This document explains how to write a new package, how to test code, and how to contribute changes to the Go project. It assumes you have installed Go and Mercurial using the installation instructions.
Before embarking on a significant change to an existing package or the creation of a major new package, it's a good idea to send mail to the mailing list to let people know what you are thinking of doing. Doing so helps avoid duplication of effort and enables discussions about design before much code has been written.
The source code for the package with import path
x/y is, by convention, kept in the
directory $GOROOT/src/pkg/x/y.
It would be nice to have Go-specific tools that
inspect the source files to determine what to build and in
what order, but for now, Go uses GNU make.
Thus, the first file to create in a new package directory is
usually the Makefile.
The basic form is illustrated by src/pkg/container/vector/Makefile:
include $(GOROOT)/src/Make.$(GOARCH) TARG=container/vector GOFILES=\ intvector.go\ stringvector.go\ vector.go\ include $(GOROOT)/src/Make.pkg
The first and last lines include standard definitions and rules,
so that the body of the Makefile need only specify two variables.
TARG is the target install path for the package,
the string that clients will use to import it.
This string should be the same as the directory
in which the Makefile appears, with the
$GOROOT/src/pkg/ removed.
GOFILES is a list of source files to compile to
create the package. The trailing \ characters
allow the list to be split onto multiple lines
for easy sorting.
After creating a new package directory, add it to the list in
$GOROOT/src/pkg/Makefile so that it
is included in the standard build. Then run:
cd $GOROOT/src/pkg ./deps.bash
to update the dependency file Make.deps.
If you change the imports of an existing package,
you do not need to edit $GOROOT/src/pkg/Makefile
but you will still need to run deps.bash as above.
The first statement in each of the source files listed in the Makefile
should be package name, where name
is the package's default name for imports.
(All files in a package must use the same name.)
Go's convention is that the package name is the last element of the
import path: the package imported as "crypto/rot13"
should be named rot13.
The Go tools impose a restriction that package names are unique
across all packages linked into a single binary, but that restriction
will be lifted soon.
Go compiles all the source files in a package at once, so one file can refer to constants, variables, types, and functions in another file without special arrangement or declarations.
Writing clean, idiomatic Go code is beyond the scope of this document. Effective Go is an introduction to that topic.
Go has a lightweight test framework known as gotest.
You write a test by creating a file with a name ending in _test.go
that contains functions named TestXXX with signature func (t *testing.T).
The test framework runs each such function;
if the function calls a failure function such as t.Error or t.Fail, the test is considered to have failed.
The gotest command documentation
and the testing package documentation give more detail.
The *_test.go files should not be listed in the Makefile.
To run the test, run either make test or gotest
(they are equivalent).
To run only the tests in a single test file, for instance one_test.go,
run gotest one_test.go.
Before sending code out for review, make sure everything still works and the dependencies are right:
cd $GOROOT/src ./all.bash
The final line printed by all.bash should be of the form:
N known bugs; 0 unexpected bugs
The value of N varies over time, but the line must
say “0 unexpected bugs” and must not
add “test output differs.”
Once your new code is tested and working, it's time to get it reviewed and submitted.
Changes to Go must be reviewed before they are submitted, no matter who makes the change. A Mercurial extension helps manage the code review process. The extension is included in the Go source tree but needs to be added to your Mercurial configuration.
Using Mercurial with the code review extension is not the same as using it normally.
TODO(rsc): note here about model being different.
Do not use hg commit if you are using the Mercurial extension.
Edit $GOROOT/.hg/hgrc to add:
[extensions] codereview = YOUR_GO_ROOT/lib/codereview/codereview.py
Replace YOUR_GO_ROOT with the value of $GOROOT.
The Mercurial configuration file format does not allow environment variable substitution.
The code review server uses a Google Account to authenticate. (If you can use the account to sign in at google.com, you can use it to sign in to the code review server.)
$ cd $GOROOT $ hg codereview-login Email (login for uploading to codereview.appspot.com): rsc@golang.org Password for rsc@golang.org: Saving authentication cookies to /Users/rsc/.codereview_upload_cookies_codereview.appspot.com
Edit your code review settings. Grab a nickname. Many people refer to set the Context option to “Whole file” to see more context when reviewing changes.
Once you have chosen a nickname in the settings page, others
can use that nickname as a shorthand for naming reviewers and the CC list.
For example, rsc is an alias for rsc@golang.org.
The entire checked-out tree is writable.
If you need to edit files, just edit them: Mercurial will figure out which ones changed.
You do need to inform Mercurial of added, removed, copied, or renamed files,
by running
hg add,
hg rm,
hg cp,
or
hg mv.
When you are ready to send a change out for review, run
$ hg change
from any directory in your Go repository.
Mercurial will open a change description file in your editor.
(It uses the editor named by the $EDITOR environment variable, vi by default.)
The file will look like:
# Change list. # Lines beginning with # are ignored. # Multi-line values should be indented. Reviewer: CC: Description: <enter description here> Files: src/pkg/math/sin.go src/pkg/math/tan.go src/pkg/regexp/regexp.go
The Reviewer line lists the reviewers assigned
to this change, and the CC line lists people to
notify about the change.
These can be code review nicknames or arbitrary email addresses.
Replace “<enter description here>”
with a description of your change.
The first line of the change description is conventionally
a one-line summary of the change and is used as the
subject for code review mail; the rest of the
description elaborates.
The Files section lists all the modified files
in your client.
It is best to keep unrelated changes in different change lists.
In this example, we can include just the changes to package math
by deleting the line mentioning regexp.go.
If we did so, the template would now read:
# Change list. # Lines beginning with # are ignored. # Multi-line values should be indented. Reviewer: r, rsc CC: math-nuts@swtch.com Description: Sin, Cos, Tan: improved precision for very large arguments See Bimmler and Shaney, ``Extreme sinusoids,'' J. Math 3(14). Fixes issue 159. Files: src/pkg/math/sin.go src/pkg/math/tan.go
The special sentence “Fixes issue 159.” associates the change with issue 159 in the Go issue tracker. When this change is eventually submitted, the issue tracker will automatically mark the issue as fixed.
Save the file and exit the editor.
The code review server assigns your change an issue number and URL,
which hg change will print, something like:
CL created: http://codereview.appspot.com/99999
If you need to re-edit the change description,
run hg change 99999.
You can see a list of your pending changes by running hg pending (hg p for short).
While you were working, others might have submitted changes to the repository. To update your client, run
$ hg sync
(For Mercurial fans, hg sync runs hg pull -u
but then also synchronizes the local change list state against the new data.)
If files you were editing have changed, Mercurial does its best to merge the remote changes into your local changes. It may leave some files to merge by hand.
TODO(rsc): add example of merge
To send out a change for review, run hg mail using the change list number
assigned during hg change:
$ hg mail 99999
You can add to the Reviewer: and CC: lines
using the -ror --cc options.
The above example could have left the Reviewer and CC
lines blank and then run:
$ hg mail -r r,rsc --cc math-nuts@swtch.com 99999
to achieve the same effect.
Note that -r and --cc cannot be spelled --r or -cc.
Running hg mail will send an email to you and the reviewers
asking them to visit the issue's URL and make coments on the change.
When done, the reviewer clicks “Publish and Mail comments”
to send comments back.
You will probably revise your code in response to the reviewer comments. When you have revised the code and are ready for another round of review, run
$ hg upload 99999
to upload the latest copy.
You might also visit the code review web page and reply to the comments,
letting the reviewer know that you've addressed them or explain why you
haven't. When you're done replying, click “Publish and Mail comments”
to send the line-by-line replies and any other comments.
A common acronym in such mails is PTAL: please take another look.
The reviewer can comment on the new copy, and the process repeats.
The reviewer approves the change by replying with a mail that says
LGTM: looks good to me.
Once the code has been LGTM'ed, it is time to submit
it to the Mercurial repository.
If you are a committer, you can run:
$ hg submit 99999
This checks the change into the repository. The change description will include a link to the code review, and the code review will be updated with a link to the change in the repository.
If your local copy of the repository is out of date,
hg submit
will refuse the change:
$ hg submit 12345678 local repository out of date; must sync before submit
If you are not a committer, you cannot submit the change directly.
Instead, a committer, usually the reviewer who said LGTM,
will run:
$ hg clpatch 99999 $ hg submit 99999
The clpatch command imports your change 99999 into
the committer's local Mercurial client, at which point the committer
can check or test the code more.
(Anyone can run clpatch to try a change that
has been uploaded to the code review server.)
The submit command submits the code. You will be listed as the
author, but the change message will also indicate who the committer was.
The standard copyright header for files in the Go tree is:
// Copyright 2009 The Go Authors. All rights reserved. // Use of this source code is governed by a BSD-style // license that can be found in the LICENSE file.
Code you contribute should have this header.
You need to be listed in the
CONTRIBUTORS file,
which defines who the Go contributors—the people—are;
and the copyright holder for the code you submit (either you or the
organization you work for) needs to be listed in the
AUTHORS file, which defines
who “The Go Authors”—the copyright holders—are.
When sending your first change list, you should prepare
and send a separate change list adding yourself to
CONTRIBUTORS and adding
the copyright holder for your code to AUTHORS if not already listed.
If you are the copyright holder, you will need to agree to
the individual contributor license agreement,
which can be completed online;
if your organization is the copyright holder, the organization
will need to agree to the corporate contributor license agreement.
If the copyright holder for your code has already completed the
agreement in connection with another Google open source project,
it does not need to be completed again.
One of the Go developers at Google will approve and submit
this change after checking the list of people/organizations
that have completed the agreement.