This CL detects infinite loops due to negative dereference cycles
during escape analysis, and terminates the loop gracefully. We still
fail to print a complete explanation of the escape path, but esc.go
didn't print *any* explanation for these test cases, so the release
blocking issue here is simply that we don't infinite loop.
Updates #35518.
Change-Id: I39beed036e5a685706248852f1fa619af3b7abbc
Reviewed-on: https://go-review.googlesource.com/c/go/+/206619
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Unlike function calls, when processing instructions that directly
fault we must not subtract 1 from the pc before looking up the
file/line information.
Since the file/line lookup unconditionally subtracts 1, add 1 to
the faulting instruction PCs to compensate.
Fixes#34123
Change-Id: Ie7361e3d2f84a0d4f48d97e5a9e74f6291ba7a8b
Reviewed-on: https://go-review.googlesource.com/c/go/+/196962
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
This API was added for #25819, where it was discussed as math.FMA.
The commit adding it used math.Fma, presumably for consistency
with the rest of the unusual names in package math
(Sincos, Acosh, Erfcinv, Float32bits, etc).
I believe that using an idiomatic Go name is more important here
than consistency with these other names, most of which are historical
baggage from C's standard library.
Early additions like Float32frombits happened before "uppercase for export"
(so they were originally like "float32frombits") and they were not properly
reconsidered when we uppercased the symbols to export them.
That's a mistake we live with.
The names of functions we have added since then, and even a few
that were legacy, are more properly Go-cased, such as IsNaN, IsInf,
and RoundToEven, rather than Isnan, Isinf, and Roundtoeven.
And also constants like MaxFloat32.
For new API, we should keep using proper Go-cased symbols
instead of minimally-upper-cased-C symbols.
So math.FMA, not math.Fma.
This API has not yet been released, so this change does not break
the compatibility promise.
This CL also modifies cmd/compile, since the compiler knows
the name of the function. I could have stopped at changing the
string constants, but it seemed to make more sense to use a
consistent casing everywhere.
Change-Id: I0f6f3407f41e99bfa8239467345c33945088896e
Reviewed-on: https://go-review.googlesource.com/c/go/+/205317
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We seem to lack any tests for some corner cases of itab.init
(multiple methods with the same name, breaking itab.init doesn't
seem to fail any tests). We also lack tests that fix text of panics.
Add more tests for itab.init.
Change-Id: Id6b536179ba6b0d45c3cb9dc1c66b9311d0ab85e
Reviewed-on: https://go-review.googlesource.com/c/go/+/202451
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
In the dev.link branch we implemented the new object file format
and (part of) the linker improvements described in
https://golang.org/s/better-linker
The new object file is index-based and provides random access.
The linker maps the object files into read-only memory, and
access symbols on-demand using indices, as opposed to reading
all object files sequentially into the heap with the old format.
The linker carries symbol informations using indices (as opposed
to Symbol data structure). Symbols are created after the
reachability analysis, and only created for reachable symbols.
This reduces the linker's memory usage.
Linking cmd/compile, it creates ~25% fewer Symbols, and reduces
memory usage (inuse_space) by ~15%. (More results from Than.)
Currently, both the old and new object file formats are supported.
The old format is used by default. The new format can be turned
on by using the compiler/assembler/linker's -newobj flag. Note
that the flag needs to be specified consistently to all
compilations, i.e.
go build -gcflags=all=-newobj -asmflags=all=-newobj -ldflags=-newobj
Change-Id: Ia0e35306b5b9b5b19fdc7fa7c602d4ce36fa6abd
The logic for keeping arguments alive for calls to //go:uintptrescapes
functions was only applying to direct function calls. This CL changes
it to also apply to direct method calls, which should address most
uses of Proc.Call and LazyProc.Call.
It's still an open question (#34684) whether other call forms (e.g.,
method expressions, or indirect calls via function values, method
values, or interfaces).
Fixes#34474.
Change-Id: I874f97145972b0e237a4c9e8926156298f4d6ce0
Reviewed-on: https://go-review.googlesource.com/c/go/+/198043
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
CL 200958 adds skipping empty init function feature without any tests
for it. A codegen test sounds ideal, but it's unlikely that we can make
one for now, so use a program to manipulate runtime/proc.go:initTask
directly.
Updates #34869
Change-Id: I2683b9a1ace36af6861af02a3a9fb18b3110b282
Reviewed-on: https://go-review.googlesource.com/c/go/+/204217
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When we do a successful recover of a panic, we resume normal execution by
returning from the frame that had the deferred call that did the recover (after
executing any remaining deferred calls in that frame).
However, suppose we have called runtime.Goexit and there is a panic during one of the
deferred calls run by the Goexit. Further assume that there is a deferred call in
the frame of the Goexit or a parent frame that does a recover. Then the recovery
process will actually resume normal execution above the Goexit frame and hence
abort the Goexit. We will not terminate the thread as expected, but continue
running in the frame above the Goexit.
To fix this, we explicitly create a _panic object for a Goexit call. We then
change the "abort" behavior for Goexits, but not panics. After a recovery, if the
top-level panic is actually a Goexit that is marked to be aborted, then we return
to the Goexit defer-processing loop, so that the Goexit is not actually aborted.
Actual code changes are just panic.go, runtime2.go, and funcid.go. Adjusted the
test related to the new Goexit behavior (TestRecoverBeforePanicAfterGoexit) and
added several new tests of aborted panics (whose behavior has not changed).
Fixes#29226
Change-Id: Ib13cb0074f5acc2567a28db7ca6912cfc47eecb5
Reviewed-on: https://go-review.googlesource.com/c/go/+/200081
Run-TryBot: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
"declared and not used" is technically correct, but might confuse
the user. Switching "and" to "but" will hopefully create the
contrast for the users: they did one thing (declaration), but
not the other --- actually using the variable.
This new message is still not ideal (specifically, declared is not
entirely precise here), but at least it matches the other parsers
and is one step in the right direction.
Change-Id: I725c7c663535f9ab9725c4b0bf35b4fa74b0eb20
Reviewed-on: https://go-review.googlesource.com/c/go/+/203282
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Updates #35157 (the bug there was fixed by CL200861)
Change-Id: I67069207b4cdc2ad4a475dd0bbc8555ecc5f534f
Reviewed-on: https://go-review.googlesource.com/c/go/+/203598
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
Generate inline code at defer time to save the args of defer calls to unique
(autotmp) stack slots, and generate inline code at exit time to check which defer
calls were made and make the associated function/method/interface calls. We
remember that a particular defer statement was reached by storing in the deferBits
variable (always stored on the stack). At exit time, we check the bits of the
deferBits variable to determine which defer function calls to make (in reverse
order). These low-cost defers are only used for functions where no defers
appear in loops. In addition, we don't do these low-cost defers if there are too
many defer statements or too many exits in a function (to limit code increase).
When a function uses open-coded defers, we produce extra
FUNCDATA_OpenCodedDeferInfo information that specifies the number of defers, and
for each defer, the stack slots where the closure and associated args have been
stored. The funcdata also includes the location of the deferBits variable.
Therefore, for panics, we can use this funcdata to determine exactly which defers
are active, and call the appropriate functions/methods/closures with the correct
arguments for each active defer.
In order to unwind the stack correctly after a recover(), we need to add an extra
code segment to functions with open-coded defers that simply calls deferreturn()
and returns. This segment is not reachable by the normal function, but is returned
to by the runtime during recovery. We set the liveness information of this
deferreturn() to be the same as the liveness at the first function call during the
last defer exit code (so all return values and all stack slots needed by the defer
calls will be live).
I needed to increase the stackguard constant from 880 to 896, because of a small
amount of new code in deferreturn().
The -N flag disables open-coded defers. '-d defer' prints out the kind of defer
being used at each defer statement (heap-allocated, stack-allocated, or
open-coded).
Cost of defer statement [ go test -run NONE -bench BenchmarkDefer$ runtime ]
With normal (stack-allocated) defers only: 35.4 ns/op
With open-coded defers: 5.6 ns/op
Cost of function call alone (remove defer keyword): 4.4 ns/op
Text size increase (including funcdata) for go binary without/with open-coded defers: 0.09%
The average size increase (including funcdata) for only the functions that use
open-coded defers is 1.1%.
The cost of a panic followed by a recover got noticeably slower, since panic
processing now requires a scan of the stack for open-coded defer frames. This scan
is required, even if no frames are using open-coded defers:
Cost of panic and recover [ go test -run NONE -bench BenchmarkPanicRecover runtime ]
Without open-coded defers: 62.0 ns/op
With open-coded defers: 255 ns/op
A CGO Go-to-C-to-Go benchmark got noticeably faster because of open-coded defers:
CGO Go-to-C-to-Go benchmark [cd misc/cgo/test; go test -run NONE -bench BenchmarkCGoCallback ]
Without open-coded defers: 443 ns/op
With open-coded defers: 347 ns/op
Updates #14939 (defer performance)
Updates #34481 (design doc)
Change-Id: I63b1a60d1ebf28126f55ee9fd7ecffe9cb23d1ff
Reviewed-on: https://go-review.googlesource.com/c/go/+/202340
Reviewed-by: Austin Clements <austin@google.com>
This change introduces an arm intrinsic that generates the FMULAD
instruction for the fused-multiply-add operation on systems that
support it. System support is detected via cpu.ARM.HasVFPv4. A rewrite
rule translates the generic intrinsic to FMULAD.
Updates #25819.
Change-Id: I8459e5dd1cdbdca35f88a78dbeb7d387f1e20efa
Reviewed-on: https://go-review.googlesource.com/c/go/+/142117
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
To permit ssa-level optimization, this change introduces an amd64 intrinsic
that generates the VFMADD231SD instruction for the fused-multiply-add
operation on systems that support it. System support is detected via
cpu.X86.HasFMA. A rewrite rule can then translate the generic ssa intrinsic
("Fma") to VFMADD231SD.
The benchmark compares the software implementation (old) with the intrinsic
(new).
name old time/op new time/op delta
Fma-4 27.2ns ± 1% 1.0ns ± 9% -96.48% (p=0.008 n=5+5)
Updates #25819.
Change-Id: I966655e5f96817a5d06dff5942418a3915b09584
Reviewed-on: https://go-review.googlesource.com/c/go/+/137156
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
In order to make math.FMA a compiler intrinsic for ISAs like ARM64,
PPC64[le], and S390X, a generic 3-argument opcode "Fma" is provided and
rewritten as
ARM64: (Fma x y z) -> (FMADDD z x y)
PPC64: (Fma x y z) -> (FMADD x y z)
S390X: (Fma x y z) -> (FMADD z x y)
Updates #25819.
Change-Id: Ie5bc628311e6feeb28ddf9adaa6e702c8c291efa
Reviewed-on: https://go-review.googlesource.com/c/go/+/131959
Run-TryBot: Akhil Indurti <aindurti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
We need to explicitly convert pointers to unsafe.Pointer before
passing to the runtime checkptr instrumentation in case the user
declared their own type with underlying type unsafe.Pointer.
Updates #22218.
Fixes#34966.
Change-Id: I3baa2809d77f8257167cd78f57156f819130baa8
Reviewed-on: https://go-review.googlesource.com/c/go/+/201782
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Generate inline code at defer time to save the args of defer calls to unique
(autotmp) stack slots, and generate inline code at exit time to check which defer
calls were made and make the associated function/method/interface calls. We
remember that a particular defer statement was reached by storing in the deferBits
variable (always stored on the stack). At exit time, we check the bits of the
deferBits variable to determine which defer function calls to make (in reverse
order). These low-cost defers are only used for functions where no defers
appear in loops. In addition, we don't do these low-cost defers if there are too
many defer statements or too many exits in a function (to limit code increase).
When a function uses open-coded defers, we produce extra
FUNCDATA_OpenCodedDeferInfo information that specifies the number of defers, and
for each defer, the stack slots where the closure and associated args have been
stored. The funcdata also includes the location of the deferBits variable.
Therefore, for panics, we can use this funcdata to determine exactly which defers
are active, and call the appropriate functions/methods/closures with the correct
arguments for each active defer.
In order to unwind the stack correctly after a recover(), we need to add an extra
code segment to functions with open-coded defers that simply calls deferreturn()
and returns. This segment is not reachable by the normal function, but is returned
to by the runtime during recovery. We set the liveness information of this
deferreturn() to be the same as the liveness at the first function call during the
last defer exit code (so all return values and all stack slots needed by the defer
calls will be live).
I needed to increase the stackguard constant from 880 to 896, because of a small
amount of new code in deferreturn().
The -N flag disables open-coded defers. '-d defer' prints out the kind of defer
being used at each defer statement (heap-allocated, stack-allocated, or
open-coded).
Cost of defer statement [ go test -run NONE -bench BenchmarkDefer$ runtime ]
With normal (stack-allocated) defers only: 35.4 ns/op
With open-coded defers: 5.6 ns/op
Cost of function call alone (remove defer keyword): 4.4 ns/op
Text size increase (including funcdata) for go cmd without/with open-coded defers: 0.09%
The average size increase (including funcdata) for only the functions that use
open-coded defers is 1.1%.
The cost of a panic followed by a recover got noticeably slower, since panic
processing now requires a scan of the stack for open-coded defer frames. This scan
is required, even if no frames are using open-coded defers:
Cost of panic and recover [ go test -run NONE -bench BenchmarkPanicRecover runtime ]
Without open-coded defers: 62.0 ns/op
With open-coded defers: 255 ns/op
A CGO Go-to-C-to-Go benchmark got noticeably faster because of open-coded defers:
CGO Go-to-C-to-Go benchmark [cd misc/cgo/test; go test -run NONE -bench BenchmarkCGoCallback ]
Without open-coded defers: 443 ns/op
With open-coded defers: 347 ns/op
Updates #14939 (defer performance)
Updates #34481 (design doc)
Change-Id: I51a389860b9676cfa1b84722f5fb84d3c4ee9e28
Reviewed-on: https://go-review.googlesource.com/c/go/+/190098
Reviewed-by: Austin Clements <austin@google.com>
Switch the default to new object files.
Internal linking cgo is disabled for now, as it does not work yet
in newobj mode.
Shared libraries are also broken.
Disable some tests that are known broken for now.
Change-Id: I8ca74793423861d607a2aa7b0d89a4f4d4ca7671
Reviewed-on: https://go-review.googlesource.com/c/go/+/200161
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
The Go spec requires
If a deferred function value evaluates to nil, execution
panics when the function is invoked, not when the "defer"
statement is executed.
On Wasm and AIX, currently we actually emit a nil check at the
point of defer statement, which will make it panic too early.
This CL fixes this.
Also, on Wasm, now the nil function will be passed through
deferreturn to jmpdefer, which does an explicit nil check and
calls sigpanic if it is nil. This sigpanic, being called from
assembly, is ABI0. So change the assembler backend to also
handle sigpanic in ABI0.
Fixes#34926.
Updates #8047.
Change-Id: I28489a571cee36d2aef041f917b8cfdc31d557d4
Reviewed-on: https://go-review.googlesource.com/c/go/+/201297
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When a subsequent load/store of a ptr makes the nil check of that pointer
unnecessary, if their lines differ, change the line of the load/store
to that of the nilcheck, and attempt to rehome the load/store position
instead.
This fix makes profiling less accurate in order to make panics more
informative.
Fixes#33724
Change-Id: Ib9afaac12fe0d0320aea1bf493617facc34034b3
Reviewed-on: https://go-review.googlesource.com/c/go/+/200197
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Add to the testcase originally created for issue 34577 so
as to also trigger the error condition for issue 34852 (the
two bugs are closely related).
Updates #34577.
Updates #34852.
Change-Id: I2347369652ce500184347606b2bb3e76d802b204
Reviewed-on: https://go-review.googlesource.com/c/go/+/201017
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When assessing whether A <= B, the poset's OrderedOrEqual has a passing
condition which permits A <= B, but is not sufficient to infer that A <= B.
This CL removes that incorrect passing condition.
Having identified that A and B are in the poset, the method will report that
A <= B if any of these three conditions are true:
(1) A and B are the same node in the poset.
- This means we know that A == B.
(2) There is a directed path, strict or not, from A -> B
- This means we know that, at least, A <= B, but A < B is possible.
(3) There is a directed path from B -> A, AND that path has no strict edges.
- This means we know that B <= A, but do not know that B < A.
In condition (3), we do not have enough information to say that A <= B, rather
we only know that B == A (which satisfies A <= B) is possible. The way I
understand it, a strict edge shows a known, strictly-ordered relation (<) but
the lack of a strict edge does not show the lack of a strictly-ordered relation.
The difference is highlighted by the example in #34802, where a bounds check is
incorrectly removed by prove, such that negative indexes into a slice
succeed:
n := make([]int, 1)
for i := -1; i <= 0; i++ {
fmt.Printf("i is %d\n", i)
n[i] = 1 // No Bounds check, program runs, assignment to n[-1] succeeds!!
}
When prove is checking the negative/failed branch from the bounds check at n[i],
in the signed domain we learn (0 > i || i >= len(n)). Because prove can't learn
the OR condition, we check whether we know that i is non-negative so we can
learn something, namely that i >= len(n). Prove uses the poset to check whether
we know that i is non-negative. At this point the poset holds the following
relations as a directed graph:
-1 <= i <= 0
-1 < 0
In poset.OrderedOrEqual, we are testing for 0 <= i. In this case, condition (3)
above is true because there is a non-strict path from i -> 0, and that path
does NOT have any strict edges. Because this condition is true, the poset
reports to prove that i is known to be >= 0. Knowing, incorrectly, that i >= 0,
prove learns from the failed bounds check that i >= len(n) in the signed domain.
When the slice, n, was created, prove learned that len(n) == 1. Because i is
also the induction variable for the loop, upon entering the loop, prove previously
learned that i is in [-1,0]. So when prove attempts to learn from the failed
bounds check, it finds the new fact, i > len(n), unsatisfiable given that it
previously learned that i <= 0 and len(n) = 1.
Fixes#34802
Change-Id: I235f4224bef97700c3aa5c01edcc595eb9f13afc
Reviewed-on: https://go-review.googlesource.com/c/go/+/200759
Run-TryBot: Zach Jones <zachj1@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Keith Randall <khr@golang.org>
Increases the exec timeout from 5sec to 1min, but
also print out the error value on any test failure.
Fixes#34836
Change-Id: Ida2b8bd460243491ef0f90dfe0f978dfe02a0703
Reviewed-on: https://go-review.googlesource.com/c/go/+/200519
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Test case with code that caused a gccgo error while emitting export
data for an inlinable function.
Updates #34577.
Change-Id: I28b598c4c893c77f4a76bb4f2d27e5b42f702992
Reviewed-on: https://go-review.googlesource.com/c/go/+/198057
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, escape analysis is able to record at most one dereference
when a parameter leaks to the heap; that is, at call sites, it can't
distinguish between any of these three functions:
func x1(p ****int) { sink = *p }
func x2(p ****int) { sink = **p }
func x3(p ****int) { sink = ***p }
Similarly, it's limited to recording parameter leaks to only the first
4 parameters, and only up to 6 dereferences.
All of these limitations are due to the awkward encoding scheme used
at the moment.
This CL replaces the encoding scheme with a simple [8]uint8 array,
which can handle up to the first 7 parameters, and up to 254
dereferences, which ought to be enough for anyone. And if not, it's
much more easily increased.
Shrinks export data size geometric mean for Kubernetes by 0.07%.
Fixes#33981.
Change-Id: I10a94b9accac9a0c91490e0d6d458316f5ca1e13
Reviewed-on: https://go-review.googlesource.com/c/go/+/197680
Reviewed-by: Cherry Zhang <cherryyz@google.com>
CL 170950 had a regression that makes the compiler produce
an invalid wasm binary if the data section is too large.
Loading such a binary gives the following error:
"LinkError: WebAssembly.instantiate(): data segment is out of bounds"
This change fixes the issue by ensuring that the minimum size of the
linear memory is larger than the end of the data section.
Fixes#34395.
Change-Id: I0c8629de7ffd0d85895ad31bf8c9d45fef197a57
Reviewed-on: https://go-review.googlesource.com/c/go/+/199358
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We're allowed to remove a write barrier when both the old
value in memory and the new value we're writing are not heap pointers.
Improve both those checks a little bit.
A pointer is known to not be a heap pointer if it is read from
read-only memory. This sometimes happens for loads of pointers
from string constants in read-only memory.
Do a better job of tracking which parts of memory are known to be
zero. Before we just kept track of a range of offsets in the most
recently allocated object. For code that initializes the new object's
fields in a nonstandard order, that tracking is imprecise. Instead,
keep a bit map of the first 64 words of that object, so we can track
precisely what we know to be zeroed.
The new scheme is only precise up to the first 512 bytes of the object.
After that, we'll use write barriers unnecessarily. Hopefully most
initializers of large objects will use typedmemmove, which does only one
write barrier check for the whole initialization.
Fixes#34723
Update #21561
Change-Id: Idf6e1b7d525042fb67961302d4fc6f941393cac8
Reviewed-on: https://go-review.googlesource.com/c/go/+/199558
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
For commuting ops, check whether the second argument is dead before
checking if the first argument is rematerializeable. Reusing the register
holding a dead value is always best.
Fixes#33580
Change-Id: I7372cfc03d514e6774d2d9cc727a3e6bf6ce2657
Reviewed-on: https://go-review.googlesource.com/c/go/+/199559
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
CL 188317 introduced a compiler crash during dwarf generation which
was reported as Issue #34520. After CL 188217, the issue appears to be
fixed. Add a testcase to avoid future regressions.
Fixes#34520
Change-Id: I73544a9e9baf8dbfb85c19eb6d202beea05affb6
Reviewed-on: https://go-review.googlesource.com/c/go/+/198546
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Nilcheck would move statements from NilCheck values to others that
turned out were already dead, which leads to lost statements. Better
to eliminate the dead code first.
One "error" is removed from test/prove.go because the code is
actually dead, and the additional deadcode pass removes it before
prove can run.
Change-Id: If75926ca1acbb59c7ab9c8ef14d60a02a0a94f8b
Reviewed-on: https://go-review.googlesource.com/c/go/+/198479
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
During package initialization, the compiler tries to optimize:
var A = "foo"
var B = A
into
var A = "foo"
var B = "foo"
so that we can statically initialize both A and B and skip emitting
dynamic initialization code to assign "B = A".
However, this isn't safe in the presence of cmd/link's -X flag, which
might overwrite an initialized string-typed variable at link time. In
particular, if cmd/link changes A's static initialization, it won't
know it also needs to change B's static initialization.
To address this, this CL disables this optimization for string-typed
variables.
Fixes#34675.
Change-Id: I1c18f3b855f6d7114aeb39f96aaaf1b452b88236
Reviewed-on: https://go-review.googlesource.com/c/go/+/198657
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
By lazily starting the signal watch loop only on Notify,
we are able to have deadlock detection even when
"os/signal" is imported.
Thanks to Ian Lance Taylor for the solution and discussion.
With this change in, fix a runtime gorountine count test that
assumed that os/signal.init would unconditionally start the
signal watching goroutine, but alas no more.
Fixes#21576.
Change-Id: I6eecf82a887f59f2ec8897f1bcd67ca311ca42ff
Reviewed-on: https://go-review.googlesource.com/c/go/+/101036
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
ORUNESTR represents the special case of integer->string conversion. If
the integer is a constant, then the string is a constant too, so
evconst needs to perform constant folding here.
Passes toolstash-check.
Fixes#34563.
Change-Id: Ieab3d76794d8ce570106b6b707a4bcd725d156e9
Reviewed-on: https://go-review.googlesource.com/c/go/+/197677
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
