Currently, the two places that run the cover tool manually construct a
terse command description. However, this actually prevents Builder.run
from constructing a more detailed description from the actual command
being run. Fix this by passing "" as the description to get the
default behavior.
Change-Id: I27d42cb1fda9bba70c631dc43417a03b8bddec92
Reviewed-on: https://go-review.googlesource.com/c/go/+/534157
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Auto-Submit: Austin Clements <austin@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
The documentation link only works with exported identifiers. Further,
the built-in error interface lives in pseudo package "builtin" only,
thus it's not a real package that can be referred using doc links.
Change-Id: I2116beb27fc73ba33f8352301fe77b4b6abc3ec1
Reviewed-on: https://go-review.googlesource.com/c/go/+/534436
Reviewed-by: Robert Findley <rfindley@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Alan Donovan <adonovan@google.com>
This reverts commit http://go.dev/cl/349650
Reason for revert: CL breaks multiple builders with failure in TestLargeTextSectionSplitting
Change-Id: I4894ffd101b2757a6e6359212d5b8a64da1fcdf0
Reviewed-on: https://go-review.googlesource.com/c/go/+/534299
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Auto-Submit: Than McIntosh <thanm@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
If trampolines may be required, the current text addressing second
pass resets all assigned addresses, before assigning addresses and
laying down trampolines in a linear fashion. However, this approach
means that intra-package calls are to a symbol that has not yet
been assigned an address, when the symbol is ahead of the current
function.
In the case of RISC-V the JAL instruction is limited to +/-1MiB.
As such, if a call is to a symbol with no address currently assigned,
we have to assume that a trampoline will be required. During the
relocation phase we can fix up and avoid trampolines in some cases,
however this results in unused trampolines that are still present
in the binary (since removing them would change text addresses).
In order to significantly reduce the number of unused trampolines,
assign temporary addresses to functions within the same package,
based on the maximum number of trampolines that may be required by
a function. This allows for better decisions to be made regarding
the requirement for intra-package trampolines, as we reset the
addressing for a function, assign its final address and lay down
any resulting trampolines.
This results in ~2,300 unused trampolines being removed from the
Go binary and ~5,600 unused trampolines being removed from the
compile binary, on linux/riscv64.
Change-Id: I8a9cf035dea82e1e1e66ae5b1093dce78e4ff0d1
Reviewed-on: https://go-review.googlesource.com/c/go/+/349650
Run-TryBot: Joel Sing <joel@sing.id.au>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Do this by removing all stores of zero-sized anything.
Fixes#63433.
Change-Id: I5d8271edab992d15d02005fa3fe31835f2eff8fa
Reviewed-on: https://go-review.googlesource.com/c/go/+/534296
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Pull in a security fix from x/net/http2:
http2: limit maximum handler goroutines to MaxConcurrentStreams
Fixes#63417.
Fixes CVE-2023-39325.
Change-Id: I01e7774912e81007a7cf70f33e5989fb50a0b708
Cq-Include-Trybots: luci.golang.try:gotip-linux-amd64-longtest
Reviewed-on: https://go-review.googlesource.com/c/go/+/534295
Auto-Submit: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Change-Id: I06403cf217a4d2645e13115e7ca358b7f3d3f2ef
GitHub-Last-Rev: e2b4e5326a
GitHub-Pull-Request: golang/go#63474
Reviewed-on: https://go-review.googlesource.com/c/go/+/533875
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
The "by Cleanup" detail about the removal mechanism is not necessary for
users. The previous wording could even cause confusion whether they
should do something for Cleanup to occur.
Change-Id: I617a7a4e118a70a3ad8a83a2d81cd911dde8ee08
GitHub-Last-Rev: fba4cde636
GitHub-Pull-Request: golang/go#63479
Reviewed-on: https://go-review.googlesource.com/c/go/+/534016
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
The final revision of
https://go-review.googlesource.com/c/go/+/528975
made a small change to the RISCV64.rules file but neglected to update
the regenerated rewriteRISCV64.go file.
Change-Id: I04599f4e3b0dac7102c54166c9bae6fc9b6621d1
Reviewed-on: https://go-review.googlesource.com/c/go/+/533815
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Auto-Submit: Dmitri Shuralyov <dmitshur@golang.org>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Change-Id: I86eb365650749bb4f41e9ae62123674581dffe2b
GitHub-Last-Rev: 7a9d6800ab
GitHub-Pull-Request: golang/go#63449
Reviewed-on: https://go-review.googlesource.com/c/go/+/533120
Auto-Submit: Ian Lance Taylor <iant@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: qiulaidongfeng <2645477756@qq.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Change-Id: I340e892aa4ecc780905be984016efc86699a45a2
Reviewed-on: https://go-review.googlesource.com/c/go/+/533556
Run-TryBot: shuang cui <imcusg@gmail.com>
Reviewed-by: qiulaidongfeng <2645477756@qq.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Mauri de Souza Meneguzzo <mauri870@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Fixes#61870
Updates #61727
Change-Id: Iaef9b59c402d68f6bf64be212db2b6746abe8900
Reviewed-on: https://go-review.googlesource.com/c/go/+/526855
Reviewed-by: Ian Lance Taylor <iant@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Auto-Submit: Dmitri Shuralyov <dmitshur@google.com>
Like sort.Search, use "h := int(uint(i+j) >> 1)" to compute the median h.
Change-Id: I62c1e67533657e2b56af872676e5dc4ed4d49c55
GitHub-Last-Rev: cbfba7ee9a
GitHub-Pull-Request: golang/go#63439
Reviewed-on: https://go-review.googlesource.com/c/go/+/533595
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
TestGdbPython fails on some Windows setups because the line endings in
the output of the gdb command can potentially be CRLF, but the test
expects LF.
This CL changes the test to normalize the line endings.
Change-Id: Iada9c37dc98249ac3c5f1edca4a657c51d4382a2
Reviewed-on: https://go-review.googlesource.com/c/go/+/532816
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Quim Muntal <quimmuntal@gmail.com>
Auto-Submit: Quim Muntal <quimmuntal@gmail.com>
The Builder returned by work.NewBuilder is already setup to print to
os.Stderr, so it's not necessary for runRun to set b.Print to a
different function that does exactly the same thing.
This b.Print assignment was introduced in CL 5591045. At the time, the
builder type defaulted to printing to os.Stdout, so this was necessary
to make "go run" print build errors to stderr.
Change-Id: I0c07984616c5efc37ba681f4cf69e83542566bab
Reviewed-on: https://go-review.googlesource.com/c/go/+/522796
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
It is one less dependent load away, and right next to another
field in the itab we also load as part of the type switch or
type assert.
Change-Id: If7aaa7814c47bd79a6c7ed4232ece0bc1d63550e
Reviewed-on: https://go-review.googlesource.com/c/go/+/533117
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Before range over integer, types2 leaves constant expression in RHS of
non-constant shift untyped, so idealType do the validation to ensure
that constant value must be an int >= 0.
With range over int, the range expression can also be left untyped, and
can be an negative integer, causing the validation false.
Fixing this by relaxing the validation in idealType, and moving the
check to Unified IR reader.
Fixes#63378
Change-Id: I43042536c09afd98d52c5981adff5dbc5e7d882a
Reviewed-on: https://go-review.googlesource.com/c/go/+/532835
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Keith Randall <khr@golang.org>
This is one of the more complex areas of the (pre-generics)
spec, and I'm probably not the only person who can never
remember all the details each time I need them.
Change-Id: I25b3c46311df4db33357af5601c5e3586327dac2
Reviewed-on: https://go-review.googlesource.com/c/go/+/533736
Reviewed-by: Robert Griesemer <gri@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Auto-Submit: Alan Donovan <adonovan@google.com>
This adds more variations for sizes of the input text
to the gcm tests.
Change-Id: I39dba5f08c77f04f94278200c3ce9234f977506f
Reviewed-on: https://go-review.googlesource.com/c/go/+/532635
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
Reviewed-by: Than McIntosh <thanm@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
This is the last of the getitab users to receive a cache.
We should now no longer see getitab (and callees) in profiles.
Hopefully.
Change-Id: I2ed72b9943095bbe8067c805da7f08e00706c98c
Reviewed-on: https://go-review.googlesource.com/c/go/+/531055
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
It is tricky to use those types directly, because the layout of those
types in the compiler may not be the same as the layout of those
types in target binary (typically because of 32 vs 64 bit differences).
Instead, translate an internal/abi type into a cmd/compile/internal/types
type, which will then be laid out for the target machine.
Along with the translation, keep track of where all the bits of the
type are so we can reference their locations symbolically instead of
hardcoding them.
Change-Id: I2694c58968d4dc7ead63a2b1b29adfedd90ddd2e
Reviewed-on: https://go-review.googlesource.com/c/go/+/532155
Reviewed-by: David Chase <drchase@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Auto-Submit: Keith Randall <khr@google.com>
Reviewed-by: Keith Randall <khr@google.com>
The correct load factor is 6.5, not 6.
This got broken by accident in CL 462115.
Fixes#63438
Change-Id: Ib07bb6ab6103aec87cb775bc06bd04362a64e489
Reviewed-on: https://go-review.googlesource.com/c/go/+/533279
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
CL 419456 starts using lookupObj to find types2.Object associated with
builtin functions. However, the new code does not un-parenthesized the
callee expression, causing an ICE because of nil obj returned.
Un-parenthesizing the callee expression fixes the problem.
Fixes#63436
Change-Id: Iebb4fbc08575e7d0b1dbd026c98e8f949ca16460
Reviewed-on: https://go-review.googlesource.com/c/go/+/533476
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Lowering for OpConvert was removed for all architectures in CL#108496,
prior to the riscv64 port being upstreamed. Remove lowering of OpConvert
on riscv64, which brings it inline with all other architectures. This
results in 1,600+ instructions being removed from the riscv64 go binary.
Change-Id: Iaaf1f8b397875926604048b66ad8ac91a98c871e
Reviewed-on: https://go-review.googlesource.com/c/go/+/533335
Run-TryBot: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
As observed in https://go.dev/issue/61666#issuecomment-1739476954,
if a -run flag value matches no tests, dist test output doesn't do much
to help users notice that was what happened. It is valid and sometimes
intended¹ to match no tests, so I want to reserve failed status with
exit code 1 to the actionable outcome where at least 1 test failed.
But it seems reasonable to extend the existing "some were excluded"
mechanism of reporting partial testing to be more helpful.
In non-JSON mode, which is more likely to be used manually by humans,
print a special² last line that will hopefully be easier to notice when
matching no tests wasn't intended. Change nothing for -json mode since
that's likely used by machines and they can make sense of 0 JSON events.
The go test command already has this behavior, so this brings dist test
closer³ to it. (Slightly unfortunate duplicate maintenance for us, and
the need for the rare dist test users to learn its CLI quirks; oh well.)
¹ It might seem counter-intuitive at first: what's the point of calling
dist test and asking it to run no tests? One possible answer is that
it permits writing code capable of running N intended tests, where N
is 0 or higher. That is, it allows for 0 to not be a special case that
the caller would have no choice but handle differently.
² I initially considered making it say something like "N of M tests were
excluded", but decided to leave it alone since the current coordinator
code still has that text hardcoded and I don't want to break it. Hence
the new status that I expect only humans will see. And it seems better
this way anyway.
³ In particular, the "matched no tests" and "no tests to run" phrases
were selected precisely because they're already used in cmd/go output.
Change-Id: I6768d9932587195ae6dbc6e2c4742479e265733b
Reviewed-on: https://go-review.googlesource.com/c/go/+/532115
Reviewed-by: Austin Clements <austin@google.com>
Auto-Submit: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
This makes some improvements to the xorBytes assembler
implementation for PPC64 targets.
The loops to process large streams of bytes has been changed to
do 64 bytes at a time. Other changes were made to prevent
degradations in some of the common sizes like 8, 16.
The case for < 8 bytes on power10 has been modified to use
the LXVL and STXVL instructions.
Change-Id: I7477d12d5375d484af8c274443d595ccdafbda7c
Reviewed-on: https://go-review.googlesource.com/c/go/+/530877
Reviewed-by: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Jayanth Krishnamurthy <jayanth.krishnamurthy@ibm.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Reviewed-by: Benny Siegert <bsiegert@gmail.com>
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
Change-Id: If9089f8afd78de3e62cd575f642ff96ab69e2099
GitHub-Last-Rev: 14165018d6
GitHub-Pull-Request: golang/go#63386
Reviewed-on: https://go-review.googlesource.com/c/go/+/532895
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: Jorropo <jorropo.pgm@gmail.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Auto-Submit: Michael Pratt <mpratt@google.com>
Convert expand calls into a smaller number of focused
recursive rewrites, and rely on an enhanced version of
"decompose" to clean up afterwards.
Debugging information seems to emerge intact.
Change-Id: Ic46da4207e3a4da5c8e2c47b637b0e35abbe56bb
Reviewed-on: https://go-review.googlesource.com/c/go/+/507295
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
The branch taken by the bytealg.Count algorithm used to process a single
32 bytes block per loop iteration. Throughput of the algorithm can be
improved by unrolling two iterations per loop: the lack of data
dependencies between each iteration allows for better utilization of the
CPU pipeline. The improvement is most significant on medium size payloads
that fit in the L1 cache; beyond the L1 cache size, memory bandwidth is
likely the bottleneck and the change does not show any measurable
improvements.
goos: linux
goarch: amd64
pkg: bytes
cpu: Intel(R) Xeon(R) CPU @ 2.60GHz
│ old.txt │ new.txt │
│ sec/op │ sec/op vs base │
CountSingle/10 4.800n ± 0% 4.811n ± 0% +0.23% (p=0.000 n=10)
CountSingle/32 5.445n ± 0% 5.430n ± 0% ~ (p=0.085 n=10)
CountSingle/4K 81.38n ± 1% 63.12n ± 0% -22.43% (p=0.000 n=10)
CountSingle/4M 133.0µ ± 7% 130.1µ ± 4% ~ (p=0.280 n=10)
CountSingle/64M 4.079m ± 1% 4.070m ± 3% ~ (p=0.796 n=10)
geomean 1.029µ 973.3n -5.41%
│ old.txt │ new.txt │
│ B/s │ B/s vs base │
CountSingle/10 1.940Gi ± 0% 1.936Gi ± 0% -0.22% (p=0.000 n=10)
CountSingle/32 5.474Gi ± 0% 5.488Gi ± 0% ~ (p=0.075 n=10)
CountSingle/4K 46.88Gi ± 1% 60.43Gi ± 0% +28.92% (p=0.000 n=10)
CountSingle/4M 29.39Gi ± 7% 30.02Gi ± 4% ~ (p=0.280 n=10)
CountSingle/64M 15.32Gi ± 1% 15.36Gi ± 3% ~ (p=0.796 n=10)
geomean 11.75Gi 12.42Gi +5.71%
Change-Id: I1098228c726a2ee814806dcb438b7e92febf4370
Reviewed-on: https://go-review.googlesource.com/c/go/+/532457
Reviewed-by: Mauri de Souza Meneguzzo <mauri870@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Michael Pratt <mpratt@google.com>
Auto-Submit: Keith Randall <khr@golang.org>
Reviewed-by: Michael Pratt <mpratt@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Like on other BSDs, use faccessat(AT_FDCWD, path, mode, AT_EACCESS)
Change-Id: I5b7649815651725ab9245aed3c8c1941ff9b7606
Reviewed-on: https://go-review.googlesource.com/c/go/+/532675
Reviewed-by: Michael Pratt <mpratt@google.com>
Auto-Submit: Tobias Klauser <tobias.klauser@gmail.com>
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
CL 469555 changed Compact to use append instead of bytes.Buffer.
appendCompact iterates over input src slice and performs escaping
of certain characters.
To optimize copying it does not copy characters one by one
but keeps track of the start offset of the data to copy when
it reaches next character to escape or the end of the input.
This start offset may become greater than input character offset
so copying of preceding data should check this condition.
CL 469555 removed boundary checks for copying data preceding
escaped characters and this change restores them.
Fixes https://github.com/golang/go/issues/63379
Change-Id: I5b7856239f256c67faf58834705675c0aea08cc2
GitHub-Last-Rev: 661576fb54
GitHub-Pull-Request: golang/go#63400
Reviewed-on: https://go-review.googlesource.com/c/go/+/533275
Run-TryBot: Joseph Tsai <joetsai@digital-static.net>
Reviewed-by: Michael Pratt <mpratt@google.com>
Reviewed-by: Joseph Tsai <joetsai@digital-static.net>
Reviewed-by: Benny Siegert <bsiegert@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
That way we don't need to call into the runtime for every
type assertion (to an interface type).
name old time/op new time/op delta
TypeAssert-24 3.78ns ± 3% 1.00ns ± 1% -73.53% (p=0.000 n=10+8)
Change-Id: I0ba308aaf0f24a5495b4e13c814d35af0c58bfde
Reviewed-on: https://go-review.googlesource.com/c/go/+/529316
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Mostly a reorganization to make further changes easier.
This reorganization will make it easier to add a cache in front
of the runtime call.
Leave the old code alone for dynamic type assertions (aka generics).
Change-Id: Ia7dcb7aeb1f63baf93584ccd792e8e31510e8aea
Reviewed-on: https://go-review.googlesource.com/c/go/+/529196
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
It is currently slightly better to pass the whole interface to these
functions, so that we don't need to spill/restore the data word across
the function call.
I'm adding a cache in front of these calls, which means we'll no longer
need a spill/restore in the common case, so it is better to just pass
the itab word.
It also makes unifying the logic between I2I and I2I2 versions easier.
Change-Id: I3c3e9fbb1e54890482840d76a1df79f4325bb5bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/528075
Reviewed-by: Keith Randall <khr@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
That way we don't need to call into the runtime when the type being
switched on has been seen many times before.
The cache is just a hash table of a sample of all the concrete types
that have been switched on at that source location. We record the
matching case number and the resulting itab for each concrete input
type.
The caches seldom get large. The only two in a run of all.bash that
get more than 100 entries, even with the sampling rate set to 1, are
test/fixedbugs/issue29264.go, with 101
test/fixedbugs/issue29312.go, with 254
Both happen at the type switch in fmt.(*pp).handleMethods, perhaps
unsurprisingly.
name old time/op new time/op delta
SwitchInterfaceTypePredictable-24 25.8ns ± 2% 2.5ns ± 3% -90.43% (p=0.000 n=10+10)
SwitchInterfaceTypeUnpredictable-24 37.5ns ± 2% 11.2ns ± 1% -70.02% (p=0.000 n=10+10)
Change-Id: I4961ac9547b7f15b03be6f55cdcb972d176955eb
Reviewed-on: https://go-review.googlesource.com/c/go/+/526658
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@google.com>
For type switches where the targets are interface types,
call into the runtime once instead of doing a sequence
of assert* calls.
name old time/op new time/op delta
SwitchInterfaceTypePredictable-24 26.6ns ± 1% 25.8ns ± 2% -2.86% (p=0.000 n=10+10)
SwitchInterfaceTypeUnpredictable-24 39.3ns ± 1% 37.5ns ± 2% -4.57% (p=0.000 n=10+10)
Not super helpful by itself, but this code organization allows
followon CLs that add caching to the lookups.
Change-Id: I7967f85a99171faa6c2550690e311bea8b54b01c
Reviewed-on: https://go-review.googlesource.com/c/go/+/526657
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@google.com>
- Un-export Convertop: it's only used by tcConv.
- Remove AssignOp1: introduced in CL 349614, only used by irgen.
- Un-export Assignop: it was exported to be used by irgen only.
Change-Id: I7e78b35d90f165c537cf32a104156bf2a13ca8b8
Reviewed-on: https://go-review.googlesource.com/c/go/+/532516
Reviewed-by: Keith Randall <khr@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
The types2 typechecker already reported all invalid conversions required
by the Go language spec. However, the conversion involves go pragma is
not specified in the spec, so is not checked by types2.
Fixing this by handling the error gracefully during typecheck, just like
how old typechecker did before CL 394575.
Fixes#63333
Change-Id: I04c4121971c62d96f75ded1794ab4bdf3a6cd0ea
Reviewed-on: https://go-review.googlesource.com/c/go/+/532515
Auto-Submit: Cuong Manh Le <cuong.manhle.vn@gmail.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
When the httpmuxgo121 GODEBUG setting was active, we were registering
patterns in the old and the new way. Fix to register only in the old
way.
Change-Id: Ibc1fd41e7f4d162ee5bc34575df409e1db5657cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/533095
Run-TryBot: Jonathan Amsterdam <jba@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Olena Synenka <olenasynenka@google.com>
Reviewed-by: Damien Neil <dneil@google.com>
CallExpr.X -> CallExpr.Fun
This consistent with go/ast and cmd/compile/internal/syntax.
OPRINTN -> OPRINTLN
This op represents the "println" builtin; might as well spell it the
same way.
Change-Id: Iead1b007776658c717879cf0997b3c48028428f4
Reviewed-on: https://go-review.googlesource.com/c/go/+/532795
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Add a new form of RLDC which maps directly to the ISA definition
of rldc: RLDC Rs, $sh, $mb, Ra. This is used to generate mask
constants described below.
Using MOVD $-1, Rx; RLDC Rx, $sh, $mb, Rx, any mask constant
can be generated. A mask is a contiguous series of 1 bits, which
may wrap.
Change-Id: Ifcaae1114080ad58b5fdaa3e5fc9019e2051f282
Reviewed-on: https://go-review.googlesource.com/c/go/+/531120
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
