1
0
mirror of https://github.com/golang/go synced 2024-11-26 03:47:57 -07:00
go/test
Austin Clements 0f099a4bc5 runtime, cmd: rationalize StackLimit and StackGuard
The current definitions of StackLimit and StackGuard only indirectly
specify the NOSPLIT stack limit and duplicate a literal constant
(928). Currently, they define the stack guard delta, and from there
compute the NOSPLIT limit.

Rationalize these by defining a new constant, abi.StackNosplitBase,
which consolidates and directly specifies the NOSPLIT stack limit (in
the default case). From this we then compute the stack guard delta,
inverting the relationship between these two constants. While we're
here, we rename StackLimit to StackNosplit to make it clearer what's
being limited.

This change does not affect the values of these constants in the
default configuration. It does slightly change how
StackGuardMultiplier values other than 1 affect the constants, but
this multiplier is a pretty rough heuristic anyway.

                    before after
stackNosplit           800   800
_StackGuard            928   928
stackNosplit -race    1728  1600
_StackGuard -race     1856  1728

For #59670.

Change-Id: Ia94094c5e47897e7c088d24b4a5e33f5c2768db5
Reviewed-on: https://go-review.googlesource.com/c/go/+/486976
Auto-Submit: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
2023-04-21 19:28:56 +00:00
..
abi
alias3.dir
asmhdr.dir cmd/compile: use exact constant in go_asm.h 2022-01-10 21:27:19 +00:00
bench test/bench/go1: eliminate start-up time 2022-11-01 17:07:14 +00:00
chan
closure3.dir Revert "cmd/compile: allow more inlining of functions that construct closures" 2023-04-17 21:45:00 +00:00
closure5.dir test: use dot-relative imports where appropriate 2022-03-24 02:14:15 +00:00
codegen cmd/compile: remove memequal call from string compares in more cases 2023-04-18 21:31:33 +00:00
ddd2.dir
dwarf
fixedbugs cmd/compile/internal/types2: only mark variables as used if they are 2023-04-19 14:07:00 +00:00
import2.dir
import4.dir go/types, types2: use "and not used" instead of "but not used" in error messages 2022-09-27 21:10:19 +00:00
interface go/types, types2: more systematic use of Checker.use und useLHS 2023-03-28 14:28:33 +00:00
intrinsic.dir runtime: replace all uses of CtzXX with TrailingZerosXX 2022-10-18 18:06:27 +00:00
ken
linkname.dir test: compile source files as if from "test" module 2022-03-24 17:50:47 +00:00
method4.dir
retjmp.dir
runtime
stress
syntax go/parser: adjustments to error messages 2022-09-01 22:37:04 +00:00
typeparam test: test for issue 53087 2023-03-08 16:23:09 +00:00
uintptrescapes.dir
64bit.go
235.go
alg.go
alias1.go
alias2.go cmd/compile: use "cannot use %s as %s value in %s: %s" error message 2022-09-28 22:28:39 +00:00
alias3.go
alias.go
align.go
append1.go cmd/compile: use "cannot use %s as %s value in %s: %s" error message 2022-09-28 22:28:39 +00:00
append.go
args.go
armimm.go
asmhdr.go
assign1.go
assign.go
atomicload.go
bigalg.go
bigmap.go
blank1.go
blank.go
bom.go
bombad.go
bounds.go
cannotassign.go
chancap.go
chanlinear.go
char_lit1.go
char_lit.go
checkbce.go
clear.go cmd/compile: add clear(x) builtin 2023-01-31 19:43:07 +00:00
clearfat.go
closedchan.go
closure1.go
closure2.go cmd/compile: experimental loop iterator capture semantics change 2023-03-06 18:34:24 +00:00
closure3.go
closure4.go
closure5.go
closure6.go
closure7.go
closure.go
cmp6.go
cmp.go
cmplx.go
cmplxdivide1.go
cmplxdivide.c
cmplxdivide.go
complit1.go
complit.go
compos.go
const1.go
const2.go
const3.go
const4.go
const5.go
const6.go
const7.go all: add wasip1 support 2023-04-11 20:56:32 +00:00
const8.go test: add more tests for const decls with ommitted RHS expressions 2022-06-28 18:11:31 +00:00
const.go
convert1.go
convert2.go go/types, types2: implement slice-to-array conversions 2022-09-08 15:55:44 +00:00
convert3.go
convert4.go cmd/compile: implement slice-to-array conversions 2022-09-19 18:58:26 +00:00
convert.go
convinline.go cmd/compile: handle integer conversions in static init inliner 2022-11-17 13:46:05 +00:00
convlit1.go
convlit.go
convT2X.go
copy1.go
copy.go
crlf.go
ddd1.go cmd/compile: use "cannot use %s as %s value in %s: %s" error message 2022-09-28 22:28:39 +00:00
ddd2.go
ddd.go
decl.go
declbad.go
defer.go
defererrcheck.go
deferfin.go
defernil.go
deferprint.go
deferprint.out
devirt.go
directive2.go cmd/compile: restrict //go:notinheap to runtime/internal/sys 2022-09-02 06:22:23 +00:00
directive.go cmd/compile: restrict //go:notinheap to runtime/internal/sys 2022-09-02 06:22:23 +00:00
divide.go
divmod.go
embedfunc.go
embedvers.go
empty.go
env.go
eof1.go
eof.go
escape2.go
escape2n.go
escape3.go
escape4.go test: enable inlining tests for functions with local type 2023-01-31 20:36:55 +00:00
escape5.go
escape_array.go
escape_calls.go
escape_closure.go
escape_field.go
escape_goto.go
escape_hash_maphash.go
escape_iface_unified.go cmd: remove GOEXPERIMENT=nounified knob 2023-01-25 21:16:32 +00:00
escape_iface.go [dev.unified] test: break escape_iface.go into unified/nounified variants 2022-06-30 18:41:26 +00:00
escape_indir.go
escape_level.go
escape_map.go
escape_param.go
escape_runtime_atomic.go
escape_selfassign.go
escape_slice.go cmd/compile: implement slice-to-array conversions 2022-09-19 18:58:26 +00:00
escape_struct_param1.go
escape_struct_param2.go
escape_struct_return.go
escape_sync_atomic.go
escape_unsafe.go test: fix typo in escape_unsafe.go 2022-09-07 17:25:59 +00:00
escape.go cmd/compile: experimental loop iterator capture semantics change 2023-03-06 18:34:24 +00:00
fibo.go
finprofiled.go
float_lit2.go
float_lit3.go
float_lit.go
floatcmp.go
for.go
func1.go
func2.go
func3.go
func4.go
func5.go
func6.go
func7.go
func8.go
func.go
funcdup2.go
funcdup.go
fuse.go
gc1.go
gc2.go
gc.go
gcgort.go
gcstring.go
goprint.go
goprint.out
goto.go
heapsampling.go test/heapsampling.go: slow down allocation rate and reduce iterations 2022-05-27 21:36:06 +00:00
helloworld.go
helloworld.out
if.go
import1.go go/types, types2: use "and not used" instead of "but not used" in error messages 2022-09-27 21:10:19 +00:00
import2.go
import4.go
import5.go
import6.go test: re-enable most go/tests that were disabled because of types2 differences 2022-01-11 02:26:58 +00:00
import.go
index0.go
index1.go
index2.go
index.go
indirect1.go
indirect.go
init1.go
init.go
initcomma.go
initexp.go cmd/compile: use "init... cycle" instead of "init... loop" in error messages 2022-09-23 20:27:09 +00:00
initialize.go cmd/compile: handle simple inlined calls in staticinit 2022-11-16 04:04:52 +00:00
initializerr.go test: re-enable most go/tests that were disabled because of types2 differences 2022-01-11 02:26:58 +00:00
initloop.go
inline_big.go cmd/compile: flag 'large' functions when -m=2+ in effect 2023-01-24 13:28:54 +00:00
inline_caller.go
inline_callers.go
inline_endian.go cmd/compile: make encoding/binary appends cheaper to inline 2022-09-15 21:05:02 +00:00
inline_literal.go
inline_math_bits_rotate.go
inline_sync.go sync: convert RWMutex.{readerCount,readerWait} to atomic type 2022-09-09 18:28:35 +00:00
inline_unified.go cmd: remove GOEXPERIMENT=nounified knob 2023-01-25 21:16:32 +00:00
inline_variadic.go
inline.go cmd/compile: better code generation for constant-fold switch 2023-04-14 17:58:01 +00:00
int_lit.go
intcvt.go
intrinsic_atomic.go misc, test: fix test error for loong64 2022-05-20 16:16:37 +00:00
intrinsic.go
iota.go
label1.go
label.go
linkmain_run.go all: add wasip1 support 2023-04-11 20:56:32 +00:00
linkmain.go
linkname3.go
linkname.go
linkobj.go all: add wasip1 support 2023-04-11 20:56:32 +00:00
linkx_run.go all: add wasip1 support 2023-04-11 20:56:32 +00:00
linkx.go
literal2.go
literal.go
live1.go
live2.go
live_regabi.go test: test that we schedule OpArgIntReg early 2023-01-21 21:08:30 +00:00
live_uintptrkeepalive.go all: add wasip1 support 2023-04-11 20:56:32 +00:00
live.go cmd/compile: sort liveness variable reports 2023-01-21 21:08:00 +00:00
loopbce.go cmd/compile: make loopbce handle 8, 16 and 32 bit induction variables 2023-01-23 18:10:40 +00:00
mainsig.go
makechan.go
makemap.go
makenew.go
makeslice.go
mallocfin.go
map1.go
map.go
mapclear.go
maplinear.go
maymorestack.go
mergemul.go
method1.go cmd/compile: use "method T.m already declared" for method redeclaration errors 2022-09-27 21:59:19 +00:00
method2.go go/types, types2: better error message when using *interface instead of interface 2022-01-10 22:48:40 +00:00
method3.go
method4.go
method5.go
method6.go
method7.go
method.go
named1.go
named.go
nil.go
nilcheck.go [dev.unified] test: tweak nilcheck test 2022-06-30 18:41:59 +00:00
nilptr2.go
nilptr3.go cmd/compile: casts from slices to array pointers are known to be non-nil 2023-03-29 21:55:11 +00:00
nilptr4.go
nilptr5_aix.go
nilptr5_wasm.go
nilptr5.go cmd/compile: handle partially overlapping assignments 2022-08-23 19:56:32 +00:00
nilptr_aix.go
nilptr.go
noinit.go cmd/compile: reenable inline static init 2023-04-14 17:57:36 +00:00
nosplit.go runtime, cmd: rationalize StackLimit and StackGuard 2023-04-21 19:28:56 +00:00
nowritebarrier.go
nul1.go
opt_branchlikely.go
parentype.go
peano.go
phiopt.go
print.go
print.out
printbig.go
printbig.out
prove_constant_folding.go cmd/compile: fold constants found by prove 2022-05-04 20:30:17 +00:00
prove.go cmd/compile: teach prove about bitwise OR operation 2023-04-10 17:13:41 +00:00
range.go
README.md cmd/dist, test: convert test/run.go runner to a cmd/go test 2023-02-28 01:11:37 +00:00
recover1.go
recover2.go
recover3.go
recover4.go
recover5.go
recover.go
reflectmethod1.go
reflectmethod2.go
reflectmethod3.go
reflectmethod4.go
reflectmethod5.go
reflectmethod6.go
reflectmethod7.go
reflectmethod8.go
rename1.go cmd/compile/internal/types2: only mark variables as used if they are 2023-04-19 14:07:00 +00:00
rename.go
reorder2.go
reorder.go
retjmp.go
return.go
rotate0.go
rotate1.go
rotate2.go
rotate3.go
rotate.go
rune.go
runtime.go
shift1.go
shift2.go
shift3.go cmd/compile: adjust types2 shift check to match go/types (cleanup) 2022-04-07 17:19:55 +00:00
sieve.go
sigchld.go all: add wasip1 support 2023-04-11 20:56:32 +00:00
sigchld.out
simassign.go
sizeof.go
slice3.go
slice3err.go
slicecap.go
sliceopt.go
solitaire.go
stack.go
stackobj2.go
stackobj3.go
stackobj.go
strcopy.go
strength.go
string_lit.go
stringrange.go
struct0.go
switch2.go go/parser: adjustments to error messages 2022-09-01 22:37:04 +00:00
switch3.go
switch4.go
switch5.go
switch6.go cmd/compile: use "missing method m" instead of "missing m method" 2022-09-24 17:04:15 +00:00
switch7.go
switch.go [dev.unified] test: add switch test case for tricky nil handling 2022-07-19 23:30:49 +00:00
tinyfin.go
torture.go
turing.go
typecheck.go test: re-enable most go/tests that were disabled because of types2 differences 2022-01-11 02:26:58 +00:00
typecheckloop.go cmd/compile: use "init... cycle" instead of "init... loop" in error messages 2022-09-23 20:27:09 +00:00
typeswitch1.go
typeswitch2.go
typeswitch2b.go go/types, types2: use "and not used" instead of "but not used" in error messages 2022-09-27 21:10:19 +00:00
typeswitch3.go
typeswitch.go
uintptrescapes2.go
uintptrescapes3.go
uintptrescapes.go
uintptrkeepalive.go cmd/compile: add //go:uintptrkeepalive 2022-04-21 18:06:38 +00:00
undef.go
unsafe_slice_data.go cmd/compile: add support for unsafe.{String,StringData,SliceData} 2022-08-31 17:15:15 +00:00
unsafe_string_data.go cmd/compile: add support for unsafe.{String,StringData,SliceData} 2022-08-31 17:15:15 +00:00
unsafe_string.go cmd/compile: add support for unsafe.{String,StringData,SliceData} 2022-08-31 17:15:15 +00:00
unsafebuiltins.go cmd/compile: add support for unsafe.{String,StringData,SliceData} 2022-08-31 17:15:15 +00:00
used.go
utf.go
varerr.go
varinit.go
winbatch.go
writebarrier.go
zerodivide.go

The test directory contains tests of the Go tool chain and runtime. It includes black box tests, regression tests, and error output tests. They are run as part of all.bash.

To run just these tests, execute:

../bin/go test internal/testdir

To run just tests from specified files in this directory, execute:

../bin/go test internal/testdir -run='Test/(file1.go|file2.go|...)'

Standard library tests should be written as regular Go tests in the appropriate package.

The tool chain and runtime also have regular Go tests in their packages. The main reasons to add a new test to this directory are:

  • it is most naturally expressed using the test runner; or
  • it is also applicable to gccgo and other Go tool chains.