A few gc.Node ops may be shared across functions.
The compiler is (mostly) already careful to avoid mutating them.
However, from a concurrency perspective, replacing (say)
an empty list with an empty list still counts as a mutation.
One place this occurs is orderinit. Avoid it.
This requires fixing one spot where shared nodes were mutated.
It doesn't result in any functional or performance changes.
Passes toolstash-check.
Updates #15756
Change-Id: I63c93b31baeeac62d7574804acb6b7f2bc9d14a9
Reviewed-on: https://go-review.googlesource.com/39196
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Round uses r+r < d to decide whether the remainder is
above or below half of d (to decide whether to round up or down).
This is wrong when r+r wraps negative, because it looks < d
but is really > d.
No one will ever care about rounding to a multiple of
d > 2⁶² (about 146 years), but might as well get it right.
Fixes#19807.
Change-Id: I1b55a742dc36e02a7465bc778bf5dd74fe71f7c0
Reviewed-on: https://go-review.googlesource.com/39151
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The node in typenamesym requires neither
a position nor a curfn.
Passes toolstash-check.
Updates #15756
Change-Id: I6d39a8961e5578fe5924aaceb29045b6de2699df
Reviewed-on: https://go-review.googlesource.com/39194
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
newnamel is newname but with no dependency on lineno or Curfn.
This makes it suitable for use in a concurrent back end.
Use it now to make tempAt global-free.
The decision to push the assignment to n.Name.Curfn
to the caller of newnamel is based on mdempsky's
comments in #19683 that he'd like to do that
for callers of newname as well.
Passes toolstash-check. No compiler performance impact.
Updates #19683
Updates #15756
Change-Id: Idc461a1716916d268c9ff323129830d9a6e4a4d9
Reviewed-on: https://go-review.googlesource.com/39191
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Convert yyerrors into Fatals.
Remove the goto.
Move variable declaration closer to use.
Unify printing strings a bit.
Convert an int param into a bool.
Passes toolstash-check. No compiler performance impact.
Change-Id: I9017681417b785cf8693d18b124ac4f1ff37f2b5
Reviewed-on: https://go-review.googlesource.com/39170
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The names never occur more than once,
so interning the results is counterproductive.
The impact is not very big, but neither is the fix.
name old time/op new time/op delta
Unicode 90.2ms ± 3% 88.3ms ± 5% -2.10% (p=0.000 n=94+98)
Change-Id: I1e3a24433db4ae0c9a6e98166568941824ff0779
Reviewed-on: https://go-review.googlesource.com/39193
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Also: Fix (testdata/gen/) copyGen.go, zeroGen.go, and arithConstGen.go
to actually match (testdata/) copy.go, zero.go, and arithConst.go, all
of which were manually edited in https://go-review.googlesource.com/20823
and https://go-review.googlesource.com/22748 despite the 'do not edit'
(or perhaps because it was missing in the case of arithConst.go).
For #13560.
Change-Id: I366e1b521e51885e0d318ae848760e5e14ccd488
Reviewed-on: https://go-review.googlesource.com/39172
Reviewed-by: Rob Pike <r@golang.org>
Prior to this CL, the SSA backend reported violations
of the //go:nowritebarrier annotation immediately.
This necessitated emitting errors during SSA compilation,
which is not compatible with a concurrent backend.
Instead, check for such violations later.
We already save the data required to do a late check
for violations of the //go:nowritebarrierrec annotation.
Use the same data, and check //go:nowritebarrier at the same time.
One downside to doing this is that now only a single
violation will be reported per function.
Given that this is for the runtime only,
and violations are rare, this seems an acceptable cost.
While we are here, remove several 'nerrors != 0' checks
that are rendered pointless.
Updates #15756Fixes#19250 (as much as it ever can be)
Change-Id: Ia44c4ad5b6fd6f804d9f88d9571cec8d23665cb3
Reviewed-on: https://go-review.googlesource.com/38973
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
We don't support stack frames over 2GB.
Rather than detect this during backend compilation,
check for it at the end of compilation.
This is arguably a more accurate check anyway,
since it takes into account the full frame,
including local stack, arguments, and arch-specific
rounding, although it's unlikely anyone would ever notice.
Also, rather than reporting the error right away,
take note of it and report it later, at the top level.
This is not relevant now, but it will help with making
the backend concurrent, as the append to the list of
oversized functions can be cheaply protected by a plain mutex.
Updates #15756
Updates #19250
Change-Id: Id3fa21906616d62e9dc66e27a17fd5f83304e96e
Reviewed-on: https://go-review.googlesource.com/38972
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
By checking GOARM in ssa/gen/ARM.rules, each intermediate operator
can be implemented via different instruction serials.
It is up to the user to choose between compitability and efficiency.
The Bswap32(x) is optimized to REV(x) when GOARM >= 6.
The CTZ(x) is optimized to CLZ(RBIT x) when GOARM == 7.
Change-Id: Ie9ee645fa39333fa79ad84ed4d1cefac30422814
Reviewed-on: https://go-review.googlesource.com/35610
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Starting in go1.9, the minimum processor requirement for ppc64 is POWER8. So it
may now use the same divWW implementation as ppc64le.
Updates #19074
Change-Id: If1a85f175cda89eee06a1024ccd468da6124c844
Reviewed-on: https://go-review.googlesource.com/39010
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
User defined numeric types such as "type Int int64" have
been able to be scanned into without a custom scanner by
using the reflect scan code path used to convert between
various numeric types. Add in a path for string types
for symmetry and least surprise.
Fixes#18101
Change-Id: I00553bcf021ffe6d95047eca0067ee94b54ff501
Reviewed-on: https://go-review.googlesource.com/39031
Run-TryBot: Daniel Theophanes <kardianos@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Rather than using arm64.Rconv directly in the archArm64 constructor
use the generic obj.Rconv helper. This removes the only use of
arm64.Rconv outside the arm64 package itself.
Change-Id: I99e9e7156b52cd26dc134f610f764ec794264e2c
Reviewed-on: https://go-review.googlesource.com/38756
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TestUnshareMountNameSpace fails on arm64 due to permission problems.
Skip that test for now when permission problems are encountered, so we
don't regress elsewhere in the meantime.
Updates #19698
Change-Id: I9058928afa474b813652c9489f343b8957160a6c
Reviewed-on: https://go-review.googlesource.com/39052
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Currently runtime.GC() triggers a STW GC. For common uses in tests and
benchmarks, it doesn't matter whether it's STW or concurrent, but for
uses in servers for things like collecting heap profiles and
controlling memory footprint, this pause can be a bit problem for
latency.
This changes runtime.GC() to trigger a concurrent GC. In order to
remain as close as possible to its current meaning, we define it to
always perform a full mark/sweep GC cycle before returning (even if
that means it has to finish up a cycle we're in the middle of first)
and to publish the heap profile as of the triggered mark termination.
While it must perform a full cycle, simultaneous runtime.GC() calls
can be consolidated into a single full cycle.
Fixes#18216.
Change-Id: I9088cc5deef4ab6bcf0245ed1982a852a01c44b5
Reviewed-on: https://go-review.googlesource.com/37520
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
sweepone returns ^uintptr(0) when there are no more spans to *start*
sweeping, but there may be spans being swept concurrently at the time
and there's currently no efficient way to tell when the sweeper is
done sweeping all the spans.
We'll need this for concurrent runtime.GC(), so add a count of the
number of active sweepone calls to make it possible to block until
sweeping is truly done.
This is also useful for more accurately printing the gcpacertrace,
since that should be printed after all of the sweeping stats are in
(currently we can print it slightly too early).
For #18216.
Change-Id: I06e6240c9e7b40aca6fd7b788bb6962107c10a0f
Reviewed-on: https://go-review.googlesource.com/37716
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Forced GCs don't provide good information about how to adjust the GC
trigger. Currently we avoid adjusting the trigger on forced GC because
forced GC is also STW and we don't adjust the trigger on STW GC.
However, this will become a problem when forced GC is concurrent.
Fix this by skipping trigger adjustment if the GC was user-forced.
For #18216.
Change-Id: I03dfdad12ecd3cfeca4573140a0768abb29aac5e
Reviewed-on: https://go-review.googlesource.com/38951
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently gcMode != gcBackgroundMode implies this was a user-forced GC
cycle. This is no longer going to be true when we make runtime.GC()
trigger a concurrent GC, so replace this with an explicit
work.userForced bit.
For #18216.
Change-Id: If7d71bbca78b5f0b35641b070f9d457f5c9a52bd
Reviewed-on: https://go-review.googlesource.com/37519
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently freeOSMemory calls gcStart directly, but we really just want
it to behave like runtime.GC() and then perform a scavenge, so make it
call runtime.GC() rather than gcStart.
For #18216.
Change-Id: I548ec007afc788e87d383532a443a10d92105937
Reviewed-on: https://go-review.googlesource.com/37518
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Now that the gcMode is no longer involved in the GC trigger condition,
we can simplify the triggering of forced GCs. By making the trigger
condition for forced GCs true even if gcphase is not _GCoff, we don't
need any special case path in gcStart to ensure that forced GCs don't
get consolidated.
Change-Id: I6067a13d76e40ff2eef8fade6fc14adb0cb58ee5
Reviewed-on: https://go-review.googlesource.com/37517
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently the GC triggering condition is an awkward combination of the
gcMode (whether or not it's gcBackgroundMode) and a boolean
"forceTrigger" flag.
Replace this with a new gcTrigger type that represents the range of
transition predicates we need. This has several advantages:
1. We can remove the awkward logic that affects the trigger behavior
based on the gcMode. Now gcMode purely controls whether to run a
STW GC or not and the gcTrigger controls whether this is a forced
GC that cannot be consolidated with other GC cycles.
2. We can lift the time-based triggering logic in sysmon to just
another type of GC trigger and move the logic to the trigger test.
3. This sets us up to have a cycle count-based trigger, which we'll
use to make runtime.GC trigger concurrent GC with the desired
consolidation properties.
For #18216.
Change-Id: If9cd49349579a548800f5022ae47b8128004bbfc
Reviewed-on: https://go-review.googlesource.com/37516
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently sysmon triggers periodic GC if GC is not currently running
and it's been long enough since the last GC. This misses some
important conditions; for example, whether GC is enabled at all by
GOGC. As a result, if GOGC is off, once we pass the timeout for
periodic GC, sysmon will attempt to trigger a GC every 10ms. This GC
will be a no-op because gcStart will check all of the appropriate
conditions and do nothing, but it still goes through the motions of
waking the forcegc goroutine and printing a gctrace line.
Fix this by making sysmon call gcShouldStart to check *all* of the
appropriate transition conditions before attempting to trigger a
periodic GC.
Fixes#19247.
Change-Id: Icee5521ce175e8419f934723849853d53773af31
Reviewed-on: https://go-review.googlesource.com/37515
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently the heap profile is flushed by *either* gcSweep in STW mode
or by gcMarkTermination in concurrent mode. Simplify this by making
gcMarkTermination always flush the heap profile and by making gcSweep
do one extra flush (instead of two) in STW mode.
Change-Id: I62147afb2a128e1f3d92ef4bb8144c8a345f53c4
Reviewed-on: https://go-review.googlesource.com/37715
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently we snapshot the heap profile just *after* mark termination
starts the world because it's a relatively expensive operation.
However, this means any alloc or free events that happen between
starting the world and snapshotting the heap profile can be accounted
to the wrong cycle. In the worst case, a free can be accounted to the
cycle before the alloc; if the heap is small, this can result
temporarily in a negative "in use" count in the profile.
Fix this without making STW more expensive by using a global heap
profile cycle counter. This lets us split up the operation into a two
parts: 1) a super-cheap snapshot operation that simply increments the
global cycle counter during STW, and 2) a more expensive cleanup
operation we can do after starting the world that frees up a slot in
all buckets for use by the next heap profile cycle.
Fixes#19311.
Change-Id: I6bdafabf111c48b3d26fe2d91267f7bef0bd4270
Reviewed-on: https://go-review.googlesource.com/37714
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently memRecord has the same set of four fields repeated three
times. Pull these into a type and use this type three times. This
cleans up and simplifies the code a bit and will make it easier to
switch to a globally tracked heap profile cycle for #19311.
Change-Id: I414d15673feaa406a8366b48784437c642997cf2
Reviewed-on: https://go-review.googlesource.com/37713
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
The symExport flag tells whether a symbol is in the export list
already or not (and it's also used to avoid being added to that
list). Exporting is based on that export list - no need to check
again.
Change-Id: I6056f97aa5c24a19376957da29199135c8da35f9
Reviewed-on: https://go-review.googlesource.com/39033
Reviewed-by: Dave Cheney <dave@cheney.net>
Every time I modify heap profiling, I find myself redrawing this
diagram, so add it to the comments. This shows how allocations and
frees are accounted, how we arrive at consistent profile snapshots,
and when those snapshots are published to the user.
Change-Id: I106aba1200af3c773b46e24e5f50205e808e2c69
Reviewed-on: https://go-review.googlesource.com/37514
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Now that we have a nice predicate system, improve the tests performed
by TestMemStats. We add some more non-zero checks (now that we force a
GC, things like NumGC must be non-zero), checks for trivial boolean
fields, and a few more range checks.
Change-Id: I6da46d33fa0ce5738407ee57d587825479413171
Reviewed-on: https://go-review.googlesource.com/37513
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently most TestMemStats failures dump the whole MemStats object if
anything is amiss without telling you what is amiss, or even which
field is wrong. This makes it hard to figure out what the actual
problem is.
Replace this with a reflection walk over MemStats and a map of
predicates to check. If one fails, we can construct a detailed and
descriptive error message. The predicates are a direct translation of
the current tests.
Change-Id: I5a7cafb8e6a1eeab653d2e18bb74e2245eaa5444
Reviewed-on: https://go-review.googlesource.com/37512
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Hwindowsgui has the same meaning as Hwindows - build PE
executable. So use Hwindows everywhere.
Change-Id: I2cae5777f17c7bc3a043dfcd014c1620cc35fc20
Reviewed-on: https://go-review.googlesource.com/38761
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
cmd/link -H flag is stored in variable of type
cmd/internal/obj.HeadType. The HeadType type from cmd/internal/obj
accepts Hwindows and Hwindowsgui values, but these values have
same meaning - build PE executable, except for 2 places in
cmd/link/internal/ld package.
This CL introduces code to store cmd/link "windowsgui" -H flag
in cmd/link/internal/ld, so cmd/internal/obj.Hwindowsgui can be
removed in the next CL.
This CL also includes 2 changes to code where distinction
between Hwindows and Hwindowsgui is important.
Change-Id: Ie5ee1f374e50c834652a037f2770118d56c21a2a
Reviewed-on: https://go-review.googlesource.com/38760
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Remove one of the many lookup variants.
Change-Id: I4095aa030da4227540badd6724bbf50b728fbe93
Reviewed-on: https://go-review.googlesource.com/38990
Reviewed-by: Dave Cheney <dave@cheney.net>
Instead, add a scratchFpMem field to ssafn,
so that it may be passed on to genssa.
Updates #15756
Change-Id: Icdeae290d3098d14d31659fa07a9863964bb76ed
Reviewed-on: https://go-review.googlesource.com/38728
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
During the review of CL 38801 it was noted that it would be nice
to have a bit more clarity on how-and-why SB addressing is handled
strangely on s390x. This additional comment should hopefully help.
In general SB is handled differently because not all instructions
have variants that use relative addressing.
Change-Id: I3379012ae3f167478c191c435939c3b876c645ed
Reviewed-on: https://go-review.googlesource.com/38952
Reviewed-by: Keith Randall <khr@golang.org>
This is a better home for it.
Change-Id: I7ce96c16378d841613edaa53c07347b0ac99ea6e
Reviewed-on: https://go-review.googlesource.com/38970
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TestDWARF has been added in CL 38855. This test is
failing on Plan 9 because executables don't have
a DWARF symbol table.
Fixes#19793.
Change-Id: I7fc547a7c877b58cc4ff6b4eb5b14852e8b4668b
Reviewed-on: https://go-review.googlesource.com/38931
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Even very large Types are not very big.
The haspointer cache looks like premature optimization.
Removing them has no detectable compiler performance impact,
and it removes mutable shared state used by the backend.
Updates #15756
Change-Id: I2d2cf03f470f5eef5bcd50ff693ef6a01d481700
Reviewed-on: https://go-review.googlesource.com/38912
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Flush file content to disk before diffing files,
may cause unpredictable results on Windows.
Convert from \r\n to \n when comparing diff result.
Change-Id: Ibcd6154a2382dba1338ee5674333611aea16bb65
Reviewed-on: https://go-review.googlesource.com/36750
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
REV/REV16/REVSH were introduced in ARMv6, they offered more efficient
byte reverse operatons.
MMUL/MMULA/MMULS were introduced in ARMv6, they simplified
a serial of mul->shift->add/sub operations into a single instruction.
RBIT was introduced in ARMv7, it inversed a 32-bit word's bit order.
MULS was introduced in ARMv7, it corresponded to MULA.
MULBB/MULABB were introduced in ARMv5TE, they performed 16-bit
multiplication (and accumulation).
Change-Id: I6365b17b3c4eaf382a657c210bb0094b423b11b8
Reviewed-on: https://go-review.googlesource.com/35565
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
CL 38147 eliminated package gc globals in formatting routines.
However, tconv still used the Type field Trecur
to avoid infinite recursion when formatting recursive
interfaces types such as (test/fixedbugs398.go):
type i1 interface {
F() interface {
i1
}
}
type i2 interface {
F() interface {
i2
}
}
This CL changes the recursion prevention to use a parameter,
and threads it through the formatting routines.
Because this fundamentally limits the embedding depth
of all types, it sets the depth limit to be much higher.
In practice, it is unlikely to impact any code at all,
one way or the other.
The remaining uses of Type.Trecur are boolean in nature.
A future CL will change Type.Trecur to be a boolean flag.
The removal of a couple of mode.Sprintf calls
makes this a very minor net performance improvement:
name old alloc/op new alloc/op delta
Template 40.0MB ± 0% 40.0MB ± 0% -0.13% (p=0.032 n=5+5)
Unicode 30.0MB ± 0% 29.9MB ± 0% ~ (p=0.310 n=5+5)
GoTypes 114MB ± 0% 113MB ± 0% -0.25% (p=0.008 n=5+5)
SSA 856MB ± 0% 855MB ± 0% -0.04% (p=0.008 n=5+5)
Flate 25.5MB ± 0% 25.4MB ± 0% -0.27% (p=0.008 n=5+5)
GoParser 31.9MB ± 0% 31.9MB ± 0% ~ (p=0.222 n=5+5)
Reflect 79.0MB ± 0% 78.6MB ± 0% -0.45% (p=0.008 n=5+5)
Tar 26.8MB ± 0% 26.7MB ± 0% -0.25% (p=0.032 n=5+5)
XML 42.4MB ± 0% 42.4MB ± 0% ~ (p=0.151 n=5+5)
name old allocs/op new allocs/op delta
Template 395k ± 0% 391k ± 0% -1.00% (p=0.008 n=5+5)
Unicode 321k ± 1% 319k ± 0% -0.56% (p=0.008 n=5+5)
GoTypes 1.16M ± 0% 1.14M ± 0% -1.61% (p=0.008 n=5+5)
SSA 7.63M ± 0% 7.60M ± 0% -0.30% (p=0.008 n=5+5)
Flate 239k ± 0% 234k ± 0% -1.94% (p=0.008 n=5+5)
GoParser 320k ± 0% 317k ± 1% -0.86% (p=0.008 n=5+5)
Reflect 1.00M ± 0% 0.98M ± 0% -2.17% (p=0.016 n=4+5)
Tar 255k ± 1% 251k ± 0% -1.35% (p=0.008 n=5+5)
XML 398k ± 0% 395k ± 0% -0.89% (p=0.008 n=5+5)
Updates #15756
Change-Id: Id23e647d347aa841f9a69d51f7d2d7d27b259239
Reviewed-on: https://go-review.googlesource.com/38797
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
