111 lines
4.5 KiB
Plaintext
111 lines
4.5 KiB
Plaintext
|
Post-installation instructions for X.Org on OpenBSD/i386
|
||
|
|
--------------------------------------------------------
|
||
|
|
|
||
|
|
Conventions used in this document:
|
||
|
|
- somename(1) implies that "somename" is a program, and there is a
|
||
|
|
manual page available in section 1 of the manual pages for further
|
||
|
|
reading, viewed by typing "man 1 somename".
|
||
|
|
|
||
|
|
1. Make sure your system has support for X enabled:
|
||
|
|
|
||
|
|
You must have "option APERTURE" in your kernel configuration and
|
||
|
|
uncomment the line that says:
|
||
|
|
|
||
|
|
machdep.allowaperture=1
|
||
|
|
|
||
|
|
or
|
||
|
|
|
||
|
|
machdep.allowaperture=2
|
||
|
|
|
||
|
|
in /etc/sysctl.conf. See xf86(4) for more details about security
|
||
|
|
issues related to this. After changing this variable in sysctl.conf,
|
||
|
|
you will need to reboot for the change to take effect. Most drivers for
|
||
|
|
X.Org XOrgVersion servers require this value to be set to 2, while
|
||
|
|
drivers for XFree86 3.3.6 require it only to be set to 1.
|
||
|
|
|
||
|
|
2. Find out about your hardware:
|
||
|
|
|
||
|
|
Find out what chipset is used by your video board. Write this
|
||
|
|
information down. The dmesg(8) command output is useful.
|
||
|
|
|
||
|
|
You need to decide if you can use the X.Org XOrgVersion server,
|
||
|
|
Xorg(1), or if you have some legacy VGA card supported only by
|
||
|
|
one of the old XFree86 3.3.6 servers:
|
||
|
|
|
||
|
|
XF86_3DLabs(1) XF86_Mach8(1) XF86_S3(1) XF86_VGA16(1)
|
||
|
|
XF86_I128(1) XF86_Mach32(1) XF86_S3V(1) XF86_SVGA(1)
|
||
|
|
XF86_8514(1) XF86_Mach64(1) XF86_W32(1) XF86_Mono(1)
|
||
|
|
XF86_P9000(1) XF86_AGX(1)
|
||
|
|
|
||
|
|
If in doubt, try X.Org XOrgVersion first.
|
||
|
|
|
||
|
|
What kind of mouse do you have and which port is it connected to?
|
||
|
|
The two most common cases are a PS/2 style or USB mouse, for which
|
||
|
|
OpenBSD uses the wsmouse(4) protocol with the /dev/wsmouse device.
|
||
|
|
If you have a serial mouse, connected to /dev/tty00 (MS Windows
|
||
|
|
COM1: port) or /dev/tty01 (COM2: port) you probably want to try the
|
||
|
|
"auto" protocol first.
|
||
|
|
|
||
|
|
3. Create the configuration file for your server.
|
||
|
|
|
||
|
|
For many users of X.Org's servers, an xorg.conf file is not needed,
|
||
|
|
simply start X, and it will automatically detect and use your
|
||
|
|
hardware. If your hardware is not properly autodetected or supported
|
||
|
|
or not supported as you wish, you will have to create a configuration
|
||
|
|
file.
|
||
|
|
|
||
|
|
XFree86 3.3.6 will require an /etc/XF86Config file to be generated.
|
||
|
|
|
||
|
|
Please note the location of the configuration file listed below.
|
||
|
|
Both the location and the utilities that generate them are different.
|
||
|
|
You will not have great success mixing X.Org XOrgVersion xorg.conf(5)
|
||
|
|
files with XFree86 3.3.6 XF86Config files.
|
||
|
|
|
||
|
|
a. For the X.Org XOrgVersion server, run xorgcfg(1) or xorgconfig(1).
|
||
|
|
- The text mode of xorgcfg(1) is recommended, by typing
|
||
|
|
"xorgcfg -textmode".
|
||
|
|
- This will produce the /etc/X11/xorg.conf file.
|
||
|
|
- This will create /usr/X11R6/bin/X as a link to Xorg.
|
||
|
|
- If "xorgcfg -textmode" doesn't work on your hardware, try
|
||
|
|
the alternate program, xorgconfig(1).
|
||
|
|
- if neither of these alternatives produce a good file, try
|
||
|
|
"X -configure" as root. This will produce a "best guess"
|
||
|
|
xorg.conf.new file, which can be used as a starting point
|
||
|
|
for your modifications.
|
||
|
|
|
||
|
|
See the X.Org XOrgVersion documentation available at:
|
||
|
|
|
||
|
|
/usr/X11R6/lib/X11/doc/
|
||
|
|
|
||
|
|
See also Xorg(1), xorg.conf(5).
|
||
|
|
|
||
|
|
b. For the XFree86 3.3.6 server, run XF86Setup(1) or xf86config3(1).
|
||
|
|
|
||
|
|
- This will make the /etc/XF86Config file.
|
||
|
|
- This will create /usr/X11R6/bin/X as a link to your XF86_* server,
|
||
|
|
one of the XFree86 3.3.6 servers listed in item 2 above.
|
||
|
|
- If for some reason XF86Setup(1) doesn't work on your hardware, try
|
||
|
|
the alternate program xf86config3(1).
|
||
|
|
|
||
|
|
See the XF86Config user's guide for XFree86 3.3.6 servers at:
|
||
|
|
|
||
|
|
/usr/X11R6/lib/X11/doc/XFree86-3.3.6/QuickStart.doc
|
||
|
|
|
||
|
|
For manual configuration information, see xf86config-3(5).
|
||
|
|
|
||
|
|
4. Start either xdm(1) or startx(1).
|
||
|
|
|
||
|
|
a. Start xdm(1), the X display manager by activating the xdm_flags option
|
||
|
|
in /etc/rc.conf(8) or /etc/rc.conf.local(8).
|
||
|
|
|
||
|
|
b. Start startx(1) from a console shell. It is the X script that starts
|
||
|
|
the X server and a few X applications, including a window manager.
|
||
|
|
|
||
|
|
5. With X.Org XOrgVersion, you can use antialiased fonts in some applications.
|
||
|
|
visit http://www.openbsd.org/faq/truetype.html for more information.
|
||
|
|
|
||
|
|
problem_blurb For XFree86 3 documentation,
|
||
|
|
visit http://www.xfree86.org/3.3.6/.
|
||
|
|
|
||
|
|
$OpenBSD: README.i386,v 1.1.1.1 2006/11/27 11:25:45 matthieu Exp $
|