Create a real type for protocol.DocumentURIs. Remove span.NewURI in
favor of path/URI-specific constructors. Remove span.Parse's ability to
parse URI-based spans, which appears to be totally unused.
As a consequence, we no longer mangle non-file URIs to start with
file://, and crash all over the place when one is opened.
Updates golang/go#33699.
Change-Id: Ic7347c9768e38002b4ad9c84471329d0af7d2e05
Reviewed-on: https://go-review.googlesource.com/c/tools/+/219482
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change reorders the logic within ModTidyHandle and ParseModHandle to parse the modfile first before we copy the contents to the temporary go.mod file. This was causing issues where a go.mod would be in a bad state and then we would try to run "go mod tidy" on the corrupted file.
Change-Id: I1df8fb70f5f3e2bcff306a58b16bc96c32debf2a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/219480
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change has a fix for mod/codelens: check if we get an error from ParseModHandles().Upgrades(). This change also only runs codelens on save.
Change-Id: I6dab7ddf3a08c650e4c670b039b1e99153ec8187
Reviewed-on: https://go-review.googlesource.com/c/tools/+/219478
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We were crashing in cases like:
1: func foo() {
2: if b<> <EOF>
We were trying to get the line start position for line 3, but there is
no line 3. Fix by bailing out early if we are the last line in the
file because there is nothing to fix in that case.
Fixesgolang/go#37226.
Change-Id: I4ad5746d7b55bdcc2de57c04e972c15a61084faa
Reviewed-on: https://go-review.googlesource.com/c/tools/+/219498
Run-TryBot: Muir Manders <muir@mnd.rs>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We had a deadlock in cases where a request was cancelled (1) after being
written to the stream, but (2) before a response was received. This
resulted in the request ID being removed from the pending map while the
server has the request, after which point the server response would hang
in Conn.Run trying to send to a nil channel.
After fixing this nil send there was still a race: it was possible that
Conn.Run could get the pending request, and Conn.Call would select
ctx.Done before Conn.Run could send to the response channel, again
resulting in a blocking send. Fix this by adding a buffer to the
response channel.
The response channel management is also made less forgiving, because we
should be able to reason precisely about how many sends and receives
will occur:
+ Don't close the response channel after sending a response: there
should only be one recipient.
+ Don't delete the ID from pending map twice: it should only be cleaned
up by Conn.Call.
Cancellation tests in the lsprpc package are updated to exercise the
race conditions.
Fixesgolang/go#37159
Change-Id: Ie3207442ea910f79247b18d8647fd52f39fb15db
Reviewed-on: https://go-review.googlesource.com/c/tools/+/219126
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Add a new Forwarder type to the lsprpc package, which implements the
jsonrpc2.StreamServer interface. This will be used to establish some
parity in the implementation of shared and singleton gopls servers.
Much more testing is needed, as is handling for the many edge cases
around forwarding the LSP, but since this is functionally equivalent to
TCP forwarding (and the -remote flag was already broken), I went ahead
and used the Forwarder to replace the forward method in the serve
command. This means that we can now use the combination of -listen and
-remote to chain together gopls servers... not that there's any reason
to do this.
Also, wrap the new regression tests with a focus on expressiveness when
testing the happy path, as well as parameterizing them so that they can
be run against different client/server execution environments. This
started to be sizable enough to warrant moving them to a separate
regtest package. The lsprpc package tests will instead focus on unit
testing the client-server binding logic.
Updates golang/go#36879
Updates golang/go#34111
Change-Id: Ib98131a58aabc69299845d2ecefceccfc1199574
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218698
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change adds a code lens for go.mod files that will let a user know if a module can be upgraded, once it is clicked gopls will run a command to update that module.
Updates golang/go#36501
Change-Id: Id22b8097ede4972cf73bc029ec927544a71b7150
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218557
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Dangling selectors such as:
func _() {
x.
}
var x struct { i int }
tend to wreak havoc on the AST. In the above example you didn't used
to get completions because the declaration of "x" was missing from the
AST.
We now work around this issue by inserting a "_" into the source code
before parsing to make the selector valid:
func _() {
x._ // <-- insert "_" here
}
var x struct { i int }
This makes completion work as expected because the declaration of "x"
is present in the AST.
I had to change fixAST() to be called before fixSrc() because
otherwise this new workaround in fixSrc() breaks the "accidental
keyword" countermeasures in fixAST().
Fixesgolang/go#31973.
Updates golang/go#31687.
Change-Id: Ia7ef6c045a9c71502d1b8b36f187ac9b8a85fe21
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216484
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change allows to use fuzzy or case-sensitive matchers in addition
to case-insensitive when searching for symbols.
Matcher is specified by UserOptions.Matcher just like Completion.
Updates golang/go#33844
Change-Id: I4000fb7984c75f0f41c38d740dbe164398032312
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218737
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change fixes an issue where import errors would not disappear when creating new files in a module by removing the segment of code where we check for listErrors when fixing imports.
Updates golang/go#36960
Change-Id: Iefa17edeb0417cac7e33ffa88faf7c9a607e98b3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/219222
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
PrepareRename used to return interface{}, but now returns the more
precise result *Range.
Almost all the changes in code.ts come from vscode reformatting it.
The sole substantive change is in goUnionType, near line 685.
Change-Id: If575cb166f26962d24261e79f9d958006011402e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/219077
Run-TryBot: Peter Weinberger <pjw@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
In cases like:
if i := foo<>
we get an *ast.BadExpr because the parser is expecting the condition
expression, but "i := foo" is not a valid expression. Now we move the
statement into the "init" field and add a dummy "cond" expression.
We also needed a slight tweak to our missing curly brace fix. Now we
insert an extra semicolon in cases like:
for i := 0; i < foo
yielding
for i := 0; i < foo;{}
The parser doesn't like having only two clauses in the three clause
"for" statement.
Updates golang/go#31687.
Change-Id: I12d51e0d8af03436741227753f8e71452a463b05
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216483
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
In cases like:
func _() {
if fo<>
}
func foo() {}
Completing at "<>" does not include "foo" because the missing "if"
opening curly brace renders the rest of the file unparseable. "foo"
doesn't exist in the AST, so as far as gopls is concerned it doesn't
exist at all.
To fix this, we detect when a block is missing opening "{" and we
insert stub "{}" to make things parse better. This is a different kind
of fix than our previous *ast.BadExpr handling because we must reparse
the file after tweaking the source. After reparsing we maintain the
original syntax error so the user sees consistent error messages. This
also avoids having the "{}" spring into existence when the user
formats the file.
Fixesgolang/go#31907.
Updates golang/go#31687.
Change-Id: I95ba60a11f7dd23dc484c063b4fd7ad77daa4e08
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216482
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change turns the tempModfile flag on by default in the master branch.
Change-Id: If96369aee4e970421a80d5ff89385a38c7ccf0b2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/219225
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Currently there is no need for this because the file contents are part
of the file handle. This change is in preparation for an impending
improvement that tweaks the source code during the parse stage to fix
certain kind of terminal parse errors. Any code that wants to use
an *ast.File or *token.File in conjunction with the file contents
needs access to the doctored source code so things line up.
Change-Id: I59d83d3d6150aa1264761aa2c1f6c1269075a2ce
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218979
Run-TryBot: Muir Manders <muir@mnd.rs>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We were crashing in cases like:
var _ []byte = append([]byte{}, ""...<>)
We were type asserting the type of append's second param
to *types.Slice, but in this case it is a string (*types.Basic). Fix
by checking the type assert was successful.
Note that we still don't attempt to give string completions when
appending to a byte slice. We can add that special case later once
everyone is clamoring for it.
Change-Id: I1d2fbd7f538e580d33c2dab4ef127a88e16d7ced
Reviewed-on: https://go-review.googlesource.com/c/tools/+/219144
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Now when we expect a type name at the cursor, we omit non-type name
completion candidates. For example:
inch := 1
var foo in<> // don't offer "inch"
I also added expected type name detection for value specs:
// Expect a type name at <>
var foo <>
Fixesgolang/go#32806.
Change-Id: I32477cb286d2050bac5ccc767f8a608124fa5acd
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216400
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Users with staticcheck enabled will be more tolerant of increased RAM
usage. We might be able to disable this check entirely once the next
version of staticcheck is released with a similar analysis (https://staticcheck.io/docs/checks#SA5011).
Change-Id: I1a844cc226e34e0f62222f12912797a6cc9d06e2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/219018
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
We were previously only invalidating files if they were contained within
a subdirectory of a view, but we should really be invalidating all files
that are known to a view.
Fixesgolang/go#34955
Change-Id: I2eb1476e6b5f74a64dbb6d47459f4009648c720d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218859
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
As of https://golang.org/cl/218457, logs are not being captured because
the logfile is prematurely closed due to the scope of the deferred
closure changing.
Change-Id: I1754e5555025c7b2a5da58f621184d6740fd03cb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/219080
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Now we keep a count of how many times to dereference a candidate. For
example:
var foo ***int
var _ int = f<> // Now we offer "***foo" instead of "*foo".
Change-Id: I14edc40aeec6884399eceb3dd3b4f85dc74a773c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218580
Run-TryBot: Muir Manders <muir@mnd.rs>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
When completing a composite literal value, we were returning from
candidate inference before we recorded type modifiers such as prefix
"&" or "*". This was causing funny completions like:
type myStruct struct { s *myStruct }
myStruct{s: &mySt<> // completed to "&&myStruct{}"
Now we properly pick up on the "&" prefix so we know our literal
"myStruct{}" candidate does not need a "&".
Change-Id: I908936698cfedfef81bc0c1cbcd93e14dc00e3a3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218377
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Currently we show up to ~100 unimported package names matching the
completion prefix. This isn't useful since, assuming the user even
wants an unimported package, they will just type more to narrow it
down rather than scroll through 100 options. Having so many candidates
also slows things down due to per-candidate overhead in gopls and in
the LSP client. Now we instead limit to 5 unimported package names.
Unimported package members, on the other hand, make sense to list
many. The user may want to scroll through because they don't remember
the name of what they are looking for. I left the max value at 100.
Change-Id: I00e11fa0420758f8db6c7049f80fa156773a5ee6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218879
Run-TryBot: Muir Manders <muir@mnd.rs>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We've had various reports of high memory usage in gopls. Catching it in
the act can be difficult, so check every second and write relevant
profiles to os.TempDir every time the heap reaches a new watermark.
Note that the logging in this package is broken. I didn't fix it, so
nobody will know this is happening until we tell them. So it goes.
Change-Id: I972d7ccfe5308658f86dde717465f0e0151b396d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218858
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This CL deletes ./internal/module and ./internal/semver, which are
copies of packages in golang.org/x/mod. The copies were created before
x/mod was a separate module.
./internal/imports is updated to use the packages in x/mod.
Change-Id: Id434f5f0a240de97d18505cb7c925c2e062f6231
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218897
Run-TryBot: Jay Conrod <jayconrod@google.com>
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change adds a buildFlags variable to the processEnv struct rather than appending them to the GOFLAGS by using a space separator.
Fixesgolang/go#37108
Change-Id: I4331066c30fa51f0133504d723132527b00ce74a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218857
Reviewed-by: Heschi Kreinick <heschi@google.com>
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We now carry around a debug instance in the app, and it manages the log file and
all telemetry
Change-Id: If4a51a36c38ef301b1b2bbda8e4c0a8d9bfc3c04
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218457
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
When completing members on a type checked, unimported package, you get
fully typed members. That means you get deep completions. Because we
downrank the initial unimported package members so much, any deep
completions were dominating the rankings. For example
context.Back<>
yielded "context.Background().Err" ranked above "context.Background".
Fix by scoring context.Background in this example as
stdScore+tinyRelevanceScore instead of just tinyRelevanceScore. I also
changed untyped candidate scores in the same way so they stay
competitive when you have both imported and unimported candidates.
The other option was to propagate the score penalty into deep
candidates, but that wasn't easy. In general I think you are better off
avoiding big score penalties because they complicate the interplay
between different kinds of candidates. Scoring needs an overhaul, but
at least we are building up our test suite in the meantime.
Change-Id: Ia5d32c057b04174229686cec6ac0542c30e186e2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218378
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Add a test for the bug reported in golang/go#37049: we are missing empty
diagnostics for deleted files. Doing this involved added a missing
RemoveFile method on the fake.Watcher type.
Skip the test for now, as it is failing.
Updates golang/go#37049
Updates golang/go#36879
Change-Id: Ib3b6907455cc44a2e6af00c2254aa444e9480749
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218278
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
A lot of bug reports originating from LSP clients are related to either
the timing or sequence of editor interactions with gopls (or at least
they're originally reported this way). For example: "when I open a
package and then create a new file, I lose diagnostics for existing
files". These conditions are often hard to reproduce, and to isolate as
either a gopls bug or a bug in the editor.
Right now we're relying on govim integration tests to catch these
regressions, but it's important to also have a testing framework that
can exercise this functionality in-process. As a starting point this CL
adds test fakes that implement a high level API for scripting editor
interactions. A fake workspace can be used to sandbox file operations; a
fake editor provides an interface for text editing operations; a fake
LSP client can be used to connect the fake editor to a gopls instance.
Some tests are added to the lsprpc package to demonstrate the API.
The primary goal of these fakes should be to simulate an client that
complies to the LSP spec. Put another way: if we have a bug report that
we can't reproduce with our regression tests, it should either be a bug
in our test fakes or a bug in the LSP client originating the report.
I did my best to comply with the spec in this implementation, but it
will certainly develop as we write more tests. We will also need to add
to the editor API in the future for testing more language features.
Updates golang/go#36879
Updates golang/go#34111
Change-Id: Ib81188683a7066184b8a254275ed5525191a2d68
Reviewed-on: https://go-review.googlesource.com/c/tools/+/217598
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We were recursing infinitely evaluating objects of recursive pointer
types such as "type foo *foo". Now we track named pointer types we
have already seen to avoid trying to dereference such objects forever.
I lazily initialized the "seen" map to avoid the allocation in the
normal case when you aren't dealing with named pointer types.
Fixesgolang/go#37104.
Change-Id: I5f294cfc5a641e7b5fd24e1d9dc55520726ea560
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218579
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Now that we build PackageHandles in load, we can simplify a lot of our
logic for rebuilding them and reloading metadata.
The only possibly-significant change is the missing imports logic. Now
that we always create package handles in load, we don't have to do the
extra "sameSet" logic. If the package handle hasn't been invalidated
since we last built it, we will keep the benefits of caching it. Otherwise,
it will be rebuilt in load.
Updates golang/go#36918
Change-Id: Ieb45898d248501e3cebdb95c8b518149ba7498e5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/217157
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
I'm starting to think that it might make more sense to show all
documentation on hover as a default. A number of people have requested
this behavior, and I think it would help ensure a more consistent
experience for users. We had originally defaulted to the synopsis
because VS Code Go had this behavior, but I see no reason to follow that
as a guideline.
Change-Id: I67aa530d253422550f59b5583e4c4a90ebd48f5b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/217727
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change largely reverts CL 217139, which attempted to guess a
package's parse mode based on whether or not it was in the user's
workspace. This ignored the fact that a user may jump to the definition
of a file outside of their workspace.
Fixesgolang/go#37045
Change-Id: Icb6b9d055bd1f260013227db1a6a34873c45b680
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218499
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Hold the session's overlay mutex the whole time we compute new overlays,
and then pass these overlays directly into clone. This avoids us calling
s.session.GetFile, which can return overlays that the snapshot doesn't
yet "know" about.
Change-Id: I1a10c78e26f8fec64550bfe0a97b5975ea8f976b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218321
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This is the first in a series of changes to move overlay handling to the
snapshot instead of the session. We may not be able to fully get away
from managing overlays on the session, but we should be able to only use
overlays when they are known to the snapshot.
Change-Id: I88b125117cd2cfbd0ff9ef16a944a34297c81b10
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218324
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change alters the key that is used to cache go.mod diagnostic changes, in particular it replaces using the snapshot ID with a string of all the imports used in the module and the hashed contents of the go.mod file. This reduces the number of times that we run "go mod tidy" to only when we detect import changes or the go.mod file is changed.
Change-Id: Icf49db34f44a4ae4772fff6dfb8b9a6955a8e2d6
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218238
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We now build an instance and invoke methods on it.
This is a step towards removing some global state,
allowing multiple instances in one process and cleaning
up some telemetry handling.
Change-Id: I067469fed39c96653fffe96945c79193e86458d8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218157
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This change adds quick fixes for diagnostics in .go files, specifically for diagnostics that deal with imported packages that are not declared in the go.mod file. These quick fixes will automatically add the dependency in the go.mod file and format the file if there are any issues.
Updates golang/go#31999
Change-Id: Iab151ce96194fae4b1995859aec416c5473da6e3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/215898
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Previously, the process of instantiating and running the LSP server was
sharded across the lsp, protocol, and cmd packages, and this resulted in
some APIs that are hard to work with. For example, it's hard to guess
the difference between lsp.NewClientServer, lsp.NewServer,
protocol.NewServer (which returns a client), and protocol.NewClient
(which returns a server).
This change reorganizes Server instantiation as follows:
+ The lsp.Server is now purely an implementation of the protocol.Server
interface. It is no longer responsible for installing itself into the
jsonrpc2 Stream, nor for running itself.
+ A new package 'lsprpc' is added, to implement the logic of binding an
incoming connection to an LSP server session. This is put in a
separate package for lack of a clear home: it didn't really
philosophically belong in any of the lsp, cmd, or protocol packages.
We can perhaps move it to cmd in the future, but I'd like to keep it
as a separate package while I develop request forwarding.
simplified import graph:
jsonrpc2 ⭠ lsprpc ⭠ cmd
⭩ ⭦
lsp (t.b.d. client tests)
⭩ ⭨
protocol source
+ The jsonrpc2 package is extended to have a minimal API for running a
'StreamServer': something analogous to an HTTP server that listens
for new connections and delegates to a handler (but we couldn't use
the word 'Handler' for this delegate as it was already taken).
After these changes, I hope that the concerns of "serving the LSP",
"serving jsonrpc2", and "installing the LSP on jsonrpc2" are more
logically organized, though one legitimate criticism is that the word
'Server' is still heavily overloaded.
This change prepares a subsequent change which hijacks the jsonrpc2
connection when forwarding messages to a shared gopls instance.
To test this change, the following improvements are made:
+ A servertest package is added to make it easier to run a test against
an in-process jsonrpc2 server. For now, this uses TCP but it could
easily be modified to use io.Pipe.
+ cmd tests are updated to use the servertest package. Unfortunately it
wasn't yet possible to eliminate the concept of `remote=internal` in
favor of just using multiple sessions, because view initialization
involves calling both `go env` and `packages.Load`, which slow down
session startup significantly. See also golang.org/issue/35968.
Instead, the syntax for `-remote=internal` is modified to be
`-remote=internal@127.0.0.1:12345`.
+ An additional test for request cancellation is added for the
sessionserver package. This test uncovered a bug: when calling
Canceller.Cancel, we were using id rather than &id, which resulted in
incorrect json serialization (as only the pointer receiver implements
the json.Marshaller interface).
Updates golang/go#34111
Change-Id: I75c219df634348cdf53a9e57839b98588311a9ef
Reviewed-on: https://go-review.googlesource.com/c/tools/+/215742
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Each of these files had a couple of functions that were very similar in
nature. There's no need to have separate files for all of these.
Change-Id: I4ca648d1b7e90539f274871d45b7c97a8111631f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218319
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
