It was being rejected. Now it isn't and can be used in the runtime.
Change-Id: I4626bf9fc2e0bc26fffb87d11bede459964324b3
Reviewed-on: https://go-review.googlesource.com/c/go/+/292129
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Both asmcgocall and systemstack need to save the calling Go code's
context for use by traceback, but they do it differently.
Systemstack's appraoch is better, because it doesn't require a
special case in traceback.
So make them both use that.
While we are here, the fake mstart caller in systemstack is
no longer needed and can be removed.
(traceback knows to stop in systemstack because of the writes to SP.)
Also remove the fake mstarts in sys_windows_*.s.
And while we are there, fix the control flow guard code in sys_windows_arm.s.
The current code is using pointers to a stack frame that technically is gone
once we hit the RET instruction. Clearly it's working OK, but better not to depend
on data below SP being preserved, even for just a few instructions.
Store the value we need in other registers instead.
(This code is only used for pushing a sigpanic call, which does not
actually return to the site of the fault and therefore doesn't need to
preserve any of the registers.)
This CL is part of a stack adding windows/arm64
support (#36439), intended to land in the Go 1.17 cycle.
This CL is, however, not windows/arm64-specific.
It is cleanup meant to make the port (and future ports) easier.
Change-Id: Id1e3ef5e54f7ad786e4b87043f2626eba7c3bbd9
Reviewed-on: https://go-review.googlesource.com/c/go/+/288799
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Large enum sets should be sorted by name when the
values don't matter, as they don't here. Do that.
Also replace the large switch with a map lookup.
This CL is part of a stack adding windows/arm64
support (#36439), intended to land in the Go 1.17 cycle.
This CL is, however, not windows/arm64-specific.
It is cleanup meant to make the port (and future ports) easier.
Change-Id: Ibe727b5d8866bf4c40c96020e1f4632bde7efd59
Reviewed-on: https://go-review.googlesource.com/c/go/+/288798
Trust: Russ Cox <rsc@golang.org>
Trust: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This can happen on Windows when recording profile samples for system threads.
This CL is part of a stack adding windows/arm64
support (#36439), intended to land in the Go 1.17 cycle.
This CL is, however, not windows/arm64-specific.
It is cleanup meant to make the port (and future ports) easier.
Change-Id: I5a7ba32b1900a69f3b7acada9cb6cf8396d8a03f
Reviewed-on: https://go-review.googlesource.com/c/go/+/288797
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The default GOROOT has nothing to do with system details.
Move it next to its one use in package runtime.
This CL is part of a stack adding windows/arm64
support (#36439), intended to land in the Go 1.17 cycle.
This CL is, however, not windows/arm64-specific.
It is cleanup meant to make the port (and future ports) easier.
Change-Id: I1a601fad6335336b4616b834bb21bd8437ee1313
Reviewed-on: https://go-review.googlesource.com/c/go/+/288796
Trust: Russ Cox <rsc@golang.org>
Trust: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Document what the values in internal/sys mean.
Remove various special cases for arm64 in the code using StackAlign.
Delete Uintreg - it was for GOARCH=amd64p32,
which was specific to GOOS=nacl and has been retired.
This CL is part of a stack adding windows/arm64
support (#36439), intended to land in the Go 1.17 cycle.
This CL is, however, not windows/arm64-specific.
It is cleanup meant to make the port (and future ports) easier.
Change-Id: I40e8fa07b4e192298b6536b98a72a751951a4383
Reviewed-on: https://go-review.googlesource.com/c/go/+/288795
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is dead code and need not be ported to each architecture.
This CL is part of a stack adding windows/arm64
support (#36439), intended to land in the Go 1.17 cycle.
This CL is, however, not windows/arm64-specific.
It is cleanup meant to make the port (and future ports) easier.
Change-Id: I2d0072b377f73e49d7158ea304670c26f5486c59
Reviewed-on: https://go-review.googlesource.com/c/go/+/288794
Trust: Russ Cox <rsc@golang.org>
Trust: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
During a cgocallback, the runtime calls needm to get an m.
The calls made during needm cannot themselves assume that
there is an m or a g (which is attached to the m).
In the old days of making direct system calls, the only thing
you had to do for such functions was mark them //go:nosplit,
to avoid the use of g in the stack split prologue.
But now, on operating systems that make system calls through
shared libraries and use code that saves state in the g or m
before doing so, it's not safe to assume g exists. In fact, it is
not even safe to call getg(), because it might fault deferencing
the TLS storage to find the g pointer (that storage may not be
initialized yet, at least on Windows, and perhaps on other systems
in the future).
The specific routines that are problematic are usleep and osyield,
which are called during lock contention in lockextra, called
from needm.
All this is rather subtle and hidden, so in addition to fixing the
problem on Windows, this CL makes the fact of not running on
a g much clearer by introducing variants usleep_no_g and
osyield_no_g whose names should make clear that there is no g.
And then we can remove the various sketchy getg() == nil checks
in the existing routines.
As part of this cleanup, this CL also deletes onosstack on Windows.
onosstack is from back when the runtime was implemented in C.
It predates systemstack but does essentially the same thing.
Instead of having two different copies of this code, we can use
systemstack consistently. This way we need not port onosstack
to each architecture.
This CL is part of a stack adding windows/arm64
support (#36439), intended to land in the Go 1.17 cycle.
This CL is, however, not windows/arm64-specific.
It is cleanup meant to make the port (and future ports) easier.
Change-Id: I3352de1fd0a3c26267c6e209063e6e86abd26187
Reviewed-on: https://go-review.googlesource.com/c/go/+/288793
Trust: Russ Cox <rsc@golang.org>
Trust: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
We print things like “exit status 3221225477”
but the standard Windows form is 0xc0000005.
This CL is part of a stack adding windows/arm64
support (#36439), intended to land in the Go 1.17 cycle.
This CL is, however, not windows/arm64-specific.
It is cleanup meant to make the port (and future ports) easier.
Change-Id: Iefe447d4d1781b53bef9619f68d386f2866b2934
Reviewed-on: https://go-review.googlesource.com/c/go/+/288792
Trust: Russ Cox <rsc@golang.org>
Trust: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I4dcaca1f2e67ee32f70c22b2efa586232ca519bb
Reviewed-on: https://go-review.googlesource.com/c/go/+/293958
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
A type may now have a type param in it, either because it has been
composed from a function type param, or it has been declared as or
derived from a reference to a generic type. No objects or types with
type params can be exported yet. No generic type has a runtime
descriptor (but will likely eventually be associated with a dictionary).
types.Type now has an RParam field, which for a Named type can specify
the type params (in order) that must be supplied to fully instantiate
the type. Also, there is a new flag HasTParam to indicate if there is
a type param (TTYPEPARAM) anywhere in the type.
An instantiated generic type (whether fully instantiated or
re-instantiated to new type params) is a defined type, even though there
was no explicit declaration. This allows us to handle recursive
instantiated types (and improves printing of types).
To avoid the need to transform later in the compiler, an instantiation
of a method of a generic type is immediately represented as a function
with the method as the first argument.
Added 5 tests on generic types to test/typeparams, including list.go,
which tests recursive generic types.
Change-Id: Ib7ff27abd369a06d1c8ea84edc6ca1fd74bbb7c2
Reviewed-on: https://go-review.googlesource.com/c/go/+/292652
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Dan Scales <danscales@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Merge List:
+ 2021-02-18 eb982727e3 cmd/go/internal/mvs: fix Downgrade to match Algorithm 4
+ 2021-02-18 3b7277d365 cmd/go: add a script test for artifacts resulting from 'go get -u'
+ 2021-02-18 f3c2208e2c cmd/go: add script tests for potential upgrades due to downgrades
+ 2021-02-18 a5c8a15f64 cmd/go/internal/mvs: clarify and annotate test cases
+ 2021-02-18 a76efea1fe cmd/go/internal/mvs: don't emit duplicates from Req
+ 2021-02-18 609d82b289 cmd/dist: set GOARM=7 for windows/arm
+ 2021-02-18 f0be3cc547 runtime: unbreak linux/riscv64 following regabi merge
+ 2021-02-18 07ef313525 runtime/cgo: add cast in C code to avoid C compiler warning
Change-Id: I8e58ad1e82a9ea313a99c1b11df5b341f80680d4
mvs.Downgrade is pretty clearly intended to match Algorithm 4 from the
MVS blog post (https://research.swtch.com/vgo-mvs#algorithm_4).
Per the blog post:
“Downgrading one module may require downgrading other modules, but we
want to downgrade as few other modules as possible. … To avoid an
unnecessary downgrade to E 1.1, we must also add a new requirement on
E 1.2. We can apply Algorithm R to find the minimal set of new
requirements to write to go.mod.”
mvs.Downgrade does not match that behavior today: it fails to retain
the selected versions of transitive dependencies that are not implied
by downgraded direct dependencies of the target (module E in the
post). This bug is currently masked by the fact that we only call
Downgrade today with a *modload.mvsReqs, for which the Required method
happens to return the complete build list — rather than only the
direct dependencies as documented for the mvs.Reqs interface.
For #36460
Change-Id: If9c8f413b156b5f67c02787d9359394e169951b0
Reviewed-on: https://go-review.googlesource.com/c/go/+/287633
Trust: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
For #36460
Change-Id: I4f8bf0fb8dfa508b346acb3868302452409ee9da
Reviewed-on: https://go-review.googlesource.com/c/go/+/289696
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
The changes between (equivalent, and reviewed) go/types/typestring_test.go
and typestring_test.go can be seen by comparing patchset 1 and 2. The actual
change is just removing the "// UNREVIEWED" marker.
Change-Id: I66150c0ab738763d2d8b94483ef8314cbe28a374
Reviewed-on: https://go-review.googlesource.com/c/go/+/293473
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
The changes between (equivalent, and reviewed) go/types/typestring.go
and typestring.go can be seen by comparing patchset 1 and 3. The actual
change is just removing the "// UNREVIEWED" marker plus an adjustment
to writeTParamList (we now always write type constraints).
Change-Id: Ieb109c17756addc954e1ca0da606fa5b335ff30d
Reviewed-on: https://go-review.googlesource.com/c/go/+/293472
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
The changes between (equivalent, and reviewed) go/types/type.go
and type.go can be seen by comparing patchset 1 and 3. The actual
change is just removing the "// UNREVIEWED" marker and some
comment adjustments.
Change-Id: Ied0e2f942bc96a9fcae0466761cfaa60a87668db
Reviewed-on: https://go-review.googlesource.com/c/go/+/293471
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This removes the need for the aType embedded type and brings the types2.Type
API in sync with the go/types.Type API.
For reasons not fully understood yet, introducing the new under function
causes a very long initialization cycle error, which doesn't exist in
go/types. For now, circumvent the problem through a helper function variable.
This CL also eliminates superflous (former) Under() method calls
inside optype calls (optype takes care of this).
Plus some minor misc. cleanups and comment adjustments.
Change-Id: I86e13ccf6f0b34d7496240ace61a1c84856b6033
Reviewed-on: https://go-review.googlesource.com/c/go/+/293470
Reviewed-by: Robert Findley <rfindley@google.com>
Trust: Robert Griesemer <gri@golang.org>
This removes two more converter methods in favor of functions.
This further reduces the API surface of types2.Type and matches
the approach taken in go/types.
Change-Id: I3cdd54c5e0d1e7664a69f3697fc081a66315b969
Reviewed-on: https://go-review.googlesource.com/c/go/+/293292
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
This change replaces methods with functions to reduce the API surface of
types2.Type and to match the approach taken in go/types. The converter
methods for Named and TypeParam will be addressed in a follow-up CL.
Also: Fixed behavior of optype to return the underlying type for
arguments that are not type parameters.
Change-Id: Ia369c796754bc33bbaf0c9c8478badecb729279b
Reviewed-on: https://go-review.googlesource.com/c/go/+/293291
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Findley <rfindley@google.com>
Modify go/parser to consistently represent type instantiation as an
ast.IndexExpr, rather than use an ast.CallExpr (with Brackets:true) for
instantiations with multiple type parameters. To enable this, introduce
a new ast expr type: ListExpr.
This brings go/types in line with types2, with the exception of a small
change to funcInst to eliminate redundant errors if values are
erroneously used as types. In a subsequent CL, call.go and expr.go will
be marked as reviewed.
This also catches some type instance syntax using '()' that was
previously accepted incorrectly. Tests are updated accordingly.
Change-Id: I30cd0181c7608f1be7486a9a8b63df993b412e85
Reviewed-on: https://go-review.googlesource.com/c/go/+/293010
Trust: Robert Findley <rfindley@google.com>
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
For #36460
Change-Id: I1620c23819263ef82e571fc4d4c778277842c02d
Reviewed-on: https://go-review.googlesource.com/c/go/+/288535
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
For #36460
Change-Id: I5a8be8f36fb8825ffa08ed1427cb1e15b106b31a
Reviewed-on: https://go-review.googlesource.com/c/go/+/287732
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
Reviewed-by: Michael Matloob <matloob@golang.org>
Req is supposed to return “a minimal requirement list”
that includes each of the module paths listed in base.
Currently, if base contains duplicates Req emits duplicates,
and a list containing duplicates is certainly not minimal.
That, in turn, requires callers to be careful to deduplicate the base
slice, and there are multiple callers that are already quite
complicated to reason about even without the added complication of
deduplicating slices.
For #36460
Change-Id: I391a1dc0641fe1dd424c16b7a1082da0d00c7292
Reviewed-on: https://go-review.googlesource.com/c/go/+/287632
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
GOARM=6 executables fail to launch on windows/arm, so set this to ARMv7
like we do for Android.
This CL is part of a stack adding windows/arm64
support (#36439), intended to land in the Go 1.17 cycle.
Change-Id: Ifa13685e7ab6edd367f3dfec10296e376319dbd4
Reviewed-on: https://go-review.googlesource.com/c/go/+/291629
Reviewed-by: Russ Cox <rsc@golang.org>
Trust: Jason A. Donenfeld <Jason@zx2c4.com>
Run-TryBot: Jason A. Donenfeld <Jason@zx2c4.com>
TryBot-Result: Go Bot <gobot@golang.org>
This is a port of CL 290471 to go/types. However, this change preserves
the existing check for constant types in recordTypeAndValue, which uses
is(..., isConstType) rather than the isConstType predicate. In types2,
this code path is not hit with type parameters because convertUntyped
walks the type list in order before calling updateExprType with the type
parameter, at which point the expression type would have already been
recorded as the first element of the type list -- probably something
that should be corrected.
Longer term, I believe we actually could allow const type parameters if
the optype is a sum of constant types.
Change-Id: Iaa91ffa740b5f08a5696bd96918a866bffd7aef6
Reviewed-on: https://go-review.googlesource.com/c/go/+/291323
Trust: Robert Findley <rfindley@google.com>
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Unbreak the linux/riscv64 port by storing the zero value register to memory,
rather than the current code that is moving a zero intermediate to the stack
pointer register (ideally this should be caught by the assembler). This was
broken in CL#272568.
On riscv64 a zero immediate value cannot be moved directly to memory, rather
a register needs to be loaded with zero and then stored. Alternatively, the
the zero value register (aka X0) can be used directly.
Change-Id: Id57121541d50c9993cec5c2270b638b184ab9bc1
Reviewed-on: https://go-review.googlesource.com/c/go/+/292894
Trust: Joel Sing <joel@sing.id.au>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Fixes#44340
Change-Id: Id80dd1f44a988b653933732afcc8e49a826affc4
Reviewed-on: https://go-review.googlesource.com/c/go/+/293209
Reviewed-by: Andrew G. Morgan <agm@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
This was a mostly clean merge, with the exception of codereview.cfg and
changes in src/go/types.
codereview.cfg for dev.typeparams is preserved in this CL. It should be
deleted before merging back to master.
The go/types changes were merged manually. For the most part this
involved taking the union of patches, with the following exceptions:
+ declInfo.aliasPos is removed, as it is not necessary in
dev.typeparams where we have access to the full TypeSpec.
+ Checker.overflow is updated to use the asBasic converter.
+ A TODO is added to errorcodes.go to ensure that go1.16 error codes
are preserved.
Change-Id: If9595196852e2163e27a9478df1e7b2c3704947d
Disable -G=3 tests on the std go tests, in order to see if -G=3 is
causing the flakiness for the dev.typeparams builder, as opposed to
other changes in typeparams branch. It's possible that -G=3 is using
more CPU/RAM that causes flakiness, as opposed to more specific bugs.
Change-Id: I610bce2aabd26b2b1fddc5e63f85ffe4e958e0d8
Reviewed-on: https://go-review.googlesource.com/c/go/+/292850
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Dan Scales <danscales@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
This reverts commit CL 289712 (afd67f3). It breaks x/tools tests, and
those tests highlight that perhaps I didn't think through the
repercussions of this change as much as I should have.
Fixes#44316
Change-Id: I5db39b4e2a3714131aa22423abfe0f34a0376192
Reviewed-on: https://go-review.googlesource.com/c/go/+/292751
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Turns out that file is not formatted properly in the dev.regabi
branch.
Change-Id: I93125e65d5d3e8448c6ec1f077332c9bf7f0dd26
Reviewed-on: https://go-review.googlesource.com/c/go/+/292594
Trust: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
This CL merges the dev.regabi branch to the master branch.
In the dev.regabi branch we have refactored the compiler, and laid
some preliminary work for enabling a register-based ABI (issue #40724),
including improved late call/return lowering, improved ABI wrapper
generation, reflect call prepared for the new ABI, and reserving
special registers in the internal ABI. The actual register-based ABI
has not been enabled for the moment. The ABI-related changes are behind
GOEXPERIMENT=regabi and currently off by default.
Updates #40724, #44222.
Fixes#44224.
Change-Id: Id5de9f734d14099267ab717167aaaeef31fdba70
Currently, we call Warnl in SSA backend when we see a function
(defined or called) with regparams pragma. Calling Warnl in
concurrent environment is racy. As the debugging output is
temporary, for testing purposes we just pass -c=1. We'll remove
the pragma and the debugging print some time soon.
Change-Id: I6f925a665b953259453fc458490c5ff91f67c91a
Reviewed-on: https://go-review.googlesource.com/c/go/+/291710
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
The internal/abi package is used by runtime and needs to be
copied.
Fix longtest builders.
Change-Id: I7a962df3db2c6bf68cc6a7da74b579f381920009
Reviewed-on: https://go-review.googlesource.com/c/go/+/292592
Reviewed-by: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
(The corresponding update for the last release cycle was CL 248038.)
For #40705.
Change-Id: I13becdc4c3718a1c6986876ec56879cce3bcb34f
Reviewed-on: https://go-review.googlesource.com/c/go/+/275297
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
This is an exact port of CL 290911 to go/types.
For #31793
Change-Id: I28c42727735f467a5984594b455ca58ab3375591
Reviewed-on: https://go-review.googlesource.com/c/go/+/291319
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This is a port of CL 289570 to go/types. It has some notable differences
with that CL:
+ A new _BadDecl error code is added, to indicate declarations with bad
syntax.
+ declInfo is updated hold not an 'alias' bool, but an aliasPos
token.Pos to identify the location of the type aliasing '=' token.
This allows for error messages to be accurately placed on the '='
For #31793
Change-Id: Ib15969f9cd5be30228b7a4c6406f978d6fc58018
Reviewed-on: https://go-review.googlesource.com/c/go/+/291318
Trust: Robert Findley <rfindley@google.com>
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Currently these two functions assume that constants in internal/abi are
set correctly, but we actually just made them zero if
GOEXPERIMENT_REGABI is set. This means reflectcall is broken. Fix it by
stubbing out these routines even if GOEXPERIMENT_REGABI is set.
Change-Id: I4c8df6d6af28562c5bb7b85f48c03d37daa9ee0d
Reviewed-on: https://go-review.googlesource.com/c/go/+/292650
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
This change sets the register count constants to zero for the
GOEXPERIMENT regabi because currently the users of it (i.e. reflect)
will be broken, since they expect Go functions that implement the new
ABI.
Change-Id: Id3e874c61821a36605eb4e1cccdee36a2759f303
Reviewed-on: https://go-review.googlesource.com/c/go/+/292649
Reviewed-by: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Fixes breakage accidentally introduced by https://golang.org/cl/291711.
Fixes#44295
Change-Id: I76f3e5577d1d24027d4ed2a725b5b749ab2d059c
Reviewed-on: https://go-review.googlesource.com/c/go/+/292629
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The runtime imports the internal/abi package. Recognize
internal/abi as a runtime dependent, to make trampoline generation
algorithm work.
Fix ARM build.
Change-Id: I26b6778aa41dcb959bc226ff04abe08a5a82c4f6
Reviewed-on: https://go-review.googlesource.com/c/go/+/292610
Reviewed-by: Than McIntosh <thanm@google.com>
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Currently, in the trampoline generation pass we expect packages
are laid out in dependency order, so a cross-package jump always
has a known target address so we can check if a trampoline is
needed. With linknames, there can be cycles in the package
dependency graph, making this algorithm no longer work. For them,
as the target address is unkown we conservatively generate a
trampoline. This may generate unnecessary trampolines (if the
packages turn out laid together), but package cycles are extremely
rare so this is fine.
Updates #44073.
Change-Id: I2dc2998edacbda27d726fc79452313a21d07787a
Reviewed-on: https://go-review.googlesource.com/c/go/+/292490
Trust: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
The package documentation referenced sample metadata that was removed in CL 282632. Update this documentation to be less specific
about what metadata is available.
Additionally, the documentation on the Sample type referred to Descriptions instead of All as the source of metrics names.
Fixes#44280.
Change-Id: I24fc63a744bf498cb4cd5bda56c1599f6dd75929
Reviewed-on: https://go-review.googlesource.com/c/go/+/292309
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Trust: Michael Knyszek <mknyszek@google.com>
Trust: Dmitri Shuralyov <dmitshur@golang.org>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Fixes#40700.
Change-Id: I99ed479d1bb3cdf469c0209720c728276182a7a9
Reviewed-on: https://go-review.googlesource.com/c/go/+/291809
Reviewed-by: Alexander Rakoczy <alex@golang.org>
Reviewed-by: Carlos Amedee <carlos@golang.org>
Trust: Alexander Rakoczy <alex@golang.org>
Run-TryBot: Alexander Rakoczy <alex@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
This change adds support for the new register ABI on amd64 to
reflect.(Value).Call. If internal/abi's register counts are non-zero,
reflect will try to set up arguments in registers on the Call path.
Note that because the register ABI becomes ABI0 with zero registers
available, this should keep working as it did before.
This change does not add any tests for the register ABI case because
there's no way to do so at the moment.
For #40724.
Change-Id: I8aa089a5aa5a31b72e56b3d9388dd3f82203985b
Reviewed-on: https://go-review.googlesource.com/c/go/+/272568
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
