recover4 allocates 16 pages of memory via mmap, makes a 4 page hole in it with
munmap, allocates another 16 pages of memory via normal allocation and then
tries to copy from one to the other. For some reason on arm64 (but no other
platform I have tested) the second allocation sometimes causes the runtime to
ask the kernel for 4 additional pages of memory -- which the kernel satisfies
by remapping the pages that were just unmapped!
Moving the second allocation before the munmap fixes this behaviour, I can run
recover4 tens of thousands of times without failure with this fix vs a failure
rate of ~0.5% before.
Fixes#12549
Change-Id: I490b895b606897e4f7f25b1b51f5d485a366fffb
Reviewed-on: https://go-review.googlesource.com/14632
Reviewed-by: Dave Cheney <dave@cheney.net>
This one of a set of changes to make the transition away from NodeList
easier by removing cases in which NodeList doesn't act semi-trivially like a
[]*Node.
This CL was originally prepared by Josh Bleecher Snyder <josharian@gmail.com>.
This change passes go build -toolexec 'toolstash -cmp' -a std.
Change-Id: I4d041b343952f4a31f3150fd70669e08fcaa74f8
Reviewed-on: https://go-review.googlesource.com/14305
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This is a first of a set of changes to make the transition away from NodeList
easier by removing cases in which NodeList doesn't act semi-trivially like a
[]*Node.
This CL was originally prepared by Josh Bleecher Snyder <josharian@gmail.com>.
This change passes go build -toolexec 'toolstash -cmp' -a std.
Change-Id: Iad10b75e42b5b24e1694407841282fa3bab2dc9f
Reviewed-on: https://go-review.googlesource.com/14232
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The issue 12226 has been caused by the allocation of the same register
for the equality check of two byte values. The code in cgen.go freed the
register for the second operand before the allocation of the register
for the first operand.
Fixes#12226
Change-Id: Ie4dc33a488bd48a17f8ae9b497fd63c1ae390555
Reviewed-on: https://go-review.googlesource.com/13771
Reviewed-by: Russ Cox <rsc@golang.org>
Currently an expression like
var v = 0 >> 1000
is rejected by gc with a "stupid shift" error, while gotype
compiles it successfully.
As suggested by gri on the issue tracker, allow an rsh right
operand to be any valid uint value.
Fixes#11328
Change-Id: I6ccb3b7f842338d91fd26ae37dd4fa279d7fc440
Reviewed-on: https://go-review.googlesource.com/13777
Reviewed-by: Robert Griesemer <gri@golang.org>
The reg[] array in .../gc is where truth lies. The copy in .../ARCH
is incorrect as it is mostly not updated to reflect regalloc decisions.
This bug was introduced in the rewrite
https://go-review.googlesource.com/#/c/7853/. The new reg[] array was
introduced in .../gc but not all of the uses were removed in the
.../ARCH directories.
Fixes#12133
Change-Id: I6364fc403cdab92d802d17f2913ba1607734037c
Reviewed-on: https://go-review.googlesource.com/13630
Reviewed-by: Russ Cox <rsc@golang.org>
ODOTTYPE should be treated a whole lot like ODOT,
but it was missing completely from the switch in
escwalk and thus escape status did not propagate
to fields.
Since interfaces are required to trigger this bug,
the test was added to escape_iface.go.
Fixes#11931.
Change-Id: Id0383981cc4b1a160f6ad447192a112eed084538
Reviewed-on: https://go-review.googlesource.com/12921
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Instead of pushing the denominator argument on the stack,
the denominator is now passed in m.
This fixes a variety of bugs related to trying to take stack traces
backwards from the middle of the software div/mod routines.
Some of those bugs have been kludged around in the past,
but others have not. Instead of trying to patch up after breaking
the stack, this CL stops breaking the stack.
This is an update of https://golang.org/cl/19810043,
which was rolled back in https://golang.org/cl/20350043.
The problem in the original CL was that there were divisions
at bad times, when m was not available. These were divisions
by constant denominators, either in C code or in assembly.
The Go compiler knows how to generate division by multiplication
for constant denominators, but the C compiler did not.
There is no longer any C code, so that's taken care of.
There was one problematic DIV in runtime.usleep (assembly)
but https://golang.org/cl/12898 took care of that one.
So now this approach is safe.
Reject DIV/MOD in NOSPLIT functions to keep them from
coming back.
Fixes#6681.
Fixes#6699.
Fixes#10486.
Change-Id: I09a13c76ad08ba75b3bd5d46a3eb78e66a84ab38
Reviewed-on: https://go-review.googlesource.com/12899
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The layout code has to date insisted on stack frames that are 16-aligned
including the saved LR, and it ensured this by growing the frame itself.
This breaks code that refers to values near the top of the frame by positive
offset from SP, and in general it's too magical: if you see TEXT xxx, $N,
you expect that the frame size is actually N, not sometimes N and sometimes N+8.
This led to a serious bug in the compiler where ambiguously live values
were not being zeroed correctly, which in turn triggered an assertion
in the GC about finding only valid pointers. The compiler has been
fixed to always emit aligned frames, and the hand-written assembly
has also been fixed.
Now that everything is aligned, make unaligned an error instead of
something to "fix" silently.
For #9880.
Change-Id: I05f01a9df174d64b37fa19b36a6b6c5f18d5ba2d
Reviewed-on: https://go-review.googlesource.com/12848
Reviewed-by: Austin Clements <austin@google.com>
Russ Cox fixed this issue for other systems
in CL 12026, but the Plan 9 part was forgotten.
Fixes#11656.
Change-Id: I91c033687987ba43d13ad8f42e3fe4c7a78e6075
Reviewed-on: https://go-review.googlesource.com/12762
Reviewed-by: Russ Cox <rsc@golang.org>
This is a reprise of https://golang.org/cl/12623. In that a CL I made
a suggestion which forgot that the +build constraints in the test
directory are not the same as those supported by the go tool: in the
test directory, if a single +build line fails, the test is skipped.
(In my defense, the code I was commenting on was also wrong.)
Change-Id: I8f29392a80b1983027f9a33043c803578409d678
Reviewed-on: https://go-review.googlesource.com/12776
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Old code appended, did not play well with a closure
with a ... param.
Fixes#11075.
Change-Id: Ib7c8590c5c4e576e798837e7499e00f3494efb4a
Reviewed-on: https://go-review.googlesource.com/12580
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Chase <drchase@google.com>
There was already special code to recognize "?" in hidden_structdcl,
which is used for inlined types and variables. This recognizes "?" in
structdcl as well, a case that arises when a struct type appears
within an inlined function body.
Fixes#10219.
Change-Id: Ic5257ae54f817e0d4a189c2294dcd633c9f2101a
Reviewed-on: https://go-review.googlesource.com/12241
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The one in misc/makerelease/makerelease.go is particularly bad and
probably warrants rotating our keys.
I didn't update old weekly notes, and reverted some changes involving
test code for now, since we're late in the Go 1.5 freeze. Otherwise,
the rest are all auto-generated changes, and all manually reviewed.
Change-Id: Ia2753576ab5d64826a167d259f48a2f50508792d
Reviewed-on: https://go-review.googlesource.com/12048
Reviewed-by: Rob Pike <r@golang.org>
This avoids both a write barrier and then dynamic initialization
globals of the form
var x something
var xp = unsafe.Pointer(&x)
Using static initialization avoids emitting a relocation for &x,
which helps cgo.
Fixes#9411.
Change-Id: I0dbf480859cce6ab57ab805d1b8609c45b48f156
Reviewed-on: https://go-review.googlesource.com/11693
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Russ Cox <rsc@golang.org>
We can't address more than this on amd64 anyway.
Fixes#9862.
Change-Id: Ifb1abae558e2e1ee2dc953a76995f3f08c60b1df
Reviewed-on: https://go-review.googlesource.com/11715
Reviewed-by: Austin Clements <austin@google.com>
Currently the runtime fails to clear a G's stack barriers in gfput if
the G's stack allocation is _FixedStack bytes. This causes the runtime
to panic if the following sequence of events happens:
1) The runtime installs stack barriers on a G.
2) The G exits by calling runtime.Goexit. Since this does not
necessarily return through the stack barriers installed on the G,
there may still be untriggered stack barriers left on the G's stack
in recorded in g.stkbar.
3) The runtime calls gfput to add the exiting G to the free pool. If
the G's stack allocation is _FixedStack bytes, we fail to clear
g.stkbar.
4) A new G starts and allocates the G that was just added to the free
pool.
5) The new G begins to execute and overwrites the stack slots that had
stack barriers in them.
6) The garbage collector enters mark termination, attempts to remove
stack barriers from the new G, and finds that they've been
overwritten.
Fix this by clearing the stack barriers in gfput in the case where it
reuses the stack.
Fixes#11256.
Change-Id: I377c44258900e6bcc2d4b3451845814a8eeb2bcf
Reviewed-on: https://go-review.googlesource.com/11461
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Reviewed-by: Russ Cox <rsc@golang.org>
In walkdiv, an OMUL node was created and passed to typecheck,
before the op was changed back to OHMUL. In some instances,
the node that came back was an evaluated literal constant that
occurred with a full multiply. The end result was a literal node
with a non-shifted value and an OHMUL op. This change causes code
to be generated for the OHMUL.
Fixes#11358Fixes#11369
Change-Id: If42a98c6830d07fe065d5ca57717704fb8cfbd33
Reviewed-on: https://go-review.googlesource.com/11400
Reviewed-by: Russ Cox <rsc@golang.org>
When heapBitsSetType repeats a source bitmap with a scalar tail
(typ.ptrdata < typ.size), it lays out the tail upon reaching the end
of the source bitmap by simply increasing the number of bits claimed
to be in the incoming bit buffer. This causes later iterations to read
the appropriate number of zeros out of the bit buffer before starting
on the next repeat of the source bitmap.
Currently, however, later iterations of the loop continue to read bits
from the source bitmap *regardless of the number of bits currently in
the bit buffer*. The bit buffer can only hold 32 or 64 bits, so if the
scalar tail is large and the padding bits exceed the size of the bit
buffer, the read from the source bitmap on the next iteration will
shift the incoming bits into oblivion when it attempts to put them in
the bit buffer. When the buffer does eventually shift down to where
these bits were supposed to be, it will contain zeros. As a result,
words that should be marked as pointers on later repetitions are
marked as scalars, so the garbage collector does not trace them. If
this is the only reference to an object, it will be incorrectly freed.
Fix this by adding logic to drain the bit buffer down if it is large
instead of reading more bits from the source bitmap.
Fixes#11286.
Change-Id: I964432c4b9f1cec334fc8c3da0ff16460203feb6
Reviewed-on: https://go-review.googlesource.com/11360
Reviewed-by: Russ Cox <rsc@golang.org>
When a method is called using the Type.Method(receiver, args...) syntax
without the receiver, or enough arguments, provide the more helpful
error message "not enough arguments in call to method expression
Type.Method" instead of the old message "not enough arguments in call
to Type.Method".
Fixes#8385
Change-Id: Id5037eb1ee5fa93687d4a6557b4a8233b29e9df2
Reviewed-on: https://go-review.googlesource.com/2193
Reviewed-by: Russ Cox <rsc@golang.org>
Also modified test/run.go to ignore messages prefixed <autogenerated>
because those cannot be described with "// ERROR ...", and backed out
patch from issue #9537 because it is no longer necessary. The reasons
described in the 9537 discussion for why escape analysis cannot run
late no longer hold, happily.
Fixes#11053.
Change-Id: Icb14eccdf2e8cde3d0f8fb8a216b765400a96385
Reviewed-on: https://go-review.googlesource.com/11088
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Chase <drchase@google.com>
Bool codegen was generating a temp for function calls
and other complex expressions, but was not using it.
This was a refactoring bug introduced by CL 7853.
The cmp code used to do (in short):
l, r := &n1, &n2
It was changed to:
l, r := nl, nr
But the requisite assignments:
nl, nr = &n1, &n2
were only introduced on one of two code paths.
Fixes#10654.
Change-Id: Ie8de0b3a333842a048d4308e02911bb10c6915ce
Reviewed-on: https://go-review.googlesource.com/10844
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
People invoking the linker directly already have to change their scripts
to use the new "go tool link", so this is a good time to make the -X flag
behave like all other Go flags and take just a single argument.
The old syntax will continue to be accepted (it is rewritten into the new
syntax before flag parsing). Maybe some day we will be able to retire it.
Even if we never retire the old syntax, having the new syntax at least
makes the rewriting much less of a kludge.
Change-Id: I91e8df94f4c22b2186e81d7f1016b8767d777eac
Reviewed-on: https://go-review.googlesource.com/10310
Reviewed-by: Rob Pike <r@golang.org>
Also modifies 'dist test' to use that sharding, and removes some old
temporary stuff from dist test which are no longer required.
'dist test' now also supports running a list of tests given in
arguments, mutually exclusive with the existing -run=REGEXP flag. The
hacky fast paths for avoiding the 1 second "go list" latency are now
removed and only apply to the case where partial tests are run via
args, instead of regex. The build coordinator will use both styles
for awhile. (the statically-sharded ARM builders on scaleway will
continue to use regexps, but the dynamically-shared builders on GCE
will use the list of tests)
Updates #10029
Change-Id: I557800a54dfa6f3b5100ef4c26fe397ba5189813
Reviewed-on: https://go-review.googlesource.com/10688
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Memory usage has been reduced.
The tests are still slow,
but that is issue #10571.
/usr/bin/time shows significant variation
in the peak memory usage compiling with tip.
This is unsurprising, given GC.
Using Go 1.4.2, memory is stable at 410mb.
Using tip at d2ee09298,
memory ranges from 470mb (+15%) to 534mb (+30%),
with a mean of 504mb (+23%), with n=50.
Fixes#9933.
Change-Id: Id31f3ae086ec324abf70e8f1a8044c4a0c27e274
Reviewed-on: https://go-review.googlesource.com/10211
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Use pkgimport == nil (or not) to distinguish between
parsing .go source files where "p" exponent specifier
is not allowed and parsing .a or .o export data where
it is. Use that to control error when p-exponent is
seen.
Fixes#9036
Change-Id: I8924f09c91d4945ef3f20e80a6e544008a94a7e4
Reviewed-on: https://go-review.googlesource.com/10450
Reviewed-by: Russ Cox <rsc@golang.org>
This is dead code that was missed
during the 'go tool compile' migration.
Change-Id: Ice2af8a9ef72f8fd5f82225ee261854d93b659f1
Reviewed-on: https://go-review.googlesource.com/10430
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Added a lineno parameter to treecopy and listtreecopy
(ignored if = 0). When nodes are copied the copy is
assigned the non-zero lineno (normally this would be
the destination).
Fixes#8183
Change-Id: Iffb767a745093fb89aa08bf8a7692c2f0122be98
Reviewed-on: https://go-review.googlesource.com/10334
Reviewed-by: Russ Cox <rsc@golang.org>
