We need a runtime check because the original issue is encountered
when running cross compiled windows program from linux. It's better
to give a meaningful crash message earlier than to segfault later.
The added test should not impose any measurable overhead to Go
programs.
For #12415.
Change-Id: Ib4a24ef560c09c0585b351d62eefd157b6b7f04c
Reviewed-on: https://go-review.googlesource.com/14207
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The PowerPC ISA does not have a PC-relative load instruction, which poses
obvious challenges when generating position-independent code. The way the ELFv2
ABI addresses this is to specify that r2 points to a per "module" (shared
library or executable) TOC pointer. Maintaining this pointer requires
cooperation between codegen and the system linker:
* Non-leaf functions leave space on the stack at r1+24 to save the TOC pointer.
* A call to a function that *might* have to go via a PLT stub must be followed
by a nop instruction that the system linker can replace with "ld r1, 24(r1)"
to restore the TOC pointer (only when dynamically linking Go code).
* When calling a function via a function pointer, the address of the function
must be in r12, and the first couple of instructions (the "global entry
point") of the called function use this to derive the address of the TOC
for the module it is in.
* When calling a function that is implemented in the same module, the system
linker adjusts the call to skip over the instructions mentioned above (the
"local entry point"), assuming that r2 is already correctly set.
So this changeset adds the global entry point instructions, sets the metadata so
the system linker knows where the local entry point is, inserts code to save the
TOC pointer at 24(r1), adds a nop after any call not known to be local and copes
with the odd non-local code transfer in the runtime (e.g. the stuff around
jmpdefer). It does not actually compile PIC yet.
Change-Id: I7522e22bdfd2f891745a900c60254fe9e372c854
Reviewed-on: https://go-review.googlesource.com/15967
Reviewed-by: Russ Cox <rsc@golang.org>
The larger stack frames causes the nosplit stack to overflow so the next change
increases the stackguard.
Change-Id: Ib2b4f24f0649eb1d13e3a58d265f13d1b6cc9bf9
Reviewed-on: https://go-review.googlesource.com/15964
Reviewed-by: Russ Cox <rsc@golang.org>
This change breaks out most of the atomics functions in the runtime
into package runtime/internal/atomic. It adds some basic support
in the toolchain for runtime packages, and also modifies linux/arm
atomics to remove the dependency on the runtime's mutex. The mutexes
have been replaced with spinlocks.
all trybots are happy!
In addition to the trybots, I've tested on the darwin/arm64 builder,
on the darwin/arm builder, and on a ppc64le machine.
Change-Id: I6698c8e3cf3834f55ce5824059f44d00dc8e3c2f
Reviewed-on: https://go-review.googlesource.com/14204
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Building Go shared libraries requires that all functions that have declarations
without bodies have implementations and vice versa, so remove the
implementation of call16 and add a stub implementation of sigreturn.
Change-Id: I4d5a30c8637a5da7991054e151a536611d5bea46
Reviewed-on: https://go-review.googlesource.com/15966
Reviewed-by: Ian Lance Taylor <iant@golang.org>
PIC code on ppc64le uses R2 as a TOC pointer and when calling a function
through a function pointer must ensure the function pointer is in R12. These
rules are easy enough to follow unconditionally in our assembly, so do that.
Change-Id: Icfc4e47ae5dfbe15f581cbdd785cdeed6e40bc32
Reviewed-on: https://go-review.googlesource.com/15526
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Shared libraries on ppc64le will require a larger minimum stack frame (because
the ABI mandates that the TOC pointer is available at 24(R1)). Part 3 of that
is using a #define in the ppc64 assembly to refer to the size of the fixed
part of the stack (finding all these took me about a week!).
Change-Id: I50f22fe1c47af1ec59da1bd7ea8f84a4750df9b7
Reviewed-on: https://go-review.googlesource.com/15525
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Replace the confusing game where a frame size of $-8 would suppress the
implicit setting up of a stack frame with a nice explicit flag.
The code to set up the function prologue is still a little confusing but better
than it was.
Change-Id: I1d49278ff42c6bc734ebfb079998b32bc53f8d9a
Reviewed-on: https://go-review.googlesource.com/15670
Reviewed-by: Minux Ma <minux@golang.org>
I noticed that they were unimplemented on arm64 but then that they were
in fact not used at all.
Change-Id: Iee579feda2a5e374fa571bcc8c89e4ef607d50f6
Reviewed-on: https://go-review.googlesource.com/13951
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
In preparation for rename of cgocall_errno into cgocall and
asmcgocall_errno into asmcgocall in the fllowinng CL.
rsc requested CL 9387 to be split into two parts. This is first part.
Change-Id: I7434f0e4b44dd37017540695834bfcb1eebf0b2f
Reviewed-on: https://go-review.googlesource.com/11166
Reviewed-by: Ian Lance Taylor <iant@golang.org>
All of the architectures except ppc64 have only "RET" for the return
mnemonic. ppc64 used to have only "RETURN", but commit cf06ea6
introduced RET as a synonym for RETURN to make ppc64 consistent with
the other architectures. However, that commit was never followed up to
make the code itself consistent by eliminating uses of RETURN.
This commit replaces all uses of RETURN in the ppc64 assembly with
RET.
This was done with
sed -i 's/\<RETURN\>/RET/' **/*_ppc64x.s
plus one manual change to syscall/asm.s.
Change-Id: I3f6c8d2be157df8841d48de988ee43f3e3087995
Reviewed-on: https://go-review.googlesource.com/10672
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
This commit implements stack barriers to minimize the amount of
stack re-scanning that must be done during mark termination.
Currently the GC scans stacks of active goroutines twice during every
GC cycle: once at the beginning during root discovery and once at the
end during mark termination. The second scan happens while the world
is stopped and guarantees that we've seen all of the roots (since
there are no write barriers on writes to local stack
variables). However, this means pause time is proportional to stack
size. In particularly recursive programs, this can drive pause time up
past our 10ms goal (e.g., it takes about 150ms to scan a 50MB heap).
Re-scanning the entire stack is rarely necessary, especially for large
stacks, because usually most of the frames on the stack were not
active between the first and second scans and hence any changes to
these frames (via non-escaping pointers passed down the stack) were
tracked by write barriers.
To efficiently track how far a stack has been unwound since the first
scan (and, hence, how much needs to be re-scanned), this commit
introduces stack barriers. During the first scan, at exponentially
spaced points in each stack, the scan overwrites return PCs with the
PC of the stack barrier function. When "returned" to, the stack
barrier function records how far the stack has unwound and jumps to
the original return PC for that point in the stack. Then the second
scan only needs to proceed as far as the lowest barrier that hasn't
been hit.
For deeply recursive programs, this substantially reduces mark
termination time (and hence pause time). For the goscheme example
linked in issue #10898, prior to this change, mark termination times
were typically between 100 and 500ms; with this change, mark
termination times are typically between 10 and 20ms. As a result of
the reduced stack scanning work, this reduces overall execution time
of the goscheme example by 20%.
Fixes#10898.
The effect of this on programs that are not deeply recursive is
minimal:
name old time/op new time/op delta
BinaryTree17 3.16s ± 2% 3.26s ± 1% +3.31% (p=0.000 n=19+19)
Fannkuch11 2.42s ± 1% 2.48s ± 1% +2.24% (p=0.000 n=17+19)
FmtFprintfEmpty 50.0ns ± 3% 49.8ns ± 1% ~ (p=0.534 n=20+19)
FmtFprintfString 173ns ± 0% 175ns ± 0% +1.49% (p=0.000 n=16+19)
FmtFprintfInt 170ns ± 1% 175ns ± 1% +2.97% (p=0.000 n=20+19)
FmtFprintfIntInt 288ns ± 0% 295ns ± 0% +2.73% (p=0.000 n=16+19)
FmtFprintfPrefixedInt 242ns ± 1% 252ns ± 1% +4.13% (p=0.000 n=18+18)
FmtFprintfFloat 324ns ± 0% 323ns ± 0% -0.36% (p=0.000 n=20+19)
FmtManyArgs 1.14µs ± 0% 1.12µs ± 1% -1.01% (p=0.000 n=18+19)
GobDecode 8.88ms ± 1% 8.87ms ± 0% ~ (p=0.480 n=19+18)
GobEncode 6.80ms ± 1% 6.85ms ± 0% +0.82% (p=0.000 n=20+18)
Gzip 363ms ± 1% 363ms ± 1% ~ (p=0.077 n=18+20)
Gunzip 90.6ms ± 0% 90.0ms ± 1% -0.71% (p=0.000 n=17+18)
HTTPClientServer 51.5µs ± 1% 50.8µs ± 1% -1.32% (p=0.000 n=18+18)
JSONEncode 17.0ms ± 0% 17.1ms ± 0% +0.40% (p=0.000 n=18+17)
JSONDecode 61.8ms ± 0% 63.8ms ± 1% +3.11% (p=0.000 n=18+17)
Mandelbrot200 3.84ms ± 0% 3.84ms ± 1% ~ (p=0.583 n=19+19)
GoParse 3.71ms ± 1% 3.72ms ± 1% ~ (p=0.159 n=18+19)
RegexpMatchEasy0_32 100ns ± 0% 100ns ± 1% -0.19% (p=0.033 n=17+19)
RegexpMatchEasy0_1K 342ns ± 1% 331ns ± 0% -3.41% (p=0.000 n=19+19)
RegexpMatchEasy1_32 82.5ns ± 0% 81.7ns ± 0% -0.98% (p=0.000 n=18+18)
RegexpMatchEasy1_1K 505ns ± 0% 494ns ± 1% -2.16% (p=0.000 n=18+18)
RegexpMatchMedium_32 137ns ± 1% 137ns ± 1% -0.24% (p=0.048 n=20+18)
RegexpMatchMedium_1K 41.6µs ± 0% 41.3µs ± 1% -0.57% (p=0.004 n=18+20)
RegexpMatchHard_32 2.11µs ± 0% 2.11µs ± 1% +0.20% (p=0.037 n=17+19)
RegexpMatchHard_1K 63.9µs ± 2% 63.3µs ± 0% -0.99% (p=0.000 n=20+17)
Revcomp 560ms ± 1% 522ms ± 0% -6.87% (p=0.000 n=18+16)
Template 75.0ms ± 0% 75.1ms ± 1% +0.18% (p=0.013 n=18+19)
TimeParse 358ns ± 1% 364ns ± 0% +1.74% (p=0.000 n=20+15)
TimeFormat 360ns ± 0% 372ns ± 0% +3.55% (p=0.000 n=20+18)
Change-Id: If8a9bfae6c128d15a4f405e02bcfa50129df82a2
Reviewed-on: https://go-review.googlesource.com/10314
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This makes it easier to experiment with alternative implementations.
While we're here, update the comments.
No functional changes. Passes toolstash -cmp.
Change-Id: I428535754908f0fdd7cc36c214ddb6e1e60f376e
Reviewed-on: https://go-review.googlesource.com/8310
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
runtime·main·f is normalized by the linker to runtime.main.f, as is
the compiler-generated symbol runtime.main·f. Change the former to
runtime·mainPC instead.
Fixes issue #9934
Change-Id: I656a6fa6422d45385fa2cc55bd036c6affa1abfe
Reviewed-on: https://go-review.googlesource.com/8234
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
We're skating on thin ice, and things are finally starting to melt around here.
(I want to avoid the debugging session that will happen when someone
uses atomicand8 expecting it to be atomic with respect to other operations.)
Change-Id: I254f1582be4eb1f2d7fbba05335a91c6bf0c7f02
Reviewed-on: https://go-review.googlesource.com/7861
Reviewed-by: Minux Ma <minux@golang.org>
Also fixed a stack corruption bug for nacl/amd64p32.
Change-Id: I64b821b16999c296a159137d971af3870053c621
Signed-off-by: Shenghou Ma <minux@golang.org>
Reviewed-on: https://go-review.googlesource.com/7073
Reviewed-by: Dave Cheney <dave@cheney.net>
We used to not call traceback from goexit1.
But now tracer does it and crashes on amd64p32:
runtime: unexpected return pc for runtime.getg called from 0x108a4240
goroutine 18 [runnable, locked to thread]:
runtime.traceGoEnd()
src/runtime/trace.go:758 fp=0x10818fe0 sp=0x10818fdc
runtime.goexit1()
src/runtime/proc1.go:1540 +0x20 fp=0x10818fe8 sp=0x10818fe0
runtime.getg(0x0)
src/runtime/asm_386.s:2414 fp=0x10818fec sp=0x10818fe8
created by runtime/pprof_test.TestTraceStress
src/runtime/pprof/trace_test.go:123 +0x500
Return PC from goexit1 points right after goexit (+0x6).
It happens to work most of the time somehow.
This change fixes traceback from goexit1 by adding an additional NOP to goexit.
Fixes#9931
Change-Id: Ied25240a181b0a2d7bc98127b3ed9068e9a1a13e
Reviewed-on: https://go-review.googlesource.com/5460
Reviewed-by: Russ Cox <rsc@golang.org>
Package runtime's Go code was converted to directly call getcallerpc
and getcallersp in https://golang.org/cl/138740043, but the assembly
implementations were not removed.
Change-Id: Ib2eaee674d594cbbe799925aae648af782a01c83
Reviewed-on: https://go-review.googlesource.com/5901
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
eqstring does not need to check the length of the strings.
Other architectures were done in a separate commit.
While we're here, add a pointer equality check.
Change-Id: Id2c8616a03a7da7037c1e9ccd56a549fc952bd98
Reviewed-on: https://go-review.googlesource.com/3956
Reviewed-by: Keith Randall <khr@golang.org>
The equal algorithm used to take the size
equal(p, q *T, size uintptr) bool
With this change, it does not
equal(p, q *T) bool
Similarly for the hash algorithm.
The size is rarely used, as most equal functions know the size
of the thing they are comparing. For instance f32equal already
knows its inputs are 4 bytes in size.
For cases where the size is not known, we allocate a closure
(one for each size needed) that points to an assembly stub that
reads the size out of the closure and calls generic code that
has a size argument.
Reduces the size of the go binary by 0.07%. Performance impact
is not measurable.
Change-Id: I6e00adf3dde7ad2974adbcff0ee91e86d2194fec
Reviewed-on: https://go-review.googlesource.com/2392
Reviewed-by: Russ Cox <rsc@golang.org>
This implements support for calls to and from C in the ppc64 C ABI, as
well as supporting functionality such as an entry point from the
dynamic linker.
Change-Id: I68da6df50d5638cb1a3d3fef773fb412d7bf631a
Reviewed-on: https://go-review.googlesource.com/2009
Reviewed-by: Russ Cox <rsc@golang.org>
Cgo will need this for calls from C to Go and for handling signals
that may occur in C code.
Change-Id: I50cc4caf17cd142bff501e7180a1e27721463ada
Reviewed-on: https://go-review.googlesource.com/2008
Reviewed-by: Russ Cox <rsc@golang.org>
Use typedmemmove, typedslicecopy, and adjust reflect.call
to execute the necessary write barriers.
Found with GODEBUG=wbshadow=2 mode.
Eventually that will run automatically, but right now
it still detects other missing write barriers.
Change-Id: Iec5b5b0c1be5589295e28e5228e37f1a92e07742
Reviewed-on: https://go-review.googlesource.com/2312
Reviewed-by: Keith Randall <khr@golang.org>
This reverts commit ab0535ae3f.
I think it will remain useful to distinguish code that must
run on a system stack from code that can run on either stack,
even if that distinction is no
longer based on the implementation language.
That is, I expect to add a //go:systemstack comment that,
in terms of the old implementation, tells the compiler,
to pretend this function was written in C.
Change-Id: I33d2ebb2f99ae12496484c6ec8ed07233d693275
Reviewed-on: https://go-review.googlesource.com/2275
Reviewed-by: Russ Cox <rsc@golang.org>
Now that we've removed all the C code in runtime and the C compilers,
there is no need to have a separate stackguard field to check for C
code on Go stack.
Remove field g.stackguard1 and rename g.stackguard0 to g.stackguard.
Adjust liblink and cmd/ld as necessary.
Change-Id: I54e75db5a93d783e86af5ff1a6cd497d669d8d33
Reviewed-on: https://go-review.googlesource.com/2144
Reviewed-by: Keith Randall <khr@golang.org>
Replace with uses of //go:linkname in Go files, direct use of name in .s files.
The only one that really truly needs a jump is reflect.call; the jump is now
next to the runtime.reflectcall assembly implementations.
Change-Id: Ie7ff3020a8f60a8e4c8645fe236e7883a3f23f46
Reviewed-on: https://go-review.googlesource.com/1962
Reviewed-by: Austin Clements <austin@google.com>
When we start work on Gerrit, ppc64 and garbage collection
work will continue in the master branch, not the dev branches.
(We may still use dev branches for other things later, but
these are ready to be merged, and doing it now, before moving
to Git means we don't have to have dev branches working
in the Gerrit workflow on day one.)
TBR=rlh
CC=golang-codereviews
https://golang.org/cl/183140043
