snapshot.View().Session().Cache().FileSet() has been driving me crazy
for a while. Add it to snapshot. Along the way, discover that the Cache
interface is now totally unused and delete it.
I also changed a bunch of View arguments to Snapshot while I was in the
area.
Change-Id: I1064d0020b1567c2ed28d2d55e0f4649eb94c060
Reviewed-on: https://go-review.googlesource.com/c/tools/+/245324
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Just like ParseGoHandle, PackageHandle isn't very useful as part of the
public API. Remove it.
Having PackagesForFile take a URI rather than a FileHandle seems
reasonable, and made me wonder if that logic applies to other calls like
ParseGo. For now I'm going to stop here. I could also revert that part
of the change.
Change-Id: Idba8e9fdba0b0c48e841a698eb97e47fd5f23cf5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244637
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
ParseGoHandles serve two purposes: they pin cache entries so that
redundant calculations are cached, and they allow users to obtain the
actual parsed AST. The former is an implementation detail, and the
latter turns out to just be an annoyance.
Parsed Go files are obtained from two places. By far the most common is
from a type checked package. But a type checked package must by
definition have already parsed all the files it contains, so the PGH
is already computed and cannot have failed. Type checked packages can
simply return the parsed file without requiring a separate Check
operation. We do want to pin the cache entries in this case, which I've
done by holding on to the PGH in cache.pkg.
There are some cases where we directly parse a file, such as for the
FoldingRange LSP call, which doesn't need type information. Those parses
can actually fail, so we do need an error check. But we don't need the
PGH; in all cases we are immediately using and discarding it.
So it turns out we don't actually need the PGH type at all, at least not
in the public API. Instead, we can pass around a concrete struct that
has the various pieces of data directly available.
This uncovered a bug in typeCheck: it should fail if it encounters any
real errors.
Change-Id: I203bf2dd79d5d65c01392d69c2cf4f7744fde7fc
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244021
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Due to the runtime's inability to collect cycles involving finalizers,
we can't close over handles in memoize.Functions without causing memory
leaks. Up until now we've dealt with that by closing over all the bits
of the snapshot that we want, but it distorts the design of all the code
used in the Functions.
We can solve the problem another way: instead of closing over the
snapshot/view, we can force the caller to pass it in. This is somewhat
scary: there is no requirement that the argument matches the data that
we're working with. But the reality is that this is not a new problem:
the Function used to calculate a cache value is not necessarily the one
that the caller expects. As long as the cache key fully identifies all
the inputs to the Function, the output should be correct. And since the
caller used the snapshot/view to calculate that cache key, it should
always be safe to pass in that snapshot/view. If it's not, then we
already had a bug.
The Arg type in memoize is clumsy, but I thought it would be nice to
have at least a little bit of type safety. I'm open to suggestions.
Change-Id: I23f546638b0c66a4698620a986949087211f4762
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244019
Reviewed-by: Robert Findley <rfindley@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The logic for extracting a function is quite signficant, and the code
is expensive enough that we should only call it when requested by the
user. This means that we should support extracting through a command
rather than text edits in the code action.
To that end, we create a new struct for commands. Features like extract
variable and extract function can supply functions to determine if they
are relevant to the given range, and if so, to generate their text
edits. source.Analyzers now point to Commands, rather than
SuggestedFixFuncs. The "canExtractVariable" and "canExtractFunction"
functions still need improvements, but I think that can be done in a
follow-up.
Change-Id: I9ec894c5abdbb28505a0f84ad7c76aa50977827a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/244598
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Our approach to commands and their arguments has been ad-hoc until this
point. This CL creates a standard way of defining and passing the
arguments to different commands. The arguments to a command are now
json.RawMessages, so that we don't have to double encode. This also
allows us to check the expected number of arguments without defining
a struct for every command.
Change-Id: Ic765c9b059e8ec3e1985046d13bf321be21f16ab
Reviewed-on: https://go-review.googlesource.com/c/tools/+/242697
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Completion could be slow due to calls to astutil.PathEnclosingInterval
for every candidate during formatting. There were two reasons we
called PEI:
1. To properly render type alias names, we must refer to the AST
because the alias name is not available in the typed world.
Previously we would call PEI to find the *type.Var's
corresponding *ast.Field, but now we have a PosToField cache that
lets us jump straight from the types.Object's token.Pos to the
corresponding *ast.Field.
2. To display an object's documentation we must refer to the AST. We
need the object's declaring node and any containing ast.Decl. We
now maintain a special PosToDecl cache so we can avoid the PEI call
in this case as well.
We can't use a single cache for both because the *ast.Field's position
is present in both caches (but points to different nodes). The caches
are memoized to defer generation until they are needed and to save
work creating them if the *ast.Files haven't changed.
These changes speed up completing the fields of
github.com/aws/aws-sdk-go/service/ec2 from 18.5s to 45ms on my laptop.
Fixesgolang/go#37450.
Change-Id: I25cc5ea39551db728a2348f346342ebebeddd049
Reviewed-on: https://go-review.googlesource.com/c/tools/+/221021
Run-TryBot: Muir Manders <muir@mnd.rs>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Ignore ignored the builtin package and files that start with _. The
latter should already be ignored by "go list". The former seems
like too much effort to me. People shouldn't edit random parts of the
stdlib, and ignoring changes to (e.g.) the Error interface seems like
the least of the trouble they can get themselves into.
Remove it for now. If we get complains I'll re-add it, probably by
rejecting the write entirely somewhere.
We incidentally relied on this in the identifier functions; change those
to treat the builtin package slightly more specially.
Change-Id: I005b02a66b1a987c50a3074d53a2d28ff07d3324
Reviewed-on: https://go-review.googlesource.com/c/tools/+/237597
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We use file identities pervasively throughout gopls. Prior to this
change, the identity is the modification date of an unopened file, or
the hash of an opened file. That means that opening a file changes its
identity, which causes unnecessary churn in the cache.
Unfortunately, there isn't an easy way to fix this. Changing the
cache key to something else, such as the modification time, means that
we won't unify cache entries if a change is made and then undone. The
approach here is to read files eagerly in GetFile, so that we know their
hashes immediately. That resolves the churn, but means that we do a ton
of file IO at startup.
Incidental changes:
Remove the FileSystem interface; there was only one implementation and
it added a fair amount of cruft. We have many other places that assume
os.Stat and such work.
Add direct accessors to FileHandle for URI, Kind, and Version. Most uses
of (FileHandle).Identity were for stuff that we derive solely from the
URI, and this helped me disentangle them. It is a *ton* of churn,
though. I can revert it if you want.
Change-Id: Ia2133bc527f71daf81c9d674951726a232ca5bc9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/237037
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The code for formatting function signatures is fairly confusing.
Factoring out an unexported signature type simplifies things a bit.
Hopefully we'll be able to pull out more formatting logic from the other
features. Ideally, I'd like to return to the separation between
internal/lsp/source and internal/lsp so that a formatting package can be
pulled out and used in internal/lsp.
Change-Id: I7428db5004eab371e46402188e0dc6bb30f0c425
Reviewed-on: https://go-review.googlesource.com/c/tools/+/229318
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change is the first step in handling golang/go#38136. Instead of
creating multiple diagnostic reports for type error analyzers, we add
suggested fixes to the existing reports. To match the analyzers for
FindAnalysisError, we add an ErrorMatch function to source.Analyzer.
This is not an ideal solution, but it was the best one I could come up
with without modifying the go/analysis API. analysisinternal could be
used for this purpose, but it seemed to complicated to be worth it, and
this is fairly simple. I think that go/analysis itself might need to be
extended for type error analyzers, but these temporary measures will
help us understand the kinds of features we need for type error
analyzers.
A follow-up CL might be to not add reports for type error analyzers
until the end of source.Diagnostic, which would remove the need for the
look-up.
Fixesgolang/go#38136
Change-Id: I25bc6396b09d49facecd918bf5591d2d5bdf1b3a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/226777
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change ports the functionality of https://github.com/sqs/goreturns
to be used as code actions on diagnostics that have missing
return values. It improves on the original goreturns functionality by:
- filling out empty return statements
- trying to match existing return values to the required return
values and then filling in missing parameters
Fixesgolang/go#37091
Change-Id: Ifaf9bf571c3bc3c61e672b0a2f725d8d734d432d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/224960
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change uses the new unusedparams analyzer to remove any unused parameters from functions inside of internal/lsp/source :)
Change-Id: I220100e832971b07cd80a701cd8b293fe708af3d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/225997
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
In support of https://golang.org/cl/224960, add utility functions that
create zero value expressions for a given types.Type. There are probably
some bugs here but they pass the basic tests in that CL.
Known problems: it skips through type aliases, and can't handle
anonymous structs/interfaces. Hopefully it's pretty unusual to return
those.
Change-Id: I69a388d9ce9bd60bc230e4a3d2b30f581ec25698
Reviewed-on: https://go-review.googlesource.com/c/tools/+/225177
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rohan Challa <rohan@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
When searching for deep completions, we can end up enumerating struct
types' fields a lot. Optimize fieldSelections to reduce work:
- Wait until we see an embedded field before we create the "seen"
map.
- Use a callback style to iterate over the struct's fields rather than
returning a slice of fields.
- Change "seen" checking strategy back to track struct types rather
than each individual field.
Struct with 5 non-embedded fields:
name old time/op new time/op delta
Fields-16 293ns ± 1% 20ns ± 2% -93.13% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
Fields-16 120B ± 0% 0B -100.00% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
Fields-16 4.00 ± 0% 0.00 -100.00% (p=0.008 n=5+5)
Same struct but add an embedded struct with 2 fields:
name old time/op new time/op delta
Fields-16 389ns ± 1% 142ns ± 1% -63.53% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
Fields-16 120B ± 0% 144B ± 0% +20.00% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
Fields-16 4.00 ± 0% 2.00 ± 0% -50.00% (p=0.008 n=5+5)
I think the alloc/op went up because the "seen" map is no longer
allocated on the stack. There is more room for more optimization, but
it's probably not worth making things more complicated.
Change-Id: I6f9f2124334a8594ef9d6f9b5ac4b3a8aead5f49
Reviewed-on: https://go-review.googlesource.com/c/tools/+/223419
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Now we offer an error-check-and-return completion candidate when
appropriate:
func myFunc() (int, error) {
f, err := os.Open("foo")
<>
}
offers the candidate:
if err != nil {
return 0, <err>
}
where <> denotes a placeholder so you can easily alter "err".
The completion will only be offered when:
1. The position is in a function that returns an error as final result
value, and
2. The statement preceding position is an assignment whose final LHS
value is an error.
The completion will contain zero values for the non-error return values
as necessary.
Using the above example, the completion will be offered after the user
has typed:
i
if
if err
Basically the candidate will be offered after every keystroke as the
user types "if err".
I call this new type of completion a statement completion - perfect
for when you want to make a statement!
Change-Id: I0a330e1c1fa81a2757d3afc84c24e853f46f26b0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/221613
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The code to check if a candidate object matches our candidate
inference had become complicated, messy, and in some cases incorrect.
The main source of the complexity is the "derived" expected and
candidate types. When considering a candidate object "foo", we also
consider "&foo", "foo()", and "*foo", as appropriate. On the expected
side of things, when completing the a variadic function parameter we
expect either the variadic slice type and the scalar element type.
The code had grown organically to handle the expanding concerns, but
that resulted in confused code that didn't handle the interplay
between the various facets of candidate inference.
For example, we were inappropriately invoking func candidates when
completing variadic args:
func foo(...func())
func bar() {}
foo(bar<>) // oops - expanded to "bar()"
and we weren't type matching functions properly as builtin args:
func myMap() map[string]int { ... }
delete(myM<>) // we weren't preferring (or invoking) "myMap()"
We also had methods like "typeMatches" which took both a "candidate"
object and a "candType" type, which doesn't make sense because the
candidate contains the type already.
Now instead we explicitly iterate over all the derived candidate and
expected types so they are treated the same. There are still some
warts left but I think this is a step in the right direction.
Change-Id: If84a84b34a8fb771a32231f7ab64ca192f611b3d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218877
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Add support for var/func/const/type/import keywords at the file scope.
I left out "package" because, currently, if you are completing
something that means you must already have a package declaration. The
main hurdle was that anything other than a decl keyword shows up as
an *ast.BadDecl at the file scope. To properly detect the prefix we
manually scan for the token containing the position.
I also made a couple small drive-by improvements:
- Also suggest "goto" and "type" keywords in functions.
- Allow completing directly before a comment, e.g. "foo<>//". I
needed this for a test that would have been annoying to write
otherwise.
Updates golang/go#34009.
Change-Id: I290e7bdda9e66a16f996cdc291985a54bf375231
Reviewed-on: https://go-review.googlesource.com/c/tools/+/217500
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Create a real type for protocol.DocumentURIs. Remove span.NewURI in
favor of path/URI-specific constructors. Remove span.Parse's ability to
parse URI-based spans, which appears to be totally unused.
As a consequence, we no longer mangle non-file URIs to start with
file://, and crash all over the place when one is opened.
Updates golang/go#33699.
Change-Id: Ic7347c9768e38002b4ad9c84471329d0af7d2e05
Reviewed-on: https://go-review.googlesource.com/c/tools/+/219482
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Currently there is no need for this because the file contents are part
of the file handle. This change is in preparation for an impending
improvement that tweaks the source code during the parse stage to fix
certain kind of terminal parse errors. Any code that wants to use
an *ast.File or *token.File in conjunction with the file contents
needs access to the doctored source code so things line up.
Change-Id: I59d83d3d6150aa1264761aa2c1f6c1269075a2ce
Reviewed-on: https://go-review.googlesource.com/c/tools/+/218979
Run-TryBot: Muir Manders <muir@mnd.rs>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Now when we expect a type name at the cursor, we omit non-type name
completion candidates. For example:
inch := 1
var foo in<> // don't offer "inch"
I also added expected type name detection for value specs:
// Expect a type name at <>
var foo <>
Fixesgolang/go#32806.
Change-Id: I32477cb286d2050bac5ccc767f8a608124fa5acd
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216400
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
The go/packages workaround to hide errors for overlay packages doesn't
seem to work well. It's easier to just hide list errors in gopls
diagnostics unless the package genuinely failed to type-check. Check if
the package has missing dependencies as an approximation of if it is
well-typed.
This required some additional special casing for the import cycle error
detection, which now causes them to have duplicate diagnostics. It's a
rare enough case that this doesn't concern me, but we should clean this
up at some point.
Fixesgolang/go#36754.
Change-Id: If12c92fb9a0e0b69b711ae9a509ecb1b2a32255c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216310
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
I had originally thought I might be able to use exprAtPos for this,
which is why I ended up eliminating that function when I saw it only had
one use.
One test also had to change in order to fit better with the spec.
Specifically: "If [the active parameter is] omitted or the value
lies outside the range of `signatures[activeSignature].parameters`
it defaults to 0 if the active signature has parameters."
Fixesgolang/go#36766.
Change-Id: I400d5b2db2985bfaa5efbcd91225151ca8b5f46a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/216309
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
typeIsValid() intended to stop on a named type, but
since we called Underlying(), switch case never caught any
named type. To avoid that, do an early check.
Fixesgolang/go#36637
Change-Id: I2700afbb8f9678b4542e2e7dccc3be59b1d9ebdf
Reviewed-on: https://go-review.googlesource.com/c/tools/+/215238
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Any file could have //line directives in it, which means that we should
never trust a mapper that was looked up for a whole file. Remove the
range conversion helpers that accepted a mapper and look it up on the
spot.
Change-Id: Ic518891fcc1a682b31cbc6d1d4e1e1af1ef21962
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214949
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change moves to our ultimate approach of diagnostics the snapshot
on every file change, instead of carefully picking which files and
packages to diagnose. Analyses are shown for packages whose files are
open in the editor. Reverse dependencies are no longer needed for
source.Diagnostics because they will be invalidated when the snapshot is
cloned, so diagnosing the entire snapshot will bring them up to date.
This even works for go.mod files because all of workspace-level `go list`s
will be canceled as the user types, and then we trigger an uncancellable
go/packages.Load when the user saves. There is still room for improvement
here, but it will require much more careful invalidation of metadata for
go.mod files.
Change-Id: Id068505634b5e701c6f861a61b09a4c6704c565f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214419
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
In golang.org/cl/209419, CheckPackageHandle was renamed to
PackageHandle, but a number of references to CheckPackageHandle remained
in function names and comments.
This CL cleans up most of these, though there was at least one case
(internal/lsp/cache.checkPackageKey) where the obvious renaming
conflicted with another function, so I skipped it.
Change-Id: I517324279ff05bd5b1cab4eeb212a0090ca3e3ad
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214800
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
There is no reason for these functions to live on the view. They make
more sense as unexported functions in internal/lsp/source.
Initially, I had to propagate contexts through a lot of functions in
internal/lsp/source, but instead I removed the unused contexts forom
snapshot.GetFile.
Change-Id: I8323419d0356feb2010091fe8d3ed35e511f801a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/214384
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
We now support taking the address of objects to make better completion
candidates. For example:
i := 123
var p *int = <> // now you get a candidate for "&i"
This required that we track addressability better, particularly when
searching for deep candidates. Now each candidate knows if it is
addressable, and the deep search propagates addressability to child
candidates appropriately.
The basic propagation logic is:
- In-scope *types.Var candidates are addressable. This handles your
basic "foo" variable whose address if "&foo".
- Surrounding selector is addressable based on type checker info. This
knows "foo.bar.<>" is addressable but "foo.bar().<>" isn't
- When evaluating deep completions, fields after a function call lose
addressability, but fields after a pointer regain addressability. For
example, "foo.bar()" isn't addressable, but "foo.bar().baz" is
addressable if "bar()" returns a pointer.
Fixesgolang/go#36132.
Change-Id: I6a8659eb8c203262aedf86844ac39a2d1e81ecc4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212399
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
If the enclosing value spec specifies a type on the LHS, we now prefer
completions of that type on the RHS. For example:
i := 123
var foo int = // prefer "i" since we know we want an int
I also added a special case to lexical() to know that we can't offer
objects defined on the LHS as completions on the RHS. For example:
var foo int = // don't offer "foo" as completion
Change-Id: I8e24245a2bc86a29887360e7f642a4cbb87fa6ca
Reviewed-on: https://go-review.googlesource.com/c/tools/+/212401
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change eliminates the extra step of calling GetFile on the view and
getting the FileHandle from the snapshot. It also eliminiates the
redundant source.File type. Follow up changes will clean up the file
kind handling, since it still exists on the fileBase type.
Change-Id: I635ab8632821b36e062be5151eaab425a5698f60
Reviewed-on: https://go-review.googlesource.com/c/tools/+/211778
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change refactors some of the logic that builds a link anchor for
a given symbol, pushing the actual Link into the HoverInformation struct.
This is necessary because type information is needed to build up that
link in certain cases, like methods.
The last step will be to correctly display struct fields.
Updates golang/go#34240Fixesgolang/go#36031
Change-Id: I7f989faddbaa07f91838a870b4477bf78ce8ddf7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210201
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Cache delivered diagnostics on the server so that we can determine if
they should be resent. To be careful about this, we only reuse cached
diagnostics if they are for a greater version, or if we don't know
the file's version and it is unchanged.
Fixesgolang/go#32443
Change-Id: I4ba22d85e5b21a8ad6cc62f74cd83c07d3c220cf
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208261
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
We previously searched the reverse dependencies of the "widest"
package that contained out starting identifier, but if our package has
tests then the widest package is the ".test" variant, and it has no
reverse dependencies. Fix by searching through all of the packages
that contain our starting identifier.
For example:
-- foo/foo.go --
package foo
func Foo() {}
-- foo/foo_test.go --
package foo
func TestFoo(t *testing.T) {}
-- bar/bar.go --
import "foo"
func _() {
foo.Foo()
}
We would start searching from the foo.test variant, but we wouldn't
search package bar at all because bar does not import foo.test, it
imports plain foo. Now we search from both foo and foo.test (you still
need search foo.test to find references within foo_test.go).
Fixesgolang/go#35936.
Change-Id: I5fd2f7bb130a421ed6fad92da11179995c99a2cf
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210537
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This CL teaches lsp to report `**T` instead of `**invalid type`,
`func (badParam) badResult` instead of `func (invalid type) invalid type`, etc.
To do that, we need to detect "invalid type" inside any part of a type.
I've added typeIsValid() function for that.
To simplify type formating code in resolveInvalid(), formatNode
function is added that can also format *ast.StarExpr (of any depth).
Since we already used AST printer in the same file, I
added formatNode function that is now used in both places.
While at it, replaced bytes.Buffer to strings.Builder there.
Change-Id: I3bb84c58c417b175cceefb410e238c48425f7cee
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210357
Run-TryBot: Iskander Sharipov <quasilyte@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
We previously only searched for implementations of the object we found
in the "widest" package variant. We instead need to search all
variants because each variant is type checked separately, and
implementations can be located in packages associated with different
variants.
For example, say you have:
-- foo/foo.go --
package foo
type Foo int
type Fooer interface { Foo() Foo }
-- foo/foo_test.go --
package foo
func TestFoo(t *testing.T) {}
-- bar/bar.go --
package bar
import "foo"
type impl struct {}
func (impl) Foo() foo.Foo { return 0 }
When you run find-implementations on the Fooer interface, we
previously would start from the (widest) foo.test's Fooer named
type. Unfortunately bar imports foo, not foo.test, so bar.impl
does not implement foo.test.Fooer. The specific reason is that
bar.impl.Foo returns foo.Foo, whereas foo.test.Fooer.Foo returns
foo.test.Foo, which are distinct *types.Named objects.
Starting our search instead from foo.Fooer resolves this issue.
However, we also need to search from foo.test.Fooer so we match any
implementations in foo_test.go.
Change-Id: I0b0039c98925410751c8f643c8ebd185340e409f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/210459
Run-TryBot: Muir Manders <muir@mnd.rs>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Lack of context in error messages is making my life difficult. Add
context to a few, refactoring out some duplicate code along the way.
Change-Id: I3a940b12ec7c82b1ae1fc477694a2b8b45f6ff71
Reviewed-on: https://go-review.googlesource.com/c/tools/+/209860
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
When the cursor is on a return statement or in the function declaration
it will highlight the control flow for the function. It will also highlight
individual fields and results if the cursor is specifically in one.
Fixes#34496
Change-Id: I71d460cd174a8fbc61d119b9633c3c3ecbde2af9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208267
Run-TryBot: Rohan Challa <rohan@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
When packages.Load'ing cgo packages, the authored files show up in
GoFiles, and the generated files show up in CompiledGoFiles. We need the
AST and type information for the latter, since they're the only thing we
can type check. But we also need the contents (and column mapper) for
the authored file so that we can navigate into it.
Store GoFiles in package metadata and checked Packages. Parse the extra
files, just for their mappers. Refactor the View functions a little bit,
since there's only one place that actually needs to find the mapper for
a file.
Updates golang/go#35720.
Change-Id: I9f96872a9a592bf0e11da27ebd8976c6db8752c9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208502
Run-TryBot: Heschi Kreinick <heschi@google.com>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
When //line directives are in play, the ast.File's Offset function will
return offsets in the generated file. We want offsets in the authored
file, so we need to pass a Converter for the authored file, in addition
to the ast.File for the generated file. For the same reason, we have to
start (Range).Span() by translating into positions in the authored file,
then calculate offsets from that.
A lot of call sites outside of the LSP don't pass the Converter, but
they probably don't matter much. I think everything inside does because
it ends up using mappedRange.
Updates golang/go#35720.
Change-Id: I7be09b3a50720b078e862d48cfdb02208f8187ae
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208501
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
In cases like:
var foo []bytes.Buffer
foo = append(foo, <>)
you will now get a literal candidate "bytes.Buffer{}". Previously we
were skipping all literal candidates at the variadic position, but the
intention was to only skip literal slice candidates (i.e.
"[]bytes.Buffer{}" in the above example).
I also improved the literal struct snippet to not leave the cursor
inside the curlies when the struct type has no accessible fields.
Previously it was only checking if the struct had no fields at all.
This means after completing in the above example you will end up with
"bytes.Buffer{}<>" instead of "bytes.Buffer{<>}", where "<>" denotes
the cursor.
Change-Id: Ic2604a4ea65d84ad855ad6e6d98b8ab76eb08d77
Reviewed-on: https://go-review.googlesource.com/c/tools/+/207537
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Type aliases don't work well with types.TypeString. Work around that by
using the AST to build this information. Follow up from CL 201677.
Fixesgolang/go#33500
Change-Id: I8b2d4ea238eb5d284a419f2b0bbf9655e69d434d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208497
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
As we improve support for cgo we'll need to reference GoFiles, not just
CompiledGoFiles. "Files" is right out.
I think I got everything that needs renaming but please let me know if
not.
Updates golang/go#35720.
Change-Id: I97a6ebf5b395535de0d5f4f8b3f84b46ca34643f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/208101
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
None of the godef tests were running due to a mistake in the test
harness code. Fix them and re-enable.
We decided that the range for an import statement should be the whole
import path, not just the first character, so make that change and
adjust the PrepareRename tests accordingly.
Change-Id: I45756a78f2a1beb3c5180b5f288ce078075624bf
Reviewed-on: https://go-review.googlesource.com/c/tools/+/207900
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
In cases like:
var foo []io.Writer
var buf *bytes.Buffer
foo = append(foo, <>)
we weren't giving "buf" a good score. When comparing the candidate
type *bytes.Buffer to the (variadic) expected type []io.Writer we were
turning the candidate type into []*bytes.Buffer. However, of course,
[]*bytes.Buffer is not assignable to []io.Writer, so the types didn't
match. Now we instead turn the expected type []io.Writer into
io.Writer and compare to *bytes.Buffer.
I fixed the @rank test note to check that the candidates' scores are
strictly decreasing. Previously it would allow candidates with the
same score if they happened to be in the right order. This made it
easier to right a test for this issue, but also uncovered an issue
with untyped completion logic. I fixed it to do the untyped constant
check if _either_ the expected or candidate type is
untyped (previously it required the candidate type to be untyped).
Fixesgolang/go#35625.
Change-Id: I9a837d6a781669cb7a2f1d6d3d7f360c85be49eb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/207518
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change makes sure that we only return files that contain the given
position. There are a few instances of needing to look up files by URI
in the internal/lsp/cache package, so use an unexported package for
that. This allows us to remove some code in the implementations code.
Change-Id: Ifa7a62c67271826e6c632e4c88667d60f8b760c4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/206880
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
