Go 1.11 is not yet released. These are work-in-progress release notes. Go 1.11 is expected to be released in August 2018.
The latest Go release, version 1.11, arrives six months after Go 1.10. Most of its changes are in the implementation of the toolchain, runtime, and libraries. As always, the release maintains the Go 1 promise of compatibility. We expect almost all Go programs to continue to compile and run as before.
There are no changes to the language specification.
As announced in the Go 1.10 release notes, Go 1.11 now requires OpenBSD 6.2 or later, macOS 10.10 Yosemite or later, or Windows 7 or later; Support for previous versions of these operating systems has been removed.
Go 1.11 supports the upcoming OpenBSD 6.4 release. Due to changes in the OpenBSD kernel, older versions of Go will not work on OpenBSD 6.4.
There are known issues with NetBSD on i386 hardware.
The race detector is now supported on linux/ppc64le
and, to a lesser extent, on netbsd/amd64. The NetBSD race detector support
has known issues.
The memory sanitizer (-msan) is now supported on linux/arm64.
The build modes c-shared and c-archive are now supported on
freebsd/amd64.
On 64-bit MIPS systems, the new environment variable settings
GOMIPS64=hardfloat (the default) and
GOMIPS64=softfloat select whether to use
hardware instructions or software emulation for floating-point computations.
For 32-bit systems, the environment variable is still GOMIPS,
as added in Go 1.10.
On soft-float ARM systems (GOARM=5), Go now uses a more
efficient software floating point interface. This is transparent to
Go code, but ARM assembly that uses floating-point instructions not
guarded on GOARM will break and must be ported to
the new interface.
Go 1.11 on ARMv7 no longer requires a Linux kernel configured
with KUSER_HELPERS. This setting is enabled in default
kernel configurations, but is sometimes disabled in stripped-down
configurations.
Go 1.11 adds an experimental port to WebAssembly (js/wasm).
Go programs currently compile to one WebAssembly module that
includes the Go runtime for goroutine scheduling, garbage
collection, maps, etc.
As a result, the resulting size is at minimum around
2 MB, or 500 KB compressed. Go programs can call into JavaScript
using the new experimental
syscall/js package.
Binary size and interop with other languages has not yet been a
priority but may be addressed in future releases.
As a result of the addition of the new GOOS value
"js" and GOARCH value "wasm",
Go files named *_js.go or *_wasm.go will
now be ignored by Go
tools except when those GOOS/GOARCH values are being used.
If you have existing filenames matching those patterns, you will need to rename them.
The main Go compiler does not yet support the RISC-V architecture
but we've reserved the GOARCH values
"riscv" and "riscv64", as used by Gccgo,
which does support RISC-V. This means that Go files
named *_riscv.go will now also
be ignored by Go
tools except when those GOOS/GOARCH values are being used.
NOTE: This is not present in go1.11beta1 but will be available in future betas and subsequent releases. Go 1.11 adds experimental support for a new concept called “modules,” an alternative to GOPATH with integrated support for versioning and package distribution. Using modules, developers are no longer confined to working inside GOPATH, version dependency information is explicit yet lightweight, and builds are more reliable and reproducible.
Module support is considered experimental. Details are likely to change in response to feedback from Go 1.11 users, and we have more tools planned. Although the details of module support may change, projects that convert to modules using Go 1.11 will continue to work with Go 1.12 and later. If you encounter bugs using modules, please file issues so we can fix them.
TODO: Link to intro doc.
Because Go module support assigns special meaning to the
@ symbol in command line operations,
the go command now disallows the use of
import paths containing @ symbols.
Such import paths were never allowed by go get,
so this restriction can only affect users building
custom GOPATH trees by other means.
TODO: Note about go/build versus golang.org/x/tools/go/packages.
Go 1.11 will be the last release to support setting the environment
variable GOCACHE=off to disable the
build cache,
introduced in Go 1.10.
Starting in Go 1.12, the build cache will be required,
as a step toward eliminating $GOPATH/pkg.
The module and package loading support described above
already require that the build cache be enabled.
If you have disabled the build cache to avoid problems you encountered,
please file an issue to let us know about them.
More functions are now eligible for inlining by default, including
functions that call panic.
The compiler toolchain now supports column information in line directives.
A new package export data format has been introduced.
This should be transparent to end users, except for speeding up
build times for large Go projects.
If it does cause problems, it can be turned off again by
passing -gcflags=all=-iexport=false to
the go tool when building a binary.
The compiler now rejects unused variables declared in a type switch
guard, such as x in the following example:
func f(v interface{}) {
switch x := v.(type) {
}
}
This was already rejected by both gccgo
and go/types.
The assembler for amd64 now accepts AVX512 instructions.
The compiler now produces significantly more accurate debug
information for optimized binaries, including variable location
information, line numbers, and breakpoint locations.
This should make it possible to debug binaries
compiled without -N -l.
There are still limitations to the quality of the debug information,
some of which are fundamental, and some of which will continue to
improve with future releases.
DWARF sections are now compressed by default because of the expanded
and more accurate debug information produced by the compiler.
This is transparent to most ELF tools (such as debuggers on Linux
and *BSD) and is supported by the Delve debugger on all platforms,
but has limited support in the native tools on macOS and Windows.
To disable DWARF compression,
pass -ldflags=-compressdwarf=false to
the go tool when building a binary.
Go 1.11 adds experimental support for calling Go functions from
within a debugger.
This is useful, for example, to call String methods
when paused at a breakpoint.
This is currently only supported by Delve.
Since Go 1.10, the go test command runs
go vet on the package being tested,
to identify problems before running the test. Since vet
typechecks the code with go/types
before running, tests that do not typecheck will now fail.
In particular, tests that contain an unused variable inside a
closure compiled with Go 1.10, because the Go compiler incorrectly
accepted them (Issue #3059),
but will now fail, since go/types correctly reports an
"unused variable" error in this case.
The -memprofile flag
to go test now defaults to the
"allocs" profile, which records the total bytes allocated since the
test began (including garbage-collected bytes).
The go vet
command now reports a fatal error when the package under analysis
does not typecheck. Previously, a type checking error simply caused
a warning to be printed, and vet to exit with status 1.
The runtime now uses a sparse heap layout so there is no longer a
limit to the size of the Go heap (previously, the limit was 512GiB).
This also fixes rare "address space conflict" failures in mixed Go/C
binaries or binaries compiled with -race.
On macOS and iOS, the runtime now uses libSystem.so instead of
calling the kernel directly. This should make Go binaries more
compatible with future versions of macOS and iOS.
The syscall package still makes direct
system calls; fixing this is planned for a future release.
All of the changes to the standard library are minor.
As always, there are various minor changes and updates to the library, made with the Go 1 promise of compatibility in mind.
Certain crypto operations, including
ecdsa.Sign,
rsa.EncryptPKCS1v15 and
rsa.GenerateKey,
now randomly read an extra byte of randomness to ensure tests don't rely on internal behavior.
The new function NewGCMWithTagSize
implements Galois Counter Mode with non-standard tag lengths for compatibility with existing cryptosystems.
ConnectionState's new
ExportKeyingMaterial field allows exporting keying material bound to the
connection according to RFC 5705.
The deprecated, legacy behavior of treating the CommonName field as
a hostname when no Subject Alternative Names are present is now disabled when the CN is not a
valid hostname.
The CommonName can be completely ignored by adding the experimental value
x509ignoreCN=1 to the GODEBUG environment variable.
When the CN is ignored, certificates without SANs validate under chains with name constraints
instead of returning NameConstraintsWithoutSANs.
Extended key usage restrictions are again checked only if they appear in the KeyUsages
field of VerifyOptions, instead of always being checked.
This matches the behavior of Go 1.9 and earlier.
The value returned by SystemCertPool
is now cached and might not reflect system changes between invocations.
TODO: https://golang.org/cl/112115: add machine and OSABI constants
TODO: https://golang.org/cl/110561: allow Marshaling and Unmarshaling private tag class
TODO: https://golang.org/cl/112516: handle surplus padding consistently
TODO: https://golang.org/cl/99696: disallow quote for use as Comma
TODO: https://golang.org/cl/100235: report errors for incorrect line directives
TODO: https://golang.org/cl/121815: ignore untyped nil arguments to default escapers
TODO: https://golang.org/cl/93076: support non-looping animated gifs (LoopCount=-1)
TODO: https://golang.org/cl/105675: change TempFile prefix to a pattern
TODO: https://golang.org/cl/74851: speed-up addMulVVW on amd64
ModInverse now returns nil when g and n are not relatively prime. The result was previously undefined.
TODO: https://golang.org/cl/121055: restore 1.9 handling of missing/empty form-data file name
To support invalid input found in the wild, the package now permits non-ASCII bytes but does not validate their encoding.
The new ListenConfig type and the new
Dialer.Control field permit
setting socket options before accepting and creating connections, respectively.
TODO: https://golang.org/cl/76391: implement (*syscall.RawConn).Read/Write on Windows
The net package now automatically uses the
splice system call
on Linux when calling copying data between TCP connections in
TCPConn.ReadFrom, as called by
io.Copy. The result is faster, more efficient TCP proxying.
TODO: https://golang.org/cl/108297: calling File leaves the socket in nonblocking mode
The Transport has a
new MaxConnsPerHost
option that permits limiting the maximum number of connections
per host.
The Cookie type has a new
The SameSite field
(of new type also named
SameSite) to represent the new cookie attribute recently supported by most browsers.
The net/http's Transport does not use the SameSite
attribute itself, but the package supports parsing and serializing the
attribute for browsers to use.
It is no longer allowed to reuse a Server
after a call to
Shutdown or
Close. It was never officially supported
in the past and had often surprising behavior. Now, all future calls to the server's Serve
methods will return errors after a shutdown or close.
The HTTP server will no longer automatically set the Content-Type if a
Handler sets the "X-Content-Type-Options" header to "nosniff".
The constant StatusMisdirectedRequest is now defined for HTTP status code 421.
The HTTP server will no longer cancel contexts or send on
CloseNotifier
channels upon receiving pipelined HTTP/1.1 requests. Browsers do
not use HTTP pipelining, but some clients (such as
Debian's apt) may be configured to do so.
ProxyFromEnvironment, which is used by the
DefaultTransport, now
supports CIDR notation and ports in the NO_PROXY environment variable.
The
ReverseProxy
has a new
ErrorHandler
option to permit changing how errors are handled.
The new UserCacheDir function
returns the default root directory to use for user-specific cached data.
The new ModeIrregular
is a FileMode bit to represent
that a file is not a regular file, but nothing else is known about it, or that
it's not a socket, device, named pipe, symlink, or other file type for which
Go has a defined mode bit.
TODO: https://golang.org/cl/99337: enable symlink creation on Windows 10
TODO: https://golang.org/cl/100077: use poller when NewFile is called with a blocking descriptor.
The new Ignored function reports
whether a signal is currently ignored.
The os/user package can now be built in pure Go
mode using the build tag "osusergo",
independent of the use of the environment
variable CGO_ENABLED=0. Previously the only way to use
the package's pure Go implementation was to disable cgo
support across the entire program.
TODO: https://golang.org/cl/106156: use fixed TLS offsets on darwin/amd64 and darwin/386
Setting the GODEBUG=tracebackancestors=N
environment variable now extends tracebacks with the stacks at
which goroutines were created, where N limits the
number of ancestor goroutines to report.
This release adds a new "allocs" profile type that profiles
total number of bytes allocated since the program began
(including garbage-collected bytes). This is identical to the
existing "heap" profile viewed in -alloc_space mode.
Now go test -memprofile=... reports an "allocs" profile
instead of "heap" profile.
TODO: https://golang.org/cl/63274: user annotation API
The mutex profile now includes reader/writer contention
for RWMutex.
Writer/writer contention was already included in the mutex
profile.
On Windows, several fields were changed from uintptr to a new
Pointer
type to avoid problems with Go's garbage collector. The same change was made
to the golang.org/x/sys/windows
package. For any code affected, users should first migrate away from the syscall
package to the golang.org/x/sys/windows package, and then change
to using the Pointer, while obeying the
unsafe.Pointer conversion rules.
On Linux, the flags parameter to
Fchmodat
is now validated. Linux's fchmodat doesn't support the flags parameter
so we now mimic glibc's behavior and return an error if it's non-zero.
TODO: https://golang.org/cl/112037: return RawString token rather than String for raw string literals
TODO: https://golang.org/cl/84480: add variable assignments
TODO: https://golang.org/cl/95215: differentiate nil from missing arg
Parsing of timezones denoted by sign and offset is now
supported. In previous versions, numeric timezone names
(such as +03) were not considered valid, and only
three-letter abbreviations (such as MST) were accepted
when expecting a timezone name.