Now we no longer need to mess with TLS on Darwin 386/amd64, we always
rely on the pthread library to set it up. We now just use one entry
in the TLS for the G.
Return from mstart to let the pthread library clean up the OS thread.
Change-Id: Iccf58049d545515d9b1d090b161f420e40ffd244
Reviewed-on: https://go-review.googlesource.com/110215
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently, there is no check for a negative modulus in ModInverse.
Negative moduli are passed internally to GCD, which returns 0 for
negative arguments. Mod is symmetric with respect to negative moduli,
so the calculation can be done by just negating the modulus before
passing the arguments to GCD.
Fixes#24949
Change-Id: Ifd1e64c9b2343f0489c04ab65504e73a623378c7
Reviewed-on: https://go-review.googlesource.com/108115
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Currently, the behavior of z.ModInverse(g, n) is undefined
when g and n are not relatively prime. In that case, no
ModInverse exists which can be easily checked during the
computation of the ModInverse. Because the ModInverse does
not indicate whether the inverse exists, there are reimplementations
of a "checked" ModInverse in crypto/rsa. This change removes the
undefined behavior. If the ModInverse does not exist, the receiver z
is unchanged and the return value is nil. This matches the behavior of
ModSqrt for the case where the square root does not exist.
name old time/op new time/op delta
ModInverse-4 2.40µs ± 4% 2.22µs ± 0% -7.74% (p=0.016 n=5+4)
name old alloc/op new alloc/op delta
ModInverse-4 1.36kB ± 0% 1.17kB ± 0% -14.12% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
ModInverse-4 10.0 ± 0% 9.0 ± 0% -10.00% (p=0.008 n=5+5)
Fixes#24922
Change-Id: If7f9d491858450bdb00f1e317152f02493c9c8a8
Reviewed-on: https://go-review.googlesource.com/108996
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
CL 93658 moved stack trace printing inside a systemstack call to
sidestep complexity in case the runtime is in a inconsistent state.
Unfortunately, debuggers generating backtraces for a Go panic
will be confused and come up with a technical correct but useless
stack. This CL moves just the crash performing - typically a SIGABRT
signal - outside the systemstack call to improve backtraces.
Unfortunately, the crash function now needs to be marked nosplit and
that triggers the no split stackoverflow check. To work around that,
split fatalpanic in two: fatalthrow for runtime.throw and fatalpanic for
runtime.gopanic. Only Go panics really needs crashes on the right stack
and there is enough stack for gopanic.
Example program:
package main
import "runtime/debug"
func main() {
debug.SetTraceback("crash")
crash()
}
func crash() {
panic("panic!")
}
Before:
(lldb) bt
* thread #1, name = 'simple', stop reason = signal SIGABRT
* frame #0: 0x000000000044ffe4 simple`runtime.raise at <autogenerated>:1
frame #1: 0x0000000000438cfb simple`runtime.dieFromSignal(sig=<unavailable>) at signal_unix.go:424
frame #2: 0x0000000000438ec9 simple`runtime.crash at signal_unix.go:525
frame #3: 0x00000000004268f5 simple`runtime.dopanic_m(gp=<unavailable>, pc=<unavailable>, sp=<unavailable>) at panic.go:758
frame #4: 0x000000000044bead simple`runtime.fatalpanic.func1 at panic.go:657
frame #5: 0x000000000044d066 simple`runtime.systemstack at <autogenerated>:1
frame #6: 0x000000000042a980 simple at proc.go:1094
frame #7: 0x0000000000438ec9 simple`runtime.crash at signal_unix.go:525
frame #8: 0x00000000004268f5 simple`runtime.dopanic_m(gp=<unavailable>, pc=<unavailable>, sp=<unavailable>) at panic.go:758
frame #9: 0x000000000044bead simple`runtime.fatalpanic.func1 at panic.go:657
frame #10: 0x000000000044d066 simple`runtime.systemstack at <autogenerated>:1
frame #11: 0x000000000042a980 simple at proc.go:1094
frame #12: 0x00000000004268f5 simple`runtime.dopanic_m(gp=<unavailable>, pc=<unavailable>, sp=<unavailable>) at panic.go:758
frame #13: 0x000000000044bead simple`runtime.fatalpanic.func1 at panic.go:657
frame #14: 0x000000000044d066 simple`runtime.systemstack at <autogenerated>:1
frame #15: 0x000000000042a980 simple at proc.go:1094
frame #16: 0x000000000044bead simple`runtime.fatalpanic.func1 at panic.go:657
frame #17: 0x000000000044d066 simple`runtime.systemstack at <autogenerated>:1
After:
(lldb) bt
* thread #7, stop reason = signal SIGABRT
* frame #0: 0x0000000000450024 simple`runtime.raise at <autogenerated>:1
frame #1: 0x0000000000438d1b simple`runtime.dieFromSignal(sig=<unavailable>) at signal_unix.go:424
frame #2: 0x0000000000438ee9 simple`runtime.crash at signal_unix.go:525
frame #3: 0x00000000004264e3 simple`runtime.fatalpanic(msgs=<unavailable>) at panic.go:664
frame #4: 0x0000000000425f1b simple`runtime.gopanic(e=<unavailable>) at panic.go:537
frame #5: 0x0000000000470c62 simple`main.crash at simple.go:11
frame #6: 0x0000000000470c00 simple`main.main at simple.go:6
frame #7: 0x0000000000427be7 simple`runtime.main at proc.go:198
frame #8: 0x000000000044ef91 simple`runtime.goexit at <autogenerated>:1
Updates #22716
Change-Id: Ib5fa35c13662c1dac2f1eac8b59c4a5824b98d92
Reviewed-on: https://go-review.googlesource.com/110065
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
The general policy for the current state of js/wasm is that it only
has to support tests that are also supported by nacl.
The test nilptr3.go makes assumptions about which nil checks can be
removed. Since WebAssembly does not signal on reading a null pointer,
all nil checks have to be explicit.
Updates #18892
Change-Id: I06a687860b8d22ae26b1c391499c0f5183e4c485
Reviewed-on: https://go-review.googlesource.com/110096
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When deciding whether to flush the constant pool, the distance check
in checkpool can fail to account for padding inserted before the next
instruction by nacl.
For example, see this failure:
https://go-review.googlesource.com/c/go/+/109350/2#message-07085b591227824bb1d646a7192cbfa7e0b97066
Here, the pool should be flushed before a CALL instruction, but
checkpool only considers the CALL instruction to be 4 bytes and
doesn't account for the 8 extra bytes of alignment padding added
before it by asmoutnacl. As a result, it flushes the pool after the
CALL instruction, which is 4 bytes too late.
Furthermore, there's no explanation for the rather convoluted
expression used to decide if we need to emit the constant pool.
This CL modifies checkpool to take the PC following the tentative
instruction as an argument. The caller knows this already and this way
checkpool doesn't have to guess (and get it wrong in the presence of
padding). In the process, it rewrites the test to be structured and
commented.
Change-Id: I32a3d50ffb5a94d42be943e9bcd49036c7e9b95c
Reviewed-on: https://go-review.googlesource.com/110017
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This commit only moves code in preparation for the following commit
which adds the js/wasm architecture to the os package. There are no
semantic changes in this commit.
Updates #18892
Change-Id: Ia44484216f905c25395c565c34cfe6996c305ed6
Reviewed-on: https://go-review.googlesource.com/109976
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It's also fewer system calls. Fall back to longer read
only if it seems like the Uname result is truncated.
Fixes#24701
Change-Id: Ib6550acede8dddaf184e8fa9de36377e17bbddab
Reviewed-on: https://go-review.googlesource.com/110295
Reviewed-by: Ian Lance Taylor <iant@golang.org>
I was confused about how to start an HTTP server if the server
cert/key are in memory, not on disk. I thought it would be good to
show an example of how to use these two functions to accomplish that.
example-cert.pem and example-key.pem were generated using
crypto/tls/generate_cert.go.
Change-Id: I850e1282fb1c38aff8bd9aeb51988d21fe307584
Reviewed-on: https://go-review.googlesource.com/72252
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Even though GOARCH=riscv64 is not supported by gc yet, it is easy
to make cmd/cgo already support it.
Together with the changes in debug/elf in CL 107339 this e.g. allows
to generate Go type definitions for linux/riscv64 in the
golang.org/x/sys/unix package without using gccgo.
Change-Id: I6b849df2ddac56c8c483eb03d56009669ca36973
Reviewed-on: https://go-review.googlesource.com/110066
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The iOS exec wrapper uses ios-deploy to set up a device, install
the wrapped app, and start a lldb session to run it. ios-deploy is
not built to be scripted, as can be seen from the brittle way it is
driven by the Go wrapper. There are many timeouts and comments such
as
"
// lldb tries to be clever with terminals.
// So we wrap it in script(1) and be clever
// right back at it.
"
This CL replaces the use of ios-deploy with a lldb driver script in
Python. lldb is designed to be scripted, so apart from getting rid
of the ios-deploy dependency, we gain:
- No timouts and scripting ios-deploy through stdin and parsing
stdout for responses.
- Accurate exit codes.
- Prompt exits when the wrapped binary fails for some reason. Before,
the go test timeout would kick in to fail the test.
- Support for environment variables.
- No noise in the test output. Only the test binary output is output
from the wrapper.
We have to do more work with the lldb driver: mounting the developer
image on the device, running idevicedebugserverproxy and installing
the app. Even so, the CL removes almost as many lines as it adds.
Furthermore, having the steps split up helps to tell setup errors
from runtime errors.
Change-Id: I48cccc32f475d17987283b2c93aacc3da18fe339
Reviewed-on: https://go-review.googlesource.com/107337
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Missed conversion of newosproc for the parts of darwin that
weren't affected by my previous change.
Update #25181
Change-Id: I81a2935e192b6d0df358c59b7e785eb03c504c23
Reviewed-on: https://go-review.googlesource.com/110123
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
In the binary sizes FAQ, the approximate size of a Go hello world
binary was said to be 1.5MB (it was about 1.6MB on go1.7 on
linux/amd64). Sadly, this is no longer true. A Go1.10 hello world is
2.0MB, and in 1.11 it'll be about 2.5MB.
Just say "a couple megabytes" to stop this dance.
Change-Id: Ib4dc13a47ccd51327c1a9d90d4116f79597513a4
Reviewed-on: https://go-review.googlesource.com/110069
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Some of the comments relative paths do not exist and
reflect does not define its own hmap structure.
Correct paths and consistently reference paths starting from the
go src directory.
Change-Id: I5204a3a98f77d65f17dcde98b847378cea05ad8a
Reviewed-on: https://go-review.googlesource.com/94758
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Replace thread creation with calls to the pthread
library in libc.
Update #17490
Change-Id: I1e19965c45255deb849b059231252fc6a7861d6c
Reviewed-on: https://go-review.googlesource.com/108679
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
and assign the same colors for spans belong to the tasks
(sadly, the trace viewer will change the saturation/ligthness
for asynchronous slices so exact color mapping is impossible.
But I hope they are not too far from each other)
Change-Id: Idaaf0828a1e0dac8012d336dcefa1c6572ddca2e
Reviewed-on: https://go-review.googlesource.com/109338
Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Change the help doc of
go tool compile -d=ssa/help
from this:
compile: GcFlag -d=ssa/<phase>/<flag>[=<value>|<function_name>]
<phase> is one of:
check, all, build, intrinsics, early_phielim, early_copyelim
early_deadcode, short_circuit, decompose_user, opt, zero_arg_cse
opt_deadcode, generic_cse, phiopt, nilcheckelim, prove, loopbce
decompose_builtin, softfloat, late_opt, generic_deadcode, check_bce
fuse, dse, writebarrier, insert_resched_checks, tighten, lower
lowered_cse, elim_unread_autos, lowered_deadcode, checkLower
late_phielim, late_copyelim, phi_tighten, late_deadcode, critical
likelyadjust, layout, schedule, late_nilcheck, flagalloc, regalloc
loop_rotate, stackframe, trim
<flag> is one of on, off, debug, mem, time, test, stats, dump
<value> defaults to 1
<function_name> is required for "dump", specifies name of function to dump after <phase>
Except for dump, output is directed to standard out; dump appears in a file.
Phase "all" supports flags "time", "mem", and "dump".
Phases "intrinsics" supports flags "on", "off", and "debug".
Interpretation of the "debug" value depends on the phase.
Dump files are named <phase>__<function_name>_<seq>.dump.
To this:
compile: PhaseOptions usage:
go tool compile -d=ssa/<phase>/<flag>[=<value>|<function_name>]
where:
- <phase> is one of:
check, all, build, intrinsics, early_phielim, early_copyelim
early_deadcode, short_circuit, decompose_user, opt, zero_arg_cse
opt_deadcode, generic_cse, phiopt, nilcheckelim, prove
decompose_builtin, softfloat, late_opt, generic_deadcode, check_bce
branchelim, fuse, dse, writebarrier, insert_resched_checks, lower
lowered_cse, elim_unread_autos, lowered_deadcode, checkLower
late_phielim, late_copyelim, tighten, phi_tighten, late_deadcode
critical, likelyadjust, layout, schedule, late_nilcheck, flagalloc
regalloc, loop_rotate, stackframe, trim
- <flag> is one of:
on, off, debug, mem, time, test, stats, dump
- <value> defaults to 1
- <function_name> is required for the "dump" flag, and specifies the
name of function to dump after <phase>
Phase "all" supports flags "time", "mem", and "dump".
Phase "intrinsics" supports flags "on", "off", and "debug".
If the "dump" flag is specified, the output is written on a file named
<phase>__<function_name>_<seq>.dump; otherwise it is directed to stdout.
Also add a few examples at the bottom.
Fixes#20349
Change-Id: I334799e951e7b27855b3ace5d2d966c4d6ec4cff
Reviewed-on: https://go-review.googlesource.com/110062
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
The prove pass sometimes has bounds information
that later rewrite passes do not.
Use this information to mark shifts as bounded,
and then use that information to generate better code on amd64.
It may prove to be helpful on other architectures, too.
While here, coalesce the existing shift lowering rules.
This triggers 35 times building std+cmd. The full list is below.
Here's an example from runtime.heapBitsSetType:
if nb < 8 {
b |= uintptr(*p) << nb
p = add1(p)
} else {
nb -= 8
}
We now generate better code on amd64 for that left shift.
Updates #25087
vendor/golang_org/x/crypto/curve25519/mont25519_amd64.go:48:20: Proved Rsh8Ux64 bounded
runtime/mbitmap.go:1252:22: Proved Lsh64x64 bounded
runtime/mbitmap.go:1265:16: Proved Lsh64x64 bounded
runtime/mbitmap.go:1275:28: Proved Lsh64x64 bounded
runtime/mbitmap.go:1645:25: Proved Lsh64x64 bounded
runtime/mbitmap.go:1663:25: Proved Lsh64x64 bounded
runtime/mbitmap.go:1808:41: Proved Lsh64x64 bounded
runtime/mbitmap.go:1831:49: Proved Lsh64x64 bounded
syscall/route_bsd.go:227:23: Proved Lsh32x64 bounded
syscall/route_bsd.go:295:23: Proved Lsh32x64 bounded
syscall/route_darwin.go:40:23: Proved Lsh32x64 bounded
compress/bzip2/bzip2.go:384:26: Proved Lsh64x16 bounded
vendor/golang_org/x/net/route/address.go:370:14: Proved Lsh64x64 bounded
compress/flate/inflate.go:201:54: Proved Lsh64x64 bounded
math/big/prime.go:50:25: Proved Lsh64x64 bounded
vendor/golang_org/x/crypto/cryptobyte/asn1.go:464:43: Proved Lsh8x8 bounded
net/ip.go:87:21: Proved Rsh8Ux64 bounded
cmd/internal/goobj/read.go:267:23: Proved Lsh64x64 bounded
cmd/vendor/golang.org/x/arch/arm64/arm64asm/decode.go:534:27: Proved Lsh32x32 bounded
cmd/vendor/golang.org/x/arch/arm64/arm64asm/decode.go:544:27: Proved Lsh32x32 bounded
cmd/internal/obj/arm/asm5.go:1044:16: Proved Lsh32x64 bounded
cmd/internal/obj/arm/asm5.go:1065:10: Proved Lsh32x32 bounded
cmd/internal/obj/mips/obj0.go:1311:21: Proved Lsh32x64 bounded
cmd/compile/internal/syntax/scanner.go:352:23: Proved Lsh64x64 bounded
go/types/expr.go:222:36: Proved Lsh64x64 bounded
crypto/x509/x509.go:1626:9: Proved Rsh8Ux64 bounded
cmd/link/internal/loadelf/ldelf.go:823:22: Proved Lsh8x64 bounded
net/http/h2_bundle.go:1470:17: Proved Lsh8x8 bounded
net/http/h2_bundle.go:1477:46: Proved Lsh8x8 bounded
net/http/h2_bundle.go:1481:31: Proved Lsh64x8 bounded
cmd/compile/internal/ssa/rewriteARM64.go:18759:17: Proved Lsh64x64 bounded
cmd/compile/internal/ssa/sparsemap.go:70:23: Proved Lsh32x64 bounded
cmd/compile/internal/ssa/sparsemap.go:73:45: Proved Lsh32x64 bounded
Change-Id: I58bb72f3e6f12f6ac69be633ea7222c245438142
Reviewed-on: https://go-review.googlesource.com/109776
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
When a loop has bound len(s)-delta, findIndVar detected it and
returned len(s) as (conservative) upper bound. This little lie
allowed loopbce to drop bound checks.
It is obviously more generic to teach prove about relations like
x+d<w for non-constant "w"; we already handled the case for
constant "w", so we just want to learn that if d<0, then x+d<w
proves that x<w.
To be able to remove the code from findIndVar, we also need
to teach prove that len() and cap() are always non-negative.
This CL allows to prove 633 more checks in cmd+std. Most
of them are cases where the code was already testing before
accessing a slice but the compiler didn't know it. For instance,
take strings.HasSuffix:
func HasSuffix(s, suffix string) bool {
return len(s) >= len(suffix) && s[len(s)-len(suffix):] == suffix
}
When suffix is a literal string, the compiler now understands
that the explicit check is enough to not emit a slice check.
I also found a loopbce test that was incorrectly
written to detect an overflow but had a off-by-one (on the
conservative side), so it unexpectly passed with this CL; I
changed it to really trigger the overflow as intended.
Change-Id: Ib5abade337db46b8811425afebad4719b6e46c4a
Reviewed-on: https://go-review.googlesource.com/105635
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
To be effective, this also requires being able to relax constraints
on min/max bound inclusiveness; they are now exposed through a flags,
and prove has been updated to handle it correctly.
Change-Id: I3490e54461b7b9de8bc4ae40d3b5e2fa2d9f0556
Reviewed-on: https://go-review.googlesource.com/104041
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Test both minimum and maximum bound, and prepare
formatting for more advanced tests (inclusive / esclusive bounds).
Change-Id: Ibe432916d9c938343bc07943798bc9709ad71845
Reviewed-on: https://go-review.googlesource.com/104040
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reuse findIndVar to discover induction variables, and then
register the facts we know about them into the facts table
when entering the loop block.
Moreover, handle "x+delta > w" while updating the facts table,
to be able to prove accesses to slices with constant offsets
such as slice[i-10].
Change-Id: I2a63d050ed58258136d54712ac7015b25c893d71
Reviewed-on: https://go-review.googlesource.com/104038
Run-TryBot: Giovanni Bajo <rasky@develer.com>
Reviewed-by: David Chase <drchase@google.com>
When a branch is followed, we apply the relation as described
in the domain relation table. In case the relation is in the
positive domain, we can also infer an unsigned relation if,
by that point, we know that both operands are non-negative.
Fixes#20393
Change-Id: Ieaf0c81558b36d96616abae3eb834c788dd278d5
Reviewed-on: https://go-review.googlesource.com/100278
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Reviewed-by: David Chase <drchase@google.com>
There are several things combined in this change.
First, eliminate the gobitvector type in favor
of adding a ptrbit method to bitvector.
In non-performance-critical code, use that method.
In performance critical code, though, load the bitvector data
one byte at a time and iterate only over set bits.
To support that, add and use sys.Ctz8.
name old time/op new time/op delta
StackCopyPtr-8 81.8ms ± 5% 78.9ms ± 3% -3.58% (p=0.000 n=97+96)
StackCopy-8 65.9ms ± 3% 62.8ms ± 3% -4.67% (p=0.000 n=96+92)
StackCopyNoCache-8 105ms ± 3% 102ms ± 3% -3.38% (p=0.000 n=96+95)
Change-Id: I00b80f45612708bd440b1a411a57fa6dfa24aa74
Reviewed-on: https://go-review.googlesource.com/109716
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
getArgInfo is called a lot during stack copying.
In the common case it doesn't do much work,
but it cannot be inlined.
This change works around that.
name old time/op new time/op delta
StackCopyPtr-8 108ms ± 5% 96ms ± 4% -10.40% (p=0.000 n=20+20)
StackCopy-8 82.6ms ± 3% 78.4ms ± 6% -5.15% (p=0.000 n=19+20)
StackCopyNoCache-8 130ms ± 3% 122ms ± 3% -6.44% (p=0.000 n=20+20)
Change-Id: If7d8a08c50a4e2e76e4331b399396c5dbe88c2ce
Reviewed-on: https://go-review.googlesource.com/108945
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Currently, when the runtime looks up the stack map for a frame, it
uses frame.continpc - 1 unless continpc is the function entry PC, in
which case it uses frame.continpc. As a result, if continpc is the
function entry point (which happens for deferred frames), it will
actually look up the stack map *following* the first instruction.
I think, though I am not positive, that this is always okay today
because the first instruction of a function can never change the stack
map. It's usually not a CALL, so it doesn't have PCDATA. Or, if it is
a CALL, it has to have the entry stack map.
But we're about to start emitting stack maps at every instruction that
changes them, which means the first instruction can have PCDATA
(notably, in leaf functions that don't have a prologue).
To prepare for this, tweak how the runtime looks up stack map indexes
so that if continpc is the function entry point, it directly uses the
entry stack map.
For #24543.
Change-Id: I85aa818041cd26aff416f7b1fba186e9c8ca6568
Reviewed-on: https://go-review.googlesource.com/109349
Reviewed-by: Rick Hudson <rlh@golang.org>
This instruction was introduced on the z14 to accelerate "limbified"
multiplications for certain cryptographic algorithms. This change allows
it to be used in Go assembly.
Change-Id: Ic93dae7fec1756f662874c08a5abc435bce9dd9e
Reviewed-on: https://go-review.googlesource.com/109695
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Current optab entries are unordered, because the new instructions
are added at the end of the optab. The patch reorders them by comments
in optab, such as arithmetic operations, logical operations and a
series of load/store etc.
The patch removes the VMOVS opcode because FMOVS already has the same
operation.
Change-Id: Iccdf89ecbb3875b9dfcb6e06be2cc19c7e5581a2
Reviewed-on: https://go-review.googlesource.com/109896
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Return a non-zero exit code if the WebAssembly host fails to compile
the WebAssmbly bytecode to machine code.
Change-Id: I774309db2872b6a2de77a1b0392608058414160d
Reviewed-on: https://go-review.googlesource.com/110097
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The init function and runtime.addmoduledata were not added when
building plugin, which caused the runtime could not find the
module.
Testplugin is still not enabled on linux/arm64
(https://go.googlesource.com/go/+/master/src/cmd/dist/test.go#948)
because the gold linker on the builder is too old, which fails
with an internal error (see issue #17138). I tested locally and
it passes.
Fixes#24940.
Updates #17138.
Change-Id: I26aebca6c38a3443af0949471fa12b6d550e8c6c
Reviewed-on: https://go-review.googlesource.com/109917
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
mips64 softfloat support is based on mips implementation and introduces
new enviroment variable GOMIPS64.
GOMIPS64 is a GOARCH=mips64{,le} specific option, for a choice between
hard-float and soft-float. Valid values are 'hardfloat' (default) and
'softfloat'. It is passed to the assembler as
'GOMIPS64_{hardfloat,softfloat}'.
Change-Id: I7f73078627f7cb37c588a38fb5c997fe09c56134
Reviewed-on: https://go-review.googlesource.com/108475
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
As a follow-up to the first README for cmd/compile/internal/ssa.
Since this is the parent package for all the compiler packages, this
README serves as an overview of the compiler and its packages. As more
READMEs are added for specific parts with more detail, such as ssa's,
they can be linked from this one.
Thanks to Iskander Sharipov, Josh Bleecher Snyder, Matthew Dempsky,
Alberto Donizetti, and Robert Griesemer for helping with all the details
in this document.
Change-Id: I820a535e25dce86ccc667ce1c6e92b75fc32f3af
Reviewed-on: https://go-review.googlesource.com/103935
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
If the vetted function supplies zero arguments, previously you would
get an error message like this:
Printf format %v reads arg #1, but call has only 0 args
"has only 0 args" is an odd construction, and "has 0 args" sounds
better. Getting rid of "only" in all cases simplifies the code and
reads just as well.
Change-Id: I4706dfe4a75f13bf4db9c0650e459ca676710752
Reviewed-on: https://go-review.googlesource.com/109457
Run-TryBot: Kevin Burke <kev@inburke.com>
Run-TryBot: David Symonds <dsymonds@golang.org>
Reviewed-by: David Symonds <dsymonds@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Simplify some C-style loops with range statements, and move some
declarations closer to their uses.
While at it, ensure that all the SymbolType consts are typed.
Change-Id: I04b06afb2c1fb249ef8093a0c5cca0a597d1e05c
Reviewed-on: https://go-review.googlesource.com/105217
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Using oldname+resolve is how typecheck handles this anyway.
Passes toolstash -cmp, with both -iexport enabled and disabled.
Change-Id: I12b0f0333d6b86ce6bfc4d416c461b5f15c1110d
Reviewed-on: https://go-review.googlesource.com/109715
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Getcallerpc/sp no longer takes argument.
Change-Id: I80b30020e798990c59c8ffd0a4e078af6a75aea0
Reviewed-on: https://go-review.googlesource.com/109696
Reviewed-by: Ian Lance Taylor <iant@golang.org>
