# $XTermId: terminfo,v 1.184 2019/11/04 21:55:11 tom Exp $ # # Updates/notes/new entries (e.g., xterm-8bit, xterm-16color, xterm-256color) # - Thomas E. Dickey # #------------------------------------------------------------------------------ # Copyright 1996-2017,2019 by Thomas E. Dickey # # All Rights Reserved # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the # "Software"), to deal in the Software without restriction, including # without limitation the rights to use, copy, modify, merge, publish, # distribute, sublicense, and/or sell copies of the Software, and to # permit persons to whom the Software is furnished to do so, subject to # the following conditions: # # The above copyright notice and this permission notice shall be included # in all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS # OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF # MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. # IN NO EVENT SHALL THE ABOVE LISTED COPYRIGHT HOLDER(S) BE LIABLE FOR ANY # CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, # TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE # SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # # Except as contained in this notice, the name(s) of the above copyright # holders shall not be used in advertising or otherwise to promote the # sale, use or other dealings in this Software without prior written # authorization. #------------------------------------------------------------------------------ # format (ncurses 6.1): tic -I -W -1 -f -x terminfo #------------------------------------------------------------------------------ # # Special Capabilities: # -------------------- # ich has a corresponding capability that inserts a single blank. We could # have used ich1=\E[@, which works with ncurses, but that is not standard # behavior. If it is set, then SVr4 vi (e.g., Solaris 2.6) emits both # smir/rmir and ich1. # meml locks memory above the cursor; memu unlocks (ala HP terminals). This # is not recognized by some older (e.g., SVr3) tic programs, but none # do more than warn about it. Ignore the warning. # smcup clears memory before switching to the alternate screen. The older # (deprecated) \E[?47h did not do this, requiring applications to # embed a \E[2J in the rmcup string. However, that behavior cannot # be disabled via titeInhibit, making that resource not function as # intended on systems with terminfo. # rs2/is2 are shorter with XFree86 xterm because it supports DECSTR. We # use the shorter sequence for compatibility with the termcap, which # is trimmed to keep it shorter than 1023 characters. It (escape \E[!p) # replaces these in the conventional vt100 reset-string: # \E7 - save cursor (fixes origin-mode side-effect) # \E[r - reset scrolling margins # \E[m - reset SGR (including color) # \E[?7h - reset wraparound mode (DECAWM) # \E[?1l - reset application cursor keys (DECCKM) # \E[?6l - reset origin mode (DECOM) # \E8 - restore cursor # DECSTR is recognized by XFree86 xterm even in vt52 mode. # # Editing Keypad: # -------------- # XFree86 xterm emulates vt220 if the decTerminalID resource is set to 200 or # higher. Otherwise it emulates a vt100 or vt52 depending on the value of the # resource. When emulating a vt220, we support the editing keypad. Sun and PC # keyboards have an editing keypad which is similar to the vt220: # # VT220 editing keypad # ---------------------------- # Find Insert Remove # Select Prev Next # ---------------------------- # # Sun/PC editing keypad # ---------------------------- # Insert Home PageUp # Delete End PageDn # ---------------------------- # # If the sunKeyboard resource is true, we map it this way (adjusting the values # of Home, End and Delete): # VT220 Sun/PC # ---------------------------- # Find Home # Select End # Insert Insert # Remove Delete # Prev PageUp # Next PageDn # ---------------------------- # # Note that all of the keys on the editing keypad transmit escape sequences. A # vt220 does this only when in vt220 mode; when emulating a vt100 the editing # keypad is inactive. # # Alternative keycodes: # -------------------- # Several of the function keys have alternative names, depending on the type of # host which your xterm is connected to. DEC (i.e., the VMS system) uses F15 # as the HELP key, F16 as the DO key. Unix applications generally do not do # this. Curses applications in particular, assign a unique keycode to each # capability string. These terminal descriptions do not have conflicting # definitions, to ensure that Unix curses applications use a consistent set of # keycodes. To get a VMS-bias, make these substitutions: # 1. change khome to kfnd # 2. change kend to kslt # The original xterm-r6 entry does in fact have a VMS bias. # # Some legacy applications using the termcap emulation may expect kll where # we have specified kend. # # Function keys with modifiers (Sun/PC): # ------------------------------------- # Shift-Fx - kf{12+x} # Control-Fx - kf{24+x} # Shift-Control-Fx - kf{36+x} # # The terminfo defines some special keys which are documented as "shifted", # e.g., kDC is shifted-delete-character. # # Note however, that even though the terminfo says a key might be sent, there # may be conflicts which prevent this. For example, it is common to use # shifted pageup and pagedown for window manager functions. The default # translation for xterm since X11R4 has overridden shifted Insert, Select, # PageUp and PageDown, which correspond to terminfo kIC, kEND, kPRV and kNXT # respectively. # xterm-new|modern xterm terminal emulator, npc, indn=\E[%p1%dS, kcbt=\E[Z, kent=\EOM, rin=\E[%p1%dT, use=xterm+keypad, use=vt420+lrmm, use=xterm+sm+1006, use=ansi+rep, use=ecma+strikeout, use=xterm+pcfkeys, use=xterm+tmux, use=xterm-basic, # Left/right margins are supported in xterm since patch #279 (2012/05/10) vt420+lrmm|VT420 left/right margins, mgc=\E[?69l, smglr=\E[?69h\E[%i%p1%d;%p2%ds, # These "ansi+XXX" blocks were added in ncurses 5.0: ansi+rep, rep=%p1%c\E[%p2%{1}%-%db, ansi+enq|ncurses extension for ANSI ENQ, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c, u9=\E[c, # Encode modifiers using parameters (see "Xterm Control Sequences" ctlseqs.ms). # Note that this is unrelated to PCTERM. # # Some names are extensions allowed by ncurses, e.g., # kDN, kDN5, kDN6, kLFT5, kLFT6, kRIT5, kRIT6, kUP, kUP5, kUP6 # # The uppercase names are made up, since there are no standards that apply. # If they were limited to two characters, they could in principle be translated # to termcap. However, termcap sizes are limited to 1023 bytes, so there is # little point in ensuring that extended key names can be translated to # termcap. A terminfo file can be up to 4096 bytes; using all extended keys # that xterm can generate would in fact exceed that limit. # # The numbers correspond to the modifier parameters documented in Xterm # Control Sequences: # # 2 Shift # 3 Alt # 4 Shift + Alt # 5 Control # 6 Shift + Control # 7 Alt + Control # 8 Shift + Alt + Control # # X/Open Curses defines some shift combinations, which are also used here # where applicable. Since it does define some shift combinations, no number # (2) is used for suffixing the made-up names. Some combinations are not # useful, e.g., they may reboot your computer, or they may require too many # fingers. I stopped at modifier 7, just to keep things simple -TD # # XTerm resources: # --------------- # The xterm+pcfn, xterm+pcf0, xterm+pcf1, xterm+pcf2 and xterm+pcf3 fragments # correspond to default resource settings for xterm on a 104-key PC keyboard # with 12 function-keys: # # *sunKeyboard:false # *oldXtermFKeys:false # *modifyCursorKeys:2 # *modifyFunctionKeys:2 # *ctrlFKeys:10 # # The key numbers are computed based on the modifiers: # # kf1-kf12 are F1-F12 # kf13-kf24 are shift F1-F12 # kf25-kf36 are control F1-F12 # kf37-kf48 are control+shift F1-F12 # kf49-kf60 are alt F1-F12 # kf61-kf63 are shift-alt F1-F3 # # Note that ncurses would allow definition of kf64 and beyond, if there were # an application that required it. # xterm+pcfkeys|fragment for PC-style keys, use=xterm+app, use=xterm+pcf2, use=xterm+pce2, use=xterm+pcc2, # This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who # asked for some of xterm's advanced features to be added to its terminfo # entry. It defines extended capabilities not found in standard terminfo or # termcap. These are useful in tmux, for instance, hence the name. # # One caveat in adding extended capabilities in ncurses is that if the names # are longer than two characters, then they will not be visible through the # termcap interface. # # Ms modifies the selection/clipboard. Its parameters are # p1 = the storage unit (clipboard, selection or cut buffer) # p2 = the base64-encoded clipboard content. # # Ss is used to set the cursor style as described by the DECSCUSR # function to a block or underline. # Se resets the cursor style to the terminal power-on default. # # Cs and Ce set and reset the cursor colour. xterm+tmux|advanced xterm features used in tmux, Cr=\E]112\007, Cs=\E]12;%p1%s\007, Ms=\E]52;%p1%s;%p2%s \007, Se=\E[2\sq, Ss=\E[%p1%d\sq, # # The ctrlFKeys resource is only relevant to the xterm+pcfn and xterm+pcfN # entries, since the modifyFunctionKeys resource overrides ctrlFKeys when it is # positive. A different choice of ctrlFKeys would give a different set of # function-key strings. xterm+pcfn|fragment with modifyFunctionKeys:-1 and ctrlFKeys:10, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf21=\E[42~, kf22=\E[43~, kf23=\E[44~, kf24=\E[45~, kf25=\E[46~, kf26=\E[47~, kf27=\E[48~, kf28=\E[49~, kf29=\E[50~, kf3=\EOR, kf30=\E[51~, kf31=\E[52~, kf32=\E[53~, kf33=\E[54~, kf34=\E[55~, kf35=\E[56~, kf36=\E[57~, kf37=\E[58~, kf38=\E[59~, kf39=\E[60~, kf4=\EOS, kf40=\E[61~, kf41=\E[62~, kf42=\E[63~, kf43=\E[64~, kf44=\E[65~, kf45=\E[66~, kf46=\E[67~, kf47=\E[68~, kf48=\E[69~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, # Changing ctrlFKeys to 12 would let us number the keys using just shift- and # control- modifiers: # kf1-kf12 are F1-F12 # kf13-kf24 are shift F1-F12 # kf25-kf36 are control F1-F12 # kf37-kf48 are control+shift F1-F12 xterm+pcfN|fragment with modifyFunctionKeys:-1 and ctrlFKeys:12, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf21=\E[42~, kf22=\E[43~, kf23=\E[44~, kf24=\E[45~, kf25=\E[46~, kf26=\E[47~, kf27=\E[48~, kf28=\E[49~, kf29=\E[50~, kf3=\EOR, kf30=\E[51~, kf31=\E[52~, kf32=\E[53~, kf33=\E[54~, kf34=\E[55~, kf35=\E[56~, kf36=\E[57~, kf37=\E[58~, kf38=\E[59~, kf39=\E[60~, kf4=\EOS, kf40=\E[61~, kf41=\E[62~, kf42=\E[63~, kf43=\E[64~, kf44=\E[65~, kf45=\E[66~, kf46=\E[67~, kf47=\E[68~, kf48=\E[69~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, xterm+pcf0|fragment with modifyFunctionKeys:0, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S, kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q, kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R, kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P, kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S, kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P, kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, # This is almost the same as xterm+pcf2 because the unmodified keys all happen # to have a pattern that forces the modifier to the same position. xterm+pcf1|fragment with modifyFunctionKeys:1, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[2P, kf14=\E[2Q, kf15=\E[2R, kf16=\E[2S, kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[5P, kf26=\E[5Q, kf27=\E[5R, kf28=\E[5S, kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\E[6P, kf38=\E[6Q, kf39=\E[6R, kf4=\EOS, kf40=\E[6S, kf41=\E[15;6~, kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\E[3P, kf5=\E[15~, kf50=\E[3Q, kf51=\E[3R, kf52=\E[3S, kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\E[4P, kf62=\E[4Q, kf63=\E[4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, xterm+pcf2|fragment with modifyFunctionKeys:2, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S, kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q, kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R, kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R, kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, xterm+pcf3|fragment with modifyFunctionKeys:3, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[>1;2P, kf14=\E[>1;2Q, kf15=\E[>1;2R, kf16=\E[>1;2S, kf17=\E[>15;2~, kf18=\E[>17;2~, kf19=\E[>18;2~, kf2=\EOQ, kf20=\E[>19;2~, kf21=\E[>20;2~, kf22=\E[>21;2~, kf23=\E[>23;2~, kf24=\E[>24;2~, kf25=\E[>1;5P, kf26=\E[>1;5Q, kf27=\E[>1;5R, kf28=\E[>1;5S, kf29=\E[>15;5~, kf3=\EOR, kf30=\E[>17;5~, kf31=\E[>18;5~, kf32=\E[>19;5~, kf33=\E[>20;5~, kf34=\E[>21;5~, kf35=\E[>23;5~, kf36=\E[>24;5~, kf37=\E[>1;6P, kf38=\E[>1;6Q, kf39=\E[>1;6R, kf4=\EOS, kf40=\E[>1;6S, kf41=\E[>15;6~, kf42=\E[>17;6~, kf43=\E[>18;6~, kf44=\E[>19;6~, kf45=\E[>20;6~, kf46=\E[>21;6~, kf47=\E[>23;6~, kf48=\E[>24;6~, kf49=\E[>1;3P, kf5=\E[15~, kf50=\E[>1;3Q, kf51=\E[>1;3R, kf52=\E[>1;3S, kf53=\E[>15;3~, kf54=\E[>17;3~, kf55=\E[>18;3~, kf56=\E[>19;3~, kf57=\E[>20;3~, kf58=\E[>21;3~, kf59=\E[>23;3~, kf6=\E[17~, kf60=\E[>24;3~, kf61=\E[>1;4P, kf62=\E[>1;4Q, kf63=\E[>1;4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, # # The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27) # and revised in patch #167 (2002/8/24). # # The original assignments from patch #94 for cursor-keys had some technical # issues: # # A parameter for a function-key to represent a modifier is just more # bits. But for a cursor-key it may change the behavior of the # application. For instance, emacs decodes the first parameter of a # cursor-key as a repeat count. # # A parameterized string should (really) not begin with SS3 (\EO). # Rather, CSI (\E[) should be used. # # For these reasons, the original assignments were deprecated. For # compatibility reasons, they are still available as a setting of xterm's # modifyCursorKeys resource. These fragments list the modified cursor-keys # that might apply to xterm+pcfkeys with different values of that resource. xterm+pcc3|fragment with modifyCursorKeys:3, kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B, kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B, kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B, kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D, kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C, kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C, kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A, kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A, kUP7=\E[>1;7A, xterm+pcc2|fragment with modifyCursorKeys:2, kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A, kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B, kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D, kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D, kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C, kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A, kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A, xterm+pcc1|fragment with modifyCursorKeys:1, kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B, kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B, kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D, kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C, kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A, kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A, xterm+pcc0|fragment with modifyCursorKeys:0, kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B, kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B, kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D, kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C, kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A, kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A, # The home/end keys on the editing keypad are also treated as cursor keys. xterm+pce3|fragment with modifyCursorKeys:3, kDC=\E[>3;2~, kEND=\E[>1;2F, kHOM=\E[>1;2H, kIC=\E[>2;2~, kNXT=\E[>6;2~, kPRV=\E[>5;2~, kDC3=\E[>3;3~, kDC4=\E[>3;4~, kDC5=\E[>3;5~, kDC6=\E[>3;6~, kDC7=\E[>3;7~, kEND3=\E[>1;3F, kEND4=\E[>1;4F, kEND5=\E[>1;5F, kEND6=\E[>1;6F, kEND7=\E[>1;7F, kHOM3=\E[>1;3H, kHOM4=\E[>1;4H, kHOM5=\E[>1;5H, kHOM6=\E[>1;6H, kHOM7=\E[>1;7H, kIC3=\E[>2;3~, kIC4=\E[>2;4~, kIC5=\E[>2;5~, kIC6=\E[>2;6~, kIC7=\E[>2;7~, kNXT3=\E[>6;3~, kNXT4=\E[>6;4~, kNXT5=\E[>6;5~, kNXT6=\E[>6;6~, kNXT7=\E[>6;7~, kPRV3=\E[>5;3~, kPRV4=\E[>5;4~, kPRV5=\E[>5;5~, kPRV6=\E[>5;6~, kPRV7=\E[>5;7~, use=xterm+pce0, xterm+pce2|fragment with modifyCursorKeys:2, kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~, kNXT=\E[6;2~, kPRV=\E[5;2~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~, kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F, kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F, kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H, kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~, kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~, kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~, kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~, kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~, use=xterm+pce0, xterm+pce1|fragment with modifyCursorKeys:1, kDC=\E[3;2~, kEND=\E[2F, kHOM=\E[2H, kIC=\E[2;2~, kNXT=\E[6;2~, kPRV=\E[5;2~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~, kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[3F, kEND4=\E[4F, kEND5=\E[5F, kEND6=\E[6F, kEND7=\E[7F, kHOM3=\E[3H, kHOM4=\E[4H, kHOM5=\E[5H, kHOM6=\E[6H, kHOM7=\E[7H, kIC3=\E[2;3~, kIC4=\E[2;4~, kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~, kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~, kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~, kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~, use=xterm+pce0, xterm+pce0|fragment with modifyCursorKeys:0, kDC=\E[3;2~, kEND=\EO2F, kHOM=\EO2H, kIC=\E[2;2~, kNXT=\E[6;2~, kPRV=\E[5;2~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~, kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\EO3F, kEND4=\EO4F, kEND5=\EO5F, kEND6=\EO6F, kEND7=\EO7F, kHOM3=\EO3H, kHOM4=\EO4H, kHOM5=\EO5H, kHOM6=\EO6H, kHOM7=\EO7H, kIC3=\E[2;3~, kIC4=\E[2;4~, kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~, kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~, kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~, kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~, use=xterm+edit, # The rmxx/smxx capabilities are an ncurses extension ecma+strikeout|ECMA-48 strikeout/crossed-out, rmxx=\E[29m, smxx=\E[9m, # The XM capability is an ncurses extension xterm+sm+1006|xterm SGR-mouse, kmous=\E[<, XM=\E[?1006;1000 %? %p1%{1}%= %th %e l %;, xm=\E[< %p1%d;%p2%d;%p3%d; %? %p4 %tM %e m %;, # By default, ncurses knows that xterm private mode 1000 enables/disables # the X11 xterm mouse protocol. So XM is not needed here, except for clarity. xterm+x11mouse|X11 xterm mouse protocol, kmous=\E[M, XM=\E[?1000 %? %p1%{1}%= %th %e l %;, xm=\E[M %? %p4 %t3 %e %p3%'\s'%+%c %; %p2%'!'%+%c%p1%'!'%+%c, # This chunk is used for building the VT220/Sun/PC keyboard variants. xterm-basic|modern xterm terminal emulator - common, OTbs, am, bce, km, mc5i, mir, msgr, xenl, AX, XT, colors#8, cols#80, it#8, lines#24, pairs#64, acsc=``aaffggiijjkkllmmnnooppqqr rssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>, kmous=\E[M, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, meml=\El, memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, ritm=\E[23m, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, setb=\E[4 %? %p1%{1}%= %t4 %e %p1%{3}%= %t6 %e %p1%{4}%= %t1 %e %p1%{6}%= %t3 %e %p1%d %; m, setf=\E[3 %? %p1%{1}%= %t4 %e %p1%{3}%= %t6 %e %p1%{4}%= %t1 %e %p1%{6}%= %t3 %e %p1%d %; m, sgr= %? %p9 %t\E(0 %e \E(B %; \E[0 %? %p6 %t;1 %; %? %p5 %t;2 %; %? %p2 %t;4 %; %? %p1%p3%| %t;7 %; %? %p4 %t;5 %; %? %p7 %t;8 %; m, sgr0=\E(B\E[m, sitm=\E[3m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3J, use=ansi+enq, use=xterm+alt+title, use=xterm+kbs, # # The xterm-new description has all of the features, but is not completely # compatible with vt220. If you are using a Sun or PC keyboard, set the # sunKeyboard resource to true: # + maps the editing keypad # + interprets control-function-key as a second array of keys, so a # 12-fkey keyboard can support vt220's 20-fkeys. # + maps numeric keypad "+" to ",". # + uses DEC-style control sequences for the application keypad. # # Some packagers modify xterm's resource definitions to provide extra function # keys by using the shift-modifier in the translations resource. However, that # interferes with the DECUDK functionality. # xterm-vt220|xterm emulating vt220, ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kend=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, ka2=\EOx, kb1=\EOt, kb3=\EOv, kc2=\EOr, use=xterm+app, use=xterm+edit, use=xterm-basic, # xterm-vt52|xterm emulating dec vt52, cols#80, it#8, lines#24, acsc=``aaffggjjkkllmmnnooppqqrrs sttuuvvwwxxyyzz{{||}}~~, bel=^G, clear=\EH\EJ, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC, cup=\EY%p1%'\s'%+%c%p2%'\s'%+%c, cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ht=^I, ind=\n, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, nel=\r\n, ri=\EI, rmacs=\EG, smacs=\EF, use=xterm+kbs, # # Sun does not number the function keys this way in their sparse termcap; their # terminal descriptions ignore the keypads. kb(7M) states that there are codes # reserved for 64 function keys, 16 each in left, right, top and bottom. Each # keyboard type has a different number of function keys in different # arrangements. Using xkeycaps for reference: # # Type 3: left 10, top 9, right 15 # ------ # kf1-kf9 are XK_F1-XK_F9 # There is no kf10 on this keyboard type. # kf11-kf20 are keysyms XK_L1 through XK_L10. # kf31-kf45 are keysyms XK_R1 through XK_R15. # # However, X's keysymdef.h is hard-coded to make # XK_L1==XK_F11 and # XK_R1==XK_F21, # by someone who was unfamiliar with terminal types other than Sun's. So # xterm uses the internal X keysymbols, but the terminfo entry uses the Sun # numbering scheme. # # Type 4: left 11, top 12, right 15 # ------ # The left-keypad contains an unnumbered Help-key. # The right-keypad also contains NumLock, Ins, Del, Enter, + and - keys which # do not appear to be part of the R-sequence. # # Type 5: left 9, top 12, right (more than one keypad) # ------ # These keyboards do not use the same naming convention, look like a hybrid of # the type 4 and IBM keyboards. # # XTerm resources: # --------------- # Set the modifyFunctionKeys resource to negative (-1) to make it simple to # enter the higher function-key values using shift- and control-modifiers. # xterm-sun|xterm with sun function keys, kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z, kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z, kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z, kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z, kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z, kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z, kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z, kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z, kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z, kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z, use=xterm-basic, # xterm-hp|xterm with hpterm function keys, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ, knp=\ES, kpp=\ET, use=xterm-basic, # # scoterm implements 48 function-keys using shift- and control-modifiers to # multiple 12 function-keys. X has a hard-coded limit of 35 function-keys, # but xterm can represent larger values. # # XTerm resources: # --------------- # Set the modifyFunctionKeys resource to negative (-1) to make it simple to # enter the higher function-key values using shift- and control-modifiers. # # Also, set ctrlFKeys resource to 12 (the default is 10) to make xterm see 48 # function-keys on a keyboard with 12 function-keys and 4 control/shift # modifier combinations. # xterm-sco|xterm with SCO function keys, kbeg=\E[E, kdch1=^?, kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I, use=xterm+noapp, use=xterm-basic, # # Other variants (these are all very old entries, from X11R5): xterm-24|xterms|vs100|xterm terminal emulator (X Window System), lines#24, use=xterm-old, xterm-65|xterm with tall window 65x80 (X Window System), lines#65, use=xterm-old, xterm-bold|xterm with bold instead of underline (X Window System), sgr= %? %p9 %t\016 %e \017 %; B\E[0 %? %p6 %t;1 %; %? %p2 %t;1 %; %? %p1%p3%| %t;7 %; m, smso=\E[7m, smul=\E[1m, use=xterm-old, xterm-boldso|xterm with bold for standout (X Window System), rmso=\E[m, smso=\E[1m, use=xterm-old, xterm-mono|monochrome xterm, bce@, colors@, ncv@, pairs@, op@, setab@, setaf@, setb@, setf@, sgr@, use=xterm-old, # # VTxxx terminals are usually set up so that full-screen applications will use # the cursor application mode strings. This is good for full-screen # applications, including legacy applications which may have hard-coded # behavior, but bad for interactive shells (e.g., tcsh, bash) which use arrow # keys to scroll through a history of command strings. # # To see the difference between normal/application modes, consider this example: # + In normal (non-application) mode, the terminal transmits a down-arrow # as \E[C, which happens to echo as a down-arrow. # + In application mode the terminal transmits \EOC, which echoes as C. # That is because the \EO is the SS3 control, which says to use the # character from the G3 character set for the next cell. # # One example of hard-coded behavior would be for applications written to work # with VT52 and VT100 terminals. If the application's parser ignores 'O' and # '?' characters after the escape, then the cursor and keypad strings for the # two terminals are the same. (Indeed, one of the first curses applications # which I used did something like this to cover "ANSI" terminals -TD). # # To make this work (leaving the cursor keys in normal mode), we have to adjust # the terminal initialization sequences: # # smkx/rmkx set/reset the cursor and keypad application modes. We retain # the latter (otherwise many applications fail). # # smcup/rmcup set/restore cursor-addressing mode for full-screen # applications. For xterm, this normally means the alternate # screen, which is not compatible with interactive shells. Some # programs are "smart" and disable these. # xterm-noapp|xterm with cursor keys in normal mode, rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp, use=xterm, xterm+noapp|fragment with cursor keys in normal mode, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, use=xterm+noapp+pc, xterm+app|fragment with cursor keys in application mode, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, use=xterm+app+pc, xterm+noapp+pc|fragment for noapp pc-style home/end, kend=\E[F, khome=\E[H, xterm+app+pc|fragment for app pc-style home/end, kend=\EOF, khome=\EOH, xterm+edit|fragment for 6-key editing-keypad, kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, use=xterm+pc+edit, xterm+decedit|fragment for vt220 6-key editing-keypad, kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, use=xterm+vt+edit, xterm+pc+edit|fragment for pc-style editing keypad, kend=\E[4~, khome=\E[1~, xterm+vt+edit|fragment for vt220-style editing keypad, kfnd=\E[1~, kslt=\E[4~, xterm+noalt|xterm without altscreen, rmcup@, smcup@, xterm+alt1049|xterm 90 feature, rmcup=\E[?1049l, smcup=\E[?1049h, xterm+titlestack|xterm 251 feature, rmcup=\E[23;0;0t, smcup=\E[22;0;0t, xterm+alt+title|xterm 90 and 251 features combined, rmcup=\E[?1049l\E[23;0;0t, smcup=\E[?1049h\E[22;0;0t, # from development after ncurses 6.1 xterm+keypad|xterm emulating VT100/VT220 numeric keypad, kp5=\EOE, kpADD=\EOk, kpCMA=\EOl, kpDIV=\EOo, kpDOT=\EOn, kpMUL=\EOj, kpSUB=\EOm, kpZRO=\EOp, use=vt220+keypad, # from develoment after ncurses 5.2 vt220+keypad|dec vt220 numeric keypad, ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt, kb3=\EOv, kc2=\EOr, # # This should work for the commonly used "color xterm" variations (XFree86 # xterm, color_xterm, nxterm, rxvt). Note that it does not set 'bce', so for # XFree86 and and rxvt, some applications that use colors will be less # efficient, and in a few special cases (with "smart" optimization) the wrong # color will be painted in spots. xterm-color|generic "ANSI" color xterm (X Window System), colors#8, ncv@, pairs#64, op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=xterm-r6, # # vi may work better with this entry, because vi # doesn't use insert mode much xterm-ic|xterm-vi|xterm with insert character instead of insert mode, mir@, ich=\E[%p1%d@, ich1=\E[@, rmir@, smir@, use=xterm, # # This is used only for testing (it's not relevant to DEC VTxxx terminals, but # to ncurses). xterm-xmc|xterm with magic-cookie glitch, xmc#1, use=xterm-new, # # This one was originally for testing ncurses. While the ISO 6429 defines the # REP control, none of the DEC VTxxx terminals (VT52 through VT525) support it. # # The feature's inclusion in xterm was prompted by changes in ncurses to # support testing repeat_char by Alexander Lukyanov, since no readily-available # terminal supported this: # # + Alexander's patch was integrated in ncurses 1996/09/28 # + xterm patch #32 1996/11/21 was released in XFree86 3.2A 1997/01/26 # # In July 2017, the feature was added to xterm-new in ncurses, making this # entry obsolete (but it is kept for reference). xterm-rep|xterm with repeat-character control, rep=%p1%c\E[%p2%{1}%-%db, use=xterm-new, # # This is mainly for testing xterm; the real VT220 will not let you switch # character sets without first altering the keyboard language in the setup # screen. Some emulators allow this anyway. (Note that these strings are # normally used only for printers). The parameter to csnm and scs is the same # in both cases: the keyboard language parameter returned by CSI ? 2 6 n. xterm-nrc|xterm with VT220 national replacement character sets, csnm= %? %p1%{1}%= %tNorth\sAmerican %e %p1%{2}%= %tBritish %e %p1%{3}%= %tFlemish %e %p1%{4}%= %tFrench\sCanadian %e %p1%{5}%= %tDanish %e %p1%{6}%= %tFinnish %e %p1%{7}%= %tGerman %e %p1%{8}%= %tDutch %e %p1%{9}%= %tItalian %e %p1%{10}%= %tSwiss\s(French) %e %p1%{11}%= %tSwiss\s(German) %e %p1%{12}%= %tSwedish %e %p1%{13}%= %tNorwegian %e %p1%{14}%= %tFrench/Belgian %e %p1%{15}%= %tSpanish %;, scs= %? %p1%{1}%= %t\E(B %e %p1%{2}%= %t\E(A %e %p1%{3}%= %t\E(R %e %p1%{4}%= %t\E(9 %e %p1%{5}%= %t\E(E %e %p1%{6}%= %t\E(5 %e %p1%{7}%= %t\E(K %e %p1%{8}%= %t\E(4 %e %p1%{9}%= %t\E(Y %e %p1%{10}%= %t\E(= %e %p1%{11}%= %t\E(= %e %p1%{12}%= %t\E(7 %e %p1%{13}%= %t\E(E %e %p1%{14}%= %t\E(R %e %p1%{15}%= %t\E(Z %;, use=xterm-new, # # Foreground 0-15 maps (with toggles) into 30-37 & 90-97 # Background 0-15 maps (with toggles) into 40-47 & 100-107 # # Originally I suppressed setaf/setab, since ANSI specifies only 8 colors, but # Stephen Marley persuaded me to allow the "ANSI" color controls to extend to # 16 colors. (Note that ncurses 4.2 uses setf/setb from this description; # however 5.0 selects either according to their availability). - T.Dickey # # SVr4 curses does not use more than 8 colors anyway, so using 16 colors is # either for terminfo-level applications or via ncurses. xterm-16color|xterm with 16 colors, colors#16, pairs#0x100, setab=\E[ %? %p1%{8}%< %t%p1%{40}%+ %e %p1%{92}%+ %; %dm, setaf=\E[ %? %p1%{8}%< %t%p1%{30}%+ %e %p1%{82}%+ %; %dm, setb= %p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa %?%ga%{1}%= %t4 %e%ga%{3}%= %t6 %e%ga%{4}%= %t1 %e%ga%{6}%= %t3 %e%ga%d %; m, setf= %p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa %?%ga%{1}%= %t4 %e%ga%{3}%= %t6 %e%ga%{4}%= %t1 %e%ga%{6}%= %t3 %e%ga%d %; m, use=xterm+256color, use=xterm+osc104, use=xterm-new, # xterm OSC 104 resets the color palette. Using it as part of xterm+256color # has the drawback that some of the xterm-alikes which use that building block # require a different approach to rs1 -TD xterm+osc104|reset color palette, oc=\E]104\007, rs1=\Ec\E]104\007, # "indexed color" is mentioned without definition in ISO 8613-6 (ITU T.416). # # This implementation uses a 256-element color map where the first 16 entries # are shared with the aixterm-compatible colors (and in turn the first 8 are # shared with the ANSI colors). The three levels (256, 16, 8) account for the # use of a conditional expression in setaf/setab which reduces the number of # characters sent to the screen for typical applications. # # 256 colors should give 65536 pairs, but SVr4 (legacy) terminfo stores numbers # in a signed short. Most people will not notice problems with only 32767 # pairs. With ncurses 6.1, numbers are stored in a signed integer (at least # 32-bits), and the inconsistency regarding pairs is eliminated. xterm+256color|xterm 256-color feature, ccc, colors#0x100, pairs#0x10000, initc=\E]4; %p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\, oc=\E]104\007, setab=\E[ %? %p1%{8}%< %t4%p1%d %e %p1%{16}%< %t10%p1%{8}%-%d %e48;5; %p1%d %; m, setaf=\E[ %? %p1%{8}%< %t3%p1%d %e %p1%{16}%< %t9%p1%{8}%-%d %e38;5; %p1%d %; m, setb@, setf@, xterm-256color|xterm with 256 colors, use=xterm+256color, use=xterm+osc104, use=xterm-new, xterm-88color|xterm with 88 colors, colors#88, pairs#7744, use=xterm-256color, # "direct color" is mentioned without definition in ISO 8613-6 (ITU T.416). # # This is a particular implementation which assume 8-bit values for red, green, # and blue. Other encodings are possible; none are addressed by that standard. # # The "RGB" flag is an ncurses 6.1 extension which tells the library how to # quickly compute the color-content for a given color value. # # Like xterm+256color, this uses a conditional expression. But it does that # for a different reason: to make it readily usable for applications which # print text but also use RGB colors, it uses a color map for the usual ANSI # colors (0-7) and RGB colors for the remaining range of the color value. xterm+direct|xterm with direct-color indexing, RGB, colors#0x1000000, pairs#0x10000, initc@, op=\E[39;49m, setab=\E[ %? %p1%{8}%< %t4%p1%d %e48\:2\:\: %p1%{65536}%/%d\:%p1%{256}%/%{255}%&%d\:%p1%{255}%&%d %; m, setaf=\E[ %? %p1%{8}%< %t3%p1%d %e38\:2\:\: %p1%{65536}%/%d\:%p1%{256}%/%{255}%&%d\:%p1%{255}%&%d %; m, setb@, setf@, xterm-direct|xterm with direct-color indexing, use=xterm+direct, use=xterm, # # This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color. # To use it, your decTerminalID resource must be set to 200 or above, and the # sunKeyboard resource set to true. # # HTS \E H \210 # RI \E M \215 # SS3 \E O \217 # CSI \E [ \233 # xterm-8bit|xterm terminal emulator with 8-bit controls (X Window System), OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX, colors#8, cols#80, it#8, lines#24, pairs#64, acsc=``aaffggiijjkkllmmnnooppqqr rssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z, civis=\233?25l, clear=\233H\2332J, cnorm=\233?25l\233?25h, cr=\r, csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=\n, cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h, dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M, ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, flash=\233?5h$<100/>\233?5l, home=\233H, hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@, il=\233%p1%dL, il1=\233L, ind=\n, invis=\2338m, is2=\E[62"p\E\sG\233m\233?7h\E> \E7\233?1;3;4;6l\2334l\233r \E8, ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kc1=\217q, kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B, kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~, kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~, kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~, kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~, kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M, knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i, meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m, ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l, rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m, rs1=\Ec, rs2=\E[62"p\E\sG\233m\233?7h\E> \E7\233?1;3;4;6l\2334l\233r \E8, sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm, setb=\2334 %? %p1%{1}%= %t4 %e %p1%{3}%= %t6 %e %p1%{4}%= %t1 %e %p1%{6}%= %t3 %e %p1%d %; m, setf=\2333 %? %p1%{1}%= %t4 %e %p1%{3}%= %t6 %e %p1%{4}%= %t1 %e %p1%{6}%= %t3 %e %p1%d %; m, sgr=\2330 %? %p6 %t;1 %; %? %p2 %t;4 %; %? %p1%p3%| %t;7 %; %? %p4 %t;5 %; %? %p7 %t;8 %; m %? %p9 %t\E(0 %e \E(B %;, sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=, smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR, u7=\E[6n, u8=\233[?%[;0123456789]c, u9=\E[c, vpa=\233%i%p1%dd, use=xterm+kbs, # xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System), OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX, XT, colors#8, cols#80, it#8, lines#24, pairs#64, acsc=``aaffggiijjkkllmmnnooppqqr rssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>, kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~, kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C, kb2=\EOE, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kend=\EOF, kent=\EOM, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S, kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q, kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R, kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\EOH, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, meml=\El, memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, setb=\E[4 %? %p1%{1}%= %t4 %e %p1%{3}%= %t6 %e %p1%{4}%= %t1 %e %p1%{6}%= %t3 %e %p1%d %; m, setf=\E[3 %? %p1%{1}%= %t4 %e %p1%{3}%= %t6 %e %p1%{4}%= %t1 %e %p1%{6}%= %t3 %e %p1%d %; m, sgr=\E[0 %? %p6 %t;1 %; %? %p2 %t;4 %; %? %p1%p3%| %t;7 %; %? %p4 %t;5 %; %? %p7 %t;8 %; m %? %p9 %t\016 %e \017 %;, sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, ka2=\EOx, kb1=\EOt, kb3=\EOv, kc2=\EOr, use=xterm+alt1049, use=xterm+kbs, xterm-xfree86|xterm terminal emulator (XFree86 4.4 Window System), use=xterm-xf86-v44, # # Compatible with the R6 xterm, with the following changes: # + added acsc (perhaps some versions of tic assume the standard vt100 # alternate character set) # + added u6, u7, u8, u9 strings for Daniel Weaver's tack program. # + added kmous string for ncurses. # + added khome/kend strings (which conflict with kfnd/kslt, see note). xterm-r6|xterm X11R6 version, OTbs, am, km, mir, msgr, xenl, cols#80, it#8, lines#24, acsc=``aaffggiijjkkllmmnnooppqqr rssttuuvvwwxxyyzz{{||}}~~, bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[ ?1;3;4;6l\E8, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kmous=\E[M, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[ ?1;3;4;6l\E8, sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, use=xterm+kbs, use=xterm+decedit, xterm-old|antique xterm version, use=xterm-r6, # # Compatible with the R5 xterm, with the following changes: # + changed 'blink=@', to 'blink@' (the former meant that "@" would start # a blink, the latter that it is not supported). # + changed kf1 through kf4 to correspond with actual usage. Though X # supports keypad symbols for PF1 to PF4, and xterm interprets these # correctly, the F1 to F4 codes are commonly (but incorrectly) used. # + moved reset string from rs1 to rs2, to correlate better with termcap. # + make khome consistent with other entries. # + use rmul/smul, rmir/smir from termcap, but not rmcup/smcup because # not everyone wants the alternate screen. # + added u6, u7, u8, u9 strings for Daniel Weaver's tack program. # + added kmous string for ncurses. xterm-r5|xterm R5 version, OTbs, am, km, msgr, xenl, cols#80, it#8, lines#24, bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h \E[m\E[r\E[2J\E[H, sc=\E7, sgr=\E[ %? %p1 %t;7 %; %? %p2 %t;4 %; %? %p3 %t;7 %; %? %p4 %t;5 %; %? %p6 %t;1 %; m, sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, use=xterm+kbs, # # # Customization begins here. # # This is the only entry which you should have to customize, since "xterm" # is widely used for a variety of incompatible terminal emulations including # color_xterm and rxvt. xterm|X11 terminal emulator, use=xterm-new, # use=xterm-r6, # This fragment is for people who cannot agree on what the backspace key # should send. xterm+kbs|fragment for backspace key, kbs=^H, # kbs=^?,