-lm must come after the source file, versions of gcc insist this strict order.
On standard compliant systems, we no longer need malloc.h for malloc.
Use pkg-config(1) to get correct glib cflags and libs.
Fix compiler warning in threadring.c and k-nucleotide.c.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/6198076
The type declarations were being generated using
a range over a map, which meant that successive
runs produced different orders. This will make sure
successive runs produce the same files.
Fixes#3707.
R=golang-dev, bradfitz
CC=golang-dev
https://golang.org/cl/6300062
If there are mutually recursive functions, there is a cycle in
the dependency graph, so the order is actually dependency order
among the strongly connected components: mutually recursive
functions get put into the same batch and analyzed together.
(Until now the entire package was put in one batch.)
The non-recursive case (single function, maybe with some
closures inside) will be able to be more precise about inputs
that escape only back to outputs, but that is not implemented yet.
R=ken2
CC=golang-dev, lvd
https://golang.org/cl/6304050
CL 4313064 fixed its test case but did not address a
general enough problem:
type T1 struct { F *T2 }
type T2 T1
type T3 T2
could still end up copying the definition of T1 for T2
before T1 was done being evaluated, or T3 before T2
was done.
In order to propagate the updates correctly,
record a copy of an incomplete type for re-execution
once the type is completed. Roll back CL 4313064.
Fixes#3709.
R=ken2
CC=golang-dev, lstoakes
https://golang.org/cl/6301059
This is part 1 of a 2 part changelist. Part 2 contains the mechanical
change to parse.go to compare atoms (ints) instead of strings.
The overall effect of the two changes are:
benchmark old ns/op new ns/op delta
BenchmarkParser 4462274 4058254 -9.05%
BenchmarkRawLevelTokenizer 913202 912917 -0.03%
BenchmarkLowLevelTokenizer 1268626 1267836 -0.06%
BenchmarkHighLevelTokenizer 1947305 1968944 +1.11%
R=rsc
CC=andybalholm, golang-dev, r
https://golang.org/cl/6305053
As discussed in
https://groups.google.com/d/msg/golang-dev/Na9XE6mcQyY/zbeBI7R-vnoJ
Here is a static copy of the go/parser benchmark. I ended up using
fancy encodings because the original parser.go had a number of `s
scattered throughout which made it hard to embed the source directly.
Curiously on my laptop this benchmark always scores roughly 10% higher
than the standalone benchmark. This may be down to the generation of
the fasta data set triggering the cpu governor to raise the cpu speed.
However the benchmark is consistent with itself across multiple runs.
R=golang-dev, minux.ma, rsc
CC=golang-dev
https://golang.org/cl/6305055
The datastore.Query methods once mutated the Query value, but now they return
a derivative query, so the Hash= and ParentHash= filters were not being
applied.
R=golang-dev, bradfitz, dsymonds
CC=golang-dev
https://golang.org/cl/6300058
The reordering speedup in CL 6245068 changed the semantics
of %#v by delaying the clearing of some flags. Restore the old
semantics and add a test.
Fixes#3706.
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/6302048
CL 6250075 removed AI_MASK mask on all BSD variants,
however FreeBSD's AI_MASK does not include AI_V4MAPPED
and AI_ALL, and its libc is strict about the ai_flags.
This will fix the FreeBSD builder.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/6305054
On netbsd/386, tv_sec is a 64-bit integer for both timeval and timespec.
Fix the time handling code so that it works correctly.
R=golang-dev, rsc, m4dh4tt3r
CC=golang-dev
https://golang.org/cl/6256056
As discussed on golang-dev, reduce the size of the fasta
dataset to make it possible to run the go1 benchmarks on
small ARM systems.
Also, remove the 25m suffix from fasta data and Revcomp.
linux/arm: pandaboard OMAP4
BenchmarkBinaryTree17 1 70892426000 ns/op
BenchmarkFannkuch11 1 35712066000 ns/op
BenchmarkGobDecode 10 137146000 ns/op 5.60 MB/s
BenchmarkGobEncode 50 64953000 ns/op 11.82 MB/s
BenchmarkGzip 1 5675690000 ns/op 3.42 MB/s
BenchmarkGunzip 1 1207001000 ns/op 16.08 MB/s
BenchmarkJSONEncode 5 860424800 ns/op 2.26 MB/s
BenchmarkJSONDecode 1 3321839000 ns/op 0.58 MB/s
BenchmarkMandelbrot200 50 45893560 ns/op
BenchmarkRevcomp 10 135220300 ns/op 18.80 MB/s
BenchmarkTemplate 1 6385681000 ns/op 0.30 MB/s
R=rsc, minux.ma, dsymonds
CC=golang-dev
https://golang.org/cl/6278048
Thanks to Dave Cheney for the magic words "comm page".
benchmark old ns/op new ns/op delta
BenchmarkNow 197 33 -83.05%
This should make profiling a little better on OS X.
The raw time saved is unlikely to matter: what likely matters
more is that it seems like OS X sends profiling signals on the
way out of system calls more often than it should; avoiding
the system call should increase the accuracy of cpu profiles.
The 386 version would be similar but needs to do different
math for CPU speeds less than 1 GHz. (Apparently Apple has
never shipped a 64-bit CPU with such a slow clock.)
R=golang-dev, bradfitz, dave, minux.ma, r
CC=golang-dev
https://golang.org/cl/6275056
amd64 was done in CL 6275056.
We don't attempt to handle machines with clock speeds
less than 1 GHz. Those will fall back to the system call.
benchmark old ns/op new ns/op delta
BenchmarkNow 364 38 -89.53%
R=golang-dev, r
CC=golang-dev
https://golang.org/cl/6307045
Using an int64 for a block size doesn't make
sense on 32bit platforms but extracts a performance
penalty dealing with double word quantities on Arm.
linux/arm
benchmark old ns/op new ns/op delta
BenchmarkGobDecode 155401600 144589300 -6.96%
BenchmarkGobEncode 72772220 62460940 -14.17%
BenchmarkGzip 5822632 2604797 -55.26%
BenchmarkGunzip 326321 151721 -53.51%
benchmark old MB/s new MB/s speedup
BenchmarkGobDecode 4.94 5.31 1.07x
BenchmarkGobEncode 10.55 12.29 1.16x
R=golang-dev, rsc, bradfitz
CC=golang-dev
https://golang.org/cl/6272047
It is not necessary for the test to be effective and uses a
lot of resources in the compiler. Memory usage is halved and
compilation around 8x faster.
R=golang-dev, r, rsc, r
CC=golang-dev
https://golang.org/cl/6290044
The original implementation of closures created the
underlying top-level function during walk, which is fairly
late in the compilation process and caused ordering-based
complications due to earlier stages that had to be repeated
any number of times.
Create the underlying function during typecheck, much
earlier, so that later stages can be run just once.
The result is a simpler compilation sequence.
R=ken2
CC=golang-dev
https://golang.org/cl/6279049
although the comment says it uses libc's getenv, without NOPLAN9DEFINES
it actually uses p9getenv which strdups.
R=golang-dev, dave, rsc
CC=golang-dev
https://golang.org/cl/6285046
The recent shuffle in parsing formats exposed probably unintentional
behavior in time.Parse, namely that it was mostly ignoring ".99999"
in the format, producing the following behavior:
fmt.Println(time.Parse("03:04:05.999 MST", "12:00:00.888 PDT")) // error (.888 unexpected)
fmt.Println(time.Parse("03:04:05.999", "12:00:00")) // error (input too short)
fmt.Println(time.Parse("03:04:05.999 MST", "12:00:00 PDT")) // ok (extra bytes on input make it ok)
http://play.golang.org/p/ESJ1UYXzq2
API CHANGE:
This CL makes all three examples valid: ".999" can match an
empty string or else a fractional second with at most nine digits.
Fixes#3701.
R=r, r
CC=golang-dev
https://golang.org/cl/6267045
An attempt to profit from CL 6176043 (fix to superpolinomial
runtime of karatsuba multiplication) and determine a better
karatsuba threshold. The result indicates that 32 is still
a reasonable value. Left the threshold as is (== 32), but
made some minor changes to the calibrate code which are
worthwhile saving (use of existing benchmarking code for
better results, better use of package time).
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/6260062
We can't depend on init() order, and certainly we don't want to
register all future benchmarks that use jsonbytes or jsondata to init()
in json_test.go, so we use a more general solution: make generation of
jsonbytes and jsondata their own function so that the compiler will take
care of the order.
R=golang-dev, dave, rsc
CC=golang-dev
https://golang.org/cl/6282046
Split stdout/stderr into a separate file so that can be handled
differently on some platforms. Both NetBSD and OpenBSD have defines
for stdout/stderr that require some coercion in order for cgo to
handle them correctly.
R=golang-dev, rsc
CC=golang-dev
https://golang.org/cl/6247062
pipe2 is equivalent to pipe with flags set to 0.
However, pipe2 was only added recently. Using pipe
instead improves compatibility with NetBSD 5.
R=jsing
CC=golang-dev
https://golang.org/cl/6268045
