While doing that, establish a negative value as signal for unknown
array lengths and adjust various array-length processing code to
handle that case.
Fixes#23712.
Change-Id: Icf488faaf972638b42b22d4b4607d1c512c8fc2c
Reviewed-on: https://go-review.googlesource.com/93438
Reviewed-by: Alan Donovan <adonovan@google.com>
The Netscape looping application extension encodes how many
times the animation should restart, and if it's present
there is no way to signal that a GIF should play only once.
Use LoopCount=-1 to signal when a decoded GIF had no looping
extension, and update the encoder to omit that extension
block when LoopCount=-1.
Fixes#15768
GitHub-Last-Rev: 249744f0e2
GitHub-Pull-Request: golang/go#23761
Change-Id: Ic915268505bf12bdad690b59148983a7d78d693b
Reviewed-on: https://go-review.googlesource.com/93076
Reviewed-by: Andrew Bonventre <andybons@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Andrew Bonventre <andybons@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Just return the result of the function call as they are
both functionally equivalent.
Change-Id: Ia7847c9b018475051bf6f7a7c532b515bd68c024
Reviewed-on: https://go-review.googlesource.com/90375
Run-TryBot: Andrew Bonventre <andybons@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Fixes#23732
Disambiguate "too few" or "too many" values in struct
initializer messages by reporting the name of the literal.
After:
issue23732.go:27:3: too few values in Foo literal
issue23732.go:34:12: too many values in Bar literal
issue23732.go:40:6: too few values in Foo literal
issue23732.go:40:12: too many values in Bar literal
Change-Id: Ieca37298441d907ac78ffe960c5ab55741a362ef
Reviewed-on: https://go-review.googlesource.com/93277
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Previously find_goroutine determined whether a goroutine is
stopped by checking the sched.sp field. This heuristic doesn't
always hold but causes find_goroutine to return bogus pc/sp
info for running goroutines.
This change uses the atomicstatus bit to determine
the state which is more accurate.
R=go1.11
Change-Id: I537d432d9e0363257120a196ce2ba52da2970f59
Reviewed-on: https://go-review.googlesource.com/49691
Reviewed-by: Austin Clements <austin@google.com>
Instead evaluate and read the runtime internal constants
defined in runtime2.go
R=go1.11
Change-Id: If2f4b87e5b3f62f0c0ff1e86a90db8e37a78abb6
Reviewed-on: https://go-review.googlesource.com/87877
Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com>
Reviewed-by: Austin Clements <austin@google.com>
and reorganize test log messages for stack dumps
for easier debugging.
The error log will be formatted like the following:
trace_stack_test.go:282: Did not match event GoCreate with stack
runtime/trace_test.TestTraceSymbolize :39
testing.tRunner :0
Seen 30 events of the type
Offset 1890
runtime/trace_test.TestTraceSymbolize /go/src/runtime/trace/trace_stack_test.go:30
testing.tRunner /go/src/testing/testing.go:777
Offset 1899
runtime/trace_test.TestTraceSymbolize /go/src/runtime/trace/trace_stack_test.go:30
testing.tRunner /go/src/testing/testing.go:777
...
Change-Id: I0468de04507d6ae38ba84d99d13f7bf592e8d115
Reviewed-on: https://go-review.googlesource.com/92916
Reviewed-by: Heschi Kreinick <heschi@google.com>
Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com>
Return an error if an Auth is passed to SendMail but the server does not support authentication.
Fixes#22145
Change-Id: I49a37259c47bbe5145e30fa8a2d05444e60cb378
Reviewed-on: https://go-review.googlesource.com/79776
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Change Reader to promote TypeRegA to TypeReg in headers, unless their
name have a trailing slash which is already promoted to TypeDir. This
will allow client code to handle just TypeReg instead both TypeReg and
TypeRegA.
Change Writer to promote TypeRegA to TypeReg or TypeDir in the headers
depending on whether the name has a trailing slash. This normalization
is motivated by the specification (in pax(1)):
0 represents a regular file. For backwards-compatibility, a
typeflag value of binary zero ( '\0' ) should be recognized as
meaning a regular file when extracting files from the
archive. Archives written with this version of the archive file
format create regular files with a typeflag value of the
ISO/IEC 646:1991 standard IRV '0'.
Fixes#22768.
Change-Id: I149ec55824580d446cdde5a0d7a0457ad7b03466
Reviewed-on: https://go-review.googlesource.com/85656
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
iana.org, www.iana.org and data.iana.org all present a valid TLS
certificate, so let's use it when fetching data or linking to
resources to avoid errors in transit.
Change-Id: Ib3ce7c19789c4e9d982a776b61d8380ddc63194d
Reviewed-on: https://go-review.googlesource.com/89416
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
I don't expect these to hit often, but we should still alert users if
we fail to write the correct data to the file, or fail to close it.
Change-Id: I33774e94108f7f18ed655ade8cca229b1993d4d2
Reviewed-on: https://go-review.googlesource.com/91456
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Now that the buffered write barrier is implemented for all
architectures, we can remove the old eager write barrier
implementation. This CL removes the implementation from the runtime,
support in the compiler for calling it, and updates some compiler
tests that relied on the old eager barrier support. It also makes sure
that all of the useful comments from the old write barrier
implementation still have a place to live.
Fixes#22460.
Updates #21640 since this fixes the layering concerns of the write
barrier (but not the other things in that issue).
Change-Id: I580f93c152e89607e0a72fe43370237ba97bae74
Reviewed-on: https://go-review.googlesource.com/92705
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Rick Hudson <rlh@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Calls to writebarrierptr can simply be actual pointer writes. Calls to
writebarrierptr_prewrite need to go through the write barrier buffer.
Updates #22460.
Change-Id: I92cee4da98c5baa499f1977563757c76f95bf0ca
Reviewed-on: https://go-review.googlesource.com/92704
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Rick Hudson <rlh@golang.org>
Because a call may ultimately invoke runtime.setg, we have to assume
that g may be clobbered by any call. All of the other architectures
that use a g register already do this, but it was missing from the
s390x caller save clobber set.
Change-Id: Ia931638d42c44979839f20d71097acf31475f423
Reviewed-on: https://go-review.googlesource.com/92835
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
R28 is used as the SB register on MIPS64, and it was printed as
"RSB" on both 32-bit and 64-bit MIPS. This is confusing on MIPS32
as there R28 is just a general purpose register. Further, this
string representation is used in the assembler's frontend to parse
register symbols, and this leads to failure in parsing R28 in
MIPS32 assembly code. Change rconv to always print the register
as R28. This fixes the parsing problem on MIPS32, and this is
a reasonable representation on both MIPS32 and MIPS64.
Change-Id: I30d6c0a442fbb08ea615f32f1763b5baadcee1da
Reviewed-on: https://go-review.googlesource.com/92915
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
On mips/mips64, for non-leaf function, RET is assembled as
MOV (SP), R4 // load saved LR
ADD $framesize, SP
JMP (R4)
This clobbers R4 unnecessarily. Use the link register as
temporary instead.
Probably for Go 1.11.
Change-Id: I2209db7be11074ed2e0e0829cace95ebfb709e9f
Reviewed-on: https://go-review.googlesource.com/79016
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Add the rawSyscallNoError wrapper function which is used for Linux
syscalls that don't return an error and convert all applicable
occurences of RawSyscall to use it instead.
Fixes#22924
Change-Id: Iff1eddb54573d459faa01471f10398b3d38528dd
Reviewed-on: https://go-review.googlesource.com/84485
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
All supported BSDs provide the SYS___GETCWD syscall which can be used to
implement syscall.Getwd. With this change os.Getwd can use a single
syscall instead of falling back to the current kludge solution on the
BSDs.
This doesn't add any new exported functions to the frozen syscall
package, only ImplementsGetwd changes to true for dragonfly, freebsd,
netbsd and openbsd.
As suggested by Ian, this follows CL 83755 which did the same for
golang.org/x/sys/unix.
Also, an entry for netbsd/arm is added to mkall.sh which was used to
generate the syscall wrappers there.
Change-Id: I84da1ec61a6b8625443699a63cde556b6442ad41
Reviewed-on: https://go-review.googlesource.com/84484
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The function was duplicated for Solaris. Reuse the BSD version instead.
Change-Id: Ibc812bcf36d21f4a7ceeef7b4fb091fa9479bfa8
Reviewed-on: https://go-review.googlesource.com/81395
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Adds a function that returns an OS-dependent location
for user-specific cache data.
Fixesgolang/go#22536
Change-Id: Ifff015452494571ad357fa2d945d66a5992c751d
Reviewed-on: https://go-review.googlesource.com/78835
Run-TryBot: Andrew Bonventre <andybons@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This file wasn't supposed to be checked in.
Change-Id: Ib0db0a330a3e030b0e6e5fde12088df5ac610ebc
Reviewed-on: https://go-review.googlesource.com/93555
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Andrew Bonventre <andybons@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Was missing a check in validSymbol.
Fixes#23580.
Can wait for go1.11. Probably safe but the crash is only for
invalid input, so not worth the risk.
Change-Id: I51f88c5be35a8880536147d1fe5c5dd6798c29de
Reviewed-on: https://go-review.googlesource.com/90398
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Inconsistent names are quite obvious on the godoc HTML rendering:
type Array
func NewArray(elem Type, len int64) *Array
func (a *Array) Elem() Type
func (a *Array) Len() int64
func (t *Array) String() string
func (t *Array) Underlying() Type
Fix all the String and Underlying methods to be consistent with their
types. This makes these two lists of methods less consistent, but that's
not visible to the user.
This also makes the inconsistent receiver names rule in golint happy.
Change-Id: I7c84d6bae1235887233a70d5f7f61a224106e952
Reviewed-on: https://go-review.googlesource.com/91736
Reviewed-by: Robert Griesemer <gri@golang.org>
R=go1.11.
Now that we have a syntax error test harness, we can add the
proper tests for the recent parser fixes.
For #20800.
For #20789.
For #23385.
For #23434.
A test for #20789 already exists in test/fixedbugs, but this
is the better location for that test. But leaving the existing
one where it is as well.
Change-Id: I5937b9b63bafd1efab467a00344302e717976171
Reviewed-on: https://go-review.googlesource.com/88336
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
R=go1.11
In order to collect comments in the AST and for error testing purposes,
the scanner needs to not only recognize and skip comments, but also be
able to report them if so desired. This change adds a mode flag to the
scanner's init function which controls the scanner behavior around
comments.
In the common case where comments are not needed, there must be no
significant overhead. Thus, comments are reported via a handler upcall
rather than being returned as a _Comment token (which the parser would
have to filter out with every scanner.next() call).
Because the handlers for error messages, directives, and comments all
look the same (they take a position and text), and because directives
look like comments, and errors never start with a '/', this change
simplifies the scanner's init call to only take one (error) handler
instead of 2 or 3 different handlers with identical signature. It is
trivial in the handler to determine if we have an error, directive,
or general comment.
Finally, because directives are comments, when reporting directives
the full comment text is returned now rather than just the directive
text. This simplifies the implementation and makes the scanner API
more regular. Furthermore, it provides important information about
the comment style used by a directive, which may matter eventually
when we fully implement /*line file:line:col*/ directives.
Change-Id: I2adbfcebecd615e4237ed3a832b6ceb9518bf09c
Reviewed-on: https://go-review.googlesource.com/88215
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
R=go1.11
A common error is to write '=' instead of '==' inside the condition
of a simple 'if' statement:
if x = 0 { ... }
Highlight the fact that we have an assignment in the error message
to prevent further confusion.
Fixes#23385.
Change-Id: I1552050fd6da927bd12a1be0977bd2e98eca5885
Reviewed-on: https://go-review.googlesource.com/87316
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
R=go1.11
This implements parsing of /*line file:line*/ and /*line file:line:col*/
directives and also extends the optional column format to regular //line
directives, per #22662.
For a line directive to be recognized, its comment text must start with
the prefix "line " which is followed by one of the following:
:line
:line:col
filename:line
filename:line:col
with at least one : present. The line and col values must be unsigned
decimal integers; everything before is considered part of the filename.
Valid line directives are:
//line :123
//line :123:8
//line foo.go:123
//line C:foo.go:123 (filename is "C:foo.go")
//line C:foo.go:123:8 (filename is "C:foo.go")
/*line ::123*/ (filename is ":")
No matter the comment format, at the moment all directives act as if
they were in //line comments, and column information is ignored.
To be addressed in subsequent CLs.
For #22662.
Change-Id: I1a2dc54bacc94bc6cdedc5229ee13278971f314e
Reviewed-on: https://go-review.googlesource.com/86037
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
R=go1.11
This is a follow up for #11377 which reported that an error like
/tmp/xx.go:9:6: expected '(', found 'IDENT' F1
shouldn't print 'IDENT', as it's just an internal detail.
The relevant change wasn't made in the original fix, so here it is.
For #11377.
Change-Id: Ib76957d86b88e3e63646fbe4abf03a3b9d045139
Reviewed-on: https://go-review.googlesource.com/87900
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
