Also remove error case that can no longer happen and the related test.
Fixesgolang/go#31341
Change-Id: I534956f6e835dea4334b68d0ad0297cf93920af2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/173960
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Based on the work Paul Jolly did in https://go-review.googlesource.com/c/tools/+/173797
but not as internal tests and with a mildly obsessive attention to coverage.
Also has a failing test for golang/go#31341 that you can enable with -b31341
Change-Id: I528eee5304cd7191eafd3bcddb2f636c8722846f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/173978
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The "analyses" cache in lsp/cache.(*Package).GetActionGraph was not
getting cleared on errors. This could result in future calls to
GetActionGraph waiting on the "ready" channel indefinitely. This in
turn caused the goroutine in cacheAndDiagnose to block indefinitely
and never send the diagnostic results back.
Now we use a defer statement to always close the channel. If we did
not succeed, we also clear out the cache entry and set a "succeeded =
false" flag to signal waiters that they need to retry. If in the
future errors other than context.Canceled/Timeout are possible, this
retry behavior may need to be revisited.
Fixesgolang/go#30786
Change-Id: Icacc9188f1500b00f2178521ce373a2c1363f932
GitHub-Last-Rev: 7c43afd4286a69b0d35a625716e6934c72c4cef5
GitHub-Pull-Request: golang/tools#91
Reviewed-on: https://go-review.googlesource.com/c/tools/+/173977
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
This will allow us to surface these errors as diagnostics.
Change-Id: Ic8ad11ba43c08be6f391c0e2aa95015183461133
Reviewed-on: https://go-review.googlesource.com/c/tools/+/173780
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
*snippet.Builder helps you construct lsp completion snippet strings.
It handles escaping for you, and it gives a convenient interface for
writing nested placeholders.
Note that the builder does not support snippet "variables" or
associated features. They add a lot of complexity and don't seem very
useful at this point (plus they aren't supported in many editors).
Change-Id: I492ab2f6f0e08ed952154cbc0a17c86f32abf40a
GitHub-Last-Rev: 35a3f5d1cd0b6fda81b2c942a02aa1bd25c90acd
GitHub-Pull-Request: golang/tools#90
Reviewed-on: https://go-review.googlesource.com/c/tools/+/173661
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds support for completion of incomplete selectors after a
defer or go statement. We modify the AST before type-checking it with a
fake *ast.CallExpr.
Updates golang/go#29313
Change-Id: Ic9e8c9c49aa569cd7874791692c70a28c3146251
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172974
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Completion suppression in comments wasn't working for comments in
switch case statements, select case statements, and decl statements.
Rather than adding those to the list of leaf ast.Node types to look
for, we now always check if the position is in a comment. This fix
broke some completion tests that were using re"$" since "$" matches
after the comment "//" characters.
We now also don't complete within any literal values. Previously we
only excluded string literals.
Change-Id: If02f39f79fe2cd7417e39dbac2c6f84a484391ec
GitHub-Last-Rev: 7ab3f526b6752a8f74413dcd268382d359e1beba
GitHub-Pull-Request: golang/tools#88
Reviewed-on: https://go-review.googlesource.com/c/tools/+/173518
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
This change propagates more errors from analyses, instead of just saving
them in act.err, we actually return immediately. Ultimately, we'd want
to return to the previous behavior, but this will help us figure out
what's going wrong.
Updates golang/go#30786
Change-Id: I9d3288fd113c43775140e5c008e3e300b6d28c2a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/173497
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
When the value of a composite literal key/value pair was unparsable,
you were getting completions for the composite literal keys instead of
values. For example "struct { foo int }{foo: []<>" was completing to
the field name "foo". This was because the leaf ast.Node at the cursor
was the composite literal itself, and our go-back-one-character logic
was not happening because the preceding character's node
was *ast.BadExpr, not *ast.Ident. Fix by always generating the ast
path for the character before the cursor's position. I couldn't find
any cases where this broke completion.
I also added expected type detection for the following composite
literal cases:
- array/slice literals
- struct literals (both implicit and explicit field names)
- map keys and values
Fixesgolang/go#29153
Change-Id: If8cf678cbd743a970f52893fcf4a9b83ea06d7e9
GitHub-Last-Rev: f385705cc05eb98132e20561451dbb8c39b68519
GitHub-Pull-Request: golang/tools#86
Reviewed-on: https://go-review.googlesource.com/c/tools/+/173099
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Also convert the format tests to use it. This means that the build bots no
longer need to run gofmt.
Change-Id: I5cb9d239183b17d81fdb00b38e9099d224c07e6a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172973
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Modify the Report representation to be a list of Change values,
instead of two string slices.
This will enable adding more information to each change, like source
location.
Change-Id: Ia7389d7bc552479ea5e06efd7fdefe004058e66f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172777
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
This change adds detailed debug logging for lsp.Diagnostics. This is
necessary for further investigation of cases where diagnostics aren't
propagated after a "didChange" request.
Updates golang/go#30786
Change-Id: I30eabf5a1cb17d4538a8860310b450494626b76f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172971
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
`query` usage has the following duplicated description.
```
Usage: query [flags] query [flags] <mode> <mode args>
```
```
$ gopls query
query: query must be supplied a mode
answer queries about go source code
Usage: query [flags] query [flags] <mode> <mode args>
The mode argument determines the query to perform:
definition : show declaration of selected identifier
query flags are:
-emulate string
compatibility mode, causes gopls to emulate another tool.
values depend on the operation being performed
-json
emit output in JSON format
```
Change-Id: Ib511b6c77d8b6dc8148ca46f88a1a133d21ba25c
GitHub-Last-Rev: a022377913fec65482a26e61a2b22927de7d4132
GitHub-Pull-Request: golang/tools#85
Reviewed-on: https://go-review.googlesource.com/c/tools/+/173098
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change adds support for showing documentation when hovering over any
named type or function. For now, we show the entire comment associated
with the type; in future CLs, we should refine our approach and perhaps
only show the first line or sentence.
Updates golang/go#29151
Change-Id: Ib33284747b19acba67d79fb55c916574c3dd8073
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172958
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
When jumping to definition of an embedded struct pointer, be sure to
unwrap the pointer type so you properly jump to the pointee type.
Also, fix jumping to definition of an embedded struct inside an
anonymous struct inside a struct. The embedded struct detection was
continuing too far and thinking it wasn't an embedded struct when it
saw the anonymous struct.
Fixesgolang/go#31451
Change-Id: I96017764270712a2ae02a85306605495075d12e7
GitHub-Last-Rev: 9997f60855ebe37bcca2fecc1ba2a7b871f393d4
GitHub-Pull-Request: golang/tools#83
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172583
Run-TryBot: Paul Jolly <paul@myitcv.org.uk>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change will at least stop the panic from occurring.
Updates golang/go#31341
Change-Id: I6b06941cfb6c020d2b37813573cb0dc068d54e65
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172667
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change associates an ast.Node for some object declarations.
In this case, we only handle type declarations, but future changes will
support other objects as well. This is the first step in adding
documentation on hover.
Updates golang/go#29151
Change-Id: I39ddccf4130ee3b106725286375cd74bc51bcd38
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172661
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Add an additional check to handle URI comparisons. This fixes Hover on
Windows.
Change-Id: Ibfc816f1ec374144377a873c5b52867fafa3d7e8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172659
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Needed in order to sort lists of spans for stable tests, also used for span
equality tests.
Change-Id: Id2bedff4d7136494e2302c02bcb9bdc662ccfeb1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172660
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change separates the different behaviors of server.go by the
categories defined in the spec. This allows us to differentiate more
easily between the language features and the text synchronization code.
I also renamed the "Symbols" function to "Symbol", which fits with the
specification
(https://microsoft.github.io/language-server-protocol/specification#workspace_symbol),
and makes clearer the distinction between DocumentSymbols and Symbol.
Change-Id: I926b8a772c478f6ae426352fb12dc4403f0e736a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172637
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
- show signature for function calls whose function expression is not
an object (e.g. the second call in foo()()). since the function name
is not available, we use the generic "func"
- only provide signature help when the position is on or within the
call expression parens. this is consistent with the one other lsp
server i tried (java). this improves the gopls experience in emacs
where lsp-mode is constantly calling "hover" and
"signatureHelp" ("hover" should be preferred unless you are inside
the function params list)
- use the entire signature type string as the label since that includes
the return values, which are useful to see
- don't qualify the function name with its package. it looks funny to
see "bytes.Cap()" as the help when you are in a call
to (*bytes.Buffer).Cap(). it could be useful to include invocant
type info, but leave it out for now since signature help is meant to
focus on the function parameters.
- don't turn variadic args "foo ...int" into "foo []int" for the
parameter information (i.e. maintain it as "foo ...int")
- when determining active parameter, count the space before a
parameter name as being part of that parameter (e.g. the space
before "b" in "func(a int, b int)")
- handle variadic params when determining the active param (i.e.
highlight "foo(a int, *b ...string*)" on signature help for final
param in `foo(123, "a", "b", "c")`
- don't generate an extra space in formatParams() for unnamed
arguments
I also tweaked the signatureHelp server log message to include the
error message itself, and populated the server's logger in lsp_test.go
to aid in development.
Fixesgolang/go#31448
Change-Id: Iefe0e1e3c531d17197c0fa997b949174475a276c
GitHub-Last-Rev: 5c0b8ebd87a8c05d5d8f519ea096f94e89c77e2c
GitHub-Pull-Request: golang/tools#82
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172439
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Also change the enum values to match the prior string conversion routine.
Change-Id: I23ac6a72c8e116c5ee05e9324356481e519781e9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172410
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds support in go/packages for defining an entire package
in an overlay. We also add corresponding tests for this in gopls, to
confirm that it works as expected.
Fixesgolang/go#31467
Change-Id: Iead203ab2964a7ac4f571be97624b725ac5de7e0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172409
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
this makes them less fragile, more portable and also more understandable.
Change-Id: Ife8a7ed76b7517eaae37bd3896fee87740ffb22a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172405
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We now set the diagnostic source in the diagnostics call rather than when
converting it to the LSP protocol.
Change-Id: Ic762aaab1b2bf93b75c4c3d78aa84e2f918398fc
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172408
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
this make the same kinds of changes I already made to the symbol tests,
to make the messages more detailed and remove the goto
Change-Id: I7cb27839b2ab696ad4e3d6537d91152e34fb1d89
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172477
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
remove the goto and make it print more information about why the failed.
Change-Id: I2f5f3c7fe88eae6fe5de61c5d9b401797b6933b2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172404
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This is to help with debugging, and to allow us to write tests that do not
rely on hard coded constants.
Change-Id: Ica9ed5eee3d35539fe50d76276988852e62b81ca
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172401
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds the ability to organize all imports as quickfix on a
diagnostic, in addition to the standard "source.organizeImports" code
action kind. This change still requires a bit of work, since really, we
should only add one import per diagnostic and each edit should be the
edits necessary for the addition or removal of the individual import,
but this is a good start.
Change-Id: I57679446bec833d215c35533240102fb61c86f20
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172397
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This will allow us to better track the errors that might cause golang/go#30786.
Change-Id: I310ad0fd0eda3102d5763e28fc383a4994ef0ff3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/172280
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This allows us to use the diff.ApplyEdits in tests, saving us from a different
implementation.
It also prepares for command lines that need to use diff features based on the
results of a protocol message.
Splitting content into lines is too easy to get wrong, and needs to be done
correctly or the diff results make no sense. This adds the SplitLines function
to the diff pacakge to do it right and then uses it everwhere we we already
doing it wrong.
It also makes all the diff tests external black box tests.
Change-Id: I698227d5769a2bfbfd22a64ea42906b1df9268d9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/171027
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This adds unified diff handling to the diff package.
It also adds a lot more testing and also verifies the unified
diff tests against the diff program if you run the tests with
the flag -verify-diff
This functionality is needed for some of the command verbs.
Change-Id: I817438fd25c0b16f3f31578f51a886944e74a948
Reviewed-on: https://go-review.googlesource.com/c/tools/+/171024
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Make methods children of their receiver's type symbol.
Add struct fields as children of the struct's type symbol.
Also identify numeric, boolean, and string types.
Updates golang/go#30915Fixesgolang/go#31202
Change-Id: I33c4ea7b953e981ea1e858505b77c7a3ba6ee399
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170198
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change makes sure that we never return error messages for
completions and signature help requests - just empty results.
Change-Id: I00d75cd116daab63beb07f2344e47aac01bb64ee
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170958
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
go.ts, the program that generates Go types for the LSP protocol, now
handles Typescript type merging for ClientCapabilites, so fields are no
longer missing. Also, to silence go lint and go vet there are changes
in the comments generated in tsprotocol.go. All the *structs were changed
to structs in ClientCapabilities as it was absurdly complex to write literals
of the type. Finally, several otherwise unused types are no longer
generated.
Change-Id: If414a32bc4d733adb2cf8befda9d8a0703c568a6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/171026
Run-TryBot: Peter Weinberger <pjw@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change will stop formatting from working on any file that does not
parse. This is a temporary fix to handle the formatting problems
mentioned here: https://github.com/Microsoft/vscode-go/issues/2410, but
is not a long-term solution.
Change-Id: Ie34b1876519832d6859db95fdcad7cc37a20b769
Reviewed-on: https://go-review.googlesource.com/c/tools/+/171019
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change makes codeActions look at the diagnostics provided before
responding. Specifically, before running "source.organizeImports", we
check if there is a diagnostic relating to imports.
Change-Id: I5268d5e8f144c4f2e085b2a861d0abfb7614323b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170997
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This also means we don't need the J2 becasue it is implied by len(Content)
Change-Id: I04e2cbaa3e1faa1e3add22ec2d478821b9062419
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170878
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
instead of driving the source pacakge directly, it indirects through the lsp
protocol (the same way check does)
We are normalizing on all the command lines doing this, so that server mode
is more viable in the future.
Change-Id: Ib5f2a059a44a5c60a53129c554e3cc14ca72c4a8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170577
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change allows us to determine if we should complete with
placeholders in the function signature or not.
We currently complete all functions with parameters with a set of
parentheses with the cursor between them. Now, we support the option to
tab through the parameters.
Change-Id: I01d9d7ffdc76eb2f8e009ab9c8aa46d71c24c358
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170877
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
We now match only the things we realy need to, to allow the description to vary more.
Change-Id: Ib3591c41ed5a5c725f2a3efb180ba17f808de51a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170341
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This uses the workspace folders to build multiple views, and then tries to pick
the right view to send each incomming request to.
Change-Id: I0cc896dbbc67eb0a88225ddeca6c518f4258bbba
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170179
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds a cache of undelivered diagnostics on the server-side.
If we fail to send a diagnostic once, we will retry the next time that
the server sends diagnostics.
Change-Id: I161dfad8ea1d2cfdcee933baed2d6872dc03b0c0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/167737
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
now there are no more race conditions in the jsonrpc or server code make
connected pipe (rather than direct API) the default in the tests to make
sure we stay clean.
Change-Id: Id1ffede795a660dbf7b265b9e0419c60cf83c6e8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170181
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Also use it for errors that were otherwise silently dropped
This makes it much easier to debug problems.
Also added command line control over whether the rpc trace messages are printed, which allows you to read the
log, otherwise the file edit messages swamp the log.
Change-Id: I7b70fd18034a87b2964e6d6d5f6f33dcaf7d8ea8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170178
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change also fixes the corresponding code in go/packages, which was
actually not filling in the TypesSizes if the bit was set.
Change-Id: I2d5a849045768a81c94218eb41da2faec26189a3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170010
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change allows us to return diagnostics in the case of a file that
doesn't exist.
Change-Id: I6275c0dc9103a3f44070919937afe27c64545828
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170009
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Now the jsonrpc2 library allows you to call outgoing methods within a handler
we can clean up some stuff and also have it work correctly in more cases.
Change-Id: I8633069816d92f7cc16842431775efb1a98a506a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170008
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The means that the stream reader can move forward while a message is being processed.
This will significantly improve responsivness and cancellation handling, and also
allow message handlers to send messages themselves, reducing the need to spin up
new go routines inside handlers.
The flow control changes from blocking to failing when a server is busy, which removes
the main current cause of deadlock, but may break non deadlock cases that currently wait
if the queue is not sufficiently large.
Change-Id: Ia73eb049b38d0651344abdbf16c477a8ce1a6fd1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170007
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This changes the basic API of a jsonrpc2 connection to run the
read loop as a method rather than in a go routine launched in
the NewConn. This allows the handler to be created and bound
between construction and the read loop starting, which fixes
the race.
Fixesgolang/go#30091
Change-Id: I8201175affe431819cf473e5194d70c019f58425
Reviewed-on: https://go-review.googlesource.com/c/tools/+/170003
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
With this change (finally, after a lot of detours) if you run the lsp tests with `-race -pipe` then you
can reliably reproduce the race in golang/go#30091
Change-Id: Ibd9fda5e07409a15d1bc8d14cb46fde41155aa6e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/169999
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This connects up the configuration message, and uses it to allow the client to set the environment
in the config passed to packages.Load
Change-Id: I75e03c01c74e9b11c8b4c47b9cbdd0574cddf778
Reviewed-on: https://go-review.googlesource.com/c/tools/+/169704
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Instead of using a simple path map we now attempt to match files with
os.SameFile with fast paths for exact path matches. This should fix issues both
with symlinked directories (the mac tmp folder) and with case sensitivity
(windows)
Change-Id: I014dd01f89d08a348e7de7697cbc3a2512a6e5b3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/169699
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This is the first step of fixing gopls on Windows.
Change-Id: I20cea63051f448cba86996edaf7a8347b0d20bd1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/169444
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Ian Cottrell <iancottrell@google.com>
go/token.File.Offset panics on invalid positions, which is causing
crashes on invalid ASTs.
Change-Id: I6c698760ae92f3076a056c3560bea2e8eeb528db
Reviewed-on: https://go-review.googlesource.com/c/tools/+/169443
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change uses go/types information to get the types for the
different symbols. It also groups the symbols according to their kinds,
though this doesn't seem to be reflected in the actual VSCode UI...
Updates golang/go#30915
Change-Id: I2caefe01f9834aaad6b9e81cd391d461405ef725
Reviewed-on: https://go-review.googlesource.com/c/tools/+/169438
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This upgrades the current gopls query definition tests to use the main testdata
folder. This considerably increases the coverage and also sets us up to better
test the other command line features as we add them.
Change-Id: If722f3f6d0270104000f1451d20851daf0757874
Reviewed-on: https://go-review.googlesource.com/c/tools/+/169159
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The test fails if the GOROOT directory contains a dash, e.g. as in
/usr/lib/google-golang on corporate workstations, or on certain
builders.
Change-Id: If08c438764f4b76fff7fb43ccf3e4fd56afeff1a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/168063
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Change span to hide its fields and have validating accessors
This catches the cases where either the offset or the position is being used
when it was not set.
It also normalizes the forms as the API now controls them, and allows us to
simplify some of the logic.
The converters are now allowed to return an error, which lets us cleanly
propagate bad cases.
The lsp was then converted to the new format, and also had some error checking
of its own added on the top.
All this allowed me to find and fix a few issues, most notably a case where the
wrong column mapper was being used during the conversion of definition results.
Change-Id: Iebdf8901e8269b28aaef60caf76574baa25c46d4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/167858
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This CL ensures that a "." inside a string literal will return an empty
completion list.
Fixesgolang/go#30477
Change-Id: I1442d0acab4c12a829047805f745c4729d69c208
Reviewed-on: https://go-review.googlesource.com/c/tools/+/167857
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
This change brings back handling for circular imports, which was removed
because I originally thought that go/packages would handle that.
However, since we are type-checking from source, we still end up having
to deal with that.
Additionally, we propagate the errors of type-checking to the
diagnostics so that the user can actually see some of the problems.
Change-Id: I0139bcaae461f1bcaf95706532bc5026f2430101
Reviewed-on: https://go-review.googlesource.com/c/tools/+/166882
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
The language client must support the preselect feature, so as of right
now, I don't think that this change has any effect. However, ultimately,
we should preselect the first completion item we suggest, as we rank
items.
Change-Id: I977cce26157504595a0193ab551685e21a3df155
Reviewed-on: https://go-review.googlesource.com/c/tools/+/167466
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
An ignored error in toProtocolDiagnostics could result in empty
diagnostics being (incorrectly) sent to the user.
Change-Id: I34c86a1f5bbf28888bedad094f596cc27a52b86d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/167714
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
We may encounter these nil pointer if go/packages cannot find the
package of the given file, for example, when the user creates a new file
or a new package.
Change-Id: I16993017243a56332dd9f7e0aaf3c1d57f20fc3a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/167462
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
A span with column 0 is intended to mean the start of the line, which in utf16
mode must be the 1st character
Change-Id: I4b98fe86528b889bbfe4b5ed3ae79c4da81017b1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/167459
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
InsertText is deprecated, and it seems that providing both InsertText
and TextEdits causes unexpected behavior from VSCode. Avoid this by
providing only TextEdits.
Fixesgolang/go#30796
Change-Id: Ieb5ad2fecd6f7083a4c1bc402634893c7e6ff49f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/167457
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change adds a Package interface to the source package, which allows
us to reduce the information cached per-package (we don't use any of the
unnecessary fields in a *go/packages.Package).
This change also adds an analysis cache for each package, which is used
to cache the results of analyses to avoid recomputation.
Change-Id: I56c6b5ed51126c27f46731c87ac4eeacc63cb81a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/165750
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
The existing code implementing the jsonrpc LSP (language server protocol)
relies on hand-translated definitions for the needed Go data types.
Unfortunately Microsoft makes changes, not always backwards
compatibly. This code generates the Go data types directly from the
Typescript source.
Adapting gopls to the new data definitions will happen in a future CL.
Change-Id: I032c69a16b6f2614370765dcd6dbdb38e9f40ab6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/166277
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Gopls presently uses hand-coded data types (in internal/lsp/protocol)
for communicating with LSP clients. Instead, modify it to use the
automatically generated file (internal/lsp/protocol/tsprotocol.go).
Replaced files have been put (temporarily) in a directory 'preserve'
so readers can compare the old data types with the new ones.
Change-Id: Idfa53a5783e2d6a47e03b20641dd76fbc2c32677
Reviewed-on: https://go-review.googlesource.com/c/tools/+/166757
Run-TryBot: Peter Weinberger <pjw@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds an additional cache for type information, which here is
just a *packages.Package for each package. The metadata cache maintains
the import graph, which allows us to easily determine when a package X
(and therefore any other package that imports X) should be invalidated.
Additionally, rather than performing content changes as they happen, we
queue up content changes and apply them the next time that any type
information is requested.
Updates golang/go#30309
Change-Id: Iaf569f641f84ce69b0c0d5bdabbaa85635eeb8bf
Reviewed-on: https://go-review.googlesource.com/c/tools/+/165438
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This implements a standard way of describing source locations along with
printing and parsing of those locations and conversion to and from the token.Pos
forms.
Change-Id: Ibb3df0a282bc2effb0fa8bd3a51bb0d281b2ffb1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/163778
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Instead of calling packages.Load on every character change, we reparse
the import declarations of the file and determine if they have
changed. We also introduce a metadata cache that caches the import
graph. This is used in type-checking and only updated on calls to
packages.Load.
Change-Id: I7cb384aba77ef3c1565d3b0db58e6c754d5fed15
Reviewed-on: https://go-review.googlesource.com/c/tools/+/165137
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Separate out functions to make the code more readable.
Change-Id: I4c48a8343ba5666de375c43499420bdf244aafd1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/165022
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
It is difficult to debug gopls in combination with the incremental
changes feature. Because gopls is slow (caching CL is in progress), it
seems like the incremental changes can sometimes produce strange
behavior. Disable it for now until we can prioritize work on it.
Change-Id: I931aa39756f198d1af21dca359acc83ca3392c4c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/165023
Reviewed-by: Michael Matloob <matloob@golang.org>
Also, separate type-checking logic into its own file.
go/packages returns import cycle errors anyway, so we just return them instead.
Change-Id: I1f524cdf81e1f9655c1b0afd50dd2aeaa167bb2f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/165021
Reviewed-by: Michael Matloob <matloob@golang.org>
This change adds severity levels to source.Diagnostics, allowing us to
pass this information along to the LSP. This allows compiler errors to
show up in red, while vet results show up in green.
Change-Id: I2bc0b27ed6629f987c05affe00fdbe4b9bfb3b3e
Reviewed-on: https://go-review.googlesource.com/c/164299
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Because diagnostics computations happen in parallel, we were getting
concurrent map writes by keeping one cache.
Change-Id: Ifa5adffe14c509168c9f8c5cb012f3fcd3a32441
Reviewed-on: https://go-review.googlesource.com/c/163161
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
These packages existed only to power cmd/godoc for the purpose of
serving the golang.org website. That functionality has moved into
x/website as part of golang/go#29206. x/website has become the
canonical source of golang.org in CL 162157, the golang.org-serving
code was removed from cmd/godoc in CL 162400, and these packages can
be deleted too now.
This removes the last dependency on the cloud.google.com/go module,
which results in a significant reduction of the number of indirect
dependencies in x/tools (this is due to issue golang/go#29935, which
affects the current version of the cloud.google.com/go module).
Run go mod tidy (using Go 1.12 RC 1).
Updates golang/go#29206
Updates golang/go#29981
Change-Id: If07e3ccae8538b3ebd51af64b6af5be5463f4906
Reviewed-on: https://go-review.googlesource.com/c/162401
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Channing Kimble-Brown <channing@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Make sure to use the import path in the packages cache, rather than the
package path. Also, prefetch dependencies.
Change-Id: I0de3942346aa6755dbe904f973aca51d26ba0306
Reviewed-on: https://go-review.googlesource.com/c/162577
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Like the previous change to the FIle interface, we treat Read as if it were an
accessor, we remember the content part but not the error part, and we may fill
it in asynchronously, so this change makes it explicit.
In the future we should probably trap the error in the read and push it back
through another channel though, it will be the root cause of later errors.
Change-Id: I3d374dd557178b4e8c5544813cd77f5c0faefe5b
Reviewed-on: https://go-review.googlesource.com/c/162403
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The ExecuteCommandParams field is optional, so it can be set to nil.
Change-Id: If440257e6b64ce5189b0a4b39a6ed7fc867da5af
Reviewed-on: https://go-review.googlesource.com/c/162402
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
we don't really use them, only generate them in cases where the failure is way more fundamental, and then also fail
to remember them for the next call to the same accessor. Better to not have them.
Change-Id: I0e8abeda688f5cc2a932ed95a80d89225c399f93
Reviewed-on: https://go-review.googlesource.com/c/162399
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Added this check in golang.org/cl/161077 and unintentionally removed it in
golang.org/cl/161497.
Change-Id: I66bd2b616f4b41c25f134f6e9457c97bbcd3f72b
Reviewed-on: https://go-review.googlesource.com/c/162398
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Small changes to handle the last line in the diff library, LSP tests,
and diff to text edits conversion.
Fixesgolang/go#30137
Change-Id: Iff0e53a04c2dabf6f54eb7c738b4c0837f16efba
Reviewed-on: https://go-review.googlesource.com/c/162217
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This change adds a copy of the parseFiles function from go/packages for
file parsing. Also fix crash caused by lack of TypeSizes from
go/packages.Load when using LoadImports mode.
Change-Id: Ie8c3c653679ab81da45905c6839de7e63966d84c
Reviewed-on: https://go-review.googlesource.com/c/161670
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This changes the analysis code from that which was in unitchecker.go
to that in checker.go, so we can run actions that get facts for dependencies
concurrently.
Adds the rest of the traditional vet suite to the LSP.
TODO(matloob): test that facts are actually propagated between packages
Change-Id: I946082159777943af81bcf10e503fecc99da521e
Reviewed-on: https://go-review.googlesource.com/c/161671
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Also adding in --remote support and using it to implement the equivalent
functionality of the external forward command
Also adding in --listen as a replacement for --port as it is more flexible,
specifically it allows localhost:port which
is helpful in environments where opening remotely accesible ports is
problematic.
Change-Id: I5de1cea7dd6f1ee46e7423f3be2a4caca6f040b2
Reviewed-on: https://go-review.googlesource.com/c/161658
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Get dummy sizes values until we can get go/packages to forward the correct
values.
Change-Id: Ie31333e9ed7c57d02e1447097567fa894ea9de7d
Reviewed-on: https://go-review.googlesource.com/c/161937
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change moves gopls from type-checking packages using the
go/packages API to type-checking from source. This is the first step in
adding caching to gopls.
Change-Id: I2a7dcfd8c9c0bfc6c35c86eadcdc6f9ce53d9be7
Reviewed-on: https://go-review.googlesource.com/c/161497
Reviewed-by: Ian Cottrell <iancottrell@google.com>
