When running go tool compile,
go tool is running compile as a subprocess.
Killing go tool with Process.Kill leaves the subprocess behind.
Send an interrupt signal first, which it can forward on
to the compile subprocess.
Also report the timeout in errorcheck -t.
Change-Id: I7ae0029bbe543ed7e60e0fea790dd0739d10bcaa
Reviewed-on: https://go-review.googlesource.com/c/go/+/282313
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The files below had conflicts that required manual resolution.
The unresolved conflict in noder.go was just in the import
declaration (trivial). All the other conflicts are in tests
where the ERROR regex patterns changed to accomodate gccgo
error messages (incoming from dev.regabi), and to accomodate
types2 in dev.typeparams. They were resolved by accepting the
dev.regabi changes (so as not to lose them) and then by re-
applying whatever changes needed to make them pass with types2.
Finally, the new test mainsig.go was excluded from run.go when
using types2 due to issue #43308.
src/cmd/compile/internal/gc/noder.go
test/fixedbugs/bug13343.go
test/fixedbugs/bug462.go
test/fixedbugs/issue10975.go
test/fixedbugs/issue11326.go
test/fixedbugs/issue11361.go
test/fixedbugs/issue11371.go
test/fixedbugs/issue11674.go
test/fixedbugs/issue13365.go
test/fixedbugs/issue13471.go
test/fixedbugs/issue14136.go
test/fixedbugs/issue14321.go
test/fixedbugs/issue14729.go
test/fixedbugs/issue15898.go
test/fixedbugs/issue16439.go
test/fixedbugs/issue17588.go
test/fixedbugs/issue19323.go
test/fixedbugs/issue19482.go
test/fixedbugs/issue19880.go
test/fixedbugs/issue20185.go
test/fixedbugs/issue20227.go
test/fixedbugs/issue20415.go
test/fixedbugs/issue20749.go
test/fixedbugs/issue22794.go
test/fixedbugs/issue22822.go
test/fixedbugs/issue22921.go
test/fixedbugs/issue23823.go
test/fixedbugs/issue25727.go
test/fixedbugs/issue26616.go
test/fixedbugs/issue28079c.go
test/fixedbugs/issue28450.go
test/fixedbugs/issue30085.go
test/fixedbugs/issue30087.go
test/fixedbugs/issue35291.go
test/fixedbugs/issue38745.go
test/fixedbugs/issue41247.go
test/fixedbugs/issue41440.go
test/fixedbugs/issue41500.go
test/fixedbugs/issue4215.go
test/fixedbugs/issue6402.go
test/fixedbugs/issue6772.go
test/fixedbugs/issue7129.go
test/fixedbugs/issue7150.go
test/fixedbugs/issue7153.go
test/fixedbugs/issue7310.go
test/fixedbugs/issue8183.go
test/fixedbugs/issue8385.go
test/fixedbugs/issue8438.go
test/fixedbugs/issue8440.go
test/fixedbugs/issue8507.go
test/fixedbugs/issue9370.go
test/fixedbugs/issue9521.go
Change-Id: I26e6e326fde6e3fca5400711a253834d710ab7f4
Change the run.go driver to recognize the "gc" build tag.
Change existing tests to use the "gc" build tag if they use some
feature that seems specific to the gc compiler, such as passing specific
options to or expecting specific behavior from "go tool compile".
Change tests to use the "!gccgo" build tag if they use "go build" or
"go run", as while those might work with compilers other than gc, they
won't work with the way that gccgo runs its testsuite (which happens
independently of the go command).
For #43252
Change-Id: I666e04b6d7255a77dfc256ee304094e3a6bb15ad
Reviewed-on: https://go-review.googlesource.com/c/go/+/279052
Trust: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Also: Adjusted error patterns for passing test that have different
error messages.
Change-Id: I216294b4c4855aa93da22cdc3c0b3303e54a8420
Reviewed-on: https://go-review.googlesource.com/c/go/+/277994
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
If the parser reported an error for (string) literals, don't report
a second error during type checking.
This should have a couple of tests but they are tricky to arrange
with the current testing framework as the ERROR comment cannot be
on the line where the string. But the change is straightforward
and we have test/fixedbugs/issue32133.go that is passing now.
Change-Id: I0cd7f002b04e4092b8eb66009c7413288c8bfb23
Reviewed-on: https://go-review.googlesource.com/c/go/+/277993
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
The following files had merge conflicts and were merged manually:
src/cmd/compile/fmtmap_test.go
src/cmd/compile/internal/gc/noder.go
src/go/parser/error_test.go
test/assign.go
test/chan/perm.go
test/fixedbugs/issue22822.go
test/fixedbugs/issue4458.go
test/init.go
test/interface/explicit.go
test/map1.go
test/method2.go
The following files had manual changes to make tests pass:
test/run.go
test/used.go
src/cmd/compile/internal/types2/stdlib_test.go
Change-Id: Ia495aaaa80ce321ee4ec2a9105780fbe913dbd4c
Change-Id: I4f1d5d34dd9b26cea8e837a8ff7e833e02c913e1
Reviewed-on: https://go-review.googlesource.com/c/go/+/276815
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Use the Key position of a syntax.KeyValueExpr (not the position of the
":") when reporting an error for a missing key.
(In go/types, the KeyValueExpr position is the start of the expression
not the ":", so there this works as expected.)
Change-Id: I74147d245927847274cf4e53b4f03dbb5110c324
Reviewed-on: https://go-review.googlesource.com/c/go/+/276813
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Triaged and adjusted more test/fixedbugs/* tests.
Change-Id: I80b9ead2445bb8d126b7d79db4bea9ddcb225a84
Reviewed-on: https://go-review.googlesource.com/c/go/+/276812
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Also: Triaged/adjusted some more test/fixedbugs tests.
Change-Id: I050847b6dfccc7f301f8100bfdbe84e0487e33fc
Reviewed-on: https://go-review.googlesource.com/c/go/+/276512
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Enabled some more test/fixedbugs tests.
Change-Id: I02102b698eedfbee582b3234850fb01418ebbf7c
Reviewed-on: https://go-review.googlesource.com/c/go/+/276453
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
Also: Triaged/adjusted some more test/fixedbugs tests.
Change-Id: Idaba1875273d6da6ef82dd8de8edd8daa885d32c
Reviewed-on: https://go-review.googlesource.com/c/go/+/276472
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Use a map to detect recursive types.
With this we can now typecheck fixedbugs/issue8501.go.
Updates #43088.
Change-Id: I7fad6ccf6c94268473ff72b09a3158e13a7f4cc3
Reviewed-on: https://go-review.googlesource.com/c/go/+/276374
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Enabled fixedbugs/issue8183.go for run.go with new typechecker
now that issue is fixed.
Fixes#42992.
Updates #42991.
Change-Id: I23451999983b740d5f37ce3fa75ee756daf1a44f
Reviewed-on: https://go-review.googlesource.com/c/go/+/275517
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Change-Id: I103e3eeacd5b11efd63c965482a626878ba5ac81
Reviewed-on: https://go-review.googlesource.com/c/go/+/275216
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Replace existing ad-hoc file exclusion mechanism with list of
excluded files; i.e., files for which the compiler with -G
option doesn't produce matching error messages yet.
Remove -G option since we now always run all passing tests.
Change-Id: I0655d2cf8bc135b3f50b1a811b8f49090c427580
Reviewed-on: https://go-review.googlesource.com/c/go/+/275212
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
With this CL, the first ~500 errorcheck tests pass when running
go run run.go -v -G
in the $GOROOT/test directory (the log output includes a few dozen
tests that are currently skipped).
Change-Id: I9eaa2319fb39a090df54f8699ddc29ffe58b1bf1
Reviewed-on: https://go-review.googlesource.com/c/go/+/274975
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Now that filepath.WalkDir is available, it is more efficient
and should be used in place of filepath.Walk.
Update the tree to reflect best practices.
As usual, the code compiled with Go 1.4 during bootstrap is excluded.
(In this CL, that's only cmd/dist.)
For #42027.
Change-Id: Ib0f7b1e43e50b789052f9835a63ced701d8c411c
Reviewed-on: https://go-review.googlesource.com/c/go/+/267719
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
If the new Config.IgnoreBranches flag is set, the typechecker
ignores errors due to misplaced labels, break, continue,
fallthrough, or goto statements.
Since the syntax parser already checks these errors, we need
to disable a 2nd check by the typechecker to avoid duplicate
errors when running the compiler with the new typechecker.
Adjusted test/run.go to not ignore some of the tests that
used to fail because of duplicate errors.
Change-Id: I8756eb1d44f67afef5e57da289cd604b8e1716db
Reviewed-on: https://go-review.googlesource.com/c/go/+/274612
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Added a new flag -G to run. Setting -G (as in: go run run.go -G)
will run tests marked with "errorcheck" (and no other flags) also
with the compiler using the new typechecker.
Many tests don't pass yet (due to discrepancies in error messages).
The top-level tests in the test directory which don't pass yet have
been explicitly excluded, permitting to see the current status.
Future CLs will bring error messages in sync and eventually all
tests should pass.
Change-Id: I7caf5eff413e173f68d092af4bbe458434718d74
Reviewed-on: https://go-review.googlesource.com/c/go/+/274313
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Providing the -G flag instructs the compiler to accept type parameters.
For now, the compiler only parses such files and then exits.
Added a new test directory (test/typeparam) and initial test case.
Port from dev.go2go branch.
Change-Id: Ic11e33a9d5f012f8def0bdae205043659562ac73
Reviewed-on: https://go-review.googlesource.com/c/go/+/261660
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Backstop support for non-sse2 chips now that 387 is gone.
RELNOTE=yes
Change-Id: Ib10e69c4a3654c15a03568f93393437e1939e013
Reviewed-on: https://go-review.googlesource.com/c/go/+/260017
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
My last 387 CL. So sad ... ... ... ... not!
Fixes#40255
Change-Id: I8d4ddb744b234b8adc735db2f7c3c7b6d8bbdfa4
Reviewed-on: https://go-review.googlesource.com/c/go/+/258957
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The "runindir" tests used "go run", but relied on relative imports
(which are not supported by "go run" in module mode). Instead, such
tests must use fully-qualified imports, which require either a go.mod
file (in module mode) or that the package be in an appropriate
subdirectory of GOPATH/src (in GOPATH mode).
To set up such a directory, we use yet another copy of the same
overlayDir function currently found in the misc subdirectory of this
repository.
Fixes#33912
Updates #30228
Change-Id: If3d7ea2f7942ba496d98aaaf24a90bcdcf4df9f7
Reviewed-on: https://go-review.googlesource.com/c/go/+/225205
Reviewed-by: Ian Lance Taylor <iant@golang.org>
//line bogo.go:9999999 will cause 'go tool objdump' to crash
unless bogo.go has that many lines. Guard the array index
and return innocuous values (nil, nil) from the file cache.
Fixes#36683
Change-Id: I4a9f8444dc611654d270cc876e8848dfd2f84770
Reviewed-on: https://go-review.googlesource.com/c/go/+/223081
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
With a clean cache on a laptop
before change
time go run run.go -- . fixedbugs
real 2m10.195s
user 3m16.547s
sys 1m52.939s
Or, before, directly after make.bash (the actual use case we care about)
time go run run.go -- . fixedbugs
real 2m8.704s
user 3m12.327s
sys 1m49.123s
after change
time go run run.go -- . fixedbugs
real 1m38.915s
user 2m38.389s
sys 1m8.490s
Tests, fortunately, still seem to pass.
Latest version of this takes the slow route for cross-compilation, which includes wasm.
Change-Id: Iad19951612defa96c4e9830bce920c5e8733834a
Reviewed-on: https://go-review.googlesource.com/c/go/+/223083
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The default is for later flags to override earlier ones,
so if the asmcheck set flags, it lost the important -S=2.
Change-Id: Id538254908d658da2acb55157ac4f6fa44f6a467
Reviewed-on: https://go-review.googlesource.com/c/go/+/222820
Reviewed-by: Keith Randall <khr@golang.org>
-gcflags=-flag means apply the flags only to the package named
on the command line (the main package, for these tests).
-gcflags=all=-flag means apply the flags to everything in the build,
including the standard library.
cmd/dist uses -gcflags=all=$GO_GCFLAGS, so test/run should do the same,
as the comment already explains, to avoid rebuilding the entire standard
library without the flags during test/run's builds.
We changed the scope of the flags without a pattern a few releases
ago and missed this one.
Change-Id: I039e60ca619d39e5b502261d4a73e1afc7e3f9fc
Reviewed-on: https://go-review.googlesource.com/c/go/+/213827
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
• Inline check function because it's more readable.
• Delete toolPath because it was unused.
• Use strings.TrimPrefix because it's simpler.
• Remove out variable because its value was unused.
• Rename serr to err because it's more consistent.
Change-Id: I084fb4f8b399578834d5eea29a673c386cf3a357
Reviewed-on: https://go-review.googlesource.com/c/go/+/218701
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Hajime Hoshi <hajimehoshi@gmail.com>
Brad's battery died on a plane and the file stayed open for 8 years
without anyone noticing. 😄
Someone noticed in https://github.com/gopherjs/gopherjs/pull/950.
Updates #2833
Change-Id: I46b28ac014a8c355be94e026615f119f96e5d51a
Reviewed-on: https://go-review.googlesource.com/c/go/+/218700
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Currently, some tests under test/fixedbugs never run:
$ for d in test/fixedbugs/*.dir; do
! test -f "${d%.dir}.go" && echo "$d"
done
test/fixedbugs/issue15071.dir
test/fixedbugs/issue15609.dir
test/fixedbugs/issue29612.dir
Because they missed the corresponding ".go" file, so "go run run.go"
will skip them.
Add missing ".go" files for those tests to make sure they will be
collected and run.
While at it, add another action "runindir", which does "go run ."
inside the t.goDirName then check the output.
Change-Id: I88000b3663a6a615d90c1cf11844ea0377403e3d
Reviewed-on: https://go-review.googlesource.com/c/go/+/177798
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The test/codegen tests check all architectures
mentioned in the test file, but this requires
building at least the runtime for that architecture.
This CL changes the test to only check the local
architecture, leaving checking of other architectures
to the relevant builders, as usual.
This cuts 'go run run.go codegen' by 12r 78u 21s.
After this change, all.bash runs in ~4:40 on my laptop.
For #26473.
Change-Id: Ia0354d1aff2df2949f838528c8171410bc42dc8b
Reviewed-on: https://go-review.googlesource.com/c/go/+/177577
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
A check in inl.go to prevent inlining of functions calling
either getcallerpc or getcallersp does not work when these
functions are intrinsics. Swap checks to fix.
Includes test.
No bug, this was discovered in the course of a ridiculous
experiment with inlining.
Change-Id: Ie1392523bb89882d586678f2674e1a4eadc5e431
Reviewed-on: https://go-review.googlesource.com/c/go/+/172217
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
These new calls should not prevent NOSPLIT promotion, like the old ones.
These new calls should not prevent racefuncenter/exit removal.
(The latter was already true, as the new calls are not yet lowered
to StaticCalls at the point where racefuncenter/exit removal is done.)
Add tests to make sure we don't regress (again).
Fixes#31219
Change-Id: I3fb6b17cdd32c425829f1e2498defa813a5a9ace
Reviewed-on: https://go-review.googlesource.com/c/go/+/170639
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
For "rundir" tests, allow users to add in linker flags as well as
compiler flags, e.g.
// rundir -m -ldflags -w
The directive above will pass "-m" to the compiler on each package compilation
and "-w" to the linker for the final link.
In addition, if "-P" is specified with 'rundir', then for each compile
pass in "-p <X>" to set the packagepath explicitly, which is closer to
how the compiler is run by 'go build'.
Change-Id: I04720011a89d1bd8dcb4f2ccb4af1d74f6a01da1
Reviewed-on: https://go-review.googlesource.com/c/go/+/168977
Reviewed-by: Cherry Zhang <cherryyz@google.com>
ppc64{,le} processor level selection allows the compiler to generate instructions
targeting newer processors and processor-specific optimizations without breaking
compatibility with our current baseline. This feature introduces a new environment
variable, GOPPC64.
GOPPC64 is a GOARCH=ppc64{,le} specific option, for a choice between different
processor levels (i.e. Instruction Set Architecture versions) for which the
compiler will target. The default is 'power8'.
Change-Id: Ic152e283ae1c47084ece4346fa002a3eabb3bb9e
Reviewed-on: https://go-review.googlesource.com/c/go/+/163758
Run-TryBot: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
When functions are inlined, for instructions in the inlined body, does
-S print the location of the call, or the location of the body? Right
now, we do the former. I'd like to do the latter by default, it makes
much more sense when reading disassembly. With mid-stack inlining
enabled in more cases, this quandry will come up more often.
The original behavior is still available with -S=2. Some tests
use this mode (so they can find assembly generated by a particular
source line).
This helped me with understanding what the compiler was doing
while fixing #29007.
Change-Id: Id14a3a41e1b18901e7c5e460aa4caf6d940ed064
Reviewed-on: https://go-review.googlesource.com/c/153241
Reviewed-by: David Chase <drchase@google.com>
IsSliceInBounds(x, y) asserts that y is not negative, but
there were cases where this is not true. Change code
generation to ensure that this is true when it's not obviously
true. Prove phase cleans a few of these out.
With this change the compiler text section is 0.06% larger,
that is, not very much. Benchmarking still TBD, may need
to wait for access to a benchmarking box (next week).
Also corrected run.go to handle '?' in -update_errors output.
Fixes#28797.
Change-Id: Ia8af90bc50a91ae6e934ef973def8d3f398fac7b
Reviewed-on: https://go-review.googlesource.com/c/152477
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
A little bit of compiler stress testing. Randomize the order
of the values in a block before every phase. This randomization
makes sure that we're not implicitly depending on that order.
Currently the random seed is a hash of the function name.
It provides determinism, but sacrifices some coverage.
Other arrangements are possible (env var, ...) but require
more setup.
Fixes#20178
Change-Id: Idae792a23264bd9a3507db6ba49b6d591a608e83
Reviewed-on: https://go-review.googlesource.com/c/33909
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Currently, both asm and compile have a -symabis flag, but in asm it's
a boolean flag that means to generate a symbol ABIs file and in the
compiler its a string flag giving the path of the symbol ABIs file to
consume. I'm worried about this false symmetry biting us in the
future, so rename asm's flag to -gensymabis.
Updates #27539.
Change-Id: I8b9c18a852d2838099718f8989813f19d82e7434
Reviewed-on: https://go-review.googlesource.com/c/149818
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Move the empty header file created by "builddir", "buildrundir"
directives to t.tempDir. The file was accidentally placed in the
same directory as the source code and this was a vestige of CL 146999.
Fixes#28781
Change-Id: I3d2ada5f9e8bf4ce4f015b9bd379b311592fe3ce
Reviewed-on: https://go-review.googlesource.com/c/149458
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This is a little clearer, and we're about to need the .s file list in
one more place, so this will cut down on duplication.
Change-Id: I4da8bf03a0469fb97565b0841c40d505657b574e
Reviewed-on: https://go-review.googlesource.com/c/146998
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This appears to have simply been an oversight.
Change-Id: Ia5d1309b3ebc99c9abbf0282397693272d8178aa
Reviewed-on: https://go-review.googlesource.com/c/142885
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Also includes a small tweak to test/run.go to allow package names
with Unicode letters (as opposed to just ASCII chars).
Updates #27836
Change-Id: Idbf0bdea24174808cddcb69974dab820eb13e521
Reviewed-on: https://go-review.googlesource.com/138075
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Adds a new build tag "gcflags_noopt" that can be used in test/*.go
tests.
Fixes#27833
Change-Id: I4ea0ccd9e9e58c4639de18645fec81eb24a3a929
Reviewed-on: https://go-review.googlesource.com/136898
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The codegen testsuite uses regexp to parse the syntax, but it doesn't
have a way to tell line comments containing checks from line comments
containing English sentences. This means that any syntax error (that
is, non-matching regexp) is currently ignored and not reported.
There were some tests in memcombine.go that had an extraneous space
and were thus effectively disabled. It would be great if we could
report it as a syntax error, but for now we just punt and swallow the
spaces as a workaround, to avoid the same mistake again.
Fixes#25452
Change-Id: Ic7747a2278bc00adffd0c199ce40937acbbc9cf0
Reviewed-on: https://go-review.googlesource.com/113835
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Every action has a short annotation.
The errorCheck function has a comment adapted from errchk script.
Removed redundant assigments to tmpDir.
Change-Id: Ifdd1284de046a0ce2aad26bd8da8a8e6a7707a8e
Reviewed-on: https://go-review.googlesource.com/115856
Run-TryBot: Yury Smolsky <yury@smolsky.by>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL removes the rundircmpout action completely
because it is not used anywhere.
The run case already looks for output files. Rename the cmpout action
mentioned in tests to the run action and remove "cmpout" from run.go.
Change-Id: I835ceb70082927f8e9360e0ea0ba74f296363ab3
Reviewed-on: https://go-review.googlesource.com/115575
Run-TryBot: Yury Smolsky <yury@smolsky.by>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
To allow testing of fixedbugs/bug345.go in Go,
a new flag -n is introduced. This flag disables setting
of relative path for local imports and imports search path
to current dir, namely -D . -I . are not passed to the compiler.
Error regexps are fixed to allow running the test in temp directory.
This change eliminates the last place where Perl
script "errchk" was used.
Fixes#25586.
Change-Id: If085f466e6955312d77315f96d3ef1cb68495aef
Reviewed-on: https://go-review.googlesource.com/115277
Run-TryBot: Yury Smolsky <yury@smolsky.by>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change enables bug248 to be tested with Go code.
For that, it adds a flag -1 to error check and run directory
with one package failing compilation prior the last package
which should be run.
Specifically, the "p" package in bug1.go file was renamed into "q"
to compile them in separate steps,
bug2.go and bug3.go files were reordered,
bug2.go was changed into non-main package.
Updates #25586.
Change-Id: Ie47aacd56ebb2ce4eac66c792d1a53e1e30e637c
Reviewed-on: https://go-review.googlesource.com/114818
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
mips64 softfloat support is based on mips implementation and introduces
new enviroment variable GOMIPS64.
GOMIPS64 is a GOARCH=mips64{,le} specific option, for a choice between
hard-float and soft-float. Valid values are 'hardfloat' (default) and
'softfloat'. It is passed to the assembler as
'GOMIPS64_{hardfloat,softfloat}'.
Change-Id: I7f73078627f7cb37c588a38fb5c997fe09c56134
Reviewed-on: https://go-review.googlesource.com/108475
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
On amd64, Ctz must include special handling of zeros.
But the prove pass has enough information to detect whether the input
is non-zero, allowing a more efficient lowering.
Introduce new CtzNonZero ops to capture and use this information.
Benchmark code:
func BenchmarkVisitBits(b *testing.B) {
b.Run("8", func(b *testing.B) {
for i := 0; i < b.N; i++ {
x := uint8(0xff)
for x != 0 {
sink = bits.TrailingZeros8(x)
x &= x - 1
}
}
})
// and similarly so for 16, 32, 64
}
name old time/op new time/op delta
VisitBits/8-8 7.27ns ± 4% 5.58ns ± 4% -23.35% (p=0.000 n=28+26)
VisitBits/16-8 14.7ns ± 7% 10.5ns ± 4% -28.43% (p=0.000 n=30+28)
VisitBits/32-8 27.6ns ± 8% 19.3ns ± 3% -30.14% (p=0.000 n=30+26)
VisitBits/64-8 44.0ns ±11% 38.0ns ± 5% -13.48% (p=0.000 n=30+30)
Fixes#25077
Change-Id: Ie6e5bd86baf39ee8a4ca7cadcf56d934e047f957
Reviewed-on: https://go-review.googlesource.com/109358
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
While writing CL 107315, I went back and forth for the syntax used for
constraints of build environments in which the architecture did not
support varitants ("plan9/amd64" vs "plan9/amd64/"). I eventually
settled for the latter because the code required less heuristics
(think parsing "plan9/386" vs "386/sse2") but there were a few
leftovers in code and comments.
Change-Id: I9d9a008f3814f9a1642609650eb571e7f1a675cf
Reviewed-on: https://go-review.googlesource.com/107338
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL makes the codegen testsuite automatically test all
architecture variants for architecture specified in tests. For
instance, if a test file specifies a "arm" test, it will be
automatically run on all GOARM variants (5,6,7), to increase
the coverage.
The CL also introduces a syntax to specify only a specific
variant (eg: "arm/7") in case the test makes sense only there.
The same syntax also allows to specify the operating system
in case it matters (eg: "plan9/386/sse2").
Fixes#24658
Change-Id: I2eba8b918f51bb6a77a8431a309f8b71af07ea22
Reviewed-on: https://go-review.googlesource.com/107315
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This change modifies the codegen test harness driver so that it no
longer modifies the environment GOOS/GOARCH, since that seems to cause
flakiness in other concurrently-running tests.
The change also enables the codegen tests in run.go.
Fixes#24538
Change-Id: I997ac1eb38eb92054efff67fe5c4d3cccc86412b
Reviewed-on: https://go-review.googlesource.com/103455
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Before this change, in case of any failure, asmcheck was
dumping to stderr the whole output of compile -S, which
can be very long if it contains multiple functions.
Make it so it filters the output to only display the
assembly output of functions for which at least one opcode
check failed. This greatly simplifies debugging.
Change-Id: I1bbf54473b8252a3384e2c1dade82d926afc119d
Reviewed-on: https://go-review.googlesource.com/98444
Run-TryBot: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Keith Randall <khr@golang.org>
Currently, the top-level testsuite always uses whatever version
of Go is found in the PATH to execute all the tests. This
forces the developers to tweak the PATH to run the testsuite.
Change it to use the same version of Go used to run run.go.
This allows developers to run the testsuite using the tip
compiler by simply saying "../bin/go run run.go".
I think this is a better solution compared to always forcing
"../bin/go", because it allows developers to run the testsuite
using different Go versions, for instance to check if a new
test is fixed in tip compared to the installed compiler.
Fixes#24217
Change-Id: I41b299c753b6e77c41e28be9091b2b630efea9d2
Reviewed-on: https://go-review.googlesource.com/98439
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
In RET instruction, the operand is the return jump's target,
which should be put in Prog.To.
Add an action "buildrundir" to the test driver, which builds
(compile+assemble+link) the code in a directory and runs the
resulting binary.
Fixes#23838.
Change-Id: I7ebe7eda49024b40a69a24857322c5ca9c67babb
Reviewed-on: https://go-review.googlesource.com/94175
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This avoid simple bugs like "ADD" matching "FADD". Obviously
"ADD" will still match "ADDQ" so some care is still required
in this regard, but at least a first class of possible errors
is taken care of.
Change-Id: I7deb04c31de30bedac9c026d9889ace4a1d2adcb
Reviewed-on: https://go-review.googlesource.com/97817
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Keith Randall <khr@golang.org>
asmcheck comments now support a compact form of specifying
multiple checks for each platform, using the following syntax:
amd64:"SHL\t[$]4","SHR\t[$]4"
Negative checks are also parsed using the following syntax:
amd64:-"ROR"
though they are still not working.
Moreover, out-of-line comments have been implemented. This
allows to specify asmchecks on comment-only lines, that will
be matched on the first subsequent non-comment non-empty line.
// amd64:"XOR"
// arm:"EOR"
x ^= 1
Change-Id: I110c7462fc6a5c70fd4af0d42f516016ae7f2760
Reviewed-on: https://go-review.googlesource.com/97816
Reviewed-by: Keith Randall <khr@golang.org>
The top-level test harness is modified to support a new kind
of test: "asmcheck". This is meant to replace asm_test.go
as an easier and more readable way to test code generation.
I've added a couple of codegen tests to get initial feedback
on the syntax. I've created them under a common "codegen"
subdirectory, so that it's easier to run them all with
"go run run.go -v codegen".
The asmcheck syntax allows to insert line comments that
can specify a regular expression to match in the assembly code,
for multiple architectures (the testsuite will automatically
build each testfile multiple times, one per mentioned architecture).
Negative matches are unsupported for now, so this cannot fully
replace asm_test yet.
Change-Id: Ifdbba389f01d55e63e73c99e5f5449e642101d55
Reviewed-on: https://go-review.googlesource.com/97355
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
For "type T = U" we were accidentally emitting a #define for "U__size"
instead of "T__size".
Fixes#22877.
Change-Id: I5ed6757d697753ed6d944077c16150759f6e1285
Reviewed-on: https://go-review.googlesource.com/80759
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This cuts 6 seconds off all.bash with the new go command.
Not a ton, but also an easy 6 seconds to grab.
The -tags=use_go_run in the misc/cgo tests is just some
go command flag that will make run.go use go run,
but without making everything look stale.
(Those tests have relative imports,
so go tool compile+link is not enough.)
Change-Id: I43bf4bb661d3adde2b2d4aad5e8f64b97bc69ba9
Reviewed-on: https://go-review.googlesource.com/73994
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If the go install doesn't use the same flags as the main build
it can overwrite the installed standard library, leading to
flakiness and slow future tests.
Force uses of 'go install' etc to propagate $GO_GCFLAGS
or disable them entirely, to avoid problems.
As I understand it, the main place this happens is the ssacheck builder.
If there are other uses that need to run some of the now-disabled
tests we can reenable fixed tests in followup CLs.
Change-Id: Ib860a253539f402f8a96a3c00ec34f0bbf137c9a
Reviewed-on: https://go-review.googlesource.com/74470
Reviewed-by: David Crawshaw <crawshaw@golang.org>
These are used by DIV[U] and MOD[U] assembly instructions.
Add a test in the stdlib so we actually exercise linking
to these routines.
Update #19507
Change-Id: I0d8e19a53e3744abc0c661ea95486f94ec67585e
Reviewed-on: https://go-review.googlesource.com/45703
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The code in #20162 contains an embedded interface.
It didn't get dowidth'd by the frontend,
and during DWARF generation, ngotype asked
for a string description of it,
which triggered a request for the number of fields
in the interface, which triggered a dowidth,
which is disallowed in the backend.
The other changes in this CL are to support the test.
Fixes#20162
Change-Id: I4d0be5bd949c361d4cdc89a8ed28b10977e40cf9
Reviewed-on: https://go-review.googlesource.com/42131
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Previously, we could not run tests with -l=4 on NaCl since the buildrun
action is not supported on NaCl. This lets us run tests with build flags
on NaCl.
Change-Id: I103370c7b823b4ff46f47df97e802da0dc2bc7c3
Reviewed-on: https://go-review.googlesource.com/38170
Run-TryBot: David Lazar <lazard@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Compiler errors now show the exact line and line byte offset (sometimes
called "column") of where an error occured. For `go tool compile x.go`:
package p
const c int = false
//line foo.go:123
type t intg
reports
x.go:2:7: cannot convert false to type int
foo.go:123[x.go:4:8]: undefined: intg
(Some errors use the "wrong" position for the error message; arguably
the byte offset for the first error should be 15, the position of 'false',
rathen than 7, the position of 'c'. But that is an indepedent issue.)
The byte offset (column) values are measured in bytes; they start at 1,
matching the convention used by editors and IDEs.
Positions modified by //line directives show the line offset only for the
actual source location (in square brackets), not for the "virtual" file and
line number because that code is likely generated and the //line directive
only provides line information.
Because the new format might break existing tools or scripts, printing
of line offsets can be disabled with the new compiler flag -C. We plan
to remove this flag eventually.
Fixes#10324.
Change-Id: I493f5ee6e78457cf7b00025aba6b6e28e50bb740
Reviewed-on: https://go-review.googlesource.com/37970
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Loop breaking with a counter. Benchmarked (see comments),
eyeball checked for sanity on popular loops. This code
ought to handle loops in general, and properly inserts phi
functions in cases where the earlier version might not have.
Includes test, plus modifications to test/run.go to deal with
timeout and killing looping test. Tests broken by the addition
of extra code (branch frequency and live vars) for added
checks turn the check insertion off.
If GOEXPERIMENT=preemptibleloops, the compiler inserts reschedule
checks on every backedge of every reducible loop. Alternately,
specifying GO_GCFLAGS=-d=ssa/insert_resched_checks/on will
enable it for a single compilation, but because the core Go
libraries contain some loops that may run long, this is less
likely to have the desired effect.
This is intended as a tool to help in the study and diagnosis
of GC and other latency problems, now that goal STW GC latency
is on the order of 100 microseconds or less.
Updates #17831.
Updates #10958.
Change-Id: I6206c163a5b0248e3f21eb4fc65f73a179e1f639
Reviewed-on: https://go-review.googlesource.com/33910
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
It appears to be a vestigial holding ground for bugs.
But we have an issue tracker, and #1909 is there and open.
Change-Id: I912ff222a24c51fab483be0c67dad534f5a84488
Reviewed-on: https://go-review.googlesource.com/31859
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
If -s is specified, each file is considered a separate
package even if multiple files have the same package names.
For instance, the action and flag "errorcheckdir -s"
will compile all files in the respective directory as
individual packages.
Change-Id: Ic5c2f9e915a669433f66c2d3fe0ac068227a502f
Reviewed-on: https://go-review.googlesource.com/24313
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Pushed from an old client by mistake. These are the
missing changes.
Change-Id: Ia8d61c5c0bde907369366ea9ea98711823342803
Reviewed-on: https://go-review.googlesource.com/21349
Reviewed-by: Todd Neal <todd@tneal.org>
One intrinsic was needed to help get the very best
performance out of a future GC; as long as that one was
being added, I also added Bswap since that is sometimes
a handy thing to have. I had intended to fill out the
bit-scan intrinsic family, but the mismatch between the
"scan forward" instruction and "count leading zeroes"
was large enough to cause me to leave it out -- it poses
a dilemma that I'd rather dodge right now.
These intrinsics are not exposed for general use.
That's a separate issue requiring an API proposal change
( https://github.com/golang/proposal )
All intrinsics are tested, both that they are substituted
on the appropriate architecture, and that they produce the
expected result.
Change-Id: I5848037cfd97de4f75bdc33bdd89bba00af4a8ee
Reviewed-on: https://go-review.googlesource.com/20564
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This should probably be considered "experimental" at this stage, but
what it needs is feedback from adventurous adopters. I think the data
structure used for describing escape reasons might be extendable to
allow a cleanup of the underlying algorithms, which suffers from
insufficiently separated concerns (the graph does not deal well with
escape level adjustments, so it is augmented by a second custom-walk
portion of the "flood" phase. It would be better to put it all,
including level adjustments, in a single graph structure, and then
simply flood the graph.
Tweaked to avoid allocations in the no-logging case.
Modified run.go to ignore lines with leading "#" in the output (since
it can never match a line), and in -update_errors to ignore leading
tabs in output lines and to normalize embedded filenames.
Currently requires -m -m because otherwise the noise/update
burden for the other escape tests is considerable.
There is a partial test. Existing escape analysis tests seem to
cover all except the panic case and what looks like it might be
unreachable code in escape analysis.
Fixes#10526.
Change-Id: I2524fdec54facae48b00b2548e25d9e46fcaf832
Reviewed-on: https://go-review.googlesource.com/18041
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The build tags are necessary to keep "go build" in that directory
building only stdio.go, but we have to arrange for test/run.go to
treat them as satisfied.
Fixes#12625.
Change-Id: Iec0cb2fdc2c9b24a4e0530be25e940aa0cc9552e
Reviewed-on: https://go-review.googlesource.com/17454
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is a bit ugly but it's a useful test. Run go install -buildmode=shared std
and then go run run.go -linkshared (it passes on linux/amd64).
Change-Id: I5684c79cd03817fa1fc399788b7320f8535c08da
Reviewed-on: https://go-review.googlesource.com/16343
Reviewed-by: Russ Cox <rsc@golang.org>
Some tests disabled, some bifurcated into _ssa and not,
with appropriate logging added to compiler.
"tests/live.go" in particular needs attention.
SSA-specific testing removed, since it's all SSA now.
Added "-run_skips" option to tests/run.go to simplify
checking whether a test still fails (or how it fails)
on a skipped platform.
The compiler now compiles with SSA by default.
If you don't want SSA, specify GOSSAHASH=n (or N) as
an environment variable. Function names ending in "_ssa"
are always SSA-compiled.
GOSSAFUNC=fname retains its "SSA for fname, log to ssa.html"
GOSSAPKG=pkg only has an effect when GOSSAHASH=n
GOSSAHASH=10101 etc retains its name-hash-matching behavior
for purposes of debugging.
See #13068
Change-Id: I8217bfeb34173533eaeb391b5f6935483c7d6b43
Reviewed-on: https://go-review.googlesource.com/16299
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com>
Add line that was inadvertently removed.
Change-Id: I99ebc1041e984e408ae5825836c28b9891d6043b
Reviewed-on: https://go-review.googlesource.com/14470
Run-TryBot: Todd Neal <todd@tneal.org>
Reviewed-by: Keith Randall <khr@golang.org>
This matches existing behavior, see issue #2196
Change-Id: Ifa9359b7c821115389f337a57de355c5ec23be8f
Reviewed-on: https://go-review.googlesource.com/14261
Reviewed-by: Keith Randall <khr@golang.org>
Evaluating args can overwrite arg area, so we can't write argsize and func
until args are evaluated.
Fixes test/recover.go, test/recover1.go, and test/fixedbugs/issue4066.go
Change-Id: I862e4934ccdb8661431bcc3e1e93817ea834ea3f
Reviewed-on: https://go-review.googlesource.com/14405
Reviewed-by: David Chase <drchase@google.com>
Now that the standard library tests
are all passing, add the
test directory tests.
These contain a number of edge case tests
that are of particular interest for compilers.
Some kinds of tests are not well-suited
for a new backend, such as errorcheck tests.
To start, use SSA only for run and runoutput.
There are three failing tests now.
Just mark them as such for now,
so that we can prevent regressions.
This code will all be unwound once SSA
codegen matures and becomes the default.
Change-Id: Ic51e6d0cc1cd48ef1e2fe2c9a743bf0cce275200
Reviewed-on: https://go-review.googlesource.com/14344
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Also modified test/run.go to ignore messages prefixed <autogenerated>
because those cannot be described with "// ERROR ...", and backed out
patch from issue #9537 because it is no longer necessary. The reasons
described in the 9537 discussion for why escape analysis cannot run
late no longer hold, happily.
Fixes#11053.
Change-Id: Icb14eccdf2e8cde3d0f8fb8a216b765400a96385
Reviewed-on: https://go-review.googlesource.com/11088
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Chase <drchase@google.com>
Also modifies 'dist test' to use that sharding, and removes some old
temporary stuff from dist test which are no longer required.
'dist test' now also supports running a list of tests given in
arguments, mutually exclusive with the existing -run=REGEXP flag. The
hacky fast paths for avoiding the 1 second "go list" latency are now
removed and only apply to the case where partial tests are run via
args, instead of regex. The build coordinator will use both styles
for awhile. (the statically-sharded ARM builders on scaleway will
continue to use regexps, but the dynamically-shared builders on GCE
will use the list of tests)
Updates #10029
Change-Id: I557800a54dfa6f3b5100ef4c26fe397ba5189813
Reviewed-on: https://go-review.googlesource.com/10688
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL removes the remaining visible uses of the "architecture letter" concept.
(They are no longer in tool names nor in source directory names.)
Because the architecture letter concept is now gone, delete GOCHAR
from "go env" output, and change go/build.ArchChar to return an
error always.
The architecture letter is still used in the compiler and linker sources
as a clumsy architecture enumeration, but that use is not visible to
Go users and can be cleaned up separately.
Change-Id: I4d97a38f372003fb610c9c5241bea440d9dbeb8d
Reviewed-on: https://go-review.googlesource.com/10289
Reviewed-by: Rob Pike <r@golang.org>
This CL fixes the build to use the newly created go tool compile
and go tool link in place of go tool 5g, go tool 5l, and so on.
See golang-dev thread titled "go tool compile, etc" for background.
Although it was not a primary motivation, this conversion does
reduce the wall clock time and cpu time required for make.bash
by about 10%.
Change-Id: I79cbbdb676cab029db8aeefb99a53178ff55f98d
Reviewed-on: https://go-review.googlesource.com/10288
Reviewed-by: Rob Pike <r@golang.org>
Clean up after CL 5310.
Change-Id: Ib870e7b9d26eb118eefdaa3e76dcec4a4d459584
Reviewed-on: https://go-review.googlesource.com/9398
Reviewed-by: Ian Lance Taylor <iant@golang.org>
These were fixed a little while ago, but overlooked when reenabling
disabled tests.
Update #9968.
Change-Id: I301ef587e580c517a170ad08ff897118b58cedec
Reviewed-on: https://go-review.googlesource.com/9347
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
The flag updates error annotations in test files from actual compiler output.
This is useful when doing compiler changes that add/remove/change lots of errors,
or when adding lots of new tests.
Also I noticed at least 2 cases where annotation were sub-optimal:
1. The annotation was "leaking param p" when the actual error is
"leaking param p to result ~r1".
2. The annotation was "leaking param m" when the actual errors
are "leaking param m" and "leaking param mv1".
For now it works only for errorcheck mode.
Also, apply the update to escape and liveness tests.
Some files have gccgo-specific errors of the form "gc error|gccgo error",
so it is risky to run update on all files. Gccgo-specific error
does not necessary contain '|', it can be just truncated.
Change-Id: Iaaae767f859dcb8321a8cb4970b2b70969e8a345
Reviewed-on: https://go-review.googlesource.com/5310
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
These don't work with the new compiler, because the
new compiler doesn't have the custom syntax errors
that I built for the old compiler. It will, just not yet.
(Issue #9968.)
Change-Id: I658f7dab2c7f855340a501f9ae4479c097b28cd3
Reviewed-on: https://go-review.googlesource.com/5632
Reviewed-by: Rob Pike <r@golang.org>
The main issue is that the misc/cgo/{stdio,life} tests are silently
getting skipped when invoked from run.bash.
run.go should ignore any build tags after the first blank line in
source file. It already checks for test actions only upto the first
blank line. Build tags must be specified in the same block.
See http://golang.org/cl/3675 for background.
Change-Id: Id8abf000119e3335f7250d8ef34aac7811fc9dff
Reviewed-on: https://go-review.googlesource.com/3812
Reviewed-by: Minux Ma <minux@golang.org>
* bug248, bug345, bug369, and bug429 were ported from bash commands to run scripts. bug369 remains disabled.
* bug395 is a test for issue 1909, which is still open. It is marked as skip now and will be usable with compile with run.go when issue 1909 is fixed.
Fixes#4139
Updates #1909
Change-Id: Ibb5fbfb5cf72ddc285829245318eeacd3fb5a636
Reviewed-on: https://go-review.googlesource.com/1774
Reviewed-by: Russ Cox <rsc@golang.org>
The remaining run-only tests will be migrated to run.go in another CL.
This CL will break the build due to issues 8746 and 8806.
Update #4139
Update #8746
Update #8806
LGTM=rsc
R=rsc, bradfitz, iant
CC=golang-codereviews
https://golang.org/cl/144630044
Following CL 68150047, the goos and goarch
variables are not currently set when the GOOS
and GOARCH environment variables are not set.
This made the content of the build tag to be
ignored in this case.
This CL sets goos and goarch to runtime.GOOS
and runtime.GOARCH when the GOOS and GOARCH
environments variables are not set.
LGTM=aram, bradfitz
R=golang-codereviews, aram, gobot, rsc, dave, bradfitz
CC=golang-codereviews, rsc
https://golang.org/cl/112490043
This matters for NaCl, which seems to swamp my 4-core MacBook Pro otherwise.
It's not a correctness problem, just a usability problem.
LGTM=bradfitz
R=bradfitz
CC=golang-codereviews
https://golang.org/cl/98600046
Some of the errorcheck tests have many many identical regexps.
Use a map to avoid storing the compiled form many many times
in memory. Change the filterRe to a simple string to avoid
the expense of those regexps as well.
Cuts the time for run.go on index2.go by almost 50x.
Noticed during debugging of issue 7344.
LGTM=bradfitz
R=bradfitz, josharian
CC=golang-codereviews
https://golang.org/cl/74380043
See golang.org/s/go13nacl for design overview.
This CL is the mostly mechanical changes from rsc's Go 1.2 based NaCl branch, specifically 39cb35750369 to 500771b477cf from https://code.google.com/r/rsc-go13nacl. This CL does not include working NaCl support, there are probably two or three more large merges to come.
CL 15750044 is not included as it involves more invasive changes to the linker which will need to be merged separately.
The exact change lists included are
15050047: syscall: support for Native Client
15360044: syscall: unzip implementation for Native Client
15370044: syscall: Native Client SRPC implementation
15400047: cmd/dist, cmd/go, go/build, test: support for Native Client
15410048: runtime: support for Native Client
15410049: syscall: file descriptor table for Native Client
15410050: syscall: in-memory file system for Native Client
15440048: all: update +build lines for Native Client port
15540045: cmd/6g, cmd/8g, cmd/gc: support for Native Client
15570045: os: support for Native Client
15680044: crypto/..., hash/crc32, reflect, sync/atomic: support for amd64p32
15690044: net: support for Native Client
15690048: runtime: support for fake time like on Go Playground
15690051: build: disable various tests on Native Client
LGTM=rsc
R=rsc
CC=golang-codereviews
https://golang.org/cl/68150047
Update #6853
For an ephemeral binary - one created, run, and then deleted -
there is no need to write dwarf debug information, since the
binary will not be used with gdb. In this case, instruct the linker
not to spend time and disk space generating the debug information
by passing the -w flag to the linker.
Omitting dwarf information reduces the size of most binaries by 25%.
We may be more aggressive about this in the future.
LGTM=bradfitz, r
R=r, bradfitz
CC=golang-codereviews
https://golang.org/cl/65890043
The commands being run are 'go tool this' and 'go tool that',
and the go command will call Getwd during its init.
R=golang-dev, iant
CC=golang-dev
https://golang.org/cl/7336045
Expressions involving nil, even if they can be evaluated
at compile time, do not count as Go constants and cannot
be used in const initializers.
Fixes#4673.
Fixes#4680.
R=ken2
CC=golang-dev
https://golang.org/cl/7278043
runoutput styles tests generally consume a lot of memory. On arm platforms rotate?.go consume around 200mb each to compile, and as tests are sorted alphabetically, they all tend to run at once.
This change limits the number of runoutput jobs to 2 on arm platforms.
R=minux.ma, remyoudompheng, bradfitz, lucio.dere
CC=golang-dev
https://golang.org/cl/7099047
The patch makes the compile user an ordinary package-local
symbol for the name of embedded fields of builtin type.
This is incompatible with the fix delivered for issue 2687
(revision 3c060add43fb) but fixes it in a different way, because
the explicit symbol on the field makes the typechecker able to
find it in lookdot.
Fixes#3552.
R=lvd, rsc, daniel.morsing
CC=golang-dev
https://golang.org/cl/6866047
Running this test via "bash run" uncovered three different
bugs (4344, 4348, 4353). We need to run it by default.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/6832043
The other tests either need a complex procedure
or are architecture- or OS-dependent.
Update #4139.
R=golang-dev, daniel.morsing, iant
CC=golang-dev
https://golang.org/cl/6618062
testlib will complain about any unmatched errors left in errorchecks while run.go will not.
Fixes#4141.
R=golang-dev, minux.ma, remyoudompheng, rsc
CC=golang-dev
https://golang.org/cl/6614060
rundir will compile each file in the directory in lexicographic order, link the last file as the main package and run the resulting program. rundircmpout is an related command, that will compare the output of the program to an corresponding .out file
errorcheckdir will compile each file in a directory in lexicographic order, running errorcheck on each file as it compiles. All compilations are assumed to be successful except for the last file. However, If a -0 flag is present on the command, the last compilation will also be assumed successful
This CL also includes a small refactoring of run.go. It was getting unwieldy and the meaning of the run commands was hidden behind argument line formatting.
Fixes#4058.
R=rsc, minux.ma, remyoudompheng, iant
CC=golang-dev
https://golang.org/cl/6554071
Today, if run.go doesn't understand a test header line it just ignores
the test, making it too easy to write or edit tests that are not actually
being run.
- expand errorcheck to accept flags, so that bounds.go and escape*.go can run.
- create a whitelist of skippable tests in run.go; skipping others is an error.
- mark all skipped tests at top of file.
Update #4139.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/6549054
use a function to get stdout and stderr, instead of depending
on a specific libc implementation.
also make test/run.go replace \r\n by \n before comparing
output.
Fixes#2121.
Part of issue 1741.
R=alex.brainman, rsc, r, remyoudompheng
CC=golang-dev
https://golang.org/cl/5847068
Enhances test/run.go to support testing other directories
Will enable stdio tests on Windows in a follow-up CL.
R=golang-dev, alex.brainman, rsc
CC=golang-dev
https://golang.org/cl/6220049
we can't import "./bug0" on windows, as it will trigger
"import path contains invalid character ':'" error.
instead, we pass "-D." and "-I." to gc to override this
behavior. this idea is due to remyoudompheng.
R=golang-dev, r, alex.brainman, remyoudompheng
CC=golang-dev
https://golang.org/cl/6441074
The compiledir pattern compiles all files xxx.dir/*.go
in lexicographic order (which is assumed to coincide with
the topological order of dependencies).
R=rsc
CC=golang-dev, remy
https://golang.org/cl/6440048
