Windows: putting spaces where they don't belong since Windows NT 3.1.
Fixes#14002.
Change-Id: I48ba8a7bfe3f27f83c8aa8355a8d355933d6c5df
Reviewed-on: https://go-review.googlesource.com/18855
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Also don't nil out the Request or Response Body on error. Just leave
it in its previous broken state. The docs now say it's undefined, but
it always was.
Fixes#14036
Change-Id: I7fe175a36cbc01b4158f4dffacd8733b2ffa9999
Reviewed-on: https://go-review.googlesource.com/18726
Reviewed-by: Rob Pike <r@golang.org>
The TestInterfaceAddrsWithNetsh Windows unit test parses and compares the
output of the "netsh" command against more low level Windows API calls. In
at least two cases, some quirks of netsh cause these comparisons to fail.
One example appears to be wi-fi adapters. After a reboot, before it has
been allowed to connect to a network, netsh for IPv4 will not show an
address, whereas netsh for IPv6 will. If the interface is allowed to
connect, and then disconnected, netsh for IPv4 now shows an address and
the test will pass.
The fix is to not compare netsh output if the interface is down.
A related issue is that the IPv6 version of "netsh" can return an
IPv4-embedded IPv6 address where the IPv4 component of the address
is in decimal form, whilst the test is expecting hexadecimal form.
For example, output might be:
Address fe80::5efe:192.168.1.7%6 Parameters
...
Whilst this is valid notation, the fix is to recognise this format in the
"netsh" output and re-parse the address into the all-hexadecimal
representation that the test is expecting.
Fixes#13981
Change-Id: Ie8366673f4d43d07bad80d6d5d1d6e33f654b6cc
Reviewed-on: https://go-review.googlesource.com/18711
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
On HTTP redirect, the HTTP client creates a new request and don't copy
over the Cancel channel. This prevents any redirected request from being
cancelled.
Fixes#14053
Change-Id: I467cdd4aadcae8351b6e9733fc582b7985b8b9d3
Reviewed-on: https://go-review.googlesource.com/18810
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
The timeout means that TestSpecialDomainName will not hang if
the DNS server does not respond to the request.
Fixes#13939
Change-Id: I46e30bbd3c11b6c560656134e704331cf6f8af3f
Reviewed-on: https://go-review.googlesource.com/18661
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
No need to say "by default" because there is no alternative and no way
to override. Always HTTP/2.0 is officially spelled HTTP/2 these days.
Fixes#13985 harder
Change-Id: Ib1ec03cec171ca865342b8e7452cd4c707d7b770
Reviewed-on: https://go-review.googlesource.com/18720
Reviewed-by: Rob Pike <r@golang.org>
Fixes#14001
Change-Id: I6f9bc3028345081758d8f537c3aaddb2e254e69e
Reviewed-on: https://go-review.googlesource.com/18708
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If a user starts two HTTP requests when no http2 connection is
available, both end up creating new TCP connections, since the
server's protocol (h1 or h2) isn't yet known. Once it turns out that
the server supports h2, one of the connections is useless. Previously
we kept upgrading both TLS connections to h2 (SETTINGS frame exchange,
etc). Now the unnecessary connections are closed instead, before the
h2 preface/SETTINGS.
Updates x/net/http2 to git rev a8e212f3d for https://golang.org/cl/18675
This CL contains the tests for https://golang.org/cl/18675
Semi-related change noticed while writing the tests: now that we have
TLSNextProto in Go 1.6, which consults the TLS
ConnectionState.NegotiatedProtocol, we have to gurantee that the TLS
handshake has been done before we look at the ConnectionState. So add
that check after the DialTLS hook. (we never documented that users
have to call Handshake, so do it for them, now that it matters)
Updates #13957
Change-Id: I9a70e9d1282fe937ea654d9b1269c984c4e366c0
Reviewed-on: https://go-review.googlesource.com/18676
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Passes with go test -race -count=1000 -name=TestServerValidatesHostHeader now
without hanging.
Fixes#13950
Change-Id: I41c3a555c642595c95c8c52f19a05a4c68e67630
Reviewed-on: https://go-review.googlesource.com/18660
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Updates x/net/http2 to git rev c93a9b4f2a for https://golang.org/cl/18474
Forgot to submit this four days ago.
Change-Id: Id96ab164ec765911c31874cca39b44aa55e80153
Reviewed-on: https://go-review.googlesource.com/18574
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
When the Transport was creating an bound HTTP connection (protocol
unknown initially) and then ends up deciding it doesn't need it, a
goroutine sits around to clean up whatever the result was. That
goroutine made the false assumption that the result was always an
HTTP/1 connection or an error. It may also be an alternate protocol
in which case the *persistConn.conn net.Conn field is nil, and the
alt field is non-nil.
Fixes#13839
Change-Id: Ia4972e5eb1ad53fa00410b3466d4129c753e0871
Reviewed-on: https://go-review.googlesource.com/18573
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change applies the fix for #13564 to Plan 9 and Windows.
Also enables Lookup API test cases on builders.
Updates #13564.
Change-Id: I863f03c7cb6fbe58b3a55223bfa0ac5f9bf9c3df
Reviewed-on: https://go-review.googlesource.com/18559
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Many browsers now support schemeless URLs in the Location headers
and also it is allowed in the draft HTTP/1.1 specification (see
http://stackoverflow.com/q/4831741#comment25926312_4831741), but
Go standard library lacks support for them.
This patch implements schemeless URLs support in http.Redirect().
Since url.Parse() correctly handles schemeless URLs, I've just added
an extra condition to verify URL's Host part in the absoulute/relative
check in the http.Redirect function.
Also I've moved oldpath variable initialization inside the block
of code where it is used.
Change-Id: Ib8a6347816a83e16576f00c4aa13224a89d610b5
Reviewed-on: https://go-review.googlesource.com/14172
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
There are reports of corruption. Let's disable it for now (for Go 1.6,
especially) until we can investigate and fix properly.
Update #13892
Change-Id: I557275e5142fe616e8a4f89c00ffafb830eb3b78
Reviewed-on: https://go-review.googlesource.com/18540
Reviewed-by: Dave Cheney <dave@cheney.net>
Updates http2 to x/net git rev 0e6d34ef942 for https://golang.org/cl/18472
which means we'll get to delete a ton of grpc-go code and just use the
standard library's HTTP client instead.
Also, the comments in this CL aren't entirely accurate it turns out.
RFC 2616 says:
"The Trailer header field can be used to indicate which header fields
are included in a trailer (see section 14.40)."
And 14.40:
" An HTTP/1.1 message SHOULD include a Trailer header field in a
message using chunked transfer-coding with a non-empty trailer. Doing
so allows the recipient to know which header fields to expect in the
trailer.
If no Trailer header field is present, the trailer SHOULD NOT include
any header fields. See section 3.6.1 for restrictions on the use of
trailer fields in a "chunked" transfer-coding."
So it's really a SHOULD more than a MUST.
And gRPC (at least Google's server) doesn't predeclare "grpc-status"
ahead of time in a Trailer Header, so we'll be lenient. We were too
strict anyway. It's also not a concern for the Go client we have a
different place to populate the Trailers, and it won't confuse clients
which aren't looking for them. The ResponseWriter server side is more
complicated (and strict), though, since we don't want to widen the
ResponseWriter interface. So the Go server still requires that you
predeclare Trailers.
Change-Id: Ia2defc11a2469fb8570ecfabb8453537121084eb
Reviewed-on: https://go-review.googlesource.com/18473
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Third time's a charm.
Thanks to Ralph Corderoy for noticing the DEL omission.
Update #11207
Change-Id: I174fd01eaecceae1eb220f2c9136e12d40fbe943
Reviewed-on: https://go-review.googlesource.com/18375
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Ads documentation for both formats of messages accepted by
ReadResponse(). Validity of message should not be altered by
the validation process. On message with unexpected code,
a properly formatted message was not fully read.
Fixes#10230
Change-Id: Ic0b473059a68ab624ce0525e359d0f5d0b8d2117
Reviewed-on: https://go-review.googlesource.com/18172
Reviewed-by: Russ Cox <rsc@golang.org>
Previously it depended on whether we were using the Go resolver or the Cgo resolver.
Fixes#12421.
Change-Id: Ib162e336f30f736d7244e29d96651c3be11fc3cd
Reviewed-on: https://go-review.googlesource.com/18383
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
As Andy Balholm noted in #11207:
"RFC2616 §4.2 says that a header's field-content can consist of *TEXT,
and RFC2616 §2.2 says that TEXT is <any OCTET except CTLs, but
including LWS>, so that would mean that bytes greater than 128 are
allowed."
This is a partial rollback of the strictness from
https://golang.org/cl/11207 (added in the Go 1.6 dev cycle, only
released in Go 1.6beta1)
Fixes#11207
Change-Id: I3a752a7941de100e4803ff16a5d626d5cfec4f03
Reviewed-on: https://go-review.googlesource.com/18374
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Document the three GODEBUG environment variables in the package doc.
Updates the bundled http2 to x/net git rev 415f1917
for https://golang.org/cl/18372.
Fixes#13611
Change-Id: I3116c5d7de70d3d15242d7198f3758b1fb7d94b9
Reviewed-on: https://go-review.googlesource.com/18373
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
I thought there was still work to do in http2 for this, but I guess
not: the work for parsing them is in net/url (used by http2) and the
handling of OPTIONS * is already in net/http serverHandler, also used
by http2.
But keep the tests.
Change-Id: I566dd0a03cf13c9ea8e735c6bd32d2c521ed503b
Reviewed-on: https://go-review.googlesource.com/18368
Reviewed-by: Blake Mizerany <blake.mizerany@gmail.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Update bundled http2 to git rev d1ba260648 (https://golang.org/cl/18288).
Fixes the flaky TestTransportAndServerSharedBodyRace_h2.
Also adds some debugging to TestTransportAndServerSharedBodyRace_h2
which I hope won't ever be necessary again, but I know will be.
Fixes#13556
Change-Id: Ibcf2fc23ec0122dcac8891fdc3bd7f8acddd880e
Reviewed-on: https://go-review.googlesource.com/18289
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
But also cache the previous parsed form and don't reread if the
size and modification time are both unchanged from before.
On systems with stable /etc/hosts this should result in more stat calls
but only a single parsing of /etc/hosts.
On systems with variable /etc/hosts files (like some Docker systems)
this should result in quicker adoption of changes.
Fixes#13340.
Change-Id: Iba93b204be73d6d903cd17c58038a4fcfd0952b9
Reviewed-on: https://go-review.googlesource.com/18258
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Add a couple more cases where we convert random network I/O errors
into errRequestCanceled if the request was forcefully aborted.
It failed ~1/1000 times without -race, or very easily with -race.
(due to -race randomizing some scheduling)
Fixes#11894
Change-Id: Ib1c123ce1eebdd88642da28a5948ca4f30581907
Reviewed-on: https://go-review.googlesource.com/18287
Reviewed-by: Russ Cox <rsc@golang.org>
This shouldn't need to exist in general, but in practice I want something
like this a few times per year.
Change-Id: I9c220e58be44b7726f75d776f714212c570cf8bb
Reviewed-on: https://go-review.googlesource.com/18286
Reviewed-by: Russ Cox <rsc@golang.org>
Adds a test that both http1 and http2's Transport send a default
User-Agent, with the same behavior.
Updates bundled http2 to golang.org/x/net git rev 1ade16a545 (for
https://go-review.googlesource.com/18285)
The http1 behavior changes slightly: if req.Header["User-Agent"] is
defined at all, even if it's nil or a zero-length slice, then the
User-Agent header is omitted. This is a slight behavior change for
http1, but is consistent with how http1 & http2 do optional headers
elsewhere (such as "Date", "Content-Type"). The old behavior (set it
explicitly to "", aka []string{""}) still works as before. And now
there are even tests.
Fixes#13685
Change-Id: I5786a6913b560de4a5f1f90e595fe320ff567adf
Reviewed-on: https://go-review.googlesource.com/18284
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This was supposed to be in CL 18205 but I submitted via the web
instead of from my computer, so it got lost.
May deflake some things.
Change-Id: I880fb74b5943b8a17f952a82639c60126701187a
Reviewed-on: https://go-review.googlesource.com/18259
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Mention that:
- connection pooling is enabled by default,
- the Transport is safe for concurrent use, and
- the Client type should be used for high-level stuff.
Change-Id: Idfd8cc852e733c44211e77cf0e22720b1fdca39b
Reviewed-on: https://go-review.googlesource.com/18273
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Update net/http's copy of http2 (sync as of x/net git rev 961116aee,
aka https://golang.org/cl/18266)
Also adds some CONNECT tests for #13717 (mostly a copy of http2's
version of test, but in the main repo it also tests that http1 behaves
the same)
Fixes#13668Fixes#13717
Change-Id: I7db93fe0b7c42bd17a43ef32953f2d20620dd3ea
Reviewed-on: https://go-review.googlesource.com/18269
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
In the beginning, there was no way to cancel an HTTP request.
We later added Transport.CancelRequest to cancel an in-flight HTTP
request by breaking its underlying TCP connection, but it was hard to
use correctly and didn't work in all cases. And its error messages
were terrible. Some of those issues were fixed over time, but the most
unfixable problem was that it didn't compose well. All RoundTripper
implementations had to choose to whether to implement CancelRequest
and both decisions had negative consequences.
In Go 1.5 we added Request.Cancel, which composed well, worked in all
phases, had nice error messages, etc. But we forgot to use it in the
implementation of Client.Timeout (a timeout which spans multiple
requests and reading request bodies).
In Go 1.6 (upcoming), we added HTTP/2 support, but now Client.Timeout
didn't work because the http2.Transport didn't have a CancelRequest
method.
Rather than add a CancelRequest method to http2, officially deprecate
it and update the only caller (Client, for Client.Cancel) to use
Request.Cancel instead.
The http2 Client timeout tests are enabled now.
For compatibility, we still use CancelRequest in Client if we don't
recognize the RoundTripper type. But documentation has been updated to
tell people that CancelRequest is deprecated.
Fixes#13540
Change-Id: I15546b90825bb8b54905e17563eca55ea2642075
Reviewed-on: https://go-review.googlesource.com/18260
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In debugging the flaky test in #13825, I discovered that my previous
change to tighten and simplify the communication protocol between
Transport.roundTrip and persistConn.readLoop in
https://golang.org/cl/17890 wasn't complete.
This change simplifies it further: the buffered-vs-unbuffered
complexity goes away, and we no longer need to re-try channel reads in
the select case. It was trying to prioritize channels in the case that
two were readable in the select. (it was only failing in the race builder
because the race builds randomize select scheduling)
The problem was that in the bodyless response case we had to return
the idle connection before replying to roundTrip. But putIdleConn
previously both added it to the free list (which we wanted), but also
closed the connection, which made the caller goroutine
(Transport.roundTrip) have two readable cases: pc.closech, and the
response. We guarded against similar conditions in the caller's select
for two readable channels, but such a fix wasn't possible here, and would
be overly complicated.
Instead, switch to unbuffered channels. The unbuffered channels were only
to prevent goroutine leaks, so address that differently: add a "callerGone"
channel closed by the caller on exit, and select on that during any unbuffered
sends.
As part of the fix, split putIdleConn into two halves: a part that
just returns to the freelist, and a part that also closes. Update the
four callers to the variants each wanted.
Incidentally, the connections were closing on return to the pool due
to MaxIdleConnsPerHost (somewhat related: #13801), but this bug
could've manifested for plenty of other reasons.
Fixes#13825
Change-Id: I6fa7136e2c52909d57a22ea4b74d0155fdf0e6fa
Reviewed-on: https://go-review.googlesource.com/18282
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
The CloseNotifier implementation and documentation was
substantially changed in https://golang.org/cl/17750 but it was a bit
too aggressive.
Issue #13666 highlighted that in addition to breaking external
projects, even the standard library (httputil.ReverseProxy) didn't
obey the new rules about not using CloseNotifier until the
Request.Body is fully consumed.
So, instead of fixing httputil.ReverseProxy, dial back the rules a
bit. It's now okay to call CloseNotify before consuming the request
body. The docs now say CloseNotifier may wait to fire before the
request body is fully consumed, but doesn't say that the behavior is
undefined anymore. Instead, we just wait until the request body is
consumed and start watching for EOF from the client then.
This CL also adds a test to ReverseProxy (using a POST request) that
would've caught this earlier.
Fixes#13666
Change-Id: Ib4e8c29c4bfbe7511f591cf9ffcda23a0f0b1269
Reviewed-on: https://go-review.googlesource.com/18144
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
https://golang.org/cl/18087 added a bunch of t.Parallel calls, which
aren't compatible with the afterTest func. But in short mode, afterTest
is a no-op. To keep all.bash (short mode) fast, conditionally set
t.Parallel when in short mode, but keep it unset for compatibility with
afterFunc otherwise.
Fixes#13804
Change-Id: Ie841fbc2544e1ffbee43ba1afbe895774e290da0
Reviewed-on: https://go-review.googlesource.com/18143
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Takes 3% off my all.bash run time.
For #10571.
Change-Id: I8f00f523d6919e87182d35722a669b0b96b8218b
Reviewed-on: https://go-review.googlesource.com/18087
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change replaces the existing log format separated by commas and
spaces with space-separated one.
Change-Id: I9a4b38669025430190c9a1a6b5c82b862866559d
Reviewed-on: https://go-review.googlesource.com/17999
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In general the package net deals IPv4 addresses as IPv6 IPv4-mapped
addresses internally for the dual stack era, when we need to support
various techniques on IPv4/IPv6 translation.
This change makes windows implementation follow the same pattern which
BSD variants and Linux do.
Updates #13544.
Also fixes an unintentionally formatted line by accident by gofmt.
Change-Id: I4953796e751fd8050c73094468a0d7b0d33f5516
Reviewed-on: https://go-review.googlesource.com/17992
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Copy the same sentence from Transport.TLSNextProto.
Change-Id: Ib67bf054e891a68be8ba466a8c52968363374d16
Reviewed-on: https://go-review.googlesource.com/18031
Reviewed-by: Russ Cox <rsc@golang.org>
Update docs on ResponseWriter and Handler around concurrency.
Also add a test.
The Handler docs were old and used "object" a lot. It was also too
ServeMux-centric.
Fixes#13050
Updates #13659 (new issue found in http2 while writing the test)
Change-Id: I25f53d5fa54f1c9d579d3d0f191bf3d94b1a251b
Reviewed-on: https://go-review.googlesource.com/17982
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Patch from Russ.
No bug identified, but I didn't search exhaustively. The new code is
easier to read.
Fixes#13621
Change-Id: Ifda936e4101116fa254ead950b5fe06adb14e977
Reviewed-on: https://go-review.googlesource.com/17981
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
This updates the bundled copy of x/net/http2 to git rev d2ecd08
for https://golang.org/cl/17912 (http2: send client trailers)
and enables the final Trailer test for http2.
Fixes#13557
Change-Id: Iaa15552b82bf7a2cb01b7787a2e1ec5ee680a9d3
Reviewed-on: https://go-review.googlesource.com/17935
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Also include test for interface state (up or down).
Updates #13606
Change-Id: I03538d65525ddd9c2d0254761861c2df7fc5bd5a
Reviewed-on: https://go-review.googlesource.com/17850
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
Run-TryBot: Russ Cox <rsc@golang.org>
Document that ListenAndServe and ListenAndServeTLS also set TCP
keep-alives.
Fixes#12748
Change-Id: Iba2e8a58dd657eba326db49a6c872e2d972883a4
Reviewed-on: https://go-review.googlesource.com/17681
Reviewed-by: Russ Cox <rsc@golang.org>
With certain names and search domain configurations the
returned error would be one encountered while querying a
generated name instead of the original name. This caused
confusion when a manual check of the same name produced
different results.
Now prefer errors encountered for the original name.
Also makes the low-level DNS connection plumbing swappable
in tests enabling tighter control over responses without
relying on the network.
Fixes#12712
Updates #13295
Change-Id: I780d628a762006bb11899caf20b5f97b462a717f
Reviewed-on: https://go-review.googlesource.com/16953
Reviewed-by: Russ Cox <rsc@golang.org>
I updated this in the previous commit (https://golang.org/cl/17931)
but noticed a typo. and it still wasn't great.
The Go 1.5 text was too brief to know how to use it:
// Trailer maps trailer keys to values, in the same
// format as the header.
Change-Id: I33c49b6a4a7a3596735a4cc7865ad625809da900
Reviewed-on: https://go-review.googlesource.com/17932
Reviewed-by: Russ Cox <rsc@golang.org>
This CL updates the bundled copy of x/net/http2 to include
https://golang.org/cl/17930 and enables the previously-skipped tests
TestTrailersServerToClient_h2 and TestTrailersServerToClient_Flush_h2.
It also updates the docs on http.Response.Trailer to describe how to
use it. No change in rules. Just documenting the old unwritten rules.
(there were tests locking in the behavior, and misc docs and examples
scattered about, but not on http.Response.Trailer itself)
Updates #13557
Change-Id: I6261d439f6c0d17654a1a7928790e8ffed16df6c
Reviewed-on: https://go-review.googlesource.com/17931
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Blake Mizerany <blake.mizerany@gmail.com>
CL 17821 used syscall.CancelIoEx to cancel outstanding connect
call, but did not check for syscall.CancelIoEx return value.
Also I am worried about introducing race here. We should use
proper tools available for us instead. For example, we could
use fd.setWriteDeadline just like unix version does. Do that.
Change-Id: Idb9a03c8c249278ce3e2a4c49cc32445d4c7b065
Reviewed-on: https://go-review.googlesource.com/17920
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
The old test was in client_test.go but was a mix of four things:
- clients writing trailers
- servers reading trailers
- servers writing trailers
- clients reading trailers
It definitely wasn't just about clients.
This moves it into clientserver_test.go and separates it into two
halves:
- servers writing trailers + clients reading trailers
- clients writing trailers + servers reading trailers
Which still isn't ideal, but is much better, and easier to read.
Updates #13557
Change-Id: I8c3e58a1f974c1b10bb11ef9b588cfa0f73ff5d9
Reviewed-on: https://go-review.googlesource.com/17895
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Blake Mizerany <blake.mizerany@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The Transport had a delicate protocol between its readLoop goroutine
and the goroutine calling RoundTrip. The basic concern is that the
caller's RoundTrip goroutine wants to wait for either a
connection-level error (the conn dying) or the response. But sometimes
both happen: there's a valid response (without a body), but the conn
is also going away. Both goroutines' logic dealing with this had grown
large and complicated with hard-to-follow comments over the years.
Simplify and document. Pull some bits into functions and do all
bodyless stuff in one place (it's special enough), rather than having
a bunch of conditionals scattered everywhere. One test is no longer
even applicable since the race it tested is no longer possible (the
code doesn't exist).
The bug that this fixes is that when the Transport reads a bodyless
response from a server, it was returning that response before
returning the persistent connection to the idle pool. As a result,
~1/1000 of serial requests would end up creating a new connection
rather than re-using the just-used connection due to goroutine
scheduling chance. Instead, this now adds bodyless responses'
connections back to the idle pool first, then sends the response to
the RoundTrip goroutine, but making sure that the RoundTrip goroutine
is outside of its select on the connection dying.
There's a new buffered channel involved now, which is a minor
complication, but it's much more self-contained and well-documented
than the previous complexity. (The alternative of making the
responseAndError channel itself unbuffered is too invasive and risky
at this point; it would require a number of changes to avoid
deadlocked goroutines in error cases)
In any case, flakes look to be gone now. We'll see if trybots agree.
Fixes#13633
Change-Id: I95a22942b2aa334ae7c87331fddd751d4cdfdffc
Reviewed-on: https://go-review.googlesource.com/17890
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
This might deflake it. Or it'll at least give us more debugging clues.
Fixes#13626 maybe
Change-Id: Ie8cd0375d60dad033ec6a64830a90e7b9152a3d9
Reviewed-on: https://go-review.googlesource.com/17825
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
CloseNotifier wasn't well specified previously. This CL simplifies its
implementation, clarifies the public documentation on CloseNotifier,
clarifies internal documentation on conn, and fixes two CloseNotifier
bugs in the process.
The main change, though, is tightening the rules and expectations for using
CloseNotifier:
* the caller must consume the Request.Body first (old rule, unwritten)
* the received value is the "true" value (old rule, unwritten)
* no promises for channel sends after Handler returns (old rule, unwritten)
* a subsequent pipelined request fires the CloseNotifier (new behavior;
previously it never fired and thus effectively deadlocked as in #13165)
* advise that it should only be used without HTTP/1.1 pipelining (use HTTP/2
or non-idempotent browsers). Not that browsers actually use pipelining.
The main implementation change is that each Handler now gets its own
CloseNotifier channel value, rather than sharing one between the whole
conn. This means Handlers can't affect subsequent requests. This is
how HTTP/2's Server works too. The old docs never clarified a behavior
either way. The other side effect of each request getting its own
CloseNotifier channel is that one handler can't "poison" the
underlying conn preventing subsequent requests on the same connection
from using CloseNotifier (this is #9763).
In the old implementation, once any request on a connection used
ClosedNotifier, the conn's underlying bufio.Reader source was switched
from the TCPConn to the read side of the pipe being fed by a
never-ending copy. Since it was impossible to abort that never-ending
copy, we could never get back to a fresh state where it was possible
to return the underlying TCPConn to callers of Hijack. Now, instead of
a never-ending Copy, the background goroutine doing a Read from the
TCPConn (or *tls.Conn) only reads a single byte. That single byte
can be in the request body, a socket timeout error, io.EOF error, or
the first byte of the second body. In any case, the new *connReader
type stitches sync and async reads together like an io.MultiReader. To
clarify the flow of Read data and combat the complexity of too many
wrapper Reader types, the *connReader absorbs the io.LimitReader
previously used for bounding request header reads. The
liveSwitchReader type is removed. (an unused switchWriter type is also
removed)
Many fields on *conn are also documented more fully.
Fixes#9763 (CloseNotify + Hijack together)
Fixes#13165 (deadlock with CloseNotify + pipelined requests)
Change-Id: I40abc0a1992d05b294d627d1838c33cbccb9dd65
Reviewed-on: https://go-review.googlesource.com/17750
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Updates bundled copy of x/net/http2 to include
https://golang.org/cl/17823 (catching panics in Handlers)
Fixes#13555
Change-Id: I08e4e38e736a8d93f5ec200e8041c143fc6eafce
Reviewed-on: https://go-review.googlesource.com/17824
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL also updates the bundled http2 package with the h2 fix from
https://golang.org/cl/17757Fixes#13159
Change-Id: If0e3b4bd04d0dceed67d1b416ed838c9f1961576
Reviewed-on: https://go-review.googlesource.com/17758
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
