The Node printing code is tangled up due to the multiple printing modes.
Split out the Dump mode into its own code, which clarifies it considerably.
We are going to have to change the code for the new Node representations,
so it is nice to have it in an understandable form first.
The output of Dump is unchanged except for the removal of spurious
mid-Dump blank lines that have been printed for a while but don't
really make sense and appear to be a bug.
The %+v verb on Op prints the name ("ADD" not "+"), matching
%+v on Node and %+v on Nodes to get Dump and DumpList formats.
Passes buildall w/ toolstash -cmp.
Change-Id: I07f0f245859f1f785e10bdd671855ca43c51b545
Reviewed-on: https://go-review.googlesource.com/c/go/+/275774
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This code is a few layer of abstraction stacked up on top
of each other, and they're hard to see all at the same time
because the file is pretty mixed up. As much as I try to avoid
code rearrangement to keep history, this one is long overdue.
A followup CL will cut out some of the layers, and the diff will be
much clearer what's going on with the code ordered with
callers near callees, as it is now.
Passes buildall w/ toolstash -cmp.
Change-Id: Iffc49d43cf4be9fab47e2dd59a5f98930573350f
Reviewed-on: https://go-review.googlesource.com/c/go/+/275773
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This is unreachable code - the only way short can be true is
if verb == 'S', but jconv is only called when verb == 'j'.
Simplify by removing.
Passes buildall w/ toolstash -cmp.
Change-Id: I27bd38319f72215069e940b320b5c82608e2651a
Reviewed-on: https://go-review.googlesource.com/c/go/+/275772
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Ending typecheck1 in the switch makes it safe for each case
to do an appropriate type assertion. The main change is dropping
the computation of "ok" and using the syntax nodes themselves
to decide what's OK.
Passes buildall w/ toolstash -cmp.
Change-Id: I2a1873a51e3f1194d74bb87a6653cb9857a02a1b
Reviewed-on: https://go-review.googlesource.com/c/go/+/275444
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Add Node method generator by Matthew Dempsky,
lightly adapted to account for a few special cases.
No more writing these by hand.
Change-Id: I6933b895df666928b851bddf81b994799c0c97f7
Reviewed-on: https://go-review.googlesource.com/c/go/+/275434
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
sys/unistd.h only exists in glibc and not in musl so use the standard
location. This is a regression from CL 210639
Change-Id: Idd4c75510d9829316b44300c36c34df6d667cc05
GitHub-Last-Rev: 0fa4162f1c
GitHub-Pull-Request: golang/go#43038
Reviewed-on: https://go-review.googlesource.com/c/go/+/275732
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Andrew G. Morgan <agm@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Filippo Valsorda <filippo@golang.org>
The gofrontend code would in some circumstances incorrectly generate a
type descriptor for an alias type, causing the type to fail to be
equal to the unaliased type.
Change-Id: I47d33b0bfde3c72a9a186049539732bdd5a6a96e
Reviewed-on: https://go-review.googlesource.com/c/go/+/275632
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
For #40700
Change-Id: Idea442d45d18ca8cedc0b160df23eac6b86755ef
Reviewed-on: https://go-review.googlesource.com/c/go/+/275677
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Enabled fixedbugs/issue8183.go for run.go with new typechecker
now that issue is fixed.
Fixes#42992.
Updates #42991.
Change-Id: I23451999983b740d5f37ce3fa75ee756daf1a44f
Reviewed-on: https://go-review.googlesource.com/c/go/+/275517
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
If an interface contains a blank method, that's already an error. No
need for useless follow-up error messages about not implementing them.
Fixes#42964.
Change-Id: I5bf53a8f27d75d4c86c61588c5e2e3e95563d320
Reviewed-on: https://go-review.googlesource.com/c/go/+/275294
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
In the past, we had a lot of trouble with misusing *types.Sym
throughout the frontend, so I tried to push us towards always passing
around ONAMEs instead. But for constructing and writing out the symbol
indexes for the indexed export data, keying by *types.Sym is exactly
what we want.
Passes buildall w/ toolstash -cmp.
Updates #42982.
Change-Id: Idd8f1fb057d75a52a34ebc7788d9332fb49caf8d
Reviewed-on: https://go-review.googlesource.com/c/go/+/275755
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
All of the uses were already using *ir.Func index operands, so only
needs the map type itself updated.
Passes buildall w/ toolstash -cmp.
Updates #42982.
Change-Id: I568d8601f3eb077e07e887f2071aa1a2667d803c
Reviewed-on: https://go-review.googlesource.com/c/go/+/275754
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Similar to the previous CL, the only two users of NodeQueue only
needed it for tracking objects, not arbitrary AST nodes. So change
it's signature to use *Name instead of Node.
This does require a tweak to the nowritebarrierrec checker, because
previously it was pushing the ODCLFUNC *Func pointers into the queue,
whereas now we push the ONAME/PFUNC *Name pointers instead. However,
it's trivial and safe to flip between them.
Also, this changes a handful of export-related code from Node to
*Name, to avoid introducing type assertions within iexport.go.
Passes buildall w/ toolstash -cmp.
Updates #42982.
Change-Id: I867f9752121509fc3da753978c6a41d5015bc0ce
Reviewed-on: https://go-review.googlesource.com/c/go/+/275753
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
The only user of NodeSet (computing initialization dependencies) only
needs to store *Names in this structure. So change its definition to
match that need, and update the code in initorder.go accordingly.
Passes buildall w/ toolstash -cmp.
Updates #42982.
Change-Id: I181a8aaf9bc71e88f4ac009c4f381a718080e48f
Reviewed-on: https://go-review.googlesource.com/c/go/+/275752
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
According to [1], this function returns NULL when it errors, rather than
INVALID_HANDLE_VALUE, which other Win32 functions return. This was
pointed out in CL 273446 for the x/sys package, and this patch here
cleans it up for the syscall package and updates the vendored x/sys
package using the usual `go get/go mod vendor` dance. The function is
currently in use by crypto/x509/root_windows.go, which calls
CertOpenStore(CERT_STORE_PROV_MEMORY), which I assume can fail under OOM
or other weird conditions. Quick reversing indicates that [1] is
correct, as there's a `xor eax, eax` in the error paths of the function
just before jumping to the epilogue.
[1] https://docs.microsoft.com/en-us/windows/win32/api/wincrypt/nf-wincrypt-certopenstore#return-value
Change-Id: I77c0b0319c13313212f8710785252c494da56ed5
Reviewed-on: https://go-review.googlesource.com/c/go/+/273827
Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
Trust: Jason A. Donenfeld <Jason@zx2c4.com>
Trust: Alex Brainman <alex.brainman@gmail.com>
Pulls in a fix to make versioned import paths more readable in pprof's
graph view.
Updated via the instructions in README.vendor.
Updates #36905
Change-Id: I6a91de0f4ca1be3fc69d8e1a39ccf4f5bd0387ef
Reviewed-on: https://go-review.googlesource.com/c/go/+/275513
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Change-Id: I103e3eeacd5b11efd63c965482a626878ba5ac81
Reviewed-on: https://go-review.googlesource.com/c/go/+/275216
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Currently, because we use the same *Name to represent both declaration
and uses of an object, it's ambiguous what "n1 == n2" means when
comparing two Node values. It can mean any of: Are these the same
syntactic element? Is n1 a use of declared variable n2? Are n1 and n2
both uses of the same declared variable?
We'd like to introduce a new IdentExpr node to replace use of Name
within the AST, but that means those three cases need to be handled
differently. The first case needs to stay "n1 == n2", but the other
cases need to become "n1.Name() == n2" and "n1.Name() == n2.Name()",
respectively. ("n1.Name() == n2.Name()" also currently works for the
second case, but eventually we'll want to get rid of the Name.Name
method.)
This CL introduces helper functions SameSource and Uses to handle
these cases. It also introduces DeclaredBy, which is another somewhat
common case that the next CL introduces uses of.
Passes buildall w/ toolstash -cmp.
Updates #42990.
Change-Id: Ia816c124446e9067645d5820a8163f295968794f
Reviewed-on: https://go-review.googlesource.com/c/go/+/275305
Reviewed-by: Russ Cox <rsc@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
There are no language changes in Go 1.16, so document that.
For #40700.
Fixes#42976.
Change-Id: I80b0d2ce6cf550c00c0f026ee59ac9fbce6310be
Reviewed-on: https://go-review.googlesource.com/c/go/+/275117
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The only reason for the DeepCopyNode interface was to
allow the type syntaxes to avoid being constrained by
Left, Right etc. methods. Now those are gone, so the
general traversal methods they implement (doChildren, editChildren)
do the right thing for DeepCopy.
Passes buildall w/ toolstash -cmp.
Change-Id: I54672c011114a95efabff32dbcf02e6071f91b9e
Reviewed-on: https://go-review.googlesource.com/c/go/+/275379
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
deadcode is trying to walk the statements it can find,
but it can sweep in other nodes too. Stop doing that:
only walk known statements containing statements.
Otherwise, if we put panics in expression accessors that
shouldn't be used anymore, deadcode can trip them.
deadcode would be a good candidate to rewrite using
EditChildren, but that would certainly cause toolstash
changes, since deadcode is so ad-hoc about exactly
which parts of the function it looks at. For now just
remove the general traversal and leave as is.
Passes buildall w/ toolstash -cmp.
Change-Id: I06481eb87350905597600203c4fa724d55645b46
Reviewed-on: https://go-review.googlesource.com/c/go/+/275377
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Put each node in charge of its EditChildren implementation.
This removes the final generic use of Left, SetLeft, Right, SetRight,
and so on in package ir.
Passes buildall w/ toolstash -cmp.
Change-Id: I9821cc20f5b91cc9b44eb1f386cc82f20cd6770c
Reviewed-on: https://go-review.googlesource.com/c/go/+/275376
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Put each node in charge of its DoChildren implementation.
This removes a generic use of Left, Right, and so on
in func DoChildren, heading toward removing those even from
being used in package ir.
Passes buildall w/ toolstash -cmp.
Change-Id: Ibdf56f36801217cf24549e063da0078c1820a56b
Reviewed-on: https://go-review.googlesource.com/c/go/+/275375
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Put each node in charge of making copies of its own slices.
This removes a generic use of Body, SetBody, and so on
in func Copy, heading toward removing those even from
being used in package ir.
Passes buildall w/ toolstash -cmp.
Change-Id: I249b7fe54cf72e9d2f0467b10f3f257abf9b29b9
Reviewed-on: https://go-review.googlesource.com/c/go/+/275374
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This CL rephrases the general inlining rewriter in terms of ir.EditChildren.
It is the final part of the code that was processing arbitrary nodes using
Left, SetLeft, and so on. After this CL, there should be none left except
for the implementations of DoChildren and EditChildren, which fall next.
Passes buildall w/ toolstash -cmp.
Change-Id: I9c36053360cd040710716f0b39397a80114be713
Reviewed-on: https://go-review.googlesource.com/c/go/+/275373
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This CL converts all the generic searching traversal to use ir.Find
instead of relying on direct access to Left, Right, and so on.
Passes buildall w/ toolstash -cmp.
Change-Id: I4d951aef630c00bf333f24be79565cc564694d04
Reviewed-on: https://go-review.googlesource.com/c/go/+/275372
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This CL introduces the general visitor functionality that will replace
the Left, SetLeft, Right, SetRight, etc methods in the Node interface.
For now, the CL defines the functionality in terms of those methods,
but eventually the Nodes themselves will implement DoChildren
and EditChildren and be relieved of implementing Left, SetLeft, and so on.
The CL also updates Inspect (which moved to visit.go) and DeepCopy
to use the new functionality.
The Find helper is not used in this CL but will be used in a future one.
Passes buildall w/ toolstash -cmp.
Change-Id: Id0eea654a884ab3ea25f48bd8bdd71712b5dcb44
Reviewed-on: https://go-review.googlesource.com/c/go/+/275311
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Now inlcopy and ir.DeepCopy are semantically the same,
so drop the inlcopy implementation.
Passes buildall w/ toolstash -cmp.
Change-Id: Id2abb39a412a8e57167a29be5ecf76e990dc9d3d
Reviewed-on: https://go-review.googlesource.com/c/go/+/275310
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
DeepCopy is not called DeepSepCopy, so it should use Copy, not SepCopy.
Also, the old gc.treecopy, which became ir.DeepCopy, only copied
the Left, Right, and List fields - not Init, Rlist, Body - and I didn't
notice when I moved it over. A general utility function should of
course copy the whole node, so do that.
Finally, the semantics of Copy should not depend on whether a
particular child node is held directly in a field or in a slice,
so make Copy duplicate the slice backing arrays as well.
(Logically, those backing arrays are part of the node storage.)
Passes buildall w/ toolstash -cmp.
Change-Id: I18fbe3f2b40078f566ed6370684d5585052b36a1
Reviewed-on: https://go-review.googlesource.com/c/go/+/275309
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The upcoming general iterators will process nodes in
source code order, meaning that the "then" block comes
before the "else" block. But for an if node, "then" is Body
while "else" is Rlist, and the inliner processes Rlist first.
The order of processing changes the order of inlining decisions,
which can affect which functions are inlined, but in general
won't affect much. (It's not like we know that we should prefer
to inline functions in else bodies over then bodies.)
Swapping these is not safe for toolstash -cmp.
Doing it in a separate CL lets the upcoming CLs all be toolstash-safe.
Change-Id: Id16172849239b0564930d2bbff1260ad6d03d5ab
Reviewed-on: https://go-review.googlesource.com/c/go/+/275308
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Sub provides a convenient way to refer to a subdirectory
automatically in future operations, like Unix's chdir(2).
The CL also includes updates to fstest to check Sub implementations.
As part of updating fstest, I changed the meaning of TestFS's
expected list to introduce a special case: if you list no expected files,
that means the FS must be empty. In general it's OK not to list all
the expected files, but if you list none, that's almost certainly a
mistake - if your FS were broken and empty, you wouldn't find out.
Making no expected files mean "must be empty" makes the mistake
less likely - if your file system ever worked, then your test will keep
it working.
That change found a testing bug: embedtest was making exactly
that mistake.
Fixes#42322.
Change-Id: I63fd4aa866b30061a0e51ca9a1927e576d6ec41e
Reviewed-on: https://go-review.googlesource.com/c/go/+/274856
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The iOS kernel has the same problem as the macOS kernel. Extend
the workaround of #41702 (CL 262438 and CL 262817) to iOS.
Updates #35851.
Change-Id: I7ccec00dc96643c08c5be8b385394856d0fa0f64
Reviewed-on: https://go-review.googlesource.com/c/go/+/275293
Trust: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Go 1.16 will be the last to support macOS 10.12 Sierra.
Go 1.17 will require macOS 10.13 High Sierra.
For #23011.
Change-Id: I80052bdde4d9f1c5d71b67b85f65fb0b40856750
Reviewed-on: https://go-review.googlesource.com/c/go/+/275299
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Discussion on #42328 led to a decision to exclude files matching
.* and _* from embedded directory results when embedding an
entire directory tree.
This CL implements that new behavior.
Fixes#42328.
Change-Id: I6188994e96348b3449c7d9d3d0d181cfbf2d4db1
Reviewed-on: https://go-review.googlesource.com/c/go/+/275092
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For #40700
Change-Id: I0083db494284d6142e1b8b981fca4ac30af2012a
Reviewed-on: https://go-review.googlesource.com/c/go/+/275312
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Filippo Valsorda <filippo@golang.org>
This CL consolidates and cleans up fmt.go's logic for skipping past
Nodes introduced during typechecking. This allows eliminating SetOrig
on ConvExpr and Name. Also changes ConstExpr.SetOrig to a panic for
good measure.
The only remaining SetOrig uses now are for rewriting multi-value
"f(g())" calls and "return g()" statements, and type-checking
composite literals. It should be possible to eliminate both of those
as well.
Passes buildall w/ toolstash -cmp.
Change-Id: I478aea1a17dfb7a784293b930bf9081637eb2d7a
Reviewed-on: https://go-review.googlesource.com/c/go/+/275179
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Replace existing ad-hoc file exclusion mechanism with list of
excluded files; i.e., files for which the compiler with -G
option doesn't produce matching error messages yet.
Remove -G option since we now always run all passing tests.
Change-Id: I0655d2cf8bc135b3f50b1a811b8f49090c427580
Reviewed-on: https://go-review.googlesource.com/c/go/+/275212
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
