If a general comment contains multiple newline characters, we can't
simply unread one and then re-lex it via the general whitespace lexing
phase, because then we'll reset lineno to the line before the "*/"
marker, rather than keeping it where we found the "/*" marker.
Also, for processing imports, call importfile before advancing the
lexer with p.next(), so that lineno reflects the line where we found
the import path, and not the token afterwards.
Fixes#14520.
Change-Id: I785a2d83d632280113d4b757de0d57c88ba2caf4
Reviewed-on: https://go-review.googlesource.com/19934
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Always reading runes (rather than bytes) has negligible overhead
(a simple if at the moment - it can be eliminated eventually) but
simplifies the lexer logic and opens up the door for speedups.
In the process remove many int conversions that are now not needed
anymore.
Also, because identifiers are now more easily recognized, remove
talph label and move identifier lexing "in place".
Also, instead of accepting all chars < 0x80 and then check for
"frogs", only permit valid characters in the first place. Removes
an extra call for common simple tokens and leads to simpler logic.
`time go build -a net/http` (best of 5 runs) seems 1% faster.
Assuming this is in the noise, there is no noticeable performance
degradation with this change.
Change-Id: I3454c9bf8b91808188cf7a5f559341749da9a1eb
Reviewed-on: https://go-review.googlesource.com/19847
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Merge push_parser and pop_parser into a single parse_import function
and inline unimportfile. Shake out function boundaries a little bit so
that the symmetry is readily visible.
Move the import_package call into parse_import (and inline
import_there into import_package). This means importfile no longer
needs to provide fake import data to be needlessly lexed/parsed every
time it's called.
Also, instead of indicating import success/failure by whether the next
token is "package", import_spec can just check whether importpkg is
non-nil.
Tangentially, this somehow alters the diagnostics produced for
test/fixedbugs/issue11610.go. However, the new diagnostics are more
consistent with those produced when the empty import statement is
absent, which seems more desirable than maintaining the previous
errors.
Change-Id: I5cd1c22aa14da8a743ef569ff084711d137279d5
Reviewed-on: https://go-review.googlesource.com/19650
Reviewed-by: Robert Griesemer <gri@golang.org>
Walking the field name as if it were an expression
caused a called to haspointers with a TFIELD, which panics.
Trigger was a field at a large offset within a large struct,
combined with a struct literal expression mentioning that
field.
Fixes#14405
Change-Id: I4589badae27cf3d7cf365f3a66c13447512f41f9
Reviewed-on: https://go-review.googlesource.com/19699
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This bug was introduced in golang.org/cl/18217,
while trying to fix#13777.
Originally I wanted to just disable inlining for the case
being handled incorrectly, but it's fairly difficult to detect
and much easier just to fix. Since the case being handled
incorrectly was inlined correctly in Go 1.5, not inlining it
would also be somewhat of a regression.
So just fix it.
Test case copied from Ian's CL 19520.
The mistake to worry about in this CL would be relaxing
the condition too much (we now print the note more often
than we did yesterday). To confirm that we'd catch this mistake,
I checked that changing (!fmtbody || !t.Funarg) to (true) does
cause fixedbugs/issue13777.go to fail. And putting it back
to what is written in this CL makes that test pass again
as well as the new fixedbugs/issue14331.go.
So I believe that the new condition is correct for both constraints.
Fixes#14331.
Change-Id: I91f75a4d5d07c53af5caea1855c780d9874b8df6
Reviewed-on: https://go-review.googlesource.com/19514
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Semi-regular merge from tip to dev.ssa.
Two fixes:
1) Mark selectgo as not returning. This caused problems
because there are no VARKILL ops on the selectgo path,
causing things to be marked live that shouldn't be.
2) Tell the amd64 assembler that addressing modes like
name(SP)(AX*4) are ok.
Change-Id: I9ca81c76391b1a65cc47edc8610c70ff1a621913
Brief background on "why heap allocate". Things can be
forced to the heap for the following reasons:
1) address published, hence lifetime unknown.
2) size unknown/too large, cannot be stack allocated
3) multiplicity unknown/too large, cannot be stack allocated
4) reachable from heap (not necessarily published)
The bug here is a case of failing to enforce 4) when an
object Y was reachable from a heap allocation X forced
because of 3). It was found in the case of a closure
allocated within a loop (X) and assigned to a variable
outside the loop (multiplicity unknown) where the closure
also captured a map (Y) declared outside the loop (reachable
from heap). Note the variable declared outside the loop (Y)
is not published, has known size, and known multiplicity
(one). The only reason for heap allocation is that it was
reached from a heap allocated item (X), but because that was
not forced by publication, it has to be tracked by loop
level, but escape-loop level was not tracked and thus a bug
results.
The fix is that when a heap allocation is newly discovered,
use its looplevel as the minimum loop level for downstream
escape flooding.
Every attempt to generalize this bug to X-in-loop-
references-Y-outside loop succeeded, so the fix was aimed
to be general. Anywhere that loop level forces heap
allocation, the loop level is tracked. This is not yet
tested for all possible X and Y, but it is correctness-
conservative and because it caused only one trivial
regression in the escape tests, it is probably also
performance-conservative.
The new test checks the following:
1) in the map case, that if fn escapes, so does the map.
2) in the map case, if fn does not escape, neither does the map.
3) in the &x case, that if fn escapes, so does &x.
4) in the &x case, if fn does not escape, neither does &x.
Fixes#13799.
Change-Id: Ie280bef2bb86ec869c7c206789d0b68f080c3fdb
Reviewed-on: https://go-review.googlesource.com/18234
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Adding the evconst(n) call for OANDAND and OOROR in
golang.org/cl/18262 was originally just to parallel the above iscmp
branch, but upon further inspection it seemed odd that removing it
caused test/fixedbugs/issue6671.go's
var b mybool
// ...
b = bool(true) && true // ERROR "cannot use"
to start failing (i.e., by not emitting the expected "cannot use"
error).
The problem is that evconst(n)'s settrue and setfalse paths always
reset n.Type to idealbool, even for logical operators where n.Type
should preserve the operand type. Adding the evconst(n) call for
OANDAND/OOROR inadvertantly worked around this by turning the later
evconst(n) call at line 2167 into a noop, so the "n.Type = t"
assignment at line 739 would preserve the operand type.
However, that means evconst(n) was still clobbering n.Type for ONOT,
so declarations like:
const _ bool = !mybool(true)
were erroneously accepted.
Update #13821.
Change-Id: I18e37287f05398fdaeecc0f0d23984e244f025da
Reviewed-on: https://go-review.googlesource.com/18362
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Added a format option to inhibit output of .Note field in
printing, and enabled that option during export.
Added test.
Fixes#13777.
Change-Id: I739f9785eb040f2fecbeb96d5a9ceb8c1ca0f772
Reviewed-on: https://go-review.googlesource.com/18217
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Chase <drchase@google.com>
Fixes#12411.
Change-Id: I2202a754c7750e3b2119e3744362c98ca0d2433e
Reviewed-on: https://go-review.googlesource.com/17818
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Another (historic) artifact due to partially resolving symbols too early.
Fixes#13539.
Change-Id: Ie720c491cfa399599454f384b3a9735e75d4e8f1
Reviewed-on: https://go-review.googlesource.com/17600
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Damien Neil <dneil@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Following an empty import, a declaration involving a ? symbol
generates an internal compiler error when the name of the
symbol (in newname function).
package a
import""
var?
go.go:2: import path is empty
go.go:3: internal compiler error: newname nil
Make sure dclname is not called when the symbol is nil.
The error message is now:
go.go:2: import path is empty
go.go:3: invalid declaration
go.go:4: syntax error: unexpected EOF
This CL was initially meant to be applied to the old parser,
and has been updated to apply to the new parser.
Fixes#11610
Change-Id: I75e07622fb3af1d104e3a38c89d9e128e3b94522
Reviewed-on: https://go-review.googlesource.com/15268
Reviewed-by: Russ Cox <rsc@golang.org>
The following code:
func n() {(interface{int})}
generates:
3: interface contains embedded non-interface int
3: type %!v(PANIC=runtime error: invalid memory address or nil pointer dereference) is not an expression
It is because the corresponding symbol (Sym field in Type object)
is nil, resulting in a panic in typefmt.
Just skip the symbol if it is nil, so that the error message becomes:
3: interface contains embedded non-interface int
3: type interface { int } is not an expression
Fixes#11614
Change-Id: I219ae7eb01edca264fad1d4a1bd261d026294b00
Reviewed-on: https://go-review.googlesource.com/14015
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
- use same local variable name (lno) for line number for LCOLAS everywhere
- remove now unneeded assignment of line number to yylval.i in lexer
Fix per suggestion of mdempsky.
Fixes#13415.
Change-Id: Ie3c7f5681615042a12b81b26724b3a5d8a979c25
Reviewed-on: https://go-review.googlesource.com/17248
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Use a combination of follow- and stop-token lists and nesting levels
to better synchronize parser after a syntax error.
Fixes#13319.
Change-Id: I9592e0b5b3ba782fb9f9315fea16163328e204f7
Reviewed-on: https://go-review.googlesource.com/17080
Reviewed-by: Chris Manghane <cmang@golang.org>
Handling of &(T{}) assumed that the parser would not introduce ()'s.
Also: Better comments around handling of OPAREN syntax tree optimization.
Fixes#13261.
Change-Id: Ifc5047a0448f5e7d74cd42f6608b87dcc9c2f2fb
Reviewed-on: https://go-review.googlesource.com/17040
Reviewed-by: Chris Manghane <cmang@golang.org>
Also:
- better error messages in some cases
- factored out function to produce syntax error at given line number
Fixes#13273.
Change-Id: I0192a94731cc23444680a26bd0656ef663e6da0b
Reviewed-on: https://go-review.googlesource.com/16992
Reviewed-by: Chris Manghane <cmang@golang.org>
This is a translation of the yacc-based parser with adjustements
to make the grammar work for a recursive-descent parser followed
by cleanups and simplifications.
The yacc actions were mostly literally copied for correctness
with better temporary names.
A few of the syntax tests were adjusted for slightly different
error messages (it is very difficult to match the yacc-based
error messages in all cases, and sometimes the new parser could
produce better errors).
The new parser is enabled by default.
To switch back to the yacc-based parser, set -oldparser.
To hardwire the switch back, uncomment "oldparser = 1" in lex.go.
- passes all.bash
- ~18% reduced parse time per file on average for make.bash
- ~3% reduced compile time for building cmd/compile
Change-Id: Icb5651bb9d8b9f66261762d2c94a03793050d4ce
Reviewed-on: https://go-review.googlesource.com/16665
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Skip fixedbugs/issue10607.go because external linking is not supported
yet.
Skip nilptr3.go because of issue #9058 (same as ppc64).
Change-Id: Ib3dfbd9a03ee4052871cf57c74b3cc5e745e1f80
Reviewed-on: https://go-review.googlesource.com/14461
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
