The cipher suites were apparently renamed late in the standardization
process, and we picked up the legacy name. We can't remove the old
constants, but add correctly named ones.
Fixes#32061
Change-Id: I65ee25c12c10934391af88b76b18565da67453fa
Reviewed-on: https://go-review.googlesource.com/c/go/+/205068
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
TLS 1.3, which requires RSA-PSS, is now enabled without a GODEBUG
opt-out, and with the introduction of
Certificate.SupportedSignatureAlgorithms (#28660) there is a
programmatic way to avoid RSA-PSS (disable TLS 1.3 with MaxVersion and
use that field to specify only PKCS#1 v1.5 SignatureSchemes).
This effectively reverts 0b3a57b537,
although following CL 205061 all of the signing-side logic is
conveniently centralized in signatureSchemesForCertificate.
Fixes#32425
Change-Id: I7c9a8893bb5d518d86eae7db82612b9b2cd257d7
Reviewed-on: https://go-review.googlesource.com/c/go/+/205063
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
This will let applications stop crypto/tls from using a certificate key
with an algorithm that is not supported by its crypto.Signer, like
hardware backed keys that can't do RSA-PSS.
Fixes#28660
Change-Id: I294cc06bddf813fff35c5107540c4a1788e1dace
Reviewed-on: https://go-review.googlesource.com/c/go/+/205062
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
Now that we have a full implementation of the logic to check certificate
compatibility, we can let applications just list multiple chains in
Certificates (for example, an RSA and an ECDSA one) and choose the most
appropriate automatically.
NameToCertificate only maps each name to one chain, so simply deprecate
it, and while at it simplify its implementation by not stripping
trailing dots from the SNI (which is specified not to have any, see RFC
6066, Section 3) and by not supporting multi-level wildcards, which are
not a thing in the WebPKI (and in crypto/x509).
The performance of SupportsCertificate without Leaf is poor, but doesn't
affect current users. For now document that, and address it properly in
the next cycle. See #35504.
While cleaning up the Certificates/GetCertificate/GetConfigForClient
behavior, also support leaving Certificates/GetCertificate nil if
GetConfigForClient is set, and send unrecognized_name when there are no
available certificates.
Fixes#29139Fixes#18377
Change-Id: I26604db48806fe4d608388e55da52f34b7ca4566
Reviewed-on: https://go-review.googlesource.com/c/go/+/205059
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Katie Hockman <katie@golang.org>
Also, add Version to CertificateRequestInfo, as the semantics of
SignatureSchemes change based on version: the ECDSA SignatureSchemes are
only constrained to a specific curve in TLS 1.3.
Fixes#32426
Change-Id: I7a551bea864799e98118349ac2476162893d1ffd
Reviewed-on: https://go-review.googlesource.com/c/go/+/205058
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
We'll also use this function for a better selection logic from
Config.Certificates in a later CL.
Updates #32426
Change-Id: Ie239574d02eb7fd2cf025ec36721c8c7e082d0bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/205057
Reviewed-by: Katie Hockman <katie@golang.org>
This refactors a lot of the certificate support logic to make it cleaner
and reusable where possible. These changes will make the following CLs
much simpler.
In particular, the heavily overloaded pickSignatureAlgorithm is gone.
That function used to cover both signing and verifying side, would work
both for pre-signature_algorithms TLS 1.0/1.1 and TLS 1.2, and returned
sigalg, type and hash.
Now, TLS 1.0/1.1 and 1.2 are differentiated at the caller, as they have
effectively completely different logic. TLS 1.0/1.1 simply use
legacyTypeAndHashFromPublicKey as they employ a fixed hash function and
signature algorithm for each public key type. TLS 1.2 is instead routed
through selectSignatureScheme (on the signing side) or
isSupportedSignatureAlgorithm (on the verifying side) and
typeAndHashFromSignatureScheme, like TLS 1.3.
On the signing side, signatureSchemesForCertificate was already version
aware (for PKCS#1 v1.5 vs PSS support), so selectSignatureScheme just
had to learn the Section 7.4.1.4.1 defaults for a missing
signature_algorithms to replace pickSignatureAlgorithm.
On the verifying side, pickSignatureAlgorithm was also checking the
public key type, while isSupportedSignatureAlgorithm +
typeAndHashFromSignatureScheme are not, but that check was redundant
with the one in verifyHandshakeSignature.
There should be no major change in behavior so far. A few minor changes
came from the refactor: we now correctly require signature_algorithms in
TLS 1.3 when using a certificate; we won't use Ed25519 in TLS 1.2 if the
client didn't send signature_algorithms; and we don't send
ec_points_format in the ServerHello (a compatibility measure) if we are
not doing ECDHE anyway because there are no mutually supported curves.
The tests also got simpler because they test simpler functions. The
caller logic switching between TLS 1.0/1.1 and 1.2 is tested by the
transcript tests.
Updates #32426
Change-Id: Ice9dcaea78d204718f661f8d60efdb408ba41577
Reviewed-on: https://go-review.googlesource.com/c/go/+/205061
Reviewed-by: Katie Hockman <katie@golang.org>
This CL is based on work started by Joe Tsai in CL 94855.
It's rebased on top of the latest master branch, and
addresses various code review comments and findings
from attempting to use the original CL in practice.
The testing package documents a naming convention for examples
so that documentation tools can associate them with:
• a package (Example or Example_suffix)
• a function F (ExampleF or ExampleF_suffix)
• a type T (ExampleT or ExampleT_suffix)
• a method T.M (ExampleT_M or ExampleT_M_suffix)
This naming convention is in widespread use and enforced
via existing go vet checks.
This change adds first-class support for classifying examples
to go/doc, the package responsible for computing package
documentation from Go AST.
There isn't a way to supply test files to New that works well.
External test files may have a package name with "_test" suffix,
so ast.NewPackage may end up using the wrong package name if given
test files. A workaround is to add test files to *ast.Package.Files
after it is returned from ast.NewPackage:
pkg, _ := ast.NewPackage(fset, goFiles, ...)
for name, f := range testGoFiles {
pkg.Files[name] = f
}
p := doc.New(pkg, ...)
But that is not a good API.
After nearly 8 years, a new entry-point is added to the go/doc
package, the function NewFromFiles. It accepts a Go package in
the form of a list of parsed Go files (including _test.go files)
and an import path. The caller is responsible with filtering out
files based on build constraints, as was the case before with New.
NewFromFiles computes package documentation from .go files,
extracts examples from _test.go files and classifies them.
Examples fields are added to Package, Type, and Func. They are
documented to only be populated with examples found in _test.go
files provided to NewFromFiles.
The new behavior is:
1. NewFromFiles computes package documentation from provided
parsed .go files. It extracts examples from _test.go files.
2. It assigns each Example to corresponding Package, Type,
or Func.
3. It sets the Suffix field in each example to the suffix.
4. Malformed examples are skipped.
This change implements behavior that matches the current behavior
of existing godoc-like tools, and will enable them to rely on the
logic in go/doc instead of reimplementing it themselves.
Fixes#23864
Change-Id: Iae834f2ff92fbd1c93a9bb7c2bf47d619bee05cf
Reviewed-on: https://go-review.googlesource.com/c/go/+/204830
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Disable a portion of the TestDWARF testpoint for Windows using
c-archive buildmode, pending investigation of the issue at hand, so as
to get the longtest builder unblocked.
Updates #35512.
Change-Id: Ib72d82ceaa674b9a51da220fb8e225231d5c3433
Reviewed-on: https://go-review.googlesource.com/c/go/+/206557
Run-TryBot: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
This test failed in a pending CL, and I would rather debug it as a script.
Change-Id: I231367c86415ab61d0f9e08b88c9546d32b373b7
Reviewed-on: https://go-review.googlesource.com/c/go/+/206498
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This test failed in a pending CL, and I would rather debug it as a script.
Change-Id: I0ae7486a9949bea40d5dd36afe6919f86f14dfa7
Reviewed-on: https://go-review.googlesource.com/c/go/+/206499
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL restores behavior before CL 189797 and fixes a misleading
comment. modload.ListModules may return info without a version for the
main module and for modules replaced with local directories.
Fixes#35505
Change-Id: I5b4e68053a680ff897b072fdf6e7aa17b6e1ac34
Reviewed-on: https://go-review.googlesource.com/c/go/+/206538
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
This allows the target of 'go build' to be a filename constructed
using ioutil.TempFile or similar, without racily deleting the file
before rebuilding it.
Updates #32407
Updates #28387
Change-Id: I4c5072830a02b93f0c4186b50bffa9de00257afe
Reviewed-on: https://go-review.googlesource.com/c/go/+/206477
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Apply the suggestions made in the too-late review of
golang.org/cl/137215
to move the comments to a separate line and use proper
punctuation.
Change-Id: If2b4e5ce8af8c78fa51280d5c87c852a76dae459
Reviewed-on: https://go-review.googlesource.com/c/go/+/206125
Reviewed-by: Robert Griesemer <gri@golang.org>
This makes Ed25519 certificates work for CreateCRL(). This previously
failed (panic: crypto: requested hash function #0 is unavailable) because
the hash could not be skipped, but Ed25519 uses no hash.
A similar fix has been applied in a few other places when Ed25519 was added
when Ed25519 certificates were originally introduced, but was missed
here.
Change-Id: I16fcfcd53ba3bb8f773e5de972b8fedde1f6350e
Change-Id: I16fcfcd53ba3bb8f773e5de972b8fedde1f6350e
GitHub-Last-Rev: bf7f1458f8
GitHub-Pull-Request: golang/go#35241
Reviewed-on: https://go-review.googlesource.com/c/go/+/204046
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
search.CleanPatterns now preserves backslash separators in absolute
paths in Windows. These had resulted in inconsistent error messages.
search.MatchPackagesInFS is now more accepting of patterns with
backslashes. It was inconsistent before.
Several tests are fixed to work with Windows (mostly to match slashes
or backslashes).
Fixes#25300
Change-Id: Ibbf9ccd145353f7e3d345205c6fcc01d7066d1c2
Reviewed-on: https://go-review.googlesource.com/c/go/+/206144
Run-TryBot: Jay Conrod <jayconrod@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The problem causing the assert in #21647 are fixed at this point,
along with various other linker issues with plugin + Darwin. With
this in mind, remove the "-ldflags=-w" workaround for plugin mode on
Darwin and re-enable the appropriate tests misc/cgo/testplugin
Fixes#21647.
Fixes#27502.
Change-Id: I5b662987b138b06cfc9e1f9f6d804cf682bd501a
Reviewed-on: https://go-review.googlesource.com/c/go/+/206198
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Assorted fixups in the linker needed to enable turning back on
DWARF generation when building plugins for Darwin. Includes:
- don't suppress import of runtime/cgo in the linker for
Darwin if we are linking in plugin mode
- in calcCompUnitRanges handle the case where we encounter
linker-generated functions that have no associated Unit (and
also have no DWARF)
- generalize a guard in relocsym() include so as to avoid
triggering a spurious error on go.info symbols in plugin mode
Updates #21647.
Updates #27502.
Change-Id: I317fea97bef2f3461e31498e63f9fd6d8b8f4b23
Reviewed-on: https://go-review.googlesource.com/c/go/+/182959
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Otherwise we'd panic with a stack overflow.
Most programs are in control of the data being encoded and can ensure
there are no cycles, but sometimes it's not that simple. For example,
running a user's html template with script tags can easily result in
crashes if the user can find a pointer cycle.
Adding the checks via a map to every ptrEncoder.encode call slowed down
the benchmarks below by a noticeable 13%. Instead, only start doing the
relatively expensive pointer cycle checks if we're many levels of
pointers deep in an encode state.
A threshold of 1000 is small enough to capture pointer cycles before
they're a problem (the goroutine stack limit is currently 1GB, and I
needed close to a million levels to reach it). Yet it's large enough
that reasonable uses of the json encoder only see a tiny 1% slow-down
due to the added ptrLevel field and check.
name old time/op new time/op delta
CodeEncoder-8 2.34ms ± 1% 2.37ms ± 0% +1.05% (p=0.000 n=10+10)
CodeMarshal-8 2.42ms ± 1% 2.44ms ± 0% +1.10% (p=0.000 n=10+10)
name old speed new speed delta
CodeEncoder-8 829MB/s ± 1% 820MB/s ± 0% -1.04% (p=0.000 n=10+10)
CodeMarshal-8 803MB/s ± 1% 795MB/s ± 0% -1.09% (p=0.000 n=10+10)
name old alloc/op new alloc/op delta
CodeEncoder-8 43.1kB ± 8% 42.5kB ±10% ~ (p=0.989 n=10+10)
CodeMarshal-8 1.99MB ± 0% 1.99MB ± 0% ~ (p=0.254 n=9+6)
name old allocs/op new allocs/op delta
CodeEncoder-8 0.00 0.00 ~ (all equal)
CodeMarshal-8 1.00 ± 0% 1.00 ± 0% ~ (all equal)
Finally, add a few tests to ensure that the code handles the edge cases
properly.
Fixes#10769.
Change-Id: I73d48e0cf6ea140127ea031f2dbae6e6a55e58b8
Reviewed-on: https://go-review.googlesource.com/c/go/+/187920
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bjørn Erik Pedersen <bjorn.erik.pedersen@gmail.com>
Reviewed-by: Andrew Bonventre <andybons@golang.org>
Before this CL, if max > min and max was unaligned to min, then the
function could return an unaligned (unaligned to min) region to
scavenge. On most platforms, this leads to some kind of crash.
Fix this by explicitly aligning max to the next multiple of min.
Fixes#35445.
Updates #35112.
Change-Id: I0af42d4a307b48a97e47ed152c619d77b0298291
Reviewed-on: https://go-review.googlesource.com/c/go/+/206277
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Intrinsify these functions to match other platforms. Update the
sequence of instructions used in the assembly implementations to
match the intrinsics.
Also, add a micro benchmark so we can more easily measure the
performance of these two functions:
name old time/op new time/op delta
And8-8 5.33ns ± 7% 2.55ns ± 8% -52.12% (p=0.000 n=20+20)
And8Parallel-8 7.39ns ± 5% 3.74ns ± 4% -49.34% (p=0.000 n=20+20)
Or8-8 4.84ns ±15% 2.64ns ±11% -45.50% (p=0.000 n=20+20)
Or8Parallel-8 7.27ns ± 3% 3.84ns ± 4% -47.10% (p=0.000 n=19+20)
By using a 'rotate then xor selected bits' instruction combined with
either a 'load and and' or a 'load and or' instruction we can
implement And8 and Or8 with far fewer instructions. Replacing
'compare and swap' with atomic instructions may also improve
performance when there is contention.
Change-Id: I28bb8032052b73ae8ccdf6e4c612d2877085fa01
Reviewed-on: https://go-review.googlesource.com/c/go/+/204277
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
On some platforms (currently ARM and ARM64), when calling into
VDSO we store the G to the gsignal stack, if there is one, so if
we receive a signal during VDSO we can find the G.
If we receive a signal during VDSO, and within the signal handler
we call nanotime again (e.g. when handling profiling signal),
we'll save/clear the G slot on the gsignal stack again, which
clobbers the original saved G. If we receive a second signal
during the same VDSO execution, we will fetch a nil G, which will
lead to bad things such as deadlock.
Don't save G if we're calling VDSO code from the gsignal stack.
Saving G is not necessary as we won't receive a nested signal.
Fixes#35473.
Change-Id: Ibfd8587a3c70c2f1533908b056e81b94d75d65a5
Reviewed-on: https://go-review.googlesource.com/c/go/+/206397
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Renames variables sizeof_Array and other array_* variables
that were actually intended for slices and not arrays.
Change-Id: I391b95880cc77cabb8472efe694b7dd19545f31a
Reviewed-on: https://go-review.googlesource.com/c/go/+/180919
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This reverts CL 129118 (commit aff3aaa47f)
Reason for revert: It was retracted by the author in a comment on the PR
but that doesn't get synced to Gerrit, and the Gerrit CL wasn't closed
when the PR was closed.
Change-Id: I5ad16e96f98a927972187dc5c9df3a0e9b9fafa8
Reviewed-on: https://go-review.googlesource.com/c/go/+/206377
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
This is intended to allow IDEs to note where the optimizer
was not able to improve users' code. There may be other
applications for this, for example in studying effectiveness
of optimizer changes more quickly than running benchmarks,
or in verifying that code changes did not accidentally disable
optimizations in performance-critical code.
Logging of nilcheck (bad) for amd64 is implemented as
proof-of-concept. In general, the intent is that optimizations
that didn't happen are what will be logged, because that is
believed to be what IDE users want.
Added flag -json=version,dest
Check that version=0. (Future compilers will support a
few recent versions, I hope that version is always <=3.)
Dest is expected to be one of:
/path (or \path in Windows)
will create directory /path and fill it w/ json files
file://path
will create directory path, intended either for
I:\dont\know\enough\about\windows\paths
trustme_I_know_what_I_am_doing_probably_testing
Not passing an absolute path name usually leads to
json splattered all over source directories,
or failure when those directories are not writeable.
If you want a foot-gun, you have to ask for it.
The JSON output is directed to subdirectories of dest,
where each subdirectory is net/url.PathEscape of the
package name, and each for each foo.go in the package,
net/url.PathEscape(foo).json is created. The first line
of foo.json contains version and context information,
and subsequent lines contains LSP-conforming JSON
describing the missing optimizations.
Change-Id: Ib83176a53a8c177ee9081aefc5ae05604ccad8a0
Reviewed-on: https://go-review.googlesource.com/c/go/+/204338
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This change makes go env -w and -u check invalid GOOS and GOARCH values and abort if that's the case.
Fixes#34194
Change-Id: Idca8e93bb0b190fd273bf786c925be7993c24a2b
GitHub-Last-Rev: ee67f09d75
GitHub-Pull-Request: golang/go#34221
Reviewed-on: https://go-review.googlesource.com/c/go/+/194617
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
The variable now implies that the next tick always
returns the current time which is not always the case.
Change it to next to clarify that it returns
the time of the next tick which is more appropriate.
Fixes#30271
Change-Id: Ie7719cb8c7180bc6345b436f9b3e950ee349d6e4
Reviewed-on: https://go-review.googlesource.com/c/go/+/206123
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
This change makes the test addresses start at 1 GiB instead of 2 GiB to
support mips and mipsle, which only have 31-bit address spaces.
It also changes some tests to use smaller offsets for the chunk index to
avoid jumping too far ahead in the address space to support 31-bit
address spaces. The tests don't require such large jumps for what
they're testing anyway.
Updates #35112.
Fixes#35440.
Change-Id: Ic68ff2b0a1f10ef37ac00d4bb5b910ddcdc76f2e
Reviewed-on: https://go-review.googlesource.com/c/go/+/205938
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
os.OpenFile was assuming that a failed syscall.Open means the file does
not exist and it tries to create it. However, syscall.Open may have
failed for some other reason, such as failing to lock a os.ModeExclusive
file. We change os.OpenFile to only create the file if the error
indicates that the file doesn't exist.
Remove skip of TestTransform test, which was failing because sometimes
syscall.Open would fail due to the file being locked, but the
syscall.Create would succeed because the file is no longer locked. The
create was truncating the file.
Fixes#35471
Change-Id: I06583b5f8ac33dc90a51cc4fb64f2d8d9c0c2113
Reviewed-on: https://go-review.googlesource.com/c/go/+/206299
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Setting InsecureSkipVerify and VerifyPeerCertificate is the recommended
way to customize and override certificate validation.
However, there is boilerplate involved and it usually requires first
reimplementing the default validation strategy to then customize it.
Provide an example that does the same thing as the default as a starting
point.
Examples of where we directed users to do something similar are in
issues #35467, #31791, #28754, #21971, and #24151.
Fixes#31792
Change-Id: Id033e9fa3cac9dff1f7be05c72dfb34b4f973fd4
Reviewed-on: https://go-review.googlesource.com/c/go/+/193620
Reviewed-by: Adam Langley <agl@golang.org>
When we have already assigned the semaphore ticket to a specific
waiter, we want to get the waiter running as fast as possible since
no other G waiting on the semaphore can acquire it optimistically.
The net effect is that, when a sync.Mutex is contended, the code in
the critical section guarded by the Mutex gets a priority boost.
Fixes#33747
The original work was done in CL 200577 by Carlo Alberto Ferraris. The
change was reverted in CL 205817 because it broke the linux-arm64-packet
and solaris-amd64-oraclerel builders.
Change-Id: I76d79b1d63fd206ed1c57fe6900cb7ae9e4d46cb
Reviewed-on: https://go-review.googlesource.com/c/go/+/206180
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
On MIPS, Linux returns whether the syscall had an error in a separate
register (R7), not using a negative return value as on other
architectures. Thus, skip TestSyscallNoError as there is no error case
for syscall.RawSyscall which it could test against.
Also reformat the error output so the expected and gotten values are
aligned so they're easier to compare.
Fixes#35422
Change-Id: Ibc88f7c5382bb7ee8faf15ad4589ca1f9f017a06
Reviewed-on: https://go-review.googlesource.com/c/go/+/205898
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This restores intrinsic status to functions copied from math/bits
into runtime/internal/sys, as an aid to runtime performance.
Updates #35112.
Change-Id: I41a7d87cf00f1e64d82aa95c5b1000bc128de820
Reviewed-on: https://go-review.googlesource.com/c/go/+/206200
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Now that the runtime can send preemption signals, it is possible that
a channel that asks for all signals can see both SIGURG and SIGHUP
before reading either, in which case one of the signals will be dropped.
We have to use a larger buffer so that the test see the signal it expects.
Fixes#35466
Change-Id: I36271eae0661c421780c72292a5bcbd443ada987
Reviewed-on: https://go-review.googlesource.com/c/go/+/206257
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
CL 201765 activated calls from the runtime to functions in math/bits.
When coverage and race detection were simultaneously enabled,
this caused a crash when the covered+race-checked code in
math/bits was called from the runtime before there was even a P.
PS Win for gdlv in helping sort this out.
TODO - next CL intrinsifies the new functions in
runtime/internal/sys
TODO/Would-be-nice - Ctz64 and TrailingZeros64 are the same
function; 386.s is intrinsified; clean all that up.
Fixes#35461.
Updates #35112.
Change-Id: I750a54dba493130ad3e68a06530ede7687d41e1d
Reviewed-on: https://go-review.googlesource.com/c/go/+/206199
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
