The symbols for the actual data in a constant string or bytes literal should
be local.
Change-Id: Idafcfba9a638eaa4e460e5103d96843960559b35
Reviewed-on: https://go-review.googlesource.com/8772
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
This will fruitlessly rebuild stale packages that are in a shared
library.
Change-Id: I66a6e1adf7818558e7d1351ab215a5021b4a8a6b
Reviewed-on: https://go-review.googlesource.com/8333
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This will make it possible to access the gcimporter (and gccgoimporter,
eventually) from the forthcoming gc/importer package, without exposing
compiler names in package names.
This change was created by manually adjusting the gcimporter paths in
go/types.bash and then running sh go/types.bash (i.e., by revendoring
gcimporter). The only manual changes are in go/types.bash.
Change-Id: Idc282439742288c09caa58b3a66d77aec0325faf
Reviewed-on: https://go-review.googlesource.com/8764
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Issue 9483 suggests several approaches to correlating logs from
machines in different time zones. This approach is the simplest and
really should be sufficient: provide a way to clamp the time stamps
to UTC.
Fixes#9483.
Change-Id: If540b991d758c4d845a719779f8255ece7c452e7
Reviewed-on: https://go-review.googlesource.com/8761
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Jumping to an offset past a symbol isn't something that is really
supported by dynamic linkers, so do it by hand.
Change-Id: Ifff8834c6cdfa3d521ebd8479d2e93906df9b258
Reviewed-on: https://go-review.googlesource.com/8238
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Skip the test when there is no .gosymtab section in the executable
rather than crashing.
Change-Id: Ieb3df07e307f50c33cdafab38f9b5d1ac0e55c04
Reviewed-on: https://go-review.googlesource.com/5110
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
A similar fix was applied in 545686857b
but another instance of 'pc' was missed.
Also adds a test for the goroutine gdb command.
It currently uses goroutine 2 for the test, since goroutine 1 has
its stack pointer set to 0 for some reason.
Change-Id: I53ca22be6952f03a862edbdebd9b5c292e0853ae
Reviewed-on: https://go-review.googlesource.com/8729
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is a version of Time.Format that doesn't require allocation.
This is an updated version of 0af302f507
submitted by @bradfitz which was later rolled back.
Fixes#5192
Updates #5195
Change-Id: I4e6255bee1cf3914a6cc8d9d2a881cfeb273c08e
Reviewed-on: https://go-review.googlesource.com/1760
Reviewed-by: Rob Pike <r@golang.org>
Now that getg is an intrinsic, more runtime functions
gets inlined (in particular, LockOSThread).
Runtime code gets race instrumented after inlining into
other packages. This can lead to false positives,
as race detector ignores all internal synchronization in runtime.
Inling of LockOSThread lead to false race reports on m contents.
See the issue for an example.
Fixes#10380
Change-Id: Ic9b760b53c28c2350bc54a5d4677fcd1c1f86e5f
Reviewed-on: https://go-review.googlesource.com/8690
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, when allocation reaches the concurrent GC trigger size, we
start the concurrent collector by ready'ing its G. This simply puts it
on the end of the P's run queue, which means we may not actually start
GC for some time as the current G continues to run and then the P
drains other Gs already on its run queue. Since the mutator can
continue to allocate, the heap can potentially be much larger than we
intended by the time GC actually starts. Furthermore, how much larger
is difficult to predict since it depends on the scheduler.
Fix this by preempting the current G and switching directly to the
concurrent GC G as soon as we reach the trigger heap size.
On the garbage benchmark from the benchmarks subrepo with
GOMAXPROCS=4, this reduces the time from triggering the GC to the
beginning of sweep termination by 10 to 30 milliseconds, which reduces
allocation after the trigger by up to 10MB (a large fraction of the
64MB live heap the benchmark tries to maintain).
One other known source of delay before we "really" start GC is the
sweep finalization performed before sweep termination. This has
similar negative effects on heap size and predictability, but is an
orthogonal problem. This change adds a TODO for this.
Change-Id: I8bae98cb43685c1bf353ff55868e4647e3743c47
Reviewed-on: https://go-review.googlesource.com/8513
Reviewed-by: Rick Hudson <rlh@golang.org>
These were appropriate for STW GC, since it interrupted the allocating
Goroutine, but don't apply to concurrent GC, which runs on its own
Goroutine. Forced GC is still STW, but it makes sense to attribute the
GC to the goroutine that called runtime.GC().
Change-Id: If12418ca66dc7e53b8b16025af4e03adb5d9577e
Reviewed-on: https://go-review.googlesource.com/8715
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently, GC disables preemption between the traceGCStart and
traceGCDone, so it never moves Ps. Consequently, the trace verifier
attaches information about GC to its per-P state and will fail if GC
starts on one P and ends on another.
GC will soon be preemptible and may end on a different P than it
began. Hence, this change lifts this per-P verifier state to global
state.
Change-Id: I82256e2baab1ff3c4453fec312079018423b4b51
Reviewed-on: https://go-review.googlesource.com/8714
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Rick Hudson <rlh@golang.org>
exitsyscallfast checks for freezetheworld, but does so only by
checking if stopwait is positive. This can also happen during
stoptheworld, which is harmless, but confusing. Shortly, it will be
important that we get to the p.status cas even if stopwait is set.
Hence, make this test more specific so it only triggers with
freezetheworld and not other uses of stopwait.
Change-Id: Ibb722cd8360c3ed5a9654482519e3ceb87a8274d
Reviewed-on: https://go-review.googlesource.com/8205
Reviewed-by: Russ Cox <rsc@golang.org>
Currently, the only way to know the Go type of an attribute of some
DWARF attribute class was to read the dwarf package code (or
experiment). This makes it hard to go from the DWARF specification to
writing code that uses the dwarf package.
Fix this by adding a table to the documentation comment of the Field
type that gives the correspondence between DWARF attribute classes and
Go types.
Change-Id: I57c678a551fa1eb46f8207085d5a53d44985e3e7
Reviewed-on: https://go-review.googlesource.com/7280
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Nigel Tao <nigeltao@golang.org>
Fixes#10378
This is clumsy, but currently cover tool fails as:
$ go test -run=none -cover syscall
syscall_linux_amd64.go:15: can only use //go:noescape with external func implementations
FAIL syscall [build failed]
This happens because cover tool mishandles //go: comments.
r and gri said that fixing cover is infeasible due to go/ast limitations.
So at least fix the offending code so that coverage works.
This come up in context of coverage-guided fuzzing which works best
with program-wide coverage.
Change-Id: I142e5774c9f326ed38cb202693bd4edae93879ba
Reviewed-on: https://go-review.googlesource.com/8723
Reviewed-by: Rob Pike <r@golang.org>
The flag updates error annotations in test files from actual compiler output.
This is useful when doing compiler changes that add/remove/change lots of errors,
or when adding lots of new tests.
Also I noticed at least 2 cases where annotation were sub-optimal:
1. The annotation was "leaking param p" when the actual error is
"leaking param p to result ~r1".
2. The annotation was "leaking param m" when the actual errors
are "leaking param m" and "leaking param mv1".
For now it works only for errorcheck mode.
Also, apply the update to escape and liveness tests.
Some files have gccgo-specific errors of the form "gc error|gccgo error",
so it is risky to run update on all files. Gccgo-specific error
does not necessary contain '|', it can be just truncated.
Change-Id: Iaaae767f859dcb8321a8cb4970b2b70969e8a345
Reviewed-on: https://go-review.googlesource.com/5310
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Remove the "netaddr" type, which ambiguously represented either one
address, or a list of addresses. Instead, use "addrList" wherever
multiple addresses are supported.
The "first" method returns the first address matching some condition
(e.g. "is it IPv4?"), primarily to support legacy code that can't handle
multiple addresses.
The "partition" method splits an addrList into two categories, as
defined by some strategy function. This is useful for implementing
Happy Eyeballs, and similar two-channel algorithms.
Finally, internetAddrList (formerly resolveInternetAddr) no longer
mangles the ordering defined by getaddrinfo. In the future, this may
be used by a sequential Dial implementation.
Updates #8453, #8455.
Change-Id: I7375f4c34481580ab40e31d33002a4073a0474f3
Reviewed-on: https://go-review.googlesource.com/8360
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Update #9855
In preparation for introducing direct use of a zero register on
platforms that support it, take the opportunity to clean up
Componentgen a bit.
Change-Id: I120ce1ffcca8c4f7603bfe76bfa1aedd27ebb4d2
Reviewed-on: https://go-review.googlesource.com/8691
Run-TryBot: Dave Cheney <dave@cheney.net>
Reviewed-by: Minux Ma <minux@golang.org>
'themoduledata' doesn't really make sense now we support multiple moduledata
objects.
Change-Id: I8263045d8f62a42cb523502b37289b0fba054f62
Reviewed-on: https://go-review.googlesource.com/8521
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If GOBIN is not empty the build moves the go executable
to a new path. When this test runs it fails to find the
go cmd in the GOROOT.
Change-Id: I100def0fbcb9691b13776f795b1d1725e36d8102
Reviewed-on: https://go-review.googlesource.com/8735
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This changes all the places that consult themoduledata to consult a
linked list of moduledata objects, as will be necessary for
-linkshared to work.
Obviously, as there is as yet no way of adding moduledata objects to
this list, all this change achieves right now is wasting a few
instructions here and there.
Change-Id: I397af7f60d0849b76aaccedf72238fe664867051
Reviewed-on: https://go-review.googlesource.com/8231
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Modelled somewhat on the -race support.
Change-Id: I137037addfc76341f7deb216776fdd18e9af9fe5
Reviewed-on: https://go-review.googlesource.com/8680
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, the initial heap size reported in the gctrace line is the
heap_live right before sweep termination. However, we triggered GC
when heap_live reached next_gc, and there may have been significant
allocation between that point and the beginning of sweep
termination. Ideally these would be essentially the same, but
currently there's scheduler delay when readying the GC goroutine as
well as delay from background sweep finalization.
We should fix this delay, but in the mean time, to give the user a
better idea of how much the heap grew during the whole of garbage
collection, report the trigger rather than what the heap size happened
to be after the garbage collector finished rolling out of bed. This
will also be more useful for heap growth plots.
Change-Id: I08476b9fbcfb2de90592405e9c9f434dfb9eb1f8
Reviewed-on: https://go-review.googlesource.com/8512
Reviewed-by: Rick Hudson <rlh@golang.org>
According to Go execution modes, a Go program compiled with
-buildmode=c-archive has a main function, but it is ignored on run.
This gives the runtime the information it needs not to run the main.
I have this working with pending linker changes on darwin/amd64.
Change-Id: I49bd7d65aa619ec847c464a872afa5deea7d4d30
Reviewed-on: https://go-review.googlesource.com/8701
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Print("") was printing a header but no line.
Fixes#9665.
Change-Id: Iac783187786065e1389ad6e8d7ef02c579ed7bd8
Reviewed-on: https://go-review.googlesource.com/8665
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also unify the tests where possible to make it easy to add more.
Fixes#10273.
Change-Id: Idfa4f4a5dcaa05974066bafe17bed6cdd2ebedb7
Reviewed-on: https://go-review.googlesource.com/8662
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Add arm64 assembly implementation of runtime.cmpstring and bytes.Compare.
benchmark old ns/op new ns/op delta
BenchmarkCompareBytesEqual 98.0 27.5 -71.94%
BenchmarkCompareBytesToNil 9.38 10.0 +6.61%
BenchmarkCompareBytesEmpty 13.3 10.0 -24.81%
BenchmarkCompareBytesIdentical 98.0 27.5 -71.94%
BenchmarkCompareBytesSameLength 43.3 16.3 -62.36%
BenchmarkCompareBytesDifferentLength 43.4 16.3 -62.44%
BenchmarkCompareBytesBigUnaligned 6979680 1360979 -80.50%
BenchmarkCompareBytesBig 6915995 1381979 -80.02%
BenchmarkCompareBytesBigIdentical 6781440 1327304 -80.43%
benchmark old MB/s new MB/s speedup
BenchmarkCompareBytesBigUnaligned 150.23 770.46 5.13x
BenchmarkCompareBytesBig 151.62 758.76 5.00x
BenchmarkCompareBytesBigIdentical 154.63 790.01 5.11x
* note, the machine we are benchmarking on has some issues. What is clear is
compared to a few days ago the old MB/s value has increased from ~115 to 150.
I'm less certain about the new MB/s number, which used to be close to 1Gb/s.
Change-Id: I4f31b2c7a06296e13912aacc958525632cb0450d
Reviewed-on: https://go-review.googlesource.com/8541
Reviewed-by: Aram Hăvărneanu <aram@mgk.ro>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
There was a logical race in Transport.RoundTrip where a roundtrip with
a pending response would race with the channel for the connection
closing. This usually happened for responses with connection: close
and no body.
We handled this race by reading the close channel, setting a timer
for 100ms and if no response was returned before then, we would then
return an error.
This put a lower bound on how fast a connection could fail. We couldn't
fail a request faster than 100ms.
Reordering the channel operations gets rid of the logical race. If
the readLoop causes the connection to be closed, it would have put
its response into the return channel already and we can fetch it with
a non-blocking receive.
Change-Id: Idf09e48d7a0453d7de0120d3055d0ce5893a5428
Reviewed-on: https://go-review.googlesource.com/1787
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The API call will fail when Bitbucket repositories are private. In
that case, probe for the repository using vcsCmd.ping.
Fixes#5375
Change-Id: Ia604ecf9014805579dfda4b5c8e627a52783d56e
Reviewed-on: https://go-review.googlesource.com/1910
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Mainly it is simple copy. But I had to change amd64
lastcontinuehandler return value from uint32 to int32.
I don't remember how it happened to be uint32, but new
int32 is matching better with Windows documentation (LONG).
I don't think it matters one way or the others.
Change-Id: I6935224a2470ad6301e27590f2baa86c13bbe8d5
Reviewed-on: https://go-review.googlesource.com/8686
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This update makes maxBacktrackLen return 0 if
len(prog.Inst) > maxBacktrackProg. This prevents an attempt to
backtrack against a nil bitstate.
Fixes#10319
Change-Id: Icdbeb2392782ccf66f9d0a70ea57af22fb93f01b
Reviewed-on: https://go-review.googlesource.com/8473
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When making a request to an IPv6 address with a zone identifier, for
exmaple [fe80::1%en0], RFC 6874 says HTTP clients must remove the zone
identifier "%en0" before writing the request for security reason.
This change removes any IPv6 zone identifer attached to URI in the Host
header field in requests.
Fixes#9544.
Change-Id: I7406bd0aa961d260d96f1f887c2e45854e921452
Reviewed-on: https://go-review.googlesource.com/3111
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Rename now uses MoveFileEx which was previously not available to
use because it is not supported on Windows 2000.
Change-Id: I583d029c4467c9be6d1574a790c423559b441e87
Reviewed-on: https://go-review.googlesource.com/6140
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
