2006-11-26 11:13:41 -07:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* This is a configuration program that will create a base XF86Config
|
|
|
|
|
* file based on menu choices. Its main feature is that clueless users
|
|
|
|
|
* may be less inclined to select crazy sync rates way over monitor spec,
|
|
|
|
|
* by presenting a menu with standard monitor types. Also some people
|
|
|
|
|
* don't read docs unless an executable that they can run tells them to.
|
|
|
|
|
*
|
|
|
|
|
* It assumes a 24-line or bigger text console.
|
|
|
|
|
*
|
|
|
|
|
* Revision history:
|
|
|
|
|
* 25Sep94 Initial version.
|
|
|
|
|
* 27Sep94 Fix hsync range of monitor types to match with best possible mode.
|
|
|
|
|
* Remove 'const'.
|
|
|
|
|
* Tweak descriptions.
|
|
|
|
|
* 28Sep94 Fixes from J"org Wunsch:
|
|
|
|
|
* Don't use gets().
|
|
|
|
|
* Add mouse device prompt.
|
|
|
|
|
* Fix lines overrun for 24-line console.
|
|
|
|
|
* Increase buffer size for probeonly output.
|
|
|
|
|
* 29Sep94 Fix bad bug with old XF86Config preserving during probeonly run.
|
|
|
|
|
* Add note about vertical refresh in interlaced modes.
|
|
|
|
|
* Name gets() replacement getstring().
|
|
|
|
|
* Add warning about binary paths.
|
|
|
|
|
* Fixes from David Dawes:
|
|
|
|
|
* Don't use 'ln -sf'.
|
|
|
|
|
* Omit man path reference in comment.
|
|
|
|
|
* Generate only a generic 320x200 SVGA section for accel cards.
|
|
|
|
|
* Only allow writing to /usr/X11R6/lib/X11 if root, and use
|
|
|
|
|
* -xf86config for the -probeonly phase (root only).
|
|
|
|
|
* Fix bug that forces screen type to accel in some cases.
|
|
|
|
|
* 30Sep94 Continue after clocks probe fails.
|
|
|
|
|
* Note about programmable clocks.
|
|
|
|
|
* Rename to 'xf86config'. Not to be confused with XF86Config
|
|
|
|
|
* or the -xf86config option.
|
|
|
|
|
* 07Oct94 Correct hsync in standard mode timings comments, and include
|
|
|
|
|
* the proper +/-h/vsync flags.
|
|
|
|
|
* 11Oct94 Skip 'numclocks:' and 'pixel clocks:' lines when probing for
|
|
|
|
|
* clocks.
|
|
|
|
|
* 18Oct94 Add check for existence of /usr/X11R6.
|
|
|
|
|
* Add note about ctrl-alt-backspace.
|
|
|
|
|
* 06Nov94 Add comment above standard mode timings in XF86Config.
|
|
|
|
|
* 24Dec94 Add low-resolution modes using doublescan.
|
|
|
|
|
* 29Dec94 Add note in horizontal sync range selection.
|
|
|
|
|
* Ask about ClearDTR/RTS option for Mouse Systems mice.
|
|
|
|
|
* Ask about writing to /etc/XF86Config.
|
|
|
|
|
* Allow link to be set in /var/X11R6/bin.
|
|
|
|
|
* Note about X -probeonly crashing.
|
|
|
|
|
* Add keyboard Alt binding option for non-ASCII characters.
|
|
|
|
|
* Add card database selection.
|
|
|
|
|
* Write temporary XF86Config for clock probing in /tmp instead
|
|
|
|
|
* of /usr/X11R6/lib/X11.
|
|
|
|
|
* Add RAMDAC and Clockchip menu.
|
|
|
|
|
* 27Mar99 Modified for XFree86 4.0 config file format
|
|
|
|
|
* 06Sep02 Write comment block about 'DontVTSwitch'.
|
|
|
|
|
*
|
|
|
|
|
* Possible enhancements:
|
|
|
|
|
* - Add more standard mode timings (also applies to README.Config). Missing
|
|
|
|
|
* are 1024x768 @ 72 Hz, 1152x900 modes, and 1280x1024 @ ~70 Hz.
|
|
|
|
|
* I suspect there is a VESA standard for 1024x768 @ 72 Hz with 77 MHz dot
|
|
|
|
|
* clock, and 1024x768 @ 75 Hz with 78.7 MHz dot clock. New types of
|
|
|
|
|
* monitors probably work better with VESA 75 Hz timings.
|
|
|
|
|
* - Add option for creation of clear, minimal XF86Config.
|
|
|
|
|
* - The card database doesn't include most of the entries in previous
|
|
|
|
|
* databases.
|
|
|
|
|
*
|
|
|
|
|
* Send comments to H.Hanemaayer@inter.nl.net.
|
|
|
|
|
*
|
|
|
|
|
* Things to keep up-to-date:
|
|
|
|
|
* - Accelerated server names.
|
|
|
|
|
* - Ramdac and Clockchip settings.
|
|
|
|
|
* - The card database.
|
|
|
|
|
*
|
|
|
|
|
*/
|
|
|
|
|
/* Oct2000
|
|
|
|
|
* New 'Configuration of XKB' section.
|
|
|
|
|
* Author: Ivan Pascal The XFree86 Project.
|
|
|
|
|
*/
|
|
|
|
|
/*
|
|
|
|
|
* Nov2002
|
|
|
|
|
* Some enhancements:
|
|
|
|
|
* - Add new PS/2 mouse protocol.
|
|
|
|
|
* "IMPS/2","ExplorerPS/2","ThinkingMousePS/2","MouseManPlusPS/2",
|
|
|
|
|
* "GlidePointPS/2","NetMousePS/2" and "NetScrollPS/2".
|
|
|
|
|
* - Add mouse-speed setting for PS/2 mouse.
|
|
|
|
|
* - Fix seg.fault problem on Solaris.
|
|
|
|
|
* - Add modestring "1400x1050"(for ATI Mobile-Rage).
|
|
|
|
|
* - Add videomemory 8192, 16384, 32768, 65536, 131072 and 262144.
|
|
|
|
|
* - Ready to DRI.
|
|
|
|
|
* - Load xtt module instead of freetype module.
|
|
|
|
|
* - Add font path "/TrueType/" and "/freefont/".
|
|
|
|
|
* Chisato Yamauchi(cyamauch@phyas.aichi-edu.ac.jp)
|
|
|
|
|
*/
|
|
|
|
|
/* $XConsortium: xf86config.c /main/21 1996/10/28 05:43:57 kaleb $ */
|
|
|
|
|
|
|
|
|
|
#ifdef HAVE_CONFIG_H
|
|
|
|
|
# include "xorg-server.h"
|
|
|
|
|
# include "xkb-config.h"
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#include <stdlib.h>
|
|
|
|
|
#include <stdio.h>
|
|
|
|
|
#include <ctype.h>
|
|
|
|
|
#include <string.h>
|
|
|
|
|
#include <unistd.h>
|
|
|
|
|
#include <errno.h>
|
|
|
|
|
#include <sys/types.h>
|
|
|
|
|
#include <sys/stat.h>
|
|
|
|
|
|
|
|
|
|
/* hv: fix a few EMX problems, will disappear with real UnixOS/2 */
|
|
|
|
|
#ifdef __UNIXOS2__
|
|
|
|
|
#define sync() /*nothing*/
|
|
|
|
|
static int getuid() { return 0; }
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#include <X11/Xlib.h>
|
|
|
|
|
#include <X11/extensions/XKBstr.h>
|
|
|
|
|
#include <X11/extensions/XKBrules.h>
|
|
|
|
|
#define MAX_XKBOPTIONS 5
|
|
|
|
|
|
|
|
|
|
#include "cards.h"
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Define the following to 310 to remove references to XFree86 features that
|
|
|
|
|
* have been added since XFree86 3.1 (e.g. DoubleScan modes).
|
|
|
|
|
* or to 311 to remove certain new modelines
|
|
|
|
|
*/
|
|
|
|
|
#define XFREE86_VERSION 400
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Define this to have /etc/X11/XF86Config prompted for as the default
|
|
|
|
|
* location to write the XF86Config file to.
|
|
|
|
|
*/
|
|
|
|
|
#define PREFER_XF86CONFIG_IN_ETC
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Define this to force the user to go through XKB configuration section.
|
|
|
|
|
*
|
|
|
|
|
*/
|
|
|
|
|
#define FORCE_XKB_DIALOG
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Configuration variables.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define MAX_CLOCKS_LINES 16
|
|
|
|
|
|
|
|
|
|
#define DUMBCONFIG2 "dumbconfig.2"
|
|
|
|
|
#define DUMBCONFIG3 "dumbconfig.3"
|
|
|
|
|
|
|
|
|
|
/* some more vars to make path names in texts more flexible. OS/2 users
|
|
|
|
|
* may be more irritated than Unix users
|
|
|
|
|
*/
|
|
|
|
|
#ifndef PROJECTROOT
|
2006-11-28 13:29:31 -07:00
|
|
|
#define PROJECTROOT "/usr/X11R6"
|
2006-11-26 11:13:41 -07:00
|
|
|
#endif
|
|
|
|
|
#define TREEROOT PROJECTROOT
|
|
|
|
|
#define TREEROOTLX TREEROOT "/lib/X11"
|
|
|
|
|
#define TREEROOTCFG TREEROOT "/etc/X11"
|
|
|
|
|
#define TREEROOTSHARE TREEROOT "/share/X11"
|
|
|
|
|
#ifdef XDOCDIR
|
|
|
|
|
# define TREEROOTDOC XDOCDIR
|
|
|
|
|
#else
|
|
|
|
|
# define TREEROOTDOC TREEROOTLX "/doc"
|
|
|
|
|
#endif
|
|
|
|
|
#ifdef XFONTDIR
|
|
|
|
|
# define TREEROOTFONT XFONTDIR
|
|
|
|
|
#else
|
|
|
|
|
# define TREEROOTFONT TREEROOTLX "/fonts"
|
|
|
|
|
#endif
|
|
|
|
|
#define MODULEPATH TREEROOT "/lib/modules"
|
|
|
|
|
|
|
|
|
|
#ifndef __UNIXOS2__
|
|
|
|
|
#define XSERVERNAME_FOR_PROBE "X"
|
|
|
|
|
#else
|
|
|
|
|
#define XSERVERNAME_FOR_PROBE PROJECTROOT"/bin/"__XSERVERNAME__
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifndef XCONFIGFILE
|
|
|
|
|
#define XCONFIGFILE "xorg.conf"
|
|
|
|
|
#endif
|
|
|
|
|
#define CONFIGNAME XCONFIGFILE
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* This is the filename of the temporary XF86Config file that is written
|
|
|
|
|
* when the program is told to probe clocks (which can only happen for
|
|
|
|
|
* root).
|
|
|
|
|
*/
|
|
|
|
|
#define TEMPORARY_XF86CONFIG_DIR_PREFIX "/tmp/."XCONFIGFILE
|
|
|
|
|
#define TEMPORARY_XF86CONFIG_FILENAME XCONFIGFILE".tmp"
|
|
|
|
|
|
|
|
|
|
#ifndef XF86_VERSION_MAJOR
|
|
|
|
|
#ifdef XVERSION
|
|
|
|
|
#if XVERSION > 40000000
|
|
|
|
|
#define XF86_VERSION_MAJOR (XVERSION / 10000000)
|
|
|
|
|
#else
|
|
|
|
|
#define XF86_VERSION_MAJOR (XVERSION / 1000)
|
|
|
|
|
#endif
|
|
|
|
|
#else
|
|
|
|
|
#define XF86_VERSION_MAJOR 4
|
|
|
|
|
#endif
|
|
|
|
|
#endif
|
|
|
|
|
|
2006-11-28 13:29:31 -07:00
|
|
|
#if defined(__OpenBSD__) && defined(WSCONS_SUPPORT) && !defined(PCVT_SUPPORT)
|
|
|
|
|
/* OpenBSD/macppc now has support for Standard kbd protocol under wscons */
|
|
|
|
|
# ifndef __powerpc__
|
|
|
|
|
# define NEED_WSKBD
|
|
|
|
|
# endif
|
|
|
|
|
#endif
|
2006-11-26 11:13:41 -07:00
|
|
|
|
|
|
|
|
int config_mousetype; /* Mouse. */
|
|
|
|
|
int config_emulate3buttons;
|
|
|
|
|
int config_chordmiddle;
|
|
|
|
|
int config_cleardtrrts;
|
2006-11-28 13:29:31 -07:00
|
|
|
int config_wheel;
|
2006-11-26 11:13:41 -07:00
|
|
|
char *config_pointerdevice;
|
|
|
|
|
int config_altmeta; /* Keyboard. */
|
|
|
|
|
int config_monitortype; /* Monitor. */
|
|
|
|
|
char *config_hsyncrange;
|
|
|
|
|
char *config_vsyncrange;
|
|
|
|
|
char *config_monitoridentifier;
|
|
|
|
|
int config_videomemory; /* Video card. */
|
|
|
|
|
int config_screentype; /* mono, vga16, svga, accel */
|
|
|
|
|
char *config_deviceidentifier;
|
|
|
|
|
int config_numberofclockslines;
|
|
|
|
|
char *config_clocksline[MAX_CLOCKS_LINES];
|
|
|
|
|
char *config_modesline8bpp;
|
|
|
|
|
char *config_modesline16bpp;
|
|
|
|
|
char *config_modesline24bpp;
|
|
|
|
|
int config_virtual; /* 1 (yes) or 0 (no) */
|
|
|
|
|
int config_virtualx8bpp, config_virtualy8bpp;
|
|
|
|
|
int config_virtualx16bpp, config_virtualy16bpp;
|
|
|
|
|
int config_virtualx24bpp, config_virtualy24bpp;
|
|
|
|
|
char *config_ramdac;
|
|
|
|
|
char *config_dacspeed;
|
|
|
|
|
char *config_clockchip;
|
2006-11-28 13:29:31 -07:00
|
|
|
#ifdef NEED_WSKBD
|
2006-11-26 11:13:41 -07:00
|
|
|
char *config_keyboard_dev = "/dev/wskbd0";
|
|
|
|
|
#endif
|
|
|
|
|
int config_xkbdisable = 0;
|
|
|
|
|
char *config_xkbrules;
|
|
|
|
|
char *config_xkbmodel = "pc105";
|
|
|
|
|
char *config_xkblayout = "us";
|
|
|
|
|
char *config_xkbvariant = (char *) 0;
|
|
|
|
|
char *config_xkboptions = (char *) 0;
|
|
|
|
|
char *config_depth;
|
|
|
|
|
|
|
|
|
|
char *temp_dir = "";
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* These are from the selected card definition. Parameters from the
|
|
|
|
|
* definition are offered during the questioning about the video card.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
int card_selected; /* Card selected from database. */
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static int write_XF86Config(char *filename);
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* This is the initial intro text that appears when the program is started.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
static char *intro_text =
|
|
|
|
|
"\n"
|
|
|
|
|
"This program will create a basic " CONFIGNAME " file, based on menu selections\n"
|
|
|
|
|
"you make. It will ask for a pathname when it is ready to write the file.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"The " CONFIGNAME " file usually resides in /etc/X11 or " TREEROOTCFG ". If\n"
|
|
|
|
|
"no " CONFIGNAME " file is present there, " __XSERVERNAME__" will probe the system to\n"
|
|
|
|
|
"autoconfigure itself. You can run " __XSERVERNAME__ " -configure to generate a " CONFIGNAME "\n"
|
|
|
|
|
"file based on the results of autoconfiguration, or let this program\n"
|
|
|
|
|
"produce a base " CONFIGNAME " file for your configuration, and fine-tune it.\n"
|
|
|
|
|
"A sample " CONFIGNAME " file is also supplied with "__XSERVERNAME__"; it is configured \n"
|
|
|
|
|
"for a standard VGA card and monitor with 640x480 resolution.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"There are also many chipset and card-specific options and settings available,\n"
|
|
|
|
|
"but this program does not know about these. On some configurations some of\n"
|
|
|
|
|
"these settings must be specified. Refer to the X driver man pages and the\n"
|
|
|
|
|
"chipset-specific READMEs in " TREEROOTDOC " for further details.\n"
|
|
|
|
|
#if 0
|
|
|
|
|
" Refer to " TREEROOTDOC "/README.Config\n"
|
|
|
|
|
"for a detailed overview of the configuration process.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"(what should we change this section to?)\n"
|
|
|
|
|
"For accelerated servers (including accelerated drivers in the SVGA server),\n"
|
|
|
|
|
"there are many chipset and card-specific options and settings. This program\n"
|
|
|
|
|
"does not know about these. On some configurations some of these settings must\n"
|
|
|
|
|
"be specified. Refer to the server man pages and chipset-specific READMEs.\n"
|
|
|
|
|
#endif
|
|
|
|
|
"\n"
|
|
|
|
|
"Before continuing with this program, make sure you know what video card\n"
|
|
|
|
|
"you have, and preferably also the chipset it uses and the amount of video\n"
|
|
|
|
|
"memory on your video card, as well as the specifications of your monitor.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
;
|
|
|
|
|
|
|
|
|
|
static char *finalcomment_text =
|
|
|
|
|
"File has been written. Take a look at it before starting an X server. Note that\n"
|
|
|
|
|
"the " CONFIGNAME " file must be in one of the directories searched by the server\n"
|
|
|
|
|
"(e.g. /etc/X11) in order to be used. Within the server press\n"
|
|
|
|
|
"ctrl, alt and '+' simultaneously to cycle video resolutions. Pressing ctrl,\n"
|
|
|
|
|
"alt and backspace simultaneously immediately exits the server (use if\n"
|
|
|
|
|
"the monitor doesn't sync for a particular mode).\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"For further configuration, refer to the " XCONFIGFILE "(" FILEMANSUFFIX ") manual page.\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static void *
|
|
|
|
|
Malloc(int i) {
|
|
|
|
|
void *p;
|
|
|
|
|
|
|
|
|
|
p = malloc(i);
|
|
|
|
|
if (p == NULL) {
|
|
|
|
|
printf("Fatal malloc error\n");
|
|
|
|
|
exit(-1);
|
|
|
|
|
}
|
|
|
|
|
return p;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static char *
|
|
|
|
|
Strdup(const char *s){
|
|
|
|
|
char *d;
|
|
|
|
|
|
|
|
|
|
d = Malloc(strlen(s) + 1);
|
|
|
|
|
strcpy(d, s);
|
|
|
|
|
return d;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
createtmpdir(void) {
|
|
|
|
|
/* length of prefix + 20 (digits in 2**64) + 1 (slash) + 1 */
|
|
|
|
|
temp_dir = Malloc(strlen(TEMPORARY_XF86CONFIG_DIR_PREFIX) + 22);
|
|
|
|
|
sprintf(temp_dir, "%s%ld", TEMPORARY_XF86CONFIG_DIR_PREFIX,
|
|
|
|
|
(long)getpid());
|
|
|
|
|
if (mkdir(temp_dir, 0700) != 0) {
|
|
|
|
|
printf("Cannot create directory %s\n", temp_dir);
|
|
|
|
|
exit(-1);
|
|
|
|
|
}
|
|
|
|
|
/* append a slash */
|
|
|
|
|
strcat(temp_dir, "/");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
void
|
|
|
|
|
keypress(void) {
|
|
|
|
|
printf("Press enter to continue, or ctrl-c to abort.");
|
|
|
|
|
getchar();
|
|
|
|
|
printf("\n");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
emptylines(void) {
|
|
|
|
|
int i;
|
|
|
|
|
for (i = 0; i < 50; i++)
|
|
|
|
|
printf("\n");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
answerisyes(char *s)
|
|
|
|
|
{
|
|
|
|
|
if (s[0] == '\'') /* For fools that type the ' literally. */
|
|
|
|
|
return tolower(s[1]) == 'y';
|
|
|
|
|
return tolower(s[0]) == 'y';
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* This is a replacement for gets(). Limit is 80 chars.
|
|
|
|
|
* The 386BSD descendants scream about using gets(), for good reason.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
getstring(char *s)
|
|
|
|
|
{
|
|
|
|
|
char *cp;
|
|
|
|
|
if (fgets(s, 80, stdin) == NULL)
|
|
|
|
|
exit(1);
|
|
|
|
|
cp = strchr(s, '\n');
|
|
|
|
|
if (cp)
|
|
|
|
|
*cp=0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Mouse configuration.
|
|
|
|
|
*
|
|
|
|
|
* (hv) OS/2 (__UNIXOS2__) only has an OS supported mouse, so user has no options
|
|
|
|
|
* the server will enable a third button automatically if there is one
|
|
|
|
|
* We also do the same for QNX4, since we use the OS mouse drivers.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
int M_OSMOUSE, M_WSMOUSE, M_AUTO,
|
|
|
|
|
M_SYSMOUSE, M_MOUSESYSTEMS, M_PS2,
|
|
|
|
|
M_MICROSOFT, M_BUSMOUSE, M_IMPS2,
|
|
|
|
|
M_EXPLORER_PS2, M_GLIDEPOINT_PS2, M_MOUSEMANPLUS_PS2,
|
|
|
|
|
M_NETMOUSE_PS2, M_NETSCROLL_PS2, M_THINKINGMOUSE_PS2,
|
|
|
|
|
M_ACECAD, M_GLIDEPOINT, M_INTELLIMOUSE,
|
|
|
|
|
M_LOGITECH, M_MMHITTAB, M_MMSERIES,
|
|
|
|
|
M_MOUSEMAN, M_THINKINGMOUSE, M_VUID;
|
|
|
|
|
|
|
|
|
|
struct {
|
|
|
|
|
char *name;
|
|
|
|
|
int *ident;
|
|
|
|
|
char *desc;
|
|
|
|
|
} mouse_info[] = {
|
|
|
|
|
#if defined(__UNIXOS2__) || defined(QNX4)
|
|
|
|
|
#define DEF_PROTO_STRING "OSMOUSE"
|
|
|
|
|
{"OSMOUSE", &M_OSMOUSE,
|
|
|
|
|
"OSMOUSE"
|
|
|
|
|
},
|
|
|
|
|
#endif
|
|
|
|
|
#ifdef WSCONS_SUPPORT
|
|
|
|
|
#define WS_MOUSE_STRING "wsmouse"
|
|
|
|
|
#define DEF_PROTO_STRING WS_MOUSE_STRING
|
|
|
|
|
{WS_MOUSE_STRING, &M_WSMOUSE,
|
|
|
|
|
"wsmouse protocol"
|
|
|
|
|
},
|
|
|
|
|
#endif
|
|
|
|
|
#ifndef DEF_PROTO_STRING
|
|
|
|
|
#define DEF_PROTO_STRING "Auto"
|
|
|
|
|
#endif
|
|
|
|
|
{"Auto", &M_AUTO,
|
|
|
|
|
"Auto detect"
|
|
|
|
|
},
|
|
|
|
|
#ifdef sun
|
|
|
|
|
{"VUID", &M_VUID,
|
|
|
|
|
"Solaris VUID protocol (SPARC, USB, or virtual mouse)"
|
|
|
|
|
},
|
|
|
|
|
#endif
|
|
|
|
|
{"SysMouse", &M_SYSMOUSE,
|
|
|
|
|
"SysMouse"
|
|
|
|
|
},
|
|
|
|
|
#define M_MOUSESYSTEMS_STRING "MouseSystems"
|
|
|
|
|
{M_MOUSESYSTEMS_STRING, &M_MOUSESYSTEMS,
|
|
|
|
|
"Mouse Systems (3-button protocol)"
|
|
|
|
|
},
|
|
|
|
|
{"PS/2", &M_PS2,
|
|
|
|
|
"PS/2 Mouse"
|
|
|
|
|
},
|
|
|
|
|
#define M_MICROSOFT_STRING "Microsoft"
|
|
|
|
|
{M_MICROSOFT_STRING, &M_MICROSOFT,
|
|
|
|
|
"Microsoft compatible (2-button protocol)"
|
|
|
|
|
},
|
|
|
|
|
{"Busmouse", &M_BUSMOUSE,
|
|
|
|
|
"Bus Mouse"
|
|
|
|
|
},
|
|
|
|
|
#ifndef __FreeBSD__
|
|
|
|
|
{"IMPS/2", &M_IMPS2,
|
|
|
|
|
"IntelliMouse PS/2"
|
|
|
|
|
},
|
|
|
|
|
{"ExplorerPS/2", &M_EXPLORER_PS2,
|
|
|
|
|
"Explorer PS/2"
|
|
|
|
|
},
|
|
|
|
|
{"GlidePointPS/2", &M_GLIDEPOINT_PS2,
|
|
|
|
|
"GlidePoint PS/2"
|
|
|
|
|
},
|
|
|
|
|
{"MouseManPlusPS/2", &M_MOUSEMANPLUS_PS2,
|
|
|
|
|
"MouseManPlus PS/2"
|
|
|
|
|
},
|
|
|
|
|
{"NetMousePS/2", &M_NETMOUSE_PS2,
|
|
|
|
|
"NetMouse PS/2"
|
|
|
|
|
},
|
|
|
|
|
{"NetScrollPS/2", &M_NETSCROLL_PS2,
|
|
|
|
|
"NetScroll PS/2"
|
|
|
|
|
},
|
|
|
|
|
{"ThinkingMousePS/2", &M_THINKINGMOUSE_PS2,
|
|
|
|
|
"ThinkingMouse PS/2"
|
|
|
|
|
},
|
|
|
|
|
#endif
|
|
|
|
|
{"AceCad", &M_ACECAD,
|
|
|
|
|
"AceCad"
|
|
|
|
|
},
|
|
|
|
|
{"GlidePoint", &M_GLIDEPOINT,
|
|
|
|
|
"GlidePoint"
|
|
|
|
|
},
|
|
|
|
|
{"IntelliMouse", &M_INTELLIMOUSE,
|
|
|
|
|
"Microsoft IntelliMouse"
|
|
|
|
|
},
|
|
|
|
|
{"Logitech", &M_LOGITECH,
|
|
|
|
|
"Logitech Mouse (serial, old type, Logitech protocol)"
|
|
|
|
|
},
|
|
|
|
|
{"MMHitTab", &M_MMHITTAB,
|
|
|
|
|
"MM HitTablet"
|
|
|
|
|
},
|
|
|
|
|
{"MMSeries", &M_MMSERIES,
|
|
|
|
|
"MM Series" /* XXXX These descriptions should be improved. */
|
|
|
|
|
},
|
|
|
|
|
{"MouseMan", &M_MOUSEMAN,
|
|
|
|
|
"Logitech MouseMan (Microsoft compatible)"
|
|
|
|
|
},
|
|
|
|
|
{"ThinkingMouse", &M_THINKINGMOUSE,
|
|
|
|
|
"ThinkingMouse"
|
|
|
|
|
},
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
#ifdef WSCONS_SUPPORT
|
|
|
|
|
# define DEF_MOUSEDEV "/dev/wsmouse";
|
2006-12-16 13:59:13 -07:00
|
|
|
#elif defined(__FreeBSD__) || defined(__DragonFly__)
|
2006-11-26 11:13:41 -07:00
|
|
|
# define DEF_MOUSEDEV "/dev/sysmouse";
|
|
|
|
|
#elif defined(__linux__)
|
|
|
|
|
# define DEF_MOUSEDEV "/dev/input/mice";
|
|
|
|
|
#else
|
|
|
|
|
# define DEF_MOUSEDEV "/dev/mouse";
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifndef __UNIXOS2__
|
|
|
|
|
static char *mouseintro_text =
|
|
|
|
|
"First specify a mouse protocol type. Choose one from the following list:\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static char *mousedev_text =
|
|
|
|
|
"Now give the full device name that the mouse is connected to, for example\n"
|
|
|
|
|
"/dev/tty00. Just pressing enter will use the default, %s.\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static char *mousecomment_text =
|
|
|
|
|
"The recommended protocol is " DEF_PROTO_STRING ". If you have a very old mouse\n"
|
|
|
|
|
"or don't want OS support or auto detection, and you have a two-button\n"
|
|
|
|
|
"or three-button serial mouse, it is most likely of type " M_MICROSOFT_STRING ".\n"
|
|
|
|
|
#ifdef WSCONS_SUPPORT
|
|
|
|
|
"\n"
|
|
|
|
|
"If your system uses the wscons console driver, with a PS/2 type mouse,\n"
|
|
|
|
|
"select " WS_MOUSE_STRING ".\n"
|
|
|
|
|
#endif
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static char *twobuttonmousecomment_text =
|
|
|
|
|
"You have selected a two-button mouse protocol. It is recommended that you\n"
|
|
|
|
|
"enable Emulate3Buttons.\n";
|
|
|
|
|
|
|
|
|
|
static char *threebuttonmousecomment_text =
|
|
|
|
|
"You have selected a three-button mouse protocol. It is recommended that you\n"
|
|
|
|
|
"do not enable Emulate3Buttons, unless the third button doesn't work.\n";
|
|
|
|
|
|
|
|
|
|
static char *unknownbuttonsmousecomment_text =
|
|
|
|
|
"If your mouse has only two buttons, it is recommended that you enable\n"
|
|
|
|
|
"Emulate3Buttons.\n";
|
|
|
|
|
|
|
|
|
|
static char *microsoftmousecomment_text =
|
|
|
|
|
"You have selected a Microsoft protocol mouse. If your mouse was made by\n"
|
|
|
|
|
"Logitech, you might want to enable ChordMiddle which could cause the\n"
|
|
|
|
|
"third button to work.\n";
|
|
|
|
|
|
|
|
|
|
static char *mousesystemscomment_text =
|
|
|
|
|
"You have selected a Mouse Systems protocol mouse. If your mouse is normally\n"
|
|
|
|
|
"in Microsoft-compatible mode, enabling the ClearDTR and ClearRTS options\n"
|
|
|
|
|
"may cause it to switch to Mouse Systems mode when the server starts.\n";
|
|
|
|
|
|
|
|
|
|
static char *logitechmousecomment_text =
|
|
|
|
|
"You have selected a Logitech protocol mouse. This is only valid for old\n"
|
|
|
|
|
"Logitech mice.\n";
|
|
|
|
|
|
|
|
|
|
static char *mousemancomment_text =
|
|
|
|
|
"You have selected a Logitech MouseMan type mouse. You might want to enable\n"
|
|
|
|
|
"ChordMiddle which could cause the third button to work.\n";
|
|
|
|
|
|
|
|
|
|
#endif /* !__UNIXOS2__ */
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
mouse_configuration(void) {
|
|
|
|
|
|
|
|
|
|
#if !defined(__UNIXOS2__) && !defined(QNX4)
|
|
|
|
|
int i, j;
|
|
|
|
|
char s[80];
|
|
|
|
|
char *def_mousedev = DEF_MOUSEDEV;
|
|
|
|
|
|
|
|
|
|
#define MOUSETYPE_COUNT sizeof(mouse_info)/sizeof(mouse_info[0])
|
|
|
|
|
for (i = 0; i < MOUSETYPE_COUNT; i++)
|
|
|
|
|
*(mouse_info[i].ident) = i;
|
|
|
|
|
|
|
|
|
|
for (i=0;;) {
|
|
|
|
|
emptylines();
|
|
|
|
|
printf("%s", mouseintro_text);
|
|
|
|
|
for (j = i; j < i + 14 && j < MOUSETYPE_COUNT; j++)
|
|
|
|
|
printf("%2d. %s [%s]\n", j + 1,
|
|
|
|
|
mouse_info[j].name, mouse_info[j].desc);
|
|
|
|
|
printf("\n");
|
|
|
|
|
printf("%s", mousecomment_text);
|
|
|
|
|
printf("Enter a protocol number: ");
|
|
|
|
|
getstring(s);
|
|
|
|
|
if (strlen(s) == 0) {
|
|
|
|
|
i += 14;
|
|
|
|
|
if (i >= MOUSETYPE_COUNT)
|
|
|
|
|
i = 0;
|
|
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
config_mousetype = atoi(s) - 1;
|
|
|
|
|
if (config_mousetype >= 0 && config_mousetype < MOUSETYPE_COUNT)
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
printf("\n");
|
|
|
|
|
|
|
|
|
|
if (config_mousetype == M_LOGITECH) {
|
|
|
|
|
/* Logitech. */
|
|
|
|
|
printf("%s", logitechmousecomment_text);
|
|
|
|
|
printf("\n");
|
|
|
|
|
printf("Please answer the following question with either 'y' or 'n'.\n");
|
|
|
|
|
printf("Are you sure it's really not a Microsoft compatible one? ");
|
|
|
|
|
getstring(s);
|
|
|
|
|
if (!answerisyes(s))
|
|
|
|
|
config_mousetype = M_MICROSOFT;
|
|
|
|
|
printf("\n");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
config_chordmiddle = 0;
|
|
|
|
|
if (config_mousetype == M_MICROSOFT || config_mousetype == M_MOUSEMAN) {
|
|
|
|
|
/* Microsoft or MouseMan. */
|
|
|
|
|
if (config_mousetype == M_MICROSOFT)
|
|
|
|
|
printf("%s", microsoftmousecomment_text);
|
|
|
|
|
else
|
|
|
|
|
printf("%s", mousemancomment_text);
|
|
|
|
|
printf("\n");
|
|
|
|
|
printf("Please answer the following question with either 'y' or 'n'.\n");
|
|
|
|
|
printf("Do you want to enable ChordMiddle? ");
|
|
|
|
|
getstring(s);
|
|
|
|
|
if (answerisyes(s))
|
|
|
|
|
config_chordmiddle = 1;
|
|
|
|
|
printf("\n");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
config_cleardtrrts = 0;
|
|
|
|
|
if (config_mousetype == M_MOUSESYSTEMS) {
|
|
|
|
|
/* Mouse Systems. */
|
|
|
|
|
printf("%s", mousesystemscomment_text);
|
|
|
|
|
printf("\n");
|
|
|
|
|
printf("Please answer the following question with either 'y' or 'n'.\n");
|
|
|
|
|
printf("Do you want to enable ClearDTR and ClearRTS? ");
|
|
|
|
|
getstring(s);
|
|
|
|
|
if (answerisyes(s))
|
|
|
|
|
config_cleardtrrts = 1;
|
|
|
|
|
printf("\n");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (config_mousetype == M_MICROSOFT) {
|
|
|
|
|
if (config_chordmiddle)
|
|
|
|
|
printf("%s", threebuttonmousecomment_text);
|
|
|
|
|
else
|
|
|
|
|
printf("%s", twobuttonmousecomment_text);
|
|
|
|
|
}
|
|
|
|
|
else if (config_mousetype == M_MOUSESYSTEMS ||
|
|
|
|
|
config_mousetype == M_INTELLIMOUSE) {
|
|
|
|
|
printf("%s", threebuttonmousecomment_text);
|
|
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
printf("%s", unknownbuttonsmousecomment_text);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
printf("\n");
|
|
|
|
|
|
2006-11-28 13:29:31 -07:00
|
|
|
printf("Please answer the following questions with either 'y' or 'n'.\n");
|
2006-11-26 11:13:41 -07:00
|
|
|
printf("Do you want to enable Emulate3Buttons? ");
|
|
|
|
|
getstring(s);
|
|
|
|
|
if (answerisyes(s))
|
|
|
|
|
config_emulate3buttons = 1;
|
|
|
|
|
else
|
|
|
|
|
config_emulate3buttons = 0;
|
|
|
|
|
printf("\n");
|
|
|
|
|
|
2006-11-28 13:29:31 -07:00
|
|
|
printf("Do you want to configure a mouse wheel? ");
|
|
|
|
|
getstring(s);
|
|
|
|
|
if (answerisyes(s))
|
|
|
|
|
config_wheel = 1;
|
|
|
|
|
else
|
|
|
|
|
config_wheel = 0;
|
|
|
|
|
printf("\n");
|
|
|
|
|
|
2006-11-26 11:13:41 -07:00
|
|
|
#if (defined(sun) && (defined(__i386) || defined(__x86)))
|
|
|
|
|
/* SPARC & USB mice (VUID or AUTO protocols) default to /dev/mouse,
|
|
|
|
|
but PS/2 mice default to /dev/kdmouse */
|
|
|
|
|
if ((config_mousetype != M_AUTO) && (config_mousetype != M_VUID)) {
|
|
|
|
|
def_mousedev = "/dev/kdmouse";
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
printf(mousedev_text, def_mousedev);
|
|
|
|
|
printf("Mouse device: ");
|
|
|
|
|
getstring(s);
|
|
|
|
|
if (strlen(s) == 0) {
|
|
|
|
|
config_pointerdevice = def_mousedev;
|
|
|
|
|
} else {
|
|
|
|
|
config_pointerdevice = Malloc(strlen(s) + 1);
|
|
|
|
|
strcpy(config_pointerdevice, s);
|
|
|
|
|
}
|
|
|
|
|
printf("\n");
|
|
|
|
|
|
|
|
|
|
#else /* __UNIXOS2__ */
|
|
|
|
|
/* set some reasonable defaults for OS/2 */
|
|
|
|
|
config_mousetype = M_OSMOUSE;
|
|
|
|
|
config_chordmiddle = 0;
|
|
|
|
|
config_cleardtrrts = 0;
|
|
|
|
|
config_emulate3buttons = 0;
|
|
|
|
|
#if !defined(QNX4)
|
|
|
|
|
config_pointerdevice = "OS2MOUSE";
|
|
|
|
|
#else
|
|
|
|
|
config_pointerdevice = "QNXMOUSE";
|
|
|
|
|
#endif
|
|
|
|
|
#endif /* __UNIXOS2__ */
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Keyboard configuration.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Configuration of XKB
|
|
|
|
|
*/
|
|
|
|
|
static char *xkbmodeltext =
|
|
|
|
|
"Please select one of the following keyboard types that is the better\n"
|
|
|
|
|
"description of your keyboard. If nothing really matches,\n"
|
|
|
|
|
"choose \"Generic 104-key PC\"\n\n";
|
|
|
|
|
|
|
|
|
|
static char *xkblayouttext =
|
|
|
|
|
"Please select the layout corresponding to your keyboard\n";
|
|
|
|
|
|
|
|
|
|
static char *xkbvarianttext =
|
|
|
|
|
"Please enter a variant name for '%s' layout. Or just press enter\n"
|
|
|
|
|
"for default variant\n\n";
|
|
|
|
|
|
|
|
|
|
static char *xkboptionstext =
|
|
|
|
|
"Please answer the following question with either 'y' or 'n'.\n"
|
|
|
|
|
"Do you want to select additional XKB options (group switcher,\n"
|
|
|
|
|
"group indicator, etc.)? ";
|
|
|
|
|
|
2006-11-28 13:29:31 -07:00
|
|
|
#ifdef NEED_WSKBD
|
2006-11-26 11:13:41 -07:00
|
|
|
static char *kbdevtext =
|
|
|
|
|
"Please enter the device name for your keyboard or just press enter\n"
|
|
|
|
|
"for the default of wskbd0\n\n";
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
keyboard_configuration(void)
|
|
|
|
|
{
|
|
|
|
|
int i, j;
|
|
|
|
|
char s[80];
|
|
|
|
|
char *rulesfile;
|
|
|
|
|
int number, options[MAX_XKBOPTIONS], num_options;
|
|
|
|
|
XkbRF_RulesPtr rules;
|
|
|
|
|
|
2006-11-28 13:29:31 -07:00
|
|
|
#ifdef NEED_WSKBD
|
2006-11-26 11:13:41 -07:00
|
|
|
printf(kbdevtext);
|
|
|
|
|
getstring(s);
|
|
|
|
|
if (strlen(s) != 0) {
|
|
|
|
|
config_keyboard_dev = Malloc(strlen(s) + 1);
|
|
|
|
|
strcpy(config_keyboard_dev, s);
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifndef XKB_RULES_DIR
|
|
|
|
|
# define XKB_RULES_DIR XKB_BASE_DIRECTORY "/rules"
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifdef XFREE98_XKB
|
|
|
|
|
config_xkbrules = "xfree98"; /* static */
|
|
|
|
|
rulesfile = XKB_RULES_DIR "/xfree98";
|
|
|
|
|
#else
|
|
|
|
|
config_xkbrules = __XKBDEFRULES__; /* static */
|
|
|
|
|
rulesfile = XKB_RULES_DIR "/" __XKBDEFRULES__;
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
rules = XkbRF_Load(rulesfile, "", True, False);
|
|
|
|
|
emptylines();
|
|
|
|
|
|
|
|
|
|
if (!rules) {
|
|
|
|
|
printf("XKB rules file '%s' not found\n", rulesfile);
|
|
|
|
|
printf("Keyboard XKB options will be set to default values.\n");
|
|
|
|
|
keypress();
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
number = -1;
|
|
|
|
|
for (i=0;;) {
|
|
|
|
|
emptylines();
|
|
|
|
|
printf(xkbmodeltext);
|
|
|
|
|
for (j = i; j < i + 16 && j < rules->models.num_desc; j++)
|
|
|
|
|
printf("%3d %-50s\n", j+1, rules->models.desc[j].desc);
|
|
|
|
|
printf("\nEnter a number to choose the keyboard.\n\n");
|
|
|
|
|
if (rules->models.num_desc >= 16)
|
|
|
|
|
printf("Press enter for the next page\n");
|
|
|
|
|
getstring(s);
|
|
|
|
|
if (strlen(s) == 0) {
|
|
|
|
|
i += 16;
|
|
|
|
|
if (i > rules->models.num_desc)
|
|
|
|
|
i = 0;
|
|
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
number = atoi(s) - 1;
|
|
|
|
|
if (number >= 0 && number < rules->models.num_desc)
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
i = strlen(rules->models.desc[number].name) + 1;
|
|
|
|
|
config_xkbmodel = Malloc(i);
|
|
|
|
|
sprintf(config_xkbmodel,"%s", rules->models.desc[number].name);
|
|
|
|
|
|
|
|
|
|
emptylines();
|
|
|
|
|
printf(xkblayouttext);
|
|
|
|
|
|
|
|
|
|
number = -1;
|
|
|
|
|
for (i=0;;) {
|
|
|
|
|
emptylines();
|
|
|
|
|
for (j = i; j < i + 18 && j < rules->layouts.num_desc; j++)
|
|
|
|
|
printf("%3d %-50s\n", j+1,
|
|
|
|
|
rules->layouts.desc[j].desc);
|
|
|
|
|
printf("\n");
|
|
|
|
|
printf("Enter a number to choose the country.\n");
|
|
|
|
|
if (rules->layouts.num_desc >= 18)
|
|
|
|
|
printf("Press enter for the next page\n");
|
|
|
|
|
printf("\n");
|
|
|
|
|
getstring(s);
|
|
|
|
|
if (strlen(s) == 0) {
|
|
|
|
|
i += 18;
|
|
|
|
|
if (i > rules->layouts.num_desc)
|
|
|
|
|
i = 0;
|
|
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
number = atoi(s) - 1;
|
|
|
|
|
if (number >= 0 && number < rules->layouts.num_desc)
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
config_xkblayout = Malloc(strlen(rules->layouts.desc[number].name)+1);
|
|
|
|
|
sprintf(config_xkblayout,"%s", rules->layouts.desc[number].name);
|
|
|
|
|
|
|
|
|
|
emptylines();
|
|
|
|
|
printf(xkbvarianttext, config_xkblayout);
|
|
|
|
|
getstring(s);
|
|
|
|
|
if (strlen(s) != 0) {
|
|
|
|
|
config_xkbvariant = Malloc(strlen(s) + 1);
|
|
|
|
|
strcpy(config_xkbvariant, s);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
emptylines();
|
|
|
|
|
printf(xkboptionstext);
|
|
|
|
|
getstring(s);
|
|
|
|
|
if (!answerisyes(s))
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
num_options = 0;
|
|
|
|
|
for (j=0,i=0;;) {
|
|
|
|
|
if (!strchr(rules->options.desc[i].name, ':')) {
|
|
|
|
|
emptylines();
|
|
|
|
|
printf(" %s\n\n", rules->options.desc[i].desc);
|
|
|
|
|
j = i;
|
|
|
|
|
} else {
|
|
|
|
|
printf("%3d %-50s\n", i - j, rules->options.desc[i].desc);
|
|
|
|
|
}
|
|
|
|
|
i++;
|
|
|
|
|
if ( i == rules->options.num_desc ||
|
|
|
|
|
!strchr(rules->options.desc[i].name, ':')) {
|
|
|
|
|
printf("\nPlease select the option or just press enter if none\n");
|
|
|
|
|
getstring(s);
|
|
|
|
|
if (strlen(s) != 0) {
|
|
|
|
|
number = atoi(s);
|
|
|
|
|
if (number && (num_options < MAX_XKBOPTIONS)) {
|
|
|
|
|
options[num_options++] = number + j;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
if (i == rules->options.num_desc)
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (!num_options)
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
for (j=0,i=0; i<num_options; i++) {
|
|
|
|
|
j += strlen(rules->options.desc[options[i]].name);
|
|
|
|
|
}
|
|
|
|
|
config_xkboptions = Malloc(j + num_options);
|
|
|
|
|
for (j=0,i=0; i<num_options; i++) {
|
|
|
|
|
j += sprintf(config_xkboptions+j,"%s%s",
|
|
|
|
|
i == 0 ? "": "," ,rules->options.desc[options[i]].name);
|
|
|
|
|
}
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Monitor configuration.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
static char *monitorintro_text =
|
|
|
|
|
"Now we want to set the specifications of the monitor. The two critical\n"
|
|
|
|
|
"parameters are the vertical refresh rate, which is the rate at which the\n"
|
|
|
|
|
"the whole screen is refreshed, and most importantly the horizontal sync rate,\n"
|
|
|
|
|
"which is the rate at which scanlines are displayed.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"The valid range for horizontal sync and vertical sync should be documented\n"
|
|
|
|
|
"in the manual of your monitor.\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static char *hsyncintro_text =
|
|
|
|
|
"You must indicate the horizontal sync range of your monitor. You can either\n"
|
|
|
|
|
"select one of the predefined ranges below that correspond to industry-\n"
|
|
|
|
|
"standard monitor types, or give a specific range.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"It is VERY IMPORTANT that you do not specify a monitor type with a horizontal\n"
|
|
|
|
|
"sync range that is beyond the capabilities of your monitor. If in doubt,\n"
|
|
|
|
|
"choose a conservative setting.\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static char *customhsync_text =
|
|
|
|
|
"Please enter the horizontal sync range of your monitor, in the format used\n"
|
|
|
|
|
"in the table of monitor types above. You can either specify one or more\n"
|
|
|
|
|
"continuous ranges (e.g. 15-25, 30-50), or one or more fixed sync frequencies.\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static char *vsyncintro_text =
|
|
|
|
|
"You must indicate the vertical sync range of your monitor. You can either\n"
|
|
|
|
|
"select one of the predefined ranges below that correspond to industry-\n"
|
|
|
|
|
"standard monitor types, or give a specific range. For interlaced modes,\n"
|
|
|
|
|
"the number that counts is the high one (e.g. 87 Hz rather than 43 Hz).\n"
|
|
|
|
|
"\n"
|
|
|
|
|
" 1 50-70\n"
|
|
|
|
|
" 2 50-90\n"
|
|
|
|
|
" 3 50-100\n"
|
|
|
|
|
" 4 40-150\n"
|
|
|
|
|
" 5 Enter your own vertical sync range\n";
|
|
|
|
|
|
|
|
|
|
static char *monitordescintro_text =
|
|
|
|
|
"You must now enter a few identification/description strings, namely an\n"
|
|
|
|
|
"identifier, a vendor name, and a model name. Just pressing enter will fill\n"
|
|
|
|
|
"in default names.\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
#define NU_MONITORTYPES 10
|
|
|
|
|
|
|
|
|
|
static char *monitortype_range[NU_MONITORTYPES] = {
|
|
|
|
|
"31.5",
|
|
|
|
|
"31.5 - 35.1",
|
|
|
|
|
"31.5, 35.5",
|
|
|
|
|
"31.5, 35.15, 35.5",
|
|
|
|
|
"31.5 - 37.9",
|
|
|
|
|
"31.5 - 48.5",
|
|
|
|
|
"31.5 - 57.0",
|
|
|
|
|
"31.5 - 64.3",
|
|
|
|
|
"31.5 - 79.0",
|
|
|
|
|
"31.5 - 82.0"
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static char *monitortype_name[NU_MONITORTYPES] = {
|
|
|
|
|
"Standard VGA, 640x480 @ 60 Hz",
|
|
|
|
|
"Super VGA, 800x600 @ 56 Hz",
|
|
|
|
|
"8514 Compatible, 1024x768 @ 87 Hz interlaced (no 800x600)",
|
|
|
|
|
"Super VGA, 1024x768 @ 87 Hz interlaced, 800x600 @ 56 Hz",
|
|
|
|
|
"Extended Super VGA, 800x600 @ 60 Hz, 640x480 @ 72 Hz",
|
|
|
|
|
"Non-Interlaced SVGA, 1024x768 @ 60 Hz, 800x600 @ 72 Hz",
|
|
|
|
|
"High Frequency SVGA, 1024x768 @ 70 Hz",
|
|
|
|
|
"Monitor that can do 1280x1024 @ 60 Hz",
|
|
|
|
|
"Monitor that can do 1280x1024 @ 74 Hz",
|
|
|
|
|
"Monitor that can do 1280x1024 @ 76 Hz"
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
monitor_configuration(void) {
|
|
|
|
|
int i;
|
|
|
|
|
char s[80];
|
|
|
|
|
printf("%s", monitorintro_text);
|
|
|
|
|
|
|
|
|
|
keypress();
|
|
|
|
|
emptylines();
|
|
|
|
|
|
|
|
|
|
printf("%s", hsyncintro_text);
|
|
|
|
|
|
|
|
|
|
printf(" hsync in kHz; monitor type with characteristic modes\n");
|
|
|
|
|
for (i = 0; i < NU_MONITORTYPES; i++)
|
|
|
|
|
printf("%2d %s; %s\n", i + 1, monitortype_range[i],
|
|
|
|
|
monitortype_name[i]);
|
|
|
|
|
|
|
|
|
|
printf("%2d Enter your own horizontal sync range\n",
|
|
|
|
|
NU_MONITORTYPES + 1);
|
|
|
|
|
printf("\n");
|
|
|
|
|
|
|
|
|
|
printf("Enter your choice (1-%d): ", NU_MONITORTYPES + 1);
|
|
|
|
|
getstring(s);
|
|
|
|
|
config_monitortype = atoi(s) - 1;
|
|
|
|
|
if (config_monitortype < 0)
|
|
|
|
|
config_monitortype = 0;
|
|
|
|
|
|
|
|
|
|
printf("\n");
|
|
|
|
|
|
|
|
|
|
if (config_monitortype < NU_MONITORTYPES)
|
|
|
|
|
config_hsyncrange = monitortype_range[config_monitortype];
|
|
|
|
|
else {
|
|
|
|
|
/* Custom hsync range option selected. */
|
|
|
|
|
printf("%s", customhsync_text);
|
|
|
|
|
printf("Horizontal sync range: ");
|
|
|
|
|
getstring(s);
|
|
|
|
|
config_hsyncrange = Malloc(strlen(s) + 1);
|
|
|
|
|
strcpy(config_hsyncrange, s);
|
|
|
|
|
printf("\n");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
printf("%s", vsyncintro_text);
|
|
|
|
|
printf("\n");
|
|
|
|
|
|
|
|
|
|
printf("Enter your choice: ");
|
|
|
|
|
getstring(s);
|
|
|
|
|
printf("\n");
|
|
|
|
|
switch (atoi(s)) {
|
|
|
|
|
case 0 :
|
|
|
|
|
case 1 :
|
|
|
|
|
config_vsyncrange = "50-70";
|
|
|
|
|
break;
|
|
|
|
|
case 2 :
|
|
|
|
|
config_vsyncrange = "50-90";
|
|
|
|
|
break;
|
|
|
|
|
case 3 :
|
|
|
|
|
config_vsyncrange = "50-100";
|
|
|
|
|
break;
|
|
|
|
|
case 4 :
|
|
|
|
|
config_vsyncrange = "40-150";
|
|
|
|
|
break;
|
|
|
|
|
case 5 :
|
|
|
|
|
/* Custom vsync range option selected. */
|
|
|
|
|
printf("Vertical sync range: ");
|
|
|
|
|
getstring(s);
|
|
|
|
|
config_vsyncrange = Malloc(strlen(s) + 1);
|
|
|
|
|
strcpy(config_vsyncrange, s);
|
|
|
|
|
printf("\n");
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
printf("%s", monitordescintro_text);
|
|
|
|
|
printf("The strings are free-form, spaces are allowed.\n");
|
|
|
|
|
printf("Enter an identifier for your monitor definition: ");
|
|
|
|
|
getstring(s);
|
|
|
|
|
if (strlen(s) == 0)
|
|
|
|
|
config_monitoridentifier = "My Monitor";
|
|
|
|
|
else {
|
|
|
|
|
config_monitoridentifier = Malloc(strlen(s) + 1);
|
|
|
|
|
strcpy(config_monitoridentifier, s);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Card database.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
static char *cardintro_text =
|
|
|
|
|
"Now we must configure video card specific settings. At this point you can\n"
|
|
|
|
|
"choose to make a selection out of a database of video card definitions.\n"
|
|
|
|
|
"Because there can be variation in Ramdacs and clock generators even\n"
|
|
|
|
|
"between cards of the same model, it is not sensible to blindly copy\n"
|
|
|
|
|
"the settings (e.g. a Device section). For this reason, after you make a\n"
|
|
|
|
|
"selection, you will still be asked about the components of the card, with\n"
|
|
|
|
|
"the settings from the chosen database entry presented as a strong hint.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"The database entries include information about the chipset, what driver to\n"
|
|
|
|
|
"run, the Ramdac and ClockChip, and comments that will be included in the\n"
|
|
|
|
|
"Device section. However, a lot of definitions only hint about what driver\n"
|
|
|
|
|
"to run (based on the chipset the card uses) and are untested.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"If you can't find your card in the database, there's nothing to worry about.\n"
|
|
|
|
|
"You should only choose a database entry that is exactly the same model as\n"
|
|
|
|
|
"your card; choosing one that looks similar is just a bad idea (e.g. a\n"
|
|
|
|
|
"GemStone Snail 64 may be as different from a GemStone Snail 64+ in terms of\n"
|
|
|
|
|
"hardware as can be).\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static char *cardunsupported_text =
|
|
|
|
|
"This card is basically UNSUPPORTED. It may only work as a generic\n"
|
|
|
|
|
"VGA-compatible card. If you have an "__XSERVERNAME__" version more recent than what\n"
|
|
|
|
|
"this card definition was based on, there's a chance that it is now\n"
|
|
|
|
|
"supported.\n";
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
carddb_configuration(void) {
|
|
|
|
|
int i;
|
|
|
|
|
char s[80];
|
|
|
|
|
card_selected = -1;
|
|
|
|
|
printf("%s", cardintro_text);
|
|
|
|
|
printf("Do you want to look at the card database? ");
|
|
|
|
|
getstring(s);
|
|
|
|
|
printf("\n");
|
|
|
|
|
if (!answerisyes(s))
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Choose a database entry.
|
|
|
|
|
*/
|
|
|
|
|
if (parse_database()) {
|
|
|
|
|
printf("Couldn't read card database file %s.\n",
|
|
|
|
|
CARD_DATABASE_FILE);
|
|
|
|
|
keypress();
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
i = 0;
|
|
|
|
|
for (;;) {
|
|
|
|
|
int j;
|
|
|
|
|
emptylines();
|
|
|
|
|
for (j = i; j < i + 18 && j <= lastcard; j++) {
|
|
|
|
|
char *name = card[j].name,
|
|
|
|
|
*chipset = card[j].chipset;
|
|
|
|
|
|
|
|
|
|
printf("%3d %-50s%s\n", j,
|
|
|
|
|
name ? name : "-",
|
|
|
|
|
chipset ? chipset : "-");
|
|
|
|
|
}
|
|
|
|
|
printf("\n");
|
|
|
|
|
printf("Enter a number to choose the corresponding card definition.\n");
|
|
|
|
|
printf("Press enter for the next page, q to continue configuration.\n");
|
|
|
|
|
printf("\n");
|
|
|
|
|
getstring(s);
|
|
|
|
|
if (s[0] == 'q')
|
|
|
|
|
break;
|
|
|
|
|
if (strlen(s) == 0) {
|
|
|
|
|
i += 18;
|
|
|
|
|
if (i > lastcard)
|
|
|
|
|
i = 0;
|
|
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
card_selected = atoi(s);
|
|
|
|
|
if (card_selected >= 0 && card_selected <= lastcard)
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Look at the selected card.
|
|
|
|
|
*/
|
|
|
|
|
if (card_selected != -1) {
|
|
|
|
|
char *name = card[card_selected].name,
|
|
|
|
|
*chipset = card[card_selected].chipset;
|
|
|
|
|
|
|
|
|
|
printf("\nYour selected card definition:\n\n");
|
|
|
|
|
printf("Identifier: %s\n", name ? name : "-");
|
|
|
|
|
printf("Chipset: %s\n", chipset ? chipset : "-");
|
|
|
|
|
if (!card[card_selected].driver)
|
|
|
|
|
card[card_selected].driver = "unknown";
|
|
|
|
|
printf("Driver: %s\n", card[card_selected].driver);
|
|
|
|
|
|
|
|
|
|
if (card[card_selected].ramdac != NULL)
|
|
|
|
|
printf("Ramdac: %s\n", card[card_selected].ramdac);
|
|
|
|
|
if (card[card_selected].dacspeed != NULL)
|
|
|
|
|
printf("DacSpeed: %s\n", card[card_selected].dacspeed);
|
|
|
|
|
if (card[card_selected].clockchip != NULL)
|
|
|
|
|
printf("Clockchip: %s\n", card[card_selected].clockchip);
|
|
|
|
|
if (card[card_selected].flags & NOCLOCKPROBE)
|
|
|
|
|
printf("Do NOT probe clocks or use any Clocks line.\n");
|
|
|
|
|
if (card[card_selected].flags & UNSUPPORTED)
|
|
|
|
|
printf("%s", cardunsupported_text);
|
|
|
|
|
#if 0 /* Might be confusing. */
|
|
|
|
|
if (strlen(card[card_selected].lines) > 0)
|
|
|
|
|
printf("Device section text:\n%s",
|
|
|
|
|
card[card_selected].lines);
|
|
|
|
|
#endif
|
|
|
|
|
printf("\n");
|
|
|
|
|
keypress();
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Screen/video card configuration.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
static char *deviceintro_text =
|
|
|
|
|
"Now you must give information about your video card. This will be used for\n"
|
|
|
|
|
"the \"Device\" section of your video card in " CONFIGNAME ".\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static char *videomemoryintro_text =
|
|
|
|
|
"It is probably a good idea to use the same approximate amount as that detected\n"
|
|
|
|
|
"by the server you intend to use. If you encounter problems that are due to the\n"
|
|
|
|
|
"used server not supporting the amount memory you have, specify the maximum\n"
|
|
|
|
|
"amount supported by the server.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"How much video memory do you have on your video card:\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static char *carddescintro_text =
|
|
|
|
|
"You must now enter a few identification/description strings, namely an\n"
|
|
|
|
|
"identifier, a vendor name, and a model name. Just pressing enter will fill\n"
|
|
|
|
|
"in default names (possibly from a card definition).\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
#if 0
|
|
|
|
|
static char *devicesettingscomment_text =
|
|
|
|
|
"Especially for accelerated drivers, Ramdac, Dacspeed and ClockChip settings\n"
|
|
|
|
|
"or special options may be required in the Device section.\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static char *ramdaccomment_text =
|
|
|
|
|
"The RAMDAC setting only applies to some drivers. Some RAMDAC's are\n"
|
|
|
|
|
"auto-detected by the server. The detection of a RAMDAC is forced by using a\n"
|
|
|
|
|
"Ramdac \"identifier\" line in the Device section. The identifiers are shown\n"
|
|
|
|
|
"at the right of the following table of RAMDAC types:\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
#define NU_RAMDACS 24
|
|
|
|
|
|
|
|
|
|
static char *ramdac_name[NU_RAMDACS] = {
|
|
|
|
|
"AT&T 20C490 (S3 and AGX servers, ARK driver)",
|
|
|
|
|
"AT&T 20C498/21C498/22C498 (S3, autodetected)",
|
|
|
|
|
"AT&T 20C409/20C499 (S3, autodetected)",
|
|
|
|
|
"AT&T 20C505 (S3)",
|
|
|
|
|
"BrookTree BT481 (AGX)",
|
|
|
|
|
"BrookTree BT482 (AGX)",
|
|
|
|
|
"BrookTree BT485/9485 (S3)",
|
|
|
|
|
"Sierra SC15025 (S3, AGX)",
|
|
|
|
|
#if XFREE86_VERSION >= 311
|
|
|
|
|
"S3 GenDAC (86C708) (autodetected)",
|
|
|
|
|
"S3 SDAC (86C716) (autodetected)",
|
|
|
|
|
#else
|
|
|
|
|
"S3 GenDAC (86C708)",
|
|
|
|
|
"S3 SDAC (86C716)",
|
|
|
|
|
#endif
|
|
|
|
|
"STG-1700 (S3, autodetected)",
|
|
|
|
|
"STG-1703 (S3, autodetected)",
|
|
|
|
|
"TI 3020 (S3, autodetected)",
|
|
|
|
|
"TI 3025 (S3, autodetected)",
|
|
|
|
|
"TI 3026 (S3, autodetected)",
|
|
|
|
|
"IBM RGB 514 (S3, autodetected)",
|
|
|
|
|
"IBM RGB 524 (S3, autodetected)",
|
|
|
|
|
"IBM RGB 525 (S3, autodetected)",
|
|
|
|
|
"IBM RGB 526 (S3)",
|
|
|
|
|
"IBM RGB 528 (S3, autodetected)",
|
|
|
|
|
"ICS5342 (S3, ARK)",
|
|
|
|
|
"ICS5341 (W32)",
|
|
|
|
|
"IC Works w30C516 ZoomDac (ARK)",
|
|
|
|
|
"Normal DAC"
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static char *ramdac_id[NU_RAMDACS] = {
|
|
|
|
|
"att20c490", "att20c498", "att20c409", "att20c505", "bt481", "bt482",
|
|
|
|
|
"bt485", "sc15025", "s3gendac", "s3_sdac", "stg1700","stg1703",
|
|
|
|
|
"ti3020", "ti3025", "ti3026", "ibm_rgb514", "ibm_rgb524",
|
|
|
|
|
"ibm_rgb525", "ibm_rgb526", "ibm_rgb528", "ics5342", "ics5341",
|
|
|
|
|
"zoomdac", "normal"
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static char *clockchipcomment_text =
|
|
|
|
|
"A Clockchip line in the Device section forces the detection of a\n"
|
|
|
|
|
"programmable clock device. With a clockchip enabled, any required\n"
|
|
|
|
|
"clock can be programmed without requiring probing of clocks or a\n"
|
|
|
|
|
"Clocks line. Most cards don't have a programmable clock chip.\n"
|
|
|
|
|
"Choose from the following list:\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
#define NU_CLOCKCHIPS 12
|
|
|
|
|
|
|
|
|
|
static char *clockchip_name[] = {
|
|
|
|
|
"Chrontel 8391",
|
|
|
|
|
"ICD2061A and compatibles (ICS9161A, DCS2824)",
|
|
|
|
|
"ICS2595",
|
|
|
|
|
"ICS5342 (similar to SDAC, but not completely compatible)",
|
|
|
|
|
"ICS5341",
|
|
|
|
|
"S3 GenDAC (86C708) and ICS5300 (autodetected)",
|
|
|
|
|
"S3 SDAC (86C716)",
|
|
|
|
|
"STG 1703 (autodetected)",
|
|
|
|
|
"Sierra SC11412",
|
|
|
|
|
"TI 3025 (autodetected)",
|
|
|
|
|
"TI 3026 (autodetected)",
|
|
|
|
|
"IBM RGB 51x/52x (autodetected)",
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static char *clockchip_id[] = {
|
|
|
|
|
"ch8391", "icd2061a", "ics2595", "ics5342", "ics5341",
|
|
|
|
|
"s3gendac", "s3_sdac",
|
|
|
|
|
"stg1703", "sc11412", "ti3025", "ti3026", "ibm_rgb5xx",
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static char *deviceclockscomment_text =
|
|
|
|
|
"For most modern configurations, a Clocks line is neither required or\n"
|
|
|
|
|
"desirable. However for some older hardware it can be useful since it\n"
|
|
|
|
|
"prevents the slow and nasty sounding clock probing at server start-up.\n"
|
|
|
|
|
"Probed clocks are displayed at server startup, along with other server\n"
|
|
|
|
|
"and hardware configuration info. You can save this information in a file\n"
|
|
|
|
|
"by running 'X -probeonly 2>output_file'. Be warned that clock probing is\n"
|
|
|
|
|
"inherently imprecise; some clocks may be slightly too high (varies per run).\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static char *deviceclocksquestion_text =
|
|
|
|
|
"At this point I can run X -probeonly, and try to extract the clock information\n"
|
|
|
|
|
"from the output. It is recommended that you do this yourself and if a set of\n"
|
|
|
|
|
"clocks is shown then you add a clocks line (note that the list of clocks may\n"
|
|
|
|
|
"be split over multiple Clocks lines) to your Device section afterwards. Be\n"
|
|
|
|
|
"aware that a clocks line is not appropriate for most modern hardware that\n"
|
|
|
|
|
"has programmable clocks.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"You must be root to be able to run X -probeonly now.\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static char *probeonlywarning_text =
|
|
|
|
|
"It is possible that the hardware detection routines in the server will somehow\n"
|
|
|
|
|
"cause the system to crash and the screen to remain blank. If this is the\n"
|
|
|
|
|
"case, do not choose this option the next time. The server may need a\n"
|
|
|
|
|
"Ramdac, ClockChip or special option (e.g. \"nolinear\" for S3) to probe\n"
|
|
|
|
|
"and start-up correctly.\n"
|
|
|
|
|
"\n";
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
static char *modesorderintro_text =
|
|
|
|
|
"For each depth, a list of modes (resolutions) is defined. The default\n"
|
|
|
|
|
"resolution that the server will start-up with will be the first listed\n"
|
|
|
|
|
"mode that can be supported by the monitor and card.\n"
|
|
|
|
|
"Currently it is set to:\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static char *modesorder_text2 =
|
|
|
|
|
"Modes that cannot be supported due to monitor or clock constraints will\n"
|
|
|
|
|
"be automatically skipped by the server.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
" 1 Change the modes for 8-bit (256 colors)\n"
|
|
|
|
|
" 2 Change the modes for 16-bit (32K/64K colors)\n"
|
|
|
|
|
" 3 Change the modes for 24-bit (24-bit color)\n"
|
|
|
|
|
" 4 The modes are OK, continue.\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static char *modeslist_text =
|
|
|
|
|
"Please type the digits corresponding to the modes that you want to select.\n"
|
|
|
|
|
"For example, 432 selects \"1024x768\" \"800x600\" \"640x480\", with a\n"
|
|
|
|
|
"default mode of 1024x768.\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static char *virtual_text =
|
|
|
|
|
"You can have a virtual screen (desktop), which is screen area that is larger\n"
|
|
|
|
|
"than the physical screen and which is panned by moving the mouse to the edge\n"
|
|
|
|
|
"of the screen. If you don't want virtual desktop at a certain resolution,\n"
|
|
|
|
|
"you cannot have modes listed that are larger. Each color depth can have a\n"
|
|
|
|
|
"differently-sized virtual screen\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static int videomemory[] = {
|
|
|
|
|
256, 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536, 131072, 262144
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* Is this required? */
|
|
|
|
|
#if XFREE86_VERSION >= 400
|
|
|
|
|
#define NU_MODESTRINGS 13
|
|
|
|
|
#else
|
|
|
|
|
#if XFREE86_VERSION >= 330
|
|
|
|
|
#define NU_MODESTRINGS 12
|
|
|
|
|
#else
|
|
|
|
|
#if XFREE86_VERSION >= 311
|
|
|
|
|
#define NU_MODESTRINGS 8
|
|
|
|
|
#else
|
|
|
|
|
#define NU_MODESTRINGS 5
|
|
|
|
|
#endif
|
|
|
|
|
#endif
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
static char *modestring[NU_MODESTRINGS] = {
|
|
|
|
|
"\"640x400\"",
|
|
|
|
|
"\"640x480\"",
|
|
|
|
|
"\"800x600\"",
|
|
|
|
|
"\"1024x768\"",
|
|
|
|
|
"\"1280x1024\"",
|
|
|
|
|
#if XFREE86_VERSION >= 311
|
|
|
|
|
"\"320x200\"",
|
|
|
|
|
"\"320x240\"",
|
|
|
|
|
"\"400x300\""
|
|
|
|
|
#endif
|
|
|
|
|
#if XFREE86_VERSION >= 330
|
|
|
|
|
,"\"1152x864\"",
|
|
|
|
|
"\"1600x1200\"",
|
|
|
|
|
"\"1800x1400\"",
|
|
|
|
|
"\"512x384\""
|
|
|
|
|
#endif
|
|
|
|
|
#if XFREE86_VERSION >= 400
|
|
|
|
|
,"\"1400x1050\""
|
|
|
|
|
#endif
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
#ifdef __EMX__
|
|
|
|
|
/* yet another instance of this code, sigh! */
|
|
|
|
|
char *
|
|
|
|
|
__XOS2RedirRoot(char *path, char sep)
|
|
|
|
|
{
|
|
|
|
|
static char pn[300];
|
|
|
|
|
char *root;
|
|
|
|
|
int i,l;
|
|
|
|
|
if ((isalpha(path[0]) && path[1]==':') || path[0] != '/')
|
|
|
|
|
return path;
|
|
|
|
|
|
|
|
|
|
root = getenv("X11ROOT");
|
|
|
|
|
if (!root) root = "";
|
|
|
|
|
sprintf(pn,"%s%s",root,path);
|
|
|
|
|
if (sep=='\\') {
|
|
|
|
|
l = strlen(pn);
|
|
|
|
|
for (i=0; i<l; i++)
|
|
|
|
|
if (pn[i]=='/') pn[i]='\\';
|
|
|
|
|
}
|
|
|
|
|
return pn;
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/* (hv) to avoid the UNIXISM to try to open a dir to check for existance */
|
|
|
|
|
static int exists_dir(char *name) {
|
|
|
|
|
struct stat sbuf;
|
|
|
|
|
|
|
|
|
|
#ifdef __EMX__
|
|
|
|
|
name = __XOS2RedirRoot(name,'/');
|
|
|
|
|
#endif
|
|
|
|
|
/* is it there ? */
|
|
|
|
|
if (stat(name,&sbuf) == -1)
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
|
|
/* is there, but is it a dir? */
|
|
|
|
|
return S_ISDIR(sbuf.st_mode) ? 1 : 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
screen_configuration(void) {
|
|
|
|
|
int i, c/*, np*/;
|
|
|
|
|
char s[80];
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Configure the "Device" section for the video card.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
printf("%s", deviceintro_text);
|
|
|
|
|
|
|
|
|
|
printf("%s", videomemoryintro_text);
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < sizeof(videomemory) / sizeof(videomemory[0]); i++)
|
|
|
|
|
printf("%2d %dK\n", i + 1, videomemory[i]);
|
|
|
|
|
printf("%2d Other\n\n", i + 1);
|
|
|
|
|
|
|
|
|
|
printf("Enter your choice: ");
|
|
|
|
|
getstring(s);
|
|
|
|
|
printf("\n");
|
|
|
|
|
|
|
|
|
|
c = atoi(s) - 1;
|
|
|
|
|
if (c >= 0 && c < sizeof(videomemory) / sizeof(videomemory[0]))
|
|
|
|
|
config_videomemory = videomemory[c];
|
|
|
|
|
else {
|
|
|
|
|
printf("Amount of video memory in Kbytes: ");
|
|
|
|
|
getstring(s);
|
|
|
|
|
config_videomemory = atoi(s);
|
|
|
|
|
printf("\n");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
printf("%s", carddescintro_text);
|
|
|
|
|
if (card_selected != -1)
|
|
|
|
|
printf("Your card definition is %s.\n\n",
|
|
|
|
|
card[card_selected].name);
|
|
|
|
|
printf("The strings are free-form, spaces are allowed.\n");
|
|
|
|
|
printf("Enter an identifier for your video card definition: ");
|
|
|
|
|
getstring(s);
|
|
|
|
|
if (strlen(s) == 0)
|
|
|
|
|
if (card_selected != -1)
|
|
|
|
|
config_deviceidentifier = card[card_selected].name;
|
|
|
|
|
else
|
|
|
|
|
config_deviceidentifier = "My Video Card";
|
|
|
|
|
else {
|
|
|
|
|
config_deviceidentifier = Malloc(strlen(s) + 1);
|
|
|
|
|
strcpy(config_deviceidentifier, s);
|
|
|
|
|
}
|
|
|
|
|
printf("\n");
|
|
|
|
|
|
|
|
|
|
emptylines();
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Initialize screen mode variables for svga and accel
|
|
|
|
|
* to default values.
|
|
|
|
|
* XXXX Doesn't leave room for off-screen caching in 16/32bpp modes
|
|
|
|
|
* for the accelerated servers in some situations.
|
|
|
|
|
*/
|
|
|
|
|
config_modesline8bpp =
|
|
|
|
|
config_modesline16bpp =
|
|
|
|
|
config_modesline24bpp = "\"640x480\"";
|
|
|
|
|
config_virtualx8bpp = config_virtualx16bpp = config_virtualx24bpp =
|
|
|
|
|
config_virtualy8bpp = config_virtualy16bpp = config_virtualy24bpp = 0;
|
|
|
|
|
if (config_videomemory >= 4096) {
|
|
|
|
|
config_virtualx8bpp = 1600;
|
|
|
|
|
config_virtualy8bpp = 1280;
|
|
|
|
|
if (card_selected != -1 && !(card[card_selected].flags & UNSUPPORTED)) {
|
|
|
|
|
/*
|
|
|
|
|
* Allow room for font/pixmap cache for accel
|
|
|
|
|
* servers.
|
|
|
|
|
*/
|
|
|
|
|
config_virtualx16bpp = 1280;
|
|
|
|
|
config_virtualy16bpp = 1024;
|
|
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
config_virtualx16bpp = 1600;
|
|
|
|
|
config_virtualy16bpp = 1280;
|
|
|
|
|
}
|
|
|
|
|
if (card_selected != -1 && !(card[card_selected].flags & UNSUPPORTED)) {
|
|
|
|
|
config_virtualx24bpp = 1152;
|
|
|
|
|
config_virtualy24bpp = 900;
|
|
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
config_virtualx24bpp = 1280;
|
|
|
|
|
config_virtualy24bpp = 1024;
|
|
|
|
|
}
|
|
|
|
|
/* Add 1600x1280 */
|
|
|
|
|
config_modesline8bpp = "\"1280x1024\" \"1024x768\" \"800x600\" \"640x480\"";
|
|
|
|
|
config_modesline16bpp = "\"1280x1024\" \"1024x768\" \"800x600\" \"640x480\"";
|
|
|
|
|
config_modesline24bpp = "\"1280x1024\" \"1024x768\" \"800x600\" \"640x480\"";
|
|
|
|
|
|
|
|
|
|
}
|
|
|
|
|
else
|
|
|
|
|
if (config_videomemory >= 2048) {
|
|
|
|
|
if (card_selected != -1 && !(card[card_selected].flags & UNSUPPORTED)) {
|
|
|
|
|
/*
|
|
|
|
|
* Allow room for font/pixmap cache for accel
|
|
|
|
|
* servers.
|
|
|
|
|
* Also the mach32 is has a limited width.
|
|
|
|
|
*/
|
|
|
|
|
config_virtualx8bpp = 1280;
|
|
|
|
|
config_virtualy8bpp = 1024;
|
|
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
config_virtualx8bpp = 1600;
|
|
|
|
|
config_virtualy8bpp = 1200;
|
|
|
|
|
}
|
|
|
|
|
if (card_selected != -1 && !(card[card_selected].flags & UNSUPPORTED)) {
|
|
|
|
|
config_virtualx16bpp = 1024;
|
|
|
|
|
config_virtualy16bpp = 768;
|
|
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
config_virtualx16bpp = 1152;
|
|
|
|
|
config_virtualy16bpp = 900;
|
|
|
|
|
}
|
|
|
|
|
config_virtualx24bpp = 800;
|
|
|
|
|
config_virtualy24bpp = 600;
|
|
|
|
|
if (config_videomemory >= 2048 + 256) {
|
|
|
|
|
config_virtualx24bpp = 1024;
|
|
|
|
|
config_virtualy24bpp = 768;
|
|
|
|
|
}
|
|
|
|
|
config_modesline8bpp = "\"1280x1024\" \"1024x768\" \"800x600\" \"640x480\"";
|
|
|
|
|
config_modesline16bpp = "\"1024x768\" \"800x600\" \"640x480\"";
|
|
|
|
|
if (config_videomemory >= 2048 + 256)
|
|
|
|
|
config_modesline24bpp = "\"1024x768\" \"800x600\" \"640x480\"";
|
|
|
|
|
else
|
|
|
|
|
config_modesline24bpp = "\"800x600\" \"640x480\"";
|
|
|
|
|
}
|
|
|
|
|
else
|
|
|
|
|
if (config_videomemory >= 1024) {
|
|
|
|
|
if (card_selected != -1 && !(card[card_selected].flags & UNSUPPORTED)) {
|
|
|
|
|
/*
|
|
|
|
|
* Allow room for font/pixmap cache for accel
|
|
|
|
|
* servers.
|
|
|
|
|
*/
|
|
|
|
|
config_virtualx8bpp = 1024;
|
|
|
|
|
config_virtualy8bpp = 768;
|
|
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
config_virtualx8bpp = 1152;
|
|
|
|
|
config_virtualy8bpp = 900;
|
|
|
|
|
}
|
|
|
|
|
config_virtualx16bpp = 800; /* Forget about cache space; */
|
|
|
|
|
config_virtualy16bpp = 600; /* it's small enough as it is. */
|
|
|
|
|
config_virtualx24bpp = 640;
|
|
|
|
|
config_virtualy24bpp = 480;
|
|
|
|
|
config_modesline8bpp = "\"1024x768\" \"800x600\" \"640x480\"";
|
|
|
|
|
config_modesline16bpp = "\"800x600\" \"640x480\"";
|
|
|
|
|
config_modesline24bpp = "\"640x480\"";
|
|
|
|
|
}
|
|
|
|
|
else
|
|
|
|
|
if (config_videomemory >= 512) {
|
|
|
|
|
config_virtualx8bpp = 800;
|
|
|
|
|
config_virtualy8bpp = 600;
|
|
|
|
|
config_modesline8bpp = "\"800x600\" \"640x480\"";
|
|
|
|
|
config_modesline16bpp = "\"640x400\"";
|
|
|
|
|
}
|
|
|
|
|
else
|
|
|
|
|
if (config_videomemory >= 256) {
|
|
|
|
|
config_modesline8bpp = "\"640x400\"";
|
|
|
|
|
config_virtualx8bpp = 640;
|
|
|
|
|
config_virtualy8bpp = 400;
|
|
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
printf("Invalid amount of video memory. Please try again\n");
|
|
|
|
|
return(1);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#if 0
|
|
|
|
|
/*
|
|
|
|
|
* Handle the Ramdac/Clockchip setting.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
printf("%s", devicesettingscomment_text);
|
|
|
|
|
|
|
|
|
|
if (card_selected == -1 || (card[card_selected].flags & UNSUPPORTED))
|
|
|
|
|
goto skipramdacselection;
|
|
|
|
|
|
|
|
|
|
printf("%s", ramdaccomment_text);
|
|
|
|
|
|
|
|
|
|
/* meanwhile there are so many RAMDACs that they do no longer fit on
|
|
|
|
|
* on page
|
|
|
|
|
*/
|
|
|
|
|
for (np=12, i=0 ;;) {
|
|
|
|
|
int j;
|
|
|
|
|
for (j = i; j < i + np && j < NU_RAMDACS; j++)
|
|
|
|
|
printf("%3d %-60s%s\n", j+1,
|
|
|
|
|
ramdac_name[j],
|
|
|
|
|
ramdac_id[j]);
|
|
|
|
|
|
|
|
|
|
printf("\n");
|
|
|
|
|
if (card_selected != -1)
|
|
|
|
|
if (card[card_selected].ramdac != NULL)
|
|
|
|
|
printf("The card definition has Ramdac \"%s\".\n\n",
|
|
|
|
|
card[card_selected].ramdac);
|
|
|
|
|
printf("\n");
|
|
|
|
|
printf("Enter a number to choose the corresponding RAMDAC.\n");
|
|
|
|
|
printf("Press enter for the next page, q to quit without selection of a RAMDAC.\n");
|
|
|
|
|
printf("\n");
|
|
|
|
|
getstring(s);
|
|
|
|
|
|
|
|
|
|
config_ramdac = NULL;
|
|
|
|
|
if (s[0] == 'q')
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
if (strlen(s) > 0) {
|
|
|
|
|
c = atoi(s)-1;
|
|
|
|
|
if (c >= 0 && c < NU_RAMDACS) {
|
|
|
|
|
config_ramdac = ramdac_id[atoi(s)-1];
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
i += np;
|
|
|
|
|
if (np==12) np = 18; /* account intro lines only displayed 1st time */
|
|
|
|
|
if (i >= NU_RAMDACS)
|
|
|
|
|
i = 0;
|
|
|
|
|
emptylines();
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
skipramdacselection:
|
|
|
|
|
emptylines();
|
|
|
|
|
printf("%s", clockchipcomment_text);
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < NU_CLOCKCHIPS; i++)
|
|
|
|
|
printf("%2d %-60s%s\n",
|
|
|
|
|
i + 1, clockchip_name[i], clockchip_id[i]);
|
|
|
|
|
|
|
|
|
|
printf("\n");
|
|
|
|
|
|
|
|
|
|
if (card_selected != -1)
|
|
|
|
|
if (card[card_selected].clockchip != NULL)
|
|
|
|
|
printf("The card definition has Clockchip \"%s\"\n\n",
|
|
|
|
|
card[card_selected].clockchip);
|
|
|
|
|
|
|
|
|
|
printf("Just press enter if you don't want a Clockchip setting.\n");
|
|
|
|
|
printf("What Clockchip setting do you want (1-%d)? ", NU_CLOCKCHIPS);
|
|
|
|
|
|
|
|
|
|
getstring(s);
|
|
|
|
|
config_clockchip = NULL;
|
|
|
|
|
if (strlen(s) > 0)
|
|
|
|
|
config_clockchip = clockchip_id[atoi(s) - 1];
|
|
|
|
|
|
|
|
|
|
emptylines();
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Optionally run X -probeonly to figure out the clocks.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
config_numberofclockslines = 0;
|
|
|
|
|
|
|
|
|
|
printf("%s", deviceclockscomment_text);
|
|
|
|
|
|
|
|
|
|
printf("%s", deviceclocksquestion_text);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if 0
|
|
|
|
|
/*
|
|
|
|
|
* XXX Change this to check for a CLOCKPROBE flag rather than an
|
|
|
|
|
* NOCLOCKPROBE.
|
|
|
|
|
*/
|
|
|
|
|
if (card_selected != -1)
|
|
|
|
|
if (card[card_selected].flags & NOCLOCKPROBE)
|
|
|
|
|
printf("The card definition says to NOT probe clocks.\n");
|
|
|
|
|
|
|
|
|
|
if (config_clockchip != NULL) {
|
|
|
|
|
printf("Because you have enabled a Clockchip line, there's no need for clock\n"
|
|
|
|
|
"probing.\n");
|
|
|
|
|
keypress();
|
|
|
|
|
goto skipclockprobing;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
printf("Do you want me to run 'X -probeonly' now? ");
|
|
|
|
|
getstring(s);
|
|
|
|
|
printf("\n");
|
|
|
|
|
if (answerisyes(s)) {
|
|
|
|
|
/*
|
|
|
|
|
* Write temporary XF86Config and run X -probeonly.
|
|
|
|
|
* Only allow when root.
|
|
|
|
|
*/
|
|
|
|
|
FILE *f;
|
|
|
|
|
char *buf;
|
|
|
|
|
char syscmdline[2*256+100]; /* enough */
|
|
|
|
|
char *fname = NULL;
|
|
|
|
|
char *d2name = NULL;
|
|
|
|
|
char *d3name = NULL;
|
|
|
|
|
|
|
|
|
|
if (getuid() != 0) {
|
|
|
|
|
printf("Sorry, you must be root to do this.\n\n");
|
|
|
|
|
goto endofprobeonly;
|
|
|
|
|
}
|
|
|
|
|
printf("%s", probeonlywarning_text);
|
|
|
|
|
keypress();
|
|
|
|
|
fname = Malloc(strlen(temp_dir) +
|
|
|
|
|
strlen(TEMPORARY_XF86CONFIG_FILENAME) + 1);
|
|
|
|
|
sprintf(fname, "%s%s", temp_dir,
|
|
|
|
|
TEMPORARY_XF86CONFIG_FILENAME);
|
|
|
|
|
d2name = Malloc(strlen(temp_dir) + strlen(DUMBCONFIG2) + 1);
|
|
|
|
|
sprintf(d2name, "%s%s", temp_dir, DUMBCONFIG2);
|
|
|
|
|
d3name = Malloc(strlen(temp_dir) + strlen(DUMBCONFIG3) + 1);
|
|
|
|
|
sprintf(d3name, "%s%s", temp_dir, DUMBCONFIG3);
|
|
|
|
|
printf("Running X -probeonly -pn -xf86config %s.\n", fname);
|
|
|
|
|
write_XF86Config(fname);
|
|
|
|
|
#ifndef __EMX__
|
|
|
|
|
sync();
|
|
|
|
|
#endif
|
|
|
|
|
/* compose a line with the real path */
|
|
|
|
|
#ifndef __EMX__
|
|
|
|
|
sprintf(syscmdline, "X -probeonly -pn -xf86config %s 2> %s",
|
|
|
|
|
fname, d2name);
|
|
|
|
|
#else
|
|
|
|
|
/* OS/2 does not have symlinks, so "X" does not exist,
|
|
|
|
|
* call the real X server
|
|
|
|
|
*/
|
|
|
|
|
sprintf(syscmdline,"%s/"__XSERVERNAME__" -probeonly -pn -xf86config "
|
|
|
|
|
TEMPORARY_XF86CONFIG_FILENAME " 2>" DUMBCONFIG2,
|
|
|
|
|
__XOS2RedirRoot("/"__XSERVERNAME__"/bin",'\\'),
|
|
|
|
|
card[card_selected].server);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
if (system(syscmdline)) {
|
|
|
|
|
printf("X -probeonly call failed.\n");
|
|
|
|
|
printf("No Clocks line inserted.\n");
|
|
|
|
|
goto clocksprobefailed;
|
|
|
|
|
}
|
|
|
|
|
/* Look for 'clocks:' (case sensitive). */
|
|
|
|
|
sprintf(syscmdline, "grep clocks\\: %s > %s", d2name, d3name);
|
|
|
|
|
if (system(syscmdline)) {
|
|
|
|
|
printf("grep failed.\n");
|
|
|
|
|
printf("Cannot find clocks in server output.\n");
|
|
|
|
|
goto clocksprobefailed;
|
|
|
|
|
}
|
|
|
|
|
f = fopen(d3name, "r");
|
|
|
|
|
buf = Malloc(8192);
|
|
|
|
|
/* Parse lines. */
|
|
|
|
|
while (fgets(buf, 8192, f) != NULL) {
|
|
|
|
|
char *clks;
|
|
|
|
|
clks = strstr(buf, "clocks: ") + 8;
|
|
|
|
|
if (clks >= buf + 3 && strcmp(clks - 11, "num") == 0)
|
|
|
|
|
/* Reject lines with 'numclocks:'. */
|
|
|
|
|
continue;
|
|
|
|
|
if (clks >= buf + 8 && strcpy(clks - 14, "pixel ") == 0)
|
|
|
|
|
/* Reject lines with 'pixel clocks:'. */
|
|
|
|
|
continue;
|
|
|
|
|
clks[strlen(clks) - 1] = '\0'; /* Remove '\n'. */
|
|
|
|
|
config_clocksline[config_numberofclockslines] =
|
|
|
|
|
Malloc(strlen(clks) + 1);
|
|
|
|
|
strcpy(config_clocksline[config_numberofclockslines],
|
|
|
|
|
clks);
|
|
|
|
|
printf("Clocks %s\n", clks);
|
|
|
|
|
config_numberofclockslines++;
|
|
|
|
|
}
|
|
|
|
|
fclose(f);
|
|
|
|
|
clocksprobefailed:
|
|
|
|
|
unlink(d3name);
|
|
|
|
|
unlink(d2name);
|
|
|
|
|
unlink(fname);
|
|
|
|
|
printf("\n");
|
|
|
|
|
|
|
|
|
|
endofprobeonly:
|
|
|
|
|
keypress();
|
|
|
|
|
}
|
|
|
|
|
skipclockprobing:
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* For vga driver, no further configuration is required.
|
|
|
|
|
*/
|
|
|
|
|
if (card_selected == -1 || (card[card_selected].flags & UNSUPPORTED))
|
|
|
|
|
return (0);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Configure the modes order.
|
|
|
|
|
*/
|
|
|
|
|
config_virtual = 0;
|
|
|
|
|
for (;;) {
|
|
|
|
|
char modes[128];
|
|
|
|
|
|
|
|
|
|
emptylines();
|
|
|
|
|
|
|
|
|
|
printf("%s", modesorderintro_text);
|
|
|
|
|
printf("%s for 8-bit\n", config_modesline8bpp);
|
|
|
|
|
printf("%s for 16-bit\n", config_modesline16bpp);
|
|
|
|
|
printf("%s for 24-bit\n", config_modesline24bpp);
|
|
|
|
|
printf("\n");
|
|
|
|
|
printf("%s", modesorder_text2);
|
|
|
|
|
|
|
|
|
|
printf("Enter your choice: ");
|
|
|
|
|
getstring(s);
|
|
|
|
|
printf("\n");
|
|
|
|
|
|
|
|
|
|
c = atoi(s) - 1;
|
|
|
|
|
if (c < 0 || c >= 3)
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
printf("Select modes from the following list:\n\n");
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < NU_MODESTRINGS; i++)
|
|
|
|
|
printf(" %c %s\n", i < 9 ? '1' + i :
|
|
|
|
|
'a' + i - 9,
|
|
|
|
|
modestring[i]);
|
|
|
|
|
printf("\n");
|
|
|
|
|
|
|
|
|
|
printf("%s", modeslist_text);
|
|
|
|
|
|
|
|
|
|
printf("Which modes? ");
|
|
|
|
|
getstring(s);
|
|
|
|
|
printf("\n");
|
|
|
|
|
|
|
|
|
|
modes[0] = '\0';
|
|
|
|
|
for (i = 0; i < strlen(s); i++) {
|
|
|
|
|
if ( NU_MODESTRINGS > 9 ) {
|
|
|
|
|
if ((s[i] < '1' || s[i] > '9') &&
|
|
|
|
|
(s[i] < 'a' || s[i] > 'a' + NU_MODESTRINGS - 10)) {
|
|
|
|
|
printf("Invalid mode skipped.\n");
|
|
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
if (s[i] < '1' || s[i] > '0' + NU_MODESTRINGS) {
|
|
|
|
|
printf("Invalid mode skipped.\n");
|
|
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
if (i > 0)
|
|
|
|
|
strcat(modes, " ");
|
|
|
|
|
strcat(modes, modestring[s[i] <= '9' ? s[i] - '1' :
|
|
|
|
|
s[i] - 'a' + 9]);
|
|
|
|
|
}
|
|
|
|
|
switch (c) {
|
|
|
|
|
case 0 :
|
|
|
|
|
config_modesline8bpp = Malloc(strlen(modes) + 1);
|
|
|
|
|
strcpy(config_modesline8bpp, modes);
|
|
|
|
|
break;
|
|
|
|
|
case 1 :
|
|
|
|
|
config_modesline16bpp = Malloc(strlen(modes) + 1);
|
|
|
|
|
strcpy(config_modesline16bpp, modes);
|
|
|
|
|
break;
|
|
|
|
|
case 2 :
|
|
|
|
|
config_modesline24bpp = Malloc(strlen(modes) + 1);
|
|
|
|
|
strcpy(config_modesline24bpp, modes);
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
printf("%s", virtual_text);
|
|
|
|
|
|
|
|
|
|
printf("Please answer the following question with either 'y' or 'n'.\n");
|
|
|
|
|
printf("Do you want a virtual screen that is larger than the physical screen?");
|
|
|
|
|
getstring(s);
|
|
|
|
|
if (answerisyes(s))
|
|
|
|
|
config_virtual = 1;
|
|
|
|
|
}
|
|
|
|
|
return(0);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static char *defaultdepthtext =
|
|
|
|
|
"Please specify which color depth you want to use by default:\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static struct depth_str {
|
|
|
|
|
char *name;
|
|
|
|
|
char *desc;
|
|
|
|
|
} depth_list[] = {
|
|
|
|
|
{ "1", "1 bit (monochrome)" },
|
|
|
|
|
{ "4", "4 bits (16 colors)" },
|
|
|
|
|
{ "8", "8 bits (256 colors)" },
|
|
|
|
|
{ "16", "16 bits (65536 colors)" },
|
|
|
|
|
{ "24", "24 bits (16 million colors)" }
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static int ndepths = sizeof(depth_list)/sizeof(struct depth_str);
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
depth_configuration(void)
|
|
|
|
|
{
|
|
|
|
|
int i;
|
|
|
|
|
char s[80];
|
|
|
|
|
int depth;
|
|
|
|
|
|
|
|
|
|
printf(defaultdepthtext);
|
|
|
|
|
for (i=0; i<ndepths; i++) {
|
|
|
|
|
printf("%3d %-50s\n",i+1,depth_list[i].desc);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
printf("\nEnter a number to choose the default depth.\n\n");
|
|
|
|
|
getstring(s);
|
|
|
|
|
if (strlen(s) == 0)
|
|
|
|
|
depth = 0;
|
|
|
|
|
else {
|
|
|
|
|
i = atoi(s)-1;
|
|
|
|
|
depth = (i < 0 || i > ndepths) ? 0 : i;
|
|
|
|
|
}
|
|
|
|
|
config_depth = depth_list[depth].name;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Create the XF86Config file.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
static char *XF86Config_firstchunk_text =
|
|
|
|
|
"# File generated by xorgconfig.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"#\n"
|
|
|
|
|
"# Copyright 2004 "XVENDORNAME"\n"
|
|
|
|
|
"#\n"
|
|
|
|
|
"# Permission is hereby granted, free of charge, to any person obtaining a\n"
|
|
|
|
|
"# copy of this software and associated documentation files (the \"Software\"),\n"
|
|
|
|
|
"# to deal in the Software without restriction, including without limitation\n"
|
|
|
|
|
"# the rights to use, copy, modify, merge, publish, distribute, sublicense,\n"
|
|
|
|
|
"# and/or sell copies of the Software, and to permit persons to whom the\n"
|
|
|
|
|
"# Software is furnished to do so, subject to the following conditions:\n"
|
|
|
|
|
"# \n"
|
|
|
|
|
"# The above copyright notice and this permission notice shall be included in\n"
|
|
|
|
|
"# all copies or substantial portions of the Software.\n"
|
|
|
|
|
"# \n"
|
|
|
|
|
"# THE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR\n"
|
|
|
|
|
"# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\n"
|
|
|
|
|
"# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL\n"
|
|
|
|
|
"# "XVENDORNAME" BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,\n"
|
|
|
|
|
"# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF\n"
|
|
|
|
|
"# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE\n"
|
|
|
|
|
"# SOFTWARE.\n"
|
|
|
|
|
"# \n"
|
|
|
|
|
"# Except as contained in this notice, the name of "XVENDORNAME" shall\n"
|
|
|
|
|
"# not be used in advertising or otherwise to promote the sale, use or other\n"
|
|
|
|
|
"# dealings in this Software without prior written authorization from\n"
|
|
|
|
|
"# "XVENDORNAME".\n"
|
|
|
|
|
"#\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# **********************************************************************\n"
|
|
|
|
|
"# Refer to the " CONFIGNAME "(" FILEMANSUFFIX ") man page for details about the format of \n"
|
|
|
|
|
"# this file.\n"
|
|
|
|
|
"# **********************************************************************\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# **********************************************************************\n"
|
|
|
|
|
"# Module section -- this section is used to specify\n"
|
|
|
|
|
"# which dynamically loadable modules to load.\n"
|
|
|
|
|
"# **********************************************************************\n"
|
|
|
|
|
"#\n"
|
|
|
|
|
"Section \"Module\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# This loads the DBE extension module.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
" Load \"dbe\" # Double buffer extension\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# This loads the miscellaneous extensions module, and disables\n"
|
|
|
|
|
"# initialisation of the XFree86-DGA extension within that module.\n"
|
|
|
|
|
" SubSection \"extmod\"\n"
|
|
|
|
|
" Option \"omit xfree86-dga\" # don't initialise the DGA extension\n"
|
|
|
|
|
" EndSubSection\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# This loads the font modules\n"
|
|
|
|
|
#ifdef HAS_TYPE1
|
|
|
|
|
" Load \"type1\"\n"
|
|
|
|
|
#else
|
|
|
|
|
"# Load \"type1\"\n"
|
|
|
|
|
#endif
|
|
|
|
|
" Load \"freetype\"\n"
|
|
|
|
|
"# Load \"xtt\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# This loads the GLX module\n"
|
|
|
|
|
"# Load \"glx\"\n"
|
|
|
|
|
"# This loads the DRI module\n"
|
|
|
|
|
"# Load \"dri\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"EndSection\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# **********************************************************************\n"
|
|
|
|
|
"# Files section. This allows default font and rgb paths to be set\n"
|
|
|
|
|
"# **********************************************************************\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"Section \"Files\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# The location of the RGB database. Note, this is the name of the\n"
|
|
|
|
|
"# file minus the extension (like \".txt\" or \".db\"). There is normally\n"
|
|
|
|
|
"# no need to change the default.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# RgbPath \"" TREEROOTSHARE "/rgb\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Multiple FontPath entries are allowed (which are concatenated together),\n"
|
|
|
|
|
"# as well as specifying multiple comma-separated entries in one FontPath\n"
|
|
|
|
|
"# command (or a combination of both methods)\n"
|
|
|
|
|
"# \n"
|
|
|
|
|
#if 0
|
|
|
|
|
"# If you don't have a floating point coprocessor and emacs, Mosaic or other\n"
|
|
|
|
|
"# programs take long to start up, try moving the Type1 directory\n"
|
|
|
|
|
"# to the end of this list (or comment it out).\n"
|
|
|
|
|
#endif
|
|
|
|
|
"# \n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static char *XF86Config_fontpaths[] =
|
|
|
|
|
{
|
|
|
|
|
/* " FontPath \"" TREEROOTFONT "/75dpi/\"\n"*/
|
|
|
|
|
"/local/",
|
|
|
|
|
"/misc/",
|
|
|
|
|
"/75dpi/:unscaled",
|
|
|
|
|
"/100dpi/:unscaled",
|
|
|
|
|
"/Speedo/",
|
|
|
|
|
"/Type1/",
|
|
|
|
|
"/TrueType/",
|
|
|
|
|
"/freefont/",
|
|
|
|
|
"/75dpi/",
|
|
|
|
|
"/100dpi/",
|
|
|
|
|
0 /* end of fontpaths */
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static char *XF86Config_fontpathchunk_text =
|
|
|
|
|
|
|
|
|
|
"\n"
|
|
|
|
|
"# The module search path. The default path is shown here.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# ModulePath \"" MODULEPATH "\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"EndSection\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# **********************************************************************\n"
|
|
|
|
|
"# Server flags section.\n"
|
|
|
|
|
"# **********************************************************************\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"Section \"ServerFlags\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Uncomment this to cause a core dump at the spot where a signal is \n"
|
|
|
|
|
"# received. This may leave the console in an unusable state, but may\n"
|
|
|
|
|
"# provide a better stack trace in the core dump to aid in debugging\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Option \"NoTrapSignals\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence\n"
|
|
|
|
|
"# (where n is 1 through 12). This allows clients to receive these key\n"
|
|
|
|
|
"# events.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Option \"DontVTSwitch\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence\n"
|
|
|
|
|
"# This allows clients to receive this key event.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Option \"DontZap\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching\n"
|
|
|
|
|
"# sequences. This allows clients to receive these key events.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Option \"Dont Zoom\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Uncomment this to disable tuning with the xvidtune client. With\n"
|
|
|
|
|
"# it the client can still run and fetch card and monitor attributes,\n"
|
|
|
|
|
"# but it will not be allowed to change them. If it tries it will\n"
|
|
|
|
|
"# receive a protocol error.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Option \"DisableVidModeExtension\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Uncomment this to enable the use of a non-local xvidtune client. \n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Option \"AllowNonLocalXvidtune\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Uncomment this to disable dynamically modifying the input device\n"
|
|
|
|
|
"# (mouse and keyboard) settings. \n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Option \"DisableModInDev\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Uncomment this to enable the use of a non-local client to\n"
|
|
|
|
|
"# change the keyboard or mouse settings (currently only xset).\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Option \"AllowNonLocalModInDev\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"EndSection\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# **********************************************************************\n"
|
|
|
|
|
"# Input devices\n"
|
|
|
|
|
"# **********************************************************************\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# **********************************************************************\n"
|
|
|
|
|
"# Core keyboard's InputDevice section\n"
|
|
|
|
|
"# **********************************************************************\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"Section \"InputDevice\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
" Identifier \"Keyboard1\"\n"
|
|
|
|
|
#ifdef USE_DEPRECATED_KEYBOARD_DRIVER
|
|
|
|
|
" Driver \"Keyboard\"\n"
|
|
|
|
|
#else
|
|
|
|
|
" Driver \"kbd\"\n"
|
|
|
|
|
#endif
|
|
|
|
|
"\n"
|
|
|
|
|
"# For most OSs the protocol can be omitted (it defaults to \"Standard\").\n"
|
|
|
|
|
"# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),\n"
|
|
|
|
|
"# uncomment the following line.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Option \"Protocol\" \"Xqueue\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
" Option \"AutoRepeat\" \"500 30\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))\n"
|
|
|
|
|
"# Option \"Xleds\" \"1 2 3\"\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static char *keyboardchunk2_text =
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static char *keyboardchunk3_text =
|
|
|
|
|
"# To customise the XKB settings to suit your keyboard, modify the\n"
|
|
|
|
|
"# lines below (which are the defaults). For example, for a non-U.S.\n"
|
|
|
|
|
"# keyboard, you will probably want to use:\n"
|
|
|
|
|
"# Option \"XkbModel\" \"pc105\"\n"
|
|
|
|
|
"# If you have a US Microsoft Natural keyboard, you can use:\n"
|
|
|
|
|
"# Option \"XkbModel\" \"microsoft\"\n"
|
|
|
|
|
"#\n"
|
|
|
|
|
"# Then to change the language, change the Layout setting.\n"
|
|
|
|
|
"# For example, a german layout can be obtained with:\n"
|
|
|
|
|
"# Option \"XkbLayout\" \"de\"\n"
|
|
|
|
|
"# or:\n"
|
|
|
|
|
"# Option \"XkbLayout\" \"de\"\n"
|
|
|
|
|
"# Option \"XkbVariant\" \"nodeadkeys\"\n"
|
|
|
|
|
"#\n"
|
|
|
|
|
"# If you'd like to switch the positions of your capslock and\n"
|
|
|
|
|
"# control keys, use:\n"
|
|
|
|
|
"# Option \"XkbOptions\" \"ctrl:swapcaps\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# These are the default XKB settings for "__XSERVERNAME__"\n"
|
|
|
|
|
"# Option \"XkbRules\" \""__XKBDEFRULES__"\"\n"
|
|
|
|
|
"# Option \"XkbModel\" \"pc105\"\n"
|
|
|
|
|
"# Option \"XkbLayout\" \"us\"\n"
|
|
|
|
|
"# Option \"XkbVariant\" \"\"\n"
|
|
|
|
|
"# Option \"XkbOptions\" \"\"\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static char *keyboardlastchunk_text =
|
|
|
|
|
"\n"
|
|
|
|
|
"EndSection\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static char *pointersection_text1 =
|
|
|
|
|
"# **********************************************************************\n"
|
|
|
|
|
"# Core Pointer's InputDevice section\n"
|
|
|
|
|
"# **********************************************************************\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"Section \"InputDevice\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Identifier and driver\n"
|
|
|
|
|
"\n"
|
|
|
|
|
#if defined(__UNIXWARE__) || defined(XQUEUE)
|
|
|
|
|
"# Identifier \"Mouse1\"\n"
|
|
|
|
|
"# Driver \"mouse\"\n"
|
|
|
|
|
#else
|
|
|
|
|
" Identifier \"Mouse1\"\n"
|
|
|
|
|
" Driver \"mouse\"\n"
|
|
|
|
|
#endif
|
|
|
|
|
;
|
|
|
|
|
|
|
|
|
|
static char *pointersection_text2 =
|
|
|
|
|
"\n"
|
|
|
|
|
"# When using XQUEUE, comment out the above two lines, and uncomment\n"
|
|
|
|
|
"# the following line.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
#if defined(__UNIXWARE__) || defined(XQUEUE)
|
|
|
|
|
" Option \"Protocol\" \"Xqueue\"\n"
|
|
|
|
|
#else
|
|
|
|
|
"# Option \"Protocol\" \"Xqueue\"\n"
|
|
|
|
|
#endif
|
|
|
|
|
"\n"
|
|
|
|
|
"# Mouse-speed setting for PS/2 mouse.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Option \"Resolution\" \"256\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Baudrate and SampleRate are only for some Logitech mice. In\n"
|
|
|
|
|
"# almost every case these lines should be omitted.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Option \"BaudRate\" \"9600\"\n"
|
|
|
|
|
"# Option \"SampleRate\" \"150\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,\n"
|
|
|
|
|
"# horizontal wheel to buttons 6 & 7. Change if your mouse has more than\n"
|
|
|
|
|
"# 3 buttons and you need to map the wheel to different button ids to avoid\n"
|
|
|
|
|
"# conflicts.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
" Option \"ZAxisMapping\" \"4 5 6 7\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Emulate3Buttons is an option for 2-button mice\n"
|
|
|
|
|
"# Emulate3Timeout is the timeout in milliseconds (default is 50ms)\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static char *xinputsection_text =
|
|
|
|
|
"# **********************************************************************\n"
|
|
|
|
|
"# Other input device sections \n"
|
|
|
|
|
"# this is optional and is required only if you\n"
|
|
|
|
|
"# are using extended input devices. This is for example only. Refer\n"
|
|
|
|
|
"# to the " CONFIGNAME " man page for a description of the options.\n"
|
|
|
|
|
"# **********************************************************************\n"
|
|
|
|
|
"#\n"
|
|
|
|
|
"# Section \"InputDevice\" \n"
|
|
|
|
|
"# Identifier \"Mouse2\"\n"
|
|
|
|
|
"# Driver \"mouse\"\n"
|
|
|
|
|
"# Option \"Protocol\" \"MouseMan\"\n"
|
|
|
|
|
"# Option \"Device\" \"/dev/mouse2\"\n"
|
|
|
|
|
"# EndSection\n"
|
|
|
|
|
"#\n"
|
|
|
|
|
"# Section \"InputDevice\"\n"
|
|
|
|
|
"# Identifier \"spaceball\"\n"
|
|
|
|
|
"# Driver \"magellan\"\n"
|
|
|
|
|
"# Option \"Device\" \"/dev/cua0\"\n"
|
|
|
|
|
"# EndSection\n"
|
|
|
|
|
"#\n"
|
|
|
|
|
"# Section \"InputDevice\"\n"
|
|
|
|
|
"# Identifier \"spaceball2\"\n"
|
|
|
|
|
"# Driver \"spaceorb\"\n"
|
|
|
|
|
"# Option \"Device\" \"/dev/cua0\"\n"
|
|
|
|
|
"# EndSection\n"
|
|
|
|
|
"#\n"
|
|
|
|
|
"# Section \"InputDevice\"\n"
|
|
|
|
|
"# Identifier \"touchscreen0\"\n"
|
|
|
|
|
"# Driver \"microtouch\"\n"
|
|
|
|
|
"# Option \"Device\" \"/dev/ttyS0\"\n"
|
|
|
|
|
"# Option \"MinX\" \"1412\"\n"
|
|
|
|
|
"# Option \"MaxX\" \"15184\"\n"
|
|
|
|
|
"# Option \"MinY\" \"15372\"\n"
|
|
|
|
|
"# Option \"MaxY\" \"1230\"\n"
|
|
|
|
|
"# Option \"ScreenNumber\" \"0\"\n"
|
|
|
|
|
"# Option \"ReportingMode\" \"Scaled\"\n"
|
|
|
|
|
"# Option \"ButtonNumber\" \"1\"\n"
|
|
|
|
|
"# Option \"SendCoreEvents\"\n"
|
|
|
|
|
"# EndSection\n"
|
|
|
|
|
"#\n"
|
|
|
|
|
"# Section \"InputDevice\"\n"
|
|
|
|
|
"# Identifier \"touchscreen1\"\n"
|
|
|
|
|
"# Driver \"elo2300\"\n"
|
|
|
|
|
"# Option \"Device\" \"/dev/ttyS0\"\n"
|
|
|
|
|
"# Option \"MinX\" \"231\"\n"
|
|
|
|
|
"# Option \"MaxX\" \"3868\"\n"
|
|
|
|
|
"# Option \"MinY\" \"3858\"\n"
|
|
|
|
|
"# Option \"MaxY\" \"272\"\n"
|
|
|
|
|
"# Option \"ScreenNumber\" \"0\"\n"
|
|
|
|
|
"# Option \"ReportingMode\" \"Scaled\"\n"
|
|
|
|
|
"# Option \"ButtonThreshold\" \"17\"\n"
|
|
|
|
|
"# Option \"ButtonNumber\" \"1\"\n"
|
|
|
|
|
"# Option \"SendCoreEvents\"\n"
|
|
|
|
|
"# EndSection\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static char *monitorsection_text1 =
|
|
|
|
|
"# **********************************************************************\n"
|
|
|
|
|
"# Monitor section\n"
|
|
|
|
|
"# **********************************************************************\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Any number of monitor sections may be present\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"Section \"Monitor\"\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static char *monitorsection_text2 =
|
|
|
|
|
"# HorizSync is in kHz unless units are specified.\n"
|
|
|
|
|
"# HorizSync may be a comma separated list of discrete values, or a\n"
|
|
|
|
|
"# comma separated list of ranges of values.\n"
|
|
|
|
|
"# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR\'S\n"
|
|
|
|
|
"# USER MANUAL FOR THE CORRECT NUMBERS.\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static char *monitorsection_text3 =
|
|
|
|
|
"# HorizSync 30-64 # multisync\n"
|
|
|
|
|
"# HorizSync 31.5, 35.2 # multiple fixed sync frequencies\n"
|
|
|
|
|
"# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# VertRefresh is in Hz unless units are specified.\n"
|
|
|
|
|
"# VertRefresh may be a comma separated list of discrete values, or a\n"
|
|
|
|
|
"# comma separated list of ranges of values.\n"
|
|
|
|
|
"# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR\'S\n"
|
|
|
|
|
"# USER MANUAL FOR THE CORRECT NUMBERS.\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
#if 0
|
|
|
|
|
static char *monitorsection_text4 =
|
|
|
|
|
"# Modes can be specified in two formats. A compact one-line format, or\n"
|
|
|
|
|
"# a multi-line format.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# These two are equivalent\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# ModeLine \"1024x768i\" 45 1024 1048 1208 1264 768 776 784 817 Interlace\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Mode \"1024x768i\"\n"
|
|
|
|
|
"# DotClock 45\n"
|
|
|
|
|
"# HTimings 1024 1048 1208 1264\n"
|
|
|
|
|
"# VTimings 768 776 784 817\n"
|
|
|
|
|
"# Flags \"Interlace\"\n"
|
|
|
|
|
"# EndMode\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static char *modelines_text =
|
|
|
|
|
"# This is a set of standard mode timings. Modes that are out of monitor spec\n"
|
|
|
|
|
"# are automatically deleted by the server (provided the HorizSync and\n"
|
|
|
|
|
"# VertRefresh lines are correct), so there's no immediate need to\n"
|
|
|
|
|
"# delete mode timings (unless particular mode timings don't work on your\n"
|
|
|
|
|
"# monitor). With these modes, the best standard mode that your monitor\n"
|
|
|
|
|
"# and video card can support for a given resolution is automatically\n"
|
|
|
|
|
"# used.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# 640x400 @ 70 Hz, 31.5 kHz hsync\n"
|
|
|
|
|
"Modeline \"640x400\" 25.175 640 664 760 800 400 409 411 450\n"
|
|
|
|
|
"# 640x480 @ 60 Hz, 31.5 kHz hsync\n"
|
|
|
|
|
"Modeline \"640x480\" 25.175 640 664 760 800 480 491 493 525\n"
|
|
|
|
|
"# 800x600 @ 56 Hz, 35.15 kHz hsync\n"
|
|
|
|
|
"ModeLine \"800x600\" 36 800 824 896 1024 600 601 603 625\n"
|
|
|
|
|
"# 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync\n"
|
|
|
|
|
"Modeline \"1024x768\" 44.9 1024 1048 1208 1264 768 776 784 817 Interlace\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# 640x400 @ 85 Hz, 37.86 kHz hsync\n"
|
|
|
|
|
"Modeline \"640x400\" 31.5 640 672 736 832 400 401 404 445 -HSync +VSync\n"
|
|
|
|
|
"# 640x480 @ 72 Hz, 36.5 kHz hsync\n"
|
|
|
|
|
"Modeline \"640x480\" 31.5 640 680 720 864 480 488 491 521\n"
|
|
|
|
|
"# 640x480 @ 75 Hz, 37.50 kHz hsync\n"
|
|
|
|
|
"ModeLine \"640x480\" 31.5 640 656 720 840 480 481 484 500 -HSync -VSync\n"
|
|
|
|
|
"# 800x600 @ 60 Hz, 37.8 kHz hsync\n"
|
|
|
|
|
"Modeline \"800x600\" 40 800 840 968 1056 600 601 605 628 +hsync +vsync\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# 640x480 @ 85 Hz, 43.27 kHz hsync\n"
|
|
|
|
|
"Modeline \"640x480\" 36 640 696 752 832 480 481 484 509 -HSync -VSync\n"
|
|
|
|
|
"# 1152x864 @ 89 Hz interlaced, 44 kHz hsync\n"
|
|
|
|
|
"ModeLine \"1152x864\" 65 1152 1168 1384 1480 864 865 875 985 Interlace\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# 800x600 @ 72 Hz, 48.0 kHz hsync\n"
|
|
|
|
|
"Modeline \"800x600\" 50 800 856 976 1040 600 637 643 666 +hsync +vsync\n"
|
|
|
|
|
"# 1024x768 @ 60 Hz, 48.4 kHz hsync\n"
|
|
|
|
|
"Modeline \"1024x768\" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# 640x480 @ 100 Hz, 53.01 kHz hsync\n"
|
|
|
|
|
"Modeline \"640x480\" 45.8 640 672 768 864 480 488 494 530 -HSync -VSync\n"
|
|
|
|
|
"# 1152x864 @ 60 Hz, 53.5 kHz hsync\n"
|
|
|
|
|
"Modeline \"1152x864\" 89.9 1152 1216 1472 1680 864 868 876 892 -HSync -VSync\n"
|
|
|
|
|
"# 800x600 @ 85 Hz, 55.84 kHz hsync\n"
|
|
|
|
|
"Modeline \"800x600\" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# 1024x768 @ 70 Hz, 56.5 kHz hsync\n"
|
|
|
|
|
"Modeline \"1024x768\" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync\n"
|
|
|
|
|
"# 1280x1024 @ 87 Hz interlaced, 51 kHz hsync\n"
|
|
|
|
|
"Modeline \"1280x1024\" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# 800x600 @ 100 Hz, 64.02 kHz hsync\n"
|
|
|
|
|
"Modeline \"800x600\" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync\n"
|
|
|
|
|
"# 1024x768 @ 76 Hz, 62.5 kHz hsync\n"
|
|
|
|
|
"Modeline \"1024x768\" 85 1024 1032 1152 1360 768 784 787 823\n"
|
|
|
|
|
"# 1152x864 @ 70 Hz, 62.4 kHz hsync\n"
|
|
|
|
|
"Modeline \"1152x864\" 92 1152 1208 1368 1474 864 865 875 895\n"
|
|
|
|
|
"# 1280x1024 @ 61 Hz, 64.2 kHz hsync\n"
|
|
|
|
|
"Modeline \"1280x1024\" 110 1280 1328 1512 1712 1024 1025 1028 1054\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# 1024x768 @ 85 Hz, 70.24 kHz hsync\n"
|
|
|
|
|
"Modeline \"1024x768\" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync\n"
|
|
|
|
|
"# 1152x864 @ 78 Hz, 70.8 kHz hsync\n"
|
|
|
|
|
"Modeline \"1152x864\" 110 1152 1240 1324 1552 864 864 876 908\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# 1280x1024 @ 70 Hz, 74.59 kHz hsync\n"
|
|
|
|
|
"Modeline \"1280x1024\" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync\n"
|
|
|
|
|
"# 1600x1200 @ 60Hz, 75.00 kHz hsync\n"
|
|
|
|
|
"Modeline \"1600x1200\" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync\n"
|
|
|
|
|
"# 1152x864 @ 84 Hz, 76.0 kHz hsync\n"
|
|
|
|
|
"Modeline \"1152x864\" 135 1152 1464 1592 1776 864 864 876 908\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# 1280x1024 @ 74 Hz, 78.85 kHz hsync\n"
|
|
|
|
|
"Modeline \"1280x1024\" 135 1280 1312 1456 1712 1024 1027 1030 1064\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# 1024x768 @ 100Hz, 80.21 kHz hsync\n"
|
|
|
|
|
"Modeline \"1024x768\" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync\n"
|
|
|
|
|
"# 1280x1024 @ 76 Hz, 81.13 kHz hsync\n"
|
|
|
|
|
"Modeline \"1280x1024\" 135 1280 1312 1416 1664 1024 1027 1030 1064\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# 1600x1200 @ 70 Hz, 87.50 kHz hsync\n"
|
|
|
|
|
"Modeline \"1600x1200\" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync\n"
|
|
|
|
|
"# 1152x864 @ 100 Hz, 89.62 kHz hsync\n"
|
|
|
|
|
"Modeline \"1152x864\" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync\n"
|
|
|
|
|
"# 1280x1024 @ 85 Hz, 91.15 kHz hsync\n"
|
|
|
|
|
"Modeline \"1280x1024\" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync\n"
|
|
|
|
|
"# 1600x1200 @ 75 Hz, 93.75 kHz hsync\n"
|
|
|
|
|
"Modeline \"1600x1200\" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync\n"
|
|
|
|
|
"# 1600x1200 @ 85 Hz, 105.77 kHz hsync\n"
|
|
|
|
|
"Modeline \"1600x1200\" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync\n"
|
|
|
|
|
"# 1280x1024 @ 100 Hz, 107.16 kHz hsync\n"
|
|
|
|
|
"Modeline \"1280x1024\" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# 1800x1440 @ 64Hz, 96.15 kHz hsync \n"
|
|
|
|
|
"ModeLine \"1800X1440\" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync\n"
|
|
|
|
|
"# 1800x1440 @ 70Hz, 104.52 kHz hsync \n"
|
|
|
|
|
"ModeLine \"1800X1440\" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# 512x384 @ 78 Hz, 31.50 kHz hsync\n"
|
|
|
|
|
"Modeline \"512x384\" 20.160 512 528 592 640 384 385 388 404 -HSync -VSync\n"
|
|
|
|
|
"# 512x384 @ 85 Hz, 34.38 kHz hsync\n"
|
|
|
|
|
"Modeline \"512x384\" 22 512 528 592 640 384 385 388 404 -HSync -VSync\n"
|
|
|
|
|
"\n"
|
|
|
|
|
#if XFREE86_VERSION >= 311
|
|
|
|
|
"# Low-res Doublescan modes\n"
|
|
|
|
|
"# If your chipset does not support doublescan, you get a 'squashed'\n"
|
|
|
|
|
"# resolution like 320x400.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio\n"
|
|
|
|
|
"Modeline \"320x200\" 12.588 320 336 384 400 200 204 205 225 Doublescan\n"
|
|
|
|
|
"# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio\n"
|
|
|
|
|
"Modeline \"320x240\" 12.588 320 336 384 400 240 245 246 262 Doublescan\n"
|
|
|
|
|
"# 320x240 @ 72 Hz, 36.5 kHz hsync\n"
|
|
|
|
|
"Modeline \"320x240\" 15.750 320 336 384 400 240 244 246 262 Doublescan\n"
|
|
|
|
|
"# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio\n"
|
|
|
|
|
"ModeLine \"400x300\" 18 400 416 448 512 300 301 302 312 Doublescan\n"
|
|
|
|
|
"# 400x300 @ 60 Hz, 37.8 kHz hsync\n"
|
|
|
|
|
"Modeline \"400x300\" 20 400 416 480 528 300 301 303 314 Doublescan\n"
|
|
|
|
|
"# 400x300 @ 72 Hz, 48.0 kHz hsync\n"
|
|
|
|
|
"Modeline \"400x300\" 25 400 424 488 520 300 319 322 333 Doublescan\n"
|
|
|
|
|
"# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio\n"
|
|
|
|
|
"ModeLine \"480x300\" 21.656 480 496 536 616 300 301 302 312 Doublescan\n"
|
|
|
|
|
"# 480x300 @ 60 Hz, 37.8 kHz hsync\n"
|
|
|
|
|
"Modeline \"480x300\" 23.890 480 496 576 632 300 301 303 314 Doublescan\n"
|
|
|
|
|
"# 480x300 @ 63 Hz, 39.6 kHz hsync\n"
|
|
|
|
|
"Modeline \"480x300\" 25 480 496 576 632 300 301 303 314 Doublescan\n"
|
|
|
|
|
"# 480x300 @ 72 Hz, 48.0 kHz hsync\n"
|
|
|
|
|
"Modeline \"480x300\" 29.952 480 504 584 624 300 319 322 333 Doublescan\n"
|
|
|
|
|
"\n"
|
|
|
|
|
#endif
|
|
|
|
|
;
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
static char *devicesection_text =
|
|
|
|
|
"# **********************************************************************\n"
|
|
|
|
|
"# Graphics device section\n"
|
|
|
|
|
"# **********************************************************************\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Any number of graphics device sections may be present\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Standard VGA Device:\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"Section \"Device\"\n"
|
|
|
|
|
" Identifier \"Standard VGA\"\n"
|
|
|
|
|
" VendorName \"Unknown\"\n"
|
|
|
|
|
" BoardName \"Unknown\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# The chipset line is optional in most cases. It can be used to override\n"
|
|
|
|
|
"# the driver's chipset detection, and should not normally be specified.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Chipset \"generic\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# The Driver line must be present. When using run-time loadable driver\n"
|
|
|
|
|
"# modules, this line instructs the server to load the specified driver\n"
|
|
|
|
|
"# module. Even when not using loadable driver modules, this line\n"
|
|
|
|
|
"# indicates which driver should interpret the information in this section.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
" Driver \"vga\"\n"
|
|
|
|
|
"# The BusID line is used to specify which of possibly multiple devices\n"
|
|
|
|
|
"# this section is intended for. When this line isn't present, a device\n"
|
|
|
|
|
"# section can only match up with the primary video device. For PCI\n"
|
|
|
|
|
"# devices a line like the following could be used. This line should not\n"
|
|
|
|
|
"# normally be included unless there is more than one video device\n"
|
|
|
|
|
"# intalled.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# BusID \"PCI:0:10:0\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# VideoRam 256\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Clocks 25.2 28.3\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"EndSection\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Device configured by xorgconfig:\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static char *screensection_text1 =
|
|
|
|
|
"# **********************************************************************\n"
|
|
|
|
|
"# Screen sections\n"
|
|
|
|
|
"# **********************************************************************\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Any number of screen sections may be present. Each describes\n"
|
|
|
|
|
"# the configuration of a single screen. A single specific screen section\n"
|
|
|
|
|
"# may be specified from the X server command line with the \"-screen\"\n"
|
|
|
|
|
"# option.\n";
|
|
|
|
|
|
|
|
|
|
static char *serverlayout_section_text1 =
|
|
|
|
|
"# **********************************************************************\n"
|
|
|
|
|
"# ServerLayout sections.\n"
|
|
|
|
|
"# **********************************************************************\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Any number of ServerLayout sections may be present. Each describes\n"
|
|
|
|
|
"# the way multiple screens are organised. A specific ServerLayout\n"
|
|
|
|
|
"# section may be specified from the X server command line with the\n"
|
|
|
|
|
"# \"-layout\" option. In the absence of this, the first section is used.\n"
|
|
|
|
|
"# When now ServerLayout section is present, the first Screen section\n"
|
|
|
|
|
"# is used alone.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"Section \"ServerLayout\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# The Identifier line must be present\n"
|
|
|
|
|
" Identifier \"Simple Layout\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Each Screen line specifies a Screen section name, and optionally\n"
|
|
|
|
|
"# the relative position of other screens. The four names after\n"
|
|
|
|
|
"# primary screen name are the screens to the top, bottom, left and right\n"
|
|
|
|
|
"# of the primary screen. In this example, screen 2 is located to the\n"
|
|
|
|
|
"# right of screen 1.\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static char *serverlayout_section_text2 =
|
|
|
|
|
"\n"
|
|
|
|
|
"# Each InputDevice line specifies an InputDevice section name and\n"
|
|
|
|
|
"# optionally some options to specify the way the device is to be\n"
|
|
|
|
|
"# used. Those options include \"CorePointer\", \"CoreKeyboard\" and\n"
|
|
|
|
|
"# \"SendCoreEvents\".\n"
|
|
|
|
|
"\n"
|
|
|
|
|
" InputDevice \"Mouse1\" \"CorePointer\"\n"
|
|
|
|
|
" InputDevice \"Keyboard1\" \"CoreKeyboard\"\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"EndSection\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"# Section \"DRI\"\n"
|
|
|
|
|
"# Mode 0666\n"
|
|
|
|
|
"# EndSection\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
write_fontpath_section(FILE *f)
|
|
|
|
|
{
|
|
|
|
|
/* this will create the Fontpath lines, but only after checking,
|
|
|
|
|
* that the corresponding dir exists (was THE absolute problem
|
|
|
|
|
* users had with XFree86/OS2 3.1.2D !)
|
|
|
|
|
*/
|
|
|
|
|
int i;
|
|
|
|
|
char cur[256+20],*colon, *hash;
|
|
|
|
|
|
|
|
|
|
#ifdef COMPILEDDEFAULTFONTPATH
|
|
|
|
|
static const char dfp[] = COMPILEDDEFAULTFONTPATH;
|
|
|
|
|
const char *thisdir;
|
|
|
|
|
const char *nextdir;
|
|
|
|
|
int len;
|
|
|
|
|
|
|
|
|
|
for (thisdir = dfp; thisdir != NULL; thisdir = nextdir) {
|
|
|
|
|
nextdir = strchr(thisdir, ',');
|
|
|
|
|
if (nextdir == NULL) {
|
|
|
|
|
len = strlen(thisdir);
|
|
|
|
|
} else {
|
|
|
|
|
len = nextdir - thisdir;
|
|
|
|
|
nextdir++;
|
|
|
|
|
}
|
|
|
|
|
if (len > sizeof(cur))
|
|
|
|
|
continue;
|
|
|
|
|
strncpy(cur, thisdir, len);
|
|
|
|
|
cur[len] = '\0';
|
|
|
|
|
colon = strchr(cur+2,':'); /* OS/2: C:/...:scaled */
|
|
|
|
|
if (colon) *colon = 0;
|
|
|
|
|
hash = exists_dir(cur) ? "" : "#";
|
|
|
|
|
if (colon) *colon = ':';
|
|
|
|
|
fprintf(f,"%s FontPath \"%s\"\n", hash, cur);
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
for (i=0; XF86Config_fontpaths[i]; i++) {
|
|
|
|
|
strcpy(cur,TREEROOTFONT);
|
|
|
|
|
strcat(cur,XF86Config_fontpaths[i]);
|
|
|
|
|
/* remove a ':' */
|
|
|
|
|
colon = strchr(cur+2,':'); /* OS/2: C:/...:scaled */
|
|
|
|
|
if (colon) *colon = 0;
|
|
|
|
|
#ifdef COMPILEDDEFAULTFONTPATH
|
|
|
|
|
/* skip if we already added it as part of the default font path */
|
|
|
|
|
if (strstr(dfp, cur) != NULL)
|
|
|
|
|
continue;
|
|
|
|
|
#endif
|
|
|
|
|
hash = exists_dir(cur) ? "" : "#";
|
|
|
|
|
fprintf(f,"%s FontPath \"%s%s\"\n",
|
|
|
|
|
hash,
|
|
|
|
|
TREEROOTFONT,
|
|
|
|
|
XF86Config_fontpaths[i]);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
write_XF86Config(char *filename)
|
|
|
|
|
{
|
|
|
|
|
FILE *f;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Write the file.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
f = fopen(filename, "w");
|
|
|
|
|
if (f == NULL) {
|
|
|
|
|
printf("Failed to open filename for writing.\n");
|
|
|
|
|
#ifndef __EMX__
|
|
|
|
|
if (getuid() != 0)
|
|
|
|
|
printf("Maybe you need to be root to write to the specified directory?\n");
|
|
|
|
|
#endif
|
|
|
|
|
return(1);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
fprintf(f, "%s", XF86Config_firstchunk_text);
|
|
|
|
|
write_fontpath_section(f);
|
|
|
|
|
fprintf(f, "%s", XF86Config_fontpathchunk_text);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Write keyboard section.
|
|
|
|
|
*/
|
|
|
|
|
if (config_altmeta) {
|
|
|
|
|
fprintf(f, " Option \"LeftAlt\" \"Meta\"\n");
|
|
|
|
|
fprintf(f, " Option \"RightAlt\" \"ModeShift\"\n");
|
|
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
fprintf(f, "# Option \"LeftAlt\" \"Meta\"\n");
|
|
|
|
|
fprintf(f, "# Option \"RightAlt\" \"ModeShift\"\n");
|
|
|
|
|
}
|
2006-11-28 13:29:31 -07:00
|
|
|
#ifdef NEED_WSKBD
|
2006-11-26 11:13:41 -07:00
|
|
|
/* wscons keyoards need a protocol line */
|
|
|
|
|
fprintf(f, " Option \"Protocol\" \"wskbd\"\n");
|
|
|
|
|
fprintf(f, " Option \"Device\" \"%s\"\n", config_keyboard_dev);
|
|
|
|
|
fprintf(f, " Option \"XkbKeycodes\" \"wscons(ppc)\"\n");
|
|
|
|
|
#endif
|
|
|
|
|
fprintf(f, "%s", keyboardchunk2_text);
|
|
|
|
|
|
|
|
|
|
fprintf(f, "%s", keyboardchunk3_text);
|
|
|
|
|
if (config_xkbdisable) {
|
|
|
|
|
fprintf(f, " Option \"XkbDisable\"\n\n");
|
|
|
|
|
} else {
|
|
|
|
|
fprintf(f, "# Option \"XkbDisable\"\n\n");
|
|
|
|
|
}
|
|
|
|
|
fprintf(f, " Option \"XkbRules\" \"%s\"\n",
|
|
|
|
|
config_xkbrules);
|
|
|
|
|
fprintf(f, " Option \"XkbModel\" \"%s\"\n",
|
|
|
|
|
config_xkbmodel);
|
|
|
|
|
fprintf(f, " Option \"XkbLayout\" \"%s\"\n",
|
|
|
|
|
config_xkblayout);
|
|
|
|
|
if (config_xkbvariant)
|
|
|
|
|
fprintf(f, " Option \"XkbVariant\" \"%s\"\n",
|
|
|
|
|
config_xkbvariant);
|
|
|
|
|
if (config_xkboptions)
|
|
|
|
|
fprintf(f, " Option \"XkbOptions\" \"%s\"\n",
|
|
|
|
|
config_xkboptions);
|
|
|
|
|
|
|
|
|
|
fprintf(f, "%s",keyboardlastchunk_text);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Write pointer section.
|
|
|
|
|
*/
|
|
|
|
|
fprintf(f, "%s", pointersection_text1);
|
|
|
|
|
fprintf(f, " Option \"Protocol\" \"%s\"\t# %s\n",
|
|
|
|
|
mouse_info[config_mousetype].name,
|
|
|
|
|
mouse_info[config_mousetype].desc);
|
|
|
|
|
#if !defined(__UNIXOS2__) && !defined(QNX4)
|
|
|
|
|
fprintf(f, " Option \"Device\" \"%s\"\n", config_pointerdevice);
|
|
|
|
|
#endif
|
|
|
|
|
fprintf(f, "%s", pointersection_text2);
|
|
|
|
|
if (!config_emulate3buttons)
|
|
|
|
|
fprintf(f, "#");
|
|
|
|
|
fprintf(f, " Option \"Emulate3Buttons\"\n");
|
|
|
|
|
fprintf(f, "# Option \"Emulate3Timeout\" \"50\"\n\n");
|
|
|
|
|
fprintf(f, "# ChordMiddle is an option for some 3-button Logitech mice\n\n");
|
|
|
|
|
if (!config_chordmiddle)
|
|
|
|
|
fprintf(f, "#");
|
|
|
|
|
fprintf(f, " Option \"ChordMiddle\"\n\n");
|
|
|
|
|
if (config_cleardtrrts) {
|
|
|
|
|
fprintf(f, " Option \"ClearDTR\"\n");
|
|
|
|
|
fprintf(f, " Option \"ClearRTS\"\n\n");
|
|
|
|
|
}
|
2006-11-28 13:29:31 -07:00
|
|
|
fprintf(f, "# ZaxisMapping is an option for handling the wheel\n");
|
|
|
|
|
if (!config_wheel)
|
|
|
|
|
fprintf(f, "#");
|
|
|
|
|
fprintf(f, " Option \"ZAxisMapping\" \"4 5\"\n\n");
|
|
|
|
|
|
2006-11-26 11:13:41 -07:00
|
|
|
fprintf(f, "EndSection\n\n\n");
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Write XInput sample section
|
|
|
|
|
*/
|
|
|
|
|
fprintf(f, "%s", xinputsection_text);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Write monitor section.
|
|
|
|
|
*/
|
|
|
|
|
fprintf(f, "%s", monitorsection_text1);
|
|
|
|
|
fprintf(f, " Identifier \"%s\"\n", config_monitoridentifier);
|
|
|
|
|
fprintf(f, "\n");
|
|
|
|
|
fprintf(f, "%s", monitorsection_text2);
|
|
|
|
|
fprintf(f, " HorizSync %s\n", config_hsyncrange);
|
|
|
|
|
fprintf(f, "\n");
|
|
|
|
|
fprintf(f, "%s", monitorsection_text3);
|
|
|
|
|
fprintf(f, " VertRefresh %s\n", config_vsyncrange);
|
|
|
|
|
fprintf(f, "\n");
|
|
|
|
|
#if 0
|
|
|
|
|
fprintf(f, "%s", monitorsection_text4);
|
|
|
|
|
fprintf(f, "%s", modelines_text);
|
|
|
|
|
#endif
|
|
|
|
|
fprintf(f, "EndSection\n\n\n");
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Write Device section.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
fprintf(f, "%s", devicesection_text);
|
|
|
|
|
fprintf(f, "Section \"Device\"\n");
|
|
|
|
|
fprintf(f, " Identifier \"%s\"\n", config_deviceidentifier);
|
|
|
|
|
if (card_selected != -1) {
|
|
|
|
|
fprintf(f, " Driver \"%s\"\n", card[card_selected].driver);
|
|
|
|
|
if (card[card_selected].flags & UNSUPPORTED) {
|
|
|
|
|
fprintf(f, " # unsupported card\n");
|
|
|
|
|
}
|
|
|
|
|
} else {
|
|
|
|
|
fprintf(f, " Driver \"vga\"\n"
|
|
|
|
|
" # unsupported card\n");
|
|
|
|
|
}
|
|
|
|
|
/* Rely on server to detect video memory. */
|
|
|
|
|
fprintf(f, " #VideoRam %d\n", config_videomemory);
|
|
|
|
|
if (card_selected != -1)
|
|
|
|
|
/* Add comment lines from card definition. */
|
|
|
|
|
fprintf(f, card[card_selected].lines);
|
|
|
|
|
if (config_ramdac != NULL)
|
|
|
|
|
fprintf(f, " Ramdac \"%s\"\n", config_ramdac);
|
|
|
|
|
if (card_selected != -1)
|
|
|
|
|
if (card[card_selected].dacspeed != NULL)
|
|
|
|
|
fprintf(f, " Dacspeed %s\n",
|
|
|
|
|
card[card_selected].dacspeed);
|
|
|
|
|
if (config_clockchip != NULL)
|
|
|
|
|
fprintf(f, " Clockchip \"%s\"\n", config_clockchip);
|
|
|
|
|
else
|
|
|
|
|
if (config_numberofclockslines == 0)
|
|
|
|
|
fprintf(f, " # Insert Clocks lines here if appropriate\n");
|
|
|
|
|
else {
|
|
|
|
|
int i;
|
|
|
|
|
for (i = 0; i < config_numberofclockslines; i++)
|
|
|
|
|
fprintf(f, " Clocks %s\n", config_clocksline[i]);
|
|
|
|
|
}
|
|
|
|
|
fprintf(f, "EndSection\n\n\n");
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Write Screen sections.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
fprintf(f, "%s", screensection_text1);
|
|
|
|
|
|
|
|
|
|
fprintf(f,
|
|
|
|
|
"Section \"Screen\"\n"
|
|
|
|
|
" Identifier \"Screen 1\"\n"
|
|
|
|
|
" Device \"%s\"\n"
|
|
|
|
|
" Monitor \"%s\"\n"
|
|
|
|
|
" DefaultDepth %s\n"
|
|
|
|
|
"\n"
|
|
|
|
|
" Subsection \"Display\"\n"
|
|
|
|
|
" Depth 8\n"
|
|
|
|
|
" Modes %s\n"
|
|
|
|
|
" ViewPort 0 0\n",
|
|
|
|
|
config_deviceidentifier,
|
|
|
|
|
config_monitoridentifier,
|
|
|
|
|
config_depth,
|
|
|
|
|
config_modesline8bpp);
|
|
|
|
|
if (config_virtual)
|
|
|
|
|
fprintf(f, " Virtual %d %d\n",
|
|
|
|
|
config_virtualx8bpp, config_virtualy8bpp);
|
|
|
|
|
fprintf(f,
|
|
|
|
|
" EndSubsection\n"
|
|
|
|
|
" Subsection \"Display\"\n"
|
|
|
|
|
" Depth 16\n"
|
|
|
|
|
" Modes %s\n"
|
|
|
|
|
" ViewPort 0 0\n",
|
|
|
|
|
config_modesline16bpp);
|
|
|
|
|
if (config_virtual)
|
|
|
|
|
fprintf(f, " Virtual %d %d\n",
|
|
|
|
|
config_virtualx16bpp, config_virtualy16bpp);
|
|
|
|
|
fprintf(f,
|
|
|
|
|
" EndSubsection\n"
|
|
|
|
|
" Subsection \"Display\"\n"
|
|
|
|
|
" Depth 24\n"
|
|
|
|
|
" Modes %s\n"
|
|
|
|
|
" ViewPort 0 0\n",
|
|
|
|
|
config_modesline24bpp);
|
|
|
|
|
if (config_virtual)
|
|
|
|
|
fprintf(f, " Virtual %d %d\n",
|
|
|
|
|
config_virtualx24bpp, config_virtualy24bpp);
|
|
|
|
|
fprintf(f,
|
|
|
|
|
" EndSubsection\n"
|
|
|
|
|
"EndSection\n"
|
|
|
|
|
"\n");
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* ServerLayout section
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
fprintf(f, serverlayout_section_text1);
|
|
|
|
|
/* replace with screen config */
|
|
|
|
|
fprintf(f, " Screen \"Screen 1\"\n");
|
|
|
|
|
|
|
|
|
|
fprintf(f, serverlayout_section_text2);
|
|
|
|
|
|
|
|
|
|
fclose(f);
|
|
|
|
|
return(0);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static char *
|
|
|
|
|
append_version(char *name)
|
|
|
|
|
{
|
|
|
|
|
#ifdef APPEND_VERSION_TO_CONFIG_NAME
|
|
|
|
|
char *ret = NULL;
|
|
|
|
|
|
|
|
|
|
if (XF86_VERSION_MAJOR > 9 || XF86_VERSION_MAJOR < 0)
|
|
|
|
|
return name;
|
|
|
|
|
|
|
|
|
|
ret = Malloc(strlen(name) + 2 + 1);
|
|
|
|
|
sprintf(ret, "%s-%d", name, XF86_VERSION_MAJOR);
|
|
|
|
|
free(name);
|
|
|
|
|
return ret;
|
|
|
|
|
#else
|
|
|
|
|
return name;
|
|
|
|
|
#endif
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Ask where to write XF86Config to. Returns filename.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
static char *
|
|
|
|
|
ask_XF86Config_location(void) {
|
|
|
|
|
char s[80];
|
|
|
|
|
char *filename = NULL;
|
|
|
|
|
|
|
|
|
|
printf(
|
|
|
|
|
"I am going to write the " CONFIGNAME " file now. Make sure you don't accidently\n"
|
|
|
|
|
"overwrite a previously configured one.\n\n");
|
|
|
|
|
|
|
|
|
|
#ifndef __EMX__
|
|
|
|
|
if (getuid() == 0) {
|
|
|
|
|
#ifdef PREFER_XF86CONFIG_IN_ETC
|
|
|
|
|
filename = Strdup("/etc/X11/" XCONFIGFILE);
|
|
|
|
|
filename = append_version(filename);
|
|
|
|
|
printf("Shall I write it to %s? ", filename);
|
|
|
|
|
getstring(s);
|
|
|
|
|
printf("\n");
|
|
|
|
|
if (answerisyes(s))
|
|
|
|
|
return filename;
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
if (filename)
|
|
|
|
|
free(filename);
|
|
|
|
|
filename = Strdup(TREEROOTCFG "/" XCONFIGFILE);
|
|
|
|
|
filename = append_version(filename);
|
|
|
|
|
printf("Please answer the following question with either 'y' or 'n'.\n");
|
|
|
|
|
printf("Shall I write it to the default location, %s? ", filename);
|
|
|
|
|
getstring(s);
|
|
|
|
|
printf("\n");
|
|
|
|
|
if (answerisyes(s))
|
|
|
|
|
return filename;
|
|
|
|
|
|
|
|
|
|
#ifndef PREFER_XF86CONFIG_IN_ETC
|
|
|
|
|
if (filename)
|
|
|
|
|
free(filename);
|
|
|
|
|
filename = Strdup("/etc/X11/" XCONFIGFILE);
|
|
|
|
|
filename = append_version(filename);
|
|
|
|
|
printf("Shall I write it to %s? ", filename);
|
|
|
|
|
getstring(s);
|
|
|
|
|
printf("\n");
|
|
|
|
|
if (answerisyes(s))
|
|
|
|
|
return filename;
|
|
|
|
|
#endif
|
|
|
|
|
#else /* __EMX__ */
|
|
|
|
|
{
|
|
|
|
|
printf("Please answer the following question with either 'y' or 'n'.\n");
|
|
|
|
|
printf("Shall I write it to the default location, drive:/"__XSERVERNAME__"/lib/X11/XConfig? ");
|
|
|
|
|
getstring(s);
|
|
|
|
|
printf("\n");
|
|
|
|
|
if (answerisyes(s)) {
|
|
|
|
|
return __XOS2RedirRoot("/"__XSERVERNAME__"/lib/X11/XConfig",'/');
|
|
|
|
|
}
|
|
|
|
|
#endif /* __EMX__ */
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (filename)
|
|
|
|
|
free(filename);
|
|
|
|
|
filename = Strdup(XCONFIGFILE);
|
|
|
|
|
filename = append_version(filename);
|
|
|
|
|
printf("Do you want it written to the current directory as '%s'? ", filename);
|
|
|
|
|
getstring(s);
|
|
|
|
|
printf("\n");
|
|
|
|
|
if (answerisyes(s)) {
|
|
|
|
|
return filename;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
printf("Please give a filename to write to: ");
|
|
|
|
|
getstring(s);
|
|
|
|
|
printf("\n");
|
|
|
|
|
if (filename)
|
|
|
|
|
free(filename);
|
|
|
|
|
filename = Strdup(s);
|
|
|
|
|
return filename;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Check if an earlier version of XFree86 is installed; warn about proper
|
|
|
|
|
* search path order in that case.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
static char *notinstalled_text =
|
|
|
|
|
"The directory " TREEROOT " does not exist. This probably means that you have\n"
|
|
|
|
|
"not yet installed the version of "__XSERVERNAME__" that this program was built\n"
|
|
|
|
|
"to configure. Please install "__XSERVERNAME__" "XVERSIONSTRING" before running this program,\n"
|
|
|
|
|
"following the instructions in the INSTALL or README that comes with the\n"
|
|
|
|
|
__XSERVERNAME__" distribution for your OS.\n"
|
|
|
|
|
"For a minimal installation it is sufficient to only install base binaries,\n"
|
|
|
|
|
"libraries, configuration files and a server that you want to use.\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
#ifndef __UNIXOS2__
|
|
|
|
|
static char *oldxfree86_text =
|
|
|
|
|
"The directory '/usr/X386/bin' exists. You probably have a very old version of\n"
|
|
|
|
|
"XFree86 installed, but this program was built to configure "__XSERVERNAME__" "XVERSIONSTRING"\n"
|
|
|
|
|
"installed in '" TREEROOT "' instead of '/usr/X386'.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"It is important that the directory '" TREEROOT "' is present in your\n"
|
|
|
|
|
"search path, *before* any occurrence of '/usr/X386/bin'. If you have installed\n"
|
|
|
|
|
"X program binaries that are not in the base "__XSERVERNAME__" distribution in\n"
|
|
|
|
|
"'/usr/X386/bin', you can keep the directory in your path as long as it is\n"
|
|
|
|
|
"after '" TREEROOT "'.\n"
|
|
|
|
|
"\n";
|
|
|
|
|
|
|
|
|
|
static char *pathnote_text =
|
|
|
|
|
"Note that the X binary directory in your path may be a symbolic link.\n"
|
|
|
|
|
"In that case you could modify the symbolic link to point to the new binaries.\n"
|
|
|
|
|
"Example: 'rm -f /usr/bin/X11; ln -s /usr/X11R6/bin /usr/bin/X11', if the\n"
|
|
|
|
|
"link is '/usr/bin/X11'.\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"Make sure the path is OK before continuing.\n";
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
path_check(void) {
|
|
|
|
|
char s[80];
|
|
|
|
|
int ok;
|
|
|
|
|
|
|
|
|
|
ok = exists_dir(TREEROOT);
|
|
|
|
|
if (!ok) {
|
|
|
|
|
printf("%s", notinstalled_text);
|
|
|
|
|
printf("Do you want to continue? ");
|
|
|
|
|
getstring(s);
|
|
|
|
|
if (!answerisyes(s))
|
|
|
|
|
exit(-1);
|
|
|
|
|
printf("\n");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#ifndef __UNIXOS2__
|
|
|
|
|
ok = exists_dir("/usr/X386/bin");
|
|
|
|
|
if (!ok)
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
printf("%s", oldxfree86_text);
|
|
|
|
|
printf("Your PATH is currently set as follows:\n%s\n\n",
|
|
|
|
|
getenv("PATH"));
|
|
|
|
|
printf("%s", pathnote_text);
|
|
|
|
|
keypress();
|
|
|
|
|
#endif
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
configdir_check(void)
|
|
|
|
|
{
|
|
|
|
|
/* /etc/X11 may not exist on some systems */
|
|
|
|
|
if (getuid() == 0) {
|
|
|
|
|
struct stat buf;
|
|
|
|
|
if (stat("/etc/X11", &buf) == -1 && errno == ENOENT)
|
|
|
|
|
mkdir("/etc/X11", 0777);
|
|
|
|
|
if (stat(TREEROOTCFG, &buf) == -1 && errno == ENOENT)
|
|
|
|
|
mkdir(TREEROOTCFG, 0777);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Program entry point.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
int
|
|
|
|
|
main(int argc, char *argv[]) {
|
|
|
|
|
|
|
|
|
|
createtmpdir();
|
|
|
|
|
|
|
|
|
|
emptylines();
|
|
|
|
|
|
|
|
|
|
printf("%s", intro_text);
|
|
|
|
|
|
|
|
|
|
keypress();
|
|
|
|
|
emptylines();
|
|
|
|
|
|
|
|
|
|
path_check();
|
|
|
|
|
|
|
|
|
|
emptylines();
|
|
|
|
|
|
|
|
|
|
configdir_check();
|
|
|
|
|
|
|
|
|
|
emptylines();
|
|
|
|
|
|
|
|
|
|
mouse_configuration();
|
|
|
|
|
|
|
|
|
|
emptylines();
|
|
|
|
|
|
|
|
|
|
keyboard_configuration();
|
|
|
|
|
|
|
|
|
|
emptylines();
|
|
|
|
|
|
|
|
|
|
monitor_configuration();
|
|
|
|
|
|
|
|
|
|
emptylines();
|
|
|
|
|
|
|
|
|
|
carddb_configuration();
|
|
|
|
|
|
|
|
|
|
emptylines();
|
|
|
|
|
|
|
|
|
|
while(screen_configuration()){};
|
|
|
|
|
|
|
|
|
|
emptylines();
|
|
|
|
|
|
|
|
|
|
depth_configuration();
|
|
|
|
|
|
|
|
|
|
emptylines();
|
|
|
|
|
|
|
|
|
|
while(write_XF86Config(ask_XF86Config_location())){};
|
|
|
|
|
|
|
|
|
|
printf("%s", finalcomment_text);
|
|
|
|
|
|
|
|
|
|
exit(0);
|
|
|
|
|
}
|
