Importing font-bh-100dpi 1.0.0

font/bh-100dpi/COPYING

@@ -0,0 +1,58 @@
+This is the LEGAL NOTICE pertaining to the Lucida fonts from Bigelow & Holmes:
+
+	NOTICE TO USER: The source code, including the glyphs or icons 
+	forming a par of the OPEN LOOK TM Graphic User Interface, on this 
+	tape and in these files is copyrighted under U.S. and international
+	laws. Sun Microsystems, Inc. of Mountain View, California owns
+	the copyright and has design patents pending on many of the icons. 
+	AT&T is the owner of the OPEN LOOK trademark associated with the
+	materials on this tape. Users and possessors of this source code 
+	are hereby granted a nonexclusive, royalty-free copyright and 
+	design patent license to use this code in individual and 
+	commercial software. A royalty-free, nonexclusive trademark
+	license to refer to the code and output as "OPEN LOOK" compatible 
+	is available from AT&T if, and only if, the appearance of the 
+	icons or glyphs is not changed in any manner except as absolutely
+	necessary to accommodate the standard resolution of the screen or
+	other output device, the code and output is not changed except as 
+	authorized herein, and the code and output is validated by AT&T. 
+	Bigelow & Holmes is the owner of the Lucida (R) trademark for the
+	fonts and bit-mapped images associated with the materials on this 
+	tape. Users are granted a royalty-free, nonexclusive license to use
+	the trademark only to identify the fonts and bit-mapped images if, 
+	and only if, the fonts and bit-mapped images are not modified in any
+	way by the user. 
+
+
+	Any use of this source code must include, in the user documentation 
+	and internal comments to the code, notices to the end user as  
+	follows:
+
+
+	(c) Copyright 1989 Sun Microsystems, Inc. Sun design patents
+	pending in the U.S. and foreign countries. OPEN LOOK is a 
+	trademark of AT&T. Used by written permission of the owners.
+
+
+ 	(c) Copyright Bigelow & Holmes 1986, 1985. Lucida is a registered 
+	trademark of Bigelow & Holmes. Permission to use the Lucida 
+	trademark is hereby granted only in association with the images 
+	and fonts described in this file.
+
+
+
+	SUN MICROSYSTEMS, INC., AT&T, AND BIGELOW & HOLMES 
+	MAKE NO REPRESENTATIONS ABOUT THE SUITABILITY OF
+ 	THIS SOURCE CODE FOR ANY PURPOSE. IT IS PROVIDED "AS IS" 
+	WITHOUT EXPRESS OR IMPLIED WARRANTY OF ANY KIND. 
+	SUN  MICROSYSTEMS, INC., AT&T AND BIGELOW  & HOLMES, 
+	SEVERALLY AND INDIVIDUALLY, DISCLAIM ALL WARRANTIES 
+	WITH REGARD TO THIS SOURCE CODE, INCLUDING ALL IMPLIED
+	WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+	PARTICULAR PURPOSE. IN NO EVENT SHALL SUN MICROSYSTEMS,
+	INC., AT&T OR BIGELOW & HOLMES BE LIABLE FOR ANY
+	SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
+	OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA 	
+	OR PROFITS, WHETHER IN AN ACTION OF  CONTRACT, NEGLIGENCE
+	OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+	WITH THE USE OR PERFORMANCE OF THIS SOURCE CODE.

font/bh-100dpi/ChangeLog

@@ -0,0 +1,33 @@
+2005-12-14  Kevin E. Martin  <kem-at-freedesktop-dot-org>
+
+	* configure.ac:
+	Update package version number for final X11R7 release candidate.
+
+2005-12-03  Kevin E. Martin  <kem-at-freedesktop-dot-org>
+
+	* configure.ac:
+	Add m4 magic to allow AS_HELP_STRING to work with older versions
+	of autoconf 2.57.
+
+2005-12-03  Kevin E. Martin  <kem-at-freedesktop-dot-org>
+
+	* configure.ac:
+	Update package version number for X11R7 RC3 release.
+
+2005-11-23  Eric Anholt  <anholt@FreeBSD.org>
+
+	* Makefile.am:
+	Use $< instead of $^ to be portable to FreeBSD's make.
+
+2005-11-15  Kevin E. Martin  <kem-at-freedesktop-dot-org>
+
+	* Makefile.am:
+	* configure.ac:
+	Add configure options to change the installed font dir and
+	disable ISO8859-* fonts.
+
+2005-10-18  Kevin E. Martin  <kem-at-freedesktop-dot-org>
+
+	* configure.ac:
+	Update package version number for RC1 release.
+

font/bh-100dpi/LU_LEGALNOTICE

@@ -0,0 +1,58 @@
+This is the LEGAL NOTICE pertaining to the Lucida fonts from Bigelow & Holmes:
+
+	NOTICE TO USER: The source code, including the glyphs or icons 
+	forming a par of the OPEN LOOK TM Graphic User Interface, on this 
+	tape and in these files is copyrighted under U.S. and international
+	laws. Sun Microsystems, Inc. of Mountain View, California owns
+	the copyright and has design patents pending on many of the icons. 
+	AT&T is the owner of the OPEN LOOK trademark associated with the
+	materials on this tape. Users and possessors of this source code 
+	are hereby granted a nonexclusive, royalty-free copyright and 
+	design patent license to use this code in individual and 
+	commercial software. A royalty-free, nonexclusive trademark
+	license to refer to the code and output as "OPEN LOOK" compatible 
+	is available from AT&T if, and only if, the appearance of the 
+	icons or glyphs is not changed in any manner except as absolutely
+	necessary to accommodate the standard resolution of the screen or
+	other output device, the code and output is not changed except as 
+	authorized herein, and the code and output is validated by AT&T. 
+	Bigelow & Holmes is the owner of the Lucida (R) trademark for the
+	fonts and bit-mapped images associated with the materials on this 
+	tape. Users are granted a royalty-free, nonexclusive license to use
+	the trademark only to identify the fonts and bit-mapped images if, 
+	and only if, the fonts and bit-mapped images are not modified in any
+	way by the user. 
+
+
+	Any use of this source code must include, in the user documentation 
+	and internal comments to the code, notices to the end user as  
+	follows:
+
+
+	(c) Copyright 1989 Sun Microsystems, Inc. Sun design patents
+	pending in the U.S. and foreign countries. OPEN LOOK is a 
+	trademark of AT&T. Used by written permission of the owners.
+
+
+ 	(c) Copyright Bigelow & Holmes 1986, 1985. Lucida is a registered 
+	trademark of Bigelow & Holmes. Permission to use the Lucida 
+	trademark is hereby granted only in association with the images 
+	and fonts described in this file.
+
+
+
+	SUN MICROSYSTEMS, INC., AT&T, AND BIGELOW & HOLMES 
+	MAKE NO REPRESENTATIONS ABOUT THE SUITABILITY OF
+ 	THIS SOURCE CODE FOR ANY PURPOSE. IT IS PROVIDED "AS IS" 
+	WITHOUT EXPRESS OR IMPLIED WARRANTY OF ANY KIND. 
+	SUN  MICROSYSTEMS, INC., AT&T AND BIGELOW  & HOLMES, 
+	SEVERALLY AND INDIVIDUALLY, DISCLAIM ALL WARRANTIES 
+	WITH REGARD TO THIS SOURCE CODE, INCLUDING ALL IMPLIED
+	WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+	PARTICULAR PURPOSE. IN NO EVENT SHALL SUN MICROSYSTEMS,
+	INC., AT&T OR BIGELOW & HOLMES BE LIABLE FOR ANY
+	SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
+	OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA 	
+	OR PROFITS, WHETHER IN AN ACTION OF  CONTRACT, NEGLIGENCE
+	OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+	WITH THE USE OR PERFORMANCE OF THIS SOURCE CODE.

font/bh-100dpi/Makefile.am

@@ -0,0 +1,217 @@
+#  Copyright 2005 Red Hat, Inc.
+#
+#  Permission to use, copy, modify, distribute, and sell this software
+#  and its documentation for any purpose is hereby granted without
+#  fee, provided that the above copyright notice appear in all copies
+#  and that both that copyright notice and this permission notice
+#  appear in supporting documentation, and that the name of Red Hat
+#  not be used in advertising or publicity pertaining to distribution
+#  of the software without specific, written prior permission.  Red
+#  Hat makes no representations about the suitability of this software
+#  for any purpose.  It is provided "as is" without express or implied
+#  warranty.
+#
+#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN
+#  NO EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
+#  OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+#  NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+#  CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+BDF2UCS_FONT_FILES = \
+	lubB08 \
+	lubB10 \
+	lubB12 \
+	lubB14 \
+	lubB18 \
+	lubB19 \
+	lubB24 \
+	lubBI08 \
+	lubBI10 \
+	lubBI12 \
+	lubBI14 \
+	lubBI18 \
+	lubBI19 \
+	lubBI24 \
+	lubI08 \
+	lubI10 \
+	lubI12 \
+	lubI14 \
+	lubI18 \
+	lubI19 \
+	lubI24 \
+	luBIS08 \
+	luBIS10 \
+	luBIS12 \
+	luBIS14 \
+	luBIS18 \
+	luBIS19 \
+	luBIS24 \
+	lubR08 \
+	lubR10 \
+	lubR12 \
+	lubR14 \
+	lubR18 \
+	lubR19 \
+	lubR24 \
+	luBS08 \
+	luBS10 \
+	luBS12 \
+	luBS14 \
+	luBS18 \
+	luBS19 \
+	luBS24 \
+	luIS08 \
+	luIS10 \
+	luIS12 \
+	luIS14 \
+	luIS18 \
+	luIS19 \
+	luIS24 \
+	luRS08 \
+	luRS10 \
+	luRS12 \
+	luRS14 \
+	luRS18 \
+	luRS19 \
+	luRS24
+FONT_FILES = $(BDF2UCS_FONT_FILES)
+
+BDF_FILES = $(FONT_FILES:%=%.bdf)
+PCF_FILES = $(FONT_FILES:%=%.pcf.gz)
+
+if ISO8859_1
+ISO8859_1_BDF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-1.bdf)
+ISO8859_1_PCF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-1.pcf.gz)
+endif
+
+if ISO8859_2
+ISO8859_2_BDF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-2.bdf)
+ISO8859_2_PCF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-2.pcf.gz)
+endif
+
+if ISO8859_3
+ISO8859_3_BDF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-3.bdf)
+ISO8859_3_PCF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-3.pcf.gz)
+endif
+
+if ISO8859_4
+ISO8859_4_BDF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-4.bdf)
+ISO8859_4_PCF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-4.pcf.gz)
+endif
+
+if ISO8859_9
+ISO8859_9_BDF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-9.bdf)
+ISO8859_9_PCF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-9.pcf.gz)
+endif
+
+if ISO8859_10
+ISO8859_10_BDF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-10.bdf)
+ISO8859_10_PCF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-10.pcf.gz)
+endif
+
+if ISO8859_13
+ISO8859_13_BDF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-13.bdf)
+ISO8859_13_PCF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-13.pcf.gz)
+endif
+
+if ISO8859_14
+ISO8859_14_BDF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-14.bdf)
+ISO8859_14_PCF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-14.pcf.gz)
+endif
+
+if ISO8859_15
+ISO8859_15_BDF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-15.bdf)
+ISO8859_15_PCF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-15.pcf.gz)
+endif
+
+UTIL_DIR = @MAPFILES_PATH@
+
+SUFFIXES = .bdf .pcf.gz \
+	-ISO8859-1.bdf \
+	-ISO8859-2.bdf \
+	-ISO8859-3.bdf \
+	-ISO8859-4.bdf \
+	-ISO8859-9.bdf \
+	-ISO8859-10.bdf \
+	-ISO8859-13.bdf \
+	-ISO8859-14.bdf \
+	-ISO8859-15.bdf
+
+.bdf.pcf.gz:
+	@rm -f $@
+	$(BDFTOPCF) -t $< | gzip > $@
+
+.bdf-ISO8859-1.bdf:
+	@rm -f $@
+	$(UCS2ANY) $< $(UTIL_DIR)/map-ISO8859-1 ISO8859-1
+
+.bdf-ISO8859-2.bdf:
+	@rm -f $@
+	$(UCS2ANY) $< $(UTIL_DIR)/map-ISO8859-2 ISO8859-2
+
+.bdf-ISO8859-3.bdf:
+	@rm -f $@
+	$(UCS2ANY) $< $(UTIL_DIR)/map-ISO8859-3 ISO8859-3
+
+.bdf-ISO8859-4.bdf:
+	@rm -f $@
+	$(UCS2ANY) $< $(UTIL_DIR)/map-ISO8859-4 ISO8859-4
+
+.bdf-ISO8859-9.bdf:
+	@rm -f $@
+	$(UCS2ANY) $< $(UTIL_DIR)/map-ISO8859-9 ISO8859-9
+
+.bdf-ISO8859-10.bdf:
+	@rm -f $@
+	$(UCS2ANY) $< $(UTIL_DIR)/map-ISO8859-10 ISO8859-10
+
+.bdf-ISO8859-13.bdf:
+	@rm -f $@
+	$(UCS2ANY) $< $(UTIL_DIR)/map-ISO8859-13 ISO8859-13
+
+.bdf-ISO8859-14.bdf:
+	@rm -f $@
+	$(UCS2ANY) $< $(UTIL_DIR)/map-ISO8859-14 ISO8859-14
+
+.bdf-ISO8859-15.bdf:
+	@rm -f $@
+	$(UCS2ANY) $< $(UTIL_DIR)/map-ISO8859-15 ISO8859-15
+
+fontdir = @FONTDIR@
+font_DATA = \
+	$(PCF_FILES) \
+	$(ISO8859_1_PCF_FILES) \
+	$(ISO8859_2_PCF_FILES) \
+	$(ISO8859_3_PCF_FILES) \
+	$(ISO8859_4_PCF_FILES) \
+	$(ISO8859_9_PCF_FILES) \
+	$(ISO8859_10_PCF_FILES) \
+	$(ISO8859_13_PCF_FILES) \
+	$(ISO8859_14_PCF_FILES) \
+	$(ISO8859_15_PCF_FILES)
+BUILT_BDF_FILES = \
+	$(ISO8859_1_BDF_FILES) \
+	$(ISO8859_2_BDF_FILES) \
+	$(ISO8859_3_BDF_FILES) \
+	$(ISO8859_4_BDF_FILES) \
+	$(ISO8859_9_BDF_FILES) \
+	$(ISO8859_10_BDF_FILES) \
+	$(ISO8859_13_BDF_FILES) \
+	$(ISO8859_14_BDF_FILES) \
+	$(ISO8859_15_BDF_FILES)
+CLEANFILES = $(font_DATA) $(BUILT_BDF_FILES)
+
+EXTRA_DIST = $(BDF_FILES) LU_LEGALNOTICE autogen.sh
+
+all-local: $(BUILT_BDF_FILES) $(font_DATA)
+
+install-data-hook:
+	@rm -f $(DESTDIR)$(fontdir)/fonts.scale
+	$(MKFONTSCALE) $(DESTDIR)$(fontdir)
+	@rm -f $(DESTDIR)$(fontdir)/font.dir
+	$(MKFONTDIR) $(DESTDIR)$(fontdir)
+
+distuninstallcheck:
+	@:

font/bh-100dpi/Makefile.in

@@ -0,0 +1,580 @@
+# Makefile.in generated by automake 1.7.9 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#  Copyright 2005 Red Hat, Inc.
+#
+#  Permission to use, copy, modify, distribute, and sell this software
+#  and its documentation for any purpose is hereby granted without
+#  fee, provided that the above copyright notice appear in all copies
+#  and that both that copyright notice and this permission notice
+#  appear in supporting documentation, and that the name of Red Hat
+#  not be used in advertising or publicity pertaining to distribution
+#  of the software without specific, written prior permission.  Red
+#  Hat makes no representations about the suitability of this software
+#  for any purpose.  It is provided "as is" without express or implied
+#  warranty.
+#
+#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN
+#  NO EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
+#  OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+#  NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+#  CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = .
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BDFTOPCF = @BDFTOPCF@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+FONTDIR = @FONTDIR@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+ISO8859_10_FALSE = @ISO8859_10_FALSE@
+ISO8859_10_TRUE = @ISO8859_10_TRUE@
+ISO8859_13_FALSE = @ISO8859_13_FALSE@
+ISO8859_13_TRUE = @ISO8859_13_TRUE@
+ISO8859_14_FALSE = @ISO8859_14_FALSE@
+ISO8859_14_TRUE = @ISO8859_14_TRUE@
+ISO8859_15_FALSE = @ISO8859_15_FALSE@
+ISO8859_15_TRUE = @ISO8859_15_TRUE@
+ISO8859_1_FALSE = @ISO8859_1_FALSE@
+ISO8859_1_TRUE = @ISO8859_1_TRUE@
+ISO8859_2_FALSE = @ISO8859_2_FALSE@
+ISO8859_2_TRUE = @ISO8859_2_TRUE@
+ISO8859_3_FALSE = @ISO8859_3_FALSE@
+ISO8859_3_TRUE = @ISO8859_3_TRUE@
+ISO8859_4_FALSE = @ISO8859_4_FALSE@
+ISO8859_4_TRUE = @ISO8859_4_TRUE@
+ISO8859_9_FALSE = @ISO8859_9_FALSE@
+ISO8859_9_TRUE = @ISO8859_9_TRUE@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+MAPFILES_PATH = @MAPFILES_PATH@
+MAPS_CFLAGS = @MAPS_CFLAGS@
+MAPS_LIBS = @MAPS_LIBS@
+MKFONTDIR = @MKFONTDIR@
+MKFONTSCALE = @MKFONTSCALE@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+UCS2ANY = @UCS2ANY@
+VERSION = @VERSION@
+ac_ct_STRIP = @ac_ct_STRIP@
+ac_pt_PKG_CONFIG = @ac_pt_PKG_CONFIG@
+am__leading_dot = @am__leading_dot@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+
+BDF2UCS_FONT_FILES = \
+	lubB08 \
+	lubB10 \
+	lubB12 \
+	lubB14 \
+	lubB18 \
+	lubB19 \
+	lubB24 \
+	lubBI08 \
+	lubBI10 \
+	lubBI12 \
+	lubBI14 \
+	lubBI18 \
+	lubBI19 \
+	lubBI24 \
+	lubI08 \
+	lubI10 \
+	lubI12 \
+	lubI14 \
+	lubI18 \
+	lubI19 \
+	lubI24 \
+	luBIS08 \
+	luBIS10 \
+	luBIS12 \
+	luBIS14 \
+	luBIS18 \
+	luBIS19 \
+	luBIS24 \
+	lubR08 \
+	lubR10 \
+	lubR12 \
+	lubR14 \
+	lubR18 \
+	lubR19 \
+	lubR24 \
+	luBS08 \
+	luBS10 \
+	luBS12 \
+	luBS14 \
+	luBS18 \
+	luBS19 \
+	luBS24 \
+	luIS08 \
+	luIS10 \
+	luIS12 \
+	luIS14 \
+	luIS18 \
+	luIS19 \
+	luIS24 \
+	luRS08 \
+	luRS10 \
+	luRS12 \
+	luRS14 \
+	luRS18 \
+	luRS19 \
+	luRS24
+
+FONT_FILES = $(BDF2UCS_FONT_FILES)
+
+BDF_FILES = $(FONT_FILES:%=%.bdf)
+PCF_FILES = $(FONT_FILES:%=%.pcf.gz)
+
+@ISO8859_1_TRUE@ISO8859_1_BDF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-1.bdf)
+@ISO8859_1_TRUE@ISO8859_1_PCF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-1.pcf.gz)
+
+@ISO8859_2_TRUE@ISO8859_2_BDF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-2.bdf)
+@ISO8859_2_TRUE@ISO8859_2_PCF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-2.pcf.gz)
+
+@ISO8859_3_TRUE@ISO8859_3_BDF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-3.bdf)
+@ISO8859_3_TRUE@ISO8859_3_PCF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-3.pcf.gz)
+
+@ISO8859_4_TRUE@ISO8859_4_BDF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-4.bdf)
+@ISO8859_4_TRUE@ISO8859_4_PCF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-4.pcf.gz)
+
+@ISO8859_9_TRUE@ISO8859_9_BDF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-9.bdf)
+@ISO8859_9_TRUE@ISO8859_9_PCF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-9.pcf.gz)
+
+@ISO8859_10_TRUE@ISO8859_10_BDF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-10.bdf)
+@ISO8859_10_TRUE@ISO8859_10_PCF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-10.pcf.gz)
+
+@ISO8859_13_TRUE@ISO8859_13_BDF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-13.bdf)
+@ISO8859_13_TRUE@ISO8859_13_PCF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-13.pcf.gz)
+
+@ISO8859_14_TRUE@ISO8859_14_BDF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-14.bdf)
+@ISO8859_14_TRUE@ISO8859_14_PCF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-14.pcf.gz)
+
+@ISO8859_15_TRUE@ISO8859_15_BDF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-15.bdf)
+@ISO8859_15_TRUE@ISO8859_15_PCF_FILES = $(BDF2UCS_FONT_FILES:%=%-ISO8859-15.pcf.gz)
+
+UTIL_DIR = @MAPFILES_PATH@
+
+SUFFIXES = .bdf .pcf.gz \
+	-ISO8859-1.bdf \
+	-ISO8859-2.bdf \
+	-ISO8859-3.bdf \
+	-ISO8859-4.bdf \
+	-ISO8859-9.bdf \
+	-ISO8859-10.bdf \
+	-ISO8859-13.bdf \
+	-ISO8859-14.bdf \
+	-ISO8859-15.bdf
+
+
+fontdir = @FONTDIR@
+font_DATA = \
+	$(PCF_FILES) \
+	$(ISO8859_1_PCF_FILES) \
+	$(ISO8859_2_PCF_FILES) \
+	$(ISO8859_3_PCF_FILES) \
+	$(ISO8859_4_PCF_FILES) \
+	$(ISO8859_9_PCF_FILES) \
+	$(ISO8859_10_PCF_FILES) \
+	$(ISO8859_13_PCF_FILES) \
+	$(ISO8859_14_PCF_FILES) \
+	$(ISO8859_15_PCF_FILES)
+
+BUILT_BDF_FILES = \
+	$(ISO8859_1_BDF_FILES) \
+	$(ISO8859_2_BDF_FILES) \
+	$(ISO8859_3_BDF_FILES) \
+	$(ISO8859_4_BDF_FILES) \
+	$(ISO8859_9_BDF_FILES) \
+	$(ISO8859_10_BDF_FILES) \
+	$(ISO8859_13_BDF_FILES) \
+	$(ISO8859_14_BDF_FILES) \
+	$(ISO8859_15_BDF_FILES)
+
+CLEANFILES = $(font_DATA) $(BUILT_BDF_FILES)
+
+EXTRA_DIST = $(BDF_FILES) LU_LEGALNOTICE autogen.sh
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+DATA = $(font_DATA)
+
+DIST_COMMON = README $(srcdir)/Makefile.in $(srcdir)/configure AUTHORS \
+	COPYING ChangeLog INSTALL Makefile.am NEWS aclocal.m4 configure \
+	configure.ac install-sh missing mkinstalldirs
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .bdf .pcf.gz -ISO8859-1.bdf -ISO8859-2.bdf -ISO8859-3.bdf -ISO8859-4.bdf -ISO8859-9.bdf -ISO8859-10.bdf -ISO8859-13.bdf -ISO8859-14.bdf -ISO8859-15.bdf
+
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am  $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  Makefile
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)
+
+$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+$(srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(srcdir)/configure.ac $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+	cd $(srcdir) && $(AUTOCONF)
+
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.ac 
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+uninstall-info-am:
+fontDATA_INSTALL = $(INSTALL_DATA)
+install-fontDATA: $(font_DATA)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(fontdir)
+	@list='$(font_DATA)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(fontDATA_INSTALL) $$d$$p $(DESTDIR)$(fontdir)/$$f"; \
+	  $(fontDATA_INSTALL) $$d$$p $(DESTDIR)$(fontdir)/$$f; \
+	done
+
+uninstall-fontDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(font_DATA)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f $(DESTDIR)$(fontdir)/$$f"; \
+	  rm -f $(DESTDIR)$(fontdir)/$$f; \
+	done
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = .
+distdir = $(PACKAGE)-$(VERSION)
+
+am__remove_distdir = \
+  { test ! -d $(distdir) \
+    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr $(distdir); }; }
+
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+
+distdir: $(DISTFILES)
+	$(am__remove_distdir)
+	mkdir $(distdir)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkinstalldirs) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r $(distdir)
+dist-gzip: distdir
+	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+dist-bzip2: distdir
+	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist dist-all: distdir
+	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	$(am__remove_distdir)
+	GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/_build
+	mkdir $(distdir)/_inst
+	chmod a-w $(distdir)
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && cd $(distdir)/_build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && $(mkinstalldirs) "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
+	  && rm -f $(distdir).tar.gz \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+	$(am__remove_distdir)
+	@echo "$(distdir).tar.gz is ready for distribution" | \
+	  sed 'h;s/./=/g;p;x;p;x'
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+check: check-am
+all-am: Makefile $(DATA) all-local
+
+installdirs:
+	$(mkinstalldirs) $(DESTDIR)$(fontdir)
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-fontDATA
+	@$(NORMAL_INSTALL)
+	$(MAKE) $(AM_MAKEFLAGS) install-data-hook
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-fontDATA uninstall-info-am
+
+.PHONY: all all-am all-local check check-am clean clean-generic dist \
+	dist-all dist-bzip2 dist-gzip distcheck distclean \
+	distclean-generic distcleancheck distdir distuninstallcheck dvi \
+	dvi-am info info-am install install-am install-data \
+	install-data-am install-exec install-exec-am install-fontDATA \
+	install-info install-info-am install-man install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+	pdf-am ps ps-am uninstall uninstall-am uninstall-fontDATA \
+	uninstall-info-am
+
+
+.bdf.pcf.gz:
+	@rm -f $@
+	$(BDFTOPCF) -t $< | gzip > $@
+
+.bdf-ISO8859-1.bdf:
+	@rm -f $@
+	$(UCS2ANY) $< $(UTIL_DIR)/map-ISO8859-1 ISO8859-1
+
+.bdf-ISO8859-2.bdf:
+	@rm -f $@
+	$(UCS2ANY) $< $(UTIL_DIR)/map-ISO8859-2 ISO8859-2
+
+.bdf-ISO8859-3.bdf:
+	@rm -f $@
+	$(UCS2ANY) $< $(UTIL_DIR)/map-ISO8859-3 ISO8859-3
+
+.bdf-ISO8859-4.bdf:
+	@rm -f $@
+	$(UCS2ANY) $< $(UTIL_DIR)/map-ISO8859-4 ISO8859-4
+
+.bdf-ISO8859-9.bdf:
+	@rm -f $@
+	$(UCS2ANY) $< $(UTIL_DIR)/map-ISO8859-9 ISO8859-9
+
+.bdf-ISO8859-10.bdf:
+	@rm -f $@
+	$(UCS2ANY) $< $(UTIL_DIR)/map-ISO8859-10 ISO8859-10
+
+.bdf-ISO8859-13.bdf:
+	@rm -f $@
+	$(UCS2ANY) $< $(UTIL_DIR)/map-ISO8859-13 ISO8859-13
+
+.bdf-ISO8859-14.bdf:
+	@rm -f $@
+	$(UCS2ANY) $< $(UTIL_DIR)/map-ISO8859-14 ISO8859-14
+
+.bdf-ISO8859-15.bdf:
+	@rm -f $@
+	$(UCS2ANY) $< $(UTIL_DIR)/map-ISO8859-15 ISO8859-15
+
+all-local: $(BUILT_BDF_FILES) $(font_DATA)
+
+install-data-hook:
+	@rm -f $(DESTDIR)$(fontdir)/fonts.scale
+	$(MKFONTSCALE) $(DESTDIR)$(fontdir)
+	@rm -f $(DESTDIR)$(fontdir)/font.dir
+	$(MKFONTDIR) $(DESTDIR)$(fontdir)
+
+distuninstallcheck:
+	@:
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

font/bh-100dpi/autogen.sh

@@ -0,0 +1,12 @@
+#! /bin/sh
+
+srcdir=`dirname $0`
+test -z "$srcdir" && srcdir=.
+
+ORIGDIR=`pwd`
+cd $srcdir
+
+autoreconf -v --install || exit 1
+cd $ORIGDIR || exit $?
+
+$srcdir/configure --enable-maintainer-mode "$@"

font/bh-100dpi/configure.ac

@@ -0,0 +1,61 @@
+dnl  Copyright 2005 Red Hat, Inc.
+dnl
+dnl  Permission to use, copy, modify, distribute, and sell this software
+dnl  and its documentation for any purpose is hereby granted without
+dnl  fee, provided that the above copyright notice appear in all copies
+dnl  and that both that copyright notice and this permission notice
+dnl  appear in supporting documentation, and that the name of Red Hat
+dnl  not be used in advertising or publicity pertaining to distribution
+dnl  of the software without specific, written prior permission.  Red
+dnl  Hat makes no representations about the suitability of this software
+dnl  for any purpose.  It is provided "as is" without express or implied
+dnl  warranty.
+dnl
+dnl  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+dnl  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN
+dnl  NO EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+dnl  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
+dnl  OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+dnl  NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+dnl  CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+dnl
+dnl Process this file with autoconf to create configure.
+
+AC_PREREQ([2.57])
+AC_INIT(font-bh-100dpi, [1.0.0], [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg], font-bh-100dpi)
+AM_INIT_AUTOMAKE([foreign dist-bzip2])
+AM_MAINTAINER_MODE
+
+AC_PROG_INSTALL
+
+AC_PATH_PROG(BDFTOPCF, bdftopcf)
+AC_PATH_PROG(UCS2ANY, ucs2any)
+AC_PATH_PROG(MKFONTSCALE, mkfontscale)
+AC_PATH_PROG(MKFONTDIR, mkfontdir)
+
+m4_ifdef([AS_HELP_STRING], , [m4_define([AS_HELP_STRING], m4_defn([AC_HELP_STRING]))])
+
+DEFAULT_FONTDIR=${libdir}/X11/fonts/100dpi
+AC_ARG_WITH(fontdir,
+	AS_HELP_STRING([--with-fontdir=FONTDIR], [Path to install fonts]),
+	[FONTDIR="$withval"],
+	[FONTDIR="$DEFAULT_FONTDIR"])
+AC_SUBST(FONTDIR)
+
+PKG_CHECK_MODULES(MAPS, [fontutil])
+MAPFILES_PATH=$(pkg-config --variable=mapdir fontutil)
+AC_SUBST(MAPFILES_PATH)
+
+XORG_FONT_CHECK_ISO8859_1
+XORG_FONT_CHECK_ISO8859_2
+XORG_FONT_CHECK_ISO8859_3
+XORG_FONT_CHECK_ISO8859_4
+XORG_FONT_CHECK_ISO8859_9
+XORG_FONT_CHECK_ISO8859_10
+XORG_FONT_CHECK_ISO8859_13
+XORG_FONT_CHECK_ISO8859_14
+XORG_FONT_CHECK_ISO8859_15
+
+XORG_RELEASE_VERSION
+
+AC_OUTPUT([Makefile])

font/bh-100dpi/install-sh

@@ -0,0 +1,294 @@
+#!/bin/sh
+#
+# install - install a program, script, or datafile
+#
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+	-c) instcmd=$cpprog
+	    shift
+	    continue;;
+
+	-d) dir_arg=true
+	    shift
+	    continue;;
+
+	-m) chmodcmd="$chmodprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-o) chowncmd="$chownprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-g) chgrpcmd="$chgrpprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-s) stripcmd=$stripprog
+	    shift
+	    continue;;
+
+	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
+	    shift
+	    continue;;
+
+	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+	    shift
+	    continue;;
+
+	*)  if [ x"$src" = x ]
+	    then
+		src=$1
+	    else
+		# this colon is to work around a 386BSD /bin/sh bug
+		:
+		dst=$1
+	    fi
+	    shift
+	    continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+	echo "$0: no input file specified" >&2
+	exit 1
+else
+	:
+fi
+
+if [ x"$dir_arg" != x ]; then
+	dst=$src
+	src=""
+
+	if [ -d "$dst" ]; then
+		instcmd=:
+		chmodcmd=""
+	else
+		instcmd=$mkdirprog
+	fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad
+# if $src (and thus $dsttmp) contains '*'.
+
+	if [ -f "$src" ] || [ -d "$src" ]
+	then
+		:
+	else
+		echo "$0: $src does not exist" >&2
+		exit 1
+	fi
+
+	if [ x"$dst" = x ]
+	then
+		echo "$0: no destination specified" >&2
+		exit 1
+	else
+		:
+	fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+	if [ -d "$dst" ]
+	then
+		dst=$dst/`basename "$src"`
+	else
+		:
+	fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='
+	'
+IFS="${IFS-$defaultIFS}"
+
+oIFS=$IFS
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS=$oIFS
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+	pathcomp=$pathcomp$1
+	shift
+
+	if [ ! -d "$pathcomp" ] ;
+        then
+		$mkdirprog "$pathcomp"
+	else
+		:
+	fi
+
+	pathcomp=$pathcomp/
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+	$doit $instcmd "$dst" &&
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+	if [ x"$transformarg" = x ]
+	then
+		dstfile=`basename "$dst"`
+	else
+		dstfile=`basename "$dst" $transformbasename |
+			sed $transformarg`$transformbasename
+	fi
+
+# don't allow the sed command to completely eliminate the filename
+
+	if [ x"$dstfile" = x ]
+	then
+		dstfile=`basename "$dst"`
+	else
+		:
+	fi
+
+# Make a couple of temp file names in the proper directory.
+
+	dsttmp=$dstdir/_inst.$$_
+	rmtmp=$dstdir/_rm.$$_
+
+# Trap to clean up temp files at exit.
+
+	trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
+	trap '(exit $?); exit' 1 2 13 15
+
+# Move or copy the file name to the temp name
+
+	$doit $instcmd "$src" "$dsttmp" &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
+
+# Now remove or move aside any old file at destination location.  We try this
+# two ways since rm can't unlink itself on some systems and the destination
+# file might be busy for other reasons.  In this case, the final cleanup
+# might fail but the new file should still install successfully.
+
+{
+	if [ -f "$dstdir/$dstfile" ]
+	then
+		$doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
+		$doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
+		{
+		  echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+		  (exit 1); exit
+		}
+	else
+		:
+	fi
+} &&
+
+# Now rename the file to the real destination.
+
+	$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+
+fi &&
+
+# The final little trick to "correctly" pass the exit status to the exit trap.
+
+{
+	(exit 0); exit
+}

font/bh-100dpi/missing

@@ -0,0 +1,336 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try \`$0 --help' for more information"
+  exit 1
+fi
+
+run=:
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
+
+case "$1" in
+--run)
+  # Try to run requested program, and just exit if it succeeds.
+  run=
+  shift
+  "$@" && exit 0
+  ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+  aclocal      touch file \`aclocal.m4'
+  autoconf     touch file \`configure'
+  autoheader   touch file \`config.h.in'
+  automake     touch all \`Makefile.in' files
+  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
+  flex         create \`lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
+  lex          create \`lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  tar          try tar, gnutar, gtar, then tar without non-portable flags
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing 0.4 - GNU automake"
+    ;;
+
+  -*)
+    echo 1>&2 "$0: Unknown \`$1' option"
+    echo 1>&2 "Try \`$0 --help' for more information"
+    exit 1
+    ;;
+
+  aclocal*)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`${configure_ac}'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+    test -z "$files" && files="config.h"
+    touch_files=
+    for f in $files; do
+      case "$f" in
+      *:*) touch_files="$touch_files "`echo "$f" |
+				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+      *) touch_files="$touch_files $f.in";;
+      esac
+    done
+    touch $touch_files
+    ;;
+
+  automake*)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+         You might want to install the \`Automake' and \`Perl' packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print |
+	   sed 's/\.am$/.in/' |
+	   while read f; do touch "$f"; done
+    ;;
+
+  autom4te)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+         system.  You might have modified some files without having the
+         proper tools for further handling them.
+         You can get \`$1' as part of \`Autoconf' from any GNU
+         archive site."
+
+    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo "#! /bin/sh"
+	echo "# Created by GNU Automake missing as a replacement of"
+	echo "#  $ $@"
+	echo "exit 0"
+	chmod +x $file
+	exit 1
+    fi
+    ;;
+
+  bison|yacc)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.y' file.  You may need the \`Bison' package
+         in order for those modifications to take effect.  You can get
+         \`Bison' from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.y)
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.c
+	    fi
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.h
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f y.tab.h ]; then
+	echo >y.tab.h
+    fi
+    if [ ! -f y.tab.c ]; then
+	echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex|flex)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.l' file.  You may need the \`Flex' package
+         in order for those modifications to take effect.  You can get
+         \`Flex' from any GNU archive site."
+    rm -f lex.yy.c
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.l)
+	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" lex.yy.c
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f lex.yy.c ]; then
+	echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  help2man)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+	 you modified a dependency of a manual page.  You may need the
+	 \`Help2man' package in order for those modifications to take
+	 effect.  You can get \`Help2man' from any GNU archive site."
+
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+    fi
+    if [ -f "$file" ]; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo ".ab help2man is required to generate this page"
+	exit 1
+    fi
+    ;;
+
+  makeinfo)
+    if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
+       # We have makeinfo, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.texi' or \`.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy \`make' (AIX,
+         DU, IRIX).  You might want to install the \`Texinfo' package or
+         the \`GNU make' package.  Grab either from any GNU archive site."
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+    fi
+    touch $file
+    ;;
+
+  tar)
+    shift
+    if test -n "$run"; then
+      echo 1>&2 "ERROR: \`tar' requires --run"
+      exit 1
+    fi
+
+    # We have already tried tar in the generic part.
+    # Look for gnutar/gtar before invocation to avoid ugly error
+    # messages.
+    if (gnutar --version > /dev/null 2>&1); then
+       gnutar "$@" && exit 0
+    fi
+    if (gtar --version > /dev/null 2>&1); then
+       gtar "$@" && exit 0
+    fi
+    firstarg="$1"
+    if shift; then
+	case "$firstarg" in
+	*o*)
+	    firstarg=`echo "$firstarg" | sed s/o//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+	case "$firstarg" in
+	*h*)
+	    firstarg=`echo "$firstarg" | sed s/h//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+    fi
+
+    echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+         You may want to install GNU tar or Free paxutils, or check the
+         command line arguments."
+    exit 1
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+         system.  You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequisites for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0

font/bh-100dpi/mkinstalldirs

@@ -0,0 +1,111 @@
+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+# Author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain
+
+errstatus=0
+dirmode=""
+
+usage="\
+Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
+
+# process command line arguments
+while test $# -gt 0 ; do
+  case $1 in
+    -h | --help | --h*)         # -h for help
+      echo "$usage" 1>&2
+      exit 0
+      ;;
+    -m)                         # -m PERM arg
+      shift
+      test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
+      dirmode=$1
+      shift
+      ;;
+    --)                         # stop option processing
+      shift
+      break
+      ;;
+    -*)                         # unknown option
+      echo "$usage" 1>&2
+      exit 1
+      ;;
+    *)                          # first non-opt arg
+      break
+      ;;
+  esac
+done
+
+for file
+do
+  if test -d "$file"; then
+    shift
+  else
+    break
+  fi
+done
+
+case $# in
+  0) exit 0 ;;
+esac
+
+case $dirmode in
+  '')
+    if mkdir -p -- . 2>/dev/null; then
+      echo "mkdir -p -- $*"
+      exec mkdir -p -- "$@"
+    fi
+    ;;
+  *)
+    if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
+      echo "mkdir -m $dirmode -p -- $*"
+      exec mkdir -m "$dirmode" -p -- "$@"
+    fi
+    ;;
+esac
+
+for file
+do
+  set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+  shift
+
+  pathcomp=
+  for d
+  do
+    pathcomp="$pathcomp$d"
+    case $pathcomp in
+      -*) pathcomp=./$pathcomp ;;
+    esac
+
+    if test ! -d "$pathcomp"; then
+      echo "mkdir $pathcomp"
+
+      mkdir "$pathcomp" || lasterr=$?
+
+      if test ! -d "$pathcomp"; then
+  	errstatus=$lasterr
+      else
+  	if test ! -z "$dirmode"; then
+	  echo "chmod $dirmode $pathcomp"
+    	  lasterr=""
+  	  chmod "$dirmode" "$pathcomp" || lasterr=$?
+
+  	  if test ! -z "$lasterr"; then
+  	    errstatus=$lasterr
+  	  fi
+  	fi
+      fi
+    fi
+
+    pathcomp="$pathcomp/"
+  done
+done
+
+exit $errstatus
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# End:
+# mkinstalldirs ends here