CL 106096 changed the iOS exec wrapper to directly run the binary
without waiting for a SIGINT signal, but did so in a way that
expects a "(lldb)" response from lldb in 2 seconds. Lldb might
not out output anything until the program finishes, so change the
exec wrapper to just fire and forget the the run command and go
straight to waiting for exit, successfully or otherwise.
Change-Id: I6a2dc63f9b29fe44edb3591afb048b9a8e2e0822
Reviewed-on: https://go-review.googlesource.com/106176
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
To enable the exec wrapper go_darwin_arm_exec.go to run binaries
on iOS devices, the GOIOS_DEV_ID variable needs to be set to a code
signing identity. The program detect.go attempts to detect suitable
values for GOIOS_DEV_ID (along with GOIOS_APP_ID and GOIOS_TEAM_ID).
Before this change, detect.go would use "security find-identity
-p codesigning -v" to list all available identities for code signing
and pick the first one with "iPhone Developer" in its name. However,
that pick might be invalid since if it was replaced by an identity
issued later.
For example, on the mobile builder:
$ security find-identity -p codesigning -v
1) 0E251DE41FE4490574E475AC320B47F58D6D3635 "lldb_codesign"
2) 0358588D07AA6A19478981BA405F40A97F95F187 "iPhone Developer: xxx@xxx (2754T98W8E)"
3) FC6D96F24A3223C98BF7A2C2C5194D82E04CD23E "iPhone Developer: xxx@xxx (2754T98W8E)"
3 valid identities found
In this case, the identity 0358588D07AA6A19478981BA405F40A97F95F187
is picked by detect.go even though it has been invalidated by
FC6D96F24A3223C98BF7A2C2C5194D82E04CD23E.
Instead of attempting to find an identity from the "security
find-identity" list, use the identity from the CommonName in the
embedded certificate in the provisioning file. The CommonName only
lists the identity name (iPhone Developer: xxx@xxx (2754T98W8E)),
not the fingerprint (FC6D96F24A3223C98BF7A2C2C5194D82E04CD23E), but
fortunately the codesign tool accepts both.
Identity names may not be unique, as demonstrated by the example,
but that will result in an ambiguity error at codesigning instead of
a more obscure error about an invalid identity when
go_darwin_arm_exec.go runs a binary.
The fix is then to delete the invalid identity from the system
keychain.
While here, find all connected devices instead of the first connected
and only consider provision files that covers them all. This matters
for the mobile builder where two devices are connected.
Change-Id: I6beb59ace3fc5e071ba76222a20a607765943989
Reviewed-on: https://go-review.googlesource.com/105436
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Once upon a time, the iOS exec wrapper needed to change the current
working directory for the binary being tested. To allow that, the
runtime raised a SIGINT signal that the wrapper caught, changed the
working directory and resumed the process.
These days, the current working directory is passed from the wrapper
to the runtime through a special entry in the app metadata and the
SIGINT handshake is not necessary anymore.
Remove the signaling from the runtime and the exec harness.
Change-Id: Ia53bcc9e4724d2ca00207e22b91ce80a05271b55
Reviewed-on: https://go-review.googlesource.com/106096
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
This commit adds scripts for running the WebAssembly binaries that the
Go compiler will produce.
The script go_js_wasm_exec uses Node.js to run the binaries. Adding it
to PATH will enable "go run" and "go test" to work for js/wasm
without having to manually provide the -exec flag.
See https://golang.org/cmd/go/#hdr-Compile_and_run_Go_program
for more information.
The web page wasm_exec.html is an example on how to run the same
binaries in a web browser.
Both scripts use wasm_exec.js as a shared library.
Updates #18892
Change-Id: Ia4d9bea025957750baa0d0651243dc88f156f85d
Reviewed-on: https://go-review.googlesource.com/103255
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Fixes#14327
Much of the code is based on the linux/amd64 code that implements these
build modes, and code is shared where possible.
Change-Id: Ia510f2023768c0edbc863aebc585929ec593b332
Reviewed-on: https://go-review.googlesource.com/93875
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When there are plugins, there may not be a unique copy of runtime
functions like goexit, mcall, etc. So identifying them by entry
address is problematic. Instead, keep track of each special function
using a field in the symbol table. That way, multiple copies of
the same runtime function will be treated identically.
Fixes#24351Fixes#23133
Change-Id: Iea3232df8a6af68509769d9ca618f530cc0f84fd
Reviewed-on: https://go-review.googlesource.com/100739
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
bytes.IndexByte is heavily optimized. Use it in findnull.
This is second attempt, similar to CL97523.
In this version we never call IndexByte on region of memory,
that crosses page boundary. A bit slower than CL97523,
but still fast:
name old time/op new time/op delta
GoString-6 164ns ± 2% 118ns ± 0% -28.00% (p=0.000 n=10+6)
findnull is also used in gostringnocopy,
which is used in many hot spots in the runtime.
Fixes#23830
Change-Id: Id843dd4f65a34309d92bdd8df229e484d26b0cb2
Reviewed-on: https://go-review.googlesource.com/98015
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This reverts commit 7365fac2db.
Reason for revert: breaks the build on some architectures, reading unmapped pages?
Change-Id: I3a8c02dc0b649269faacea79ecd8213defa97c54
Reviewed-on: https://go-review.googlesource.com/97995
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
bytes.IndexByte is heavily optimized.
Use it in findnull.
name old time/op new time/op delta
GoString-8 65.5ns ± 1% 40.2ns ± 1% -38.62% (p=0.000 n=19+19)
findnull is also used in gostringnocopy,
which is used in many hot spots in the runtime.
Fixes#23830
Change-Id: I2e6cb279c7d8078f8844065de684cc3567fe89d7
Reviewed-on: https://go-review.googlesource.com/97523
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Increase the sleep and wait for up to 2 seconds for the dup2.
Apparently it can sometimes take a long time.
Fixes#23784
Change-Id: I929530b057bbcd842b28a7640c39dd68d719ff7d
Reviewed-on: https://go-review.googlesource.com/93895
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
iana.org, www.iana.org and data.iana.org all present a valid TLS
certificate, so let's use it when fetching data or linking to
resources to avoid errors in transit.
Change-Id: Ib3ce7c19789c4e9d982a776b61d8380ddc63194d
Reviewed-on: https://go-review.googlesource.com/89416
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This replaces frame size -4/-8 with the NOFRAME flag in mips and
mips64 assembly.
This was automated with:
sed -i -e 's/\(^TEXT.*[A-Z]\),\( *\)\$-[84]/\1|NOFRAME,\2$0/' $(find -name '*_mips*.s')
Plus a manual fix to mkduff.go.
The go binary is identical on both architectures before and after this
change.
Change-Id: I0310384d1a584118c41d1cd3a042bb8ea7227efb
Reviewed-on: https://go-review.googlesource.com/92044
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This replaces frame size -8 with the NOFRAME flag in arm64 assembly.
This was automated with:
sed -i -e 's/\(^TEXT.*[A-Z]\),\( *\)\$-8/\1|NOFRAME,\2$0/' $(find -name '*_arm64.s')
Plus a manual fix to mkduff.go.
The go binary is identical before and after this change.
Change-Id: I0310384d1a584118c41d1cd3a042bb8ea7227efa
Reviewed-on: https://go-review.googlesource.com/92043
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This replaces frame size -4 with the NOFRAME flag in arm assembly.
This was automated with:
sed -i -e 's/\(^TEXT.*[A-Z]\),\( *\)\$-4/\1|NOFRAME,\2$0/' $(find -name '*_arm.s')
Plus three manual comment changes found by:
grep '\$-4' $(find -name '*_arm.s')
The go binary is identical before and after this change.
Change-Id: I0310384d1a584118c41d1cd3a042bb8ea7227ef9
Reviewed-on: https://go-review.googlesource.com/92042
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Both gcc and clang accept an option -fplugin=code.so to load
a plugin from the ELF shared object file code.so.
Obviously that plugin can then do anything it wants
during the build. This is contrary to the goal of "go get"
never running untrusted code during the build.
(What happens if you choose to run the result of
the build is your responsibility.)
Disallow this behavior by only allowing a small set of
known command-line flags in #cgo CFLAGS directives
(and #cgo LDFLAGS, etc).
The new restrictions can be adjusted by the environment
variables CGO_CFLAGS_ALLOW, CGO_CFLAGS_DISALLOW,
and so on. See the documentation.
In addition to excluding cgo-defined flags, we also have to
make sure that when we pass file names on the command
line, they don't look like flags. So we now refuse to build
packages containing suspicious file names like -x.go.
A wrinkle in all this is that GNU binutils uniformly accept
@foo on the command line to mean "if the file foo exists,
then substitute its contents for @foo in the command line".
So we must also reject @x.go, flags and flag arguments
beginning with @, and so on.
Fixes#23672, CVE-2018-6574.
Change-Id: I59e7c1355155c335a5c5ae0d2cf8fa7aa313940a
Reviewed-on: https://team-review.git.corp.google.com/209949
Reviewed-by: Ian Lance Taylor <iant@google.com>
CL 49490 fixed a warning when compiling the C code generated by cgo,
but it introduced typedef conflicts in Go code that cgo is supposed to
avoid.
Original CL description:
cmd/cgo: fix for function taking pointer typedef
Fixes#19832
Updates #19832Fixes#23720
Change-Id: I22a732db31be0b4f7248c105277ab8ee44ef6cfb
Reviewed-on: https://go-review.googlesource.com/92455
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
The dlopen function returns an opaque handle, and it is possible for
it to look like a Go pointer, causing garbage collector and cgo
confusion.
Fixes#23663
Change-Id: Id080e2bbcee8cfa7ac4a457a927f96949eb913f8
Reviewed-on: https://go-review.googlesource.com/91596
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Introduce GOANDROID_ADB_FLAGS for additional flags to adb invocations.
With GOANDROID_ADG_FLAGS, the Android builders can distinguish between
emulator and device builds.
Change-Id: I11729926a523ee27f6a3795cb2cfb64a9454f0a5
Reviewed-on: https://go-review.googlesource.com/88795
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
The cgo checker was issuing an error with cgocheck=2 when a timer
bucket was stored in a pollDesc. The pollDesc values are allocated
using persistentalloc, so they are not in the Go heap. The code is OK
since timer bucket pointers point into a global array, and as such are
never garbage collected or moved.
Mark timersBucket notinheap to avoid the problem. timersBucket values
only occur in the global timers array.
Fixes#23435
Change-Id: I835f31caafd54cdacc692db5989de63bb49e7697
Reviewed-on: https://go-review.googlesource.com/87637
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
After CL 69831, addTransitiveLinkDeps ensures that all dependencies of
a link appear in Deps. We no longer need to traverse through all
actions to find them. And the old scheme of looking through all the
actions and assuming we would see shared library actions before
libraries they depend on no longer works.
Now that we have complete deps, change to a simpler scheme in which we
find the shared libraries in the deps, and then use that to sort the
deps into archives and shared libraries.
Fixes#22224
Change-Id: I14fcc773ac59b6f5c2965cc04d4ed962442cc89e
Reviewed-on: https://go-review.googlesource.com/87497
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The jobject type is declared as a pointer, but some JVMs
(Dalvik, ART) store non-pointer values in them. In Go, we must
use uintptr instead of a real pointer for these types.
This is similar to the CoreFoundation types on Darwin which
were "fixed" in CL 66332.
Update #22906
Update #21897
RELNOTE=yes
Change-Id: I0d4c664501d89a696c2fb037c995503caabf8911
Reviewed-on: https://go-review.googlesource.com/81876
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixed by CL 76025 yesterday, without realizing it:
the testshared and testplugin builds of separate iface_i
packages were colliding incorrectly in the cache.
Including the build directory fixes that.
Fixes#22571.
Change-Id: Id8193781c67c3150823dc1f48eae781dfe3702fb
Reviewed-on: https://go-review.googlesource.com/76371
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The iOS test harness dumps the output of its lldb session to stdout,
but only if the lldb session was successfully started.
Make sure the log is always dumpede, so that lldb startup failures
such as
lldb setup error: exited (lldb start: exit status 253)
can be diagnosed.
For the iOS builders.
Change-Id: Ie0e3341dd8f84a88d26509c34816668d3ebbfaa0
Reviewed-on: https://go-review.googlesource.com/76195
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
This reverts commit 08f19bbde1.
Reason for revert:
The changed transformation takes effect on a larger set
of code snippets than expected.
For example, this:
func foo() {
// Comment
bar()
}
becomes:
func foo() {
// Comment
bar()
}
This is an unintended consequence.
Change-Id: Ifca88d6267dab8a8170791f7205124712bf8ace8
Reviewed-on: https://go-review.googlesource.com/81335
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Joe Tsai <joetsai@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Some C types are declared as pointers, but C code
stores non-pointers in them. When the Go garbage
collector sees such a pointer, it gets unhappy.
Instead, for these types represent them on the Go
side with uintptr.
We need this change to handle Apple's CoreFoundation
CF*Ref types. Users of these types might need to
update their code like we do in root_cgo_darwin.go.
The only change that is required under normal
circumstances is converting some nils to 0.
A go fix module is provided to help.
Fixes#21897
RELNOTE=yes
Change-Id: I9716cfb255dc918792625f42952aa171cd31ec1b
Reviewed-on: https://go-review.googlesource.com/66332
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
(The tests only run when swig is already installed on the local system.)
Change-Id: I172d106a68cfc746a1058f5a4bcf6761bab88912
Reviewed-on: https://go-review.googlesource.com/78175
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Permit the C preamble to use the _GoString_ type. Permit Go code to
pass string values directly to those C types. Add accessors for C
code to retrieve sizes and pointers.
Fixes#6907
Change-Id: I190c88319ec88a3ef0ddb99f342a843ba69fcaa3
Reviewed-on: https://go-review.googlesource.com/70890
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Also, with this change, error locations don't print absolute positions
in [] brackets following positions relative to line directives. To get
the absolute positions as well, specify the -L flag.
Fixes#22660.
Change-Id: I9ecfa254f053defba9c802222874155fa12fee2c
Reviewed-on: https://go-review.googlesource.com/77090
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The go repository contains a mix of github.com/golang/go/issues/xxxxx
and golang.org/issues/xxxxx URLs for references to issues in the issue
tracker. We should use one for consistency, and golang.org is preferred
in case the project moves the issue tracker in the future.
This reasoning is taken from a comment Sam Whited left on a CL I
recently opened: https://go-review.googlesource.com/c/go/+/73890.
In that CL I referenced an issue using its github.com URL, because other
tests in the file I was changing contained references to issues using
their github.com URL. Sam Whited left a comment on the CL stating I
should change it to the golang.org URL.
If new code is intended to reference issues via golang.org and not
github.com, existing code should be updated so that precedence exists
for contributors who are looking at the existing code as a guide for the
code they should write.
Change-Id: I3b9053fe38a1c56fc101a8b7fd7b8f310ba29724
Reviewed-on: https://go-review.googlesource.com/75673
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL makes "go install" behave the way many users expect:
install only the things named on the command line.
Future builds still run as fast, thanks to the new build cache (CL 75473).
To install dependencies as well (the old behavior), use "go install -i".
Actual definitions aside, what most users know and expect of "go install"
is that (1) it installs what you asked, and (2) it's fast, unlike "go build".
It was fast because it installed dependencies, but installing dependencies
confused users repeatedly (see for example #5065, #6424, #10998, #12329,
"go build" and "go test" so that they could be "fast" too, but that only
created new opportunities for confusion. We also had to add -installsuffix
and then -pkgdir, to allow "fast" even when dependencies could not be
installed in the usual place.
The recent introduction of precise content-based staleness logic means that
the go command detects the need for rebuilding packages more often than it
used to, with the consequence that "go install" rebuilds and reinstalls
dependencies more than it used to. This will create more new opportunities
for confusion and will certainly lead to more issues filed like the ones
listed above.
CL 75743 introduced a build cache, separate from the install locations.
That cache makes all operations equally incremental and fast, whether or
not the operation is "install" or "build", and whether or not "-i" is used.
Installing dependencies is no longer necessary for speed, it has confused
users in the past, and the more accurate rebuilds mean that it will confuse
users even more often in the future. This CL aims to end all that confusion
by not installing dependencies by default.
By analogy with "go build -i" and "go test -i", which still install
dependencies, this CL introduces "go install -i", which installs
dependencies in addition to the things named on the command line.
Fixes#5065.
Fixes#6424.
Fixes#10998.
Fixes#12329.
Fixes#18981.
Fixes#22469.
Another step toward #4719.
Change-Id: I3d7bc145c3a680e2f26416e182fa0dcf1e2a15e5
Reviewed-on: https://go-review.googlesource.com/75850
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This CL adds an automatic, limited "go vet" to "go test".
If the building of a test package fails, vet is not run.
If vet fails, the test is not run.
The goal is that users don't notice vet as part of the "go test"
process at all, until vet speaks up and says something important.
This should help users find real problems in their code faster
(vet can just point to them instead of needing to debug a
test failure) and expands the scope of what kinds of things
vet can help with.
The "go vet" runs in parallel with the linking of the test binary,
so for incremental builds it typically does not slow the overall
"go test" at all: there's spare machine capacity during the link.
all.bash has less spare machine capacity. This CL increases
the time for all.bash on my laptop from 4m41s to 4m48s (+2.5%)
To opt out for a given run, use "go test -vet=off".
The vet checks used during "go test" are a subset of the full set,
restricted to ones that are 100% correct and therefore acceptable
to make mandatory. In this CL, that set is atomic, bool, buildtags,
nilfunc, and printf. Including printf is debatable, but I want to
include it for now and find out what needs to be scaled back.
(It already found one real problem in package os's tests that
previous go vet os had not turned up.)
Now that we can rely on type information it may be that printf
should make its function-name-based heuristic less aggressive
and have a whitelist of known print/printf functions.
Determining the exact set for Go 1.10 is #18085.
Running vet also means that programs now have to type-check
with both cmd/compile and go/types in order to pass "go test".
We don't start vet until cmd/compile has built the test package,
so normally the added go/types check doesn't find anything.
However, there is at least one instance where go/types is more
precise than cmd/compile: declared and not used errors involving
variables captured into closures.
This CL includes a printf fix to os/os_test.go and many declared
and not used fixes in the race detector tests.
Fixes#18084.
Change-Id: I353e00b9d1f9fec540c7557db5653e7501f5e1c9
Reviewed-on: https://go-review.googlesource.com/74356
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This CL adds caching of successful test results, keyed by the
action ID of the test binary and its command line arguments.
Suppose you run:
go test -short std
<edit a typo in a comment in math/big/float.go>
go test -short std
Before this CL, the second go test would re-run all the tests
for the std packages. Now, the second go test will use the cached
result immediately (without any compile or link steps) for any
packages that do not transitively import math/big, and then
it will, after compiling math/big and seeing that the .a file didn't
change, reuse the cached test results for the remaining packages
without any additional compile or link steps.
Suppose that instead of editing a typo you made a substantive
change to one function, but you left the others (including their
line numbers) unchanged. Then the second go test will re-link
any of the tests that transitively depend on math/big, but it still
will not re-run the tests, because the link will result in the same
test binary as the first run.
The only cacheable test arguments are:
-cpu
-list
-parallel
-run
-short
-v
Using any other test flag disables the cache for that run.
The suggested argument to mean "turn off the cache" is -count=1
(asking "please run this 1 time, not 0").
There's an open question about re-running tests when inputs
like environment variables and input files change. For now we
will assume that users will bypass the test cache when they
need to do so, using -count=1 or "go test" with no arguments.
This CL documents the new cache but also documents the
previously-undocumented distinction between "go test" with
no arguments (now called "local directory mode") and with
arguments (now called "package list mode"). It also cleans up
a minor detail of package list mode buffering that used to change
whether test binary stderr was sent to go command stderr based
on details like exactly how many packages were listed or
how many CPUs the host system had. Clearly the file descriptor
receiving output should not depend on those, so package list mode
now consistently merges all output to stdout, where before it
mostly did that but not always.
Fixes#11193.
Change-Id: I120edef347b9ddd5b10e247bfd5bd768db9c2182
Reviewed-on: https://go-review.googlesource.com/75631
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
To improve readability when exported fields are removed,
forbid the printer from emitting an empty line before the first comment
in a const, var, or type block.
Also, when printing the "Has filtered or unexported fields." message,
add an empty line before it to separate the message from the struct
or interfact contents.
Before the change:
<<<
type NamedArg struct {
// Name is the name of the parameter placeholder.
//
// If empty, the ordinal position in the argument list will be
// used.
//
// Name must omit any symbol prefix.
Name string
// Value is the value of the parameter.
// It may be assigned the same value types as the query
// arguments.
Value interface{}
// contains filtered or unexported fields
}
>>>
After the change:
<<<
type NamedArg struct {
// Name is the name of the parameter placeholder.
//
// If empty, the ordinal position in the argument list will be
// used.
//
// Name must omit any symbol prefix.
Name string
// Value is the value of the parameter.
// It may be assigned the same value types as the query
// arguments.
Value interface{}
// contains filtered or unexported fields
}
>>>
Fixes#18264
Change-Id: I9fe17ca39cf92fcdfea55064bd2eaa784ce48c88
Reviewed-on: https://go-review.googlesource.com/71990
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This cuts 6 seconds off all.bash with the new go command.
Not a ton, but also an easy 6 seconds to grab.
The -tags=use_go_run in the misc/cgo tests is just some
go command flag that will make run.go use go run,
but without making everything look stale.
(Those tests have relative imports,
so go tool compile+link is not enough.)
Change-Id: I43bf4bb661d3adde2b2d4aad5e8f64b97bc69ba9
Reviewed-on: https://go-review.googlesource.com/73994
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL changes the go command to base all its rebuilding decisions
on the content of the files being processed and not their file system
modification times. It also eliminates the special handling of release
toolchains, which were previously considered always up-to-date
because modification time order could not be trusted when unpacking
a pre-built release.
The go command previously tracked "build IDs" as a backup to
modification times, to catch changes not reflected in modification times.
For example, if you remove one .go file in a package with multiple .go
files, there is no modification time remaining in the system that indicates
that the installed package is out of date. The old build ID was the hash
of a list of file names and a few other factors, expected to change if
those factors changed.
This CL moves to using this kind of build ID as the only way to
detect staleness, making sure that the build ID hash includes all
possible factors that need to influence the rebuild decision.
One such factor is the compiler flags. As of this CL, if you run
go build -gcflags -N cmd/gofmt
you will get a gofmt where every package is built with -N,
regardless of what may or may not be installed already.
Another such factor is the linker flags. As of this CL, if you run
go install myprog
go install -ldflags=-s myprog
the second go install will now correctly build a new myprog with
the updated linker flags. (Previously the installed myprog appeared
up-to-date, because the ldflags were not included in the build ID.)
Because we have more precise information we can also validate whether
the target of a "go test -c" operation is already the right binary and
therefore can avoid a rebuild.
This CL sets us up for having a more general build artifact cache,
maybe even a step toward not having a pkg directory with .a files,
but this CL does not take that step. For now the result of go install
is the same as it ever was; we just do a better job of what needs to
be installed.
This CL does slow down builds a small amount by reading all the
dependent source files in full. (The go command already read the
beginning of every dependent source file to discover build tags
and imports.) On my MacBook Pro, before this CL all.bash takes
3m58s, while after this CL and a few optimizations stacked above it
all.bash takes 4m28s. Given that CL 73850 cut 1m43s off the all.bash
time earlier today, we can afford adding 30s back for now.
More optimizations are planned that should make the go command
more efficient than it was even before this CL.
Fixes#15799.
Fixes#18369.
Fixes#19340.
Fixes#21477.
Change-Id: I10d7ca0e31ca3f58aabb9b1f11e2e3d9d18f0bc9
Reviewed-on: https://go-review.googlesource.com/73212
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The upcoming CL 73212 will see through mtime modifications.
Change the underlying file too.
Change-Id: Ib23b4136a62ee87bce408b76bb0385451ae7dcd2
Reviewed-on: https://go-review.googlesource.com/74130
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Both the linker and the plugin package were inconsistent
about when they applied the path encoding defined in
objabi.PathToPrefix. As a result, only some symbols from
a package path that required encoding were being found.
So always encoding the path.
Fixes#22295
Change-Id: Ife86c79ca20b2e9307008ed83885e193d32b7dc4
Reviewed-on: https://go-review.googlesource.com/72390
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Running test.bash goes from 30s to 10s on a linux workstation.
(The coming pkg cache work in cmd/go would presumably do the same thing,
but this makes all.bash faster today.)
Change-Id: I8c9b0400071a412fce55b386e939906bb1c1d84d
Reviewed-on: https://go-review.googlesource.com/72330
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Previously, cover printed directives (//go: comments) near the top of
the file unless they were in doc comments. However, directives
frequently apply to specific definitions, and they are not written in
doc comments to prevent godoc from printing them. Moving all
directives to the top of the file affected semantics of tests.
With this change, directives are kept together with the following
top-level declarations. Only directives that occur after all top-level
declarations are moved.
Fixes#22022
Change-Id: Ic5c61c4d3969996e4ed5abccba0989163789254c
Reviewed-on: https://go-review.googlesource.com/69630
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Reviewed-by: Alan Donovan <adonovan@google.com>
Currently we look to see if the main.main symbol address is in the
module data text range. This requires access to the main.main
symbol, which usually the runtime has, but does not when building
a plugin.
To avoid a dynamic relocation to main.main (which I haven't worked
out how to have the linker generate on darwin), stop using the
symbol. Instead record a boolean in the moduledata if the module
has the main function.
Fixes#22175
Change-Id: If313a118f17ab499d0a760bbc2519771ed654530
Reviewed-on: https://go-review.googlesource.com/69370
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Starting in gcc 6, -pie is passed to the linker by default
on some platforms, including ppc64le. If the objects
being linked are not built for -pie then in some cases the
executable could be in error. To avoid that problem, -no-pie
should be used with gcc to override the default -pie option
and generate a correct executable that can be run without error.
Fixes#22126
Change-Id: I4a052bba8b9b3bd6706f5d27ca9a7cebcb504c95
Reviewed-on: https://go-review.googlesource.com/70072
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This CL does a few things.
1. It moves the existing "read a build ID" code out of the go command
and into cmd/internal/buildid.
2. It adds new code there to "write a build ID".
3. It adds better tests.
4. It encapsulates cmd/internal/buildid into a new standalone program
"go tool buildid".
The go command is going to use the new "write a build ID" functionality
in a future CL. Adding the separate "go tool buildid" gives "go build -x"
a printable command to explain what it is doing in that new step.
(This is similar to the go command printing "go tool pack" commands
equivalent to the actions it is taking, even though it's not invoking pack
directly.) Keeping go build -x honest means that other build systems can
potentially keep up with the go command.
Change-Id: I01c0a66e30a80fa7254e3f2879283d3cd7aa03b4
Reviewed-on: https://go-review.googlesource.com/69053
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Everything got a bit tangled together in b.action1.
Try to tease things apart again.
In general this is a refactoring of the existing code, with limited
changes to the effect of the code.
The main additional change is to complete a.Deps for link actions.
That list now directly contains all the inputs the linker will attempt
to read, eliminating the need for a transitive traversal of the entire
action graph to find those. The comepleteness of a.Deps will be
important when we eventually use it to decide whether an cached
action output can be reused.
all.bash passes, but it's possible I've broken some subtety of
buildmode=shared again. Certainly that code took the longest
to get working.
Change-Id: I34e849eda446dca45a9cfce02b07bec6edb6d0d4
Reviewed-on: https://go-review.googlesource.com/69831
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Updates #11058
Change-Id: I2a8bf4403b680ab8bf06fff18291f3bf67261e27
Reviewed-on: https://go-review.googlesource.com/69090
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Otherwise we end up with testp?.exe files after the tests run.
Updates #11058
Change-Id: Ieccfc42da6192622bdab1f9a411ccd50bb59fd5b
Reviewed-on: https://go-review.googlesource.com/68770
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TestUnexportedSymbols requires dup2 that
my gcc installation does not have.
TestSignalHandlersWithNotify fails with:
undefined: syscall.SIGIO.
TestSignalHandlers fails with:
sched.h: No such file or directory.
TestExportedSymbolsWithDynamicLoad fails with:
dlfcn.h: No such file or directory.
Also add t.Helper calls to better error messages.
Updates #11058
Change-Id: I7eb514968464256b8337e45f57fcb7d7fe0e4693
Reviewed-on: https://go-review.googlesource.com/68410
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Moves type symbol name mangling out of the object reader
and into a separate pass. Requires some care, as changing
the name of a type may require dealing with duplicate
symbols for the first time.
Disables DWARF for both plugins and programs that use plugin.Open,
because type manging is currently incompatible with the go.info.*
symbol generator in cmd/link. (It relies on the symbol names to
find type information.) A future fix for this would be moving the
go.info.* generation into the compiler, with the logic we use
for generating the type.* symbols.
Fixes#19529
Change-Id: I75615f8bdda86ff9e767e536d9aa36e15c194098
Reviewed-on: https://go-review.googlesource.com/67312
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The lldb child process is killed if a test runs too long. Also
kill it when the setup times out (and is retried).
Might help with builder flakes where all 5 attempts to start up
lldb fail even though the tests before and after the timeouts
succeed. For example:
...
ok vendor/golang_org/x/net/route 37.797s
lldb setup error: command timeout (lldb start for 17s)
start timeout, trying again
lldb setup error: command timeout (lldb start for 17s)
start timeout, trying again
lldb setup error: command timeout (lldb start for 17s)
start timeout, trying again
lldb setup error: command timeout (lldb start for 17s)
start timeout, trying again
lldb setup error: command timeout (lldb start for 17s)
go_darwin_arm_exec: failed to start test harness (retry attempted)
FAIL vendor/golang_org/x/text/transform 115.185s
ok vendor/golang_org/x/text/unicode/norm 122.773s
...
Change-Id: I6638860522896491dccfa12f1e520c0f23df6d66
Reviewed-on: https://go-review.googlesource.com/67791
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is a step toward using cached build artifacts: the importcfg
will direct the compiler and linker to read them right from the cache
if necessary. However, this CL does not have a cache yet, so it still
reads them from the usual install location or build location.
Even so, this fixes a long-standing issue that -I and -L (no longer used)
are not expressive enough to describe complex GOPATH setups.
Shared libraries are handled enough that all.bash passes, but
there may still be more work to do here. If so, tests and fixes
can be added in follow-up CLs.
Gccgo will need updating to support -importcfg as well.
Fixes#14271.
Change-Id: I5c52a0a5df0ffbf7436e1130c74e9e24fceff80f
Reviewed-on: https://go-review.googlesource.com/56279
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When rewriting loads and stores accessing global variables to use the
GOT we were making use of REGTMP (R10). Unfortunately loads and stores
with large offsets (larger than 20-bits) were also using REGTMP,
causing it to be clobbered and subsequently a segmentation fault.
This can be fixed by using REGTMP2 (R11) for the rewrite. This is fine
because REGTMP2 only has a couple of uses in the assembler (division,
high multiplication and storage-to-storage instructions). We didn't
use REGTMP2 originally because it used to be used more frequently,
in particular for stores of constants to memory. However we have now
eliminated those uses.
This was found while writing a test case for CL 63030. That test case
is included in this CL.
Change-Id: I13956f1f3ca258a7c8a7ff0a7570d2848adf7f68
Reviewed-on: https://go-review.googlesource.com/65011
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It's not needed, and the current expectation is that it will go away
in the future.
Change-Id: I5f46800e748d9ffa484bda6d1738290c8e00ac2b
Reviewed-on: https://go-review.googlesource.com/63751
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
rune has a well-defined size, but C.int is implementation-specified.
Using one as the other should require an explicit conversion.
updates #13467
Change-Id: I53ab2478427dca790efdcc197f6b8d9fbfbd1847
Reviewed-on: https://go-review.googlesource.com/63730
Reviewed-by: Ian Lance Taylor <iant@golang.org>
I had passed 1 instead of 2 to the SplitAfterN call in
errorstest.check, so all of the cases were erroneously falling through
to the non-regexp case (and passing even if the actual error didn't
match).
Now, we use bytes.HasSuffix to check for the non-regexp case, so we
will not incorrectly match a regexp comment to the non-regexp case.
updates #13467
Change-Id: Ia6be928a495425f2b7bae5001bd01346e115dcfa
Reviewed-on: https://go-review.googlesource.com/63692
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This makes the test easier to run in isolation and easier to change,
and simplifies the code to run the tests in parallel.
updates #13467
Change-Id: I5622b5cc98276970347da18e95d071dbca3c5cc1
Reviewed-on: https://go-review.googlesource.com/63276
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Previously, test7978 failed if the user did not invoke it with
GOTRACEBACK=2 already set in their environment. Environment-sensitive
test are awkward, and in this case there is a very simple workaround:
set the traceback level to the necessary value explicitly.
Change-Id: I7d576f24138aa8a41392148eae11bbeaef558573
Reviewed-on: https://go-review.googlesource.com/63275
Run-TryBot: Bryan Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 62593 broken TestExportedSymbols and TestUnexportedSymbols
because it started executing android test binary on host.
Make them run on android.
Hopefully fixes android build.
Change-Id: Ic0bb9f0cbbefca23828574282caa33a03ef72431
Reviewed-on: https://go-review.googlesource.com/62830
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Elias Naur <elias.naur@gmail.com>
Change-Id: Ib35bb7fc9c5b4ccc9b8e1bd16443e0b307be9406
Reviewed-on: https://go-review.googlesource.com/62593
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fixes#21809
Change-Id: Ic43077c6bea3c7cdc9611e74abf07b6deab70433
Reviewed-on: https://go-review.googlesource.com/62670
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: Id1b5939cfcd210a0cb5f61915ce2d077c7fcec11
Reviewed-on: https://go-review.googlesource.com/62592
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The noopt builder sets GO_GCFLAGS when building the standard library.
Set it when building plugins to ensure the -shared packages built for it
have the same inlining in the export data (and thus the same package
version).
Tested locally with GO_GCFLAGS="-N -l" ./all.bash
Fixes#17937
Change-Id: Id037cfbf4af744c05c47bdc58eea60a5dba69533
Reviewed-on: https://go-review.googlesource.com/62511
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
1. remove broken verification
The runtime check assumes that no-pcln symbol entry have zero value,
but the linker emit no entries if the symbol is no-pcln.
As a result, if there are no-pcln symbols at the very end of pcln
table, it will panic.
2. correct condition of export
Handle special chracters in pluginpath correcty.
Export "go.itab.*", so different plugins can share the same itab.
Fixes#18190
Change-Id: Ia4f9c51d83ce8488a9470520f1ee9432802cfc1d
Reviewed-on: https://go-review.googlesource.com/61091
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Along the way, track bad modules. Make sure they don't end up on
the active modules list, and aren't accidentally reprocessed as
new plugins.
Fixes#19004
Change-Id: I8a5e7bb11f572f7b657a97d521a7f84822a35c07
Reviewed-on: https://go-review.googlesource.com/61171
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It is common to have multiple plugins built from ephemeral
source files all with the same name:
# generate main.go
go build -buildmode=plugin -o=p1.so main.go
# rm main.go, generate new main.go
go build -buildmode=plugin -o=p2.so main.go
...
These different plugins currently have the same build ID,
and hence the same package path. This means only one can be
loaded.
To remove this restriction, this commit adds the contents of the
main package source files to the plugin hash.
Fixes#19358
Change-Id: Icd42024b085feb29c09c2771aaecb85f8b528dd3
Reviewed-on: https://go-review.googlesource.com/61170
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When compiling a plugin, package main gets a new name so as not to
conflict with the main package in the host binary, or any other
plugins. It is already defined by cmd/go, and used by cmd/link when
filling out the "" package placeholder in symbols.
With this CL, the plugin-specific name for main is also passed to
cmd/compile's -p flag. This is used to fill out the pkgpath field
of types, and ensures that two types defined in two different plugin
mains with the same name will not be mistaken for one another at
runtime.
Fixes#21386
Change-Id: I8a646d8d7451caff533fe0007343ea8b8e1704ed
Reviewed-on: https://go-review.googlesource.com/60910
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The approach of https://golang.org/cl/43476 turned out incorrect.
The problem is that the sniff introduced by the CL only work for simple
expression. And when it fails it fallback to uint64, not int64, which
breaks backward compatibility.
In this CL, we use DWARF for guessing kind instead. That should be more
reliable than previous approach. And importanly, it fallbacks to int64 even
if it fails to guess kind.
Fixes#21708
Change-Id: I39a18cb2efbe4faa9becdcf53d5ac68dba180d46
Reviewed-on: https://go-review.googlesource.com/60510
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently, cgo supports only macros which can be reduced to constants
or variables. The CL addresses remaining parts, macros which can be
represented as niladic functions.
The basic idea is simple:
1. make a thin wrapper function per macros.
2. replace macro expansions with function calls.
Fixes#10715Fixes#18720
Change-Id: I150b4fb48e9dc4cc34466ef6417c04ac93d4bc1a
Reviewed-on: https://go-review.googlesource.com/43970
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Current code uses names like "x" and "s" which can conflict with user's
code easily. Use cryptographic names.
Fixes#21668
Change-Id: Ib6d3d6327aa5b92d95c71503d42e3a79d96c8e15
Reviewed-on: https://go-review.googlesource.com/59710
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When running multiple iOS builds on the same host, GOIOS_DEVICE_ID
is used to distinguish the devices. To improve support,
- Only restart the particular device when invoking iostest.bash
with the -restart flag.
- Make the exec wrapper lock file per-device.
For the iOS builder.
Change-Id: Id6f222981f25036399a43c3202a393dba89d87cb
Reviewed-on: https://go-review.googlesource.com/57970
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Generated with
github.com/catapult/tracing/bin/vulcanize_trace_viewer
catapult @ ab4d571fa
Renamed trace_viewer_lean.html to trace_viewer_full.html
to make it clear we are using the full version of trace viewer
(waiting for https://github.com/catapult-project/catapult/issues/2247
to be fixed).
Update #15302
Change-Id: Ice808bb27ab79a1dec9fc863e0c5a761027ebfbe
Reviewed-on: https://go-review.googlesource.com/58750
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
If set, GOIOS_DEVICE_ID specifies the device id for the iOS exec
wrapper. With that, a single builder can host multiple iOS devices.
Change-Id: If3cc049552f5edbd7344befda7b8d7f73b4236e2
Reviewed-on: https://go-review.googlesource.com/57296
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: JBD <jbd@google.com>
Reviewed-by: Chris Broadfoot <cbro@golang.org>
This reverts commit a6ffab6b67.
Reason for revert: with CL 57290 the tests run on Android again.
Change-Id: Ifeb29762a4cd0178463acfeeb3696884d99d2993
Reviewed-on: https://go-review.googlesource.com/57310
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
The testcshared test.bash was rewritten in Go, but the rewritten script
broke on Android. Make the tests run on Android again by:
- Restoring the LD_LIBRARY_PATH path (.).
- Restoring the Android specific C flags (-pie -fuse-ld=gold).
- Adding runExe to run test executables. All other commands must run on
the host.
Fixes#21513.
Change-Id: I3ea617a943c686b15437cc5c118e9802a913d93a
Reviewed-on: https://go-review.googlesource.com/57290
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Hopefully this will fix android build.
Maybe fixes#21513
Change-Id: I98f760562646f06b56e385c36927e79458465b92
Reviewed-on: https://go-review.googlesource.com/56790
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Another attempt to fix build
Change-Id: I26137c115ad4b5f5a69801ed981c146adf6e824c
Reviewed-on: https://go-review.googlesource.com/56750
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Hopefully fixes build.
Change-Id: If0629b95b923a65e4507073cf7aa44a5e178fc0f
Reviewed-on: https://go-review.googlesource.com/56711
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
This makes it much easier to run individual failing subtests.
Use $(go env CC) instead of always defaulting to clang; this makes it
easier to test with other compilers.
Run C binaries to detect incompatible compiler/kernel pairings instead
of sniffing versions.
updates #21196
Change-Id: I0debb3cc4a4244df44b825157ffdc97b5c09338d
Reviewed-on: https://go-review.googlesource.com/52910
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
When calling a Go function that returns multiple values from C, cgo
generates a structure to hold the values. According to the documentation
this structure is called `struct <function-name>_return`. When compiling
for gccgo the generated structure name is `struct <function-name>_result`.
This change updates the output for gccgo to match the documentation and
output for gc.
Fixes#20910
Change-Id: Iaea8030a695a7aaf9d9f317447fc05615d8e4adc
Reviewed-on: https://go-review.googlesource.com/49350
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This should fix NaCl build failure for CL 49530.
Change-Id: Id9a54f0c81b1b5db5b5efb12a2ad6509c4ab42b3
Reviewed-on: https://go-review.googlesource.com/55770
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Otherwise, some test flags don't work.
Change-Id: Iacf3930d0eec28e4d690cd382adbb2ecf866a0e2
Reviewed-on: https://go-review.googlesource.com/55615
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Just like https://golang.org/cl/34783
Given cgo.go:
1 package main
2
3 /*
4 long double x = 0;
5 */
6 import "C"
7
8 func main() {
9 _ = C.x
10 _ = C.x
11 }
Before:
./cgo.go:10:6: unexpected: 16-byte float type - long double
After:
./cgo.go:9:6: unexpected: 16-byte float type - long double
The above test case is not portable. So it is tested on only amd64.
Change-Id: If0b84cf73d381a22e2ada71c8e9a6e6ec77ffd2e
Reviewed-on: https://go-review.googlesource.com/54950
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The activeModules function is called by the cgo pointer checking code,
which is called by the write barrier (when GODEBUG=cgocheck=2), and as
such must be nosplit/nowritebarrier.
Fixes#21306
Change-Id: I57f2124f14de7f3872b2de9532abab15df95d45a
Reviewed-on: https://go-review.googlesource.com/53352
Reviewed-by: Austin Clements <austin@google.com>
Check not only that a tsan program can be built, but also that it runs.
This fails with some installations of GCC 7.
Skip the tsan10 program when using GCC, as it reportedly hangs.
This is a patch to help people build 1.9; we may be able to do a
better fix for 1.10.
Updates #21196
Change-Id: Icd1ffbd018dc65a97ff45cab1264b9b0c7fa0ab2
Reviewed-on: https://go-review.googlesource.com/52790
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Bryan Mills <bcmills@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
http://golang.org/cl/50251 fixed a regression under TSAN.
This change adds a minimal reproducer for the observed symptom.
Change-Id: Ib9ad01b458b7fdec14d6c2fe3c243f9c64b3dcf2
Reviewed-on: https://go-review.googlesource.com/50371
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
clang can emit some dwarf.VoidType which are wrapped by multiple
dwarf.TypedefType. We need to unwrap those before further processing.
Fixes#20129
Change-Id: I671ce6aef2dc7b55f1a02aec5f9789ac1b369643
Reviewed-on: https://go-review.googlesource.com/44772
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
With current GCC a macro that refers to another macro can report an
error on the macro definition line, with a note on the use.
When cgo is trying to decide which line an error refers to,
it is looking at the uses. So if we see an error on a line that we
don't recognize followed by a note on a line that we do recognize,
treat the note as an error.
Fixes#20125.
Change-Id: I389cd0eb7d56ad2d54bef70e278d9f76c4d36448
Reviewed-on: https://go-review.googlesource.com/44290
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Hiroshi Ioka <hirochachacha@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For test.go:
package main
import (
"C"
"fmt"
)
func main() {
fmt.Println("Hello, world!")
C.no_such_f()
}
Before:
could not determine kind of name for C.no_such_f
After:
./test.go:10:2: could not determine kind of name for C.no_such_f
Fixes#18452
Change-Id: I49c136b7fa60fab25d2d5b905d440fe4d106e565
Reviewed-on: https://go-review.googlesource.com/34783
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Current code cannot handle string #define macros if those macros are
defined via other macros. This CL solve the issue.
Updates #18720
Change-Id: Ibed0773d10db3d545bb246b97e81c0d19e3af3d5
Reviewed-on: https://go-review.googlesource.com/41312
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, cgo converts integer macros into int64 if it's possible.
As a result, some macros which satisfy
math.MaxInt64 < x <= math.MaxUint64
will lose their original values.
This CL introduces the new probe to check signs,
so we can handle signed ints and unsigned ints separately.
Fixes#20369
Change-Id: I002ba452a82514b3a87440960473676f842cc9ee
Reviewed-on: https://go-review.googlesource.com/43476
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In PPC64 ELF files, the st_other field indicates the number of
prologue instructions between the global and local entry points.
We add the instructions in the compiler and assembler if -shared is used.
We were assuming that the instructions were present when building a
c-archive or PIE or doing dynamic linking, on the assumption that those
are the cases where the go tool would be building with -shared.
That assumption fails when using some other tool, such as Bazel,
that does not necessarily use -shared in exactly the same way.
This CL records in the object file whether a symbol was compiled
with -shared (this will be the same for all symbols in a given compilation)
and uses that information when setting the st_other field.
Fixes#20290.
Change-Id: Ib2b77e16aef38824871102e3c244fcf04a86c6ea
Reviewed-on: https://go-review.googlesource.com/43051
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
On Android, the exec wrapper passes on output from adb to its parent
process by passing on os.Stderr and os.Stdout to adb. If the adb
process somehow hangs, it will keep stderr and stdout will open, in turn
blocking go test from ever returning from its cmd.Wait() even though
it has killed the exec wrapper process.
Break the short circuit by introducing a wrapper between adb and the
exec wrapper, preventing os/exec.Run from passing along the raw
file descriptors for os.Stdout and os.Stderr.
(Hopefully) fixes occasional indefinite hangs on the Android builder.
Change-Id: I1188211fbde79b4a66bf93ff8e9d0091abf34560
Reviewed-on: https://go-review.googlesource.com/42271
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The "lldb start" phase often times out on the iOS builder. Increase
the timeout and see if that helps.
Change-Id: I92fd67cbfa90659600e713198d6b2c5c78dde20f
Reviewed-on: https://go-review.googlesource.com/41863
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Here we restrict using cgo builtin references because internally they're go functions
as opposed to C usafe.Pointer values.
Fixes#18889
Change-Id: I1e4332e4884063ccbaf9772c172d4462ec8f3d13
Reviewed-on: https://go-review.googlesource.com/40934
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Previously the "ABI hash" for a package (used to determine if a loaded shared
library has the ABI expected by its loader) was the hash of the entire
__.PKGDEF file. But that means it depends on the build ID generated by the go
tool for the package, which means that if a file is added (even a .c or .h
file!) to the package, the ABI changes, perhaps uncessarily.
Fixes#19920
Change-Id: If919481e1a03afb350c8a9c7a0666bb90ee90270
Reviewed-on: https://go-review.googlesource.com/40401
Run-TryBot: Michael Hudson-Doyle <michael.hudson@canonical.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Some tests need the src/runtime/textflag.h file. Make sure it is
included in iOS test runs.
Change-Id: I5e0e7ebe85679686ef15a7d336f28ac9b68a587a
Reviewed-on: https://go-review.googlesource.com/40915
Run-TryBot: Elias Naur <elias.naur@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Prior to this CL, flags such as NOSPLIT
on ATEXT Progs were stored in From3.Offset.
Some but not all of those flags were also
duplicated into From.Sym.Attribute.
This CL migrates all of those flags into
From.Sym.Attribute and stops creating a From3.
A side-effect of this is that printing an
ATEXT Prog can no longer simply dump From3.Offset.
That's kind of good, since the raw flag value
wasn't very informative anyway, but it did
necessitate a bunch of updates to the cmd/asm tests.
The reason I'm doing this work now is that
avoiding storing flags in both From.Sym and From3.Offset
simplifies some other changes to fix the data
race first described in CL 40254.
This CL almost passes toolstash-check -all.
The only changes are in cases where the assembler
has decided that a function's flags may be altered,
e.g. to make a function with no calls in it NOSPLIT.
Prior to this CL, that information was not printed.
Sample before:
"".Ctz64 t=1 size=63 args=0x10 locals=0x0
0x0000 00000 (/Users/josh/go/tip/src/runtime/internal/sys/intrinsics.go:35) TEXT "".Ctz64(SB), $0-16
0x0000 00000 (/Users/josh/go/tip/src/runtime/internal/sys/intrinsics.go:35) FUNCDATA $0, gclocals·f207267fbf96a0178e8758c6e3e0ce28(SB)
Sample after:
"".Ctz64 t=1 nosplit size=63 args=0x10 locals=0x0
0x0000 00000 (/Users/josh/go/tip/src/runtime/internal/sys/intrinsics.go:35) TEXT "".Ctz64(SB), NOSPLIT, $0-16
0x0000 00000 (/Users/josh/go/tip/src/runtime/internal/sys/intrinsics.go:35) FUNCDATA $0, gclocals·f207267fbf96a0178e8758c6e3e0ce28(SB)
Observe the additional "nosplit" in the first line
and the additional "NOSPLIT" in the second line.
Updates #15756
Change-Id: I5c59bd8f3bdc7c780361f801d94a261f0aef3d13
Reviewed-on: https://go-review.googlesource.com/40495
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Prevent a crash if the same type in two plugins had a recursive
definition, either by referring to a pointer to itself or a map existing
with the type as a value type (which creates a recursive definition
through the overflow bucket type).
Fixes#19258
Change-Id: Iac1cbda4c5b6e8edd5e6859a4d5da3bad539a9c6
Reviewed-on: https://go-review.googlesource.com/40292
Run-TryBot: Todd Neal <todd@tneal.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The hardware divider is an optional component of ARMv7. This patch
detects whether it is available in runtime and use it or not.
1. The hardware divider is detected at startup and a flag is set/clear
according to a perticular bit of runtime.hwcap.
2. Each call of runtime.udiv will check this flag and decide if
use the hardware division instruction.
A rough test shows the performance improves 40-50% for ARMv7. And
the compatibility of ARMv5/v6 is not broken.
fixes#19118
Change-Id: Ic586bc9659ebc169553ca2004d2bdb721df823ac
Reviewed-on: https://go-review.googlesource.com/37496
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Current code doesn't support floating point #define macros.
This CL compiles floats to a object file and retrive values from it.
That approach is the same work as we've already done for integers.
Updates #18720
Change-Id: I88b7ab174d0f73bda975cf90c5aeb797961fe034
Reviewed-on: https://go-review.googlesource.com/35511
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Without this, the load fails during kernel exec, which results in the
mysterious and completely uninformative "Killed: 9" error.
It appears that the stars (or at least the inputs) were properly aligned
with earlier versions of Xcode so that this happened accidentally.
Make it happen on purpose.
Gregory Man bisected the breakage to this change in LLVM,
which fits the theory nicely:
https://github.com/llvm-mirror/llvm/commit/9a41e59cFixes#19734.
Change-Id: Ice67a09af2de29d3c0d5e3fcde6a769580897c95
Reviewed-on: https://go-review.googlesource.com/38854
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The gold linker is used by default in the Android NDK, except on
arm64:
https://github.com/android-ndk/ndk/issues/148
The Go linker already forces the use of the gold linker on arm and
arm64 (CL 22141) for other reasons. However, the test.bash script in
testcshared doesn't, resulting in linker errors on android/arm64:
warning: liblog.so, needed by ./libgo.so, not found (try using -rpath or
-rpath-link)
Add -fuse-ld=gold when running testcshared on Android. Fixes the
android/arm64 builder.
Change-Id: I35ca96f01f136bae72bec56d71b7ca3f344df1ed
Reviewed-on: https://go-review.googlesource.com/38832
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
POSIX Shell only supports = to compare variables inside '[' tests. But
this is Bash, where == is an alias for =. In practice they're the same,
but the current form is inconsisnent and breaks POSIX for no good
reason.
Change-Id: I38fa7a5a90658dc51acc2acd143049e510424ed8
Reviewed-on: https://go-review.googlesource.com/38031
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Compiler errors now show the exact line and line byte offset (sometimes
called "column") of where an error occured. For `go tool compile x.go`:
package p
const c int = false
//line foo.go:123
type t intg
reports
x.go:2:7: cannot convert false to type int
foo.go:123[x.go:4:8]: undefined: intg
(Some errors use the "wrong" position for the error message; arguably
the byte offset for the first error should be 15, the position of 'false',
rathen than 7, the position of 'c'. But that is an indepedent issue.)
The byte offset (column) values are measured in bytes; they start at 1,
matching the convention used by editors and IDEs.
Positions modified by //line directives show the line offset only for the
actual source location (in square brackets), not for the "virtual" file and
line number because that code is likely generated and the //line directive
only provides line information.
Because the new format might break existing tools or scripts, printing
of line offsets can be disabled with the new compiler flag -C. We plan
to remove this flag eventually.
Fixes#10324.
Change-Id: I493f5ee6e78457cf7b00025aba6b6e28e50bb740
Reviewed-on: https://go-review.googlesource.com/37970
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
A typo in the previous revision ("act" instead of "oldact") caused us
to return the sa_flags from the new (or zeroed) sigaction rather than
the old one.
In the presence of a signal handler registered before
runtime.libpreinit, this caused setsigstack to erroneously zero out
important sa_flags (such as SA_SIGINFO) in its attempt to re-register
the existing handler with SA_ONSTACK.
Change-Id: I3cd5152a38ec0d44ae611f183bc1651d65b8a115
Reviewed-on: https://go-review.googlesource.com/37852
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
There are a few problems from change 35494, discovered during testing
of change 37852.
1. I was confused about the usage of n.key in the sema variant, so we
were looping on the wrong condition. The error was not caught by
the TryBots (presumably due to missing TSAN coverage in the BSD and
darwin builders?).
2. The sysmon goroutine sometimes skips notetsleep entirely, using
direct usleep syscalls instead. In that case, we were not calling
_cgo_yield, leading to missed signals under TSAN.
3. Some notetsleep calls have long finite timeouts. They should be
broken up into smaller chunks with a yield at the end of each
chunk.
updates #18717
Change-Id: I91175af5dea3857deebc686f51a8a40f9d690bcc
Reviewed-on: https://go-review.googlesource.com/37867
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
write(2) is defined in unistd.h.
For the iOS builder.
Change-Id: I411ffe81988d8fbafffde89e4732a20af1a63325
Reviewed-on: https://go-review.googlesource.com/37962
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The iOS test harness was recently changed in response to lldb bugs
to replace breakpoints with the SIGUSR2 signal (CL 34926), and to
pass the current directory in the test binary arguments (CL 35152).
Both the signal sending and working directory setup is done from
the go test driver.
However, the new method doesn't work with tests where a C program is
the test driver instead of go test: the current working directory
will not be changed and SIGUSR2 is not raised.
Instead of copying that logic into any C test program, rework the
test harness (again) to move the setup logic to the early runtime
cgo setup code. That way, the harness will run even in the library
build modes.
Then, use the app Info.plist file to pass the working
directory, removing the need to alter the arguments after running.
Finally, use the SIGINT signal instead of SIGUSR2 to avoid
manipulating the signal masks or handlers.
Fixes the testcarchive tests on iOS.
With this CL, both darwin/arm and darwin/arm64 passes all.bash.
This CL replaces CL 34926, CL 35152 as well as the fixup CL
35123 and CL 35255. They are reverted in CLs earlier in the
relation chain.
Change-Id: I8485c7db1404fbd8daa261efd1ea89e905121a3e
Reviewed-on: https://go-review.googlesource.com/36090
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This reverts commit 333f764df3.
Replaced by a improved strategy later in the CL relation chain.
Change-Id: I70a1d2f0aa5aa0d3d0ec85b5a956c6fb60d88908
Reviewed-on: https://go-review.googlesource.com/36069
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This reverts commit 593ea3b360.
Replaced by a improved strategy later in the CL relation chain.
Change-Id: I6963e4d1bf38e7028cf545a953e28054d83548
Change-Id: I6963e4d1bf38e7028cf545a953e28054d8354870
Reviewed-on: https://go-review.googlesource.com/36067
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This reverts commit 467109bf56.
Replaced by a improved strategy later in the CL relation chain.
Change-Id: Ib90813b5a6c4716b563c8496013d2d57f9c022b8
Reviewed-on: https://go-review.googlesource.com/36066
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Import the github.com/google/pprof and github.com/ianlancetaylor/demangle
packages, without modification.
Build the golang version of pprof from cmd/pprof/pprof.go
by importing the packages from src/cmd/vendot/github.com/google/pprof
The versions upstreamed are:
github.com/ianlancetaylor/demangle 4883227f66371e02c4948937d3e2be1664d9be38
github.com/google/pprof 7eb5ba977f28f2ad8dd5f6bb82cc9b454e123cdc
Update misc/nacl/testzip.proto for new tests.
Change-Id: I076584856491353607a3b98b67d0ca6838be50d6
Reviewed-on: https://go-review.googlesource.com/36798
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This ensures that SIGPROF is handled correctly when using
runtime/pprof in a c-archive or c-shared library.
Separate profiler handling into pre-process changes and per-thread
changes. Simplify the Windows code slightly accordingly.
Fixes#18220.
Change-Id: I5060f7084c91ef0bbe797848978bdc527c312777
Reviewed-on: https://go-review.googlesource.com/34018
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
Before this CL, Go programs in c-archive or c-shared buildmodes
would not handle SIGPIPE. That leads to surprising behaviour where
writes on a closed pipe or socket would raise SIGPIPE and terminate
the program. This CL changes the Go runtime to handle
SIGPIPE regardless of buildmode. In addition, SIGPIPE from non-Go
code is forwarded.
This is a refinement of CL 32796 that fixes the case where a non-default
handler for SIGPIPE is installed by the host C program.
Fixes#17393
Change-Id: Ia41186e52c1ac209d0a594bae9904166ae7df7de
Reviewed-on: https://go-review.googlesource.com/35960
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TestMain doesn't make use of any flags.
Change-Id: I98ec582fb004045a5067618f605ccfeb1f9f4bbb
Reviewed-on: https://go-review.googlesource.com/33613
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Tests that use TestMain might never call m.Run(), and simply return
from TestMain. In that case, the iOS test harness never sees the
PASS from the testing framework and assumes the test failed.
Allow an exit with exit code 0 to also mean test success, thereby
fixing the objdump test on iOS.
Change-Id: I1fe9077b05931aa0905e41b88945cd153c5b35b6
Reviewed-on: https://go-review.googlesource.com/36065
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If -test.timeout is not specified to go test, it will time out after
a default 10 minutes.
The iOS exec wrapper also contains a fail safe timeout mechanism for
a stuck device. However, if no explicit -test.timeout is specified,
it will use a timeout of 0, plus some constant amount.
Use the same default timeout in the exec wrapper as for go test,
10 minutes.
Change-Id: I6465ccd9f7b9ce08fa302e6697f7938a0ea9af34
Reviewed-on: https://go-review.googlesource.com/36062
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The iOS exec wrapper use the constant bundle id "golang.gotest" for
running Go programs on iOS. However, that only happens to work on
the old iOS builders where their provisioning profile covers
that bundle id.
Expand the detection script to list all available provisioning
profiles for the attached device and include the bundle id in the
GOIOS_APP_ID environment variable.
To allow the old builders to continue, the "golang.gotest" bundle
id is used as a fallback if only the app id prefix is specified in
GOIOS_APP_ID.
For the new builders.
Change-Id: I8baa1d4d57f845de851c3fad3f178e05e9a01b17
Reviewed-on: https://go-review.googlesource.com/36060
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
On (at least) macOS 10.12, the `security cms` subcommand used by the
iOS detection script will output an error to stderr. The command
otherwise succeeds, but the extra line confuses a later parsing step.
To fix it, use only stdout and ignore stderr from every command run
by detect.go.
For the new iOS builders.
Change-Id: Iee426da7926d7f987ba1be061fa92ebb853ef53d
Reviewed-on: https://go-review.googlesource.com/36059
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Modules appear in the moduledata linked list in the order they are
loaded by the dynamic loader, with one exception: the
firstmoduledata itself the module that contains the runtime.
This is not always the first module (when using -buildmode=shared,
it is typically libstd.so, the second module).
The order matters for typelinksinit, so we swap the first module
with whatever module contains the main function.
Updates #18729
This fixes the test case extracted with -linkshared, and now
go test -linkshared encoding/...
passes. However the original issue about a plugin failure is not
yet fixed.
Change-Id: I9f399ecc3518e22e6b0a350358e90b0baa44ac96
Reviewed-on: https://go-review.googlesource.com/35644
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is needed for typical tests with gccgo, as it passes the
LD_LIBRARY_PATH environment variable to the new program.
Change-Id: I9bf4b0dbdff63f5449c7fcb8124eaeab10ed7f34
Reviewed-on: https://go-review.googlesource.com/35481
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
With GCC 7 (not yet released), cgo fails with errors like
./sigaltstack.go:65:8: call of non-function C.restoreSignalStack
I do not know precisely why. Explicitly declaring that there are no
arguments to the static function is a simple fix for the debug info.
Change-Id: Id96e1cb1e55ee37a9f1f5ad243d7ee33e71584ac
Reviewed-on: https://go-review.googlesource.com/35480
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We already do this for shared libraries. Do it for plugins also.
Suggestions on how to test this would be welcome.
I'd like to get this in for 1.8. It could lead to mysterious
hangs when using plugins.
Fixes#18676
Change-Id: I03209b096149090b9ba171c834c5e59087ed0f92
Reviewed-on: https://go-review.googlesource.com/35117
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
The working directory is now adjusted to match the typical Go test
working directory in main, as the old trick for adjusting earlier
stopped working with the latest version of LLDB bugs.
That means the small number of places where testdata files are
read before main is called no longer work. This CL adjusts those
reads to happen after main is called. (This has the bonus effect of
not reading some benchmark testdata files in all.bash.)
Fixes compress/bzip2, go/doc, go/parser, os, and time package
tests on the iOS builder.
Change-Id: If60f026aa7848b37511c36ac5e3985469ec25209
Reviewed-on: https://go-review.googlesource.com/35255
Run-TryBot: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Another change in behvaior (bug) in LLDB. Despite the fact that
LLDB can dump the symtab of our test binaries and show the function
addresses, it can no longer call the functions. This means the chdir
trick on signal is failing.
This CL uses a new trick. For iOS, the exec script passes the change
in directory as an argument, and it is processed early by the test
harness generated by cmd/go.
For the iOS builders.
Change-Id: I8f5d0f831fe18de99f097761f89c5184d5bf2afb
Reviewed-on: https://go-review.googlesource.com/35152
Reviewed-by: Elias Naur <elias.naur@gmail.com>
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Make sure that the same type and itab generated in two
different plugins are actually the same thing.
See also CL 35115
Change-Id: I0c1ecb039d7e2bf5a601d58dfa162a435ae4ef76
Reviewed-on: https://go-review.googlesource.com/35116
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
The iOS test harness has set a breakpoint early in the life of Go
programs so that it can change the current working directory using
information only available from the host debugger. Somewhere in the
upgrade to iOS 10 / XCode 8.2, breakpoints stopped working. This
may be an LLDB bug, or a bug in the ios-deploy LLDB scripts, it's
not clear.
Work around the problem by giving up on breakpoints. Instead, early
in the life of every test binary built for iOS, send (and ignore) a
SIGUSR2 signal. The debugger will catch this, giving the script
go_darwin_arm_exec a chance to change the working directory.
For the iOS builders.
Change-Id: I7476531985217d0c76bc176904c48379210576c2
Reviewed-on: https://go-review.googlesource.com/34926
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Make sure that the same type and itab generated in two
different shared library are actually the same thing.
Change-Id: Ica45862d65ff8bc7ad04d59a41f57223f71224cd
Reviewed-on: https://go-review.googlesource.com/35115
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Xcode 8.0 has been donen't support the iOS 5 anymore
Fixes#18390.
Change-Id: Icc97e09424780c610a8fe173d0cf461d76b06da4
Reviewed-on: https://go-review.googlesource.com/34673
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Wait longer in case the system is heavily loaded.
Fixes#18324.
Change-Id: If9a6da1cf32d0321302d244ee24fb3f80e54489d
Reviewed-on: https://go-review.googlesource.com/34653
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
