Currently, mhdr/methods is emitted with the same len/cap. There's no way
to distinguish between exported and non-exported methods statically.
This CL splits mhdr/methods into two parts, use "len" for number of
exported methods, and "cap" for all methods. This fixes the bug in
issue #22075, which intends to return the number of exported methods but
currently return all methods.
Note that with this encoding, we still can access either
all/exported-only/non-exported-only methods:
mhdr[:cap(mhdr)] // all methods
mhdr // exported methods
mhdr[len(mhdr):cap(mhdr)] // non-exported methods
Thank to Matthew Dempsky (@mdempsky) for suggesting this encoding.
Fixes#22075
Change-Id: If662adb03ccff27407d55a5578a0ed05a15e7cdd
Reviewed-on: https://go-review.googlesource.com/c/go/+/259237
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The current specification does not foresee a SameSite attribute without
a value. While the existing implementation would serialize SameSite in a
way that would likely be ignored by well-impelemented clients, it is
better to not rely on this kind of quirks.
Specification: https://tools.ietf.org/html/draft-ietf-httpbis-rfc6265bis-05#section-4.1.1Fixes#36990
Change-Id: Ie51152741d7e84bab64d3e4e4f780286932acbde
Reviewed-on: https://go-review.googlesource.com/c/go/+/256498
Trust: Roberto Clapis <roberto@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Also add a few more TODOs as found by the relnote command.
It's an incomplete list due to #41849.
For #40700.
Change-Id: Id17a9be86d3338e1fcb281d26e7298ff26e92864
Reviewed-on: https://go-review.googlesource.com/c/go/+/260337
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
netbsd/arm64 now complies with all the requirements for a port as
specified on https://golang.org/wiki/PortingPolicy
Note that this was preliminarily announced in the Go 1.13 release notes
(CL 183637) but then removed again due to the port lacking a builder at
that time (CL 192997).
Updates #30824
Change-Id: I2f40fabc84fe9cb699282e6a9d13ed9b64478e36
Reviewed-on: https://go-review.googlesource.com/c/go/+/259277
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Extends the IA5String encoding restrictions that are currently applied
to name constraints to dNSName, rfc822Name, and
uniformResourceIdentifier elements of the SAN. The utility function
isIA5String is updated to use unicode.MaxASCII rather than utf8.RuneSelf
as it is somewhat more readable.
Certificates that include these badly encoded names do exist, but are
exceedingly rare. zlint and other linters enforce this encoding and
searching censys.io reveals only three currently trusted certificates
with this particular encoding issue.
Fixes#26362
Change-Id: I7a4f3e165a1754e5b4bfaeabc03e01eb7367f3c9
Reviewed-on: https://go-review.googlesource.com/c/go/+/235078
Run-TryBot: Roland Shoemaker <roland@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Roland Shoemaker <roland@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Suggested by @yaxinlx.
Fixes#41612.
Change-Id: I98b9968a95d090ee3c67ff02678e1874e6d98c33
Reviewed-on: https://go-review.googlesource.com/c/go/+/257159
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Introduce GOOS=ios for iOS systems. GOOS=ios matches "darwin"
build tag, like GOOS=android matches "linux" and GOOS=illumos
matches "solaris". Only ios/arm64 is supported (ios/amd64 is
not).
GOOS=ios and GOOS=darwin remain essentially the same at this
point. They will diverge at later time, to differentiate macOS
and iOS.
Uses of GOOS=="darwin" are changed to (GOOS=="darwin" || GOOS=="ios"),
except if it clearly means macOS (e.g. GOOS=="darwin" && GOARCH=="amd64"),
it remains GOOS=="darwin".
Updates #38485.
Change-Id: I4faacdc1008f42434599efb3c3ad90763a83b67c
Reviewed-on: https://go-review.googlesource.com/c/go/+/254740
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
The instructions have already been updated in greater
detail in "Step 2: Configure git authentication", but
the overview needs updated to reflect the new workflow.
Change-Id: I6f411a3dc500a9058036a4a828403c0153e4220a
Reviewed-on: https://go-review.googlesource.com/c/go/+/256857
Trust: Katie Hockman <katie@golang.org>
Run-TryBot: Katie Hockman <katie@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
This flag, like the -e flag to 'go list', instructs the command to
make a best effort to continue in spite of errors for specific packages.
Fixes#26603
Change-Id: I5ee2f50c71870ae8ef3f9b3e5b045474adcca525
Reviewed-on: https://go-review.googlesource.com/c/go/+/255960
Trust: Bryan C. Mills <bcmills@google.com>
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
The cgo tool would sometimes emit a bitfield at an offset that did not
correspond to the C offset, such as for the example in the new test.
Change-Id: I61b2ca10ee44a42f81c13ed12865f2060168fed5
Reviewed-on: https://go-review.googlesource.com/c/go/+/252378
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
With this change, 'go install' will install executables in module mode
without using or modifying the module in the current directory, if
there is one.
For #40276
Change-Id: I922e71719b3a4e0c779ce7a30429355fc29930bf
Reviewed-on: https://go-review.googlesource.com/c/go/+/254365
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
The new semantics of the "all" package pattern can be implemented
without actually changing module loading per se. This change
implements those semantics, so that the change can be decoupled from
the changes to the module requirement graph.
For #36460
Change-Id: I0ee8b17afa8b728dc470a42a540fcc01764a4442
Reviewed-on: https://go-review.googlesource.com/c/go/+/240623
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Change the section to use <dl>, <dt>, and <dd> tags to match
previous documents.
Change-Id: Ide0bea698a84ed6b61b364ef9e2f3801ebb8d4d6
Reviewed-on: https://go-review.googlesource.com/c/go/+/250897
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes the file server to reject requests of the form:
"Range": "bytes=--N"
where "-N" is a negative suffix-length as designated by the
grammar in RFC 7233 Section 2.1, "Byte-Ranges", which specifies
that suffix-length MUST be of the form 1*DIGIT aka a non-negative digit.
Thus requests such as:
"Range": "bytes=--2"
will be rejected with a "416 Range Not Satisfiable" response.
Fixes#40940
Change-Id: I3e89f8326c14af30d8bdb126998a50e02ba002d9
Reviewed-on: https://go-review.googlesource.com/c/go/+/252497
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This catches cases where a test calls code that calls os.Exit(0),
thereby skipping all subsequent tests.
Fixes#29062
Change-Id: If9478972f40189e27623557e7141469ca4234d89
Reviewed-on: https://go-review.googlesource.com/c/go/+/250977
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This permits programs to reliably detect whether they are using a
closed network connection.
Fixes#4373
Change-Id: Ib4ce8cc82bbb134c4689f0ebc8b9b11bb8b32a22
Reviewed-on: https://go-review.googlesource.com/c/go/+/250357
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Russ Cox <rsc@golang.org>
For #24031
Change-Id: I9bd0905e9aacee4bec3463b7d91f6f0929744752
Reviewed-on: https://go-review.googlesource.com/c/go/+/228384
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The StripPrefix wrapper strips a prefix string from the request's
URL.Path field, but doesn't touch the RawPath field. This leads to the
confusing situation when StripPrefix handles a request with URL.RawPath
populated (due to some escaped characters in the request path) and the
wrapped request's RawPath contains the prefix but Path does not.
This change modifies StripPrefix to strip the prefix from both Path and
RawPath. If there are escaped characters in the prefix part of the
request URL the stripped handler serves a 404 instead of invoking the
underlying handler with a mismatched Path/RawPath pair.
This is a backward incompatible change for a very small minority of
requests; I would be surprised if anyone is depending on this behavior,
but it is possible. If that's the case, we could make a more
conservative change where the RawPath is trimmed if possible, but when
the prefix contains escaped characters then we don't 404 but rather send
through the invalid Path/RawPath pair as before.
Fixes#24366
Change-Id: I7030b8c183a3dfce307bc0272bba9a18df4cfe08
Reviewed-on: https://go-review.googlesource.com/c/go/+/233637
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The log package is used with the net/http but was not in the import clause.
Change-Id: Ic45b987633adf0ee15defd4d136b5d37027e22b0
GitHub-Last-Rev: e74aff5337
GitHub-Pull-Request: golang/go#36674
Reviewed-on: https://go-review.googlesource.com/c/go/+/215618
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Add a draft version of a blurb on improvements to the linker. This
will need to be finalized later in the release since there are still
some additional changes to be made to the linker in 1.16.
Updates #40703.
Change-Id: Id85c7e129071cc2faacb09c53a2968bd52b0a7b4
Reviewed-on: https://go-review.googlesource.com/c/go/+/248238
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Austin Clements <austin@google.com>
In Go 1.15 we switched the default linking mode for PIE on
Linux/AMD64 and Linux/ARM64 to internal linking. Clarify that
the previous behavior (external linking) can still be used with
a flag.
Fixes#40719.
Change-Id: Ib7042622bc91e1b1aa31f520990d03b5eb6c56bb
Reviewed-on: https://go-review.googlesource.com/c/go/+/248199
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This template is based on CL 220278 and previous ones like it.
Include Compiler and Linker sections proactively, they can be
removed if they don't end up being needed for Go 1.16.
Use two spaces of indentation for TODOs to set a better precedent
for the final text that will take its place.
'relnote -html' does not report any changes at this time.
For #40700.
Change-Id: I096b0ce0d33aaaa6fae9c91c0d2dfb89b9c5e94c
Reviewed-on: https://go-review.googlesource.com/c/go/+/248198
Reviewed-by: Carlos Amedee <carlos@golang.org>
See golang.org/cl/240657, which reverted the original change to fix the
regression reported in golang.org/issue/39427.
Updates #37419.
Change-Id: I39fbaa0b028ee00856cffea38879a631f540f057
Reviewed-on: https://go-review.googlesource.com/c/go/+/247718
Reviewed-by: Andrew Bonventre <andybons@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Andrew Bonventre <andybons@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The StdFormat flag was added as part of CL 231461, where the primary aim
was to fix the bug #37476. It's expected that the existing printer modes
only adjust spacing but do not change any of the code text itself. A new
printing flag served as a way for cmd/gofmt and go/format to delegate
a part of formatting work to the printer—where it's more more convenient
and efficient to perform—while maintaining current low-level printing
behavior of go/printer unmodified.
We already have cmd/gofmt and the go/format API that implement standard
formatting of Go source code, so there isn't a need to expose StdFormat
flag to the world, as it can only cause confusion.
Consider that to format source in canonical gofmt style completely it
may require tasks A, B, C to be done. In one version of Go, the printer
may do both A and B, while cmd/gofmt and go/format will do the remaining
task C. In another version, the printer may take on doing just A, while
cmd/gofmt and go/format will perform B and C. This makes it hard to add
a gofmt-like mode to the printer without compromising on above fluidity.
This change prefers to shift back some complexity to the implementation
of the standard library, allowing us to avoid creating the new exported
printing flag just for the internal needs of gofmt and go/format today.
We may still want to re-think the API and consider if something better
should be added, but unfortunately there isn't time for Go 1.15. We are
not adding new APIs now, so we can defer this decision until Go 1.16 or
later, when there is more time.
For #37476.
For #37453.
For #39489.
For #37419.
Change-Id: I0bb07156dca852b043487099dcf05c5350b29e20
Reviewed-on: https://go-review.googlesource.com/c/go/+/240683
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This doesn't change how ExtraNames are printed, so as not to cause
unnecessary churn of current outputs. Switched the ExtraNames check to a
nil check as we are checking for just-parsed values.
Fixes#39924Fixes#39873
Change-Id: Ifa07cfc1a057d73643710a774ef8a154222db187
Reviewed-on: https://go-review.googlesource.com/c/go/+/240543
Run-TryBot: Filippo Valsorda <filippo@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
