qbit/xenocara
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
4,919 Commits 1 Branch 0 Tags 396 MiB
28f5392d74
Commit Graph

667 Commits

Author SHA1 Message Date
okan
d8afbe1a8b handle _NET_ACTIVE_WINDOW ClientMessage; from Alexander Polakov. 2013-05-20 21:19:15 +00:00
okan
0667dd4edd add support for _NET_WM_STATE_MAXIMIZED_{HORZ,VERT}; from Alexander Polakov. 
while I'm unsure of the final look of _NET_WM_STATE, there's no reason
to delay this support.
 2013-05-20 21:13:58 +00:00
okan
bd38e60d03 - configure menuwin with the screen, then create the xft drawable using 
the menu window since that's the only place on which we draw
- elminate the need to change the drawable on every font draw
 2013-05-20 20:21:04 +00:00
okan
85d547bcc5 no reason to pass around *sc when it's already in menu_ctx. 2013-05-20 20:04:36 +00:00
okan
ce73dfea93 move the 2 small font helper functions to xutil.c 2013-05-19 23:38:20 +00:00
okan
f3337f150c move the rest of xft init into screen_conf, since most of it is based on 
config parameters.
 2013-05-19 23:16:29 +00:00
okan
9baf72c106 - switch border colors to Xft 
- merge border/menu color structures/functions since they now both use Xft
- switch xu_xorcolor to operating on XftColor instead of just
  XRenderColor (basically adding pixel)
- if color name allocation fails, revert back to default (this, along
  with font validation should occur during config parse, but we don't
  have screens setup yet - likely to change at some point)
 2013-05-19 23:09:59 +00:00
okan
1f7de62e0c add support for _NET_CLOSE_WINDOW 2013-05-19 17:05:52 +00:00
okan
e8ab9bac94 treat WM_CHANGE_STATE like other atoms 2013-05-19 17:03:55 +00:00
okan
f67063c034 use XGetWMProtocols and simplify WM_PROTOCOL handling 2013-05-19 17:02:04 +00:00
okan
54d74a2ed2 simplify 2013-05-19 17:01:29 +00:00
okan
a6a2d45671 if -> ifdef 2013-05-14 13:39:53 +00:00
okan
7f75636e2f - let callers of font_draw figure out (and pass) the color instead of an 
'active' flag.
- use strlen() inside of font_draw; the only instance where it wasn't
  used happened to be ignored on a subsequent draw.
 2013-05-14 12:35:56 +00:00
okan
27a9825a40 swap x/y calculations in kbd move/resize to match those in the respective mouse functions 2013-05-11 22:03:17 +00:00
okan
7ab1469590 new -> init 2013-05-11 22:01:07 +00:00
okan
f00ab96178 replace conf_{gap,color,font} with conf_screen since really we are 
configuring the screen *after* parsing, just as we do a conf_client on
client manage.
 2013-05-11 21:46:27 +00:00
okan
dc5b3b52df more type fixes for mask/button 2013-05-10 16:32:47 +00:00
okan
6ab8a91ea8 spacing 2013-05-10 16:10:40 +00:00
okan
8044f37078 int type fixes 2013-05-10 16:05:34 +00:00
okan
f0fe071b5a fix KeySym type 2013-05-10 15:44:43 +00:00
okan
384bb6c501 border width/color makes sense for some, so put it back 2013-05-07 01:35:41 +00:00
okan
fb30b6ad26 negative values for borderwith, moveamount, snapdist and gap are 
configuration errors, so warn and load defaults.
 2013-05-06 19:09:19 +00:00
okan
52cbef8a12 remove group in client_delete directly. 2013-05-06 16:03:11 +00:00
okan
ed984685b1 border width/color makes no sense on menuwin 2013-05-06 16:00:34 +00:00
okan
72e88bc952 - no need to position and size the menu window before an Expose event 
since we'll be calculating required size later anyway; allows us to
  consolidate all prompt/display/search string building goop into
  menu_draw.
- reset the pos/size of menuwin when leaving a menu.
- reverse the 'prompt' NULL check to be consistent with 'initial' one
  and fix a whitespace nit while here.
 2013-05-02 20:18:35 +00:00
okan
c3f5c37243 zap leftover debug printf 2013-05-02 19:41:52 +00:00
okan
ed8f41814a get rid of cc->name in the resize box and make dimensions more readable. 2013-05-02 19:33:17 +00:00
okan
5e2856ce65 only redraw the name/size box when the client resizes, not every time 
there's movement; should slightly help with resize syncs.
 2013-05-02 19:30:10 +00:00
okan
f0a6447140 no need for font_{ascent,descent,height} wrappers; limit font_width to 
just requiring xftfont.
 2013-05-02 17:25:15 +00:00
okan
b0af7028d0 group conf_* init functions 2013-04-30 21:12:20 +00:00
okan
66a7b7fbf9 missing proto 2013-04-30 21:11:07 +00:00
okan
3b69bf465e type fix 2013-04-30 21:10:23 +00:00
okan
87e16df157 use an int in screen_init and avoid needing to cast for screen number (which). 2013-04-29 00:56:47 +00:00
okan
fe3f832f4b mechanical xu_{get,set}state -> xu_{get,set}_wm_state change 2013-04-17 13:57:06 +00:00
okan
62aed144f2 slightly rework WM_STATE set/get to make it less ambigious; will be more clear 
on what needs to change to make it right in the end.
 2013-04-17 13:52:20 +00:00
okan
fbc1e7edbd zap extra space 2013-04-17 13:31:47 +00:00
okan
373f1ddf90 add conf_ignore and move group_make_autogroup to conf_autogroup to match. 2013-04-17 13:30:38 +00:00
okan
726def3405 only a window is required to set WM_STATE. also un-confuse xu_ptr_getpos 
by using 'win' instead of 'rootwin' so as not to imply only the root
window is queried, rather any window.
 2013-04-14 16:13:17 +00:00
okan
461decc718 we handle WM_STATE here, so remove misleading comment. 2013-04-12 20:54:27 +00:00
okan
2dfe178aa9 we already set window state in client_hide or client_unhide right before, so 
there's no need to do it again.
 2013-04-12 20:45:57 +00:00
okan
5e28ed99db makes no sense to set an error handler which uses X_Dpy before XOpenDisplay. 2013-04-12 14:49:16 +00:00
okan
0b6abd364f push Screenq into screen_init 2013-04-12 14:46:30 +00:00
okan
a7e1ba7503 _NET_WM_NAME is UTF8_STRING type 2013-04-10 19:08:09 +00:00
okan
a1a6245df6 plug memleak; always need to menuq_clear even when a selection is made. 2013-04-08 15:43:04 +00:00
okan
4ad10add15 reverse logic to make it like the others 2013-04-08 13:05:27 +00:00
okan
a395df4a8f consistency 2013-04-08 13:02:31 +00:00
okan
29a51173bc missing prototype 2013-04-08 00:56:21 +00:00
okan
ec8c1c2f0f add missing proto; replace magic number 2013-04-05 17:36:02 +00:00
okan
13a11c8799 zap stray whitespace 2013-04-05 17:07:25 +00:00
okan
1eec28aa57 - no reason to breakout ClassHints work, so fold into client_{new,delete}, 
but keep _MOTIF_WM_HINTS separate.
- simplify fetching app/class hint.
- fix _MOTIF_WM_HINTS Atom type.
 2013-04-03 20:22:55 +00:00
okan
01d25075d0 honor PATH search order for exec; from Andres Perera. 2013-04-03 19:28:00 +00:00
okan
b0d374e0fb move XUngrabServer to the end of client_new() to avoid races where clients, 
such as those using sdl, attempt to manage the clients themselves when the
clients aren't fully ready.  other wm's grab the xserver during the whole
client setup process, so match.

behavior found by jsg.
 2013-04-03 19:20:50 +00:00
okan
118cf232b6 replace handrolled for loop with TAILQ_FOREACH; from andres.p@zoho.com 2013-03-09 21:55:56 +00:00
okan
a39c86a915 put back r1.68 which allows an empty group to be sticky; behavior 
change noticed by Thomas Pfaff and diagnosis why we need to
group_setactive in this case by Alexander Polakov.  replace XXX with
a useful comment.
 2013-01-13 13:55:12 +00:00
okan
01f04be317 set the initial group to '1', missed by recent off-by-one group 
numbering re-work; discovered the hard way by sthen@.

ok sthen@
 2013-01-10 15:28:11 +00:00
okan
a56cb7d9d2 add per-group vert/horiz tiling support; introduces 2 new bind commands, 
'vtile' and 'htile'; from Alexander Polakov.
 2013-01-08 15:16:04 +00:00
okan
62ff18b6d7 teach screen_find_xinerama() about gap and adjust (simplify) callers; 
menu becomes gap-aware for free.
 2013-01-08 04:12:51 +00:00
okan
1124cee92f fix menu/client placement in panning setups; XineramaQueryScreens gives 
us the width of the psuedo screen, but here we need the edge instead
(xmax/ymax); just re-use w/h here for now.
 2013-01-07 21:53:23 +00:00
okan
5c111b8c13 revert previous 2013-01-07 21:45:24 +00:00
okan
0fc885f41e unbreak xinerama support from r1.41 for panning setups 2013-01-07 20:32:19 +00:00
okan
968dc645ee use cc->bwidth in client_vmax since we've yet to reset it (matches 
client_hmax); from Jan Stary
 2013-01-06 01:01:26 +00:00
okan
65585e276f rename {h,v}max functions for consistency; from Jan Stary 2013-01-04 16:30:03 +00:00
okan
8ca4aa87e7 really these are just border colors, so adjust the define 2013-01-04 16:27:58 +00:00
okan
41fd96bb01 spacing 2013-01-04 16:23:51 +00:00
okan
9e11fcccad get rid of struct color 2013-01-04 16:23:04 +00:00
okan
07daaf479c pass the screen workarea, as opposed to viewarea, allowing client 
snapping to honor gap.
 2013-01-02 21:41:14 +00:00
okan
7fa6ca94df re-work client_snapcalc() so it takes client and edge dimensions with 
snapdist; allows for simplier snap calculations.

required for an upcoming diff for honoring gap.
 2013-01-02 21:37:21 +00:00
okan
68cdbb853d merge in Xinerama screen query; no functional change. 2013-01-02 18:11:23 +00:00
okan
10e814fedf have screen_find_xinerama() return struct geom *reliably* instead of 
XineramaScreenInfo; simplifies goop around the callers.
 2013-01-02 16:26:34 +00:00
okan
23c2576b3c more variable consistency 2013-01-02 02:19:20 +00:00
okan
621a7f2c53 info->xine, for consistent variable names 2013-01-02 02:02:08 +00:00
okan
f26b8dff2e after we toggle a group hidden, it makes no sense to set it as active 
(in sticky or non-stick mode), regardless of existing clients assigned
to that group; oga marked this bit XXX in -r1.34 for it didn't seem make
sense then either.

pulled from a diff from from Alexander Polakov.
 2013-01-01 14:50:01 +00:00
okan
572328d529 least intrusive way to plug a memleak when unbinding a duplicate key for 
kbfunc_cmdexec; from Tiago Cunha
 2013-01-01 14:33:52 +00:00
okan
f67f32f8a5 replace emptystring with strdup here as well so we know we are free'ing 
a malloc'd variable everytime; from Tiago Cunha
 2013-01-01 14:26:29 +00:00
okan
12bed5f129 make num of groups no longer off-by-one; from Alexander Polakov 
note that a re-exec of cwm will not rewrite the group number atom of
*existing* clients, so they will remain off-by-one until each client has
its atom updated, or of course a restart of X.
 2013-01-01 14:19:56 +00:00
okan
f718e8894b gc unused cmd 'flags' variable 2012-12-19 15:21:34 +00:00
okan
9a1820657c expand CHILDMASK 2012-12-18 18:39:55 +00:00
okan
ab9f6dbbff use MOUSEMASK since we already have it 2012-12-18 18:35:36 +00:00
okan
565c84cc7a remove unused SEARCHMASK 2012-12-18 17:44:18 +00:00
okan
7f6aabcb3d define LockMask|Mod2Mask; no functional change 2012-12-18 17:37:39 +00:00
okan
44784133e7 simplify config file setup; with Tiago Cunha 2012-12-18 00:14:41 +00:00
okan
4766921753 put a default known_hosts into conf 2012-12-17 23:54:57 +00:00
okan
eabe498038 pull user home directory via getenv or getpwuid and stash it so we don't 
need to do this everytime; with Tiago Cunha
 2012-12-17 23:03:41 +00:00
okan
b08541104f cmap -> colormap in client_ctx 2012-12-17 18:35:26 +00:00
okan
2410477c9d stash the default screen visual and colormap in screen_ctx 2012-12-17 18:34:06 +00:00
okan
8f15d97537 replace client highlight with a client flag 2012-12-17 17:48:57 +00:00
okan
4ef0e7d9d2 make client_mtf static 2012-12-17 14:58:46 +00:00
okan
1c7a3484bf create and use menuq_clear() helper; from Tiago Cunha 2012-12-17 14:32:39 +00:00
okan
b926f75dcc current_client() returns _curcc, so use it where appropriate 2012-12-17 14:26:29 +00:00
okan
887ac8ab28 screen font -> xftfont 2012-12-17 14:20:52 +00:00
okan
5ca4dca2e3 knf 2012-12-17 02:53:29 +00:00
okan
52982ae188 non-trivial menu drawing rewrite, moving to Xft and solving various 
font/color drawing issues; from Alexander Polakov
 2012-12-17 02:28:45 +00:00
okan
00eccbe44f zap extra lines 2012-11-29 16:50:03 +00:00
okan
d43f96b65c specific last match for autogroup; few iterations with Kent Spillner. 2012-11-29 04:25:49 +00:00
okan
ddf27615e6 x_setupscreen -> screen_init; no functional change. 2012-11-29 03:54:46 +00:00
okan
58353e9599 remove dead extern 2012-11-29 03:34:19 +00:00
okan
db22777ba0 add xasprintf() for upcoming changes. 2012-11-28 14:32:44 +00:00
okan
9c0280009c ever since the 9wm code bits were removed or replaced, this file has 
been a no-op, for each source file has a complete license marker (ISC).

no objections from oga, who did the 9wm rewrite/remove work in 2008.
 2012-11-28 14:25:05 +00:00
okan
096354b57d replace hand rolled font_make() with XftFontOpenName() and merge into 
font_init().
 2012-11-28 14:14:44 +00:00
okan
50585c9a89 add some checks 2012-11-16 14:15:48 +00:00
okan
48634b386c variable name consistency; from Thomas Pfaff 2012-11-14 21:31:53 +00:00
okan
89bef83e09 tab-complete buglet fix: once exec_path is completed, allow for 
subsequent completion; from Alexander Polakov
 2012-11-14 21:12:24 +00:00
okan
4f78cb6835 sort 2012-11-09 03:52:02 +00:00
okan
81715b0acb fix some warnings; inspired by a diff from Thordur Bjornsson. 2012-11-08 20:18:19 +00:00
okan
74af9940e6 style nit; from Tiago Cunha. 2012-11-07 21:10:32 +00:00
okan
02dbbaba8a add comment why we mouse unbind, just like kbd 2012-11-07 21:04:55 +00:00
okan
62f3e39ff4 now that we have FOREACH_SAFE queue macros, use them where appropriate; 
from Tiago Cunha.
 2012-11-07 21:01:48 +00:00
okan
8d78ddf545 plug a leak when using 'unmap' for kbd/mouse bindings; from Tiago Cunha. 2012-11-07 20:37:55 +00:00
okan
1e3fec4362 get rid of the xfree() wrapper around free(); from Tiago Cunha. 2012-11-07 20:34:39 +00:00
okan
1d807310d5 clarify windowname and windowclass values are pulled from the WM_CLASS 
property; from Kent Spillner
 2012-11-07 14:59:07 +00:00
okan
0fa8ad10b0 zap trailing space 2012-11-07 14:58:26 +00:00
okan
4f79744f37 missing headers; from Thordur Bjornsson. 2012-11-07 14:49:46 +00:00
okan
b01ce50ca5 spacing 2012-11-07 14:40:51 +00:00
okan
8bbba5aed3 tab completion support for menus; from Alexander Polakov. 
ok sthen@ on an older incarnation
 2012-11-07 14:39:44 +00:00
okan
09b4f89a44 try to clarify xprop(1) output, with respect to WM_CLASS, without going 
overboard; suggested idea by jmc
 2012-11-01 01:10:47 +00:00
okan
17e94be7be no longer a reason to carry conf_path in struct conf, so dice. 2012-10-31 22:06:24 +00:00
okan
34267fe638 replace 'reload' with 'restart', which merely re-exec's cwm using the 
existing argv; same idea with respect to argv saving as Alexander
Polakov.  reload support was half-complete and is getting in the way.

agreed to by many
 2012-10-31 19:30:19 +00:00
okan
d6b5535794 on reload, run each client through conf_client to pick up potential 
ignore and bwidth changes; also add a hack for existing maximized
windows so they don't inherit a new bwidth.

based on a diff from, and discussion with, Tiago Cunha.
 2012-10-29 19:46:03 +00:00
okan
b3191069d5 clarify autogroup option; based on diffs from kspillner@acm.org with 
feedback from jmc
 2012-10-28 20:13:02 +00:00
okan
72f1943e2c comment what this whole bit does, not just part of it. 2012-10-23 16:13:59 +00:00
okan
b94eed0ab4 add a height to struct menu and use it in the most obvious of places. 2012-10-23 16:08:59 +00:00
okan
770189e8ac treat menu width the same as the height is treated when deciding its 
max size and location; partially from a diff from Alexander Polakov.
 2012-10-23 15:50:15 +00:00
okan
44b83028a3 Stop drawing when menu doesn't fit inside the screen; picked from a 
larger diff from Alexander Polakov.
 2012-10-23 15:32:38 +00:00
okan
762473fe35 revert previous for now until a way to test more than a few encodings is found 2012-09-12 15:09:33 +00:00
okan
2a98b1a00b be explicit in which key masks we allow during keypress and buttonpress 
events; from Alexander Polakov - makes non-us layout reliable.
 2012-09-10 13:28:04 +00:00
okan
a78478db77 replace with xu_getprop wrapper used everywhere else. 2012-09-09 20:52:57 +00:00
okan
ab1deebeda extend client_resize so that it can know when to reset max flags and 
bwidth; this allows a client to be resized from a max state, which now
gets treated like a non-max'd client.  based on a diff that does part of
this in a different way from Alexander Polakov.
 2012-09-09 19:47:47 +00:00
okan
f4e0469f06 support multibyte input to menu code; from Alexander Polakov with a tiny tweak. 2012-08-07 14:05:49 +00:00
okan
9e50f2e028 Further simplify Xinerama init and re-init on XRR events. 
While testing for Xinerama during setup was done display-wide, each time
XineramaQueryScreens() is called either in start-up or due to an XRR
event, the library re-tests for the Xinerama extension anyway before
moving on; so the initial test is redundant and allows another global to
go away with one other change: always fill in sc->xinerama (and _no),
regardless of the success of malloc in XineramaQueryScreens(), and use
it to see if Xinerama dimensions exist when asked by client and/or menu
code.
 2012-07-18 21:53:22 +00:00
okan
476b0dcf17 unify various max routines to match client placement and partially menu ones 
when calculating screen dimensions.
 2012-07-16 01:53:14 +00:00
okan
8a8244095d check value 2012-07-16 01:42:00 +00:00
okan
147b66e3ac move the HasXinerama check into screen_find_xinerama and simplify logic; 
moves closer to logic in menu code.
 2012-07-16 01:36:30 +00:00
okan
94b92cf7fb re-use geom struct in client_ctx (saved)geometry. 2012-07-13 17:01:04 +00:00
okan
6ee7c6534f convert xmax/ymax uses to view geometry. 2012-07-13 15:21:35 +00:00
okan
3f2059e461 introduce screen "view" area and "work" area (gap applied) to simplify 
various blocks that require understanding the screen geometry.
 2012-07-13 14:18:04 +00:00
okan
3ce93c9b3b fix atom for setting WM_STATE. 2012-07-08 02:55:01 +00:00
okan
8260032aee fix atom for retrieving WM_STATE between re-exec's. 2012-07-08 02:50:41 +00:00
okan
0ec36603b5 remove a redundant assignment and another one up. 2012-07-08 01:00:24 +00:00
okan
37bdf57a02 querying for Xinerama should be done per display, not per screen, so 
move chuck to display init; allows some shuffling to occur limiting
screen_init_xinerama()'s scope while keeping order intact.
 2012-07-06 14:18:00 +00:00
dcoppa
78655b3e88 Add a couple examples of keybindings using keysyms, as discussed 
with okan@ and sthen@.

OK okan@, sthen@
 2012-07-06 08:41:29 +00:00
okan
43b628a3d0 the display's width and height are updated after an XRandR event so we 
don't need to pass down the new values to screen_update_geometry(); so
just read the width/height values directly for both uses of
screen_update_geometry().  prep for further changes in this area.
 2012-07-05 17:35:13 +00:00
okan
e52aef56f0 assign and use screen ctx where appropriate and consistently. 2012-07-04 23:42:03 +00:00
okan
3a1ddcb19e use the screen ctx since we already have it assigned. 2012-07-04 18:07:12 +00:00
okan
74ef1605a1 fix missing atom (WM_PROTOCOLS) wrt new style handing; without this, the 
window manager didn't know if a client supported CLIENT_PROTO_DELETE and
thus used a hammer, XKillClient.

behaviour reported by Tim van der Molen.
 2012-07-04 18:00:13 +00:00
okan
d24974f4cb re-implement atom handing; makes for a normalized and more consistent 
separation between cwm and ewmh.  seen by a few.
 2012-07-03 13:49:03 +00:00
okan
50687e789b get rid of more stray lines/spaces 2012-05-16 21:57:21 +00:00
okan
838f6a5713 instead of using the menu window for _NET_SUPPORTING_WM_CHECK, create a 
dummy one to use instead; allows us to not have to wait for menu_init(),
so re-shuffle _NET_SUPPORTED slightly.

ok sthen@
 2012-05-16 01:17:14 +00:00
okan
61a281d1f3 fix comment 2012-05-16 01:10:11 +00:00
okan
adfd269db7 cycle through other common cycling modifiers; based on a diff from 
Alexander Polakov.

ok sthen@
 2012-05-16 01:09:17 +00:00
okan
abc316c162 convert from deprecated XKeycodeToKeysym to XkbKeycodeToKeysym 
ok sthen@
 2012-05-16 01:04:36 +00:00
okan
87d3c25241 altpersist->cycling to be more clear that this is for cycling mod 
persistence; based on a diff from Alexander Polakov, in preparation for
looping through other potential cycling modifiers.
 2012-05-13 15:17:13 +00:00
okan
6dcdd18c5a knf, some from a diff from Tiago Cunha. 2012-05-13 15:15:54 +00:00
okan
dcfe652e93 wrap long lines; from Tiago Cunha. 2012-05-10 00:39:47 +00:00
okan
41a86560b4 fix section order: move AUTHORS below HISTORY; from Tiago Cunha 
ok jmc@
 2012-05-09 18:37:39 +00:00
pascal
0bb9a6d6a1 kill useless .Pp 
ok jmc@
 2012-05-07 21:25:29 +00:00
okan
42304914dc check if we're in the group already, else multiple calls to 
group_movetogroup() on one client will still increment nhidden if the
group is hidden.

found the hard way by Thomas Jeunet and fix from Alexander Polakov -
thanks to both!

ok oga@
 2011-12-29 20:48:38 +00:00
okan
a396addc5c put snapdist in the correct location; as an option, not a bind; Tiago Cunha. 
ok oga@
 2011-11-06 02:03:47 +00:00
okan
6f33ccac59 rename variable to reduce potential for name-space collision. 
bikesheding and ok oga@.
 2011-10-17 18:18:38 +00:00
okan
66bb8d02da use xfree instead of free since strings is allocated with xmalloc; from 
dhill

ok oga@
 2011-10-12 15:43:50 +00:00
okan
7a6e2b9d5a move client to group (movetogroup) and hide client only if group is 
already hidden (suggested behavior from Alexander Polakov).

ok sthen oga
 2011-09-19 07:23:03 +00:00
okan
e18bdf5702 fix spelling I keep getting wrong for some unknown reason; found by and 
diff from Alexander Polakov.
 2011-09-13 09:17:30 +00:00
okan
5d6aec2db4 add WM_TRANSIENT_FOR event support: moves dialogs, toolbars and such to 
the group of the main application window; based on a diff from Alexander
Polakov with CLIENT_IGNORE flag suggestion from oga@.

ok oga@
 2011-09-13 08:41:57 +00:00
okan
780e9cb0df repair groupcycle (broke after cycle-in-group support added more flags); 
found by and fix from Thomas Pfaff.

ok oga@
 2011-09-13 08:37:49 +00:00
okan
3f2d53b6dd allow configurable menu font color; from Alexander Polakov with a tweak 
from me.

ok oga@
 2011-09-08 12:35:33 +00:00
okan
107bc37429 allow menufg/menubg to be configurable; from Alexander Polakov. 
ok oga@
 2011-09-08 12:07:03 +00:00
okan
9ab59987f7 reinit menu on reload; from Alexander Polakov. needed for catching 
upcoming menu config changes.

ok oga@
 2011-09-08 12:00:49 +00:00
okan
9dabac6117 restore a comment and add another for clarity. 2011-09-05 07:37:55 +00:00
oga
d341c2bfd8 Make flavours of maximisation additive. 
i.e. horiz-max + vertmax = full maximisation.  full - horiz = vertmax.
etc.

Martynas wrote something like this once, so I did okan, this version
seems to finally deal with the corner cases.

ok okan@.
 2011-09-04 16:59:31 +00:00
okan
d1b5022611 split off window hints from geometry so we don't need to carry them all 
around when dealing with {,h,v}max.  same idea from oga.
 2011-09-03 09:42:33 +00:00
okan
ed6f73250e simplify color initialization. 
ok oga@
 2011-09-03 09:25:39 +00:00
okan
aa9dbd1dca Add {r,}cycleingroup to cycle through clients belonging to the same 
group as the active client (as opposed to all unhidden clients); from
Alexander Polakov, with a tiny tweak requested by oga.

ok oga@
 2011-09-03 09:20:58 +00:00
okan
f93ec1eba0 "defaultfont" is unclear (and confusing while reading code) when it also 
applies to the user supplied font, so rename.

ok oga@
 2011-09-03 09:17:16 +00:00
okan
d44962b456 zap unused macro. ok oga@ 2011-08-29 09:10:49 +00:00
okan
dda3ed6180 restore mouse move via the keyboard, noticed by todd@. while the check 
for cc was wrong due to the fact that cc->sc is always filled in during
the event, we don't even need it - just operate on the focused screen's
root window regardless.

ok todd@ oga@
 2011-08-29 09:09:45 +00:00
oga
af80ac7042 A while ago I wrote some code to not warp to ignored windows on map (rev 
1.52), not realising that the previous (less efficient) fix had already
been commited (rev 1.50).

Had this in my tree for ages to remove the previous code. Effectively
reverts rev 1.50.

ok okan@
 2011-08-22 16:34:34 +00:00
okan
661c8ef1c1 revert r1.11 of parse.y and create logic in conf_setup instead to deal 
with the various scenarios of when to attempt a parse of the config,
load defaults, and when to warn and/or exit.  triggered by bogus warning
first noticed by sobrado@.

ok oga@
 2011-08-22 16:18:05 +00:00
okan
648d5b0b39 Re-draw borders after reloading, not before; from Alexander Polakov. 
ok oga@
 2011-07-26 08:51:24 +00:00
okan
3826753e1a use the menu border; from Alexander Polakov, but with the existing define. 
ok oga@
 2011-07-25 15:41:05 +00:00
okan
bd65f03126 We are inconsistent when it comes to function returns, so just go all 
the way with the cwm specific parts.

ok oga@
 2011-07-25 15:10:24 +00:00
okan
24bf547e5f Clarify defines and make them not look like non-local ones; started by a 
small diff from Thomas Pfaff.

ok oga@
 2011-07-23 13:09:11 +00:00
okan
df02d70181 correct spelling; from Alexander Polakov. 2011-07-14 11:39:53 +00:00
okan
33023ff923 UTF8-ify, from Alexander Polakov, but without setlocale(), after 
feedback from stsp@ - thanks!

'go for it' oga@
 2011-06-27 12:46:54 +00:00
okan
9eac37010a warn if we can't parse the config file on start, just like we do on reload. 
part of a larger diff that was ok oga@
 2011-06-25 13:37:05 +00:00
okan
5f2753dc80 Since cwm(1) uses the same parser as others in src, document how 
comments and line extensions work.  Taken from sthen@'s recent
commit in src.

ok sthen@
 2011-06-25 13:12:56 +00:00
okan
0fd446f068 add 'normal' cursor and shuffle the others we use to make a bit more 
sense and to be slightly less un-expected.  from Alexander Polakov.
re-use 'normal' cursor now instead XC_hand1 for menu selection.  i
really wish X had real docs and made sense.

ok on earlier diff with '?' removed (but it's back now) oga@
 2011-06-24 06:52:23 +00:00
okan
53fbeb4e7a New option to raise a client via the mouse (unbound by default); 
opposing action, lower, already exists and bound.  Both keyboard
mappings already exist.

'no opinion either way' oga@
 2011-06-24 06:09:26 +00:00
okan
ffa68ab4a0 introduce a new config option to snap to the screen edge. 'snapdist' 
keyword taken from a diff from Sviatoslav Chagaev to do the same thing,
but implemented in a completely way (based on some very old code from
mk@).  default set to 0, so no behavior change.

ok oga@ (who would also like to take it further...)
 2011-06-24 06:06:24 +00:00
okan
c800341623 re-do various bits of {,h,v}max for simplicity and less flag handling. 
as a bonus, flipping between various combinations of vmax+hmax provides
a more predictable behavior.

commitski oga@
 2011-06-24 06:01:47 +00:00
okan
5e2c6f5c05 replace the non-working check to see if another wm is running with a 
method that actually works.  checking for icccm compliant wm's should
also be done first, but that's another diff (noted by oga).

ok oga@
 2011-06-24 05:58:51 +00:00
okan
c1530aea4c more nitems usage. 
ok oga@
 2011-06-24 05:54:30 +00:00
okan
2f0f43df32 re-order sweep draw so that we map into the client window after 
re-parenting; from Sviatoslav Chagaev.

ok oga@
 2011-06-24 05:51:25 +00:00
okan
74252c7d0a struct XftFont already has height which we can use directly instead of 
calculating ourselves, so do so.

ok oga@
 2011-06-24 05:45:57 +00:00
okan
08f0ea6df6 alter a few function returns and prototypes; found by lint. 
ok oga@
 2011-06-24 05:40:09 +00:00
okan
cfdfe3cdd9 Correct extern declaration and while here, rename a variable to be 
pedantic.

from Thomas Pfaff.

ok oga@
 2011-06-24 05:33:41 +00:00
okan
209974b036 collapse client and group {r,}cycle defines since they are really 
the same thing.

ok oga@
 2011-06-24 05:30:42 +00:00
naddy
2e88a2b0e8 switch to installing source manuals: 
* cope with new bsd.man.mk
* update imake configuration

ports use of imake remains unchanged
 2011-06-23 22:48:59 +00:00
okan
3d9ed32226 fix botched client and group cycle defines; noticed by Thomas Pfaff. 
"no cookie! fix it" - oga@
 2011-05-15 17:58:47 +00:00
okan
dc3d407467 remove left over XSync; ok oga@ 2011-05-13 12:53:19 +00:00
okan
4fb00eca7b tag and comment cleanup; ok oga@ 2011-05-11 13:53:51 +00:00
okan
b1f11d8dc6 introduce a new 'freeze' flag (CMS-f by default) which may be applied to 
any window, after which all move/resize requests will be ignored,
essentially freezing the window in place.

there's a possibility to merge this with the 'ignore' concept, pending
on how ignore+freeze should behave (really more ewmh stuff), but punting
for now since ponies are on the line.

requested and tested by thib at k2k11 with ponies, unicorns and rainbows.

'save the unicorns' todd@, ok oga@
 2011-05-07 17:15:37 +00:00