Add type casting to offset.
L246-L247
L1473-L1475
toolstash-check successful.
Change-Id: I816c7556609ca6dd67bff8007c2d006cab89ee2b
Reviewed-on: https://go-review.googlesource.com/c/go/+/257639
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Add support for signed and unsigned register to register moves of various
sizes. This makes it easier to handle zero and sign extension and will allow
for further changes that improve the compiler optimisations for riscv64.
While here, change the existing register to register moves from obj.Prog
rewriting to instruction generation.
Change-Id: Id21911019b76922367a134da13c3449a84a1fb08
Reviewed-on: https://go-review.googlesource.com/c/go/+/264657
Trust: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Updates the (*Data).Ranges method to work with DWARFv5 which uses the
new debug_rnglists section instead of debug_ranges.
This does not include supporting DW_FORM_rnglistx.
General support for DWARFv5 was added by CL 175138.
Change-Id: I01f919a865616a3ff12f5bf649c2c9abf89fcf52
Reviewed-on: https://go-review.googlesource.com/c/go/+/236657
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Emmanuel Odeke <emm.odeke@gmail.com>
The dumpgstatus() will dump current g's status anyway. When lockedg's
status is bad, it's more helpful to dump lockedg's status as well than
dumping current g's status twice.
Change-Id: If5248cb94b9cdcbf4ceea07562237e1d6ee28489
GitHub-Last-Rev: da814c51ff
GitHub-Pull-Request: golang/go#40248
Reviewed-on: https://go-review.googlesource.com/c/go/+/243097
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
For some reason, currently unknown, this test case fails exclusively
on the linux-ppc64 platform. Until such time as it can be made to
work, we'll disable this test case on that platform.
The same issue causes TestSetuidEtc to fail too, so disable that
on this platform.
Updates #42178
Change-Id: Idd3f6c2ee9f2fba2eb8ce4de69de7f316858bb15
Reviewed-on: https://go-review.googlesource.com/c/go/+/264719
Trust: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The test sets a Content-Type where it looks like it wants a Content-Length. The test passes because the Content-Length header is automatically added anyway, but fix the typo and set Content-Length as intended.
Change-Id: Ic2af778f82c3e9d58e164892f6ac6ef5745f884f
Reviewed-on: https://go-review.googlesource.com/c/go/+/246977
Reviewed-by: Damien Neil <dneil@google.com>
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Trust: Damien Neil <dneil@google.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
It's unfortunate that we don't implement PKCS#8 encryption (#8860)
so we can't recommend an alternative but PEM encryption is so broken
that it's worth deprecating outright.
Fixes#41949Fixes#32777
Change-Id: Ieb46444662adec108d0de3550b693a50545c2344
Reviewed-on: https://go-review.googlesource.com/c/go/+/264159
Trust: Filippo Valsorda <filippo@golang.org>
Trust: Roland Shoemaker <roland@golang.org>
Run-TryBot: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Roland Shoemaker <roland@golang.org>
This prevents the custom-built version of openssl prefering the system
libraries over the ones compiled with the specified (weak crypto)
options necessary to generate the updates. This difference can lead to
confusing failures when updating the tests.
Fixes#31809
Change-Id: I2dd257f3121d6c6c62c6aeba52e1c74046b3c584
GitHub-Last-Rev: 6d4eeafadf
GitHub-Pull-Request: golang/go#41630
Reviewed-on: https://go-review.googlesource.com/c/go/+/257517
Trust: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Filippo Valsorda <filippo@golang.org>
addrRanges represents a set of addresses. Currently, passing in a
zero-sized range will cause that range to be added to the list, even
though it doesn't represent any address (addrRanges.contains will still
always return false, and findSucc will give surprising results).
We could ignore this input, but it's almost always a bug for the calling
code to pass in a zero-sized range, so just throw.
Change-Id: I8ed09e15b79a3a33e2d0cf5ed55f9e497388e7a5
Reviewed-on: https://go-review.googlesource.com/c/go/+/242817
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Reviewed-by: Austin Clements <austin@google.com>
This change adds a test suite for addrRanges.findSucc so we can change
the implementation more safely.
For #40191.
Change-Id: I14a834b6d54836cbc676eb0edb292ba6176705cc
Reviewed-on: https://go-review.googlesource.com/c/go/+/242678
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
To allow passing around the package level *Logger, it is now exposed to
callers of the Default function. We considered exposing std, however at
this time there is no need to allow callers to replace std only pass and
call methods directly.
Fixes#39057
Change-Id: I710b16a3aa5e4e878870561dbf59560f98d8d09a
Reviewed-on: https://go-review.googlesource.com/c/go/+/264460
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
The existing usage of grave accent (`) and apostrophe (')
at some places made godoc to ignore them and show it as it is.
So, use both of the characters twice (consecutively) so that
godoc can convert it to {left,right} double quotation mark.
Fixes#41958
Change-Id: I64fd9b5fa34f416ad595009d09f5482e10bd8b4f
Reviewed-on: https://go-review.googlesource.com/c/go/+/262397
Reviewed-by: Russ Cox <rsc@golang.org>
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
This reset of gcBlackenEnabled is a no-op because it was already reset
almost immediately before in gcMarkDone, which is the only caller of
gcMarkTermination.
Adjust the comment to clarify setGCPhase a bit more. We are coming from
_GCmark, so write barriers are already enabled.
Change-Id: Ieac2dadf33c3c5a44e8a25a499dea8cfe03b8d73
Reviewed-on: https://go-review.googlesource.com/c/go/+/241357
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Michael Pratt <mpratt@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
In readonly mode, if a package is not provided by any module in the
build list, and there is an unused replacement that contains the
package, we now recommend a 'go get' command to add a requirement on
the highest replaced version.
Fixes#41416
Change-Id: Iedf3539292c70ea6ba6857433fd184454d9325da
Reviewed-on: https://go-review.googlesource.com/c/go/+/263146
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Trust: Jay Conrod <jayconrod@google.com>
Previously, we would retain entries in go.sum for .mod files in the
module graph (reachable from the main module) and for .zip files
of modules providing packages.
This isn't quite enough: when we load a package, we need the content
of each module in the build list that *could* provide the package
(that is, each module whose path is a prefix of the package's path) so
we can diagnose ambiguous imports.
For #33008
Change-Id: I0b4d9d68c1f4ca382f0983a3a7e537764f35c3aa
Reviewed-on: https://go-review.googlesource.com/c/go/+/262781
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Trust: Jay Conrod <jayconrod@google.com>
If the go command needs a .mod or .zip file in -mod=readonly mode
(now the default), and that file doesn't have a hash in the main
module's go.sum file, the go command will now report an error before
fetching the file, rather than at the end when failing to update
go.sum. The error says specifically which entry is missing.
If this error is encountered when loading the build list, it will
suggest 'go mod tidy'.
If this error is encountered when loading a specific package (an
import or command line argument), the error will mention that package
and will suggest 'go mod tidy' or 'go get -d'.
Fixes#41934Fixes#41935
Change-Id: I96ec2ef9258bd4bade9915c43d47e6243c376a81
Reviewed-on: https://go-review.googlesource.com/c/go/+/262341
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Trust: Jay Conrod <jayconrod@google.com>
When 'go mod init' is run in an existing project, it may import
requirements from a vendor configuration file, but the requirements
may not be complete, and go.sum won't contain sums for module
zips. With -mod=readonly, the next build command is likely to fail.
'go mod init' will now suggest running 'go mod tidy' if there are .go
files or subdirectories in the current directory.
We could potentially run 'go mod tidy' automatically within
'go mod init', but it seems better to guide users to using 'go mod tidy'
as a separate command to fix missing dependencies.
For #41712
Updates #40278
Change-Id: Iaece607f291244588a732ef4c5d576108965ca91
Reviewed-on: https://go-review.googlesource.com/c/go/+/264622
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
InitMod is split into two functions. LoadModFile parses an existing
go.mod file and loads the build list (or checks vendor/modules.txt for
consistency in vendor mode). CreateModFile creates a new go.mod file,
possibly inferring the module path and importing a vendor
configuration file.
Some logic is moved from runInit to CreateModFile. init-specific logic
is removed from other functions.
This CL shouldn't cause substantial differences in behavior, though
some error messages are slightly different.
For #41712
Change-Id: Ia684945cfcf5beca30bbb81e7144fc246c4f27ed
Reviewed-on: https://go-review.googlesource.com/c/go/+/264621
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Previously, if a go.mod file was present, and it only contained a
module directive, any module-aware command would attempt to import
requirements from a vendor configuration file like Gopkg.lock.
This CL removes that functionality. It was undocumented and untested,
and it can cause problems with -mod=readonly. It should never come up
for go.mod files created with 'go mod init', since they have a "go"
directive.
For #40278
Change-Id: I64c0d67d204560aa5c775d29553883d094fd3b72
Reviewed-on: https://go-review.googlesource.com/c/go/+/264620
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
This change adds two new methods for invoking system calls
under Linux: syscall.AllThreadsSyscall() and
syscall.AllThreadsSyscall6().
These system call wrappers ensure that all OSThreads mirror
a common system call. The wrappers serialize execution of the
runtime to ensure no race conditions where any Go code observes
a non-atomic OS state change. As such, the syscalls have
higher runtime overhead than regular system calls, and only
need to be used where such thread (or 'm' in the parlance
of the runtime sources) consistency is required.
The new support is used to enable these functions under Linux:
syscall.Setegid(), syscall.Seteuid(), syscall.Setgroups(),
syscall.Setgid(), syscall.Setregid(), syscall.Setreuid(),
syscall.Setresgid(), syscall.Setresuid() and syscall.Setuid().
They work identically to their glibc counterparts.
Extensive discussion of the background issue addressed in this
patch can be found here:
https://github.com/golang/go/issues/1435
In the case where cgo is used, the C runtime can launch pthreads that
are not managed by the Go runtime. As such, the added
syscall.AllThreadsSyscall*() return ENOTSUP when cgo is enabled.
However, for the 9 syscall.Set*() functions listed above, when cgo is
active, these functions redirect to invoke their C.set*() equivalents
in glibc, which wraps the raw system calls with a nptl:setxid fixup
mechanism. This achieves POSIX semantics for these functions in the
combined Go and C runtime.
As a side note, the glibc/nptl:setxid support (2019-11-30) does not
extend to all security related system calls under Linux so using
native Go (CGO_ENABLED=0) and these AllThreadsSyscall*()s, where
needed, will yield more well defined/consistent behavior over all
threads of a Go program. That is, using the
syscall.AllThreadsSyscall*() wrappers for things like setting state
through SYS_PRCTL and SYS_CAPSET etc.
Fixes#1435
Change-Id: Ib1a3e16b9180f64223196a32fc0f9dce14d9105c
Reviewed-on: https://go-review.googlesource.com/c/go/+/210639
Trust: Emmanuel Odeke <emm.odeke@gmail.com>
Trust: Ian Lance Taylor <iant@golang.org>
Trust: Michael Pratt <mpratt@google.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Reviewed-by: Austin Clements <austin@google.com>
After the first time needCostly is set to true, there is no need to
continue checking the remaining args.
Change-Id: I07171ce50d20e2a917117a0f84c442fe978cb274
GitHub-Last-Rev: 6d0c19341b
GitHub-Pull-Request: golang/go#41859
Reviewed-on: https://go-review.googlesource.com/c/go/+/260638
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Trust: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Go Bot <gobot@golang.org>
To support overlays
For #39958
Change-Id: I5ffd72aeb7f5f30f6c60f6334a01a0a1383c7945
Reviewed-on: https://go-review.googlesource.com/c/go/+/264478
Trust: Michael Matloob <matloob@golang.org>
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
This adds a pass to detect common selection operations,
to avoid generating duplicates. Duplicate offsets are
also detected.
All aggregate types are now handled; there is some freedom in where
expand_calls is run, though it must run before softfloat.
Debug-name-maintenance is now incremental both in decompose builtin
and in expand_calls; it might be good to push this into all the
decompose passes.
(this is a smash of 5 CLs that rewrote some of the same code several
times to deal with phase-ordering problems, and included an abandoned
attempt.)
For #40724.
Change-Id: I2a0c32f20660bf8b99e2bcecd33545d97d2bd3c6
Reviewed-on: https://go-review.googlesource.com/c/go/+/249458
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The history of pageAlloc using 's' as a receiver are lost to the depths
of time (perhaps it used to be called summary?), but it doesn't make
much sense anymore. Rename it to 'p'.
Generated with:
$ cd src/runtime
$ grep -R -b "func (s \*pageAlloc" . | awk -F : '{ print $1 ":#" $2+6 }' | xargs -n 1 -I {} env GOROOT=$(pwd)/../../ gorename -offset {} -to p -v
$ grep -R -b "func (s \*pageAlloc" . | awk -F : '{ print $1 ":#" $2+6 }' | xargs -n 1 -I {} env GOROOT=$(pwd)/../../ GOARCH=386 gorename -offset {} -to p -v
$ GOROOT=$(pwd)/../../ gorename -offset mpagecache.go:#2397 -to p -v
($2+6 to advance past "func (".)
Plus manual comment fixups.
Change-Id: I2d521a1cbf6ebe2ef6aae92e654bfc33c63d1aa9
Reviewed-on: https://go-review.googlesource.com/c/go/+/250517
Trust: Michael Pratt <mpratt@google.com>
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
This one is trivial, as there are already 32-bit AND and OR ops used to
implement the more complex 8-bit versions.
Change-Id: Ic48a53ea291d0067ebeab8e96c82e054daf20ae7
Reviewed-on: https://go-review.googlesource.com/c/go/+/263149
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Michael Pratt <mpratt@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This field is unused since golang.org/cl/134785 and thus can be
trivially removed.
Change-Id: I1a87f8e78ffdf662440409404f0251c40bc56a4f
Reviewed-on: https://go-review.googlesource.com/c/go/+/241741
Trust: Michael Pratt <mpratt@google.com>
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
The GNU strip will shrink text section while xcodetool strip don't.
We have to use xcodetool strip from system explicitly.
Fixes#41967
Change-Id: Ida372869e0ebc9e93f883640b1614836cea3672f
Reviewed-on: https://go-review.googlesource.com/c/go/+/262398
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Trust: Meng Zhuo <mzh@golangcn.org>
This is a simplification of LANfloor/LAOfloor since we have a whole
word.
Change-Id: I791641fb4068cad3f73660ce51699ed4653ae0e6
Reviewed-on: https://go-review.googlesource.com/c/go/+/263151
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Michael Pratt <mpratt@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This is a simple case of changing the operand size of the existing 8-bit
And/Or.
I've also updated a few operand descriptions that were out-of-sync with
the implementation.
Change-Id: I95ac4445d08f7958768aec9a233698a2d652a39a
Reviewed-on: https://go-review.googlesource.com/c/go/+/263150
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Michael Pratt <mpratt@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
These are identical to And8 and Or8, just using LDAXRW/STLXRW instead of
LDAXRB/STLXRB.
Change-Id: I5308832ae165064550bee4bb245809ab952f4cc8
Reviewed-on: https://go-review.googlesource.com/c/go/+/263148
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Michael Pratt <mpratt@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
According to #28614, proposal review agreed in December 2018 that
Match should return an error for failed matches where the unmatched
part of the pattern has a syntax error. (The failed match has to date
caused the scan of the pattern to stop early.)
This change implements that behavior: the match loop continues
scanning to the end of the pattern, even after a confirmed mismatch,
to check whether the pattern is even well-formed.
The change applies to both path.Match and filepath.Match.
Then filepath.Glob and fs.Glob make a single validity-checking
call to Match before beginning their usual processing.
Also update fstest.TestFS to check for correct validation in custom
Glob implementations.
Fixes#28614.
Change-Id: Ic1d35a4bb9c3565184ae83dbefc425c5c96318e7
Reviewed-on: https://go-review.googlesource.com/c/go/+/264397
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Work stealing is a scalability bottleneck in the scheduler. Since each P
has a work queue, work stealing must look at every P to determine if
there is any work. The number of Ps scales linearly with GOMAXPROCS
(i.e., the number of Ps _is_ GOMAXPROCS), thus this work scales linearly
with GOMAXPROCS.
Work stealing is a later attempt by a P to find work before it goes
idle. Since the P has no work of its own, extra costs here tend not to
directly affect application-level benchmarks. Where they show up is
extra CPU usage by the process as a whole. These costs get particularly
expensive for applications that transition between blocked and running
frequently.
Long term, we need a more scalable approach in general, but for now we
can make a simple observation: idle Ps ([1]) cannot possibly have
anything in their runq, so we need not bother checking at all.
We track idle Ps via a new global bitmap, updated in pidleput/pidleget.
This is already a slow path (requires sched.lock), so we don't expect
high contention there.
Using a single bitmap avoids the need to touch every P to read p.status.
Currently, the bitmap approach is not significantly better than reading
p.status. However, in a future CL I'd like to apply a similiar
optimization to timers. Once done, findrunnable would not touch most Ps
at all (in mostly idle programs), which will avoid memory latency to
pull those Ps into cache.
When reading this bitmap, we are racing with Ps going in and out of
idle, so there are a few cases to consider:
1. _Prunning -> _Pidle: Running P goes idle after we check the bitmap.
In this case, we will try to steal (and find nothing) so there is no
harm.
2. _Pidle -> _Prunning while spinning: A P that starts running may queue
new work that we miss. This is OK: (a) that P cannot go back to sleep
without completing its work, and (b) more fundamentally, we will recheck
after we drop our P.
3. _Pidle -> _Prunning after spinning: After spinning, we really can
miss work from a newly woken P. (a) above still applies here as well,
but this is also the same delicate dance case described in findrunnable:
if nothing is spinning anymore, the other P will unpark a thread to run
the work it submits.
Benchmark results from WakeupParallel/syscall/pair/race/1ms (see
golang.org/cl/228577):
name old msec new msec delta
Perf-task-clock-8 250 ± 1% 247 ± 4% ~ (p=0.690 n=5+5)
Perf-task-clock-16 258 ± 2% 259 ± 2% ~ (p=0.841 n=5+5)
Perf-task-clock-32 284 ± 2% 270 ± 4% -4.94% (p=0.032 n=5+5)
Perf-task-clock-64 326 ± 3% 303 ± 2% -6.92% (p=0.008 n=5+5)
Perf-task-clock-128 407 ± 2% 363 ± 5% -10.69% (p=0.008 n=5+5)
Perf-task-clock-256 561 ± 1% 481 ± 1% -14.20% (p=0.016 n=4+5)
Perf-task-clock-512 840 ± 5% 683 ± 2% -18.70% (p=0.008 n=5+5)
Perf-task-clock-1024 1.38k ±14% 1.07k ± 2% -21.85% (p=0.008 n=5+5)
[1] "Idle Ps" here refers to _Pidle Ps in the sched.pidle list. In other
contexts, Ps may temporarily transition through _Pidle (e.g., in
handoffp); those Ps may have work.
Updates #28808
Updates #18237
Change-Id: Ieeb958bd72e7d8fb375b0b1f414e8d7378b14e29
Reviewed-on: https://go-review.googlesource.com/c/go/+/259578
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Trust: Michael Pratt <mpratt@google.com>
These are identical to And8 and Or8, just using ANDL/ORL instead of
ANDB/ORB.
Change-Id: I99cf90a8b0b5f211fb23325dddd55821875f0c8f
Reviewed-on: https://go-review.googlesource.com/c/go/+/263140
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Michael Pratt <mpratt@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
These will be used in a following CL to perform larger bit clear and bit
set than And8/Or8.
Change-Id: I60f7b1099e29b69eb64add77564faee862880a8d
Reviewed-on: https://go-review.googlesource.com/c/go/+/260977
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Trust: Michael Pratt <mpratt@google.com>
This commit contains the compiler support for //go:embed lines.
The go command passes to the compiler an "embed config"
that maps literal patterns like *.txt to the set of files to embed.
The compiler then lays out the content of those files as static data
in the form of an embed.Files or string or []byte in the final object file.
The test for this code is the end-to-end test hooking up the
embed, cmd/compile, and cmd/go changes, in the next CL.
For #41191.
Change-Id: I916e57f8cc65871dc0044c13d3f90c252a3fe1bf
Reviewed-on: https://go-review.googlesource.com/c/go/+/243944
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
embed.FS is the implementation of embedded file trees, providing
an fs.FS for each embed.FS variable.
Tests are in a follow-up CL, in the package embed/internal/embedtest.
(They can only be written once the toolchain can initialize one of these,
which requires changes to cmd/compile and cmd/go.)
For #41191.
Change-Id: Ieb0ead1d305cdac3d5d4e11772dca75740a72730
Reviewed-on: https://go-review.googlesource.com/c/go/+/243942
Trust: Russ Cox <rsc@golang.org>
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
This is a belated early sync for 1.16 dev cycle
For #36905
Change-Id: I387528ae897794841c0c78b0f0910fc5ce8599ab
Reviewed-on: https://go-review.googlesource.com/c/go/+/260538
Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Hyang-Ah Hana Kim <hyangah@gmail.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Change-Id: I89c61e444b3ab36f0081a5252d210cb265344122
Reviewed-on: https://go-review.googlesource.com/c/go/+/264157
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Trust: Alex Brainman <alex.brainman@gmail.com>
Disable default symbol auto-export behaviour by marking exported
function with the __declspec(dllexport) attribute. Old behaviour can
still be used by setting -extldflags=-Wl,--export-all-symbols.
See https://sourceware.org/binutils/docs/ld/WIN32.html for more info.
This change cuts 50kb of a "hello world" dll.
Updates #6853Fixes#30674
Change-Id: I9c7fb09c677cc760f24d0f7d199740ae73981413
Reviewed-on: https://go-review.googlesource.com/c/go/+/262797
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Trust: Alex Brainman <alex.brainman@gmail.com>
This is somewhat academic (and no tests failed before this commit),
since func atof64 only calls func eiselLemire when func atof64exact
fails, and func atof64exact doesn't fail when parsing positive or
negative zeroes. But it's still worth fixing.
Change-Id: Ibe6ef4c8fd96827673b711d5456003fbc447e39c
Reviewed-on: https://go-review.googlesource.com/c/go/+/264140
Trust: Nigel Tao <nigeltao@golang.org>
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
In https://golang.org/cl/263357, I wasn't thinking that the assembly
file without a GOARCH suffix would be built for all architectures. Only
build assembly for amd64, and update the stderr matching line.
I manually verified that this works on 386; since the only Go file in
that package is a stub, and no assembly files match GOARCH=386, no
assembly is built at all.
Change-Id: Ief3c6c9bdc223f342821b0ec27f00098fc25246a
Reviewed-on: https://go-review.googlesource.com/c/go/+/264457
Trust: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Use sym.Size, instead of len(sym.P), to decide whether a
content-addressable symbol is "short" and hashed as Hashed64.
So we don't dedup a small symbol with a gigantic almost-zero
symbol.
Fixes#42140.
Change-Id: Ic65869e1eaf51947517b3ece49c8b0be1b94bb75
Reviewed-on: https://go-review.googlesource.com/c/go/+/264337
Trust: Cherry Zhang <cherryyz@google.com>
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Than McIntosh <thanm@google.com>
The Go toolchain has supported the simulator for years, but always in
buildmode=c-archive which is intrinsically externally linked and PIE.
This CL moves that support from GOOS=darwin GOARCH=amd64 -tags=ios to
just GOOS=ios GOARCH=amd64 to match the change for iOS devices.
This change also forces external linking and defaults to buildmode=pie
to support Go binaries in the default buildmode to run on the simulator.
CL 255257 added the necessary support to the exec wrapper.
Updates #38485Fixes#42100
Change-Id: I6e6ee0e8d421be53b31e3d403880e5b9b880d031
Reviewed-on: https://go-review.googlesource.com/c/go/+/263798
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Trust: Elias Naur <mail@eliasnaur.com>
