The module cache can only be added to, so any information discovered
about directories that are within a module in the module cache will
not change. Store the information we have discovered about the module
cache.
Updates #32750
Change-Id: I56c88f03f6a364221198fb032b139208497cd0e5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/188762
Reviewed-by: Heschi Kreinick <heschi@google.com>
Optimize a few things to speed up deep completions:
- item() is slow, so don't call it unless the candidate's name matches
the input.
- We only end up returning the top 3 deep candidates, so skip deep
candidates early if they are not in the top 3 scores we have seen so
far. This greatly reduces calls to item(), but also avoids a
humongous sort in lsp/completion.go.
- Get rid of error return value from found(). Nothing checked for this
error, and we spent a lot of time allocating the only possible error
"this candidate is not accessible", which is not unexpected to begin
with.
- Cache the call to types.NewMethodSet in methodsAndFields(). This is
relatively expensive and can be called many times for the same type
when searching for deep completions.
- Avoid calling deepState.chainString() twice by calling it once and
storing the result on the candidate.
These optimizations sped up my slow completion from 1.5s to
0.5s. There were around 200k deep candidates examined for this one
completion. The remaining time is dominated by the fuzzy
matcher. Obviously 500ms is still unacceptable under any
circumstances, so there will be subsequent improvements to limit the
deep completion search scope to make sure we always return completions
in a reasonable amount of time.
I also made it so there is always a "matcher" set on the
completer. This makes the matching logic a bit simpler.
Change-Id: Id48ef7031ee1d4ea04515c828277384562b988a8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190522
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
this moves the actual diff algorithm into a different package and then provides hooks so it can be easily replaced with an alternate algorithm.
Change-Id: Ia0359f58878493599ea0e0fda8920f21100e16f1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190898
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This changes to use a mutex and directly execute the less performance
sensitive telemetry calls (tracing and logging) and then uses a submission
queue only for stats adjustments as those are much more sensitive (but it
should also be easier to keep up with them in bursts)
Fixesgolang/go#33692
Change-Id: Ia59a8975f21dfbfcf115be1f1d11b097be8dd9c8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190737
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Test that having a comment at the start of a file allows imports
to be added correctly.
Updates golang/go#33721
Change-Id: Id1673c2509537413710b73261ad2a59afe06b93f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190800
Run-TryBot: Suzy Mueller <suzmue@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Insert imports into existing multiline import declarations when
possible.
Logic for choosing where to insert taken from
golang.org/x/tools/go/ast/astutil.
Change-Id: Ie5ad96d5e3d5db2e92a2c05a6104d14a4a192ed3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190598
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This is a super minimal change that will simplify the diffs for when I
actually delete the getMapper function.
Change-Id: I16984b344c87b3645fd451668b6ea747c5be12ab
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190557
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Unimported packages may be suggested as completion items. Since these
are not yet imported, they should be ranked lower than other candidates.
They also require an additional import statement to be valid, which is
provided as an AdditionalTextEdit.
Adding this import does not use astutil.AddNamedImport, to avoid
editing the current ast and work even if there are errors. Additionally,
it can be hard to determine what changes need to be made to the source
document from the ast, as astutil.AddNamedImport includes a merging
pass. Instead, the completion item simply adds another import
declaration.
Change-Id: Icbde226d843bd49ee3713cafcbd5299d51530695
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190338
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This is the first in a series of many changes that will change the API
of the source package to use different types for positions. Using
token.Pos is particularly fragile, since the pos has to refer to the
specific *ast.File from which it was derived.
Change-Id: I70c9b806f7dd45b2e229954ebdcdd86e2cf3bbbb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190340
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Rename checks all of the packages that may be affected for conflicts. An
error in any of them leads to renaming error. Returning errors from
multiple packages may be confusing (for example, when there is a test
variant of a package and the same error appears twice). This change
stops after an error is found and returns that error instead of
continuing to search.
Change-Id: Ifba1feddbf8829d3aad30309154d578967e05a36
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190416
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This exposes the candidate imports that are discovered, even if there is
not a particular reference that requires it to be imported. Currently,
this only produces results for standard library packages.
This is useful for autocompletion on unimported packages.
Change-Id: Iafd883153d451a0ef1dae29b24d4d48530c855f7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189999
Run-TryBot: Suzy Mueller <suzmue@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
this shuffles things so there a single exporter API rather than an observer
It also removes most of the globals.
per telemetry type.
Change-Id: Iaa82abe2ded1fff9df8e067ed4a55bcbd9d9591f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190405
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
This change will just make it a bit easier to debug the context
cancellation errors.
Change-Id: I580751ac04e3357031678eb31914828029c96e4b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190412
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This makes the code read slightly better, and more closely
aligns with the open telemetry code.
Change-Id: I87eaf7d08b802f7862f896f2654456ee6a7681e3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190404
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
This is a straight move of some code with no changes.
It splits the part of the telemetry code that will become a standalone library from the bit that belongs in the lsp.
Change-Id: Icedb6bf1f3711da9251450531729984df6df7787
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190403
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We need to limit the concurrent file reads to prevent `too many open
file` errors. The first attempt to solve this was done in change 189437,
but this change turned out to be incorrect.
So this change reverts the changes made in change 189437 and instead
adds an new semaphore around the `nativeFileHandle.Read` method.
The limit is currently set to half of the lowest open file system limit
of *nix, Windows and MacOS system (their respective limits are 1024, 16384,
and 256).
Change-Id: I27d741e3a3c36eb11bfa7457575f5d5831c06ad7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190417
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This fix adds all packages to the renamer packages map.
Renaming performs checks on each package to make sure there are no
conflicts. If there are multiple packages, each package needs to be
checked. The packages were being incorrectly added to the map and were
all being put under a single key.
Fixesgolang/go#33664
Change-Id: I68466ce34ac49b700ce6d14ce0b53e2795926fa9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190399
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
When an import is added to the ast, the import declarations are merged
together into the first import declaration. Since this is a part of
the formatting functionality of goimports, do this during formatting
regardless.
The merging pass was added to astutil.AddNamedImport in order to address
issue golang/go#14075. This joined imports from other blocks into the first
import declaration, so that a single block of imports isn't split across
multiple blocks.
This functionality is more of a formatting change than a fix imports
change, in line with sorting the imports, which occurs even when
FormatOnly. The formatting was only applied when an import was added
(not renamed or deleted). This change makes formatting by goimports
more consistent across runs and is not dependent on the exact fixes
that need to be applied.
Change-Id: Icb90bf694ff35e2d6405a3d477cf82fcd3e697e0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189941
Run-TryBot: Suzy Mueller <suzmue@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Have the imports resolvers load the exports for packages. This allows
each resolver to provide its own implementation of loading exports,
beyond reading from the directory.
Change-Id: I813f2ca59271a1698874556e8771243ac008f46f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/188759
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Test the api of the internal imports package to make sure that it does
not crash when given nil as opts or Env.
Change-Id: I0127d550a49f63040efb16c07e8cff8b599bbe3c
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190000
Reviewed-by: Heschi Kreinick <heschi@google.com>
When there's an error running the C compiler for cgo, go list will produce
output, but will also complain in stderr, and return a nonzero exit status.
But it sholudn't return a non-zero exit status in that case when run with
-e. Check for and suppress this case.
Fixesgolang/go#33462
Change-Id: Idae0970000a0cb134386f5e66d2b63b348ec8576
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190339
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
To prevent us from adding additional module dependencies to modules, especially
if the file is in a different module. Sometimes adding additional dependencies
would be the right behavior, but sometimes we run go list to determine
information about files in other modules, and modifying modules outside the one
the user is operating in is bad behavior.
Fixesgolang/go#32499
Change-Id: I2a12e0a64dc6cd34fa98931cbacc30707e5ba494
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190179
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change adds special handling for two more errors that 'go list'
prints to stderr:
1. when trying to construct an ad-hoc package from files in multiple
directories
2. the "unexpected directory layout" error (#24854)
Change-Id: Icbd14bcc02c2ca9676dc0449e155ff817da038cb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190077
Run-TryBot: Dominik Honnef <dominik@honnef.co>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
This change fixes a race condition in the metadata caching logic.
Also, some minor fixes to comments and invalidation logic (it's not
necessary to invalidate ASTs when a package is invalidated).
Change-Id: I927bf6fbc661a86ef0ba99b29a9ed979cd1eb95d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190317
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Make use of the existing fuzzy matcher to perform server side fuzzy
completion matching. Previously the server did exact prefix matching
for completion candidates and left fancy filtering to the
client. Having the server do fuzzy matching has two main benefits:
- Deep completions now update as you type. The completion candidates
returned to the client are marked "incomplete", causing the client
to refresh the candidates after every keystroke. This lets the
server pick the most relevant set of deep completion candidates.
- All editors get fuzzy matching for free. VSCode has fuzzy matching
out of the box, but some editors either don't provide it, or it can
be difficult to set up.
I modified the fuzzy matcher to allow matches where the input doesn't
match the final segment of the candidate. For example, previously "ab"
would not match "abc.def" because the "b" in "ab" did not match the
final segment "def". I can see how this is useful when the text
matching happens in a vacuum and candidate's final segment is the most
specific part. But, in our case, we have various other methods to
order candidates, so we don't want to exclude them just because the
final segment doesn't match. For example, if we know our candidate
needs to be type "context.Context" and "foo.ctx" is of the right type,
we want to suggest "foo.ctx" as soon as the user starts inputting
"foo", even though "foo" doesn't match "ctx" at all.
Note that fuzzy matching is behind the "useDeepCompletions" config
flag for the time being.
Change-Id: Ic7674f0cf885af770c30daef472f2e3c5ac4db78
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190099
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This change eliminates the need for the package cache map, and instead
stores package type information in the store. We still have to maintain
invalidation logic because the key is not computed correctly.
Change-Id: I1c2a7502b99491ef0ff68d68c9f439503d531ff1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/185438
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
When it is certain we are completing a struct field name, we don't
want deep completions. The only possible completions are the remaining
field names.
I also silenced the log spam in tests by disabling the go/packages
logger and the lsp logger.
Fixesgolang/go#33614
Change-Id: Icec8d92112b1674fa7a6a21145ab710d054919b4
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190097
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Fix will rewrite all the files in place given that there were no
overlapping or invalid suggested fixes. It's intended to be used
with analyses that generate refactorings.
Change-Id: I7ef3c872b58fdd4913fc34b725188e1846969849
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189997
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Whent the pointer is nil, changing its value does not fix the returned
options. Return the new pointer so it can be used.
Change-Id: Ie17fe5c47b48b4a77ffb17b974a5c90e3b44df5e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189998
Run-TryBot: Suzy Mueller <suzmue@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change configures the ordering of documentation on hover. If the
user has requested full documentation, the signature appears at the top,
to avoid the user having to scroll. Otherwise, the signature appears at
the bottom, to minimize the distance between the triggering identifier
and the signature.
Updates golang/go#33352
Change-Id: I017baaabd0ee0c31cb13cb6abdda296782929823
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189943
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This fixes a nil pointer bug that occurs when opt is nil.
If nil is provide as opt to the internal/imports package, use the
default options settings.
Also check separately that Env is non-nil, as this would also cause
a crash.
Change-Id: I9a43b219b31ba80b7cb8111437f211cb72f1ca18
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189939
Reviewed-by: Heschi Kreinick <heschi@google.com>
This change fixes documentation for completion items by using cached
package and AST information to derive the documentation. We also add
testing for documentation in completion items.
Change-Id: I911fb80f5cef88640fc06a9fe474e5da403657e3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189237
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Refactors somepath to print an adjacency list from "from" to "to", instead of
just the nodes. This allows other tools like modgraphviz to print the subgraph.
This is a breaking change. The previous behavior returned vertices; now it
returns edges. If you relied on the previous behavior, use:
my-application | digraph somepath <from> <to> | digraph nodes
Change-Id: Id5e77e19eea79849ec6f25018f627c8dc4e2a831
Reviewed-on: https://go-review.googlesource.com/c/tools/+/184338
Run-TryBot: Alan Donovan <adonovan@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alan Donovan <adonovan@google.com>
We're still leaving open the possibility of changing this API,
but things have baked for a bit so I feel comfortable removing the
build tag.
Also add some documentation.
Change-Id: I3beb666b58177553fc406dc9670d569d5928fedd
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189460
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
If a user runs a file= query for a source that doesn't exist,
and they are outside of a module, fill in the GoSources for the
empty package that go list returns, so the overlay can be applied.
Also add a hack for the case where go list can't determine the compiler
(gc or gccgo) a user is using because
go list -f "{{context.Compiler}}" -- unsafe
doesn't work. If go list complains that a user is outside a module,
we'll give ourselves flexibility to guess things because there's
no right answer. So we'll guess that the compiler is gc.
Fixesgolang/go#33482
Change-Id: I6a8aa0c617c4d803558389fb4272854245f59c5a
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189322
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
On MacOS the default open file limit is 256 files per process. For big
projects this could cause issues when reading all files (more or less)
at the same time.
By moving up the `parseLimit` so the reading of the file is only done
when it is allowed to start parsing the file, we stay well below the 256
files per process (as the `parseLimit` is currently set to 20).
Since `parseLimit` is actually only used to limit IO access, let's also
rename the const to `parseLimit`.
Change-Id: Ie8744030875d84d0d6095ee4ec2d9d553911bed1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189437
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
The `files` slice is used twice. First it's used to get all results from `ph.Parse`, and then it's reused to filter all `nil` values (which may have been returned by the `ph.Parse` method).
After the loop to "filter" out all the `nil` values, we also need to strip the remaining values.
I also changed the ordering so that we first check the errors and
only then perform this loop. That way the code will return earlier
when the context was canceled.
Partially fixes#33531 by prevention the panic reported in that issue.
Change-Id: I09478e765adcd0384ec4745921eb5c5aea405ef2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189397
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is probably a better approach than showing an extra diagnostic,
since a user cannot dismiss a diagnostic.
Fixesgolang/go#33397
Change-Id: I92b9a00f51a463673993793abfd4cfb99ce69a91
Reviewed-on: https://go-review.googlesource.com/c/tools/+/188766
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
It should work now that go packages accepts go1.13's new go list
behavior.
Updates golang/go#33157
Change-Id: I1780210b414bc0556e10e10c8c775fbfd2922b2e
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189038
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Then the rest of go/packages can process the go list output as usual.
Fixesgolang/go#33491
Change-Id: I1bd46154ce75d67dc3e18454a067bcc084526c5d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189160
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
