Update the vendored x/tools to pick up CL 380014, which updates the
ifaceassert vet analyzer to remove spurious errors for assertions
involving interfaces with type parameters.
This also picks up some superficial changes related to refactoring of
the x/tools/internal/typeparams API.
The following commands were used:
go get -d golang.org/x/tools@master
go mod tidy
go mod vendor
Fixes#50658
Change-Id: I2f612fd186a1a260cab21860b192c9f6dc3f560f
Reviewed-on: https://go-review.googlesource.com/c/go/+/380777
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Tim King <taking@google.com>
For #50646.
Change-Id: I7420545556e0df2659836364a62ce2c32ad7a8b1
Reviewed-on: https://go-review.googlesource.com/c/go/+/380654
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Method signatures can introduce a significant number of edges into the
type graph. One can imagine a generic type with many methods, each of
which may use other instantiated types, etc. For performance, when type
checking generic code, we should avoid unnecessary instantiation of
methods wherever possible.
This CL achieves this by making method instantiation lazy at the
individual method level. It abstracts method access into a methodList
type, which may be either eager or lazy. In the lazy case, methods are
only instantiated when they are accessed via the Named.Method,
MethodSet, or LookupFieldOrMethod APIs. Factoring out a methodList type
makes it easier to verify that we're not leaking the methods slice
anywhere, and as a side benefit reduces the size of *Named types in the
case where there are no methods. The effective memory footprint of Named
types with methods increases by a pointer (to hold the slice of guards),
and the footprint of instantiated named types increases additionally by
a sync.Once per method. We estimate that this memory increase is more
than offset by the reduction in the number of instantiated methods.
This also simplifies the code. Previously we had to work around the fact
that named type expansion could occur before all signatures were set-up,
by stashing the instantiated receiver into a partially filled-out *Func.
With fully lazy methods, we can rely on the invariant that any use of
methods in valid code can only occur after all signatures can be type
checked. This means that we can fully instantiate the *Func, and don't
need to deal with partially instantiated stubs.
Finally, this CL fixes a bug (issue #50619), where traversing
Method->Receiver Type->Method did not get us back where we started. This
is fixed by not instantiating a new method if t is already the receiver
base of the original method.
A test is added to explicitly verify the invariant above, and more test
cases are added for the behavior of Info with respect to generic code.
Fixes#50619
Change-Id: I5b6d2bdc4404c9f5dcb583a29cb64e8af9794c54
Reviewed-on: https://go-review.googlesource.com/c/go/+/380499
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
We have disallowed having a typeparam on the right-hand-side of a type
declaration. So, we disabled much of the test absdiff.go. I recently
wrote a new test absdiff2.go to use a structure containing the type
param type, so I could attach a method properly and run the full test.
As a contrast, I thought I would create absdiff3.go, where the Abs
functionality is passed in as a function callback (but derived from a
generic function). This is simpler, and more inline with some of the
guidelines that Ian has been proposing (use passed-in functions rather
than requiring methods, when possible, for greater ease-of-use).
Only adds a new test absdiff3.go. (And fixes a comment in absdiff2.go.)
Change-Id: I6dd185b50a3baeec31f689a892319963468a7201
Reviewed-on: https://go-review.googlesource.com/c/go/+/380774
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Added a new absdiff2.go test case, which works fully without using a
typeparam on the right-hand-side of a type declaration (which is
disallowed). Fixed an issue that the test revealed, which is that we
need to set g.curDecl properly for the "later" functions which are
deferred until after all declarations are initially processed. Also,
g.curDecl may be non-nil in typeDecl for local type declaration. So, we
adjust the associate assertion, and save/restore g.curDecl
appropriately.
Fixes#50790
Change-Id: Ieed76a7ad0a83bccb99cbad4bf98a7bfafbcbbd3
Reviewed-on: https://go-review.googlesource.com/c/go/+/380594
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
While checking comparability of type parameters, we recurse through
_TypeSet.IsComparable, but do not pass the cycle-tracking seen map,
resulting in infinite recursion in some cases.
Refactor to pass the seen map through this recursion.
Fixes#50782
Change-Id: I2c2bcfed3398c11eb9aa0c871da59e348bfba5f7
Reviewed-on: https://go-review.googlesource.com/c/go/+/380504
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
By processing non-alias type declarations before alias type declaration,
and those before everything else we can avoid some of the remaining
errors which are due to alias types not being available.
For #25838.
For #50259.
For #50276.
For #50729.
Change-Id: I233da2899a6d4954c239638624dfa8c08662e6b9
Reviewed-on: https://go-review.googlesource.com/c/go/+/380056
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The type checker doesn't have a general mechanism to "use" the type
of a type alias whose type depends on a recursive type declaration
which is not yet completely type-checked. In some cases, the type of
a type alias is needed before it is determined; the type is incorrect
(invalid) in that case but no error is reported. The type-checker is
happy with this (incorrect type), but the compiler may crash under
some circumstances.
A correct fix will likely require some form of forwarding type which
is a fairly pervasive change and may also affect the type checker API.
This CL introduces a simple side table, a map of broken type aliases,
which is consulted before the type associated with a type alias is
used. If the type alias is broken, an error is reported.
This is a stop-gap solution that prevents the compiler from crashing.
The reported error refers to the corresponding issue which suggests
a work-around that may be applicable in some cases.
Also fix a minor error related to type cycles: If we have a cycle
that doesn't start with a type, don't use a compiler error message
that explicitly mentions "type".
Fixes#50259.
Fixes#50276.
Fixes#50779.
For #50729.
Change-Id: Ie8e38f49ef724e742e8e78625e6d4f3d4014a52c
Reviewed-on: https://go-review.googlesource.com/c/go/+/379916
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
In validType, when we see an instantiated type, proceed as with
non-generic types but provide an environment in which to look up
the values (the corresponding type arguments) of type parameters
of the instantiated type. For each type parameter for which there
is a type argument, proceed with validating that type argument.
This corresponds to applying validType to the instantiated type
without actually instantiating the type (and running into infinite
instantiations in case of invalid recursive types).
Also, when creating a type instance, use the correct source position
for the instance (the start of the qualified identifier if we have an
imported type).
Fixes#48962.
Change-Id: I196c78bf066e4a56284d53368b2eb71bd8d8a780
Reviewed-on: https://go-review.googlesource.com/c/go/+/379414
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This is necessary for cycle detection over imported types whose
underlying types are set by importers with SetUnderlying.
Preparation for fixing issue #48962.
Change-Id: I3218cda7feb06440fdb8345c94bcaa5f7d64e94e
Reviewed-on: https://go-review.googlesource.com/c/go/+/379694
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Because validType doesn't modify global state anymore, there's
no need to ignore imported types. When we start tracking type
parameters, we need to include imported types because they may
contribute to cycles that invalidate a type.
This CL effectively reverts CL 202483 (issue #35049, which
doesn't apply anymore because we don't change the state of
imported objects).
Preparation for fixing issue #48962.
For #35049.
For #48962.
Change-Id: I06f15575ad197375c74ffd09c222250610186b15
Reviewed-on: https://go-review.googlesource.com/c/go/+/378675
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Now that we have a separate top-level entry point for validType
we can use the more narrow type *Named (instead of Type) for its
argument.
Preparation for fixing issue #48962.
Change-Id: I93aee4abc87036c6a68323dc970efe8e617a9103
Reviewed-on: https://go-review.googlesource.com/c/go/+/379434
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
With this change validType doesn't modify global state anymore.
It also eliminates the need for an extra field in each object.
Preparation for fixing issue #48962.
Change-Id: If241ec77ff48911d5b43d89adabfb8ef54452c6b
Reviewed-on: https://go-review.googlesource.com/c/go/+/378176
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The validType check is independent of the work of declaring objects.
Move it into a separate file for better separation of concerns and
code organization.
No other changes - this is purely a code move.
Preparation for fixing issue #48962.
Change-Id: Ib08db2d009c4890882d0978b278e965ca3078851
Reviewed-on: https://go-review.googlesource.com/c/go/+/378674
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
TestFutexsleep was originally created in CL 7876043 as a
regression test for buggy division logic in futexsleep. Several months
later CL 11575044 moved this logic to timediv (called by futexsleep).
This test calls runtime.Futexsleep, which temporarily disables
asynchronous preemption. Unfortunately, TestFutexSleep calls this from
multiple goroutines, creating a race condition that may result in
asynchronous preemption remaining disabled for the remainder of the
process lifetime.
We could fix this by moving the async preemption disable to the main
test function, however this test has had a history of flakiness. As an
alternative, this CL replaces the test wholesale with a new test for
timediv, covering the overflow logic without the difficulty of dealing
with futex.
Fixes#50749.
Change-Id: If9e1dac63ef1535adb49f9a9ffcaff99b9135895
Reviewed-on: https://go-review.googlesource.com/c/go/+/380058
Trust: Michael Pratt <mpratt@google.com>
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Given we have support for field access to type params with a single
structural type, we need to distinguish between methods calls and field
access when we have an OXDOT node on an expression which is a typeparam
(or correspondingly a shape). We were missing checks in getInstInfo,
which figures out the dictionary format, which then caused problems when
we generate the dictionaries. We don't need/want dictionary entries for
field access, only for bound method calls. Added a new function
isBoundMethod() to distinguish OXDOT nodes which are bound calls vs.
field accesses on a shape.
Removed isShapeDeref() - we can't have field access or method call on a
pointer to variable of type param type.
Fixes#50690
Change-Id: Id692f65e6f427f28cd2cfe474dd30e53c71877a7
Reviewed-on: https://go-review.googlesource.com/c/go/+/379674
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Add some useful comments, mainly relates to types.Type. (No non-comment
changes.)
Change-Id: I3665ed69b180c4e790af2f9243f65c805083391a
Reviewed-on: https://go-review.googlesource.com/c/go/+/379918
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
Very, very rarely TestVectoredHandlerDontCrashOnLibrary fails because
the C subprocess exits with a 0 status code and no output. This
appears to happen because C does not actually guarantee that stdout
will be flushed on exit and somehow, very rarely, it is not flushed.
Add explicit fflushes to fix this. This reduces the failure rate of
TestVectoredHandlerDontCrashOnLibrary from 0.0013% to 0% in 250,000
iterations.
Fixes#49959.
Change-Id: I892cf49a165ac91134c5da37588a2ab11e1f3f8b
Reviewed-on: https://go-review.googlesource.com/c/go/+/380494
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
Mostly from CL 367954.
Change-Id: Id003b0f785a286a1a649e4d6e8c87d0418a36545
Reviewed-on: https://go-review.googlesource.com/c/go/+/379920
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This fixes checks for crossing module boundaries when the root of
the module is a symlink. We're comparing paths by string, so we need
to follow the symlink to get the proper path to compare.
Change-Id: Idf5f0dd5c49bcae5fffb5372e99a7fab89169a9d
Reviewed-on: https://go-review.googlesource.com/c/go/+/380057
Trust: Michael Matloob <matloob@golang.org>
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
The closure in parallelLabelHog should be labeled in a addition to
parallelLabelHog itself. Generally samples on that goroutine land on
labelHog, but there is a small portion of the closure outside of
labelHog.
Fixes#50740.
Change-Id: I363b6d8eec2e6920c215686e2039fce6d5b29a98
Reviewed-on: https://go-review.googlesource.com/c/go/+/380055
Reviewed-by: Bryan Mills <bcmills@google.com>
Trust: Michael Pratt <mpratt@google.com>
This reverts CL 376414.
For #47694.
For #50481.
Change-Id: Ie73961046e52e6e5d3262ef0aeaa24bec7eaa937
Reviewed-on: https://go-review.googlesource.com/c/go/+/379835
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In a method declaration "func (f *Foo[_, _]) String() string { ... }",
the two blank typeparams have the same name, but our current design with
types1 needs unique names for type params. Similarly, for export/import,
we need unique names to keep the type params straight in generic types
and connect the proper type param with the proper constraint. We make
blank type params unique by changing them to $1, $2, etc in noder.typ0()
via typecheck.TparamExportName(). We then revert $<num> back to _ during
type2 import via typecheck.TparamName(). We similarly revert
during gcimporter import. We don't need/want to revert in the types1
importer, since we want unique names for type params.
Rob Findley has made a similar change to x/tools (and we tried to make
the source code changes similar for the gcimporter and types2 importer
changes).
Fixes#50419
Change-Id: I855cc3d90d06bcf59541ed0c879e9a0e4ede45bb
Reviewed-on: https://go-review.googlesource.com/c/go/+/379194
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Use an enviroment variable rather than a build tag to control starting
a busy loop thread when testprogcgo starts. This lets us skip another
build that invokes the C compiler and linker, which should avoid
timeouts running the runtime tests.
Fixes#44422
Change-Id: I516668d71a373da311d844990236566ff63e6d72
Reviewed-on: https://go-review.googlesource.com/c/go/+/379294
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
And disallow replaces of any main modules in the go.work file itself.
Change-Id: Ifa9ba9eaed047e6a75fcde230d96c7c450c1a1ad
Reviewed-on: https://go-review.googlesource.com/c/go/+/379534
Trust: Michael Matloob <matloob@golang.org>
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Now that we instantiate methods on instantiated types, there is no need
to use unification to match signatures inside of missingMethod.
Generally, we should never encounter uninstantiated signatures within
statements. If we do encounter signatures that contain type parameters,
it is because the signatures are themselves defined or instantiated
using type parameters declared in the function scope (see example
below). The current unification logic would not handle this.
type S[T any] struct{}
func (S[T]) m(T)
func _[P any]() bool {
var v interface{m(int)}
_, ok = v.(S[P])
return ok
}
Change-Id: I754fb5535bba2fc7a209dc7419fd4015c413c9a6
Reviewed-on: https://go-review.googlesource.com/c/go/+/379540
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
This is a map from identifiers to type parameters, use *TypeParam
as map value instead of Type.
Change-Id: Ib006393418c6352bcffc1c6796c5e002c33d9f4e
Reviewed-on: https://go-review.googlesource.com/c/go/+/379634
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Most CONVIFACEs are created in the transform phase (or old typechecker,
in -G=0 mode). But if the main result of a multi-value assignment (map,
channel, or dot-type) must be converted to an interface during the
assignment, that CONVIFACE is not created until (*orderState).as2ok in
the order phase (because the AS2* ops and their sub-ops are so tightly
intertwined). But we need to create the CONVIFACE during the
stenciling/transform phase to enable dictionary lookups. So, in
transformAssign(), if we are doing a special multi-value assignment
involving a type-param-derived type, assign the results first to temps,
so that we can manifest the CONVIFACE during the transform in assigning
the first temp to lhs[0].
Added a test for both AS2RECV (channel receives) and AS2MAPR (maps). I
don't think we can have a type assertion on a type-param-derived type.
Fixes#50642
Change-Id: I4d079fc46c93d8494d7db4ea8234d91522edb02a
Reviewed-on: https://go-review.googlesource.com/c/go/+/379054
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Slightly better for cases such as string(1 << s).
Leaves type-checker tests alone for now because
there are multiple dozens.
For #45117.
Change-Id: I47b314c713fabe424c2158674bf965416a8a6f5c
Reviewed-on: https://go-review.googlesource.com/c/go/+/379274
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
It was removed in CL 378576.
For #50501
Change-Id: I26b8f0e99a40fa5c616aa4849a6ab15dd0d072f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/379314
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
TestCPUProfileMultithreadMagnitude compares pprof results vs OS rusage
to verify that pprof is capturing all CPU usage. Presently it compares
the sum of cpuHog1 samples vs rusage. However, background usage from the
scheduler, GC, etc can cause additional CPU usage causing test failures
if rusage is too far off from the cpuHog1 samples.
That said, this test doesn't actually need to care about cpuHog1
samples. It simply cares that pprof samples match rusage, not what the
breakdown of usage was. As a result, we can compare the sum of _all_
pprof samples vs rusage, which should implicitly include any background
CPU usage.
Fixes#50097.
Change-Id: I649a18de5b3dcf58b62be5962fa508d14cd4dc79
Reviewed-on: https://go-review.googlesource.com/c/go/+/379535
Trust: Michael Pratt <mpratt@google.com>
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Document and enforce API expectation. Add a test so we don't
inadvertently change the function behavior with respect to nil
type arguments.
Fixes#50620.
Change-Id: Ic000bff7504a03006bd248a319c7a2d49dcf09c8
Reviewed-on: https://go-review.googlesource.com/c/go/+/379374
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This makes TestLabelSystemstack much more strict, enabling it to detect
any misplacement of labels.
Unfortunately, there are several edge cases where we may not have an
obviously correct stack trace, so we generally except the runtime
package, with the exception of background goroutines that we know should
not be labeled.
For #50007
For #50032
Change-Id: I8dce7e7da04f278ce297422227901efe52782ca0
Reviewed-on: https://go-review.googlesource.com/c/go/+/369984
Trust: Michael Pratt <mpratt@google.com>
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
GC background mark worker goroutines are created when the first GC is
triggered (or next GC after GOMAXPROCS increases). Since the GC can be
triggered from a user goroutine, those workers will inherit any pprof
labels from the user goroutine.
That isn't meaningful, so avoid it by excluding system goroutines from
inheriting labels.
Fixes#50032
Change-Id: Ib425ae561a3466007ff5deec86b9c51829ab5507
Reviewed-on: https://go-review.googlesource.com/c/go/+/369983
Reviewed-by: Austin Clements <austin@google.com>
Trust: Michael Pratt <mpratt@google.com>
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Instead, allow the test to run up until nearly the test's deadline,
whatever that may be, and then crash with a panic (instead of calling
t.Errorf) to get a useful goroutine dump.
With the arbitrary timeout removed, we can now also run this test in
short mode, reducing its impact on test latency.
Fixes#19381
Change-Id: Ie1fae321a2973fcb9b69a012103363f16214f529
Reviewed-on: https://go-review.googlesource.com/c/go/+/378034
Trust: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
For an extension operation like MOWWreg, if the operand is already
extended, we optimize the second extension out. Usually a LoadReg
of a proper type would come already extended, as a MOVW/MOVWU etc.
instruction does. But for a LoadReg to a floating point register,
the instruction does not do the extension. So we cannot elide the
extension.
Fixes#50671.
Change-Id: Id8991df78d5acdecd3fd6138c558428cbd5f6ba3
Reviewed-on: https://go-review.googlesource.com/c/go/+/379236
Trust: Cherry Mui <cherryyz@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This test occasionally takes very slightly longer than the 3 second
timeout on slow builders (especially windows-386-2008), so increase
the timeout to 5 seconds. It fails with much longer timeouts on Plan
9, so skip it as flaky there.
Updates #41015.
Change-Id: I426a7adfae92c18a0f8a223dd92762b0b91565e1
Reviewed-on: https://go-review.googlesource.com/c/go/+/379214
Trust: Austin Clements <austin@google.com>
Reviewed-by: Cherry Mui <cherryyz@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
This test was missed in CL 358539, presumably because the 'longtest'
builders lack a 'gpg' executable.
Updates #49168Fixes#50675
Change-Id: Ie3bfc761a5e4304531119625742f3def9df8af3f
Reviewed-on: https://go-review.googlesource.com/c/go/+/378575
Trust: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently the code handles the case of returning values from
a function with no result parameters as a special case.
Consider this input:
package p
func f0_2() { return 1, 2 }
func f0_1() { return 1 }
func f1_0() int { return }
func f1_2() int { return 1, 2 }
func f2_0() (int, int) { return }
func f2_1() (int, int) { return 1 }
The errors are:
x.go:3:33: no result values expected <<<
x.go:4:33: no result values expected <<<
x.go:5:26: not enough return values
have ()
want (int)
x.go:6:36: too many return values
have (number, number)
want (int)
x.go:7:26: not enough return values
have ()
want (int, int)
x.go:8:33: not enough return values
have (number)
want (int, int)
There are two problems with the current special case emitting the
errors on the marked line:
1. It calls them 'result values' instead of 'return values'.
2. It doesn't show the type being returned, which can be useful to programmers.
Using the general case solves both these problems,
so this CL removes the special case and calls the general case instead.
Now those two errors read:
x.go:3:33: too many return values
have (number, number)
want ()
x.go:4:33: too many return values
have (number)
want ()
Fixes#50653.
Change-Id: If6b47dcece14ed4febb3a2d3d78270d5be1cb24d
Reviewed-on: https://go-review.googlesource.com/c/go/+/379116
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
