CL 135377 introduces pass strings and slices to convT2{E,I} by value.
Before that CL, all types, except interface will be allocated temporary
address. The CL changes the logic that only constant and type which
needs address (determine by convFuncName) will be allocated.
It fails to cover the case where type is static composite literal.
Adding condition to check that case fixes the issue.
Also, static composite literal node implies constant type, so consttype
checking can be removed.
Fixes#30956
Change-Id: Ifc750a029fb4889c2d06e73e44bf85e6ef4ce881
Reviewed-on: https://go-review.googlesource.com/c/go/+/168858
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Some special-case code paths in order.go didn't expect OCALLFUNC to
have Ninit; in particular, OAS2FUNC and ODEFER/OGO failed to call
o.init on their child OCALLFUNC node. This resulted in not all of the
AST being properly ordered.
This was noticed because order is responsible for introducing an
invariant around how OAPPEND is used, which is enforced by walk.
However, there were perhaps simpler cases (e.g., simple order of
evaluation) that were being silently miscompiled.
Fixes#31010.
Change-Id: Ib928890ab5ec2aebd8e30a030bc2b404387f9123
Reviewed-on: https://go-review.googlesource.com/c/go/+/169257
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
New test case designed to mimic the code in issue 30908, which
features duplicate but non-indentical DWARF abstract subprogram DIEs.
Updates #30908.
Change-Id: Iacb4b53e6a988e46c801cdac236cef883c553f8f
Reviewed-on: https://go-review.googlesource.com/c/go/+/168957
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: David Chase <drchase@google.com>
For "rundir" tests, allow users to add in linker flags as well as
compiler flags, e.g.
// rundir -m -ldflags -w
The directive above will pass "-m" to the compiler on each package compilation
and "-w" to the linker for the final link.
In addition, if "-P" is specified with 'rundir', then for each compile
pass in "-p <X>" to set the packagepath explicitly, which is closer to
how the compiler is run by 'go build'.
Change-Id: I04720011a89d1bd8dcb4f2ccb4af1d74f6a01da1
Reviewed-on: https://go-review.googlesource.com/c/go/+/168977
Reviewed-by: Cherry Zhang <cherryyz@google.com>
It is possible that a "volatile" value (one that can be clobbered
by preparing args of a call) to be used in multiple write barrier
calls. We used to copy the volatile value right before each call.
But this doesn't work if the value is used the second time, after
the first call where it is already clobbered. Copy it before
emitting any call.
Fixes#30977.
Change-Id: Iedcc91ad848d5ded547bf37a8359c125d32e994c
Reviewed-on: https://go-review.googlesource.com/c/go/+/168677
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This CL instrinsifies Add64 with arm64 instruction sequence ADDS, ADCS
and ADC, and optimzes the case of carry chains.The CL also changes the
test code so that the intrinsic implementation can be tested.
Benchmarks:
name old time/op new time/op delta
Add-224 2.500000ns +- 0% 2.090000ns +- 4% -16.40% (p=0.000 n=9+10)
Add32-224 2.500000ns +- 0% 2.500000ns +- 0% ~ (all equal)
Add64-224 2.500000ns +- 0% 1.577778ns +- 2% -36.89% (p=0.000 n=10+9)
Add64multiple-224 6.000000ns +- 0% 2.000000ns +- 0% -66.67% (p=0.000 n=10+10)
Change-Id: I6ee91c9a85c16cc72ade5fd94868c579f16c7615
Reviewed-on: https://go-review.googlesource.com/c/go/+/159017
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
'SUBQ $-0x80, r' is shorter to encode than 'ADDQ $0x80, r',
and functionally equivalent. Use it instead.
Shaves off a few bytes here and there:
file before after Δ %
compile 25935856 25927664 -8192 -0.032%
nm 4251840 4247744 -4096 -0.096%
Change-Id: Ia9e02ea38cbded6a52a613b92e3a914f878d931e
Reviewed-on: https://go-review.googlesource.com/c/go/+/168344
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When initializing a new object, we're often writing
1) to a location that doesn't have a pointer to a heap object
2) a pointer that doesn't point to a heap object
When both those conditions are true, we can avoid the write barrier.
This CL detects case 1 by looking for writes to known-zeroed
locations. The results of runtime.newobject are zeroed, and we
perform a simple tracking of which parts of that object are written so
we can determine what part remains zero at each write.
This CL detects case 2 by looking for addresses of globals (including
the types and itabs which are used in interfaces) and for nil pointers.
Makes cmd/go 0.3% smaller. Some particular cases, like the slice
literal in #29573, can get much smaller.
TODO: we can remove actual zero writes also with this mechanism.
Update #29573
Change-Id: Ie74a3533775ea88da0495ba02458391e5db26cb9
Reviewed-on: https://go-review.googlesource.com/c/go/+/156363
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The name change init -> init.ializers was initially required for
initialization code.
With CL 161337 there's no wrapper code any more, there's a data
structure instead (named .inittask). So we can go back to just
plain init appearing in tracebacks.
RELNOTE=yes
Update #29919. Followon to CL 161337.
Change-Id: I5a4a49d286df24b53b2baa193dfda482f3ea82a5
Reviewed-on: https://go-review.googlesource.com/c/go/+/167780
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Instead of writing an init function per package that does the same
thing for every package, just write that implementation once in the
runtime. Change the compiler to generate a data structure that encodes
the required initialization operations.
Reduces cmd/go binary size by 0.3%+. Most of the init code is gone,
including all the corresponding stack map info. The .inittask
structures that replace them are quite a bit smaller.
Most usefully to me, there is no longer an init function in every -S output.
(There is an .inittask global there, but it's much less distracting.)
After this CL we could change the name of the "init.ializers" function
back to just "init".
Update #6853
R=go1.13
Change-Id: Iec82b205cc52fe3ade4d36406933c97dbc9c01b1
Reviewed-on: https://go-review.googlesource.com/c/go/+/161337
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
golang.org/cl/166983 started serializing the Ninit field of OCALL
nodes within function inline bodies (necessary to fix a regression in
building crypto/ecdsa with -gcflags=-l=4), but this means the Ninit
field needs to be typechecked when the imported function body is used.
It's unclear why this wasn't necessary for the crypto/ecdsa
regression.
Fixes#30907.
Change-Id: Id5f0bf3c4d17bbd6d5318913b859093c93a0a20c
Reviewed-on: https://go-review.googlesource.com/c/go/+/168199
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
A few examples (for accessing a slice of length 3):
s[-1] runtime error: index out of range [-1]
s[3] runtime error: index out of range [3] with length 3
s[-1:0] runtime error: slice bounds out of range [-1:]
s[3:0] runtime error: slice bounds out of range [3:0]
s[3:-1] runtime error: slice bounds out of range [:-1]
s[3:4] runtime error: slice bounds out of range [:4] with capacity 3
s[0:3:4] runtime error: slice bounds out of range [::4] with capacity 3
Note that in cases where there are multiple things wrong with the
indexes (e.g. s[3:-1]), we report one of those errors kind of
arbitrarily, currently the rightmost one.
An exhaustive set of examples is in issue30116[u].out in the CL.
The message text has the same prefix as the old message text. That
leads to slightly awkward phrasing but hopefully minimizes the chance
that code depending on the error text will break.
Increases the size of the go binary by 0.5% (amd64). The panic functions
take arguments in registers in order to keep the size of the compiled code
as small as possible.
Fixes#30116
Change-Id: Idb99a827b7888822ca34c240eca87b7e44a04fdd
Reviewed-on: https://go-review.googlesource.com/c/go/+/161477
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This is a re-attempt at CL 153841, which caused two regressions:
1. crypto/ecdsa failed to build with -gcflags=-l=4. This was because
when "t1, t2, ... := g(); f(t1, t2, ...)" was exported, we were losing
the first assignment from the call's Ninit field.
2. net/http/pprof failed to run with -gcflags=-N. This is due to a
conflict with CL 159717: as of that CL, package-scope initialization
statements are executed within the "init.ializer" function, rather
than the "init" function, and the generated temp variables need to be
moved accordingly too.
[Rest of description is as before.]
This CL moves order.go's copyRet logic for rewriting f(g()) into t1,
t2, ... := g(); f(t1, t2, ...) earlier into typecheck. This allows the
rest of the compiler to stop worrying about multi-value functions
appearing outside of OAS2FUNC nodes.
This changes compiler behavior in a few observable ways:
1. Typechecking error messages for builtin functions now use general
case error messages rather than unnecessarily differing ones.
2. Because f(g()) is rewritten before inlining, saved inline bodies
now see the rewritten form too. This could be addressed, but doesn't
seem worthwhile.
3. Most notably, this simplifies escape analysis and fixes a memory
corruption issue in esc.go. See #29197 for details.
Fixes#15992.
Fixes#29197.
Change-Id: I930b10f7e27af68a0944d6c9bfc8707c3fab27a4
Reviewed-on: https://go-review.googlesource.com/c/go/+/166983
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
We know that a & 31 is non-negative for all a, signed or not.
We can avoid checking that and needing to write out an
unreachable call to panicshift.
Change-Id: I32f32fb2c950d2b2b35ac5c0e99b7b2dbd47f917
Reviewed-on: https://go-review.googlesource.com/c/go/+/167499
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
The only ways to construct an OLITERAL node are (1) a basic literal
from the source package, (2) constant folding within evconst (which
only folds Go language constants), (3) the universal "nil" constant,
and (4) implicit conversions of nil to some concrete type.
Passes toolstash-check.
Change-Id: I30fc6b07ebede7adbdfa4ed562436cbb7078a2ff
Reviewed-on: https://go-review.googlesource.com/c/go/+/166981
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
ppc64{,le} processor level selection allows the compiler to generate instructions
targeting newer processors and processor-specific optimizations without breaking
compatibility with our current baseline. This feature introduces a new environment
variable, GOPPC64.
GOPPC64 is a GOARCH=ppc64{,le} specific option, for a choice between different
processor levels (i.e. Instruction Set Architecture versions) for which the
compiler will target. The default is 'power8'.
Change-Id: Ic152e283ae1c47084ece4346fa002a3eabb3bb9e
Reviewed-on: https://go-review.googlesource.com/c/go/+/163758
Run-TryBot: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This test invokes 'go build', so in module mode it needs a module
cache to guard edits to go.mod.
Fixes#30776
Change-Id: I89ebef1fad718247e7f972cd830e31d6f4a83e4c
Reviewed-on: https://go-review.googlesource.com/c/go/+/167085
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The CL 164718 adds new condition flags for floating-point comparisons
in arm64 backend, but dose not add the handling in rewrite.go for
corresponding Ops, which causes issue 30679. And this CL fixes this
issue.
Fixes#30679
Change-Id: I8acc749f78227c3e9e74fa7938f05fb442fb62c6
Reviewed-on: https://go-review.googlesource.com/c/go/+/166579
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
New test for issue 30659 (compilation error due to bad
export data).
Updates #30659.
Change-Id: I2541ee3c379e5b22033fea66bb4ebaf720cc5e1f
Reviewed-on: https://go-review.googlesource.com/c/go/+/166917
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Two tests (load_le_byte8_uint64_inv and load_be_byte8_uint64)
pass but the generated code isn't actually correct.
The test regexp provides a false negative, as it matches the
MOVQ (SP), BP instruction in the epilogue.
Combined loads never worked for these cases - the test was added in error
as part of a batch and not noticed because of the above false match.
Normalize the amd64/386 tests to always negative match on narrower
loads and OR.
Change-Id: I256861924774d39db0e65723866c81df5ab5076f
Reviewed-on: https://go-review.googlesource.com/c/go/+/166837
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Using Once.Do is now extremely cheap because the fast path is just an inlined
atomic load of a variable that is written only once and a conditional jump.
This is very beneficial for Once.Do because, due to its nature, the fast path
will be used for every call after the first one.
In a attempt to mimize code size increase, reorder the fields so that the
pointer to Once is also the pointer to Once.done, that is the only field used
in the hot path. This allows to use more compact instruction encodings or less
instructions in the hot path (that is inlined at every callsite).
name old time/op new time/op delta
Once 4.54ns ± 0% 2.06ns ± 0% -54.59% (p=0.000 n=19+16)
Once-4 1.18ns ± 0% 0.55ns ± 0% -53.39% (p=0.000 n=15+16)
Once-16 0.53ns ± 0% 0.17ns ± 0% -67.92% (p=0.000 n=18+17)
linux/amd64 bin/go 14675861 (previous commit 14663387, +12474/+0.09%)
Change-Id: Ie2708103ab473787875d66746d2f20f1d90a6916
Reviewed-on: https://go-review.googlesource.com/c/go/+/152697
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Turns out this makes the fix for 28797 unnecessary, because this order
ensures that the RHS of IsSliceInBounds ops are always nonnegative.
The real reason for this change is that it also makes dealing with
<0 values easier for reporting values in bounds check panics (issue #30116).
Makes cmd/go negligibly smaller.
Update #28797
Change-Id: I1f25ba6d2b3b3d4a72df3105828aa0a4b629ce85
Reviewed-on: https://go-review.googlesource.com/c/go/+/166377
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Current compiler reverses operands to work around NaN in
"less than" and "less equal than" comparisons. But if we
want to use "FCMPD/FCMPS $(0.0), Fn" to do some optimization,
the workaround way does not work. Because assembler does
not support instruction "FCMPD/FCMPS Fn, $(0.0)".
This CL sets condition flags for floating-point comparisons
to resolve this problem.
Change-Id: Ia48076a1da95da64596d6e68304018cb301ebe33
Reviewed-on: https://go-review.googlesource.com/c/go/+/164718
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Update the test in test/heapsampling.go to more thoroughly validate heap sampling.
Lower the sampling rate on the test to ensure allocations both smaller and
larger than the sampling rate are tested.
Tighten up the validation check to a 10% difference between the unsampled and correct value.
Because of the nature of random sampling, it is possible that the unsampled value fluctuates
over that range. To avoid flakes, run the experiment three times and only report an issue if the
same location consistently falls out of range on all experiments.
This tests the sampling fix in cl/158337.
Change-Id: I54a709e5c75827b8b1c2d87cdfb425ab09759677
GitHub-Last-Rev: 7c04f12603
GitHub-Pull-Request: golang/go#26944
Reviewed-on: https://go-review.googlesource.com/c/go/+/129117
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This CL adds two rules to turn patterns like ((x<<8) | (x>>8)) (the type of
x is uint16, "|" can also be "+" or "^") to a REV16 instruction on arm v6+.
This optimization rule can be used for math/bits.ReverseBytes16.
Benchmarks on arm v6:
name old time/op new time/op delta
ReverseBytes-32 2.86ns ± 0% 2.86ns ± 0% ~ (all equal)
ReverseBytes16-32 2.86ns ± 0% 2.86ns ± 0% ~ (all equal)
ReverseBytes32-32 1.29ns ± 0% 1.29ns ± 0% ~ (all equal)
ReverseBytes64-32 1.43ns ± 0% 1.43ns ± 0% ~ (all equal)
Change-Id: I819e633c9a9d308f8e476fb0c82d73fb73dd019f
Reviewed-on: https://go-review.googlesource.com/c/go/+/159019
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
First the insidious bug:
var n uintptr
for n := elemPtrs; n > 120; n -= 120 {
prog = append(prog, 120)
prog = append(prog, mask[:15]...)
mask = mask[15:]
}
prog = append(prog, byte(n))
prog = append(prog, mask[:(n+7)/8]...)
The := breaks this code, because the n after the loop is always 0!
We also do need to handle field padding correctly. In particular
the old padding code doesn't correctly handle fields that are not
a multiple of a pointer in size.
Fixes#30606.
Change-Id: Ifcab9494dc25c20116753c5d7e0145d6c2053ed8
Reviewed-on: https://go-review.googlesource.com/c/go/+/165860
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
They are missing a stop byte at the end.
Normally this doesn't matter, but when including a GC program
in another GC program, we strip the last byte. If that last byte
wasn't a stop byte, then we've thrown away part of the program
we actually need.
Fixes#30606
Change-Id: Ie9604beeb84f7f9442e77d31fe64c374ca132cce
Reviewed-on: https://go-review.googlesource.com/c/go/+/165857
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Make sure the side effects inside short-circuited operations (&& and ||)
happen correctly.
Before this CL, we attached the side effects to the node itself using
exprInPlace. That caused other side effects in sibling expressions
to get reordered with respect to the short circuit side effect.
Instead, rewrite a && b like:
r := a
if r {
r = b
}
That code we can keep correctly ordered with respect to other
side-effects extracted from part of a big expression.
exprInPlace seems generally unsafe. But this was the only case where
exprInPlace is called not at the top level of an expression, so I
don't think the other uses can actually trigger an issue (there can't
be a sibling expression). TODO: maybe those cases don't need "in
place", and we can retire that function generally.
This CL needed a small tweak to the SSA generation of OIF so that the
short circuit optimization still triggers. The short circuit optimization
looks for triangle but not diamonds, so don't bother allocating a block
if it will be empty.
Go 1 benchmarks are in the noise.
Fixes#30566
Change-Id: I19c04296bea63cbd6ad05f87a63b005029123610
Reviewed-on: https://go-review.googlesource.com/c/go/+/165617
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
cmd/dist executes 'go test' within this directory, so it needs a
go.mod file to tell the compiler what package path to use in
diagnostic and debug information.
Updates #30228
Change-Id: Ia313ac06bc0ec4631d415faa20c56cce2ac8dbc5
Reviewed-on: https://go-review.googlesource.com/c/go/+/165498
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Fix builder breakage from CL 148958.
This is an inlining test that should be skipped on -N -l.
The inlining also doesn't happen on arm and wasm, so skip the test
there too.
Fixes the noopt builder, the linux-arm builder, and the wasm builder.
Updates #30605
Change-Id: I06b90d595be7185df61db039dd225dc90d6f678f
Reviewed-on: https://go-review.googlesource.com/c/go/+/165339
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Currently, runtime.KeepAlive applied on a stack object doesn't
actually keeps the stack object alive, and the heap object
referenced from it could be collected. This is because the
address of the stack object is rematerializeable, and we just
ignored KeepAlive on rematerializeable values. This CL fixes it.
Fixes#30476.
Change-Id: Ic1f75ee54ed94ea79bd46a8ddcd9e81d01556d1d
Reviewed-on: https://go-review.googlesource.com/c/164537
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This CL moves order.go's copyRet logic for rewriting f(g()) into t1,
t2, ... = g(); f(t1, t2, ...) earlier into typecheck. This allows the
rest of the compiler to stop worrying about multi-value functions
appearing outside of OAS2FUNC nodes.
This changes compiler behavior in a few observable ways:
1. Typechecking error messages for builtin functions now use general
case error messages rather than unnecessarily differing ones.
2. Because f(g()) is rewritten before inlining, saved inline bodies
now see the rewritten form too. This could be addressed, but doesn't
seem worthwhile.
3. Most notably, this simplifies escape analysis and fixes a memory
corruption issue in esc.go. See #29197 for details.
Fixes#15992.
Fixes#29197.
Change-Id: I86a70668301efeec8fbd11fe2d242e359a3ad0af
Reviewed-on: https://go-review.googlesource.com/c/153841
Reviewed-by: Robert Griesemer <gri@golang.org>
isGoConst could spuriously return true for variables that shadow a
constant declaration with the same name.
Because even named constants are always represented by OLITERAL nodes,
the easy fix is to just ignore ONAME nodes in isGoConst. We can
similarly ignore ONONAME nodes.
Confirmed that k8s.io/kubernetes/test/e2e/storage builds again with
this fix.
Fixes#30430.
Change-Id: I899400d749982d341dc248a7cd5a18277c2795ec
Reviewed-on: https://go-review.googlesource.com/c/164319
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
If a type switch case expression has failed typechecking, the case body is
likely to also fail with confusing or spurious errors. Suppress
typechecking the case body when this happens.
Fixes#28926
Change-Id: Idfdb9d5627994f2fd90154af1659e9a92bf692c4
Reviewed-on: https://go-review.googlesource.com/c/158617
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Consistent logic for handling both duplicate map keys and case values,
and eliminates ad hoc value hashing code.
Also makes cmd/compile consistent with go/types's handling of
duplicate constants (see #28085), which is at least an improvement
over the status quo even if we settle on something different for the
spec.
As a side effect, this also suppresses cmd/compile's warnings about
duplicate nils in (non-interface expression) switch statements, which
was technically never allowed by the spec anyway.
Updates #28085.
Updates #28378.
Change-Id: I176a251e770c3c5bc11c2bf8d1d862db8f252a17
Reviewed-on: https://go-review.googlesource.com/c/152544
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
