Currently the GC triggering condition is an awkward combination of the
gcMode (whether or not it's gcBackgroundMode) and a boolean
"forceTrigger" flag.
Replace this with a new gcTrigger type that represents the range of
transition predicates we need. This has several advantages:
1. We can remove the awkward logic that affects the trigger behavior
based on the gcMode. Now gcMode purely controls whether to run a
STW GC or not and the gcTrigger controls whether this is a forced
GC that cannot be consolidated with other GC cycles.
2. We can lift the time-based triggering logic in sysmon to just
another type of GC trigger and move the logic to the trigger test.
3. This sets us up to have a cycle count-based trigger, which we'll
use to make runtime.GC trigger concurrent GC with the desired
consolidation properties.
For #18216.
Change-Id: If9cd49349579a548800f5022ae47b8128004bbfc
Reviewed-on: https://go-review.googlesource.com/37516
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently sysmon triggers periodic GC if GC is not currently running
and it's been long enough since the last GC. This misses some
important conditions; for example, whether GC is enabled at all by
GOGC. As a result, if GOGC is off, once we pass the timeout for
periodic GC, sysmon will attempt to trigger a GC every 10ms. This GC
will be a no-op because gcStart will check all of the appropriate
conditions and do nothing, but it still goes through the motions of
waking the forcegc goroutine and printing a gctrace line.
Fix this by making sysmon call gcShouldStart to check *all* of the
appropriate transition conditions before attempting to trigger a
periodic GC.
Fixes#19247.
Change-Id: Icee5521ce175e8419f934723849853d53773af31
Reviewed-on: https://go-review.googlesource.com/37515
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently the heap profile is flushed by *either* gcSweep in STW mode
or by gcMarkTermination in concurrent mode. Simplify this by making
gcMarkTermination always flush the heap profile and by making gcSweep
do one extra flush (instead of two) in STW mode.
Change-Id: I62147afb2a128e1f3d92ef4bb8144c8a345f53c4
Reviewed-on: https://go-review.googlesource.com/37715
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently we snapshot the heap profile just *after* mark termination
starts the world because it's a relatively expensive operation.
However, this means any alloc or free events that happen between
starting the world and snapshotting the heap profile can be accounted
to the wrong cycle. In the worst case, a free can be accounted to the
cycle before the alloc; if the heap is small, this can result
temporarily in a negative "in use" count in the profile.
Fix this without making STW more expensive by using a global heap
profile cycle counter. This lets us split up the operation into a two
parts: 1) a super-cheap snapshot operation that simply increments the
global cycle counter during STW, and 2) a more expensive cleanup
operation we can do after starting the world that frees up a slot in
all buckets for use by the next heap profile cycle.
Fixes#19311.
Change-Id: I6bdafabf111c48b3d26fe2d91267f7bef0bd4270
Reviewed-on: https://go-review.googlesource.com/37714
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently memRecord has the same set of four fields repeated three
times. Pull these into a type and use this type three times. This
cleans up and simplifies the code a bit and will make it easier to
switch to a globally tracked heap profile cycle for #19311.
Change-Id: I414d15673feaa406a8366b48784437c642997cf2
Reviewed-on: https://go-review.googlesource.com/37713
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Every time I modify heap profiling, I find myself redrawing this
diagram, so add it to the comments. This shows how allocations and
frees are accounted, how we arrive at consistent profile snapshots,
and when those snapshots are published to the user.
Change-Id: I106aba1200af3c773b46e24e5f50205e808e2c69
Reviewed-on: https://go-review.googlesource.com/37514
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Now that we have a nice predicate system, improve the tests performed
by TestMemStats. We add some more non-zero checks (now that we force a
GC, things like NumGC must be non-zero), checks for trivial boolean
fields, and a few more range checks.
Change-Id: I6da46d33fa0ce5738407ee57d587825479413171
Reviewed-on: https://go-review.googlesource.com/37513
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently most TestMemStats failures dump the whole MemStats object if
anything is amiss without telling you what is amiss, or even which
field is wrong. This makes it hard to figure out what the actual
problem is.
Replace this with a reflection walk over MemStats and a map of
predicates to check. If one fails, we can construct a detailed and
descriptive error message. The predicates are a direct translation of
the current tests.
Change-Id: I5a7cafb8e6a1eeab653d2e18bb74e2245eaa5444
Reviewed-on: https://go-review.googlesource.com/37512
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
The `skip` argument passed to runtime.Caller and runtime.Callers should
be interpreted as the number of logical calls to skip (rather than the
number of physical stack frames to skip). This changes runtime.Callers
to skip inlined calls in addition to physical stack frames.
The result value of runtime.Callers is a slice of program counters
([]uintptr) representing physical stack frames. If the `skip` parameter
to runtime.Callers skips part-way into a physical frame, there is no
convenient way to encode that in the resulting slice. To avoid changing
the API in an incompatible way, our solution is to store the number of
skipped logical calls of the first frame in the _second_ uintptr
returned by runtime.Callers. Since this number is a small integer, we
encode it as a valid PC value into a small symbol called:
runtime.skipPleaseUseCallersFrames
For example, if f() calls g(), g() calls `runtime.Callers(2, pcs)`, and
g() is inlined into f, then the frame for f will be partially skipped,
resulting in the following slice:
pcs = []uintptr{pc_in_f, runtime.skipPleaseUseCallersFrames+1, ...}
We store the skip PC in pcs[1] instead of pcs[0] so that `pcs[i:]` will
truncate the captured stack trace rather than grow it for all i.
Updates #19348.
Change-Id: I1c56f89ac48c29e6f52a5d085567c6d77d499cf1
Reviewed-on: https://go-review.googlesource.com/37854
Run-TryBot: David Lazar <lazard@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
The result from CFBundleCopyResourceURL is owned by the caller. This
CL adds the necessary CFRelease to release it after use.
Fixes#19722
Change-Id: I7afe22ef241d21922a7f5cef6498017e6269a5c3
Reviewed-on: https://go-review.googlesource.com/38639
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
We reused the old C stack check mechanism for the implementation of
//go:systemstack, so when we execute a //go:systemstack function on a
user stack, the system fails by calling morestackc. However,
morestackc's message still talks about "executing C code".
Fix morestackc's message to reflect its modern usage.
Change-Id: I7e70e7980eab761c0520f675d3ce89486496030f
Reviewed-on: https://go-review.googlesource.com/38572
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
On Android, the thread local offset is found by looping through memory
starting at the TLS base address. The search is limited to
PTHREAD_KEYS_MAX, but issue 19472 made it clear that in some cases, the
slot is located further from the TLS base.
The limit is merely a sanity check in case our assumptions about the
thread-local storage layout are wrong, so this CL raises it to 384, which
is enough for the test case in issue 19472.
Fixes#19472
Change-Id: I89d1db3e9739d3a7fff5548ae487a7483c0a278a
Reviewed-on: https://go-review.googlesource.com/38636
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Clean up code that does interface equality. Avoid doing checks
in efaceeq/ifaceeq that we already did before calling those routines.
No noticeable performance changes for existing benchmarks.
name old time/op new time/op delta
EfaceCmpDiff-8 604ns ± 1% 553ns ± 1% -8.41% (p=0.000 n=9+10)
Fixes#18618
Change-Id: I3bd46db82b96494873045bc3300c56400bc582eb
Reviewed-on: https://go-review.googlesource.com/38606
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
The darwin linker for ARM does not allow PC-relative relocation
of external symbol in text section. Work around it by accessing
it indirectly: putting its address in a global variable (which is
not external), and accessing through that variable.
Fixes#19684.
Change-Id: I41361bbb281b5dbdda0d100ae49d32c69ed85a81
Reviewed-on: https://go-review.googlesource.com/38596
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Elias Naur <elias.naur@gmail.com>
Starting in go1.9, the minimum processor requirement for ppc64 is POWER8. This
means the checks for GOARCH_ppc64 in asm_ppc64x.s can be removed, since we can
assume LBAR and STBCCC instructions (both from ISA 2.06) will always be
available.
Updates #19074
Change-Id: Ib4418169cd9fc6f871a5ab126b28ee58a2f349e2
Reviewed-on: https://go-review.googlesource.com/38406
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The chanrecv funcs don't use it at all. The chansend ones do, but the
element type is now part of the hchan struct, which is already a
parameter.
hchan can be nil in chansend when sending to a nil channel, so when
instrumenting we must copy to the stack to be able to read the channel
type.
name old time/op new time/op delta
ChanUncontended 6.42µs ± 1% 6.22µs ± 0% -3.06% (p=0.000 n=19+18)
Initially found by github.com/mvdan/unparam.
Fixes#19591.
Change-Id: I3a5e8a0082e8445cc3f0074695e3593fd9c88412
Reviewed-on: https://go-review.googlesource.com/38351
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Removing stray xori that came from big endian copy/paste.
Adding atomicand8 check to runtime.check() that would have revealed
this error.
Might fix#19396.
Change-Id: If8d6f25d3e205496163541eb112548aa66df9c2a
Reviewed-on: https://go-review.googlesource.com/38257
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
I would like to use BenchmarkRunningGoProgram to measure
changes for issue #15588. So the program in the benchmark
should import "os" package.
It is also reasonable that basic Go program includes
"os" package.
For #15588.
Change-Id: Ida6712eab22c2e79fbe91b6fdd492eaf31756852
Reviewed-on: https://go-review.googlesource.com/37914
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This is a workaround for a FreeBSD kernel bug. It can be removed when
we are confident that all people are using the fixed kernel. See #15658.
Updates #15658.
Change-Id: I0ecdccb77ddd0c270bdeac4d3a5c8abaf0449075
Reviewed-on: https://go-review.googlesource.com/38325
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Mallocs and panics in the scavenge path are particularly nasty because
they're likely to silently self-deadlock on the mheap.lock. Avoid
sinking lots of time into debugging these issues in the future by
turning these into immediate throws.
Change-Id: Ib36fdda33bc90b21c32432b03561630c1f3c69bc
Reviewed-on: https://go-review.googlesource.com/38293
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
The lfstack API is still a C-style API: lfstacks all have unhelpful
type uint64 and the APIs are package-level functions. Make the code
more readable and Go-style by creating an lfstack type with methods
for push, pop, and empty.
Change-Id: I64685fa3be0e82ae2d1a782a452a50974440a827
Reviewed-on: https://go-review.googlesource.com/38290
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Implement math/bits.TrailingZerosX using intrinsics.
Generally reorganize the intrinsic spec a bit.
The instrinsics data structure is now built at init time.
This will make doing the other functions in math/bits easier.
Update sys.CtzX to return int instead of uint{64,32} so it
matches math/bits.TrailingZerosX.
Improve the intrinsics a bit for amd64. We don't need the CMOV
for <64 bit versions.
Update #18616
Change-Id: Ic1c5339c943f961d830ae56f12674d7b29d4ff39
Reviewed-on: https://go-review.googlesource.com/38155
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Currently, when printing tracebacks of other threads during
GOTRACEBACK=crash, if the thread is on the system stack we print only
the header for the user goroutine and fail to print its stack. This
happens because we passed the g0 to traceback instead of curg. The g0
never has anything set in its gobuf, so traceback doesn't print
anything.
Fix this by passing _g_.m.curg to traceback instead of the g0.
Fixes#19494.
Change-Id: Idfabf94d6a725e9cdf94a3923dead6455ef3b217
Reviewed-on: https://go-review.googlesource.com/38012
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
GOTRACEBACK=crash works by bouncing a SIGQUIT around the process
sched.mcount times. However, sched.mcount includes the extra Ms
allocated by oneNewExtraM for cgo callbacks. Hence, if there are any
extra Ms that don't have real OS threads, we'll try to send SIGQUIT
more times than there are threads to catch it. Since nothing will
catch these extra signals, we'll fall back to blocking for five
seconds before aborting the process.
Avoid this five second delay by subtracting out the number of extra Ms
when sending SIGQUITs.
Of course, in a cgo binary, it's still possible for the SIGQUIT to go
to a cgo thread and cause some other failure mode. This does not fix
that.
Change-Id: I4fbf3c52dd721812796c4c1dcb2ab4cb7026d965
Reviewed-on: https://go-review.googlesource.com/38182
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 32219 added precomputed sizeclass tables.
Remove the unused sizeToClass method which was previously only
called from initSizes.
Change-Id: I907bf9ed78430ecfaabbec7fca77ef2375010081
Reviewed-on: https://go-review.googlesource.com/38113
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
In FreeBSD when run Go proc under a given sub-list of
processors(e.g. 'cpuset -l 0 ./a.out' in multi-core system),
runtime.NumCPU() still return all physical CPUs from sysctl
hw.ncpu instead of account from sub-list.
Fix by use syscall cpuset_getaffinity to account the number of sub-list.
Fixes#15206
Change-Id: If87c4b620e870486efa100685db5debbf1210a5b
Reviewed-on: https://go-review.googlesource.com/29341
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Found by github.com/mvdan/unparam.
Change-Id: Iabcdfec2ae42c735aa23210b7183080d750682ca
Reviewed-on: https://go-review.googlesource.com/38030
Reviewed-by: Peter Weinberger <pjw@google.com>
Run-TryBot: Peter Weinberger <pjw@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
A typo in the previous revision ("act" instead of "oldact") caused us
to return the sa_flags from the new (or zeroed) sigaction rather than
the old one.
In the presence of a signal handler registered before
runtime.libpreinit, this caused setsigstack to erroneously zero out
important sa_flags (such as SA_SIGINFO) in its attempt to re-register
the existing handler with SA_ONSTACK.
Change-Id: I3cd5152a38ec0d44ae611f183bc1651d65b8a115
Reviewed-on: https://go-review.googlesource.com/37852
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
There are a few problems from change 35494, discovered during testing
of change 37852.
1. I was confused about the usage of n.key in the sema variant, so we
were looping on the wrong condition. The error was not caught by
the TryBots (presumably due to missing TSAN coverage in the BSD and
darwin builders?).
2. The sysmon goroutine sometimes skips notetsleep entirely, using
direct usleep syscalls instead. In that case, we were not calling
_cgo_yield, leading to missed signals under TSAN.
3. Some notetsleep calls have long finite timeouts. They should be
broken up into smaller chunks with a yield at the end of each
chunk.
updates #18717
Change-Id: I91175af5dea3857deebc686f51a8a40f9d690bcc
Reviewed-on: https://go-review.googlesource.com/37867
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
After benchmarking with a compiler modified to have better
spill location, it became clear that this method of checking
was actually faster on (at least) two different architectures
(ppc64 and amd64) and it also provides more timely interruption
of loops.
This change adds a modified FOR loop node "FORUNTIL" that
checks after executing the loop body instead of before (i.e.,
always at least once). This ensures that a pointer past the
end of a slice or array is not made visible to the garbage
collector.
Without the rescheduling checks inserted, the restructured
loop from this change apparently provides a 1% geomean
improvement on PPC64 running the go1 benchmarks; the
improvement on AMD64 is only 0.12%.
Inserting the rescheduling check exposed some peculiar bug
with the ssa test code for s390x; this was updated based on
initial code actually generated for GOARCH=s390x to use
appropriate OpArg, OpAddr, and OpVarDef.
NaCl is disabled in testing.
Change-Id: Ieafaa9a61d2a583ad00968110ef3e7a441abca50
Reviewed-on: https://go-review.googlesource.com/36206
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This helps systems that maintain an external database mapping
build ID to symbol information for the given binary, especially
in the case where /proc/self/maps lists many different files
(for example, many shared libraries).
Avoid importing debug/elf to avoid dragging in that whole
package (and its dependencies like debug/dwarf) into the
build of every program that generates a profile.
Fixes#19431.
Change-Id: I6d4362a79fe23e4f1726dffb0661d20bb57f766f
Reviewed-on: https://go-review.googlesource.com/37855
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently selectgo is just a wrapper around selectgoImpl. This keeps
the hard-coded frame skip counts for tracing the same between the
channel implementation and the select implementation.
However, this is fragile and confusing, so pass a skip parameter to
send and recv, join selectgo and selectgoImpl into one function, and
use decrease all of the skips in selectgo by one.
Change-Id: I11b8cbb7d805b55f5dc6ab4875ac7dde79412ff2
Reviewed-on: https://go-review.googlesource.com/37860
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
If the bad pointer is on a stack, this makes it possible to find the
frame containing the bad pointer.
Change-Id: Ieda44e054aa9ebf22d15d184457c7610b056dded
Reviewed-on: https://go-review.googlesource.com/37858
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This commit reworks multiway select statements to use normal control
flow primitives instead of the previous setjmp/longjmp-like behavior.
This simplifies liveness analysis and should prevent issues around
"returns twice" function calls within SSA passes.
test/live.go is updated because liveness analysis's CFG is more
representative of actual control flow. The case bodies are the only
real successors of the selectgo call, but previously the selectsend,
selectrecv, etc. calls were included in the successors list too.
Updates #19331.
Change-Id: I7f879b103a4b85e62fc36a270d812f54c0aa3e83
Reviewed-on: https://go-review.googlesource.com/37661
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
It's only ever called with the value it was using, but the code was
counterintuitive. Use the parameter instead, like the other funcs near
it.
Found by github.com/mvdan/unparam.
Change-Id: I45855e11d749380b9b2a28e6dd1d5dedf119a19b
Reviewed-on: https://go-review.googlesource.com/37893
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
For historical reasons, it's still commonplace to iterate over the
slice returned by runtime.Callers and call FuncForPC on each PC. This
is broken in gccgo and somewhat broken in gc and will become more
broken in gc with mid-stack inlining.
In Go 1.7, we introduced runtime.CallersFrames to deal with these
problems, but didn't strongly direct people toward using it. Reword
the documentation on runtime.Callers to more strongly encourage people
to use CallersFrames and explicitly discourage them from iterating
over the PCs or using FuncForPC on the results.
Fixes#19426.
Change-Id: Id0d14cb51a0e9521c8fdde9612610f2c2b9383c4
Reviewed-on: https://go-review.googlesource.com/37726
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Currently almost every function that deals with a *_func has to first
look up the *moduledata for the module containing the function's entry
point. This means we almost always do at least two identical module
lookups whenever we deal with a *_func (one to get the *_func and
another to get something from its module data) and sometimes several
more.
Fix this by making findfunc return a new funcInfo type that embeds
*_func, but also includes the *moduledata, and making all of the
functions that currently take a *_func instead take a funcInfo and use
the already-found *moduledata.
This transformation is trivial for the most part, since the *_func
type is usually inferred. The annoying part is that we can no longer
use nil to indicate failure, so this introduces a funcInfo.valid()
method and replaces nil checks with calls to valid.
Change-Id: I9b8075ef1c31185c1943596d96dec45c7ab5100f
Reviewed-on: https://go-review.googlesource.com/37331
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Currently we acquire a global lock for every newMarkBits call. This is
unfortunate since every span sweep operation calls newMarkBits.
However, most allocations are simply linear allocations from the
current arena. Take advantage of this to add a lock-free fast path for
allocating from the current arena. With this change, the global lock
only protects the lists of arenas, not the free offset in the current
arena.
Change-Id: I6cf6182af8492c8bfc21276114c77275fe3d7826
Reviewed-on: https://go-review.googlesource.com/34595
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently, newArena holds the gcBitsArenas lock across allocating
memory from the OS for a new gcBits arena. This is a global lock and
allocating physical memory can be expensive, so this has the potential
to cause high lock contention, especially since every single span
sweep operation calls newArena (via newMarkBits).
Improve the situation by temporarily dropping the lock across
allocation. This means the caller now has to revalidate its
assumptions after the lock is dropped, so this also factors out that
code path and reinvokes it after the lock is acquired.
Change-Id: I1113200a954ab4aad16b5071512583cfac744bdc
Reviewed-on: https://go-review.googlesource.com/34594
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Rick Hudson <rlh@golang.org>
Change-Id: I6343c162e27e2e492547c96f1fc504909b1c03c0
Reviewed-on: https://go-review.googlesource.com/37793
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently ReadMemStats stops the world for ~1.7 ms/GB of heap because
it collects statistics from every single span. For large heaps, this
can be quite costly. This is particularly unfortunate because many
production infrastructures call this function regularly to collect and
report statistics.
Fix this by tracking the necessary cumulative statistics in the
mcaches. ReadMemStats still has to stop the world to stabilize these
statistics, but there are only O(GOMAXPROCS) mcaches to collect
statistics from, so this pause is only 25µs even at GOMAXPROCS=100.
Fixes#13613.
Change-Id: I3c0a4e14833f4760dab675efc1916e73b4c0032a
Reviewed-on: https://go-review.googlesource.com/34937
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
The gcstats structure is no longer consumed by anything and no longer
tracks statistics that are particularly relevant to the concurrent
garbage collector. Remove it. (Having statistics is probably a good
idea, but these aren't the stats we need these days and we don't have
a way to get them out of the runtime.)
In preparation for #13613.
Change-Id: Ib63e2f9067850668f9dcbfd4ed89aab4a6622c3f
Reviewed-on: https://go-review.googlesource.com/34936
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Rick Hudson <rlh@golang.org>
The iOS test harness was recently changed in response to lldb bugs
to replace breakpoints with the SIGUSR2 signal (CL 34926), and to
pass the current directory in the test binary arguments (CL 35152).
Both the signal sending and working directory setup is done from
the go test driver.
However, the new method doesn't work with tests where a C program is
the test driver instead of go test: the current working directory
will not be changed and SIGUSR2 is not raised.
Instead of copying that logic into any C test program, rework the
test harness (again) to move the setup logic to the early runtime
cgo setup code. That way, the harness will run even in the library
build modes.
Then, use the app Info.plist file to pass the working
directory, removing the need to alter the arguments after running.
Finally, use the SIGINT signal instead of SIGUSR2 to avoid
manipulating the signal masks or handlers.
Fixes the testcarchive tests on iOS.
With this CL, both darwin/arm and darwin/arm64 passes all.bash.
This CL replaces CL 34926, CL 35152 as well as the fixup CL
35123 and CL 35255. They are reverted in CLs earlier in the
relation chain.
Change-Id: I8485c7db1404fbd8daa261efd1ea89e905121a3e
Reviewed-on: https://go-review.googlesource.com/36090
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
In order to generate accurate tracebacks, the runtime needs to know the
inlined call stack for a given PC. This creates two tables per function
for this purpose. The first table is the inlining tree (stored in the
function's funcdata), which has a node containing the file, line, and
function name for every inlined call. The second table is a PC-value
table that maps each PC to a node in the inlining tree (or -1 if the PC
is not the result of inlining).
To give the appearance that inlining hasn't happened, the runtime also
needs the original source position information of inlined AST nodes.
Previously the compiler plastered over the line numbers of inlined AST
nodes with the line number of the call. This meant that the PC-line
table mapped each PC to line number of the outermost call in its inlined
call stack, with no way to access the innermost line number.
Now the compiler retains line numbers of inlined AST nodes and writes
the innermost source position information to the PC-line and PC-file
tables. Some tools and tests expect to see outermost line numbers, so we
provide the OutermostLine function for displaying line info.
To keep track of the inlined call stack for an AST node, we extend the
src.PosBase type with an index into a global inlining tree. Every time
the compiler inlines a call, it creates a node in the global inlining
tree for the call, and writes its index to the PosBase of every inlined
AST node. The parent of this node is the inlining tree index of the
call. -1 signifies no parent.
For each function, the compiler creates a local inlining tree and a
PC-value table mapping each PC to an index in the local tree. These are
written to an object file, which is read by the linker. The linker
re-encodes these tables compactly by deduplicating function names and
file names.
This change increases the size of binaries by 4-5%. For example, this is
how the go1 benchmark binary is impacted by this change:
section old bytes new bytes delta
.text 3.49M ± 0% 3.49M ± 0% +0.06%
.rodata 1.12M ± 0% 1.21M ± 0% +8.21%
.gopclntab 1.50M ± 0% 1.68M ± 0% +11.89%
.debug_line 338k ± 0% 435k ± 0% +28.78%
Total 9.21M ± 0% 9.58M ± 0% +4.01%
Updates #19348.
Change-Id: Ic4f180c3b516018138236b0c35e0218270d957d3
Reviewed-on: https://go-review.googlesource.com/37231
Run-TryBot: David Lazar <lazard@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
There are two accesses to mheap_.busy that are guarded by checks
against len(mheap_.free). This works because both lists are (and must
be) the same length, but it makes the code less clear. Change these to
use len(mheap_.busy) so the access more clearly parallels the check.
Fixes#18944.
Change-Id: I9bacbd3663988df351ed4396ae9018bc71018311
Reviewed-on: https://go-review.googlesource.com/36354
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently sweep counts the number of allocated objects, computes the
number of free objects from that, then re-computes the number of
allocated objects from that. Simplify and clean this up by skipping
these intermediate steps.
Change-Id: I3ed98e371eb54bbcab7c8530466c4ab5fde35f0a
Reviewed-on: https://go-review.googlesource.com/34935
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Marvin Stenger <marvin.stenger94@gmail.com>
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently we scan the finalizers queue both during concurrent mark and
during mark termination. This costs roughly 20ns per queued finalizer
and about 1ns per unused finalizer queue slot (allocated queue length
never decreases), which can drive up STW time if there are many
finalizers.
However, we only add finalizers to this queue during sweeping, which
means that the second scan will never find anything new. Hence, we can
fix this by simply not scanning the finalizers queue during mark
termination. This brings the STW time under the 100µs goal even with
1,000,000 queued finalizers.
Fixes#18869.
Change-Id: I4ce5620c66fb7f13ebeb39ca313ce57047d1d0fb
Reviewed-on: https://go-review.googlesource.com/36013
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Since workbuf is now marked go:notinheap, the write barrier-preventing
wrapper type wbufptr is no longer necessary. Remove it.
Change-Id: I3e5b5803a1547d65de1c1a9c22458a38e08549b7
Reviewed-on: https://go-review.googlesource.com/35971
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Some debugging code was recently added to:
1) provide more detail for the stale reason when it is
determined that a package is stale
2) provide file and package time and date information when
it is determined that runtime.a is stale
This backs out those those debugging messages.
Fixes#19116
Change-Id: I8dd0cbe29324820275b481d8bbb78ff2c5fbc362
Reviewed-on: https://go-review.googlesource.com/37382
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The comments in cmd/internal/obj/funcdata.go are identical to the
comments in runtime/funcdata.h, but the majority of the definitions
they refer to don't apply to Go sources and have been stripped out of
funcdata.go.
Remove these stale comments from funcdata.go and clean up the
references to other copies of the PCDATA and FUNCDATA indexes.
Change-Id: I5d6e49a6e586cc9aecd7c3ce1567679f2a605884
Reviewed-on: https://go-review.googlesource.com/37330
Reviewed-by: Keith Randall <khr@golang.org>
These functions are not defined and are not used.
Fixes#19290
Change-Id: I2978147220af83cf319f7439f076c131870fb9ee
Reviewed-on: https://go-review.googlesource.com/37448
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If the caller passes a large number to Profile.Add,
the list of pcs is empty, which results in junk
(a nil pc) being recorded. Check for that explicitly,
and replace such stack traces with a lostProfileEvent.
Fixes#18836.
Change-Id: I99c96aa67dd5525cd239ea96452e6e8fcb25ce02
Reviewed-on: https://go-review.googlesource.com/36891
Reviewed-by: Russ Cox <rsc@golang.org>
The profiles are self-contained now.
Check that they work by themselves in the tests that invoke pprof,
but also keep checking that the old command lines work.
Change-Id: I24c74b5456f0b50473883c3640625c6612f72309
Reviewed-on: https://go-review.googlesource.com/37166
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
The existing code builds a full profile in memory.
Then it translates that profile into a data structure (in memory).
Then it marshals that data structure into a protocol buffer (in memory).
Then it gzips that marshaled form into the underlying writer.
So there are three copies of the full profile data in memory
at the same time before we're done. This is obviously dumb.
This CL implements a fully streaming conversion from
the original in-memory profile to the underlying writer.
There is now only one copy of the profile in memory.
For the non-CPU profiles, this is optimal, since we have to
have a full copy in memory to start with.
For the CPU profiles, we could still try to bound the profile
size stored in memory and stream fragments out during
the actual profiling, as Go 1.7 did (with a simpler format),
but so far that hasn't been necessary.
Change-Id: Ic36141021857791bf0cd1fce84178fb5e744b989
Reviewed-on: https://go-review.googlesource.com/37164
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
The old hash table was a place holder that allocates memory
during every lookup for key generation, even for keys that hit
in the the table.
Change-Id: I4f601bbfd349f0be76d6259a8989c9c17ccfac21
Reviewed-on: https://go-review.googlesource.com/37163
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
This doesn't change the functionality of the current code,
but it sets us up for exporting the profiling labels into the profile.
The old code had a hash table of profile samples maintained
during the signal handler, with evictions going into a log.
The new code just logs every sample directly, leaving the
hash-based deduplication to an ordinary goroutine.
The new code also avoids storing the entire profile in two
forms in memory, an unfortunate regression introduced
when binary profile support was added. After this CL the
entire profile is only stored once in memory. We'd still like
to get back down to storing it zero times (streaming it to
the underlying io.Writer).
Change-Id: I0893a1788267c564aa1af17970d47377b2a43457
Reviewed-on: https://go-review.googlesource.com/36712
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
It's common for some goroutines to loop calling time.Sleep.
Allocate once per goroutine, not every time.
This comes up in runtime/pprof's background reader.
Change-Id: I89d17dc7379dca266d2c9cd3aefc2382f5bdbade
Reviewed-on: https://go-review.googlesource.com/37162
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
The existing CPU profiling buffer is a slice of uintptr, but we want to
start including profiling label data in the profiles, and those labels need
to be pointers in order to let them describe rich information.
This CL implements a new profBuf type that holds both a slice of uint64
for data and a slice of unsafe.Pointer for profiling labels (aka tags).
Making the runtime use these buffers will happen in followup CLs.
Change-Id: I9ff16b532d8edaf4ce0cbba1098229a561834efc
Reviewed-on: https://go-review.googlesource.com/36713
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This updates the testcase to display the timestamps for the
runtime.a, it dependent packages atomic.a and sys.a, and
source files.
Change-Id: Id2901b4e8aa8eb9775c4f404ac01cc07b394ba91
Reviewed-on: https://go-review.googlesource.com/37332
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Suggested by Dmitry in CL 36792 review.
Clearly safe since there are many different semaRoots
that could all have profiled sudogs calling mutexevent.
Change-Id: I45eed47a5be3e513b2dad63b60afcd94800e16d1
Reviewed-on: https://go-review.googlesource.com/37104
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
We have seen one instance of a production job suddenly spinning to
100% CPU and becoming unresponsive. In that one instance, a SIGQUIT
was sent after 328 minutes of spinning, and the stacks showed a single
goroutine in "IO wait (scan)" state.
Looking for things that might get stuck if a goroutine got stuck in
scanning a stack, we found that injectglist does:
lock(&sched.lock)
var n int
for n = 0; glist != nil; n++ {
gp := glist
glist = gp.schedlink.ptr()
casgstatus(gp, _Gwaiting, _Grunnable)
globrunqput(gp)
}
unlock(&sched.lock)
and that casgstatus spins on gp.atomicstatus until the _Gscan bit goes
away. Essentially, this code locks sched.lock and then while holding
sched.lock, waits to lock gp.atomicstatus.
The code that is doing the scan is:
if castogscanstatus(gp, s, s|_Gscan) {
if !gp.gcscandone {
scanstack(gp, gcw)
gp.gcscandone = true
}
restartg(gp)
break loop
}
More analysis showed that scanstack can, in a rare case, end up
calling back into code that acquires sched.lock. For example:
runtime.scanstack at proc.go:866
calls runtime.gentraceback at mgcmark.go:842
calls runtime.scanstack$1 at traceback.go:378
calls runtime.scanframeworker at mgcmark.go:819
calls runtime.scanblock at mgcmark.go:904
calls runtime.greyobject at mgcmark.go:1221
calls (*runtime.gcWork).put at mgcmark.go:1412
calls (*runtime.gcControllerState).enlistWorker at mgcwork.go:127
calls runtime.wakep at mgc.go:632
calls runtime.startm at proc.go:1779
acquires runtime.sched.lock at proc.go:1675
This path was found with an automated deadlock-detecting tool.
There are many such paths but they all go through enlistWorker -> wakep.
The evidence strongly suggests that one of these paths is what caused
the deadlock we observed. We're running those jobs with
GOTRACEBACK=crash now to try to get more information if it happens
again.
Further refinement and analysis shows that if we drop the wakep call
from enlistWorker, the remaining few deadlock cycles found by the tool
are all false positives caused by not understanding the effect of calls
to func variables.
The enlistWorker -> wakep call was intended only as a performance
optimization, it rarely executes, and if it does execute at just the
wrong time it can (and plausibly did) cause the deadlock we saw.
Comment it out, to avoid the potential deadlock.
Fixes#19112.
Unfixes #14179.
Change-Id: I6f7e10b890b991c11e79fab7aeefaf70b5d5a07b
Reviewed-on: https://go-review.googlesource.com/37093
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This changes the os package to use the runtime poller for file I/O
where possible. When a system call blocks on a pollable descriptor,
the goroutine will be blocked on the poller but the thread will be
released to run other goroutines. When using a non-pollable
descriptor, the os package will continue to use thread-blocking system
calls as before.
For example, on GNU/Linux, the runtime poller uses epoll. epoll does
not support ordinary disk files, so they will continue to use blocking
I/O as before. The poller will be used for pipes.
Since this means that the poller is used for many more programs, this
modifies the runtime to only block waiting for the poller if there is
some goroutine that is waiting on the poller. Otherwise, there is no
point, as the poller will never make any goroutine ready. This
preserves the runtime's current simple deadlock detection.
This seems to crash FreeBSD systems, so it is disabled on FreeBSD.
This is issue 19093.
Using the poller on Windows requires opening the file with
FILE_FLAG_OVERLAPPED. We should only do that if we can remove that
flag if the program calls the Fd method. This is issue 19098.
Update #6817.
Update #7903.
Update #15021.
Update #18507.
Update #19093.
Update #19098.
Change-Id: Ia5197dcefa7c6fbcca97d19a6f8621b2abcbb1fe
Reviewed-on: https://go-review.googlesource.com/36800
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Since we're no longer stealing space for the stack barrier array from
the stack allocation, the stack allocation is simply
g.stack.hi-g.stack.lo.
Updates #17503.
Change-Id: Id9b450ae12c3df9ec59cfc4365481a0a16b7c601
Reviewed-on: https://go-review.googlesource.com/36621
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Now that we don't rescan stacks, stack barriers are unnecessary. This
removes all of the code and structures supporting them as well as
tests that were specifically for stack barriers.
Updates #17503.
Change-Id: Ia29221730e0f2bbe7beab4fa757f31a032d9690c
Reviewed-on: https://go-review.googlesource.com/36620
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
With the hybrid barrier, rescanning stacks is no longer necessary so
the rescan list is no longer necessary. Remove it.
This leaves the gcrescanstacks GODEBUG variable, since it's useful for
debugging, but changes it to simply walk all of the Gs to rescan
stacks rather than using the rescan list.
We could also remove g.gcscanvalid, which is effectively a distributed
rescan list. However, it's still useful for gcrescanstacks mode and it
adds little complexity, so we'll leave it in.
Fixes#17099.
Updates #17503.
Change-Id: I776d43f0729567335ef1bfd145b75c74de2cc7a9
Reviewed-on: https://go-review.googlesource.com/36619
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
The wbshadow implementation was removed a year and a half ago in
1635ab7dfe, but the GODEBUG setting remained. Remove the GODEBUG
setting since it doesn't do anything.
Change-Id: I19cde324a79472aff60acb5cc9f7d4aa86c0c0ed
Reviewed-on: https://go-review.googlesource.com/36618
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
For vet. There are more. This is a start.
Change-Id: Ibbbb2b20b5db60ee3fac4a1b5913d18fab01f6b9
Reviewed-on: https://go-review.googlesource.com/36939
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Extend period of fastrand from (1<<31)-1 to (1<<32)-1 by
choosing other polynom and reacting on high bit before shift.
Polynomial is taken at https://users.ece.cmu.edu/~koopman/lfsr/index.html
from 32.dat.gz . It is referred as F7711115 cause this list of
polynomials is for LFSR with shift to right (and fastrand uses shift to
left). (old polynomial is referred in 31.dat.gz as 7BB88888).
There were couple of places with conversation of fastrand to int, which
leads to negative values on 32bit platforms. They are fixed.
Change-Id: Ibee518a3f9103e0aea220ada494b3aec77babb72
Reviewed-on: https://go-review.googlesource.com/36875
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This will make it possible to use the poller with the os package.
This is a lot of code movement but the behavior is intended to be
unchanged.
Update #6817.
Update #7903.
Update #15021.
Update #18507.
Change-Id: I1413685928017c32df5654ded73a2643820977ae
Reviewed-on: https://go-review.googlesource.com/36799
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
When doing i.(T) for non-empty-interface i and concrete type T,
there's no need to read the type out of the itab. Just compare the
itab to the itab we expect for that interface/type pair.
Also optimize type switches by putting the type hash of the
concrete type in the itab. That way we don't need to load the
type pointer out of the itab.
Update #18492
Change-Id: I49e280a21e5687e771db5b8a56b685291ac168ce
Reviewed-on: https://go-review.googlesource.com/34810
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
Based on sample code from iant.
Fixes#18788.
Change-Id: I6bb33ed05af2538fbde42ddcac629280ef7c00a6
Reviewed-on: https://go-review.googlesource.com/36892
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
If there are many goroutines contending for two different locks
and both locks hash to the same semaRoot, the scans to find the
goroutines for a particular lock can end up being O(n), making
n lock acquisitions quadratic.
As long as only one actively-used lock hashes to each semaRoot
there's no problem, since the list operations in that case are O(1).
But when the second actively-used lock hits the same semaRoot,
then scans for entries with for a given lock have to scan over the
entries for the other lock.
Fix this problem by changing the semaRoot to hold only one sudog
per unique address. In the running example, this drops the length of
that list from O(n) to 2. Then attach other goroutines waiting on the
same address to a separate list headed by the sudog in the semaRoot list.
Those "same address list" operations are still O(1), so now the
example from above works much better.
There is still an assumption here that in real programs you don't have
many many goroutines queueing up on many many distinct addresses.
If we end up with that problem, we can replace the top-level list with
a treap.
Fixes#17953.
Change-Id: I78c5b1a5053845275ab31686038aa4f6db5720b2
Reviewed-on: https://go-review.googlesource.com/36792
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
So it could be inlined.
Using bit-tricks it could be implemented without condition
(improved trick version by Minux Ma).
Simple benchmark shows it is faster on i386 and x86_64, though
I don't know will it be faster on other architectures?
benchmark old ns/op new ns/op delta
BenchmarkFastrand-3 2.79 1.48 -46.95%
BenchmarkFastrandHashiter-3 25.9 24.9 -3.86%
Change-Id: Ie2eb6d0f598c0bb5fac7f6ad0f8b5e3eddaa361b
Reviewed-on: https://go-review.googlesource.com/34782
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If the user is calling SetGCPercent(-1), they intend to disable GC.
They probably don't intend to run one. If they do, they can call
runtime.GC themselves.
Change-Id: I40ef40dfc7e15193df9ff26159cd30e56b666f73
Reviewed-on: https://go-review.googlesource.com/34013
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
During the mark phase of garbage collection, goroutines that allocate
may be recruited to assist. This change creates trace events for mark
assists and displays them similarly to sweep assists in the trace
viewer.
Mark assists are different than sweeps in that they can be preempted, so
displaying them in the trace viewer is a little tricky -- we may need to
synthesize multiple slices for one mark assist. This could have been
done in the parser instead, but I thought it might be preferable to keep
the parser as true to the event stream as possible.
Change-Id: I381dcb1027a187a354b1858537851fa68a620ea7
Reviewed-on: https://go-review.googlesource.com/36015
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
These are very tightly coupled, and internal/protopprof is small.
There's no point to having a separate package.
Change-Id: I2c8aa49c9e18a7128657bf2b05323860151b5606
Reviewed-on: https://go-review.googlesource.com/36711
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The gcCompat mode was introduced to match the new parser's node position
setup exactly with the positions used by the original parser. Some of the
gcCompat adjustments were required to satisfy syntax error test cases,
and the rest were required to make toolstash cmp pass.
This change removes the former gcCompat adjustments and instead adjusts
the respective test cases as necessary. In some cases this makes the error
lines consistent with the ones reported by gccgo.
Where it has changed, the position associated with a given syntactic construct
is the position (line/col number) of the left-most token belonging to the
construct.
Change-Id: I5b60c00c5999a895c4d6d6e9b383c6405ccf725c
Reviewed-on: https://go-review.googlesource.com/36695
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This ensures that SIGPROF is handled correctly when using
runtime/pprof in a c-archive or c-shared library.
Separate profiler handling into pre-process changes and per-thread
changes. Simplify the Windows code slightly accordingly.
Fixes#18220.
Change-Id: I5060f7084c91ef0bbe797848978bdc527c312777
Reviewed-on: https://go-review.googlesource.com/34018
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
Fetch both monotonic and wall time together when possible.
Avoids skew and is cheaper.
Also shave a few ns off in conversion in package time.
Compared to current implementation (after monotonic changes):
name old time/op new time/op delta
Now 19.6ns ± 1% 9.7ns ± 1% -50.63% (p=0.000 n=41+49) darwin/amd64
Now 23.5ns ± 4% 10.6ns ± 5% -54.61% (p=0.000 n=30+28) windows/amd64
Now 54.5ns ± 5% 29.8ns ± 9% -45.40% (p=0.000 n=27+29) windows/386
More importantly, compared to Go 1.8:
name old time/op new time/op delta
Now 9.5ns ± 1% 9.7ns ± 1% +1.94% (p=0.000 n=41+49) darwin/amd64
Now 12.9ns ± 5% 10.6ns ± 5% -17.73% (p=0.000 n=30+28) windows/amd64
Now 15.3ns ± 5% 29.8ns ± 9% +94.36% (p=0.000 n=30+29) windows/386
This brings time.Now back in line with Go 1.8 on darwin/amd64 and windows/amd64.
It's not obvious why windows/386 is still noticeably worse than Go 1.8,
but it's better than before this CL. The windows/386 speed is not too
important; the changes just keep the two architectures similar.
Change-Id: If69b94970c8a1a57910a371ee91e0d4e82e46c5d
Reviewed-on: https://go-review.googlesource.com/36428
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The fwdSig array is accessed by the signal handler, which may run in
parallel with other threads manipulating it via the os/signal package.
Use atomic accesses to ensure that there are no problems.
Move the _SigHandling flag out of the sigtable array. This makes sigtable
immutable and safe to read from the signal handler.
Change-Id: Icfa407518c4ebe1da38580920ced764898dfc9ad
Reviewed-on: https://go-review.googlesource.com/36321
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently both _MaxMem and _MaxArena32 represent the maximum arena
size on 32-bit hosts (except on MIPS32 where _MaxMem is confusingly
smaller than _MaxArena32).
Clean up sysAlloc so that it always uses _MaxMem, which is the maximum
arena size on both 32- and 64-bit architectures and is the arena size
we allocate auxiliary structures for. This lets us simplify and unify
some code paths and eliminate _MaxArena32.
Fixes#18651. mheap.sysAlloc currently assumes that if the arena is
small, we must be on a 32-bit machine and can therefore grow the arena
to _MaxArena32. This breaks down on darwin/arm64, where _MaxMem is
only 2 GB. As a result, on darwin/arm64, we only reserve spans and
bitmap space for a 2 GB heap, and if the application tries to allocate
beyond that, sysAlloc takes the 32-bit path, tries to grow the arena
beyond 2 GB, and panics when it tries to grow the spans array
allocation past its reserved size. This has probably been a problem
for several releases now, but was only noticed recently because
mapSpans didn't check the bounds on the span reservation until
recently. Most likely it corrupted the bitmap before. By using _MaxMem
consistently, we avoid thinking that we can grow the arena larger than
we have auxiliary structures for.
Change-Id: Ifef28cb746a3ead4b31c1d7348495c2242fef520
Reviewed-on: https://go-review.googlesource.com/35253
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Elias Naur <elias.naur@gmail.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
mallocinit has evolved organically. Make a pass to clean it up in
various ways:
1. Merge the computation of spansSize and bitmapSize. These were
computed on every loop iteration of two different loops, but always
have the same value, which can be derived directly from _MaxMem.
This also avoids over-reserving these on MIPS, were _MaxArena32 is
larger than _MaxMem.
2. Remove the ulimit -v logic. It's been disabled for many releases
and the dead code paths to support it are even more wrong now than
they were when it was first disabled, since now we *must* reserve
spans and bitmaps for the full address space.
3. Make it clear that we're using a simple linear allocation to lay
out the spans, bitmap, and arena spaces. Previously there were a
lot of redundant pointer computations. Now we just bump p1 up as we
reserve the spaces.
In preparation for #18651.
Updates #5049 (respect ulimit).
Change-Id: Icbe66570d3a7a17bea227dc54fb3c4978b52a3af
Reviewed-on: https://go-review.googlesource.com/35252
Reviewed-by: Russ Cox <rsc@golang.org>
Currently _MaxMem is a uintptr, which is going to complicate some
further changes. Make it untyped so we'll be able to do untyped math
on it before truncating it to a uintptr.
The runtime assembly is identical before and after this change on
{linux,windows}/{amd64,386}.
Updates #18651.
Change-Id: I0f64511faa9e0aa25179a556ab9f185ebf8c9cf8
Reviewed-on: https://go-review.googlesource.com/35251
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
This change defines runtime/pprof.SetGoroutineLabels and runtime/pprof.Do, which
are used to set profiler labels on goroutines. The change defines functions
in the runtime for setting and getting profile labels, and sets and unsets
profile labels when goroutines are created and deleted. The change also adds
the package runtime/internal/proflabel, which defines the structure the runtime
uses to store profile labels.
Change-Id: I747a4400141f89b6e8160dab6aa94ca9f0d4c94d
Reviewed-on: https://go-review.googlesource.com/34198
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-on: https://go-review.googlesource.com/35010
This change defines WithLabels, Labels, Label, and ForLabels.
This is the first step of the profile labels implemention for go 1.9.
Updates #17280
Change-Id: I2dfc9aae90f7a4aa1ff7080d5747f0a1f0728e75
Reviewed-on: https://go-review.googlesource.com/34198
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
It's not used, it's never been used, and it doesn't do what its doc
comment says it does.
Fixes#18941.
Change-Id: Ia89d97fb87525f5b861d7701f919e0d6b7cbd376
Reviewed-on: https://go-review.googlesource.com/36322
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Before this CL, Go programs in c-archive or c-shared buildmodes
would not handle SIGPIPE. That leads to surprising behaviour where
writes on a closed pipe or socket would raise SIGPIPE and terminate
the program. This CL changes the Go runtime to handle
SIGPIPE regardless of buildmode. In addition, SIGPIPE from non-Go
code is forwarded.
This is a refinement of CL 32796 that fixes the case where a non-default
handler for SIGPIPE is installed by the host C program.
Fixes#17393
Change-Id: Ia41186e52c1ac209d0a594bae9904166ae7df7de
Reviewed-on: https://go-review.googlesource.com/35960
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
sigtramp was calling sigtrampgo and depending on the fact that
the 3rd argument slot will not be modified on return. Our calling
convention doesn't guarantee that. Avoid that assumption.
There's no actual bug here, as sigtrampgo does not in fact modify its
argument slots. But I found this while working on the dead stack slot
clobbering tool. https://go-review.googlesource.com/c/23924/
Change-Id: Ia7e791a2b4c1c74fff24cba8169e7840b4b06ffc
Reviewed-on: https://go-review.googlesource.com/36216
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It seems the problem is on gdb and the dynamic linker. Skip the
test for now until we figure out what's going on with the system.
Updates #18784.
Change-Id: Ic9320ffd463f6c231b2c4192652263b1cf7f4231
Reviewed-on: https://go-review.googlesource.com/36250
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The existing darwin/amd64 implementation of runtime.nanotime returns the
wallclock time, which results in timers not functioning properly when
system time runs backwards. By implementing the algorithm used by the
darwin syscall mach_absolute_time, timers will function as expected.
The algorithm is described at
https://opensource.apple.com/source/xnu/xnu-3248.60.10/libsyscall/wrappers/mach_absolute_time.sFixes#17610
Change-Id: I9c8d35240d48249a6837dca1111b1406e2686f67
Reviewed-on: https://go-review.googlesource.com/35292
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
For #18130.
f8b4123613 [dev.typealias] spec: use term 'embedded field' rather than 'anonymous field'
9ecc3ee252 [dev.typealias] cmd/compile: avoid false positive cycles from type aliases
49b7af8a30 [dev.typealias] reflect: add test for type aliases
9bbb07ddec [dev.typealias] cmd/compile, reflect: fix struct field names for embedded byte, rune
43c7094386 [dev.typealias] reflect: fix StructOf use of StructField to match StructField docs
9657e0b077 [dev.typealias] cmd/doc: update for type alias
de2e5459ae [dev.typealias] cmd/compile: declare methods after resolving receiver type
9259f3073a [dev.typealias] test: match gccgo error messages on alias2.go
5d92916770 [dev.typealias] cmd/compile: change Func.Shortname to *Sym
a7c884efc1 [dev.typealias] go/internal/gccgoimporter: support for type aliases
5802cfd900 [dev.typealias] cmd/compile: export/import test cases for type aliases
d7cabd40dd [dev.typealias] go/types: clarified doc string
cc2dcce3d7 [dev.typealias] cmd/compile: a few better comments related to alias types
5c160b28ba [dev.typealias] cmd/compile: improved error message for cyles involving type aliases
b2386dffa1 [dev.typealias] cmd/compile: type-check type alias declarations
ac8421f9a5 [dev.typealias] cmd/compile: various minor cleanups
f011e0c6c3 [dev.typealias] cmd/compile, go/types, go/importer: various alias related fixes
49de5f0351 [dev.typealias] cmd/compile, go/importer: define export format and implement importing of type aliases
5ceec42dc0 [dev.typealias] go/types: export TypeName.IsAlias so clients can use it
aa1f0681bc [dev.typealias] go/types: improved Object printing
c80748e389 [dev.typealias] go/types: remove some more vestiges of prior alias implementation
80d8b69e95 [dev.typealias] go/types: implement type aliases
a917097b5e [dev.typealias] go/build: add go1.9 build tag
3e11940437 [dev.typealias] cmd/compile: recognize type aliases but complain for now (not yet supported)
e0a05c274a [dev.typealias] cmd/gofmt: added test cases for alias type declarations
2e5116bd99 [dev.typealias] go/ast, go/parser, go/printer, go/types: initial type alias support
Change-Id: Ia65f2e011fd7195f18e1dce67d4d49b80a261203
This avoids errors like
./traceback.go:80:2: call of non-function C.f1
I filed https://gcc.gnu.org/PR79289 for the GCC problem. I think this
is a bug in GCC, and it may be fixed before the final GCC 7 release.
This CL is correct either way.
Fixes#18855.
Change-Id: I0785a7b7c5b1d0ca87b454b5eca9079f390fcbd4
Reviewed-on: https://go-review.googlesource.com/35919
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Modules appear in the moduledata linked list in the order they are
loaded by the dynamic loader, with one exception: the
firstmoduledata itself the module that contains the runtime.
This is not always the first module (when using -buildmode=shared,
it is typically libstd.so, the second module).
The order matters for typelinksinit, so we swap the first module
with whatever module contains the main function.
Updates #18729
This fixes the test case extracted with -linkshared, and now
go test -linkshared encoding/...
passes. However the original issue about a plugin failure is not
yet fixed.
Change-Id: I9f399ecc3518e22e6b0a350358e90b0baa44ac96
Reviewed-on: https://go-review.googlesource.com/35644
Run-TryBot: David Crawshaw <crawshaw@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Will also fix type aliases.
Fixes#17766.
For #18130.
Change-Id: I9e1584d47128782152e06abd0a30ef423d5c30d2
Reviewed-on: https://go-review.googlesource.com/35732
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Otherwise we don't emit any required ELF relocations when doing an
external link, because elfrelocsect skips unreachable symbols.
Fixes#18745.
Change-Id: Ia3583c41bb6c5ebb7579abd26ed8689370311cd6
Reviewed-on: https://go-review.googlesource.com/35590
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
memmove used to use 2 2-byte load/store pairs to move 4 bytes.
When the result is loaded with a single 4-byte load, it caused
a store to load fowarding stall. To avoid the stall,
special case memmove to use 4 byte ops for the 4 byte copy case.
We already have a special case for 8-byte copies.
386 already specializes 4-byte copies.
I'll do 2-byte copies also, but not for 1.8.
benchmark old ns/op new ns/op delta
BenchmarkIssue18740-8 7567 4799 -36.58%
3-byte copies get a bit slower. Other copies are unchanged.
name old time/op new time/op delta
Memmove/3-8 4.76ns ± 5% 5.26ns ± 3% +10.50% (p=0.000 n=10+10)
Fixes#18740
Change-Id: Iec82cbac0ecfee80fa3c8fc83828f9a1819c3c74
Reviewed-on: https://go-review.googlesource.com/35567
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Currently we check that all roots are marked as soon as gcMarkDone
decides to transition from mark 1 to mark 2. However, issue #16083
indicates that there may be a race where we try to complete mark 1
while a worker is still scanning a stack, causing the root mark check
to fail.
We don't yet understand this race, but as a simple mitigation, move
the root check to after gcMarkDone performs a ragged barrier, which
will force any remaining workers to finish their current job.
Updates #16083. This may "fix" it, but it would be better to
understand and fix the underlying race.
Change-Id: I1af9ce67bd87ade7bc2a067295d79c28cd11abd2
Reviewed-on: https://go-review.googlesource.com/35353
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>
We already do this for shared libraries. Do it for plugins also.
Suggestions on how to test this would be welcome.
I'd like to get this in for 1.8. It could lead to mysterious
hangs when using plugins.
Fixes#18676
Change-Id: I03209b096149090b9ba171c834c5e59087ed0f92
Reviewed-on: https://go-review.googlesource.com/35117
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Michael Hudson-Doyle <michael.hudson@canonical.com>
Use R11 (a caller-saved temp register) instead of RBX (a callee-saved
register).
I believe this only affects linux/amd64, since it is the only platform
with a non-trivial cgoSigtramp implementation.
Updates #18328.
Change-Id: I3d35c4512624184d5a8ece653fa09ddf50e079a2
Reviewed-on: https://go-review.googlesource.com/35068
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Loop breaking with a counter. Benchmarked (see comments),
eyeball checked for sanity on popular loops. This code
ought to handle loops in general, and properly inserts phi
functions in cases where the earlier version might not have.
Includes test, plus modifications to test/run.go to deal with
timeout and killing looping test. Tests broken by the addition
of extra code (branch frequency and live vars) for added
checks turn the check insertion off.
If GOEXPERIMENT=preemptibleloops, the compiler inserts reschedule
checks on every backedge of every reducible loop. Alternately,
specifying GO_GCFLAGS=-d=ssa/insert_resched_checks/on will
enable it for a single compilation, but because the core Go
libraries contain some loops that may run long, this is less
likely to have the desired effect.
This is intended as a tool to help in the study and diagnosis
of GC and other latency problems, now that goal STW GC latency
is on the order of 100 microseconds or less.
Updates #17831.
Updates #10958.
Change-Id: I6206c163a5b0248e3f21eb4fc65f73a179e1f639
Reviewed-on: https://go-review.googlesource.com/33910
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Change-Id: I429637ca91f7db4144f17621de851a548dc1ce76
Reviewed-on: https://go-review.googlesource.com/34923
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
To implement the blocking of a select, a goroutine builds a list of
offers to communicate (pseudo-g's, aka sudog), one for each case,
queues them on the corresponding channels, and waits for another
goroutine to complete one of those cases and wake it up. Obviously it
is not OK for two other goroutines to complete multiple cases and both
wake the goroutine blocked in select. To make sure that only one
branch of the select is chosen, all the sudogs contain a pointer to a
shared (single) 'done uint32', which is atomically cas'ed by any
interested goroutines. The goroutine that wins the cas race gets to
wake up the select. A complication is that 'done uint32' is stored on
the stack of the goroutine running the select, and that stack can move
during the select due to stack growth or stack shrinking.
The relevant ordering to block and unblock in select is:
1. Lock all channels.
2. Create list of sudogs and queue sudogs on all channels.
3. Switch to system stack, mark goroutine as asleep,
unlock all channels.
4. Sleep until woken.
5. Wake up on goroutine stack.
6. Lock all channels.
7. Dequeue sudogs from all channels.
8. Free list of sudogs.
9. Unlock all channels.
There are two kinds of stack moves: stack growth and stack shrinking.
Stack growth happens while the original goroutine is running.
Stack shrinking happens asynchronously, during garbage collection.
While a channel listing a sudog is locked by select in this process,
no other goroutine can attempt to complete communication on that
channel, because that other goroutine doesn't hold the lock and can't
find the sudog. If the stack moves while all the channel locks are
held or when the sudogs are not yet or no longer queued in the
channels, no problem, because no goroutine can get to the sudogs and
therefore to selectdone. We only need to worry about the stack (and
'done uint32') moving with the sudogs queued in unlocked channels.
Stack shrinking can happen any time the goroutine is stopped.
That code already acquires all the channel locks before doing the
stack move, so it avoids this problem.
Stack growth can happen essentially any time the original goroutine is
running on its own stack (not the system stack). In the first half of
the select, all the channels are locked before any sudogs are queued,
and the channels are not unlocked until the goroutine has stopped
executing on its own stack and is asleep, so that part is OK. In the
second half of the select, the goroutine wakes up on its own goroutine
stack and immediately locks all channels. But the actual call to lock
might grow the stack, before acquiring any locks. In that case, the
stack is moving with the sudogs queued in unlocked channels. Not good.
One goroutine has already won a cas on the old stack (that goroutine
woke up the selecting goroutine, moving it out of step 4), and the
fact that done = 1 now should prevent any other goroutines from
completing any other select cases. During the stack move, however,
sudog.selectdone is moved from pointing to the old done variable on
the old stack to a new memory location on the new stack. Another
goroutine might observe the moved pointer before the new memory
location has been initialized. If the new memory word happens to be
zero, that goroutine might win a cas on the new location, thinking it
can now complete the select (again). It will then complete a second
communication (reading from or writing to the goroutine stack
incorrectly) and then attempt to wake up the selecting goroutine,
which is already awake.
The scribbling over the goroutine stack unexpectedly is already bad,
but likely to go unnoticed, at least immediately. As for the second
wakeup, there are a variety of ways it might play out.
* The goroutine might not be asleep.
That will produce a runtime crash (throw) like in #17007:
runtime: gp: gp=0xc0422dcb60, goid=2299, gp->atomicstatus=8
runtime: g: g=0xa5cfe0, goid=0, g->atomicstatus=0
fatal error: bad g->status in ready
Here, atomicstatus=8 is copystack; the second, incorrect wakeup is
observing that the selecting goroutine is in state "Gcopystack"
instead of "Gwaiting".
* The goroutine might be sleeping in a send on a nil chan.
If it wakes up, it will crash with 'fatal error: unreachable'.
* The goroutine might be sleeping in a send on a non-nil chan.
If it wakes up, it will crash with 'fatal error: chansend:
spurious wakeup'.
* The goroutine might be sleeping in a receive on a nil chan.
If it wakes up, it will crash with 'fatal error: unreachable'.
* The goroutine might be sleeping in a receive on a non-nil chan.
If it wakes up, it will silently (incorrectly!) continue as if it
received a zero value from a closed channel, leaving a sudog queued on
the channel pointing at that zero vaue on the goroutine's stack; that
space will be reused as the goroutine executes, and when some other
goroutine finally completes the receive, it will do a stray write into
the goroutine's stack memory, which may cause problems. Then it will
attempt the real wakeup of the goroutine, leading recursively to any
of the cases in this list.
* The goroutine might have been running a select in a finalizer
(I hope not!) and might now be sleeping waiting for more things to
finalize. If it wakes up, as long as it goes back to sleep quickly
(before the real GC code tries to wake it), the spurious wakeup does
no harm (but the stack was still scribbled on).
* The goroutine might be sleeping in gcParkAssist.
If it wakes up, that will let the goroutine continue executing a bit
earlier than we would have liked. Eventually the GC will attempt the
real wakeup of the goroutine, leading recursively to any of the cases
in this list.
* The goroutine cannot be sleeping in bgsweep, because the background
sweepers never use select.
* The goroutine might be sleeping in netpollblock.
If it wakes up, it will crash with 'fatal error: netpollblock:
corrupted state'.
* The goroutine might be sleeping in main as another thread crashes.
If it wakes up, it will exit(0) instead of letting the other thread
crash with a non-zero exit status.
* The goroutine cannot be sleeping in forcegchelper,
because forcegchelper never uses select.
* The goroutine might be sleeping in an empty select - select {}.
If it wakes up, it will return to the next line in the program!
* The goroutine might be sleeping in a non-empty select (again).
In this case, it will wake up spuriously, with gp.param == nil (no
reason for wakeup), but that was fortuitously overloaded for handling
wakeup due to a closing channel and the way it is handled is to rerun
the select, which (accidentally) handles the spurious wakeup
correctly:
if cas == nil {
// This can happen if we were woken up by a close().
// TODO: figure that out explicitly so we don't need this loop.
goto loop
}
Before looping, it will dequeue all the sudogs on all the channels
involved, so that no other goroutine will attempt to wake it.
Since the goroutine was blocked in select before, being blocked in
select again when the spurious wakeup arrives may be quite likely.
In this case, the spurious wakeup does no harm (but the stack was
still scribbled on).
* The goroutine might be sleeping in semacquire (mutex slow path).
If it wakes up, that is taken as a signal to try for the semaphore
again, not a signal that the semaphore is now held, but the next
iteration around the loop will queue the sudog a second time, causing
a cycle in the wakeup list for the given address. If that sudog is the
only one in the list, when it is eventually dequeued, it will
(due to the precise way the code is written) leave the sudog on the
queue inactive with the sudog broken. But the sudog will also be in
the free list, and that will eventually cause confusion.
* The goroutine might be sleeping in notifyListWait, for sync.Cond.
If it wakes up, (*Cond).Wait returns. The docs say "Unlike in other
systems, Wait cannot return unless awoken by Broadcast or Signal,"
so the spurious wakeup is incorrect behavior, but most callers do not
depend on that fact. Eventually the condition will happen, attempting
the real wakeup of the goroutine and leading recursively to any of the
cases in this list.
* The goroutine might be sleeping in timeSleep aka time.Sleep.
If it wakes up, it will continue running, leaving a timer ticking.
When that time bomb goes off, it will try to ready the goroutine
again, leading to any one of the cases in this list.
* The goroutine cannot be sleeping in timerproc,
because timerproc never uses select.
* The goroutine might be sleeping in ReadTrace.
If it wakes up, it will print 'runtime: spurious wakeup of trace
reader' and return nil. All future calls to ReadTrace will print
'runtime: ReadTrace called from multiple goroutines simultaneously'.
Eventually, when trace data is available, a true wakeup will be
attempted, leading to any one of the cases in this list.
None of these fatal errors appear in any of the trybot or dashboard
logs. The 'bad g->status in ready' that happens if the goroutine is
running (the most likely scenario anyway) has happened once on the
dashboard and eight times in trybot logs. Of the eight, five were
atomicstatus=8 during net/http tests, so almost certainly this bug.
The other three were atomicstatus=2, all near code in select,
but in a draft CL by Dmitry that was rewriting select and may or may
not have had its own bugs.
This bug has existed since Go 1.4. Until then the select code was
implemented in C, 'done uint32' was a C stack variable 'uint32 done',
and C stacks never moved. I believe it has become more common recently
because of Brad's work to run more and more tests in net/http in
parallel, which lengthens race windows.
The fix is to run step 6 on the system stack,
avoiding possibility of stack growth.
Fixes#17007 and possibly other mysterious failures.
Change-Id: I9d6575a51ac96ae9d67ec24da670426a4a45a317
Reviewed-on: https://go-review.googlesource.com/34835
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This adds high-level descriptions of the scheduler structures, the
user and system stacks, error handling, and synchronization.
Change-Id: I1eed97c6dd4a6e3d351279e967b11c6e64898356
Reviewed-on: https://go-review.googlesource.com/34290
Reviewed-by: Rick Hudson <rlh@golang.org>
The comment describing the overall GC algorithm at the top of mgc.go
has gotten woefully out-of-date (and was possibly never
correct/complete). Update it to reflect the current workings of the
GC and the set of phases that we now divide it into.
Change-Id: I02143c0ebefe9d4cd7753349dab8045f0973bf95
Reviewed-on: https://go-review.googlesource.com/34711
Reviewed-by: Rick Hudson <rlh@golang.org>
Currently, the check for legal pointers in stack copying uses
_PageSize (8K) as the minimum legal pointer. By default, Linux won't
let you map under 64K, but
1) it's less clear what other OSes allow or will allow in the future;
2) while mapping the first page is a terrible idea, mapping anywhere
above that is arguably more justifiable;
3) the compiler only assumes the first physical page (4K) is never
mapped.
Make the runtime consistent with the compiler and more robust by
changing the bad pointer check to use 4K as the minimum legal pointer.
This came out of discussions on CLs 34663 and 34719.
Change-Id: Idf721a788bd9699fb348f47bdd083cf8fa8bd3e5
Reviewed-on: https://go-review.googlesource.com/34890
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
The existing implementations on AMD64 only detects AVX2 usability,
when they also contains BMI (bit-manipulation instructions).
These instructions crash the running program as 'unknown instructions'
on the architecture, e.g. i3-4000M, which supports AVX2 but not
support BMI.
This change added the detections for BMI1 and BMI2 to AMD64 runtime with
two flags as the result, `support_bmi1` and `support_bmi2`,
in runtime/runtime2.go. It also completed the condition to run AVX2 version
in packages crypto/sha1 and crypto/sha256.
Fixes#18512
Change-Id: I917bf0de365237740999de3e049d2e8f2a4385ad
Reviewed-on: https://go-review.googlesource.com/34850
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Android on ChromeOS uses a restrictive seccomp filter that blocks
sched_getaffinity, leading this code to index a slice by -errno.
Change-Id: Iec09a4f79dfbc17884e24f39bcfdad305de75b37
Reviewed-on: https://go-review.googlesource.com/34794
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Fixes misc/cgo/testsigfwd, enabled for mips{,le} with the next commit
(https://golang.org/cl/34646).
Change-Id: I2bec894b0492fd4d84dd73a4faa19eafca760107
Reviewed-on: https://go-review.googlesource.com/34645
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
