Compile time is about the same. Getting rid of the nodeSeq interfaces,
particularly nodeSeqIterate, should produce some improvements.
Passes toolstash -cmp.
Update #14473.
Change-Id: I678abafdd9129c6cccb0ec980511932eaed496a0
Reviewed-on: https://go-review.googlesource.com/20343
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
It is only necessary in a few places, and this inlining will
simplify the transition away from NodeLists.
Passes toolstash -cmp.
Change-Id: I4ee9b4bf56ffa04df23e20a0a83b302d36b33510
Reviewed-on: https://go-review.googlesource.com/20290
Reviewed-by: Ian Lance Taylor <iant@golang.org>
-test flag is a testing only flag that enables all vet checks. It was needed
because there was no way to run all vet checks in a single command
invocation. However it is possible to do this now by combining -all and -shadow
flags.
Also a recently added -tests flag is similarly named, having both -test and
-tests can be confusing.
Change-Id: Ie5bacbe0bef5c8409eeace46f16141fa4e782c32
Reviewed-on: https://go-review.googlesource.com/20006
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Opt for replacements that avoid any assumptions
about the representations in use.
Passes toolstash -cmp.
Change-Id: Ia858a33abcae344e03fc1862fc9b0e192fde80c1
Reviewed-on: https://go-review.googlesource.com/20279
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fix some test output while we're here.
Change-Id: I265cedc222e078eff120f268b92451e12b0400b2
Reviewed-on: https://go-review.googlesource.com/20294
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Fixes#14693
Change-Id: Id0a6a80b4c37c0b0f1c2755667b7233ed8964e40
Reviewed-on: https://go-review.googlesource.com/20342
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently work.finalizersDone is reset only at the beginning of
gcStart. As a result, it will be set when checkmark runs, so checkmark
will skip scanning finalizers. Hence, if there are any bugs that cause
the regular scan of finalizers to miss pointers, checkmark will also
miss them and fail to detect the missed pointer.
Fix this by resetting finalizersDone in gcResetMarkState. This way it
gets reset before any full mark, which is exactly what we want.
Change-Id: I4ddb5eba5b3b97e52aaf3e08fd9aa692bda32b20
Reviewed-on: https://go-review.googlesource.com/20332
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Rick Hudson <rlh@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In increment and decrement statements, explicit check that the type
of operand is numeric. This avoids a related but less clear error
about converting "1" to be emitted.
So, when checking
package main
func main() {
var x bool
x++
}
instead of emitting the error
prog.go:5:2: cannot convert 1 (untyped int constant) to bool
emits
prog.go:5:2: invalid operation: x++ (non-numeric type bool).
Updates #12525.
Change-Id: I00aa6bd0bb23267a2fe10ea3f5a0b20bbf3552bc
Reviewed-on: https://go-review.googlesource.com/20244
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Move initproginfo and initvariants to ppc64.Main to avoid checking that
the tables are initialised every time.
Change-Id: I95ff4146a7abc18c42a20bfad716cc80ea8367e5
Reviewed-on: https://go-review.googlesource.com/20286
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Fixes#14626
Change-Id: I91c40407dc35355e5c5046f24111a126f99260d9
Reviewed-on: https://go-review.googlesource.com/20192
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
As part of local testing with a large group member list, I discovered
that the lookup functions don't resize their buffer if they receive
ERANGE. I fixed this as a side-effect of this CL.
Thanks to @andrenth for the original CL.
Fixes#2617
Change-Id: Ie6aae2fe0a89eae5cce85786869a8acaa665ffe9
Reviewed-on: https://go-review.googlesource.com/19235
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The io.Reader contract makes no promises about how a Reader should
behave after it returns its first error. Usually the errors are
sticky, but they don't have to be. A regression in zlib.Reader (bug
accidentally relied on sticky errors.
Minimal fix: wrap the user's provided Reader in a Reader which
guarantees stickiness. The minimal fix is less scary than touching
the multipart state machine.
Fixes#14676
Change-Id: I8dd8814b13ae5530824ae0e68529f788974264a5
Reviewed-on: https://go-review.googlesource.com/20297
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Ensure that all errors (including io.EOF) are persistent across method
calls on zlib.Reader. Furthermore, ensure that these persistent errors
are properly cleared when Reset is called.
Fixes#14675
Change-Id: I15a20c7e25dc38219e7e0ff255d1ba775a86bb47
Reviewed-on: https://go-review.googlesource.com/20292
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Found by temporarily flipping fields from *NodeList to Nodes and fixing
all the compilation errors. This CL does not actually change any
fields.
Passes toolstash -cmp.
Update #14473.
Change-Id: Ib98fa37e8752f96358224c973a743618a6a0e736
Reviewed-on: https://go-review.googlesource.com/20320
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Eliminates type conversions in a bunch of Oconv(int(n.Op), ...) calls.
Notably, this identified a misuse of Oconv in amd64/gsubr.go to try to
print an assembly instruction op instead of a compiler node op.
Change-Id: I93b5aa49fe14a5eaf868b05426d3b8cd8ab52bc5
Reviewed-on: https://go-review.googlesource.com/20298
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Implementation more or less follows plan9_386 version.
Revised 7 March to correct a bug in runtime.seek and
tidy whitespace for 8-column tabs.
Change-Id: I2e921558b5816502e8aafe330530c5a48a6c7537
Reviewed-on: https://go-review.googlesource.com/18966
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Plan 9 trap/signal handling differs on ARM from other architectures
because ARM has a link register. Also trap message syntax varies
between different architectures (historical accident?).
Revised 7 March to clarify a comment.
Change-Id: Ib6485f82857a2f9a0d6b2c375cf0aaa230b83656
Reviewed-on: https://go-review.googlesource.com/18969
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
In increment and decrement statements, explicit check that the type
of operand is numeric earlier. This avoids a related but less clear
error about converting "1" to be emitted.
So, when compiling
package main
func main() {
var x bool
x++
}
instead of emitting two errors
prog.go:5: cannot convert 1 to type bool
prog.go:5: invalid operation: x++ (non-numeric type bool)
just emits the second error.
Fixes#12525.
Change-Id: I6e81330703765bef0d6eb6c57098c1336af7c799
Reviewed-on: https://go-review.googlesource.com/20245
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This increases the number of matches in make.bash
from 853 to 984.
Change-Id: I12697697a50ecd86d49698200144a4c80dd3e5a4
Reviewed-on: https://go-review.googlesource.com/20274
Reviewed-by: Todd Neal <todd@tneal.org>
We used to start background mark workers and assists at different
times, so we needed to keep track of these separately. They're now set
to exactly the same time, so clean things up by merging them in to one
value, markStartTime.
Change-Id: I17c9843c3ed2d6f07b4c8cd0b2c438fc6de23b53
Reviewed-on: https://go-review.googlesource.com/20143
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
OffPtr allocates less and is easier to optimize.
With this change, the OffPtr collapsing opt
rule matches increase from 160k to 263k,
and the Load-after-Store opt rule matches
increase from 217 to 853.
Change-Id: I763426a3196900f22a367f7f6d8e8047b279653d
Reviewed-on: https://go-review.googlesource.com/20273
Run-TryBot: Todd Neal <todd@tneal.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Todd Neal <todd@tneal.org>
Reviewed-by: Keith Randall <khr@golang.org>
This triggers an astonishing 160k times
during make.bash. The second biggest
generic rewrite triggers 100k times.
However, this is really just moving
rewrites that were happening at the
architecture level to the generic level.
Change-Id: Ife06fe5234f31433328460cb2e0741c071deda41
Reviewed-on: https://go-review.googlesource.com/20235
Run-TryBot: Todd Neal <todd@tneal.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Todd Neal <todd@tneal.org>
This only deals with the loads themselves. The bounds checks
are a separate issue. Also doesn't handle stores, those are
harder because we need to make sure intermediate memory states
aren't observed (which is hard to do with rewrite rules).
Use one byte shorter instructions for zero-extending loads.
Update #14267
Change-Id: I40af25ab5208488151ba7db32bf96081878fa7d9
Reviewed-on: https://go-review.googlesource.com/20218
Reviewed-by: Alexandru Moșoi <alexandru@mosoi.ro>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
They were only used for rtype.ptrToThis which David Crawshaw removed a couple
of weeks ago. Removes two traversals of Ctxt.Allsym from the linker but it
doesn't seem to make much difference to performance.
Change-Id: I5c305e0180186f643221d57822d301de4aa18827
Reviewed-on: https://go-review.googlesource.com/20287
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The new code is a bit less efficient,
but it does not involve altering the structure
of any linked lists.
This will make it easier to replace NodeLists
with Node slices.
We can return to a more efficient algorithm
when NodeLists have been replaced.
Passes toolstash -cmp.
Change-Id: I0bb5ee75e7c0646e6d37fe558c8f0548729d8aa1
Reviewed-on: https://go-review.googlesource.com/20277
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
No immediate reduction in the size of Addr.
Passes toolstash -cmp.
Change-Id: I78ea4c6e181b6e571ce70a5f1ae8158844eb197d
Reviewed-on: https://go-review.googlesource.com/20276
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Add tests to ensure that the size of important types don't change
unexpectedly.
Skip the test on nacl platforms because of their unusual padding
requirements.
Change-Id: Iddb127a99499e089a309b721f5073356c0da8b24
Reviewed-on: https://go-review.googlesource.com/20285
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Dave Cheney <dave@cheney.net>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Removes specialized functions for each verb and float/complex size
and replaces them with generic variants fmtFloat and
fmtComplex similar to other generic fmt functions.
Simplifies the complex formatting by relying on fmtFloat
to handle the verb and default precision selection.
Complex imaginary formatting does not need to clear the f.space flag
because the set f.plus flag will force a sign instead of a space.
Sets default precision for %b to -1 (same as %g and %G)
since precision for %b has no affect in strconv.AppendFloat.
Add more tests and group them a bit better.
Use local copies of +Inf,-Inf and NaN instead
of math package functions for testing.
Saves around 8kb in the go binary.
name old time/op new time/op delta
SprintfFloat-2 200ns ± 4% 196ns ± 4% -1.55% (p=0.007 n=20+20)
SprintfComplex-2 569ns ± 4% 570ns ± 3% ~ (p=0.804 n=20+20)
Change-Id: I36d35dab6f835fc2bd2c042ac97705868eb2446f
Reviewed-on: https://go-review.googlesource.com/20252
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Rob Pike <r@golang.org>
Reuse the internal buffer and use append versions of
the strconv quote functions to avoid some allocations.
Add more tests.
name old time/op new time/op delta
SprintfQuoteString-2 486ns ± 2% 416ns ± 2% -14.42% (p=0.000 n=20+20)
name old allocs/op new allocs/op delta
SprintfQuoteString-2 4.00 ± 0% 2.00 ± 0% -50.00% (p=0.000 n=20+20)
Change-Id: I63795b51fd95c53c5993ec8e6e99b659941f9f54
Reviewed-on: https://go-review.googlesource.com/20251
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Instead of calling printArg in fmtBytes to format each byte call
the byte formatting functions directly since it is known each
element is of type byte.
Add more tests for byte slice and array formatting.
name old time/op new time/op delta
SprintfBytes-2 843ns ±16% 417ns ±11% -50.58% (p=0.000 n=20+20)
Change-Id: I5b907dbf52091e3de9710b09d67649c76f4c17e9
Reviewed-on: https://go-review.googlesource.com/20176
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Current runtime.WriteHeapProfile() doesn't print correct
EnableGC. Even if GOGC=off, the result file has below line:
# EnableGC = true
It is hard to print correct status of the variable because of corner
cases e.g. initialization. For avoiding confusion, this commit removes
the print.
Change-Id: Ia792454a6c650bdc50a06fbaff4df7b6330ae08a
Reviewed-on: https://go-review.googlesource.com/18600
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
formatFloat should restore the original f.wid value before
returning. Callers should not have to save and restore f.wid.
Fixes: #14642
Change-Id: I531dae15c7997fe8909e2ad1ef7c376654afb030
Reviewed-on: https://go-review.googlesource.com/20179
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The new check corresponds to the (etype != TANY || Debug['A'] != 0)
that was lost in golang.org/cl/19936.
Fixes#14652.
Change-Id: Iec3788ff02529b3b0f0d4dd92ec9f3ef20aec849
Reviewed-on: https://go-review.googlesource.com/20271
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Instead make substArgTypes responsible for cloning the function
definition Node and the function signature Type tree.
Passes toolstash -cmp.
Change-Id: I9ec84c90a7ae83d164d3f578e84a91cf1490d8ab
Reviewed-on: https://go-review.googlesource.com/20239
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Update supportsUnaligned in xor.go to be true for
GOARCH values ppc64le and ppc64. This allows the
xor of long buffers to be done on double words
(8 bytes) instead of a single byte at a time, which
significantly improves performance.
Fixes#14350
Change-Id: Iccc6b9d3df2e604a55f4c1e4890bdd3bb0d77ab0
Reviewed-on: https://go-review.googlesource.com/19519
Reviewed-by: Minux Ma <minux@golang.org>
Also fix some uses of nodeSeqIterator.Len, and fix the implementation in
nodesIterator.
Passes toolstash -cmp.
Update #14473.
Change-Id: I228871470234b7f1314ffd2aae8a4c0624c35f98
Reviewed-on: https://go-review.googlesource.com/20231
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When the linker was written in C, command line arguments were passed
around as null-terminated byte arrays which encouraged checking
characters one at a time. In Go, that can easily lead to
out-of-bounds panics.
Use the more idiomatic strings.HasPrefix when checking cmd/link's -B
argument to avoid the panic, and replace the manual hex decode with
use of the encoding/hex package.
Fixes#14636
Change-Id: I45f765bbd8cf796fee1a9a3496178bf76b117827
Reviewed-on: https://go-review.googlesource.com/20211
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
