- Allow for a type parameter as length/capacity to make.
- Be slightly more precise in prose for append.
- Add a couple of links.
Change-Id: Ib97e528bab1ab55d271beeeb53d9bb7a07047b9b
Reviewed-on: https://go-review.googlesource.com/c/go/+/391754
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
- Remove "Draft" disclaimer. We're not done but the spec
is in usable shape with respect to generics features.
- Remove section on "Earlier version" and fold information
into the "Intro" section.
- Remove caveat for shifts: the rules for arithmetic operators
on type parameters apply for them as well.
- Simply state that we don't support arguments of type parameter
type for the built-ins real, imag, and complex.
Fixes#51182.
Change-Id: I6df1427de685cfe7055b64e91753aa7ebff70565
Reviewed-on: https://go-review.googlesource.com/c/go/+/391695
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
- Change section title from "Type parameters lists" to
"Type parameter declarations" as the enclosing section
is about declarations.
- Correct section on parsing ambiguity in type parameter
lists.
- Rephrase paragraphs on type parameters for method receivers
and adjust examples.
- Remove duplicate prose in section on function argument type
inference.
- Clarified "after substitution" column in Instantiations section.
Change-Id: Id76be9804ad96a3f1221e5c4942552dde015dfcb
Reviewed-on: https://go-review.googlesource.com/c/go/+/390994
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Specific types were introduced to explain rules for operands of
type parameter type. Specific types are really an implementation
mechanism to represent (possibly infinite) type sets in the machine;
they are not needed in the specification.
A specific type is either standing for a single named or unnamed
type, or it is the underlying (unnamed) type of an infinite set of
types. Each rule that applies to a type T of the set of specific
types must also apply to all types T' in the type set for which T
is a representative of. Thus, in the spec we can simply refer to
the type set directly, infinite or not.
Rather then excluding operands with empty type sets in each instance,
leave unspecified what happens when such an operand is used. Instead
give an implementation some leeway with an implementation restriction.
(The implementation restriction also needs to be formulated for types,
such as in conversions, which technically are not "operands". Left for
another CL.)
Minor: Remove the two uses of the word "concrete" to refer to non-
interface types; instead just say "non-interface type" for clarity.
Change-Id: I67ac89a640c995369c9d421a03820a0c0435835a
Reviewed-on: https://go-review.googlesource.com/c/go/+/390694
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Type inference for types was always a "nice to have" feature.
Given the under-appreciated complexity of making it work in all
cases, and the fact that we don't have a good understanding of
how it might affect readability of generic code, require explicit
type arguments for generic types.
This matches the current implementation.
Change-Id: Ie7ff6293d3fbea92ddc54c46285a4cabece7fe01
Reviewed-on: https://go-review.googlesource.com/c/go/+/390577
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This change includes several smaller changes based on feedback
received so far.
These changes were reviewed at CL 385536. The only additional
change here is to the current date in the subtitle.
Change-Id: I653eb4a143e3b86c5357a2fd3b19168419c9f432
Reviewed-on: https://go-review.googlesource.com/c/go/+/390634
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The (temporary) highlights will make it easier to review the spec
in formatted form as opposed to html text.
Added a missing rule about the use of adjusted core types for
constraint type inference.
Adjusted rule for invalid embedding of interface types.
Change-Id: Ie573068d2307b66c937e803c486724175415b9c6
Reviewed-on: https://go-review.googlesource.com/c/go/+/385535
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change moves the relevant prose of the section on type parameters
into the section on type parameter lists and eliminates the former.
With this change, the section on types now exclusively describes all
Go composite types.
User-defined named types (defined types and type parameters) are
described with their declarations.
Change-Id: I3e421cd236e8801d31a4a81ff1e5ec9933e3ed20
Reviewed-on: https://go-review.googlesource.com/c/go/+/385037
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also, fixed several closing header tags and removed a duplicate "the".
(Thanks to @hopehook and Hossein Zolfi for pointing these out.)
Change-Id: I85a40ba44b8570a578bce8d211dcc5ea3901fb1e
Reviewed-on: https://go-review.googlesource.com/c/go/+/385036
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The outcome of type inference depends critically on when function
argument type inference stops processing arguments. Describe this
and explain an example with some detail.
Also: In the section on the built-in function delete, refer to the
value rather than the type of the second argument, as it may be an
untyped constant.
Change-Id: Ice7fbb33f985afe082380b8d37eaf763238a3818
Reviewed-on: https://go-review.googlesource.com/c/go/+/385034
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I6de236442f213ab4b4f19ec881add4923d8bfd8d
Reviewed-on: https://go-review.googlesource.com/c/go/+/385054
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Kevin Burke <kevin@burke.dev>
A basic interface is a classical Go interface containing only
methods or embedding basic interfaces.
Use this to simplify rule about what interfaces may be used
where. The term "basic interface" will also be useful when
talking about various interfaces in general.
Fix rule restricting union terms: as it was written it also
excluded interface terms with non-empty method sets due to
embedded non-interface types with methods.
Split the large section on interfaces into three smaller
pieces by introducing section titles.
Change-Id: I142a4d5609eb48aaa0f7800b5b85c1d6c0703fcb
Reviewed-on: https://go-review.googlesource.com/c/go/+/384994
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This makes the prose easier to read while being just as precise.
Change-Id: Ie46c6c5042f419de9fdeb1c75bb72b5a40c37073
Reviewed-on: https://go-review.googlesource.com/c/go/+/384774
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
This change only shuffles sections for better organization; there
are no other changes except title and link adjustments.
Until now, the sections on underlying types and method sets were
immediately following the introduction of types. As it becomes
necessary to introduce the notion of a core type more centrally,
the natural place is immediately following the section on underlying
types. All together, these sections, immediately after the introduction
of types, would distract from purpose of the section on types, which
is to introduce the various types that Go offers.
The more natural place for the definition of underlying, core, and
specific types is the section on properties of types and values.
To accomplish this, the section on the structure of interfaces is
split into a section on core types and one on specific types, and
the various sections are reorganized appropriately.
The new organization of the section on types now simply introduces
all Go types as follows:
- boolean types
- numeric types
- string types
- array types
- slice types
- struct types
- pointer types
- function types
- interface types
- map types
- channel types
- type parameters
The new organization of the section on properties of types and values
is as follows:
- underlying types
- core types
- specific types
- type identity
- assignability
- representability
- method sets
Change-Id: I59e4d47571da9d4c89d47d777f5353fb1c5843e6
Reviewed-on: https://go-review.googlesource.com/c/go/+/384623
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Includes a few minor cosmetic changes.
Change-Id: I6c307d958b47d83671142688630ea7835168439f
Reviewed-on: https://go-review.googlesource.com/c/go/+/384622
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes#51110.
Change-Id: I11370417f1ef435b05dfab18eeabc2c3c1b7b8a1
Reviewed-on: https://go-review.googlesource.com/c/go/+/384674
Trust: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Add corresponding rules and a couple of examples.
Fixes#50202.
Change-Id: I4287b5e2d0fd29a0c871795e07f1bb529c9c6004
Reviewed-on: https://go-review.googlesource.com/c/go/+/384240
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This change in terminology prevents potential confusion
that migth be caused by associating "structural type"
with "structural typing"; the two are not connected.
Also, adjusted introductory paragraph of section on
constraint type inference: type inference goes in both
directions, from type parameter to core type and vice
versa. The previous description was not quite accurate.
Change-Id: If4ca300f525eea660f68486302619aa6ad5dbc2c
Reviewed-on: https://go-review.googlesource.com/c/go/+/384238
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The terms "integer type", "floating-point type", and "complex type"
are used frequently in the spec but are not explicitly (only indirectly)
defined.
Slightly rephrased the section on numeric types and introduce these
terms explicitly. Add links to this section.
Change-Id: I3fb888933bece047da8b356b684c855618e9aee4
Reviewed-on: https://go-review.googlesource.com/c/go/+/384157
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: Ic338788d6410ed0d09ad129811377ee9ce5ed496
Reviewed-on: https://go-review.googlesource.com/c/go/+/367954
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reverts CL 380854.
Per the conluding discussions on #50791. A follow-up will
document `comparable` more thoroughly.
For #50791.
Change-Id: I15db9051784a012f713e28d725c3b8bbfeb40569
Reviewed-on: https://go-review.googlesource.com/c/go/+/381076
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Mostly from CL 367954.
Change-Id: Id003b0f785a286a1a649e4d6e8c87d0418a36545
Reviewed-on: https://go-review.googlesource.com/c/go/+/379920
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Introduce a (local) notion of a set of representative types,
which serves as a representation/approximation of an
interface's actual type set. If the set of representative
types is is non-empty and finite, it corresponds to the set
of specific types of the interface.
In the implementation, the set of representative types serves
as a finite representation of an interface's type set, together
with the set of methods.
Change-Id: Ib4c6cd5e17b81197672e4247be9737dd2cb6b56f
Reviewed-on: https://go-review.googlesource.com/c/go/+/376834
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Problem pointed out on golang-nuts mailing list.
Change-Id: If1c9b22e1ed7b4ec7ebcaadc80fa450333e6856c
Reviewed-on: https://go-review.googlesource.com/c/go/+/375799
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The new description matches the implementation (CL 370774).
Also, in the section on type constraints, use "defines" instead of
"determines" because the constraint interface defines the type set
which is precisely the set of acceptable type arguments.
For #49482.
Change-Id: I6f30f49100e8ba8bec0a0f1b450f88cae54312eb
Reviewed-on: https://go-review.googlesource.com/c/go/+/372874
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
For #49602.
Change-Id: I0d3ff8f087dffb3409918494147fd1dceff7514d
Reviewed-on: https://go-review.googlesource.com/c/go/+/372694
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
As written, the conversion P(x), where P and the type
of x are type parameters with identical underlying types
(i.e., identical constraints), is valid. However, unless
the type of x and P are identical (which is covered with
the assignability rule), such a conversion is not valid
in general (consider the case where both type parameters
are different type parameters with constraint "any").
This change adjusts the rules to prohibit type parameters
in this case. The same reasoning applies and the analogue
change is made for pointer types.
The type checker already implements these updated rules.
Change-Id: Id90187900cb2820f6a0a0cf582cf26cdf8addbce
Reviewed-on: https://go-review.googlesource.com/c/go/+/371074
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I562d4648756e710020ee491f3801896563a89baa
Reviewed-on: https://go-review.googlesource.com/c/go/+/367395
Trust: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
We want to support some special cases for index expressions, len, and
cap on operands of type parameters (such as indexing a value constrained
by byte slices and strings), hence the extra rules.
Change-Id: I4a07dc7e64bb47361b021d606c52eae1784d5430
Reviewed-on: https://go-review.googlesource.com/c/go/+/366814
Trust: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Dan Scales <danscales@google.com>
- fix definition of "specific types" and add more examples
- state that a parameterized function must be instantiated
when used as a function value
- remove duplicate word ("can can" -> "can")
Thanks to @danscales for finding these.
Change-Id: Ideb41efc35a3e67694d3bc97e462454feae37c44
Reviewed-on: https://go-review.googlesource.com/c/go/+/367394
Trust: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
This change corrects the link `Instantiantions` to `Instantiations` in the spec.
Change-Id: Ib0ed03420ae401d20af1ea723c5487018b2f462d
GitHub-Last-Rev: b84316c818
GitHub-Pull-Request: golang/go#49816
Reviewed-on: https://go-review.googlesource.com/c/go/+/367274
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com>
Change-Id: I11111b3617673be94508128489aed6488d518537
Reviewed-on: https://go-review.googlesource.com/c/go/+/366834
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I5ffc7f26236487070447eaa0f6b14d1fab44c3c7
Reviewed-on: https://go-review.googlesource.com/c/go/+/366794
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I2770da87b4c977b51dfa046f2f08283917675e1c
Reviewed-on: https://go-review.googlesource.com/c/go/+/365916
Trust: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Change-Id: I7bfddf4be0d1d95419f312bb349ae2e16b74b795
Reviewed-on: https://go-review.googlesource.com/c/go/+/365915
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I3c4d8bdb5e92ee7fdca9593fb043f94f467755e8
Reviewed-on: https://go-review.googlesource.com/c/go/+/365434
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I4423a059527066c4418c195911f8184dfd3f5a15
Reviewed-on: https://go-review.googlesource.com/c/go/+/365914
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The notion of specific types will be used to define rules for
assignability, convertability, etc. when type parameters are
involved.
Change-Id: Ic5c134261e2a9fe05cdf25efd342f052458ab5c8
Reviewed-on: https://go-review.googlesource.com/c/go/+/366754
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Thanks to @danscales for noticing the mistake.
Change-Id: I547ee80a78419765b82d39d7b34dc8d3bf962c35
Reviewed-on: https://go-review.googlesource.com/c/go/+/366215
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
This change introduces the notion of a structural interface
and its corresponding structural type.
Change-Id: Ib5442dfd04cb5950b4467428cae51849f8922272
Reviewed-on: https://go-review.googlesource.com/c/go/+/365474
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
- add section on type parameters
- added two sections on the scope of type parameters
- expanded general section on types accordingly
- introduced the notion of a named type which will
help in simplifying various rules (subsequent CLs)
Change-Id: I49c1ed7d6d4f951d751f0a3ca5dfb637e49829f2
Reviewed-on: https://go-review.googlesource.com/c/go/+/365414
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I29e9188a0fa1326c2755a9b86aeb47feaa8019be
Reviewed-on: https://go-review.googlesource.com/c/go/+/365274
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
- fixed a typo in the method set section
- express in the syntax that ~T denotes an underlying type
- be more precise when talking about types vs type terms
- refer to "unions" rather than "union expressions"
- make it clear in the spec title that this is WIP
Change-Id: I9b2c4b1f77bc50dd574ed6893bedd40529c320fc
Reviewed-on: https://go-review.googlesource.com/c/go/+/365154
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is the first of several CLs that update the existing
Go 1.17 spec for type parameters.
This CL updates the section on method sets and interface types.
It also adds "any", "comparable" to the list of predeclared
identifiers.
Change-Id: I0ce25dc02791c33150c0d949528512610faf3eab
Reviewed-on: https://go-review.googlesource.com/c/go/+/362999
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
