Introduction

Covered in this tutorial:

Assumed knowledge:

Getting Started

At present, you need to have a FreeBSD, Linux, OS X, or Windows machine to run Go. We will use $ to represent the command prompt.

Install Go (see the Installation Instructions).

Make a new directory for this tutorial inside your GOPATH and cd to it:

$ mkdir gowiki
$ cd gowiki

Create a file named wiki.go, open it in your favorite editor, and add the following lines:

package main

import (
	"fmt"
	"io/ioutil"
)

We import the fmt and ioutil packages from the Go standard library. Later, as we implement additional functionality, we will add more packages to this import declaration.

Data Structures

Let's start by defining the data structures. A wiki consists of a series of interconnected pages, each of which has a title and a body (the page content). Here, we define Page as a struct with two fields representing the title and body.

{{code "doc/articles/wiki/part1.go" `/^type Page/` `/}/`}}

The type []byte means "a byte slice". (See Slices: usage and internals for more on slices.) The Body element is a []byte rather than string because that is the type expected by the io libraries we will use, as you'll see below.

The Page struct describes how page data will be stored in memory. But what about persistent storage? We can address that by creating a save method on Page:

{{code "doc/articles/wiki/part1.go" `/^func.*Page.*save/` `/}/`}}

This method's signature reads: "This is a method named save that takes as its receiver p, a pointer to Page . It takes no parameters, and returns a value of type error."

This method will save the Page's Body to a text file. For simplicity, we will use the Title as the file name.

The save method returns an error value because that is the return type of WriteFile (a standard library function that writes a byte slice to a file). The save method returns the error value, to let the application handle it should anything go wrong while writing the file. If all goes well, Page.save() will return nil (the zero-value for pointers, interfaces, and some other types).

The octal integer literal 0600, passed as the third parameter to WriteFile, indicates that the file should be created with read-write permissions for the current user only. (See the Unix man page open(2) for details.)

In addition to saving pages, we will want to load pages, too:

{{code "doc/articles/wiki/part1-noerror.go" `/^func loadPage/` `/^}/`}}

The function loadPage constructs the file name from the title parameter, reads the file's contents into a new variable body, and returns two values: a pointer to a Page literal constructed with the proper title and body values and nil for the error value.

Functions can return multiple values. The standard library function io.ReadFile returns []byte and error. In loadPage, error isn't being handled yet; the "blank identifier" represented by the underscore (_) symbol is used to throw away the error return value (in essence, assigning the value to nothing).

But what happens if ReadFile encounters an error? For example, the file might not exist. We should not ignore such errors. Let's modify the function to return *Page and error.

{{code "doc/articles/wiki/part1.go" `/^func loadPage/` `/^}/`}}

Callers of this function can now check the second parameter; if it is nil then it has successfully loaded a Page. If not, it will be an error that can be handled by the caller (see the language specification for details).

At this point we have a simple data structure and the ability to save to and load from a file. Let's write a main function to test what we've written:

{{code "doc/articles/wiki/part1.go" `/^func main/` `/^}/`}}

After compiling and executing this code, a file named TestPage.txt would be created, containing the contents of p1. The file would then be read into the struct p2, and its Body element printed to the screen.

You can compile and run the program like this:

$ go build wiki.go
$ ./wiki
This is a sample page.

(If you're using Windows you must type "wiki" without the "./" to run the program.)

Click here to view the code we've written so far.

Introducing the net/http package (an interlude)

Here's a full working example of a simple web server:

{{code "doc/articles/wiki/http-sample.go"}}

The main function begins with a call to http.HandleFunc, which tells the http package to handle all requests to the web root ("/") with handler.

It then calls http.ListenAndServe, specifying that it should listen on port 8080 on any interface (":8080"). (Don't worry about its second parameter, nil, for now.) This function will block until the program is terminated.

The function handler is of the type http.HandlerFunc. It takes an http.ResponseWriter and an http.Request as its arguments.

An http.ResponseWriter value assembles the HTTP server's response; by writing to it, we send data to the HTTP client.

An http.Request is a data structure that represents the client HTTP request. r.URL.Path is the path component of the request URL. The trailing [1:] means "create a sub-slice of Path from the 1st character to the end." This drops the leading "/" from the path name.

If you run this program and access the URL:

http://localhost:8080/monkeys

the program would present a page containing:

Hi there, I love monkeys!

Using net/http to serve wiki pages

To use the net/http package, it must be imported:

import (
	"fmt"
	"io/ioutil"
	"net/http"
)

Let's create a handler, viewHandler that will allow users to view a wiki page. It will handle URLs prefixed with "/view/".

{{code "doc/articles/wiki/part2.go" `/^const lenPath/`}} {{code "doc/articles/wiki/part2.go" `/^func viewHandler/` `/^}/`}}

First, this function extracts the page title from r.URL.Path, the path component of the request URL. The global constant lenPath is the length of the leading "/view/" component of the request path. The Path is re-sliced with [lenPath:] to drop the first 6 characters of the string. This is because the path will invariably begin with "/view/", which is not part of the page's title.

The function then loads the page data, formats the page with a string of simple HTML, and writes it to w, the http.ResponseWriter.

Again, note the use of _ to ignore the error return value from loadPage. This is done here for simplicity and generally considered bad practice. We will attend to this later.

To use this handler, we rewrite our main function to initialize http using the viewHandler to handle any requests under the path /view/.

{{code "doc/articles/wiki/part2.go" `/^func main/` `/^}/`}}

Click here to view the code we've written so far.

Let's create some page data (as test.txt), compile our code, and try serving a wiki page.

Open test.txt file in your editor, and save the string "Hello world" (without quotes) in it.

$ go build wiki.go
$ ./wiki

(If you're using Windows you must type "wiki" without the "./" to run the program.)

With this web server running, a visit to http://localhost:8080/view/test should show a page titled "test" containing the words "Hello world".

Editing Pages

A wiki is not a wiki without the ability to edit pages. Let's create two new handlers: one named editHandler to display an 'edit page' form, and the other named saveHandler to save the data entered via the form.

First, we add them to main():

{{code "doc/articles/wiki/final-noclosure.go" `/^func main/` `/^}/`}}

The function editHandler loads the page (or, if it doesn't exist, create an empty Page struct), and displays an HTML form.

{{code "doc/articles/wiki/notemplate.go" `/^func editHandler/` `/^}/`}}

This function will work fine, but all that hard-coded HTML is ugly. Of course, there is a better way.

The html/template package

The html/template package is part of the Go standard library. We can use html/template to keep the HTML in a separate file, allowing us to change the layout of our edit page without modifying the underlying Go code.

First, we must add html/template to the list of imports. We also won't be using fmt anymore, so we have to remove that.

import (
	"html/template"
	"io/ioutil"
	"net/http"
)

Let's create a template file containing the HTML form. Open a new file named edit.html, and add the following lines:

{{code "doc/articles/wiki/edit.html"}}

Modify editHandler to use the template, instead of the hard-coded HTML:

{{code "doc/articles/wiki/final-noerror.go" `/^func editHandler/` `/^}/`}}

The function template.ParseFiles will read the contents of edit.html and return a *template.Template.

The method t.Execute executes the template, writing the generated HTML to the http.ResponseWriter. The .Title and .Body dotted identifiers refer to p.Title and p.Body.

Template directives are enclosed in double curly braces. The printf "%s" .Body instruction is a function call that outputs .Body as a string instead of a stream of bytes, the same as a call to fmt.Printf. The html/template package helps guarantee that only safe and correct-looking HTML is generated by template actions. For instance, it automatically escapes any greater than sign (>), replacing it with >, to make sure user data does not corrupt the form HTML.

Since we're working with templates now, let's create a template for our viewHandler called view.html:

{{code "doc/articles/wiki/view.html"}}

Modify viewHandler accordingly:

{{code "doc/articles/wiki/final-noerror.go" `/^func viewHandler/` `/^}/`}}

Notice that we've used almost exactly the same templating code in both handlers. Let's remove this duplication by moving the templating code to its own function:

{{code "doc/articles/wiki/final-template.go" `/^func renderTemplate/` `/^}/`}} {{code "doc/articles/wiki/final-template.go" `/^func viewHandler/` `/^}/`}} {{code "doc/articles/wiki/final-template.go" `/^func editHandler/` `/^}/`}}

If we comment out the registration of our unimplemented save handler in main, we can once again build and test our program. Click here to view the code we've written so far.

Handling non-existent pages

What if you visit /view/APageThatDoesntExist? You'll see a page containing HTML. This is because it ignores the error return value from loadPage and continues to try and fill out the template with no data. Instead, if the requested Page doesn't exist, it should redirect the client to the edit Page so the content may be created:

{{code "doc/articles/wiki/part3-errorhandling.go" `/^func viewHandler/` `/^}/`}}

The http.Redirect function adds an HTTP status code of http.StatusFound (302) and a Location header to the HTTP response.

Saving Pages

The function saveHandler will handle the submission of forms located on the edit pages. After uncommenting the related line in main, let's implement the the handler:

{{code "doc/articles/wiki/final-template.go" `/^func saveHandler/` `/^}/`}}

The page title (provided in the URL) and the form's only field, Body, are stored in a new Page. The save() method is then called to write the data to a file, and the client is redirected to the /view/ page.

The value returned by FormValue is of type string. We must convert that value to []byte before it will fit into the Page struct. We use []byte(body) to perform the conversion.

Error handling

There are several places in our program where errors are being ignored. This is bad practice, not least because when an error does occur the program will have unintended behavior. A better solution is to handle the errors and return an error message to the user. That way if something does go wrong, the server will function exactly how we want and the user can be notified.

First, let's handle the errors in renderTemplate:

{{code "doc/articles/wiki/final-parsetemplate.go" `/^func renderTemplate/` `/^}/`}}

The http.Error function sends a specified HTTP response code (in this case "Internal Server Error") and error message. Already the decision to put this in a separate function is paying off.

Now let's fix up saveHandler:

{{code "doc/articles/wiki/part3-errorhandling.go" `/^func saveHandler/` `/^}/`}}

Any errors that occur during p.save() will be reported to the user.

Template caching

There is an inefficiency in this code: renderTemplate calls ParseFiles every time a page is rendered. A better approach would be to call ParseFiles once at program initialization, parsing all templates into a single *Template. Then we can use the ExecuteTemplate method to render a specific template.

First we create a global variable named templates, and initialize it with ParseFiles.

{{code "doc/articles/wiki/final.go" `/var templates/`}}

The function template.Must is a convenience wrapper that panics when passed a non-nil error value, and otherwise returns the *Template unaltered. A panic is appropriate here; if the templates can't be loaded the only sensible thing to do is exit the program.

A for loop is used with a range statement to iterate over an array constant containing the names of the templates we want parsed. If we were to add more templates to our program, we would add their names to that array.

We then modify the renderTemplate function to call the templates.ExecuteTemplate method with the name of the appropriate template:

{{code "doc/articles/wiki/final.go" `/func renderTemplate/` `/^}/`}}

Note that the template name is the template file name, so we must append ".html" to the tmpl argument.

Validation

As you may have observed, this program has a serious security flaw: a user can supply an arbitrary path to be read/written on the server. To mitigate this, we can write a function to validate the title with a regular expression.

First, add "regexp" to the import list. Then we can create a global variable to store our validation regexp:

{{code "doc/articles/wiki/final-noclosure.go" `/^var titleValidator/`}}

The function regexp.MustCompile will parse and compile the regular expression, and return a regexp.Regexp. MustCompile is distinct from Compile in that it will panic if the expression compilation fails, while Compile returns an error as a second parameter.

Now, let's write a function, getTitle, that extracts the title string from the request URL, and tests it against our TitleValidator expression:

{{code "doc/articles/wiki/final-noclosure.go" `/func getTitle/` `/^}/`}}

If the title is valid, it will be returned along with a nil error value. If the title is invalid, the function will write a "404 Not Found" error to the HTTP connection, and return an error to the handler. To create a new error, we have to import the errors package.

Let's put a call to getTitle in each of the handlers:

{{code "doc/articles/wiki/final-noclosure.go" `/^func viewHandler/` `/^}/`}} {{code "doc/articles/wiki/final-noclosure.go" `/^func editHandler/` `/^}/`}} {{code "doc/articles/wiki/final-noclosure.go" `/^func saveHandler/` `/^}/`}}

Introducing Function Literals and Closures

Catching the error condition in each handler introduces a lot of repeated code. What if we could wrap each of the handlers in a function that does this validation and error checking? Go's function literals provide a powerful means of abstracting functionality that can help us here.

First, we re-write the function definition of each of the handlers to accept a title string:

func viewHandler(w http.ResponseWriter, r *http.Request, title string)
func editHandler(w http.ResponseWriter, r *http.Request, title string)
func saveHandler(w http.ResponseWriter, r *http.Request, title string)

Now let's define a wrapper function that takes a function of the above type, and returns a function of type http.HandlerFunc (suitable to be passed to the function http.HandleFunc):

func makeHandler(fn func (http.ResponseWriter, *http.Request, string)) http.HandlerFunc {
	return func(w http.ResponseWriter, r *http.Request) {
		// Here we will extract the page title from the Request,
		// and call the provided handler 'fn'
	}
}

The returned function is called a closure because it encloses values defined outside of it. In this case, the variable fn (the single argument to makeHandler) is enclosed by the closure. The variable fn will be one of our save, edit, or view handlers.

Now we can take the code from getTitle and use it here (with some minor modifications):

{{code "doc/articles/wiki/final.go" `/func makeHandler/` `/^}/`}}

The closure returned by makeHandler is a function that takes an http.ResponseWriter and http.Request (in other words, an http.HandlerFunc). The closure extracts the title from the request path, and validates it with the TitleValidator regexp. If the title is invalid, an error will be written to the ResponseWriter using the http.NotFound function. If the title is valid, the enclosed handler function fn will be called with the ResponseWriter, Request, and title as arguments.

Now we can wrap the handler functions with makeHandler in main, before they are registered with the http package:

{{code "doc/articles/wiki/final.go" `/func main/` `/^}/`}}

Finally we remove the calls to getTitle from the handler functions, making them much simpler:

{{code "doc/articles/wiki/final.go" `/^func viewHandler/` `/^}/`}} {{code "doc/articles/wiki/final.go" `/^func editHandler/` `/^}/`}} {{code "doc/articles/wiki/final.go" `/^func saveHandler/` `/^}/`}}

Try it out!

Click here to view the final code listing.

Recompile the code, and run the app:

$ go build wiki.go
$ ./wiki

Visiting http://localhost:8080/view/ANewPage should present you with the page edit form. You should then be able to enter some text, click 'Save', and be redirected to the newly created page.

Other tasks

Here are some simple tasks you might want to tackle on your own: