Only internal linking without cgo is supported for now.
Change-Id: I91eb1572c1ccc805db62fc4c29080df98797d51a
Reviewed-on: https://go-review.googlesource.com/7048
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Pre/post-index addressing modes with writeback use .W and .P
instruction suffixes, like on ARM.
Complex addressing modes are not supported yet.
Change-Id: I537a1c3fe5b057c0812662677d0010bc8c468ffb
Reviewed-on: https://go-review.googlesource.com/7047
Reviewed-by: Rob Pike <r@golang.org>
ARM64 (ARMv8) has 32 general purpose, 64-bit integer registers
(R0-R31), 32 64-bit scalar floating point registers (F0-F31), and
32 128-bit vector registers (unused, V0-V31).
R31 is either the stack pointer (RSP), or the zero register (ZR),
depending on the instruction. Note the distinction between the
hardware stack pointer, RSP, and the virtual stack pointer SP.
The (hardware) stack pointer must be 16-byte aligned at all times;
the RSP register itself must be aligned, offset(RSP) only has to
have natural alignment.
Instructions are fixed-width, and are 32-bit wide. ARM64 supports
ARMv7 too (32-bit ARM), but not in the same process. In general,
there is not much in common between 32-bit ARM and ARM64, it's a
new architecture.
All implementations have floating point instructions.
This change adds a Prog.To3 field analogous to Prog.To. It is used
by exclusive load/store instructions such as STLXR which read from
one register, and write to both a register and a memory address.
STLXRW R1, (R0), R3
This will store the word contained in R1 to the memory address
pointed by R0. R3 will be updated with the status result of the
store. It is used to implement atomic operations.
No other changes are made to the portable Prog and Addr structures.
Change-Id: Ie839029aa5265bbad35769d9689eca11e1c48c47
Reviewed-on: https://go-review.googlesource.com/7046
Reviewed-by: Russ Cox <rsc@golang.org>
ARM64 doesn't have the old assembler.
Change-Id: I9253271029440e2b7f2813d3e98a7d2e7a65bfbc
Reviewed-on: https://go-review.googlesource.com/7045
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
OpenBSD/arm only currently supports softfloat, hence make the default GOARM=5.
Change-Id: Ie3e8f457f001b3803d17ad9bc4ab957b2da18c6a
Reviewed-on: https://go-review.googlesource.com/7614
Reviewed-by: Minux Ma <minux@golang.org>
DragonFlyBSD dropped support for i386 in 4.0 and there is no longer a
dragonfly/386 - as such, remove the Go port.
Fixes#8951Fixes#7580Fixes#7421
Change-Id: I69022ab2262132e8f97153f14dc8c37c98527008
Reviewed-on: https://go-review.googlesource.com/7543
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Joel Sing <jsing@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Just little bits and pieces I noticed were unused in passing, and
some more found with https://github.com/opennota/check.
Change-Id: I199fecdbf8dc2ff9076cf4ea81395275c7f171c3
Reviewed-on: https://go-review.googlesource.com/7033
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I3096a7497955bc475739739ee23be387e9162867
Reviewed-on: https://go-review.googlesource.com/7210
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Float.Cmp used to return a value < 0, 0, or > 0 depending on how
arguments x, y compared against each other. With the possibility
of NaNs, the result was changed into an Accuracy (to include Undef).
Consequently, Float.Cmp results could still be compared for (in-)
equality with 0, but comparing if < 0 or > 0 would provide the
wrong answer w/o any obvious notice by the compiler.
This change wraps Float.Cmp results into a struct and accessors
are used to access the desired result. This prevents incorrect
use.
Change-Id: I34e6a6c1859251ec99b5cf953e82542025ace56f
Reviewed-on: https://go-review.googlesource.com/7526
Reviewed-by: Rob Pike <r@golang.org>
namebuf was a global char buffer in the C version of gc, which was
useful for providing common storage for constructing symbol and file
names. However, now that it's just a global Go string and the string
data is dynamically allocated anyway, it doesn't serve any purpose
except to force extra write barriers everytime it's assigned to.
Also, introduce Lookupf(fmt, args...) as shorthand for
Lookup(fmt.Sprintf(fmt, args...)), which was a very common pattern for
using namebuf.
Passes "go build -toolexec 'toolstash -cmp' -a std".
Notably, this CL shrinks 6g's text section by ~15kB:
$ size toolstash/6g tool/linux_amd64/6g
text data bss dec hex filename
4600805 605968 342988 5549761 54aec1 toolstash/6g
4585547 605968 342956 5534471 547307 tool/linux_amd64/6g
Change-Id: I98abb44fc7f43a2e2e48425cc9f215cd0be37442
Reviewed-on: https://go-review.googlesource.com/7080
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Update cmd/7g to match the other compilers. Fixes build break in rev 6582d1cf8.
Change-Id: I449613cf348254e9de6cc7a6b7737e43ea7d10fe
Reviewed-on: https://go-review.googlesource.com/7580
Reviewed-by: Dave Cheney <dave@cheney.net>
The argument is never consulted apart from passing it to recursive
calls. So delete it.
Change-Id: Ia15eefb6385b3c99ea4def88f564f4e5a94c68ab
Reviewed-on: https://go-review.googlesource.com/7032
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The kern.rthreads sysctl has not existed for a long time - there is no way to
disable rthreads and __tfork no longer returns ENOTSUP.
Change-Id: Ia50ff01ac86ea83358e72b8f45f7818aaec1e4b1
Reviewed-on: https://go-review.googlesource.com/7490
Reviewed-by: Minux Ma <minux@golang.org>
Also:
- Implemented NewFloat convenience factory function (analogous to
NewInt and NewRat).
- Implemented convenience accessors for Accuracy values returned
from Float.Cmp.
- Added test and example.
Change-Id: I985bb4f86e6def222d4b2505417250d29a39c60e
Reviewed-on: https://go-review.googlesource.com/6970
Reviewed-by: Alan Donovan <adonovan@google.com>
Four spaces is what works well for both 4- and 8-space tab stops.
Screen with fixed-width font and 4-space tab stops:
http://imgur.com/lps5Lbb
Change-Id: I7d2b813d674c3e0a68f79d63bc5d5ec5bd4f87bb
Reviewed-on: https://go-review.googlesource.com/7503
Reviewed-by: Rob Pike <r@golang.org>
This is a fairly significant _internal_ representation change. Instead
of encoding 0, finite, infinite, and NaN values with special mantissa
and exponent values, a new (1 byte) 'form' field is used (without making
the Float struct bigger). The form field permits simpler and faster
case distinctions. As a side benefit, for zero and non-finite floats,
fewer fields need to be set. Also, the exponent range is not the full
int32 range (in the old format, infExp and nanExp were used to represent
Inf and NaN values and tests for those values sometimes didn't test
for the empty mantissa, so the range was reduced by 2 values).
The correspondence between the old and new fields is as follows.
Old representation:
x neg mant exp
---------------------------------------------------------------
+/-0 sign empty 0
0 < |x| < +Inf sign mantissa exponent
+/-Inf sign empty infExp
NaN false empty nanExp
New representation (- stands for ignored fields):
x neg mant exp form
---------------------------------------------------------------
+/-0 sign - - zero
0 < |x| < +Inf sign mantissa exponent finite
+/-Inf sign - - inf
NaN - - - nan
Client should not be affected by this change.
Change-Id: I7e355894d602ceb23f9ec01da755fe6e0386b101
Reviewed-on: https://go-review.googlesource.com/6870
Reviewed-by: Alan Donovan <adonovan@google.com>
Make PrintDefaults print an easier-to-read format, and allow the user
to control it a bit by putting a hint into the usage string.
Here is the new doc comment for PrintDefaults, which does the work:
PrintDefaults prints, to standard error unless configured otherwise, a
usage message showing the default settings of all defined command-line
flags. For an integer valued flag x, the default output has the form
-x int
usage-message-for-x (default 7)
The usage message will appear on a separate line except for single-
letter boolean flags. Boolean flags omit the type, since they can be
used without an actual value, and the parenthetical default is omitted
if the default is the zero value for the type. The type, here int, can
be replaced by a string of the user's choosing by placing in the usage
string for the flag a back-quoted name; the first such item in the
message is taken to be a parameter name to show in the message and the
back quotes are stripped from the message when displayed. For instance,
given
flag.String("I", "", "search `directory` for include files")
the output will be
-I directory
search directory for include files.
Given
A = flag.Bool("A", false, "for bootstrapping, allow 'any' type")
B = flag.Bool("Alongflagname", false, "disable bounds checking")
C = flag.Bool("C", true, "a boolean defaulting to true")
D = flag.String("D", "", "set relative `path` for local imports")
F = flag.Float64("F", 2.7, "a non-zero float")
G = flag.Float64("G", 0, "a float that defaults to zero")
N = flag.Int("N", 27, "a non-zero int")
Z = flag.Int("Z", 0, "an int that defaults to zero")
T = flag.Duration("deltaT", 0, "a duration")
the old output was
-A=false: for bootstrapping, allow 'any' type
-Alongflagname=false: disable bounds checking
-C=true: a boolean defaulting to true
-D="": set relative `path` for local imports
-F=2.7: a non-zero float
-G=0: a float that defaults to zero
-N=27: a non-zero int
-Z=0: an int that defaults to zero
-deltaT=0: a duration
and the new output is
-A for bootstrapping, allow 'any' type
-Alongflagname
disable bounds checking
-C a boolean defaulting to true (default true)
-D path
set relative path for local imports
-F float
a non-zero float (default 2.7)
-G float
a float that defaults to zero
-N int
a non-zero int (default 27)
-Z int
an int that defaults to zero
-deltaT duration
a duration
Change-Id: I54ab3cd5610d551422b004d95ab78305e06a395d
Reviewed-on: https://go-review.googlesource.com/7330
Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The old, per-architecture operand printers didn't lock down the
format of the constant in the MRC and MCR instructions (a value
that could be presented more helpfully - maybe how the
input looks? - but that is an issue for another day). But there is
a portable standard printer now so we can enable tests for these
instructions.
Change-Id: I437a3b112ce63f4d6e1fe3450fc21d8c3372602f
Reviewed-on: https://go-review.googlesource.com/7420
Reviewed-by: Russ Cox <rsc@golang.org>
When printing the type of the function there was no newline printed in
case of unexpected type.
Change-Id: I5946413f0864f712a1b955f488b436793018e0e0
Reviewed-on: https://go-review.googlesource.com/7480
Reviewed-by: Minux Ma <minux@golang.org>
Just a trivial thing I noticed in passing.
Change-Id: I875069ceffd623f9e430d07feb5042ab9e69917e
Reviewed-on: https://go-review.googlesource.com/7472
Reviewed-by: Rob Pike <r@golang.org>
Somehow, terribly embarrassingly, I lost part of the "re-enable
-shared on amd64" patch when rebasing before it got submitted.
This restores it and also fixes the addend to be the necessary -4.
Now updated so that Git will not put the new case into the wrong
switch.
Change-Id: I1d628232771a6d6ce6d085adf379f94a377822c5
Reviewed-on: https://go-review.googlesource.com/7126
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This allows /debug/pprof/ and descendents to be used through
http.StripPrefix and other path rewriting handlers.
Change-Id: I53673876c107bbfaf430123ead78e6524b42ac21
Reviewed-on: https://go-review.googlesource.com/7351
Reviewed-by: Andrew Gerrand <adg@golang.org>
