The misc/cgo/life and misc/cgo/stdio tests started out as fairly simple
test cases when they were added, but the machinery to execute them has
grown in complexity over the years.
They currently reuse the test/run.go runner and its "run" action without
needing much of the additional flexibility that said runner implements.
Given that runner isn't well documented, it makes it harder to see that
ultimately these tests just do 'go run' on a few test programs and check
that the output matches a golden file.
Maybe these test cases should move out of misc to be near similar tests,
or the machinery to execute them can made available in a package that is
easier and safer to reuse. I'd rather not block the refactor of the test
directory runner on that, so for now rewrite these to be self-contained.
Also delete misc/cgo/stdio/testdata/run.out which has no effect on the
test. It was seemingly accidentally kept behind during the refactor in
CL 6220049.
For #56844.
Change-Id: I5e2f542824925092cdddb03b44b6295a4136ccb4
Reviewed-on: https://go-review.googlesource.com/c/go/+/465755
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
Update references missed in CL 263142.
For #41190
Change-Id: I778760a6a69bd0440fec0848bdef539c9ccb4ee1
GitHub-Last-Rev: dda42b09ff
GitHub-Pull-Request: golang/go#42874
Reviewed-on: https://go-review.googlesource.com/c/go/+/273946
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Cherry Zhang <cherryyz@google.com>
It turns out that the relative-path support never worked in the first
place.
It had been masked by the fact that we ~never invoke overlayDir with
an absolute path, which caused filepath.Rel to always return an error,
and overlayDir to always fall back to absolute paths.
Since the absolute paths seem to be working fine (and are simpler),
let's stick with those. As far as I can recall, the relative paths
were only a space optimization anyway.
Updates #28387
Updates #30316
Change-Id: Ie8cd28f3c41ca6497ace2799f4193d7f5dde7a37
Reviewed-on: https://go-review.googlesource.com/c/go/+/208481
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Android tests are built on the host and run on the device. To do
that, the exec wrapper copies the test binary and testdata to the device.
To enable many more tests, make the copied environment more like the host:
- Copy all of pkg from GOROOT, not just the android pkg directory.
- Copy any parent testdata directories as well as the package's own.
- Copy *.go files from the package directory. This enables misc/cgo/stdio
and misc/cgo/life tests that were invisible before so disable them explicitly.
- Always copy the GOROOT, even for tests outside GOROOT. This is expensive
but only done once per make.bash.
- Build the go tool for the device and put it in PATH. Set GOCACHE
to a writable directory and disable cgo.
While here, use a single directory for all the exec wrapper files and
delete that once per make.bash as well.
In total, this CL enables many tests in the subrepos that would need skips
without it, in particular the x/tools tests.
Fixes#11452
Updates #23824
Updates #11811
Change-Id: I2e50d8b57db9bc4637f25272a5360c8b2cf4e627
Reviewed-on: https://go-review.googlesource.com/c/go/+/165797
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
I hope that this will fix the tests on iOS, but 'gomote create' isn't
giving me an instance I can test with. (Please patch and test before
approving.)
Updates #15919
Updates #30228
Change-Id: I1b7cd30d5b127a1ad3243b329fa005d229f69a24
Reviewed-on: https://go-review.googlesource.com/c/163726
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Elias Naur <mail@eliasnaur.com>
This CL removes the rundircmpout action completely
because it is not used anywhere.
The run case already looks for output files. Rename the cmpout action
mentioned in tests to the run action and remove "cmpout" from run.go.
Change-Id: I835ceb70082927f8e9360e0ea0ba74f296363ab3
Reviewed-on: https://go-review.googlesource.com/115575
Run-TryBot: Yury Smolsky <yury@smolsky.by>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This cuts 6 seconds off all.bash with the new go command.
Not a ton, but also an easy 6 seconds to grab.
The -tags=use_go_run in the misc/cgo tests is just some
go command flag that will make run.go use go run,
but without making everything look stale.
(Those tests have relative imports,
so go tool compile+link is not enough.)
Change-Id: I43bf4bb661d3adde2b2d4aad5e8f64b97bc69ba9
Reviewed-on: https://go-review.googlesource.com/73994
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The build tags are necessary to keep "go build" in that directory
building only stdio.go, but we have to arrange for test/run.go to
treat them as satisfied.
Fixes#12625.
Change-Id: Iec0cb2fdc2c9b24a4e0530be25e940aa0cc9552e
Reviewed-on: https://go-review.googlesource.com/17454
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
use a function to get stdout and stderr, instead of depending
on a specific libc implementation.
also make test/run.go replace \r\n by \n before comparing
output.
Fixes#2121.
Part of issue 1741.
R=alex.brainman, rsc, r, remyoudompheng
CC=golang-dev
https://golang.org/cl/5847068
Enhances test/run.go to support testing other directories
Will enable stdio tests on Windows in a follow-up CL.
R=golang-dev, alex.brainman, rsc
CC=golang-dev
https://golang.org/cl/6220049
Split stdout/stderr into a separate file so that can be handled
differently on some platforms. Both NetBSD and OpenBSD have defines
for stdout/stderr that require some coercion in order for cgo to
handle them correctly.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/6247062
All but 3 cases (in gcimporter.go and hixie.go)
are automatic conversions using gofix.
No attempt is made to use the new Append functions
even though there are definitely opportunities.
R=golang-dev, gri
CC=golang-dev
https://golang.org/cl/5447069
* Change use of m->g0 stack (aka scheduler stack).
* Provide runtime.mcall(f) to invoke f() on m->g0 stack.
* Replace scheduler loop entry with runtime.mcall(schedule).
Runtime.mcall eliminates the need for fake scheduler states that
exist just to run a bit of code on the m->g0 stack
(Grecovery, Gstackalloc).
The elimination of the scheduler as a loop that stops and
starts using gosave and gogo fixes a bad interaction with the
way cgo uses the m->g0 stack. Cgo runs external (gcc-compiled)
C functions on that stack, and then when calling back into Go,
it sets m->g0->sched.sp below the added call frames, so that
other uses of m->g0's stack will not interfere with those frames.
Unfortunately, gogo (longjmp) back to the scheduler loop at
this point would end up running scheduler with the lower
sp, which no longer points at a valid stack frame for
a call to scheduler. If scheduler then wrote any function call
arguments or local variables to where it expected the stack
frame to be, it would overwrite other data on the stack.
I realized this possibility while debugging a problem with
calling complex Go code in a Go -> C -> Go cgo callback.
This wasn't the bug I was looking for, it turns out, but I believe
it is a real bug nonetheless. Switching to runtime.mcall, which
only adds new frames to the stack and never jumps into
functions running in existing ones, fixes this bug.
* Move cgo-related code out of proc.c into cgocall.c.
* Add very large comment describing cgo call sequences.
* Simpilify, regularize cgo function implementations and names.
* Add test suite as misc/cgo/test.
Now the Go -> C path calls cgocall, which calls asmcgocall,
and the C -> Go path calls cgocallback, which calls cgocallbackg.
The shuffling, which affects mainly the callback case, moves
most of the callback implementation to cgocallback running
on the m->curg stack (not the m->g0 scheduler stack) and
only while accounted for with $GOMAXPROCS (between calls
to exitsyscall and entersyscall).
The previous callback code did not block in startcgocallback's
approximation to exitsyscall, so if, say, the garbage collector
were running, it would still barge in and start doing things
like call malloc. Similarly endcgocallback's approximation of
entersyscall did not call matchmg to kick off new OS threads
when necessary, which caused the bug in issue 1560.
Fixes#1560.
R=iant
CC=golang-dev
https://golang.org/cl/4253054
Clean up an error message and error exit too.
Insert blank line after "DO NOT EDIT" comment
to keep it from being a doc comment.
Fixes#1213.
Fixes#1222.
R=r
CC=golang-dev
https://golang.org/cl/3608042
* Add documentation about array arguments. Fixes issue 1125.
* Do not interpret x, y := z, w as special errno form. Fixes issue 952.
* Fix nested Go calls (brainman). Fixes issue 907.
R=r
CC=golang-dev
https://golang.org/cl/2214044
* remember #defined names, so that C.stdout can refer
to the real name (on OS X) __stdoutp.
* better handling of #defined constant expressions
* allow n, err = C.strtol("asdf", 0, 123) to get errno as os.Error
* write all output files to current directory
* don't require gcc output if there was no input
Fixes#533.
Fixes#709.
Fixes#756.
R=r
CC=dho, golang-dev, iant
https://golang.org/cl/1734047
parsing and printing to new syntax.
Use -oldparser to parse the old syntax,
use -oldprinter to print the old syntax.
2) Change default gofmt formatting settings
to use tabs for indentation only and to use
spaces for alignment. This will make the code
alignment insensitive to an editor's tabwidth.
Use -spaces=false to use tabs for alignment.
3) Manually changed src/exp/parser/parser_test.go
so that it doesn't try to parse the parser's
source files using the old syntax (they have
new syntax now).
4) gofmt -w src misc test/bench
1st set of files.
R=rsc
CC=agl, golang-dev, iant, ken2, r
https://golang.org/cl/180047
This change removes the necessity to have GOBIN in $PATH,
and also doesn't assume that the build is being run from
$GOROOT/src. This is a minimal set of necessary changes
to get Go to build happily from the FreeBSD ports
collection.
R=rsc
CC=golang-dev
https://golang.org/cl/171044
the bash scripts and makefiles for building go didn't take into account
the fact $GOROOT / $GOBIN could both be directories containing whitespaces,
and was not possible to build it in such a situation.
this commit adjusts the various makefiles/scripts to make it aware of that
possibility, and now it builds successfully when using a path with whitespaces
as well.
Fixes#115.
R=rsc, dsymonds1
https://golang.org/cl/157067
cgo/libmach remain unimplemented. However, compilers, runtime,
and packages are 100%. I still need to go through and implement
missing syscalls (at least make sure they're all listed), but
for all shipped functionality, this is done. Ship! ;)
R=rsc, VenkateshSrinivas
https://golang.org/cl/152142
better mach binaries.
cgo working on darwin+linux amd64+386.
eliminated context switches - pi is 30x faster.
add libcgo to build.
on snow leopard:
- non-cgo binaries work; all tests pass.
- cgo binaries work on amd64 but not 386.
R=r
DELTA=2031 (1316 added, 626 deleted, 89 changed)
OCL=35264
CL=35304
