Go 1.10 is not yet released. These are work-in-progress release notes. Go 1.10 is expected to be released in February 2018.
The latest Go release, version 1.10, arrives six months after go1.9. Most of its changes are in the implementation of the toolchain, runtime, and libraries. As always, the release maintains the Go 1 promise of compatibility. We expect almost all Go programs to continue to compile and run as before.
OVERVIEW HERE
There are no significant changes to the language.
A corner case involving shifts by untyped constants has been clarified,
and as a result the compilers have been updated to allow the index expression
x[1.0 << s] where s is an untyped constant;
the go/types package already did.
The grammar for method expressions has been updated to relax the
syntax to allow any type expression as a receiver;
this matches what the compilers were already implementing.
For example, struct{io.Reader}.Read is a valid, if unusual,
method expression that the compilers already accepted and is
now permitted by the language grammar.
There are no new supported operating systems or processor architectures in this release. Most of the work has focused on strengthening the support for existing ports, in particular new instructions in the assembler and improvements to the code generated by the compilers.
As announced in the Go 1.9 release notes, Go 1.10 now requires FreeBSD 10.3 or later; support for FreeBSD 9.3 has been removed.
Go now runs on NetBSD again but requires the unreleased NetBSD 8.
Only GOARCH amd64 and 386 have
been fixed. The arm port is still broken.
On 32-bit MIPS systems, the new environment variable settings
GOMIPS=hardfloat (the default) and
GOMIPS=softfloat select whether to use
hardware instructions or software emulation for floating-point computations.
Go 1.10 is the last release that will run on OpenBSD 6.0. Go 1.11 will require OpenBSD 6.2.
Go 1.10 is the last release that will run on OS X 10.8 Mountain Lion or OS X 10.9 Mavericks. Go 1.11 will require OS X 10.10 Yosemite or later.
Go 1.10 is the last release that will run on Windows XP or Windows Vista. Go 1.11 will require Windows 7 or later.
If the environment variable $GOROOT is unset,
the go tool previously used the default GOROOT
set during toolchain compilation.
Now, before falling back to that default, the go tool attempts to
deduce GOROOT from its own executable path.
This allows binary distributions to be unpacked anywhere in the
file system and then be used without setting GOROOT
explicitly.
By default, the go tool creates its temporary files and directories
in the system temporary directory (for example, $TMPDIR on Unix).
If the new environment variable $GOTMPDIR is set,
the go tool will creates its temporary files and directories in that directory instead.
The go build command now detects out-of-date packages
purely based on the content of source files, specified build flags, and metadata stored in the compiled packages.
Modification times are no longer consulted or relevant.
The old advice to add -a to force a rebuild in cases where
the modification times were misleading for one reason or another
(for example, changes in build flags) is no longer necessary:
builds now always detect when packages must be rebuilt.
(If you observe otherwise, please file a bug.)
The go build -asmflags, -gcflags, -gccgoflags, and -ldflags options
now apply by default only to the packages listed directly on the command line.
For example, go build -gcflags=-m mypkg
passes the compiler the -m flag when building mypkg
but not its dependencies.
The new, more general form -asmflags=pattern=flags (and similarly for the others)
applies the flags only to the packages matching the pattern.
For example: go install -ldflags=cmd/gofmt=-X=main.version=1.2.3 cmd/...
installs all the commands matching cmd/... but only applies the -X option
to the linker flags for cmd/gofmt.
For more details, see go help build.
The go build command now maintains a cache of
recently built packages, separate from the installed packages in $GOROOT/pkg or $GOPATH/pkg.
The effect of the cache should be to speed builds that do not explicitly install packages
or when switching between different copies of source code (for example, when changing
back and forth between different branches in a version control system).
The old advice to add the -i flag for speed, as in go build -i
or go test -i,
is no longer necessary: builds run just as fast without -i.
For more details, see go help cache.
The go install command now installs only the
packages and commands listed directly on the command line.
For example, go install cmd/gofmt
installs the gofmt program but not any of the packages on which it depends.
The new build cache makes future commands still run as quickly as if the
dependencies had been installed.
To force the installation of dependencies, use the new
go install -i flag.
Installing dependency packages should not be necessary in general,
and the very concept of installed packages may disappear in a future release.
Many details of the go build implementation have changed to support these improvements.
One new requirement implied by these changes is that
binary-only packages must now declare accurate import blocks in their
stub source code, so that those imports can be made available when
linking a program using the binary-only package.
For more details, see go help filetype.
The go test command now caches test results:
if the test executable and command line match a previous run
and the files and environment variables consulted by that run
have not changed either, go test will print
the previous test output, replacing the elapsed time with the string “(cached).”
Test caching applies only to successful test results;
only to go test
commands with an explicit list of packages; and
only to command lines using a subset of the
-cpu, -list, -parallel,
-run, -short, and -v test flags.
The idiomatic way to bypass test caching is to use -count=1.
The go test command now automatically runs
go vet on the package being tested,
to identify significant problems before running the test.
Any such problems are treated like build errors and prevent execution of the test.
Only a high-confidence subset of the available go vet
checks are enabled for this automatic check.
To disable the running of go vet, use
go test -vet=off.
The go test -coverpkg flag now
interprets its argument as a comma-separated list of patterns to match against
the dependencies of each test, not as a list of packages to load anew.
For example, go test -coverpkg=all
is now a meaningful way to run a test with coverage enabled for the test package
and all its dependencies.
Also, the go test -coverprofile option is now
supported when running multiple tests.
In case of failure due to timeout, tests are now more likely to write their profiles before exiting.
The go test command now always
merges the standard output and standard error from a given test binary execution
and writes both to go test's standard output.
In past releases, go test only applied this
merging most of the time.
The go test -v output
now includes PAUSE and CONT status update
lines to mark when parallel tests pause and continue.
The new go test -failfast flag
disables running additional tests after any test fails.
Note that tests running in parallel with the failing test are allowed to complete.
Finally, the new go test -json flag
filters test output through the new command
go tool test2json
to produce a machine-readable JSON-formatted description of test execution.
This allows the creation of rich presentations of test execution
in IDEs and other tools.
For more details about all these changes,
see go help test
and the test2json documentation.
Cgo now implements a C typedef like “typedef X Y;” using a Go type alias,
so that Go code may use the types C.X and C.Y interchangeably.
It also now supports the use of niladic function-like macros.
Also, the documentation has been updated to clarify that
Go structs and Go arrays are not supported in the type signatures of cgo-exported functions.
TODO: CL 70890 "permit passing string values directly between Go and C."
During toolchain bootstrap, the environment variables CC and CC_FOR_TARGET specify
the default C compiler that the resulting toolchain will use for host and target builds, respectively.
However, if the toolchain will be used with multiple targets, it may be necessary to specify a different C compiler for each
(for example, a different compiler for darwin/arm64 versus linux/ppc64le).
The new set of environment variables CC_FOR_goos_goarch
allows specifying a different default C compiler for each target.
Note that these variables only apply during toolchain bootstrap,
to set the defaults used by the resulting toolchain.
Later go build commands refer to the CC environment
variable or else the built-in default.
Cgo now translates some C types that would normally map to a pointer
type in Go, to a uintptr instead. These types include
the CFTypeRef hierarchy in Darwin's CoreFoundation
framework and the jobject hierarchy in Java's JNI
interface.
These types must be uintptr on the Go side because they
would otherwise confuse the Go garbage collector; they are sometimes
not really pointers but data structures encoded in a pointer type.
Because of this change, values of the affected types need to be
zero-initialized with the constant 0 instead of the
constant nil. Go 1.10 provides gofix
modules to help with that rewrite:
go tool fix -r cftype <pkg> go tool fix -r jni <pkg>
For more details, see the cgo documentation.
The go doc tool now adds functions returning slices of T or *T
to the display of type T, similar to the existing behavior for functions returning single T or *T results.
For example:
$ go doc mail.Address
package mail // import "net/mail"
type Address struct {
Name string
Address string
}
Address represents a single mail address.
func ParseAddress(address string) (*Address, error)
func ParseAddressList(list string) ([]*Address, error)
func (a *Address) String() string
$
Previously, ParseAddressList was only shown in the package overview (go doc mail).
The go fix tool now replaces imports of "golang.org/x/net/context"
with "context".
(Forwarding aliases in the former make it completely equivalent to the latter when using Go 1.9 or later.)
The go get command now supports Fossil source code repositories.
The blocking and mutex profiles produced by the runtime/pprof package
now include symbol information, so they can be viewed
in go tool pprof
without the binary that produced the profile.
(All other profile types were changed to include symbol information in Go 1.9.)
The go tool pprof
profile visualizer has been updated to git version 9e20b5b (2017-11-08)
from github.com/google/pprof,
which includes an updated web interface.
The go vet command now always has access to
complete, up-to-date type information when checking packages, even for packages using cgo or vendored imports.
The reports should be more accurate as a result.
Note that only go vet has access to this information;
the more low-level go tool vet does not
and should be avoided except when working on vet itself.
(As of Go 1.9, go vet provides access to all the same flags as
go tool vet.)
This release includes a new overview of available Go program diagnostic tools.
Two minor details of the default formatting of Go source code have changed.
First, certain complex three-index slice expressions previously formatted like
x[i+1 : j:k] and now
format with more consistent spacing: x[i+1 : j : k].
Second, single-method interface literals written on a single line,
which are sometimes used in type assertions,
are no longer split onto multiple lines.
Note that these kinds of minor updates to gofmt are expected from time to time. In general, we recommend against building systems that check that source code matches the output of a specific version of gofmt. For example, a continuous integration test that fails if any code already checked into a repository is not “properly formatted” is inherently fragile and not recommended.
If multiple programs must agree about which version of gofmt is used to format a source file,
we recommend that they do this by arranging to invoke the same gofmt binary.
For example, in the Go open source repository, our Git pre-commit hook is written in Go
and could import go/format directly but instead invokes the gofmt
binary found in the current path, so that the pre-commit hook need not be recompiled
each time gofmt changes.
The compiler includes many improvements to the performance of generated code, spread fairly evenly across the supported architectures.
The DWARF debug information recorded in binaries has been improved in a few ways: constant values are now recorded; line number information is more accurate, making source-level stepping through a program work better; and each package is now presented as its own DWARF compilation unit.
The various build modes
has been ported to more systems.
Specifically, c-shared now works on linux/ppc64le, windows/386, and windows/amd64;
pie now works on darwin/amd64 and also forces the use of external linking on all systems;
and plugin now works on linux/ppc64le and darwin/amd64.
The linux/ppc64le port now requires the use of external linking
with any programs that use cgo, even uses by the standard library.
For the ARM 32-bit port, the assembler now supports the instructions
BFC,
BFI,
BFX,
BFXU,
FMULAD,
FMULAF,
FMULSD,
FMULSF,
FNMULAD,
FNMULAF,
FNMULSD,
FNMULSF,
MULAD,
MULAF,
MULSD,
MULSF,
NMULAD,
NMULAF,
NMULD,
NMULF,
NMULSD,
NMULSF,
XTAB,
XTABU,
XTAH,
and
XTAHU.
For the ARM 64-bit port, the assembler now supports the
VADD,
VADDP,
VADDV,
VAND,
VCMEQ,
VDUP,
VEOR,
VLD1,
VMOV,
VMOVI,
VMOVS,
VORR,
VREV32,
and
VST1
instructions.
For the PowerPC 64-bit port, the assembler now supports the POWER9 instructions
ADDEX,
CMPEQB,
COPY,
DARN,
LDMX,
MADDHD,
MADDHDU,
MADDLD,
MFVSRLD,
MTVSRDD,
MTVSRWS,
PASTECC,
VCMPNEZB,
VCMPNEZBCC,
and
VMSUMUDM.
For the S390X port, the assembler now supports the
TMHH,
TMHL,
TMLH,
and
TMLL
instructions.
For the X86 64-bit port, the assembler now supports 359 new instructions,
including the full AVX, AVX2, BMI, BMI2, F16C, FMA3, SSE2, SSE3, SSSE3, SSE4.1, and SSE4.2 extension sets.
The assembler also no longer implements MOVL $0, AX
as an XORL instruction,
to avoid clearing the condition flags unexpectedly.
TODO: Words about GCC 8 and Go 1.10.
The behavior of nested calls to
LockOSThread and
UnlockOSThread
has changed.
These functions control whether a goroutine is locked to a specific operating system thread,
so that the goroutine only runs on that thread, and the thread only runs that goroutine.
Previously, calling LockOSThread more than once in a row
was equivalent to calling it once, and a single UnlockOSThread
always unlocked the thread.
Now, the calls nest: if LockOSThread is called multiple times,
UnlockOSThread must be called the same number of times
in order to unlock the thread.
Existing code that was careful not to nest these calls will remain correct.
Existing code that incorrectly assumed the calls nested will become correct.
Most uses of these functions in public Go source falls into the second category.
Because one common use of LockOSThread and UnlockOSThread
is to allow Go code to reliably modify thread-local state (for example, Linux or Plan 9 name spaces),
the runtime now treats locked threads as unsuitable for reuse or for creating new threads.
Stack traces no longer include implicit wrapper functions (previously marked <autogenerated>),
unless a fault or panic happens in the wrapper itself.
As a result, skip counts passed to functions like Caller
should now always match the structure of the code as written, rather than depending on
optimization decisions and implementation details.
The garbage collector has been modified to reduce its impact on allocation latency. It now uses a smaller fraction of the overall CPU when running, but it may run more of the time. The total CPU consumed by the garbage collector has not changed significantly.
The GOROOT function
now defaults (when the $GOROOT environment variable is not set)
to the GOROOT or GOROOT_FINAL in effect
at the time the calling program was compiled.
Previously it used the GOROOT or GOROOT_FINAL in effect
at the time the toolchain that compiled the calling program was compiled.
There is no longer a limit on the GOMAXPROCS setting.
(In Go 1.9 the limit was 1024.)
As always, the changes are so general and varied that precise statements about performance are difficult to make. Most programs should run a bit faster, due to speedups in the garbage collector, better generated code, and optimizations in the core library.
Many applications should experience significantly lower allocation latency and overall performance overhead when the garbage collector is active.
All of the changes to the standard library are minor. The changes in bytes and net/url are the most likely to require updating of existing programs.
As always, there are various minor changes and updates to the library, made with the Go 1 promise of compatibility in mind.
In general, the handling of special header formats is significantly improved and expanded.
FileInfoHeader has always
recorded the Unix UID and GID numbers from its os.FileInfo argument
(specifically, from the system-dependent information returned by the FileInfo's Sys method)
in the returned Header.
Now it also records the user and group names corresponding to those IDs,
as well as the major and minor device numbers for device files.
The new Header.Format field
of type Format
controls which tar header format the Writer uses.
The default, as before, is to select the most widely-supported header type
that can encode the fields needed by the header (USTAR if possible, or else PAX if possible, or else GNU).
The Reader sets Header.Format for each header it reads.
Reader and the Writer now support arbitrary PAX records,
using the new Header.PAXRecords field,
a generalization of the existing Xattrs field.
The Reader no longer insists that the file name or link name in GNU headers
be valid UTF-8.
When writing PAX- or GNU-format headers, the Writer now includes
the Header.AccessTime and Header.ChangeTime fields (if set).
When writing PAX-format headers, the times include sub-second precision.
Go 1.10 adds more complete support for times and character set encodings in ZIP archives.
The original ZIP format used the standard MS-DOS encoding of year, month, day, hour, minute, and second into fields in two 16-bit values.
That encoding cannot represent time zones or odd seconds, so multiple extensions have been
introduced to allow richer encodings.
In Go 1.10, the Reader and Writer
now support the widely-understood Info-Zip extension that encodes the time separately in the 32-bit Unix “seconds since epoch” form.
The FileHeader's new Modified field of type time.Time
obsoletes the ModifiedTime and ModifiedDate fields, which continue to hold the MS-DOS encoding.
The Reader and Writer now adopt the common
convention that a ZIP archive storing a time zone-independent Unix time
also stores the local time in the MS-DOS field,
so that the time zone offset can be inferred.
For compatibility, the ModTime and
SetModTime methods
behave the same as in earlier releases; new code should use Modified directly.
The header for each file in a ZIP archive has a flag bit indicating whether
the name and comment fields are encoded as UTF-8, as opposed to a system-specific default encoding.
In Go 1.8 and earlier, the Writer never set the UTF-8 bit.
In Go 1.9, the Writer changed to set the UTF-8 bit almost always.
This broke the creation of ZIP archives containing Shift-JIS file names.
In Go 1.10, the Writer now sets the UTF-8 bit only when
both the name and the comment field are valid UTF-8 and at least one is non-ASCII.
Because non-ASCII encodings very rarely look like valid UTF-8, the new
heuristic should be correct nearly all the time.
Setting a FileHeader's new NonUTF8 field to true
disables the heuristic entirely for that file.
The Writer also now supports setting the end-of-central-directory record's comment field,
by calling the Writer's new SetComment method.
The new Reader.Size
and Writer.Size
methods report the Reader or Writer's underlying buffer size.
The
Fields,
FieldsFunc,
Split,
and
SplitAfter
each already returned slices pointing into the same underlying array as its input.
Go 1.10 changes each of the returned subslices to have capacity equal to its length,
so that appending to a subslice will not overwrite adjacent data in the original input.
NewOFB now panics if given
an initialization vector of incorrect length, like the other constructors in the
package always have.
(Previously it returned a nil Stream implementation.)
The TLS server now advertises support for SHA-512 signatures when using TLS 1.2. The server already supported the signatures, but some clients would not select them unless explicitly advertised.
Leaf certificate validation now enforces the name constraints for all names contained in the certificate, not just the one name that a client has asked about. Extended key usage restrictions are similarly now checked all at once. As a result, after a certificate has been validated, now it can be trusted in its entirety. It is no longer necessary to revalidate the certificate for each additional name or key usage. TODO: Link to docs that may not exist yet.
Parsed certificates also now report URI names and IP, email, and URI constraints, using the new
Certificate fields
URIs, PermittedIPRanges, ExcludedIPRanges,
PermittedEmailAddresses, ExcludedEmailAddresses,
PermittedURIDomains, and ExcludedURIDomains.
The new MarshalPKCS1PublicKey
and ParsePKCS1PublicKey
functions convert an RSA public key to and from PKCS#1-encoded form.
The new MarshalPKCS8PrivateKey
function converts a private key to PKCS#8-encoded form.
(ParsePKCS8PrivateKey
has existed since Go 1.)
Name now implements a
String method that
formats the X.509 distinguished name in the standard RFC 2253 format.
Drivers that want to construct a sql.DB for
their clients can now implement the Connector interface
and call the new sql.OpenDB function,
instead of needing to encode all configuration into a string
passed to sql.Open.
Drivers that want to parse the configuration string only once per sql.DB
instead of once per sql.Conn,
or that want access to each sql.Conn's underlying context,
can make their Driver
implementations also implement DriverContext's
new OpenConnector method.
Drivers that implement ExecerContext
no longer need to implement Execer;
similarly, drivers that implement QueryerContext
no longer need to implement Queryer.
Previously, even if the context-based interfaces were implemented they were ignored
unless the non-context-based interfaces were also implemented.
To allow drivers to better isolate different clients using a cached driver connection in succession,
if a Conn implements the new
SessionResetter interface,
database/sql will now call ResetSession before
reusing the Conn for a new client.
This release adds 348 new relocation constants divided between the relocation types
R_386,
R_AARCH64,
R_ARM,
R_PPC64,
and
R_X86_64.
Go 1.10 adds support for reading relocations from Mach-O sections,
using the Section struct's new Relocs field
and the new Reloc,
RelocTypeARM,
RelocTypeARM64,
RelocTypeGeneric,
and
RelocTypeX86_64
types and associated constants.
Go 1.10 also adds support for the LC_RPATH load command,
represented by the types
RpathCmd and
Rpath,
and new named constants
for the various flag bits found in headers.
Marshal now correctly encodes
strings containing asterisks as type UTF8String instead of PrintableString,
unless the string is in a struct field with a tag forcing the use of PrintableString.
Marshal also now respects struct tags containing application directives.
The new MarshalWithParams
function marshals its argument as if the additional params were its associated
struct field tag.
Unmarshal now respects
struct field tags using the explicit and tag
directives.
Both Marshal and Unmarshal now support a new struct field tag
numeric, indicating an ASN.1 NumericString.
Reader now disallows the use of
nonsensical Comma and Comment settings,
such as NUL, carriage return, newline, invalid runes, and the Unicode replacement character,
or setting Comma and Comment equal to each other.
In the case of a syntax error in a CSV record that spans multiple input lines, Reader
now reports the line on which the record started in the ParseError's new StartLine field.
The new functions
NewEncoder
and
NewDecoder
provide streaming conversions to and from hexadecimal,
analogous to equivalent functions already in
encoding/base32
and
encoding/base64.
When the functions
Decode
and
DecodeString
encounter malformed input,
they now return the number of bytes already converted
along with the error.
Previously they always returned a count of 0 with any error.
The Decoder
adds a new method
DisallowUnknownFields
that causes it to report inputs with unknown JSON fields as a decoding error.
(The default behavior has always been to discard unknown fields.)
As a result of fixing a reflect bug,
Unmarshal
can no longer decode into fields inside
embedded pointers to unexported struct types,
because it cannot initialize the unexported embedded pointer
to point at fresh storage.
Unmarshal now returns an error in this case.
Encode
and
EncodeToMemory
no longer generate partial output when presented with a
block that is impossible to encode as PEM data.
The new function
NewTokenDecoder
is like
NewDecoder
but creates a decoder reading from a TokenReader
instead of an XML-formatted byte stream.
This is meant to enable the construction of XML stream transformers in client libraries.
The default
Usage function now prints
its first line of output to
CommandLine.Output()
instead of assuming os.Stderr,
so that the usage message is properly redirected for
clients using CommandLine.SetOutput.
PrintDefaults now
adds appropriate indentation after newlines in flag usage strings,
so that multi-line usage strings display nicely.
FlagSet adds new methods
ErrorHandling,
Name,
and
Output,
to retrieve the settings passed to
NewFlagSet
and
FlagSet.SetOutput.
To support the doc change described above,
functions returning slices of T, *T, **T, and so on
are now reported in T's Type's Funcs list,
instead of in the Package's Funcs list.
The For function now accepts a non-nil lookup argument.
The changes to the default formatting of Go source code discussed in the gofmt section above are implemented in the go/printer package and also affect the output of the higher-level go/format package.
Implementations of the Hash interface are now
encouraged to implement encoding.BinaryMarshaler
and encoding.BinaryUnmarshaler
to allow saving and recreating their internal state,
and all implementations in the standard library
(hash/crc32, crypto/sha256, and so on)
now implement those interfaces.
The new actions {{"{{break}}"}} and {{"{{continue}}"}}
break out of the innermost {{"{{range"}} ...}} loop,
like the corresponding Go statements.
The new Srcset content
type allows for proper handling of values within the
srcset
attribute of img tags.
Int now supports conversions to and from bases 2 through 62
in its SetString and Text methods.
(Previously it only allowed bases 2 through 36.)
The value of the constant MaxBase has been updated.
Int adds a new
CmpAbs method
that is like Cmp but
compares only the absolute values (not the signs) of its arguments.
Branch cuts and other boundary cases in
Asin,
Asinh,
Atan,
and
Sqrt
have been corrected to match the definitions used in the C99 standard.
The new Shuffle function and corresponding
Rand.Shuffle method
shuffle an input sequence.
The new functions
Round
and
RoundToEven
round their arguments to the nearest floating-point integer;
Round rounds a half-integer to its larger integer neighbor (away from zero)
while RoundToEven rounds a half-integer to its even integer neighbor.
The new functions
Erfinv
and
Erfcinv
compute the inverse error function and the
inverse complementary error function.
Reader
now accepts parts with empty filename attributes.
ParseMediaType now discards
invalid attribute values; previously it returned those values as empty strings.
The Conn and
Listener implementations
in this package now guarantee that when Close returns,
the underlying file descriptor has been closed.
(In earlier releases, if the Close stopped pending I/O
in other goroutines, the closing of the file descriptor could happen in one of those
goroutines shortly after Close returned.)
TCPListener and
UnixListener
now implement
syscall.Conn,
to allow setting options on the underlying file descriptor
using syscall.RawConn.Control.
The Conn implementations returned by Pipe
now support setting read and write deadlines.
The IPConn.ReadMsgIP,
IPConn.WriteMsgIP,
UDPConn.ReadMsgUDP,
and
UDPConn.WriteMsgUDP,
methods are now implemented on Windows.
On the client side, an HTTP proxy (most commonly configured by
ProxyFromEnvironment)
can now be specified as an https:// URL,
meaning that the client connects to the proxy over HTTPS before issuing a standard, proxied HTTP request.
(Previously, HTTP proxy URLs were required to begin with http:// or socks5://.)
On the server side, FileServer and its single-file equivalent ServeFile
now apply If-Range checks to HEAD requests.
FileServer also now reports directory read failures to the Server's ErrorLog.
The content-serving handlers also now omit the Content-Type header when serving zero-length content.
ResponseWriter's WriteHeader method now panics
if passed an invalid (non-3-digit) status code.
Redirect now sets the Content-Type header before writing its HTTP response.
ParseAddress and
ParseAddressList
now support a variety of obsolete address formats.
The Client adds a new
Noop method,
to test whether the server is still responding.
It also now defends against possible SMTP injection in the inputs
to the Hello
and Verify methods.
ReadMIMEHeader
now rejects any header that begins with a continuation (indented) header line.
Previously a header with an indented first line was treated as if the first line
were not indented.
ResolveReference
now preserves multiple leading slashes in the target URL.
Previously it rewrote multiple leading slashes to a single slash,
which resulted in the http.Client
following certain redirects incorrectly.
For example, this code's output has changed:
base, _ := url.Parse("http://host//path//to/page1")
target, _ := url.Parse("page2")
fmt.Println(base.ResolveReference(target))
Note the doubled slashes around path.
In Go 1.9 and earlier, the resolved URL was http://host/path//to/page2:
the doubled slash before path was incorrectly rewritten
to a single slash, while the doubled slash after path was
correctly preserved.
Go 1.10 preserves both doubled slashes, resolving to http://host//path//to/page2
as required by RFC 3986.
This change may break existing buggy programs that unintentionally
construct a base URL with a leading doubled slash in the path and inadvertently
depend on ResolveReference to correct that mistake.
For example, this can happen if code adds a host prefix
like http://host/ to a path like /my/api,
resulting in a URL with a doubled slash: http://host//my/api.
UserInfo's methods
now treat a nil receiver as equivalent to a pointer to a zero UserInfo.
Previously, they panicked.
File adds new methods
SetDeadline,
SetReadDeadline,
and
SetWriteDeadline
that allow setting I/O deadlines when the
underlying file descriptor supports non-blocking I/O operations.
The definition of these methods matches those in net.Conn.
If an I/O method fails due to missing a deadline, it will return a
timeout error; the
new IsTimeout function
reports whether an error represents a timeout.
Also matching net.Conn,
File's
Close method
now guarantee that when Close returns,
the underlying file descriptor has been closed.
(In earlier releases, like for net.Conn's,
if the Close stopped pending I/O
in other goroutines, the closing of the file descriptor could happen in one of those
goroutines shortly after Close returned.)
On BSD, macOS, and Solaris systems,
Chtimes
now supports setting file times with nanosecond precision
(assuming the underlying file system can represent them).
The Copy function now allows copying
from a string into a byte array or byte slice, to match the
built-in copy function.
In structs, embedded pointers to unexported struct types were
previously incorrectly reported with an empty PkgPath
in the corresponding StructField,
with the result that for those fields,
and Value.CanSet
incorrectly returned true and
and Value.Set
incorrectly succeeded.
The underlying metadata has been corrected;
for those fields,
CanSet now correctly returns false
and Set now correctly panics.
This may affect reflection-based unmarshalers
that could previously unmarshal into such fields
but no longer can.
For example, see the encoding/json notes.
As noted above, the blocking and mutex profiles now include symbol information so that they can be viewed without needing the binary that generated them.
ParseUint now returns
the maximum magnitude integer of the appropriate size
with any ErrRange error, as it was already documented to do.
Previously it returned 0 with ErrRange errors.
A new type
Builder is a replacement for
bytes.Buffer for the use case of
accumulating text into a string result.
The Builder's API is a restricted subset of bytes.Buffer's
that allows it to safely avoid making a duplicate copy of the data
during the String method.
On Windows,
the new SysProcAttr field Token,
of type Token allows the creation of a process that
runs as another user during StartProcess
(and therefore also during os.StartProcess and
exec.Cmd.Start).
The new function CreateProcessAsUser
gives access to the underlying system call.
On BSD, macOS, and Solaris systems, UtimesNano
is now implemented.
The new actions {{"{{break}}"}} and {{"{{continue}}"}}
break out of the innermost {{"{{range"}} ...}} loop,
like the corresponding Go statements.
LoadLocation now uses the directory
or uncompressed zip file named by the $ZONEINFO
environment variable before looking in the default system-specific list of
known installation locations or in $GOROOT/lib/time/zoneinfo.zip.
The new function LoadLocationFromTZData
allows conversion of IANA time zone file data to a Location.
The unicode package and associated
support throughout the system has been upgraded from version 9.0 to
Unicode 10.0,
which adds 8,518 new characters, including four new scripts, one new property,
a Bitcoin currency symbol, and 56 new emoji.