Use Brendan Gregg's FlameGraphs page link.
Mention the flame graph is available from the upstream pprof.
Change-Id: Ife1d5a5f4f93f20cd5952a09083f798b77d25a60
Reviewed-on: https://go-review.googlesource.com/83798
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
By the time Go 1.11 is released, OS X 10.9 Mavericks will have gone
two years with no security updates.
For #23011.
Change-Id: I6482852a14477985769b72c45c92416aae8be100
Reviewed-on: https://go-review.googlesource.com/83795
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Use “substantial”, which is believed to be the correct word.
Additionally, this change strips trailing whitespace from the file.
Change-Id: I5b6b718fc09e4b8b911b95e8be0733abd58e165d
Reviewed-on: https://go-review.googlesource.com/83356
Reviewed-by: Andrew Gerrand <adg@golang.org>
It's 32-bit binaries that fail for reasons unknown on 64-bit kernels.
Change-Id: Ib410af0491160e3ed8d32118966142516123db2c
Reviewed-on: https://go-review.googlesource.com/82655
Reviewed-by: Andrew Bonventre <andybons@golang.org>
GOMIPS is a GOARCH=mips{,le} specific option, for a choice between
hard-float and soft-float. Valid values are 'hardfloat' (default) and
'softfloat'. It is passed to the assembler as
'GOMIPS_{hardfloat,softfloat}'.
Note: GOMIPS will later also be used for a choice of MIPS instruction
set (mips32/mips32r2).
Updates #18162
Change-Id: I35417db8625695f09d6ccc3042431dd2eaa756a6
Reviewed-on: https://go-review.googlesource.com/37954
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The note about the single change workflow is included in the
git-codereview installation instructions, but it has nothing to do with
installing git-codereview. This note is more relevant for when a change
is actually being made.
Change-Id: Iccb90f3b7da87fab863fa4808438cd69a21a2fce
Reviewed-on: https://go-review.googlesource.com/76317
Reviewed-by: Steve Francia <spf@golang.org>
There were too many changes of direction. Tidy up the intro a little
for better flow, and delete some unnecessary comments.
Change-Id: Ib5d85c0992626bd3152f86a51585884d3e0cab72
Reviewed-on: https://go-review.googlesource.com/80495
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change drops the support for FreeBSD 9 or below and simplifies
platform-dependent code for the sake of maintenance.
Updates #7187.
Fixes#11412.
Updates #16064.
Updates #18854.
Fixes#19072.
Change-Id: I9129130aafbfc7d0d7e9b674b6fc6cb31b7381be
Reviewed-on: https://go-review.googlesource.com/64910
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Only a last sentence of A Tour of Go is shifting to the left.
I fixed a HTML tag order according to other sentences it.
Change-Id: I6a301178d15db893f596b8da80a4d98721160386
Reviewed-on: https://go-review.googlesource.com/79856
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This updates the name of the IDE and the capability it has.
Fixes#22784
Change-Id: Ief261324c86bc77a03071629f496f4d4d9df1b44
Reviewed-on: https://go-review.googlesource.com/79255
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The section about custom pprof paths referenced the wrong path.
This also fixes a couple minor grammatical issues elsewhere in the doc.
Fixes#22832
Change-Id: I890cceb53a13c1958d9cf958c658ccfcbb6863d5
Reviewed-on: https://go-review.googlesource.com/79035
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
Apparently we maintain this list by hand (for example, CL 52351).
Change-Id: I0a0b346cf2b7b547729cb1d0fa1642de447f7bba
Reviewed-on: https://go-review.googlesource.com/78117
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
GDB 7.5 recognizes DWARF4 by default.
GDB 7.5 release note does not explicitly mention DWARF4 support
but according to GCC 4.8 release note
https://gcc.gnu.org/gcc-4.8/changes.html
"DWARF4 is now the default when generating DWARF debug
information. ...
GDB 7.5, Valgrind 3.8.0 and elfutils 0.154 debug information
consumers support DWARF4 by default."
Change-Id: I56b011c7c38fbc103bbd366ceaea3b709c66ab7f
Reviewed-on: https://go-review.googlesource.com/77570
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
If people are interested in contributing to Go, but not sure what
change they'd like to make just yet, we can point them to the scratch
repo, so they can go through the process of submitting and merging
something now, and make more useful contributions later.
My evidence that sending people to the scratch repo would encourage
future contributions is that a number of people who went through the
workshop at Gophercon have continued to send CL's after submitting to
the scratch repo, even though I doubt they planned to before going
through the workshop.
Change-Id: Ieb48415773c0ee7dc400f8bf6f57f752eca8eeb5
Reviewed-on: https://go-review.googlesource.com/49970
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
A method expression is of the form T.m where T is a type and m
is a method of that type. The spec restricted T essentially to
a type name. Both cmd/compile and go/types accepted any type
syntactically, and a method expression was really just a form
of a selector expression x.f where x denotes a type.
This CL removes the spec syntax restriction from MethodExpr
to match the actual implementation. It also moves MethodExpr
from Operand to PrimaryExpr, because that's what it is.
It still keeps the separate notion of MethodExpr even though
it looks just like a selector expresion, since a MethodExpr
must start with a type rather than a value, and the spec's
syntax expresses this bit of semantics via distinct productions
(e.g., conversions look like calls but also must start with
a type).
Fixes#9060.
Change-Id: Idd84655b5b4f85d7ee53ebf749f73f0414a05f4a
Reviewed-on: https://go-review.googlesource.com/73233
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
https://golang.org/cl/71750 specifies iota values as indices,
thus making them independent from nested constant declarations.
This CL removes some of the comments in the examples that were
still referring to the old notion of iotas being incremented
and reset.
As an aside, please note that the spec still permits the use
of iota in a nested function (like before). Specifically, the
following cases are permitted by the spec (as before):
1) const _ = len([iota]int{})
2) const _ = unsafe.Sizeof(func(){ _ = iota })
For #15550.
Change-Id: I9e5fec75daf7b628b1e08d970512397e9c348923
Reviewed-on: https://go-review.googlesource.com/71912
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Issue #15550 is clearly an esoteric case but the spec was silent
about it and we had diverging implementations. By making `iota`
and index that is relative to the respective constant declaration,
nested const declarations won't affect outer values of `iota`.
cmd/compile and go/types already follow this semantics.
Fixes#15550.
Change-Id: If138189e3ea4373f8ba50ac6fb1d219b481f8698
Reviewed-on: https://go-review.googlesource.com/71750
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes#22258.
Change-Id: I43e68f1cf3163e1a041ebff2734ff2cb7943f695
Reviewed-on: https://go-review.googlesource.com/71431
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Nowhere in the spec did we mention the import path for package
unsafe. Now we do.
Fixes#22308.
Change-Id: Ifd42c873188e898c597cdee4284e7a9d234a9282
Reviewed-on: https://go-review.googlesource.com/71373
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Fixes#21054
Change-Id: I016486dc62c04a80727f8da7d1dcec52f2c7f344
Reviewed-on: https://go-review.googlesource.com/62291
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Chris Broadfoot <cbro@golang.org>
Update golang/go#22120
Change-Id: Ie7dbd0e7b01b116c960243a8cd3fa9fd121f317d
Reviewed-on: https://go-review.googlesource.com/68021
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>
Updated page to Page to match with the sample code
Fixes#21773
Change-Id: Ia884a22fd587860c7a6148103b2b474425e45284
Reviewed-on: https://go-review.googlesource.com/66790
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When we introduced the distinction between "defined" and "alias" types
we retained the notion of a "named" type (any type with a name). The
predeclared types (which all have names) simply remained named types.
This CL clarifies the spec by stating excplicitly which predeclared
types are defined types (or at least "act" like defined types), and
which ones are alias types.
Fixes#21785.
Change-Id: Ia8ae133509eb5d738e6757b3442c9992355e3535
Reviewed-on: https://go-review.googlesource.com/64591
Reviewed-by: Russ Cox <rsc@golang.org>
