Scan most sources, including GOPATH, the module cache, the main module,
and replace targets as appropriate. Use the cached stdlib instead of
scanning GOROOT.
We heavily cache the contents of the module cache, so performance is
decent. But we have to look at all the modules not in the module cache
too to get the right versions of modules (see
(*ModuleResolver).canonicalize), which currently isn't cached at all,
even just for a single run. That ends up being pretty expensive.
The implementation changes are relatively small; add package name
loading to scan(), cache that result, and allow callers to control what
directories are scanned so that it can skip GOROOT.
I also cleared out most of the stdlib from the unimported completion
test and added a simple external completion to it for safety's sake.
Change-Id: Id50fd4703b1126be35a000fe90719e19c3ab84bf
Reviewed-on: https://go-review.googlesource.com/c/tools/+/199178
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
There was a regression where gopls would not type-check any package with
a bad import. This change fixes the regression and adds a test to make
sure it doesn't happen again.
Change-Id: I3acf0917d46e9444c20135559f057f0ecd20e15b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/201539
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This allows us to run a single failing test easily when we need.
It also improves the ability to determine which test fails.
Change-Id: I400212d8c4d8c1f97059260add635ce2015990a1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/197737
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The loops are common to all the testing layers, so lift them.
This prepares for more test improvements, without any funcitonal changes.
Change-Id: Ib750c8a7bb4c424a185cb0bd841674a69db1385b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/197717
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This makes it much easier to keep them up to date.
It is also less fragile against accidental changes.
Change-Id: If119f8527c0896d210650859960e77f3e0fa5a99
Reviewed-on: https://go-review.googlesource.com/c/tools/+/197505
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
In CL 192137 deep fuzzy matching was enabled by default. We also have
options independent options "deepCompletion" and "fuzzyMatching" to
control this. When fuzzy matching is disabled, case insensitive prefix
matching is used.
Provide an option, "caseSensitiveCompletion", which allows for case
sensitive prefix matching when fuzzy matching is disabled.
Change-Id: I17c8fa310b2ef79e36cc2f7303e98870690b5903
Reviewed-on: https://go-review.googlesource.com/c/tools/+/194757
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Now we always expect type names inside of *ast.FieldList. This expands
the previous func signature logic to also work for *ast.StructType
and *ast.InterfaceType. For example, we will now prefer type names in
cases like:
type myStruct struct { i i<> }
Also, fix a check for anonymous fields to make sure the field is
actually embedded. This fixes cases like this to properly have no
completions:
type myStruct struct { i<> i }
where this will still give type name completions:
type myStruct struct { i<> }
I introduced a new error type source.ErrIsDefinition so source_test.go
could avoid erroring out on tests that make sure definition
identifiers have no completions.
Fixesgolang/go#34412.
Change-Id: Ib56cb52af639f2e2b132274d1f04f8074c0d9353
Reviewed-on: https://go-review.googlesource.com/c/tools/+/196560
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Fix objects defined in the function signature to only be completable
inside the function body. For example:
func (dog Dog) bark(d<>) { // Don't complete <> to "dog".
d<> // Do complete <> to "dog".
}
Change-Id: Ic9a2dc2ce6771212780f2d6af2221a67d203f35f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/196559
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
source.DiagnosticSeverity and source.CompletionItemKind are duplicated
and not worth maintaining.
Change-Id: I8d6c8621a227855309c0977da59d8c9fa53617bf
Reviewed-on: https://go-review.googlesource.com/c/tools/+/197177
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Normally you don't want literal candidates for basic types (e.g.
"int(0)") since you can type the literal value without the type name.
One exception is if you are creating a named basic type that
implements an interface. For example:
http.Handle("/", http.FileServer(<>))
will now give "http.Dir()" as a candidate since http.Dir is a named
string type that implements the required interface http.FileSystem.
Change-Id: Id2470c45e469ea25cd0f9849cfdad19ac0e784bb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/195838
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Suggested fixes was totally broken (invalid command) and many others were not in
correct sorted order.
There were lots of golden entries that were no longer used.
The regeneration script itself was broken
The definition tests are skipped, so the entries were not regenerated.
Files must have been hand edited, we probably need to document how to generate
them somewhere.
Change-Id: I1c021aeadd81f08f4572c2124f0c61912a3cd89e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/196987
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Instead of relying on the diagnostics cached on the package, use the
diagnostics sent by the code action when computing suggested fixes.
Change-Id: I77f7fd468b34b824c6c5000a51edbe0f8cc6f637
Reviewed-on: https://go-review.googlesource.com/c/tools/+/197097
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Our completion tests check for a lot of different behaviors. It may be
easier to develop if we have separate tests for things like deep
completion and completion snippets.
Change-Id: I7f4b0c0e52670f2a6c00247199933fd1ffa0096f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/196021
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
We were recursing infinitely in cases like this:
switch true {
case true:
go foo.F<>
}
There were three things that came together to cause this:
1. We recently starting recursively fixing broken go/defer statements.
2. In this case we were failing to swap in the correct ast.Node in for
the *ast.BadStmt because we were only looking
for *ast.BlockStmt (and *ast.CaseStmt has no block).
3. After 2), we weren't returning an error so the fix() code thought
it should recurse.
Fix 2) by using reflection to swap AST nodes in a generic way. Perhaps
a bit overkill in this case, but I happened to have already written
this for an upcoming change, so I just pulled it in to fix this bug.
Fix 3) by returning an error if we fail to swap the AST nodes.
Fixesgolang/go#34353.
Change-Id: I17ff1afd52ae165c0ba9de5820dcec4cb7d756cb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/196137
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Now we will offer function literal completions when we know the
expected type is a function. For example:
sort.Slice(someSlice, <>)
will offer the completion "func(...) {}" which if selected will
insert:
func(i, j int) bool {<>}
I opted to use an abbreviated label "func(...) {}" because function
signatures can be quite long/verbose with all the type names in there.
The only interesting challenge is how to handle signatures that don't
name the parameters. For example,
func HandleFunc(pattern string, handler func(ResponseWriter, *Request)) {
does not name the "ResponseWriter" and "Request" parameters. I went
with a minimal effort approach where we try abbreviating the type
names, so the literal completion item for "handler" would look like:
func(<rw> ResponseWriter, <r> *Request) {<>}
where <> denote placeholders. The user can tab through quickly if they
like the abbreviations, otherwise they can rename them.
For unnamed types or if the abbreviation would duplicate a previous
abbreviation, we fall back to "_" as the parameter name. The user will
have to rename the parameter before they can use it.
One side effect of this is that we cannot support function literal
completions with unnamed parameters unless the user has enabled
snippet placeholders.
Change-Id: Ic0ec81e85cd8de79bff73314e80e722f10f8c84c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/193699
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Add support for literal completion candidates such as "[]int{}" or
"make([]int, 0)". We support both named and unnamed types. I used the
existing type matching logic, so, for example, if the expected type is
an interface, we will suggest literal candidates that implement the
interface.
The literal candidates have a lower score than normal matching
candidates, so they shouldn't be disruptive in cases where you don't
want a literal candidate.
This commit adds support for slice, array, struct, map, and channel
literal candidates since they are pretty similar. Functions will be
supported in a subsequent commit.
I also added support for setting a snippet's final tab stop. This is
useful if you want the cursor to end up somewhere other than the
character after the snippet.
Change-Id: Id3b74260fff4d61703989b422267021b00cec005
Reviewed-on: https://go-review.googlesource.com/c/tools/+/193698
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Revert my previous change to include fuzzy matches with a score of
zero. Zero scorers have some characters that match, but they are
pretty poor overall. Pulling in all the extra junk candidates was
slowing things down in certain cases.
Change-Id: I560f46903281f21b0628c9b14848cddf1e3c0a38
Reviewed-on: https://go-review.googlesource.com/c/tools/+/195418
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
A mapper is always uniquely tied to a file at a specific version, so
just build it when we get a new *ast.File. We build the mapper using the
*token.File associated with the particular *ast.File, which is why there
is one per ParseGoHandle instead of FileHandle.
Change-Id: Ida40981ef91f6133cdd07e9793337fcd67510fba
Reviewed-on: https://go-review.googlesource.com/c/tools/+/194517
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Now when trying to fix *ast.BadStmt, we parse the manually extracted
expression using parser.ParseFile instead of parser.ParseExpr.
ParseFile will yield *ast.BadStmt nodes for any bad statements nested
in our first bad statement, allowing us to fix them recursively.
To turn our expression into a "valid" file we can pass to
parser.ParseFile, I wrapped it thusly:
package fake
func _() {
<our expression>
}
Change-Id: I0d4fd4ebce6450021da8e03caa11d0ae5152ea8d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/194342
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Add a new @completePartial note that does not require you to specify
the full list of completions. This gets rid of a lot of noise when you
just want to test the relative order of some completion candidates but
don't care about all the other candidates in scope.
I changed one existing test to use @completePartial as an example.
Change-Id: I56005405477e562803f094c0cac05ef2b854ad1a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/192657
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Remove the wantSuggestedFixes flag, and run the flagged code
by default.
Add test cases for suggested fixes.
Generate a suggested fix to the assign analysis that suggests removing redundant assignments.
Fix the propagation of suggested fixes (using rstambler's code).
Change-Id: I342c8e0b75790518f228b00ebd2979d24338be3b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/193265
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Improve the existing fix-the-AST code to better identify the
expression following the "go" or "defer" keywords:
- Don't slurp the expression start outside the loop since the
expression might only have a single token.
- Set expression end to the position after the final token, not the
position of the final token.
- Track curly brace nesting to properly capture an entire "func() {}"
expression.
- Fix parent node detection to work when BadStmt isn't first statement
of block.
- Add special case to detect dangling period, e.g. "defer fmt.". We
insert phantom "_" selectors like go/parser does to prevent the
dangling "." from messing up the AST.
- Use reflect in offsetPositions so it updates positions in all node
types. This code shouldn't be called often, so I don't think
performance is a concern.
I also tweaked the function snippet code so it properly expands
"defer" and "go" expressions to function calls. It thought it didn't
have to expand since there was already a *ast.CallExpr, but the
CallExpr was faked by us and the source doesn't actually contain the
"()" calling parens.
Note that this does not work for nested go/defer statements. For
example, completions won't work properly in cases like this:
go func() {
defer fmt.<>
}
I think we can fix this as well with some more work.
Change-Id: I8f9753fda76909b0e3a83489cdea69ad04ee237a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/193997
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Folding ranges need to be computed to present folding ranges that make
sense when lineFoldingOnly is true. This change computes the folding
ranges to include the lines that are contained within the start and end
parenthesis/braces when applicable.
Folding ranges are not returned when the contained nodes begin or end on
the same lines as the parenthesis/brace. This is to avoid misleading
folding ranges like the following in unformatted code:
if true {
fmt.Println("true") } else {
fmt.Println("false")
}
---folding "if true {}"--->
if true {
fmt.Println("false")
}
Change-Id: I2931d02837ad5f2dd96cc93da5ede59afd6bcdce
Reviewed-on: https://go-review.googlesource.com/c/tools/+/192678
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
The existing implementation did not suggest struct field names
when running completion from within a slice literal of
pointers. Now, struct field names are suggested in that case.
Fixesgolang/go#33211
Change-Id: I6028420a9a789846b070fcc6e45ec89dc4d898d4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/192277
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Invert "useDeepCompletions" config flag to "disableDeepCompletion" and
separate out "disableFuzzyMatching" which reverts to the previous
prefix matching behavior.
I separated fuzzy matching tests out to a separate file so they aren't
entangled with deep completion tests. In coming up with representative
test cases I found a couple issues which I fixed:
- We were treating a fuzzy matcher score of 0 as no match, but the
matcher returns 0 for candidates that match but have no bonuses. I
changed the matcher interface so that a score of 0 counts as a
match. For example, this was preventing a pattern of "o" from
matching "foo".
- When we lower a candidate's score based on its depth, we were
subtracting a static multiplier which could result in the score
going negative. A negative score messes up future score weighting
because multiplying it by a value in the range [0, 1) makes it
bigger instead of smaller. Fix by scaling a candidate's score based
on its depth rather than subtracting a constant factor.
Updates golang/go#32754
Change-Id: Ie6f9111f1696b0d067d08f7eed7b0a338ad9cd67
Reviewed-on: https://go-review.googlesource.com/c/tools/+/192137
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Prepare rename gets the range of the identifier to rename. Returns an
error when there is no identifier to rename.
Change-Id: I5e5865bc9ff97e6a95ac4f0c48edddcfd0f9ed67
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191170
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change allows renamings of the name of an import spec.
Since there is not always explicit identifier available to select and
rename, allow renaming packages from positions within the import spec.
Change-Id: I0a8aaa92c26e1795ddb9c31a1165b2f2ee89aa34
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191165
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
When there is an explicit name for an import spec, treat it as its own
identifier, separate from the import path.
Example:
import h "hello"
The name h is defined in that import spec, not in the package hello
it contains its own references. If asked about a position within the
import path, continue treating that as referencing the imported package.
If the position is within the name, use the identifier there that is
local to that file.
This change allows for go to definition of the explicit name to point to
itself, find all references from the import spec, and rename the
explicit name from the import spec.
Change-Id: Ia1d927a26e73f2dc450d256d71909c006bdf4c37
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191164
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Since renaming an identifier within an import spec is not yet supported,
return an error when this is encountered. These idents from the import
spec have a nil declaration object.
Import paths that contain '.' or '/' are caught by the valid identifier check
avoiding the crash, but import paths such as "fmt" are not as fmt is a
valid identifier. This change checks if i.decl.obj is nil and returns an error
if it is to avoid the crash.
Fixesgolang/go#33768
Change-Id: I4e757b42bedffd648fc821590e4a383826200dc3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191163
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Unimported packages may be suggested as completion items. Since these
are not yet imported, they should be ranked lower than other candidates.
They also require an additional import statement to be valid, which is
provided as an AdditionalTextEdit.
Adding this import does not use astutil.AddNamedImport, to avoid
editing the current ast and work even if there are errors. Additionally,
it can be hard to determine what changes need to be made to the source
document from the ast, as astutil.AddNamedImport includes a merging
pass. Instead, the completion item simply adds another import
declaration.
Change-Id: Icbde226d843bd49ee3713cafcbd5299d51530695
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190338
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This is the first in a series of many changes that will change the API
of the source package to use different types for positions. Using
token.Pos is particularly fragile, since the pos has to refer to the
specific *ast.File from which it was derived.
Change-Id: I70c9b806f7dd45b2e229954ebdcdd86e2cf3bbbb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190340
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This fix adds all packages to the renamer packages map.
Renaming performs checks on each package to make sure there are no
conflicts. If there are multiple packages, each package needs to be
checked. The packages were being incorrectly added to the map and were
all being put under a single key.
Fixesgolang/go#33664
Change-Id: I68466ce34ac49b700ce6d14ce0b53e2795926fa9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190399
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
When it is certain we are completing a struct field name, we don't
want deep completions. The only possible completions are the remaining
field names.
I also silenced the log spam in tests by disabling the go/packages
logger and the lsp logger.
Fixesgolang/go#33614
Change-Id: Icec8d92112b1674fa7a6a21145ab710d054919b4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190097
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change fixes documentation for completion items by using cached
package and AST information to derive the documentation. We also add
testing for documentation in completion items.
Change-Id: I911fb80f5cef88640fc06a9fe474e5da403657e3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189237
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This is probably a better approach than showing an extra diagnostic,
since a user cannot dismiss a diagnostic.
Fixesgolang/go#33397
Change-Id: I92b9a00f51a463673993793abfd4cfb99ce69a91
Reviewed-on: https://go-review.googlesource.com/c/tools/+/188766
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Packages with errors may still contain files that can be formatted.
Try to format the source of the files in packages that have errors.
This change will still not format files with parse errors.
Updates golang/go#31291
Change-Id: Ia5168d7908948d201eac7f2ee28534022a2d4eb0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/187757
Run-TryBot: Suzy Mueller <suzmue@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
https://golang.org/issue/33157 explains the issues with overlays. The
gopls tests caught this bug, but the go/packages tests didn't, so modify
the go/packages tests correspondingly.
Change-Id: I8ea8e06e145aa2420655cbe4884e60f36acfad7b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186299
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
For all uses inside the lsp we use the detatch logic instead
For tests we build it in the test harness instead
This is in preparation for things on the context becomming important
Change-Id: I7e6910e0d3581b82abbeeb09f9c22a99efb73142
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185677
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Support renaming of identifiers in test packages. The packages for
all of the references must be checked and the changes need to be
deduped, since both a package and its test package contain some of the
same files.
Fixesgolang/go#32974
Change-Id: Ie51e19716faae77ce7e5254eeb3956faa42c2a09
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185277
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Objects for builtin types all have position token.NoPos. We do
not want all objects that have position token.NoPos to be matched
when we are looking for references for this object, so we need to
compare the names of the objects as well.
Fixesgolang/go#32991
Change-Id: I67e7aba9909ebcbb246203ea5c572debf996c792
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185247
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
