qbit/xenocara
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
4,891 Commits 1 Branch 0 Tags 396 MiB
5f423ee277
Commit Graph

655 Commits

Author SHA1 Message Date
okan
b7cd8019f2 Purely mechanical; unify 'num', 'no' and 'shortcut'. 2014-08-20 15:15:29 +00:00
okan
045b994659 Split off group window restacking. 2014-08-20 13:42:27 +00:00
okan
2c1d1423f8 whitespace 2014-08-20 12:35:39 +00:00
okan
cb5bdeabf0 fix a misleading comment and function name 2014-08-20 12:33:12 +00:00
okan
f819bd3e15 Remove unnecessary memset since reload was replaced with restart; 
from Kent Spillner.
 2014-08-19 18:39:41 +00:00
okan
7fd50277e7 Pull highstack from group_ctx (and useless calculations of); in the one 
place that we use highstack, replace that usage with a local variable
(for now until stacking is done properly).
 2014-08-19 12:47:51 +00:00
okan
c4aace036f Get rid of nhidden in group_ctx; it actually never reported correctly 
since nhidden wasn't incremented nor decremeted in all the right places,
thus confusing matters.  We don't need to carry a count around, so just
use a local variable in the one place we need one to supply
XRestackWindows().
 2014-08-18 13:57:57 +00:00
okan
0cb1db2d4c plug memleak (currently unused func); from Tiago Cunha 2014-04-21 12:52:14 +00:00
okan
877931bf62 Alignment fix; found the hard way on sparc64 by landry@ (and thanks too 
for fast access to a box!)

ok deraadt@, matthieu@
 2014-02-27 00:52:57 +00:00
okan
875128a0cb Make sure we cycle through existing client's group membership and set 
the hidden state on the group; important to know group hidden state
after a re-exec or restart of cwm (as easily seen in group menu).
 2014-02-08 02:49:30 +00:00
okan
1a7c8d161a Replace a few hand rolled loops with like tailq loops. 2014-02-08 02:40:43 +00:00
okan
92bf6935f5 all mapped clients now should have a group, so simplify some cases 2014-02-07 21:59:56 +00:00
okan
60a1b7520a If _NET_WM_DESKTOP is set to -1 during client creation, place the client into 
group 0 (nogroup); solves problem initially discovered by oga@nicotinebsd with
tint2.  A clientmessage *after* client creation already handles this case.

Go further and assign every client to a group; in non-sticky mode, group 0
(nogroup) and sticky mode, the active group.  In both cases, autogroup will
override the group assignment.  Removing a group from a client always places
the client back into group 0 (nogroup).  Autogroup can also assign a client to
group 0 (nogroup) to keep a client always visible (unless of course one opts to
hide all clients).
 2014-02-07 18:09:54 +00:00
okan
b23ca72ab1 Some clients set the urgency flag even if they are the active client; 
prevent annoying behavior by only setting the cwm urgency flag if the client
is not active; diff from Thomas Adam.
 2014-02-06 20:58:46 +00:00
okan
16de3733be Introduce a region queue and replace screen's XineramaScreenInfo; we 
still use Xinerama to populate the regions per screen, but will switch
at a more appropriate time.
 2014-02-03 21:07:47 +00:00
okan
4c3987dcc1 make this XQueryTree like the other 2014-02-03 20:29:05 +00:00
okan
ea2abae9f3 Move redundant bits from screen_init (while dealing with existing 
clients) directly into client_init, performing the X roundtrip only
once. With the previous change in maprequest, this moves decision making
into one place for creating new clients.
 2014-02-03 20:20:39 +00:00
okan
bb4485df6b Move redundant window attr fetch from maprequest directly into 
client_init and perform that X roundtrip only once.
 2014-02-02 21:34:05 +00:00
okan
03847f1c2e No need to store screen colormap and visual; rather just use the X 
macros in the one place they are needed.
 2014-02-02 16:29:04 +00:00
okan
49f2f86dbd Unlike free(3), XFree(3) can't be passed a NULL pointer. 2014-02-02 16:13:50 +00:00
okan
4ce9b05438 The menu already limits entries with MENU_MAXENTRY, so don't bother 
holding a command name limit as well.
 2014-02-02 15:46:05 +00:00
okan
9062093012 Take menu's bwidth into account for position/size; reported by Thomas Adam. 2014-02-01 19:28:46 +00:00
okan
d413fd6b56 Let the config parser continue parsing even after encountering an error; 
original idea (with now-outdated patch) from Thomas Adam.  Since we now
report where errors exist, this now makes more sense.  Expand a bit on
config file parsing in the cwm(1).

Discussed with a few, including sthen; ok sthen.
 2014-02-01 00:25:04 +00:00
okan
364a7628cb re-add lost free from previous 2014-01-30 22:41:16 +00:00
okan
4de6836838 Switch ignoreq to winname struct since it's basically the same thing; 
removes limit on name matching.
 2014-01-30 22:17:22 +00:00
okan
ca2497d48b use the same autogroupwin variable as everywhere else 2014-01-30 15:43:53 +00:00
okan
9f5aa96cc7 Move cwm_status around to avoid header fu, and remove extraneous signal 
header from xevents.c; noticed by Christian Neukirchen.
 2014-01-30 15:41:11 +00:00
okan
06d9319772 Remove duplicate mouse functions and instead use the kbfunc ones. No 
user visable changes at this point, but they'll merge at an appropriate
time.
 2014-01-30 14:40:21 +00:00
okan
d5979e3ab6 Minimize trivial differences between a few kb and mb functions. 2014-01-29 22:30:00 +00:00
okan
e2d5d73e53 keybinding -> key binding 2014-01-29 21:17:33 +00:00
okan
78ff1f748c Merge keybinding and mousebinding queues into using the same merged 
struct, binding; they were essentially the same accept for what was
'pressed', keysym or button.
 2014-01-29 21:13:52 +00:00
okan
cd007c0d08 Much like we do for keyboard and mouse bindings, remove duplicates for 
command name - last match.
 2014-01-29 18:43:27 +00:00
okan
2ffb124daa Check command name/path for truncation and provide user feedback during 
config parse (and use conf_cmd_add to populate defaults); based on a
discussion with Tiago Cunha.  While this looks ugly, there are likely
some other changes here to come.
 2014-01-29 18:34:22 +00:00
okan
0590f4c1fc Check ignore windowname for truncation and provide user feedback during 
config parse; based on a discussion with Tiago Cunha.
 2014-01-28 20:22:21 +00:00
okan
2d6c7c78d8 The EWMH spec states that if the cardinal returned is 0xFFFFFFFF (-1) 
then the window should appear on all desktops, which in our case is
assigned to group 0.  Found to fix stalonetray due to the non-ewmh aware
range checking in group_movetogroup(); from Thomas Adam.
 2014-01-28 13:40:40 +00:00
okan
e395fd7bea Move conf_init/clear into main - no behaviour change; from Tiago Cunha. 2014-01-28 00:42:20 +00:00
okan
beb28798ef move some init up and shed some blank lines 2014-01-27 15:13:09 +00:00
okan
fad126f1a3 simplify parse_config using assignment; inspired by a very old diff from 
Tiago Cunha.
 2014-01-27 14:49:40 +00:00
okan
d0425acdda more range checking 2014-01-24 22:38:02 +00:00
okan
66e13c1a60 correct arguments and drop the cast. 
sanity check by oga@nicotinebsd
 2014-01-24 15:08:06 +00:00
okan
9ffdedb82e no need to quote within warning 2014-01-23 17:13:38 +00:00
okan
40c619037f If no title is supplied, term uses only the basename for its title. 
This is useless when searching for windows launched via the ssh command
menu; supply a more useful title: '[ssh] <hostname>'.

Idea from todd@, ok todd@
 2014-01-23 16:51:28 +00:00
okan
b740a0a91a zap whitespace 2014-01-22 22:41:09 +00:00
okan
fa2846fe29 cwm_argv doesn't need to be global any longer 2014-01-22 22:26:05 +00:00
okan
3aff0ea880 start properly releasing X resources during teardown 2014-01-22 22:14:02 +00:00
okan
3b8ad25f38 Somewhat streamline event loop/restart/quit handling; most notable 
change allows a restart to trigger proper teardown first, even though
teardown is not (yet) complete.

After some discussion with oga@nicotinebsd.org regarding a more
complicated version/idea.
 2014-01-22 21:48:27 +00:00
okan
b92e846e56 Sprinkle a few more const; from Tiago Cunha. 2014-01-21 15:42:44 +00:00
okan
69bb069674 Save the ptr position before lowering via kbd, so as to be able to cycle 
back with the pointer in the right place; matches behaviour when
lowering via the mouse function.
 2014-01-20 23:18:47 +00:00
okan
57bbf0fd90 merge KBFLAG_NEEDCLIENT and MOUSEBIND_CTX_*; brings kbfunc and mousefunc 
bits even closer.
 2014-01-20 23:03:51 +00:00
okan
42e2d07b2b Use argument to pass down flags for mousefunc cyclegroup; removes 
rcyclegroup wrapper need - now similar to kbfunc.
 2014-01-20 22:31:53 +00:00