (len)) == NULL) { /* Malloc failed */ *port = NULL; xfree (*host); *host = NULL; xfree (*protocol); *protocol = NULL; xfree (tmpptr); return 0; } else strlcpy (*port, _port, len); xfree (tmpptr); return 1; } /* * TRANS(Open) does all of the real work opening a connection. The only * funny part about this is the type parameter which is used to decide which * type of open to perform. */ static XtransConnInfo TRANS(Open) (int type, char *address) { char *protocol = NULL, *host = NULL, *port = NULL; XtransConnInfo ciptr = NULL; Xtransport *thistrans; PRMSG (2,"Open(%d,%s)\n", type, address, 0); #if defined(WIN32) && (defined(TCPCONN) || defined(DNETCONN)) if (TRANS(WSAStartup)()) { PRMSG (1,"Open: WSAStartup failed\n", 0, 0, 0); return NULL; } #endif /* Parse the Address */ if (TRANS(ParseAddress) (address, &protocol, &host, &port) == 0) { PRMSG (1,"Open: Unable to Parse address %s\n", address, 0, 0); return NULL; } /* Determine the transport type */ if ((thistrans = TRANS(SelectTransport) (protocol)) == NULL) { PRMSG (1,"Open: Unable to find transport for %s\n", protocol, 0, 0); xfree (protocol); xfree (host); xfree (port); return NULL; } /* Open the transport */ switch (type) { case XTRANS_OPEN_COTS_CLIENT: #ifdef TRANS_CLIENT ciptr = thistrans->OpenCOTSClient(thistrans, protocol, host, port); #endif /* TRANS_CLIENT */ break; case XTRANS_OPEN_COTS_SERVER: #ifdef TRANS_SERVER ciptr = thistrans->OpenCOTSServer(thistrans, protocol, host, port); #endif /* TRANS_SERVER */ break; case XTRANS_OPEN_CLTS_CLIENT: #ifdef TRANS_CLIENT ciptr = thistrans->OpenCLTSClient(thistrans, protocol, host, port); #endif /* TRANS_CLIENT */ break; case XTRANS_OPEN_CLTS_SERVER: #ifdef TRANS_SERVER ciptr = thistrans->OpenCLTSServer(thistrans, protocol, host, port); #endif /* TRANS_SERVER */ break; default: PRMSG (1,"Open: Unknown Open type %d\n", type, 0, 0); } if (ciptr == NULL) { if (!(thistrans->flags & TRANS_DISABLED)) { PRMSG (1,"Open: transport open failed for %s/%s:%s\n", protocol, host, port); } xfree (protocol); xfree (host); xfree (port); return NULL; } ciptr->transptr = thistrans; ciptr->port = port; /* We need this for TRANS(Reopen) */ xfree (protocol); xfree (host); return ciptr; } #ifdef TRANS_REOPEN /* * We might want to create an XtransConnInfo object based on a previously * opened connection. For example, the font server may clone itself and * pass file descriptors to the parent. */ static XtransConnInfo TRANS(Reopen) (int type, int trans_id, int fd, char *port) { XtransConnInfo ciptr = NULL; Xtransport *thistrans = NULL; char *save_port; int i; size_t len; PRMSG (2,"Reopen(%d,%d,%s)\n", trans_id, fd, port); /* Determine the transport type */ for (i = 0; i < NUMTRANS; i++) if (Xtransports[i].transport_id == trans_id) { thistrans = Xtransports[i].transport; break; } if (thistrans == NULL) { PRMSG (1,"Reopen: Unable to find transport id %d\n", trans_id, 0, 0); return NULL; } len = strlen (port) + 1; if ((save_port = (char *) xalloc (len)) == NULL) { PRMSG (1,"Reopen: Unable to malloc port string\n", 0, 0, 0); return NULL; } strlcpy (save_port, port, len); /* Get a new XtransConnInfo object */ switch (type) { case XTRANS_OPEN_COTS_SERVER: ciptr = thistrans->ReopenCOTSServer(thistrans, fd, port); break; case XTRANS_OPEN_CLTS_SERVER: ciptr = thistrans->ReopenCLTSServer(thistrans, fd, port); break; default: PRMSG (1,"Reopen: Bad Open type %d\n", type, 0, 0); } if (ciptr == NULL) { PRMSG (1,"Reopen: transport open failed\n", 0, 0, 0); return NULL; } ciptr->transptr = thistrans; ciptr->port = save_port; return ciptr; } #endif /* TRANS_REOPEN */ /* * These are the public interfaces to this Transport interface. * These are the only functions that should have knowledge of the transport * table. */ #ifdef TRANS_CLIENT XtransConnInfo TRANS(OpenCOTSClient) (char *address) { PRMSG (2,"OpenCOTSClient(%s)\n", address, 0, 0); return TRANS(Open) (XTRANS_OPEN_COTS_CLIENT, address); } #endif /* TRANS_CLIENT */ #ifdef TRANS_SERVER XtransConnInfo TRANS(OpenCOTSServer) (char *address) { PRMSG (2,"OpenCOTSServer(%s)\n", address, 0, 0); return TRANS(Open) (XTRANS_OPEN_COTS_SERVER, address); } #endif /* TRANS_SERVER */ #ifdef TRANS_CLIENT XtransConnInfo TRANS(OpenCLTSClient) (char *address) { PRMSG (2,"OpenCLTSClient(%s)\n", address, 0, 0); return TRANS(Open) (XTRANS_OPEN_CLTS_CLIENT, address); } #endif /* TRANS_CLIENT */ #ifdef TRANS_SERVER XtransConnInfo TRANS(OpenCLTSServer) (char *address) { PRMSG (2,"OpenCLTSServer(%s)\n", address, 0, 0); return TRANS(Open) (XTRANS_OPEN_CLTS_SERVER, address); } #endif /* TRANS_SERVER */ #ifdef TRANS_REOPEN XtransConnInfo TRANS(ReopenCOTSServer) (int trans_id, int fd, char *port) { PRMSG (2,"ReopenCOTSServer(%d, %d, %s)\n", trans_id, fd, port); return TRANS(Reopen) (XTRANS_OPEN_COTS_SERVER, trans_id, fd, port); } XtransConnInfo TRANS(ReopenCLTSServer) (int trans_id, int fd, char *port) { PRMSG (2,"ReopenCLTSServer(%d, %d, %s)\n", trans_id, fd, port); return TRANS(Reopen) (XTRANS_OPEN_CLTS_SERVER, trans_id, fd, port); } int TRANS(GetReopenInfo) (XtransConnInfo ciptr, int *trans_id, int *fd, char **port) { int i; size_t len; for (i = 0; i < NUMTRANS; i++) if (Xtransports[i].transport == ciptr->transptr) { *trans_id = Xtransports[i].transport_id; *fd = ciptr->fd; len = strlen (ciptr->port) + 1; if ((*port = (char *) xalloc (len)) == NULL) return 0; else { strlcpy (*port, ciptr->port, len); return 1; } } return 0; } #endif /* TRANS_REOPEN */ int TRANS(SetOption) (XtransConnInfo ciptr, int option, int arg) { int fd = ciptr->fd; int ret = 0; PRMSG (2,"SetOption(%d,%d,%d)\n", fd, option, arg); /* * For now, all transport type use the same stuff for setting options. * As long as this is true, we can put the common code here. Once a more * complicated transport such as shared memory or an OSI implementation * that uses the session and application libraries is implemented, this * code may have to move to a transport dependent function. * * ret = ciptr->transptr->SetOption (ciptr, option, arg); */ switch (option) { case TRANS_NONBLOCKING: switch (arg) { case 0: /* Set to blocking mode */ break; case 1: /* Set to non-blocking mode */ #if defined(O_NONBLOCK) && (!defined(ultrix) && !defined(hpux) && !defined(AIXV3) && !defined(uniosu) && !defined(__UNIXOS2__) && !defined(SCO325)) && !defined(__QNX__) ret = fcntl (fd, F_GETFL, 0); if (ret != -1) ret = fcntl (fd, F_SETFL, ret | O_NONBLOCK); #else #ifdef FIOSNBIO { int arg; arg = 1; ret = ioctl (fd, FIOSNBIO, &arg); } #else #if (defined(AIXV3) || defined(uniosu) || defined(WIN32) || defined(__UNIXOS2__) || defined(__QNX__)) && defined(FIONBIO) { #ifdef WIN32 u_long arg; #else int arg; #endif arg = 1; /* IBM TCP/IP understands this option too well: it causes TRANS(Read) to fail * eventually with EWOULDBLOCK */ #ifndef __UNIXOS2__ ret = ioctl (fd, FIONBIO, &arg); #else /* ret = ioctl(fd, FIONBIO, &arg, sizeof(int));*/ #endif } #else ret = fcntl (fd, F_GETFL, 0); #ifdef FNDELAY ret = fcntl (fd, F_SETFL, ret | FNDELAY); #else ret = fcntl (fd, F_SETFL, ret | O_NDELAY); #endif #endif /* AIXV3 || uniosu */ #endif /* FIOSNBIO */ #endif /* O_NONBLOCK */ break; default: /* Unknown option */ break; } break; case TRANS_CLOSEONEXEC: #ifdef F_SETFD #ifdef FD_CLOEXEC ret = fcntl (fd, F_SETFD, FD_CLOEXEC); #else ret = fcntl (fd, F_SETFD, 1); #endif /* FD_CLOEXEC */ #endif /* F_SETFD */ break; } return ret; } #ifdef TRANS_SERVER int TRANS(CreateListener) (XtransConnInfo ciptr, char *port, unsigned int flags) { return ciptr->transptr->CreateListener (ciptr, port, flags); } int TRANS(NoListen) (char * protocol) { Xtransport *trans; int i = 0, ret = 0; if ((trans = TRANS(SelectTransport)(protocol)) == NULL) { PRMSG (1,"TransNoListen: unable to find transport: %s\n", protocol, 0, 0); return -1; } if (trans->flags & TRANS_ALIAS) { if (trans->nolisten) while (trans->nolisten[i]) { ret |= TRANS(NoListen)(trans->nolisten[i]); i++; } } trans->flags |= TRANS_NOLISTEN; return ret; } int TRANS(ResetListener) (XtransConnInfo ciptr) { if (ciptr->transptr->ResetListener) return ciptr->transptr->ResetListener (ciptr); else return TRANS_RESET_NOOP; } XtransConnInfo TRANS(Accept) (XtransConnInfo ciptr, int *status) { XtransConnInfo newciptr; PRMSG (2,"Accept(%d)\n", ciptr->fd, 0, 0); newciptr = ciptr->transptr->Accept (ciptr, status); if (newciptr) newciptr->transptr = ciptr->transptr; return newciptr; } #endif /* TRANS_SERVER */ #ifdef TRANS_CLIENT int TRANS(Connect) (XtransConnInfo ciptr, char *address) { char *protocol; char *host; char *port; int ret; PRMSG (2,"Connect(%d,%s)\n", ciptr->fd, address, 0); if (TRANS(ParseAddress) (address, &protocol, &host, &port) == 0) { PRMSG (1,"Connect: Unable to Parse address %s\n", address, 0, 0); return -1; } #ifdef HAVE_LAUNCHD if (!host || !*host) host=strdup(""); #endif if (!port || !*port) { PRMSG (1,"Connect: Missing port specification in %s\n", address, 0, 0); if (protocol) xfree (protocol); if (host) xfree (host); return -1; } ret = ciptr->transptr->Connect (ciptr, host, port); if (protocol) xfree (protocol); if (host) xfree (host); if (port) xfree (port); return ret; } #endif /* TRANS_CLIENT */ int TRANS(BytesReadable) (XtransConnInfo ciptr, BytesReadable_t *pend) { return ciptr->transptr->BytesReadable (ciptr, pend); } int TRANS(Read) (XtransConnInfo ciptr, char *buf, int size) { return ciptr->transptr->Read (ciptr, buf, size); } int TRANS(Write) (XtransConnInfo ciptr, char *buf, int size) { return ciptr->transptr->Write (ciptr, buf, size); } int TRANS(Readv) (XtransConnInfo ciptr, struct iovec *buf, int size) { return ciptr->transptr->Readv (ciptr, buf, size); } int TRANS(Writev) (XtransConnInfo ciptr, struct iovec *buf, int size) { return ciptr->transptr->Writev (ciptr, buf, size); } int TRANS(Disconnect) (XtransConnInfo ciptr) { return ciptr->transptr->Disconnect (ciptr); } int TRANS(Close) (XtransConnInfo ciptr) { int ret; PRMSG (2,"Close(%d)\n", ciptr->fd, 0, 0); ret = ciptr->transptr->Close (ciptr); TRANS(FreeConnInfo) (ciptr); return ret; } int TRANS(CloseForCloning) (XtransConnInfo ciptr) { int ret; PRMSG (2,"CloseForCloning(%d)\n", ciptr->fd, 0, 0); ret = ciptr->transptr->CloseForCloning (ciptr); TRANS(FreeConnInfo) (ciptr); return ret; } int TRANS(IsLocal) (XtransConnInfo ciptr) { return (ciptr->family == AF_UNIX); } int TRANS(GetMyAddr) (XtransConnInfo ciptr, int *familyp, int *addrlenp, Xtransaddr **addrp) { PRMSG (2,"GetMyAddr(%d)\n", ciptr->fd, 0, 0); *familyp = ciptr->family; *addrlenp = ciptr->addrlen; if ((*addrp = (Xtransaddr *) xalloc (ciptr->addrlen)) == NULL) { PRMSG (1,"GetMyAddr: malloc failed\n", 0, 0, 0); return -1; } memcpy(*addrp, ciptr->addr, ciptr->addrlen); return 0; } int TRANS(GetPeerAddr) (XtransConnInfo ciptr, int *familyp, int *addrlenp, Xtransaddr **addrp) { PRMSG (2,"GetPeerAddr(%d)\n", ciptr->fd, 0, 0); *familyp = ciptr->family; *addrlenp = ciptr->peeraddrlen; if ((*addrp = (Xtransaddr *) xalloc (ciptr->peeraddrlen)) == NULL) { PRMSG (1,"GetPeerAddr: malloc failed\n", 0, 0, 0); return -1; } memcpy(*addrp, ciptr->peeraddr, ciptr->peeraddrlen); return 0; } int TRANS(GetConnectionNumber) (XtransConnInfo ciptr) { return ciptr->fd; } /* * These functions are really utility functions, but they require knowledge * of the internal data structures, so they have to be part of the Transport * Independant API. */ #ifdef TRANS_SERVER static int complete_network_count (void) { int count = 0; int found_local = 0; int i; /* * For a complete network, we only need one LOCALCONN transport to work */ for (i = 0; i < NUMTRANS; i++) { if (Xtransports[i].transport->flags & TRANS_ALIAS || Xtransports[i].transport->flags & TRANS_NOLISTEN) continue; if (Xtransports[i].transport->flags & TRANS_LOCAL) found_local = 1; else count++; } return (count + found_local); } int TRANS(MakeAllCOTSServerListeners) (char *port, int *partial, int *count_ret, XtransConnInfo **ciptrs_ret) { char buffer[256]; /* ??? What size ?? */ XtransConnInfo ciptr, temp_ciptrs[NUMTRANS]; int status, i, j; #ifdef HAVE_LAUNCHD int launchd_fd; launch_data_t sockets_dict, checkin_request, checkin_response; launch_data_t listening_fd_array, listening_fd; #endif #if defined(IPv6) && defined(AF_INET6) int ipv6_succ = 0; #endif PRMSG (2,"MakeAllCOTSServerListeners(%s,%p)\n", port ? port : "NULL", ciptrs_ret, 0); *count_ret = 0; #ifdef HAVE_LAUNCHD /* Get launchd fd */ if ((checkin_request = launch_data_new_string(LAUNCH_KEY_CHECKIN)) == NULL) { fprintf(stderr,"launch_data_new_string(\"" LAUNCH_KEY_CHECKIN "\") Unable to create string.\n"); goto not_launchd; } if ((checkin_response = launch_msg(checkin_request)) == NULL) { fprintf(stderr,"launch_msg(\"" LAUNCH_KEY_CHECKIN "\") IPC failure: %s\n",strerror(errno)); goto not_launchd; } if (LAUNCH_DATA_ERRNO == launch_data_get_type(checkin_response)) { // ignore EACCES, which is common if we weren't started by launchd if (launch_data_get_errno(checkin_response) != EACCES) fprintf(stderr,"launchd check-in failed: %s\n",strerror(launch_data_get_errno(checkin_response))); goto not_launchd; } sockets_dict = launch_data_dict_lookup(checkin_response, LAUNCH_JOBKEY_SOCKETS); if (NULL == sockets_dict) { fprintf(stderr,"launchd check-in: no sockets found to answer requests on!\n"); goto not_launchd; } if (launch_data_dict_get_count(sockets_dict) > 1) { fprintf(stderr,"launchd check-in: some sockets will be ignored!\n"); goto not_launchd; } listening_fd_array = launch_data_dict_lookup(sockets_dict, ":0"); if (NULL == listening_fd_array) { fprintf(stderr,"launchd check-in: No known sockets found to answer requests on!\n"); goto not_launchd; } if (launch_data_array_get_count(listening_fd_array)!=1) { fprintf(stderr,"launchd check-in: Expected 1 socket from launchd, got %d)\n", launch_data_array_get_count(listening_fd_array)); goto not_launchd; } listening_fd=launch_data_array_get_index(listening_fd_array, 0); launchd_fd=launch_data_get_fd(listening_fd); fprintf(stderr,"Xquartz: run by launchd for fd %d\n",launchd_fd); if((ciptr = TRANS(ReopenCOTSServer(TRANS_SOCKET_LOCAL_INDEX, launchd_fd, getenv("DISPLAY"))))==NULL) fprintf(stderr,"Got NULL while trying to Reopen launchd port\n"); else temp_ciptrs[(*count_ret)++] = ciptr; not_launchd: #endif for (i = 0; i < NUMTRANS; i++) { Xtransport *trans = Xtransports[i].transport; unsigned int flags = 0; if (trans->flags&TRANS_ALIAS || trans->flags&TRANS_NOLISTEN) continue; snprintf(buffer, sizeof(buffer), "%s/:%s", trans->TransName, port ? port : ""); PRMSG (5,"MakeAllCOTSServerListeners: opening %s\n", buffer, 0, 0); if ((ciptr = TRANS(OpenCOTSServer(buffer))) == NULL) { if (trans->flags & TRANS_DISABLED) continue; PRMSG (1, "MakeAllCOTSServerListeners: failed to open listener for %s\n", trans->TransName, 0, 0); continue; } #if defined(IPv6) && defined(AF_INET6) if ((Xtransports[i].transport_id == TRANS_SOCKET_INET_INDEX && ipv6_succ)) flags |= ADDR_IN_USE_ALLOWED; #endif if ((status = TRANS(CreateListener (ciptr, port, flags))) < 0) { if (status == TRANS_ADDR_IN_USE) { /* * We failed to bind to the specified address because the * address is in use. It must be that a server is already * running at this address, and this function should fail. */ PRMSG (1, "MakeAllCOTSServerListeners: server already running\n", 0, 0, 0); for (j = 0; j < *count_ret; j++) TRANS(Close) (temp_ciptrs[j]); *count_ret = 0; *ciptrs_ret = NULL; *partial = 0; return -1; } else { PRMSG (1, "MakeAllCOTSServerListeners: failed to create listener for %s\n", trans->TransName, 0, 0); continue; } } #if defined(IPv6) && defined(AF_INET6) if (Xtransports[i].transport_id == TRANS_SOCKET_INET6_INDEX) ipv6_succ = 1; #endif PRMSG (5, "MakeAllCOTSServerListeners: opened listener for %s, %d\n", trans->TransName, ciptr->fd, 0); temp_ciptrs[*count_ret] = ciptr; (*count_ret)++; } *partial = (*count_ret < complete_network_count()); PRMSG (5, "MakeAllCOTSServerListeners: partial=%d, actual=%d, complete=%d \n", *partial, *count_ret, complete_network_count()); if (*count_ret > 0) { if ((*ciptrs_ret = (XtransConnInfo *) xalloc ( *count_ret * sizeof (XtransConnInfo))) == NULL) { return -1; } for (i = 0; i < *count_ret; i++) { (*ciptrs_ret)[i] = temp_ciptrs[i]; } } else *ciptrs_ret = NULL; return 0; } int TRANS(MakeAllCLTSServerListeners) (char *port, int *partial, int *count_ret, XtransConnInfo **ciptrs_ret) { char buffer[256]; /* ??? What size ?? */ XtransConnInfo ciptr, temp_ciptrs[NUMTRANS]; int status, i, j; PRMSG (2,"MakeAllCLTSServerListeners(%s,%p)\n", port ? port : "NULL", ciptrs_ret, 0); *count_ret = 0; for (i = 0; i < NUMTRANS; i++) { Xtransport *trans = Xtransports[i].transport; if (trans->flags&TRANS_ALIAS || trans->flags&TRANS_NOLISTEN) continue; snprintf(buffer, sizeof(buffer), "%s/:%s", trans->TransName, port ? port : ""); PRMSG (5,"MakeAllCLTSServerListeners: opening %s\n", buffer, 0, 0); if ((ciptr = TRANS(OpenCLTSServer (buffer))) == NULL) { PRMSG (1, "MakeAllCLTSServerListeners: failed to open listener for %s\n", trans->TransName, 0, 0); continue; } if ((status = TRANS(CreateListener (ciptr, port, 0))) < 0) { if (status == TRANS_ADDR_IN_USE) { /* * We failed to bind to the specified address because the * address is in use. It must be that a server is already * running at this address, and this function should fail. */ PRMSG (1, "MakeAllCLTSServerListeners: server already running\n", 0, 0, 0); for (j = 0; j < *count_ret; j++) TRANS(Close) (temp_ciptrs[j]); *count_ret = 0; *ciptrs_ret = NULL; *partial = 0; return -1; } else { PRMSG (1, "MakeAllCLTSServerListeners: failed to create listener for %s\n", trans->TransName, 0, 0); continue; } } PRMSG (5, "MakeAllCLTSServerListeners: opened listener for %s, %d\n", trans->TransName, ciptr->fd, 0); temp_ciptrs[*count_ret] = ciptr; (*count_ret)++; } *partial = (*count_ret < complete_network_count()); PRMSG (5, "MakeAllCLTSServerListeners: partial=%d, actual=%d, complete=%d \n", *partial, *count_ret, complete_network_count()); if (*count_ret > 0) { if ((*ciptrs_ret = (XtransConnInfo *) xalloc ( *count_ret * sizeof (XtransConnInfo))) == NULL) { return -1; } for (i = 0; i < *count_ret; i++) { (*ciptrs_ret)[i] = temp_ciptrs[i]; } } else *ciptrs_ret = NULL; return 0; } #endif /* TRANS_SERVER */ /* * These routines are not part of the X Transport Interface, but they * may be used by it. */ #ifdef CRAY /* * Cray UniCOS does not have readv and writev so we emulate */ static int TRANS(ReadV) (XtransConnInfo ciptr, struct iovec *iov, int iovcnt) { struct msghdr hdr; hdr.msg_iov = iov; hdr.msg_iovlen = iovcnt; hdr.msg_accrights = 0; hdr.msg_accrightslen = 0; hdr.msg_name = 0; hdr.msg_namelen = 0; return (recvmsg (ciptr->fd, &hdr, 0)); } static int TRANS(WriteV) (XtransConnInfo ciptr, struct iovec *iov, int iovcnt) { struct msghdr hdr; hdr.msg_iov = iov; hdr.msg_iovlen = iovcnt; hdr.msg_accrights = 0; hdr.msg_accrightslen = 0; hdr.msg_name = 0; hdr.msg_namelen = 0; return (sendmsg (ciptr->fd, &hdr, 0)); } #endif /* CRAY */ #if (defined(SYSV) && defined(__i386__) && !defined(__SCO__) && !defined(sun)) || defined(WIN32) || defined(__sxg__) || defined(__UNIXOS2__) /* * emulate readv */ static int TRANS(ReadV) (XtransConnInfo ciptr, struct iovec *iov, int iovcnt) { int i, len, total; char *base; ESET(0); for (i = 0, total = 0; i < iovcnt; i++, iov++) { len = iov->iov_len; base = iov->iov_base; while (len > 0) { register int nbytes; nbytes = TRANS(Read) (ciptr, base, len); if (nbytes < 0 && total == 0) return -1; if (nbytes <= 0) return total; ESET(0); len -= nbytes; total += nbytes; base += nbytes; } } return total; } #endif /* SYSV && __i386__ || WIN32 || __sxg__ */ #if (defined(SYSV) && defined(__i386__) && !defined(__SCO__) && !defined(sun)) || defined(WIN32) || defined(__sxg__) || defined(__UNIXOS2__) /* * emulate writev */ static int TRANS(WriteV) (XtransConnInfo ciptr, struct iovec *iov, int iovcnt) { int i, len, total; char *base; ESET(0); for (i = 0, total = 0; i < iovcnt; i++, iov++) { len = iov->iov_len; base = iov->iov_base; while (len > 0) { register int nbytes; nbytes = TRANS(Write) (ciptr, base, len); if (nbytes < 0 && total == 0) return -1; if (nbytes <= 0) return total; ESET(0); len -= nbytes; total += nbytes; base += nbytes; } } return total; } #endif /* SYSV && __i386__ || WIN32 || __sxg__ */ #if (defined(_POSIX_SOURCE) && !defined(AIXV3) && !defined(__QNX__)) || defined(hpux) || defined(USG) || defined(SVR4) || defined(__SCO__) #ifndef NEED_UTSNAME #define NEED_UTSNAME #endif #include #endif /* * TRANS(GetHostname) - similar to gethostname but allows special processing. */ int TRANS(GetHostname) (char *buf, int maxlen) { int len; #ifdef NEED_UTSNAME struct utsname name; uname (&name); len = strlen (name.nodename); if (len >= maxlen) len = maxlen - 1; strncpy (buf, name.nodename, len); buf[len] = '\0'; #else buf[0] = '\0'; (void) gethostname (buf, maxlen); buf [maxlen - 1] = '\0'; len = strlen(buf); #endif /* NEED_UTSNAME */ return len; }