215 lines
9.1 KiB
Groff
215 lines
9.1 KiB
Groff
|
.\" $XFree86: xc/programs/Xserver/hw/xfree86/drivers/i810/i810.man,v 1.5 2003/10/18 02:27:07 dawes Exp $
|
||
|
|
.\" shorthand for double quote that works everywhere.
|
||
|
|
.ds q \N'34'
|
||
|
|
.TH I810 __drivermansuffix__ __vendorversion__
|
||
|
|
.SH NAME
|
||
|
|
i810 \- Intel 8xx integrated graphics chipsets
|
||
|
|
.SH SYNOPSIS
|
||
|
|
.nf
|
||
|
|
.B "Section \*qDevice\*q"
|
||
|
|
.BI " Identifier \*q" devname \*q
|
||
|
|
.B " Driver \*qi810\*q"
|
||
|
|
\ \ ...
|
||
|
|
.B EndSection
|
||
|
|
.fi
|
||
|
|
.SH DESCRIPTION
|
||
|
|
.B i810
|
||
|
|
is an __xservername__ driver for Intel integrated graphics chipsets.
|
||
|
|
The driver supports depths 8, 15, 16 and 24. All visual types are
|
||
|
|
supported in depth 8. For the i810/i815 other depths support the
|
||
|
|
TrueColor and DirectColor visuals. For the 830M and later, only the
|
||
|
|
TrueColor visual is supported for depths greater than 8. The driver
|
||
|
|
supports hardware accelerated 3D via the Direct Rendering Infrastructure
|
||
|
|
(DRI), but only in depth 16 for the i810/i815 and depths 16 and 24 for
|
||
|
|
the 830M and later.
|
||
|
|
.SH SUPPORTED HARDWARE
|
||
|
|
.B i810
|
||
|
|
supports the i810, i810-DC100, i810e, i815, 830M, 845G, 852GM, 855GM,
|
||
|
|
865G, 915G and 915GM chipsets.
|
||
|
|
|
||
|
|
.SH CONFIGURATION DETAILS
|
||
|
|
Please refer to __xconfigfile__(__filemansuffix__) for general configuration
|
||
|
|
details. This section only covers configuration details specific to this
|
||
|
|
driver.
|
||
|
|
.PP
|
||
|
|
The Intel 8xx family of integrated graphics chipsets has a unified memory
|
||
|
|
architecture and uses system memory for video ram. For the i810 and
|
||
|
|
i815 family of chipset, operating system support for allocating system
|
||
|
|
memory for video use is required in order to use this driver. For the
|
||
|
|
830M and later, this is required in order for the driver to use more
|
||
|
|
video ram than has been pre-allocated at boot time by the BIOS. This
|
||
|
|
is usually achieved with an "agpgart" or "agp" kernel driver. Linux,
|
||
|
|
and recent versions of FreeBSD, OpenBSD and NetBSD have such kernel
|
||
|
|
drivers available.
|
||
|
|
.PP
|
||
|
|
By default 8 Megabytes
|
||
|
|
of system memory are used for graphics. For the 830M and later, the
|
||
|
|
default is 8 Megabytes when DRI is not enabled and 32 Megabytes with
|
||
|
|
DRI is enabled. This amount may be changed with the
|
||
|
|
.B VideoRam
|
||
|
|
entry in the config file
|
||
|
|
.B "Device"
|
||
|
|
section. It may be set to any reasonable value up to 64MB for older
|
||
|
|
chipsets or 128MB for newer chipets. It is advisable to check the
|
||
|
|
__xservername__
|
||
|
|
log file to check if any features have been disabled because of insufficient
|
||
|
|
video memory. In particular, DRI support or tiling mode may be disabled
|
||
|
|
with insufficient video memory. Either of these being disabled will
|
||
|
|
reduce performance for 3D applications. Note however, that increasing
|
||
|
|
this value too much will reduce the amount of system memory available
|
||
|
|
for other applications.
|
||
|
|
.PP
|
||
|
|
The driver makes use of the video BIOS to program video modes for the 830M
|
||
|
|
and later. This limits the video modes that can be used to those provided
|
||
|
|
by the video BIOS, and to those that will fit into the amount of video memory
|
||
|
|
that the video BIOS is aware of.
|
||
|
|
.PP
|
||
|
|
The following driver
|
||
|
|
.B Options
|
||
|
|
are supported
|
||
|
|
.TP
|
||
|
|
.BI "Option \*qNoAccel\*q \*q" boolean \*q
|
||
|
|
Disable or enable acceleration. Default: acceleration is enabled.
|
||
|
|
.TP
|
||
|
|
.BI "Option \*qSWCursor\*q \*q" boolean \*q
|
||
|
|
Disable or enable software cursor. Default: software cursor is disable
|
||
|
|
and a hardware cursor is used for configurations where the hardware cursor
|
||
|
|
is available.
|
||
|
|
.TP
|
||
|
|
.BI "Option \*qColorKey\*q \*q" integer \*q
|
||
|
|
This sets the default pixel value for the YUV video overlay key.
|
||
|
|
Default: undefined.
|
||
|
|
.TP
|
||
|
|
.BI "Option \*qCacheLines\*q \*q" integer \*q
|
||
|
|
This allows the user to change the amount of graphics memory used for
|
||
|
|
2D acceleration and video. Decreasing this amount leaves more for 3D
|
||
|
|
textures. Increasing it can improve 2D performance at the expense of
|
||
|
|
3D performance.
|
||
|
|
Default: depends on the resolution, depth, and available video memory. The
|
||
|
|
driver attempts to allocate at least enough to hold two DVD-sized YUV buffers
|
||
|
|
by default. The default used for a specific configuration can be found
|
||
|
|
by examining the __xservername__ log file.
|
||
|
|
.TP
|
||
|
|
.BI "Option \*qDRI\*q \*q" boolean \*q
|
||
|
|
Disable or enable DRI support.
|
||
|
|
Default: DRI is enabled for configurations where it is supported.
|
||
|
|
|
||
|
|
.PP
|
||
|
|
The following driver
|
||
|
|
.B Options
|
||
|
|
are supported for the i810 and i815 chipsets:
|
||
|
|
.TP
|
||
|
|
.BI "Option \*qDDC\*q \*q" boolean \*q
|
||
|
|
Disable or enable DDC support.
|
||
|
|
Default: enabled.
|
||
|
|
.TP
|
||
|
|
.BI "Option \*qDac6Bit\*q \*q" boolean \*q
|
||
|
|
Enable or disable 6-bits per RGB for 8-bit modes.
|
||
|
|
Default: 8-bits per RGB for 8-bit modes.
|
||
|
|
.TP
|
||
|
|
.BI "Option \*qXvMCSurfaces\*q \*q" integer \*q
|
||
|
|
This option enables XvMC. The integer parameter specifies the number of
|
||
|
|
surfaces to use. Valid values are 6 and 7.
|
||
|
|
Default: XvMC is disabled.
|
||
|
|
|
||
|
|
.PP
|
||
|
|
The following driver
|
||
|
|
.B Options
|
||
|
|
are supported for the 830M and later chipsets:
|
||
|
|
.TP
|
||
|
|
.BI "Option \*qVBERestore\*q \*q" boolean \*q
|
||
|
|
Enable or disable the use of VBE save/restore for saving and restoring
|
||
|
|
the initial text mode. This is disabled by default because it causes
|
||
|
|
lockups on some platforms. However, there are some cases where it must
|
||
|
|
enabled for the correct restoration of the initial video mode. If you are
|
||
|
|
having a problem with that, try enabling this option. Default: Disabled.
|
||
|
|
.TP
|
||
|
|
.BI "Option \*qVideoKey\*q \*q" integer \*q
|
||
|
|
This is the same as the
|
||
|
|
.B \*qColorKey\*q
|
||
|
|
option described above. It is provided for compatibility with most
|
||
|
|
other drivers.
|
||
|
|
.TP
|
||
|
|
.BI "Option \*qXVideo\*q \*q" boolean \*q
|
||
|
|
Disable or enable XVideo support.
|
||
|
|
Default: XVideo is enabled for configurations where it is supported.
|
||
|
|
.TP
|
||
|
|
.BI "Option \*qMonitorLayout\*q \*q" anystr \*q
|
||
|
|
Allow different monitor configurations. e.g. \*qCRT,LFP\*q will
|
||
|
|
configure a CRT on Pipe A and an LFP on Pipe B. Regardless of the
|
||
|
|
primary heads' pipe it is always configured as \*q<PIPEA>,<PIPEB>\*q.
|
||
|
|
Additionally you can add different configurations such as
|
||
|
|
\*qCRT+DFP,LFP\*q which would put a digital flat panel and a CRT
|
||
|
|
on pipe A, and a local flat panel on pipe B.
|
||
|
|
For single pipe configurations you can just specify the monitors types
|
||
|
|
on Pipe A, such as \*qCRT+DFP\*q which will enable the CRT and DFP
|
||
|
|
on Pipe A.
|
||
|
|
Valid monitors are CRT, LFP, DFP, TV, CRT2, LFP2, DFP2, TV2 and NONE.
|
||
|
|
NOTE: Some configurations of monitor types may fail, this depends on
|
||
|
|
the Video BIOS and system configuration.
|
||
|
|
Default: Not configured, and will use the current head's pipe and monitor.
|
||
|
|
.TP
|
||
|
|
.BI "Option \*qClone\*q \*q" boolean \*q
|
||
|
|
Enable Clone mode on pipe B. This will setup the second head as a complete
|
||
|
|
mirror of the monitor attached to pipe A.
|
||
|
|
NOTE: Video overlay functions will not work on the second head in this mode.
|
||
|
|
If you require this, then use the MonitorLayout above and do (as an example)
|
||
|
|
\*qCRT+DFP,NONE\*q to configure both a CRT and DFP on Pipe A to achieve
|
||
|
|
local mirroring and disable the use of this option.
|
||
|
|
Default: Clone mode on pipe B is disabled.
|
||
|
|
.TP
|
||
|
|
.BI "Option \*qCloneRefresh\*q \*q" integer \*q
|
||
|
|
When the Clone option is specified we can drive the second monitor at a
|
||
|
|
different refresh rate than the primary.
|
||
|
|
Default: 60Hz.
|
||
|
|
.TP
|
||
|
|
.BI "Option \*qCheckLid\*q \*q" boolean \*q
|
||
|
|
On mobile platforms it's desirable to monitor the lid status and switch
|
||
|
|
the outputs accordingly when the lid is opened or closed. By default this
|
||
|
|
option is on, but may incur a very minor performance penalty as we need
|
||
|
|
to poll a register on the card to check for this activity. It can be
|
||
|
|
turned off using this option. This only works with the 830M, 852GM and 855GM
|
||
|
|
systems.
|
||
|
|
Default: enabled.
|
||
|
|
.TP
|
||
|
|
.BI "Option \*qFlipPrimary\*q \*q" boolean \*q
|
||
|
|
When using a dual pipe system, it may be preferable to switch the primary
|
||
|
|
screen to the alternate pipe to display on the other monitor connection.
|
||
|
|
NOTE: Using this option may cause text mode to be restored incorrectly,
|
||
|
|
and thus should be used with caution.
|
||
|
|
Default: disabled.
|
||
|
|
.TP
|
||
|
|
.BI "Option \*qDisplayInfo\*q \*q" boolean \*q
|
||
|
|
It has been found that a certain BIOS call can lockup the Xserver because
|
||
|
|
of a problem in the Video BIOS. The log file will identify if you are
|
||
|
|
suffering from this problem and tell you to turn this option off.
|
||
|
|
Default: enabled
|
||
|
|
.TP
|
||
|
|
.BI "Option \*qDevicePresence\*q \*q" boolean \*q
|
||
|
|
Tell the driver to perform an active detect of the currently connected
|
||
|
|
monitors. This option is useful if the monitor was not connected when
|
||
|
|
the machine has booted, but unfortunately it doesn't always work and
|
||
|
|
is extremely dependent upon the Video BIOS.
|
||
|
|
Default: disabled
|
||
|
|
.TP
|
||
|
|
.BI "Option \*qRotate\*q \*qCW\*q"
|
||
|
|
.TP
|
||
|
|
.BI "Option \*qRotate\*q \*qCCW\*q"
|
||
|
|
Rotate the desktop 90 degrees clockwise or counterclockwise. This option
|
||
|
|
forces the ShadowFB option on, and disables acceleration.
|
||
|
|
Default: no rotation.
|
||
|
|
.TP
|
||
|
|
.BI "Option \*qShadowFB\*q \*q" boolean \*q
|
||
|
|
Enable or disable use of the shadow framebuffer layer. This option
|
||
|
|
disables acceleration. Default: off.
|
||
|
|
|
||
|
|
.SH "SEE ALSO"
|
||
|
|
__xservername__(__appmansuffix__), __xconfigfile__(__filemansuffix__), xorgconfig(__appmansuffix__), Xserver(__appmansuffix__), X(__miscmansuffix__)
|
||
|
|
.SH AUTHORS
|
||
|
|
Authors include: Keith Whitwell, and also Jonathan Bian, Matthew J Sottek,
|
||
|
|
Jeff Hartmann, Mark Vojkovich, Alan Hourihane, H. J. Lu. 830M and 845G
|
||
|
|
support reworked for XFree86 4.3 by David Dawes and Keith Whitwell.
|
||
|
|
852GM, 855GM, and 865G support added by David Dawes and Keith Whitwell.
|
||
|
|
915G and 915GM support added by Alan Hourihane and Keith Whitwell.
|
||
|
|
Dual Head, Clone and lid status support added by Alan Hourihane.
|