This test fails frequently in the longtest builder, and the failures
on the build dashboard have masked two other regressions so far.
Let's skip it until it can be fixed.
Updates #31263
Change-Id: I82bae216ebc3c5fd395c27c72c196334a130af7d
Reviewed-on: https://go-review.googlesource.com/c/go/+/172423
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
There is a DNS resolution issue in Kubernetes (UDP response packets get dropped due to a race in conntrack between the parallel A and AAAA queries, causing timeouts in DNS queries).
A workaround is to enable single-request / single-request-reopen in resolv.conf in order to use sequential A and AAAA queries instead of parallel queries.
With this PR, the pure Go resolver searches for "single-request" and "single-request-reopen" in resolv.conf and send A and AAAA queries sequentially when found.
Fixes#29644
Change-Id: I906b3484008c1b9adf2e3e9241ea23767e29df59
GitHub-Last-Rev: d481acfb4c
GitHub-Pull-Request: golang/go#29661
Reviewed-on: https://go-review.googlesource.com/c/go/+/157377
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Writev was allocating a new []syscall.Iovec every call, rather than
reusing the cached copy available at *fd.iovec.
Fixes#26663.
Change-Id: I5967b0d82dc671ce0eaf4ec36cc2a0e46eadde02
Reviewed-on: https://go-review.googlesource.com/c/go/+/172419
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The CBC mode ciphers in TLS are a disaster. By ordering authentication
and encryption wrong, they are very subtly dependent on details and
implementation of the padding check, admitting attacks such as POODLE
and Lucky13.
crypto/tls does not promise full countermeasures for Lucky13 and still
contains some timing variations. This change fixes one of the easy ones:
by checking the MAC, then the padding, rather than all at once, there is
a very small timing variation between bad MAC and (good MAC, bad
padding).
The consequences depend on the effective padding value used in the MAC
when the padding is bad. extractPadding simply uses the last byte's
value, leaving the padding bytes effectively unchecked. This is the
scenario in SSL 3.0 that led to POODLE. Specifically, the attacker can
take an input record which uses 16 bytes of padding (a full block) and
replace the final block with some interesting block. The MAC check will
succeed with 1/256 probability due to the final byte being 16. This
again means that after 256 queries, the attacker can decrypt one byte.
To fix this, bitwise AND the two values so they may be checked with one
branch. Additionally, zero the padding if the padding check failed, to
make things more robust.
Updates #27071
Change-Id: I332b14d215078928ffafe3cfeba1a68189f08db3
Reviewed-on: https://go-review.googlesource.com/c/go/+/170701
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Though there is variation in the spelling of canceled,
cancellation is always spelled with a double l.
Reference: https://www.grammarly.com/blog/canceled-vs-cancelled/
Change-Id: I240f1a297776c8e27e74f3eca566d2bc4c856f2f
Reviewed-on: https://go-review.googlesource.com/c/go/+/170060
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Same as CL 170323, but for s390x instead of wasm.
Fixes#31495.
Change-Id: Ie39f649f5e33690375a8bcb1bc3b92d912ca4398
Reviewed-on: https://go-review.googlesource.com/c/go/+/172417
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In typecheckclosure, a xfunc node will be put to xtop. But that node can
be shared between multiple closures, like in a const declaration group:
const (
x = unsafe.Sizeof(func() {})
y
)
It makes a xfunc node appears multiple times in xtop, causing duplicate
initLSym run.
To fix this issue, we only do typecheck for xfunc one time, and setup
closure node earlier in typecheckclosure process.
Fixes#30709
Change-Id: Ic924a157ee9f3e5d776214bef5390849ddc8aab9
Reviewed-on: https://go-review.googlesource.com/c/go/+/172298
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When we construct the build list by loading packages (e.g., in
"go build", "go list", or "go test"), we may load additional modules
not mentioned in the original build list. If we encounter an error
loading one of these modules, mvs.BuildList currently returns a
BuildListError with a chain of requirments. Unfortunately, this is not
helpful, since the graph is structured such that these missing modules
are direct requirements of the main module.
With this change, loader.load keeps track of the package that caused
each "missing" module to be added. If an error occurs in a missing
module, the chain of package imports is printed instead of the module
requirements.
Fixes#31475
Change-Id: Ie484814af42ceea3e85fedc38e705ba3a38cd495
Reviewed-on: https://go-review.googlesource.com/c/go/+/171859
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
mvs.BuildList reports errors with a chain of modules to make it
clear why the module where the error occurred was part of the
build. This is a little confusing with "go get -u" since there are
edges in the module graph for requirements and for updates.
With this change, we now print "requires" or "updates to" between
each module version in the chain.
Updates #30661
Change-Id: Ie689500ea86857e715b250b9e0cae0bc6686dc32
Reviewed-on: https://go-review.googlesource.com/c/go/+/171150
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
For example, "go get golang.org/x/tools/cmd/..." will add a
requirement for "golang.org/x/tools" to go.mod and will install
executables from the "cmd" subdirectory.
Fixes#29363
Change-Id: Id53f051710708d7760ffe831d4274fd54533d2b7
Reviewed-on: https://go-review.googlesource.com/c/go/+/171138
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This fix removes the special case of auto-deriving the module path
only for VCS github.com. Error message now explicitly requests
the module path. Documentation and its FAQ do not need an update
as only the beginning of the message is mentioned and is not modified.
Fixes#27951
Change-Id: Icaf87a38b5c58451edba9beaa12ae9a68e288ca1
Reviewed-on: https://go-review.googlesource.com/c/go/+/172019
Reviewed-by: Daniel Lublin <daniel@lublin.se>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
RELNOTE=yes
The new escape analysis pass is more precise, which for most Go code
should be an improvement. However, it may also break code that
happened to work before (e.g., code that violated the unsafe.Pointer
safety rules).
The old escape analysis pass can be re-enabled with "go build
-gcflags=all=-newescape=false". N.B., it's NOT recommended to mix the
old and new escape analysis passes such as by omitting "all=". While
the old and new escape analysis passes use similar and mostly
compatible metadata, there are cases (e.g., closure handling) where
they semantically differ and could lead to memory corruption errors in
compiled programs.
Fixes#23109.
Change-Id: I0b1b6a6de5e240cb30c87a165f47bb8795491158
Reviewed-on: https://go-review.googlesource.com/c/go/+/170448
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This change modifies cmd/go/list to format the error correctly in case
-e flag is set. It also fixes a bug where the package loader was only
ever checking the first pattern if it had the go extension. This caused
and error when a file without .go extension was not the first argument.
Fixes#29899
Change-Id: I029bf4465ad4ad054434b8337c1d2a59369783da
Reviewed-on: https://go-review.googlesource.com/c/go/+/166398
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
On some configurations of Windows, directories containing executable
files may be locked for a while after the executable exits (perhaps
due to antivirus scans?). It's probably worth a little extra latency
on exit to avoid filling up the user's temporary directory with leaked
files.
Updates #30789
Change-Id: Iae7fcdd07fb9ecfb05967cfe0c8833db646d2f85
Reviewed-on: https://go-review.googlesource.com/c/go/+/172337
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Transport.DialerAndTLSConfigSupportsHTTP2 was added just earlier
in CL 130256 but we thought of a better name moments after submitting.
ForceAttemptHTTP2 is shorter, more direct, and doesn't constrain what
we can use it with in the future.
Updates #14391
Updates #27011
Change-Id: Ie5fc71bafcbcaa1941b5d49f748b6d710503d477
Reviewed-on: https://go-review.googlesource.com/c/go/+/172299
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Dirent doesn't work properly. Diable the test for now.
Update #31416
Change-Id: I34a8045598a9c303dcc754ce04da3c124f122d1a
Reviewed-on: https://go-review.googlesource.com/c/go/+/171818
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The new escape analysis implementation tries to emit debugging
diagnostics that are compatible with the existing implementation, but
there's a handful of cases that are easier to handle by updating the
test expectations instead.
For regress tests that need updating, the original file is copied to
oldescapeXXX.go.go with -newescape=false added to the //errorcheck
line, while the file is updated in place with -newescape=true and new
test requirements.
Notable test changes:
1) escape_because.go looks for a lot of detailed internal debugging
messages that are fairly particular to how esc.go works and that I
haven't attempted to port over to escape.go yet.
2) There are a lot of "leaking param: x to result ~r1 level=-1"
messages for code like
func(p *int) *T { return &T{p} }
that were simply wrong. Here &T must be heap allocated unconditionally
(because it's being returned); and since p is stored into it, p
escapes unconditionally too. esc.go incorrectly reports that p escapes
conditionally only if the returned pointer escaped.
3) esc.go used to print each "leaking param" analysis result as it
discovered them, which could lead to redundant messages (e.g., that a
param leaks at level=0 and level=1). escape.go instead prints
everything at the end, once it knows the shortest path to each sink.
4) esc.go didn't precisely model direct-interface types, resulting in
some values unnecessarily escaping to the heap when stored into
non-escaping interface values.
5) For functions written in assembly, esc.go only printed "does not
escape" messages, whereas escape.go prints "does not escape" or
"leaking param" as appropriate, consistent with the behavior for
functions written in Go.
6) 12 tests included "BAD" annotations identifying cases where esc.go
was unnecessarily heap allocating something. These are all fixed by
escape.go.
Updates #23109.
Change-Id: Iabc9eb14c94c9cadde3b183478d1fd54f013502f
Reviewed-on: https://go-review.googlesource.com/c/go/+/170447
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Even when a custom TLS config or custom dialer is specified,
enables HTTP/2 if DialerAndTLSConfigSupportsHTTP2 is true.
By this change, avoid automatically enabling HTTP/2 if DialContext is set.
This change also ensures that DefaultTransport still automatically
enable HTTP/2 as discussed in #14391.
Updates #14391Fixes#27011
Change-Id: Icc46416810bee61dbd65ebc96468335030b80573
Reviewed-on: https://go-review.googlesource.com/c/go/+/130256
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Kunpei Sakai <namusyaka@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Mnemonics for these instructions were added to the assembler in
CL 159357.
Change-Id: Ie11c45ecc9cead9a8850fcc929b0211cfd980fe5
Reviewed-on: https://go-review.googlesource.com/c/go/+/160157
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Only invoke adb for android if we're not running on android already.
Change-Id: I4eb94286a5bf09b382716a0474f3aebec40f5d74
Reviewed-on: https://go-review.googlesource.com/c/go/+/170953
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
sigaction is called as part of library mode initializers
(_rt0_*_lib). Sigaction in turn calls getg, but on Android the TLS
offset for g has not been initialized and getg might return garbage.
Add a check for initialization before calling getg.
Fixes the golang.org/x/mobile/bind/java tests on amd64 and 386.
Fixes#31476
Change-Id: Id2c41fdc983239eca039b49a54b8853c5669d127
Reviewed-on: https://go-review.googlesource.com/c/go/+/172158
Reviewed-by: Ian Lance Taylor <iant@golang.org>
WebAssembly's memory is contiguous. Allocating memory at a high address
also allocates all memory up to that address. This change reduces
the initial memory allocated on wasm from 1GB to 16MB by using multiple
heap arenas and reducing the size of a heap arena.
Fixes#27462.
Change-Id: Ic941e6edcadd411e65a14cb2f9fd6c8eae02fc7a
Reviewed-on: https://go-review.googlesource.com/c/go/+/170950
Run-TryBot: Richard Musiol <neelance@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
A handful of packages were reimplementing IsExported, so use
token.IsExported instead. This caused the deps test to fail for net/rpc.
However, net/rpc deals with Go types, and go/token is light and fairly
low-level in terms of Go tooling packages, so that's okay.
While at it, replace all uses of ast.IsExported with token.IsExported.
This is more consistent, and also means that the import graphs are
leaner. A couple of files no longer need to import go/ast, for example.
We can't get rid of cmd/compile/internal/types.IsExported, as the
compiler can only depend on go/token as of Go 1.4. However, gc used
different implementations in a couple of places, so consolidate the use
of types.IsExported there.
Finally, we can't get rid of the copied IsExported implementation in
encoding/gob, as go/token depends on it as part of a test. That test
can't be an external test either, so there's no easy way to break the
import cycle.
Overall, this removes about forty lines of unnecessary code.
Change-Id: I86a475b7614261e6a7b0b153d5ca02b9f64a7b2d
Reviewed-on: https://go-review.googlesource.com/c/go/+/172037
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The AIX special handler which skips this test if unix network isn't
supported, doesn't need to be called inside the helper process.
Change-Id: I7ff2c4e6b20eceb977380294858cae63034ffe0d
Reviewed-on: https://go-review.googlesource.com/c/go/+/172160
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
This CL adds the following instructions, useful for shifting/rotating
and masking operations:
* RNSBG - rotate then and selected bits
* ROSBG - rotate then or selected bits
* RXSBG - rotate then exclusive or selected bits
* RISBG - rotate then insert selected bits
It also adds the 'T' (test), 'Z' (zero), 'H' (high), 'L' (low) and
'N' (no test) variants of these instructions as appropriate.
Operands are ordered as: I₃, I₄, I₅, R₂, R₁.
Key: I₃=start, I₄=end, I₅=amount, R₂=source, R₁=destination
Change-Id: I200d12287e1df7447f37f4919da5e9a93d27c792
Reviewed-on: https://go-review.googlesource.com/c/go/+/159357
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Allow up to 3 RestArgs arguments to be specified. This is needed to
for us to add the 'rotate and ... bits' instructions, which require
5 arguments, cleanly.
Change-Id: I76b89adfb5e3cd85a43023e412f0cc202d489e0b
Reviewed-on: https://go-review.googlesource.com/c/go/+/171726
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The param field isn't useful, we can just use REGSP instead.
Change-Id: I2ac68131c390209cc84e43aa7620ccbf5ae69120
Reviewed-on: https://go-review.googlesource.com/c/go/+/171725
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
For prose consistency with other documentation.
Change-Id: I1588fbe1feace2a97b02b20bba730ed730b84fa3
Reviewed-on: https://go-review.googlesource.com/c/go/+/171772
Run-TryBot: Ross Light <light@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Since golang.org/cl/32487, treecopy does not handle non-iota ONONAME and
iota ONONAME anymore.
Change-Id: Icd5a81333a0d4d04adef2dbc58db92ce67aa0860
Reviewed-on: https://go-review.googlesource.com/c/go/+/172038
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The existing pclntab construction took care to re-use strings:
filenames and fully qualified function names.
It did not try to deduplicate pctab information,
perhaps because the author assumed that there
wouldn't be much duplication.
This change introduces that deduplication.
The cache gets a 33% hit rate during make.bash.
This doesn't require any changes to the file format,
and shrinks binaries by about 1%.
Updates #6853
file before after Δ %
go 14659236 14515876 -143360 -0.978%
addr2line 4272424 4223272 -49152 -1.150%
api 6050808 5993464 -57344 -0.948%
asm 4906416 4869552 -36864 -0.751%
buildid 2861104 2824240 -36864 -1.288%
cgo 4859784 4810632 -49152 -1.011%
compile 25749656 25213080 -536576 -2.084%
cover 5286952 5229608 -57344 -1.085%
dist 3634192 3597328 -36864 -1.014%
doc 4691080 4641928 -49152 -1.048%
fix 3397960 3361096 -36864 -1.085%
link 6113568 6064432 -49136 -0.804%
nm 4221928 4172776 -49152 -1.164%
objdump 4636600 4587448 -49152 -1.060%
pack 2281184 2256608 -24576 -1.077%
pprof 14641204 14485556 -155648 -1.063%
test2json 2814536 2785864 -28672 -1.019%
trace 11602204 11487516 -114688 -0.989%
vet 8399528 8313512 -86016 -1.024%
Change-Id: I59c6aae522700a0d36ddd2cbca6e22ecdf17eea2
Reviewed-on: https://go-review.googlesource.com/c/go/+/172079
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Rearranged code slightly to make lifetime of underlying array of
pow5 more explicit in code.
Fixes#31184.
Change-Id: I063081f0e54097c499988d268a23813746592654
Reviewed-on: https://go-review.googlesource.com/c/go/+/170641
Reviewed-by: Filippo Valsorda <filippo@golang.org>
This CL adds a new escape analysis implementation, which can be
enabled through the -newescape compiler flag.
This implementation focuses on simplicity, but in the process ends up
using less memory, speeding up some compile-times, fixing memory
corruption issues, and overall significantly improving escape analysis
results.
Updates #23109.
Change-Id: I6176d9a7ae9d80adb0208d4112b8a1e1f4c9143a
Reviewed-on: https://go-review.googlesource.com/c/go/+/170322
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
On Ubuntu 18.04 I am seeing GDB fail to restore the stack pointer
during this test because stack unwinding can't find the PC. This CL
is essentially a partial revert of CL 23940 and fixes the issue on
s390x.
Change-Id: Ib4c41162dc85dc882eb6e248330f4082c3fa94c3
Reviewed-on: https://go-review.googlesource.com/c/go/+/169857
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
